Desperate Please Hurry
What was the evidence that Earth was round before there were photos from space?

Answer:

600 volts

Explanation: just do 4.5x10^-5c lol i hope this helps if it dont im so sorry

Answer:

Copper isn't ferromagnetic,

Aluminum isn't ferromagnetic,

String has a ferromagnetic property

So in conclusion:

The answer is strings :)

Answer:

Energy production requires the setting up of a complete interconnected chain from generation of energy from the root source of the energy to the storage of the generated energy and the eventual utilization of the energy when required

Solar energy, indirectly, continues to be the main source of energy, however, the direct use of solar energy to power the systems we use in our everyday life, require the development of technologies, such as high efficiency solar cells, means of energy storage, and compatible efficient energy usage which are industrial areas that are seeing good progress but in which the current developed equipment are expensive to produce, and  due to their efficiency, are undergoing further research and development

Therefore, due to the continuous increasing improvement in solar technology which can observed, the use of the produced energy through solar is evolving, and therefore, will continue to play a continuously increasing but lower role compared to other sources of energy which have been developed to satisfactory level that can drive an industry, considering the financial investment involved

Explanation:

Answer:

he will be in profit

Explanation:

Himalayan region are high above the sea level so the gravity will be less there compared to the Terai region

Terai lies way below he Himalayan region so the pull of gravity will be more compared to Himalayan region

that's why he will be in profit but not loss

Answer:

The capacity of an RD bottle is 100cc and its mass is 45g. Find the mass of the bottle when it is filled with a liquid of density 600kg/[tex]m^{3}[/tex]

EXPLANATION:

100cc=100[tex]cm^{3}[/tex]

density of liquid=600Kg/  =0.6gm/

 so mass of 100cc liquid will be m=d×V=0.6×100=60gm

So mass of bottle filled with liquid will be bottle+liquid=45gm+60gm=105gm  

Answer is 105gm.

Answer:

Explanation:

The heat from the Sun gets to the surface of the Earth by radiation and not by convection because:

i. Radiation does not require material medium for its propagation: Since the space between the Sun and Earth is a vacuum ( i.e it is an empty space), then the only method for the heat from to Sun to get to the Earth is by radiation. This method does not require a material medium, while convection is a method that requires material medium for its propagation.

ii. Radiation occurs without heating the intervening medium: During the propagation of the heat from the Sun to the Earth, the space between the two heavenly bodies is not heated up. Some fraction of the heat after hitting the surface of the Earth get reflected back into the Earth's atmosphere. While in convection, the medium would have been heated up in the process.

Answer:

0.25p.a

Explanation:

force=15N area=60m²

so pressure =force/area =15N/60m²=0.25p.a

Answer:

The maximum velocity is 1.58 m/s.

Explanation:

A spring pendulum with stiffness k = 100N/m is attached to an object of mass m = 0.1kg, pulls the object out of the equilibrium position by a distance of 5cm, and then lets go of the hand for the oscillating object. Calculate the achievable vmax.

Spring constant, K = 100 N/m

mass, m = 0.1 kg

Amplitude, A = 5 cm = 0.05 m

Let the angular frequency is w.

[tex]w = \sqrt{K}{m}\\\\w = \sqrt{100}{0.1}\\\\w = 31.6 rad/s[/tex]

The maximum velocity is

[tex]v_{max} = w A\\\\v_{max} = 31.6\times 0.05 = 1.58 m/s[/tex]

Answer:

An interaction of one object with another object results in a force between the two objects. Thus, at-least two objects must interact for a force to come into play.

Answer:

The ball has a potential energy of 53 J.

Explanation:

Mechanical energy, E = Kinetic energy + Potential energy

E = K.E + P.E

65 = 12 + P.E

P.E = 65 – 12

P.E = 53 J

Therefore the potential energy of the ball is 53 J

Answer:

53

Explanation:

on e2021

Answer:

may be d)45°

Explanation:

Answer:

The induced current direction as viewed is clockwise

Explanation:

Lenz's Law states that the induced e. m. f. causes current to be driven in the loop of wire in such a way as to generate magnetic field that are oppose the magnetic flux change which is the source of the induced current

Therefore, as the magnet approaches the coil with the south pole,  the coil produces current equivalent to the upward movement of the south pole of a permanent magnet through it which according to Flemings Right Hand Rule is clockwise

Therefore;

The direction of the induced current in the loop (as viewed from above, looking down the magnet) is clockwise

Answer:

C. 29.21 m³

Explanation:

Given the following data;

To find the final volume, we would use Boyle's law;

Boyles states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.

Mathematically, Boyles law is given by;

PV = K

[tex] P_{1}V_{1} = P_{2}V_{2} [/tex]

Making V2 the subject of formula, we have;

[tex] V_{2} = \frac {P_{1}V_{1}}{P_{2}} [/tex]

Substituting the values into the formula, we have;

[tex] V_{2} = \frac {18.9 * 3.4}{2.2} [/tex]

[tex] V_{2} = \frac {64.26}{2.2} [/tex]

Final volume, V2 = 29.21 m³

Answer: The mass of copper liberated is 0.196 g.

Explanation:

The oxidation half-reaction of copper follows:

[tex]Cu\rightarrow Cu^{2+}+2e^-[/tex]

Calculating the theoretical mass deposited by using Faraday's law, which is:

[tex]m=\frac{M\times I\times t(s)}{n\times F}[/tex] ......(1)

where,

m = actual mass deposited = ? g

M = molar mass of metal = 63 g/mol

I = average current = 2 A

t = time period in seconds = 5 min = 300 s (Conversion factor: 1 min = 60 sec)

n = number of electrons exchanged = 2

F = Faraday's constant = 96500 C/mol

Putting values in equation 1, we get:

[tex]m=\frac{63 g/mol\times 2A\times 300s}{2\times 96500 C/mol}\\\\m=0.196g[/tex]

Hence, the mass of copper liberated is 0.196 g.

Explanation:

..upper side is glass ..

Answer:

Joule

Explanation:

the unit of work is Joule determined by the letter J.

Answer:

Explanation:

Joule is defined as the work done by a force of one newton causing a displacement of one meter. Sometimes, newton-metre (N-m) is also used for measuring work.

Answer:

Following are the response to the given question:

Explanation:

[tex]F_2=mgh_2+\frac{1}{2}mv_2^2+\frac{1}{2}mR^2(W)^2\\\\\therefore \\\\ \to WR=v_2\\\\E_2=Mgh_2+MV_2^2[/tex]

Answer:

Explanation:

Suppose you have 3 resistors each with a value of 3. If you placed them in parallel, would you get 3

1/3 + 1/3 + 1/3 = 1/r

The denominator doesn't change. So add the numerators.

(1 + 1 + 1)/3 = 3/3 = 1

So the question is faulty.

1 = 1/r

1*r = 1

r = 1/1

r = 1

Answer:

5/3 m/s or

6 km/h

Explanation:

really ? the average speed is just the straight connection in the graph from A to D.

that means the travel time was 40-10 seconds = 30 seconds.

and the distance traveled was 60-10 = 50 meters.

so, the average speed was

50 meters / 30 seconds

to bring this to standard m/s

5 m / 3 s = 5/3 m/s

or to standard km/h

an hour has 60 minutes or 120 30-seconds intervals

50 m/ 30 s × 120/120 = 6000 m / h = 6 km/h

Answer:

No, it's not there.

Explanation:

For a machine to be 100% efficient, it has to be with an output which is equal to its input. But machines have an out put less than an input, hence efficiency below 100%.

Answer:

Speed

Explanation:

The answer is speed. It doesn’t affect potential energy because it’s associated with position. But since kinetic energy is associated with motion speed affects it.

Encontramos que la distancia recorrida en los primeros 9 segundos es 288 metros.

Los datos dados son:

El cuerpo tiene una rapidez inicial de 5 m/s

El cuerpo tiene una aceleración de 6 m/s^2

Queremos calcular la distancia recorrida durante los primeros 9 segundos de movimiento.

Lamentablemente no contamos con los gráficos ni las tablas, así que se procede a obtener las ecuaciones de movimiento.

La aceleración será:

a(t) =  6m/s^2

Para la ecuación de la velocidad tenemos que integrar la ecuación de arriba, obteniendo:

v(t) = (6m/s^2)*t  + v0

Donde v0 es la rapidez inicial, que conocemos es igual a 5 m/s, así tenemos:

v(t) = (6m/s^2)*t  + 5m/s

Para la ecuación de la posición debemos integrar nuevamente, así obtendremos:

p(t) = (1/2)*(6m/s^2)*t^2  + (5m/s)*t + p0

Donde la p0 es la posición inicial, la cual podemos definir como p0 = 0m

p(t) = (3m/s^2)*t^2  + (5m/s)*t

Para encontrar la distancia recorrida en los primeros 9 segundos, simplemente debemos remplazar t por 9s en la ecuación de posición:

p(9s) =  (3m/s^2)*(9s)^2  + (5m/s)*9s = 288 m

Si querés aprender más sobre ecuaciones de movimiento, podés leer:

https://brainly.com/question/17123407

Explanation:

Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. An example of measurement is 15" by 25". ... The dimension, quantity, or capacity determined by measuring.

Measurement refers to the comparison of unknown physical quantity with a known quantity.

for eg. measurement of body while sewing clothes.......

Answer:

I HOPE IT WILL HELP YOU.

:D

Answer: a =0

Explanation:

Answer:

A)take motion and induce a current

Explanation:

i hope it will be helpful