Describe the differences seen in the properties of Boron and Nitrogen.​

Answer:

a) [COHNH₂] = 0.001 mol/L, [NH₃] = [CO] = 0.085 mol/L

b) 5.59 atm

Explanation:

a) The decomposition reaction of formamide is the following:

COHNH₂(d)  ⇆  NH₃(g) + CO(g)    

The equilibrium constant of the reaction above is:

[tex]K_{c} = \frac{[NH_{3}][CO]}{[COHNH_{2}]} = 4.84 (400 K)[/tex]

The initial concentration of formamide is:

[tex] C_{COHNH_{2}} = \frac{\eta}{V} = \frac{0.186 moles}{2.16 L} = 0.086 mol/L [/tex]

Where: η is the number of moles and V is the volume

Now, in the equilibrium the concentration of all species is:

COHNH₂(d)  ⇆  NH₃(g) + CO(g)  

0.086 - x              x             x

[tex] K_{c} = \frac{[NH_{3}][CO]}{[COHNH_{2}]} = \frac{x*x}{0.086 - x} [/tex]  

[tex] 4.84*(0.086 - x) -x^{2} = 0 [/tex]

By solving the above equation for x we have:

x = 0.085 mol/L = [NH₃] = [CO]

[COHNH₂] = 0.086 - 0.085 = 0.001 mol/L

Therefore, the concentrations of all species present at equilibrium at 400 K is [NH₃] = [CO] = 0.085 mol/L and [COHNH₂] = 0.001 mol/L.

b) To find the total pressure in the container we need to find first the constant Kp as follows:

[tex] K_{p} = K_{c}*RT^{\Delta n} [/tex]

Where R is the gas constant = 0.082 Latm/(Kmol), T is the temperature = 400 K and Δn = 1

[tex] K_{p} = K_{c}*RT^{\Delta n} = 4.84*(0.082*400)^{1} = 158.8 [/tex]

Now, the total pressure is:

[tex] p_{T} = p_{COHNH_{2}} + p_{NH_{3}} + p_{CO} [/tex]

The pressure of COHNH₂ can be found using Ideal Gas Law:

[tex] P = \frac{nRT}{V} = \frac{0.186 moles*0.082 L*atm/(K*mol)*400 K}{2.16 L} = 2.82 atm [/tex]

Using the equilibrium constant we can find the pressure of NH₃ and CO:

COHNH₂(d)  ⇆  NH₃(g) + CO(g)  

2.82 - x              x             x

[tex] K_{p} = \frac{P_{NH_{3}}*P_{CO}}{P_{COHNH_{2}}} [/tex]

[tex] 158.8*(2.82 - x) - x^{2} = 0 [/tex]

By solving the above equation for x we have:

[tex] x = P_{NH_{3}} = P_{CO} = 2.77 atm [/tex]

[tex] P_{COHNH_{2}} = 2.82 - 2.77 = 0.05 atm [/tex]

Thus, the total pressure is:

[tex] p_{T} = p_{COHNH_{2}} + p_{NH_{3}} + p_{CO} = (0.05 + 2.77 + 2.77) atm = 5.59 atm [/tex]

Hence, the total pressure in the container at equilibrium is 5.59 atm.

I hope it helps you!

Answer:

False

Explanation:

Catalysts are reusable because they keep the chemical reactions moving without being consumed.

Answer:

C. the substance in which the solute dissolves

Explanation:

There are two terms in this... the solute and the solvent. The way I learned how to remember this is with a little pirate analogy: The loot (stolen treasure) always goes in the vent. So, the soLUTE goes in the solVENT.

Answer:

X= -Y + 2/2     Y=-X + 3/2

Explanation:

I don't know how to simplify it anymore. You would get x=-y+3/2 and y=-x+3/2

Answer:

Explanation:

(-1/2,1)

Answer:

Different

Explanation:

Answer:

. A homogeneous mixture of a solid in a gas

A chemical  reaction involves the interaction of reactants. The substance X ,must be an acid and in this case is CH3COOH

In chemistry, a reaction is said to occur when substances interact in such a way that other new substances are formed.

Now let us look at the particular reaction; NaOH + X ----> NaCH3COO + H2O. The substance X must be an acid. Hence, the most likely susbstance is CH3COOH.

Learn more about reaction: https://brainly.com/question/22817140

Answer:

[OH] = 6.31 * 10^-7 M

Explanation:

Mathematically;

pH + pOH = 14

Mathematically;

pH = -log [H3O+]

also;

pOH = -log [OH]

From the question; [H3O+] = 1.75 * 10^-8 M

pH = -log [1.75 * 10^-8]

pH = 7.76

since pH is normally given to 1 decimal place

we can say pH = 7.8

Now;

pH + pOH = 14

pOH = 14-7.8

pOH = 6.2

now pOH = -log [OH]

[OH] = -antilog 6.2

[OH] = 6.31 * 10^-7 M

Answer:

147.222 degrees C

Explanation:

assuming its  297 F it should be correct

The temperature outside is 297°F then this temperature in celsius is equal to 147.22 °C.

Temperature can be described as a physical quantity that expresses quantitatively the perceptions of hotness or coldness. The most general scales are the Celsius scale with (°C), the Fahrenheit scale (°F), and the Kelvin scale (K), the latter being used predominantly for scientific purposes.

Fahrenheit to Celsius formula can be used to change the temperature from the scale Fahrenheit to degrees Celsius.

The formula that can be used to convert Fahrenheit to Celsius is given below:

[tex]\dusplaystyle ^oC = (^oF - 32) \times \frac{5}{9}[/tex]

Here, F represents the temperature in Fahrenheit, and C represents the temperature in Celsius.

Given the temperature in Fahrenheit = 297 °F

[tex]\dusplaystyle T( ^oC) = (297 - 32) \times \frac{5}{9}[/tex]

T = 147.22 °C

Therefore, the given temperature in celsius is equal to 147.22 °C.

Learn more about temperature, here:

https://brainly.com/question/14453171

#SPJ2

Answer:

23.6°C

Explanation:

Step 1:

Data obtained from the question. This include the following:

Mass = 0.125kg = 0.125 x 1000 = 125g

Initial temperature (T1) = 22°C

Heat (Q) generated in 4.5mins = 835J

Specific heat capacity (C) of water = 4.184J/g°C

Change in temperature (ΔT) =?

Final temperature (T2) =?

Step 2:

Determination of the change in temperature, ΔT of water.

This can be obtained as shown below:

Q = MCΔT

835 = 125 x 4.184 x ΔT

Divide both side by 125 x 4.184

ΔT = 835 / (125 x 4.184)

ΔT = 1.6°C

Therefore, the change in temperature, ΔT is 1.6°C

Step 3:

Determination of the final temperature of water.

This can be obtained as follow:

Initial temperature (T1) = 22°C

Change in temperature (ΔT) = 1.6°C

Final temperature (T2) =?

Change in temperature (ΔT) = Initial temperature – Final temperature

ΔT = T2 – T1

1.6 = T2 – 22

Collect like terms

T2 = 1.6 + 22

T2 = 23.6°C

Therefore, the final temperature of the water is 23.6°C.

Answer:idioma equivocado ????

Explanation:

Answer:

4

Explanation:

Answer:

C Gamma Rays

Explanation:

Radio waves, on the other hand, have the lowest energies, longest wavelengths, and lowest frequencies of any type of EM radiation. In order from highest to lowest energy, the sections of the EM spectrum are named: *gamma rays* ,X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves.

Explanation:

Copper(II) carbonate basic, CuCO3•Cu(OH)2(s), is the dull green colour that forms on copper roofs. Copper oxidises in the air to form an approximately equimolar mixture of CuCO3 and Cu(OH)2.The percentage of CuCO3 in the

Answer:

The angular alignment is 90 degrees

Explanation:

The neap tide is a type of tide which occurs around seven days after a spring tide. This type of tide happens twice every month.

The tide is usually moderate and it exists when the sun and moon are usually at right angles to each other when it occurs. A right angle is also known as 90 degrees which validates the tide occurring at an angle 90.

Answer:

5SiO[tex]_{2}[/tex] + 2CaC[tex]_{2}[/tex] → 5Si + 2CaO + 4CO[tex]_{2}[/tex]

5   2   5   2   4  are your answers.

Answer:

2.5 g of platinum

Explanation:

Recall that a catalyst is a specie added to a reaction system to increase the rate of reaction. A catalyst does not participate in the chemical reaction hence it remains unchanged at the end of the chemical reaction. A catalyst merely provides an alternative reaction pathway by lowering the activation energy of the reaction system. Hence a catalysed reaction usually proceeds faster with less energy requirement than the uncatalysed reaction.

Since the catalyst does not participate in the reactions and remains unchanged at the end of the reaction, the mass of platinum will remain the same (2.5g). The mass can only change if a specie participates in the chemical reaction. Hence the answer.

2.5 g of platinum will there be left in the vessel at the end of the reaction

The following information should be considered:

learn more: https://brainly.com/question/2514933?referrer=searchResults

Answer: Energy is removed from the particles in each change, but more energy is removed in melting than in boiling because the attractions are weaker. Energy is removed from the particles in each change, but more energy is removed in boiling than in melting because the attractions are weaker. Energy is added to the particles in each change, but boiling requires more energy than melting because the attractions must be completely overcome. Energy is added to the particles in each change, but melting requires more energy than boiling because the attractions must be completely overcome.  

Answer:

C. The product must solve the problem for which it was designed.

Explanation:

Technological design is the study, development and application of technological process with the intent of designing a product to solve required problem.The process could be based on the use of a computer.

Generally, technological process and development always tend to design a problem solver product. Through this process, more new technologies are produced.

Therefore in technological process, the product must solve the problem for which it was designed.

Answer:

C) The product must solve the problem for which it was designed.

Answer:

a

2.0 M

Explanation:

divide 6by 3

formula :  molarity=moles divided by volume of solutions

Answer:

D) The attractive force decreases as the atom gets larger.

Explanation:

i did the lesson and tried all 3, all 3 times, this was the last one and only choice left so it has to be.

Answer:

The attractive force decreases as the atom gets larger.

Explanation:

Given question is incomplete. The complete question is as follows.

Balance the following equation:

[tex]H_3PO_4 + Ca(OH)_2 \rightarrow Ca(H_2PO_4)_2 + H_2O[/tex]

Answer: The balanced chemical equation is as follows.

[tex]2H_3PO_4 + Ca(OH)_2 \rightarrow Ca(H_2PO_4)_2 + 2H_2O[/tex]

Explanation:

When a chemical equation contains same number of atoms on both reactant and product side then this equation is known as balanced equation.

For example, [tex]H_3PO_4 + Ca(OH)_2 \rightarrow Ca(H_2PO_4)_2 + H_2O[/tex]

Number of atoms on reactant side:

H = 5

P = 1

O = 6

Ca = 1

Number of atoms on product side:

H = 6

P = 2

O = 9

Ca = 1

In order to balance this equation, we will multiply [tex]H_3PO_4[/tex] by 2 on reactant side and we will multiply [tex]H_2O[/tex] by 2 on product side. Hence, the balanced chemical equation is as follows.

[tex]2H_3PO_4 + Ca(OH)_2 \rightarrow Ca(H_2PO_4)_2 + 2H_2O[/tex]

Answer:

Two moles.

Explanation:

Sulphuric (sulfuric) acid [tex]\rm H_2SO_4[/tex] is a diprotic acid. When one mole of [tex]\rm H_2SO_4[/tex] molecules dissolve in water, two moles of [tex]\rm H^{+}[/tex] ions would be produced.

[tex]\rm H_2SO_4 \to 2\, H^{+} + {SO_4}^{2-}[/tex].

On the other hand, sodium hydroxide [tex]\rm NaOH[/tex] is a monoprotic base. When one mole of [tex]\rm NaOH[/tex] formula units dissolve in water, only one mole of hydroxide ions [tex]\rm OH^{-}[/tex] would be produced.

[tex]\rm NaOH \to Na^{+} + OH^{-}[/tex].

Note that [tex]\rm H^{+}[/tex] and [tex]\rm OH^{-}[/tex] react at a one-to-one ratio:

[tex]\rm H^{+} + OH^{-} \to H_2O[/tex].

As a result, it would take [tex]2\; \rm mol[/tex] of [tex]\rm OH^{-}[/tex] to react with the [tex]\rm 2\; mol[/tex] of [tex]\rm H^{+}[/tex] that was released when [tex]1\; \rm mol[/tex] of [tex]\rm H_2SO_4[/tex] is dissolved in water. Since one mole of [tex]\rm NaOH[/tex] formula units could produce only one mole of [tex]\rm OH^{-}[/tex], it would take [tex]\rm 2\; mol[/tex] of [tex]\rm NaOH[/tex] formula units to produce that [tex]2\; \rm mol[/tex] of [tex]\rm OH^{-}[/tex] for reacting with [tex]1\; \rm mol[/tex] of [tex]\rm H_2SO_4[/tex].

The right response is to raise the internal gas pressure. When a sealed glass jar is heated, the temperature of the gas within rises, causing the gas molecules to travel faster and collide with the jar's walls more often and with more force, increasing the gas's pressure.

Gas molecules are made up of atoms that are linked together. These interatomic connections function similarly to springs, connecting atoms of varying masses. This connection vibrates at a constant frequency known as the natural frequency. Atoms, molecules, and/or ions are all present in gases, liquids, and solids, but their behavior varies between the three phases. The graphic below depicts the tiny differences. A gas as seen via a microscope. A gas is a condition of stuff that does not have a set volume or form. Air, water vapor, and helium are examples of gases. A gas is a kind of stuff that does not have a defined volume or shape. To put it another way, a gas takes on the shape and volume of its container.

Here,

The correct answer is Increase the internal gas pressure as When a sealed glass jar is heated, the temperature of the gas within rises, forcing the gas molecules to travel faster and hit with the jar's walls more often and with more force, raising the gas's pressure.

To know more about gas molecule,

https://brainly.com/question/29848914

#SPJ1

Answer:

B

Explanation:

The molecular formula for pentyne is C5H8

Answer:2

Explanation:

Answer:

2

Explanation:

Answer:

Ancient CO₂ levels can be measured from

1) Air bubbles trapped in deep ancient ice cores (up to 800,000 years ago) or

2) Tree rings (up to 10,000 years ago)

Explanation:

The percentages of CO₂ concentration in the atmosphere from previous or ancient times are found by analyzing the CO₂ content in trapped air located in the deep ancient ice cores present in Antarctica and Greenland such as the EPICA Dome C cores

As the ice is drilled though, the air released from trapped bubbles are captured for analysis and the time frame for the captured bubbles can date back up to 800,000 years

Ancient CO₂ levels can also be measured from tree rings which provide ancient CO₂ levels up to 10,000 years