There are $18$ possible integers $n$ that can be formed using the digits $6,7,8,9$ where each digit is used no more than once and the resulting integer is a multiple of $3$.
To determine if a number is divisible by $3$, we can add up its digits and see if that sum is divisible by $3$. Since $6+7+8+9 = 30$ is divisible by $3$, any integer formed by these four digits will be divisible by $3$ if and only if it contains at least one $9$.
There are four ways to choose the location of the $9$ in the integer. Once we've chosen the location for the $9$, we can fill the remaining three spots with the digits $6,7,$ and $8$ in any order. Since there are $3! = 6$ ways to order three distinct elements, there are $4\times 6 = 24$ ways to form an integer using the digits $6,7,8,9$ with no repetition that is divisible by $3$. However, we've counted the integer $9876$ twice, so there are actually only $18$ possible integers.
Learn more about Integers here: brainly.com/question/1768255
#SPJ11
The number of views of a video on the internet is shown in the table below as a function of the time since the video was posted
The linear regression equation that best fits the data set is y = 126x + 462.
How to explain the regressionTo find the linear regression equation, we can use the following steps:
Calculate the slope and the y-intercept..
In this case, we have the following values:
y₂ = 4,920
y₁ = 650
x₂= 20
x₁ = 2
Substituting these values into the formula, we get the following:
m = (4,920 - 650)/(20 - 2) = 2,270/18 = 126.11
The y-intercept is calculated using the following formula:
b = y - mx
In this case, we can use the point (2, 650) because it is the first point in the table. Substituting these values into the formula, we get the following:
b = 650 - 126.11(2) = 461.89
The linear regression equation that best fits the data set is y = 126.11x + 461.89. Round each parameter to the nearest whole number, we get y = 126x + 462.
Learn more about regression on
https://brainly.com/question/25987747
#SPJ1
The number of views of a video on the internet is shown in the table below as a function of the time since the video was posted (in hours).
Number of hours, x
Number of views, y
2
650
5
1,280
8 12
2,140
3,120
17
4,050
20
4,920
Find a linear regression equation, in the form y=ax+b, that best fits this data set. Round each parameter to the nearest whole number.
A basket of beads contains 8 red beans , 6 yellow beads, and 6 greens . A bead will be drawn from the basket and replaced 150 times. What is the reasonable prediction for the number of times a green bead is drawn
Step-by-step explanation:
green is 6 out of a total of ( 8+6+6 = 20 ) beads
so 6/20 ths of the time it should be a green bead
6/20 * 150 = 45 times should be green
Find the y-intercept of the line on the graph.
A bag of candy contains 3 blue candies, 4 green candies, and 6 red candies. If you draw two candies, one at a time and without replacement, what is the probability that you will draw a green candy and a blue candy?
The probability of drawing a green candy and a blue candy from the bag, one at a time and without replacement, is approximately 0.077 or 7.7%.
To calculate the probability of drawing a green candy and a blue candy from the bag without replacement, we need to determine the total number of candy combinations and the favorable combinations (green and blue candies).
The total number of candies in the bag is 3 blue + 4 green + 6 red = 13 candies.
When drawing the first candy, there are 13 candies to choose from. If a green candy is drawn, there are 4 green candies remaining out of the 12 candies left in the bag. Now, if a blue candy is drawn as the second candy, there are 3 blue candies remaining out of the 11 candies left in the bag.
The probability of drawing a green candy and a blue candy can be calculated as follows:
Probability = (Number of favorable combinations) / (Total number of candy combinations)
Number of favorable combinations = 4 (number of green candies) * 3 (number of blue candies) = 12
Total number of candy combinations = 13 (total candies) * 12 (remaining candies) = 156
Probability = 12 / 156 ≈ 0.077 or 7.7% (rounded to the nearest tenth)
Know more about probability here:
https://brainly.com/question/32004014
#SPJ11
Help please step by step
Tom does have enough fertilizer to cover the triangular area, as the triangular area is of 179.6 m², and he has 300 m² of fertilizer.
How to obtain the area of a triangle?We are given the three sides of the triangle, hence the first step in obtaining the area is obtaining the semi-perimeter, which is half the perimeter, hence:
s = (26 + 20 + 18)/2
s = 32 m.
The area of the triangle is then obtained as follows:
[tex]A = \sqrt{s(s - a)(s - b)(s - c)}[/tex]
[tex]A = \sqrt{32(32 - 26)(32 - 20)(32 - 18)}[/tex]
A = 179.6 m².
Hence Tom does have enough fertilizer to cover the triangular area, as the triangular area is of 179.6 m², and he has 300 m² of fertilizer.
More can be learned about the area of a triangle at brainly.com/question/21735282
#SPJ1
p(x) = 2x^3 -5x^2 + 7x - 3 find p(2) , p(0), p(-1), p(-2)
POLYNOMIAL CLASS 9 QUESTION
PLS, I NEED ANSWER FAST
The value of p(2) = 7, p(0) = -3 , p(-1) = -17 and p(-2) = -53 when polynomial is p(x) = 2x³ - 5x² + 7x - 3 with one variable.
Given that,
The polynomial is p(x) = 2x³ - 5x² + 7x - 3
We have to find the value of p(2), p(0), p(-1) and p(-2).
We know that,
Take polynomial,
p(x) = 2x³ - 5x² + 7x - 3
Now, to find p(2) take x = 2 in polynomial
By substituting,
p(2) = 2(2)³ - 5(2)² + 7(2) - 3
p(2) = 16 - 20 + 14 - 3
p(2) = 30 - 23
p(2) = 7
Now, to find p(0) take x = 0 in polynomial
p(0) = 2(0)³ - 5(0)² + 7(0) - 3 [multiplication]
p(0) = 0 - 0 + 0 - 3
p(0) = -3
Now, to find p(-1) take x = -1 in polynomial
p(-1) = 2(-1)³ - 5(-1)² + 7(-1) - 3
p(-1) = -2 - 5 - 7 - 3 [subtraction]
p(-1) = -17
Now, to find p(-2) take x = -2 in polynomial
p(-2) = 2(-2)³ - 5(-2)² + 7(-2) - 3
p(-2) = -16 - 20 - 14 - 3
p(-2) = -53
Therefore, The value of p(2) = 7, p(0) = -3 , p(-1) = -17 and p(-2) = -53.
To know more about polynomial visit:
https://brainly.com/question/21089564
https://brainly.com/question/27453285
Which of the following is an assumption for computing any type of independent sample t test?
a. Data in the population being sampled are normally distributed.
b. Data were obtained from a sample that was selected using a random sampling procedure.
c. The probabilities of each measured outcome in a study are independent.
d. all of the above
2. A researcher selects a sample of 16 women and asks them to rate how important a sense of humor is in someone they want a long-term relationship with. She records scores averaging 1.6±0.8 (M±SD) on a rating scale from -3 (not important at all) to +3 (very important). Assuming that an average score of 0 is the null hypothesis, test whether or not women find this trait important at a .05 level of significance.
a. Women found this trait to be important, and this result was significant, t(16) = 8.00, p < .05.
b. Women found this trait to be important, and this result was significant, t(15) = 8.00, p < .05.
c. Women did not find this trait to be important, p > .05.
d. There is not enough information to answer this question.
3. A researcher conducts two t tests. Test 1 is a one-tailed test with a smaller sample size at a .05 level of significance. Test 2 is a one-tailed test with a larger sample size at a .05 level of significance. What do you know about the critical values for each test?
a. Test 1 is associated with smaller critical values.
b. Test 2 is associated with smaller critical values.
c. Each test is associated with the same critical values.
d. It depends; there is not enough information to answer this question.
There are different ways to approach this question, but one possible method is to conduct a one-sample t-test using the formula t = (M - μ) / (s / sqrt(n)), where M is the sample mean, μ is the population mean (null hypothesis), s is the sample standard deviation, and n is the sample size. With the given information, the t-value is (1.6 - 0) / (0.8 / sqrt(16)) = 8.
The degrees of freedom is n - 1 = 15. Using a t-table or a calculator, the p-value for a one-tailed test with 15 degrees of freedom and a t-value of 8 is much smaller than .05 (e.g., < .0005). Therefore, we can reject the null hypothesis and conclude that women find a sense of humor to be important in a long-term relationship at a .05 level of significance. The correct answer is b.
Test 2 is associated with smaller critical values. The critical values for a t-test depend on the level of significance, the degrees of freedom, and whether the test is one-tailed or two-tailed. In general, a smaller level of significance or a larger sample size leads to smaller critical values (i.e., it becomes easier to reject the null hypothesis). Since Test 2 has a larger sample size than Test 1, it is more likely to detect a significant effect (i.e., have a smaller Type II error rate), and therefore requires smaller critical values to achieve a .05 level of significance. The correct answer is b.
To learn more about hypothesis : brainly.com/question/30899146
#SPJ11
A rectangle is 2 0 meter long and 2 3 meters wide. What is the area of the rectangle? Enter your answer in the box below.
Answer:
The answer is 460m²
Step-by-step explanation:
Area of rectangle =Length × Width
A=20×23
A=460m²
Answer:460
Step-by-step explanation: 20
x 23
_____
60
+400
exhibit 4the distribution of human pregnancy lengths can be described by a normal model with a mean of 39 weeks and a standard deviation of 2 weeks. what percentage of pregnancies last shorter than 38 weeks? select one:a.69.15%b.93.31%c.30.85%d.6.68%
The percentage of pregnancies last shorter than 38 weeks is (c) 30.85%.
We can use the normal distribution formula to calculate the percentage of pregnancies that last shorter than 38 weeks:
z = (x - μ) / σ
where z is the z-score, x is the value we are interested in (in this case, x = 38), μ is the mean (μ = 39), and σ is the standard deviation (σ = 2).
Substituting the values, we get:
z = (38 - 39) / 2 = -0.5
We can now use a standard normal distribution table or a calculator to find the percentage of values that fall below the z-score of -0.5. The area to the left of -0.5 is approximately 30.85%.
To know more about percentage,
https://brainly.com/question/29746632
#SPJ11
What happens if you try to use l' Hospital's Rule to find the limit? lim_x rightarrow infinity x/Squareroot x^2 + 3 You cannot apply l' Hospital's Rule because the function is not continuous. You cannot apply l'Hospital's Rule because the denominator equals zero for some value x = a. You cannot apply l'Hospital's Rule because the numerator equals zero for some value x = a You cannot apply l'Hospital's Rule because the function is not differentiable. Repeated applications of l'Hospital's Rule result in the original limit or the limit of the reciprocal of the function Evaluate the limit using another method.
The limit lim(x→∞) x/√(x^2 + 3) is 1, and there is no need to apply L'Hospital's Rule in this case.
When trying to use L'Hospital's Rule to find the limit lim(x→∞) x/√(x^2 + 3), it is important to note that L'Hospital's Rule can only be applied if the function is continuous and differentiable. In this case, the function is continuous and differentiable, but applying L'Hospital's Rule is not necessary as the limit can be evaluated using another method.
First, let's rewrite the given function by dividing both the numerator and the denominator by x:
lim(x→∞) (x/x) / (√(x^2 + 3)/x) = lim(x→∞) 1 / √(1 + 3/x^2)
As x approaches infinity, the term 3/x^2 approaches 0, so the limit becomes:
lim(x→∞) 1 / √(1 + 0) = 1 / √(1) = 1
Therefore, the limit lim(x→∞) x/√(x^2 + 3) is 1, and there is no need to apply L'Hospital's Rule in this case.
To know more about Limit visit:
https://brainly.com/question/12207539
#SPJ11
Find the sector area for the following
[tex]\textit{area of a sector of a circle}\\\\ A=\cfrac{\theta r^2}{2} ~~ \begin{cases} r=radius\\ \theta =\stackrel{radians}{angle}\\[-0.5em] \hrulefill\\ r=6\\ \theta = \frac{2\pi }{3} \end{cases}\implies A=\cfrac{~~ \frac{2\pi }{3 }6^2 ~~}{2}\implies A=12\pi \stackrel{ using~\pi =3.14 }{\implies A=37.68}[/tex]
Approximate the area under the function between a and b using a left-hand sum with the given number of intervals. f(x) = x² − x a = 0 b=3 3 Intervals
Find the limit of the following sequence or determine that the sequence diverges.
StartSet StartFraction left parenthesis 9 n plus 1 right parenthesis exclamation mark Over left parenthesis 9 n right parenthesis exclamation mark EndFraction EndSet(9n+1)!(9n)!
The term (9n+1) grows without bound as n approaches infinity, the limit does not exist. Therefore, the sequence diverges.
To find the limit of the given sequence, we can use the ratio test:
StartFraction
(9(n+1)+1)! / (9(n+1))!
Over
(9n+1)! / (9n)!
EndFraction
Simplifying the expression, we get:
StartFraction
(9n+10)(9n+9)(9n+8)...(9n+2)(9n+1)
Over
(9n+1)(9n)(9n-1)...(2)(1)
EndFraction
The terms cancel out and we are left with:
StartFraction
(9n+10)(9n+9)
Over
9n(9n+1)
EndFraction
Taking the limit as n approaches infinity, we get:
lim (n → ∞) StartFraction
(9n+10)(9n+9)
Over
9n(9n+1)
EndFraction
= lim (n → ∞) StartFraction
81n² + 81n + 90
Over
81n² + 9n
EndFraction
= lim (n → ∞) StartFraction
n² + n + 10 / n² + n / 9
EndFraction
As n approaches infinity, the higher order terms dominate, so we can ignore the constants and simplify the expression to:
lim (n → ∞) StartFraction
n² / n²
EndFraction
= 1
Since the limit exists and is finite, the sequence converges. Therefore, the limit of the sequence is 1.
To find the limit of the given sequence or determine if it diverges, consider the sequence:
a_n = (9n+1)! / (9n)!
We can rewrite the sequence using the properties of factorials:
a_n = [(9n+1)(9n)(9n-1)...(9n-(9n-1))] / (9n)!
a_n = (9n+1)
Now, we'll examine the limit as n approaches infinity:
lim (n -> ∞) a_n = lim (n -> ∞) (9n+1)
Since the term (9n+1) grows without bound as n approaches infinity, the limit does not exist. Therefore, the sequence diverges.
Learn more about limit at: brainly.com/question/12207539
#SPJ11
Use the interactive graph below to sketch a graph of y = 310g, (-X) - 9.
The sketch of the graph of the logarithm function is added s an attachment
Sketching the graph of the logarithm functionFrom the question, we have the following parameters that can be used in our computation:
y = 3log₂(-x) - 9
The above equations is an illustration of a logarithm function that has been transformed using the following
Reflected across the y-axisVertically stretched by a factor of 3Translated down by 9 unitsNext, we plot the graph using a graphing tool
The graph of the logarithm function is added as an attachment
Read more about logarithm equations at
https://brainly.com/question/28041634
#SPJ1
Which measure of central tendency is used to determine the average annual percent
increase?
A) Mode
B) Arithmetic mean
C) Median
D) Weighted mean
E) Geometric mean
The geometric mean is used to determine the average annual percent increase, as it accurately accounts for compounding growth over multiple periods. The correct option is E.
The measure of central tendency that is typically used to determine the average annual percent increase is the arithmetic mean. This measure takes the sum of all the values and divides it by the total number of values.
It is important to note that other measures, such as the geometric mean, can also be used in certain situations. But for most cases, the arithmetic mean is the go-to measure for determining the average annual percent increase.
To know more about geometric mean visit:-
https://brainly.com/question/29199001
#SPJ11
use quantifiers and logical connectives to express the factthat every linear polynomial (that is, polynomial of degree 1) with real coefficients and where the coefficient ofx is nonzero, has exactly one real root.
The expression states that for every linear polynomial p with real coefficients and a nonzero coefficient of x, there is exactly one real root r.
For all linear polynomials with real coefficients and a nonzero coefficient of x, there exists exactly one real root. This can be expressed using the universal quantifier "for all" and the existential quantifier "there exists", connected by the logical connective "and". Additionally, the statement "exactly one real root" can be expressed using the quantifier "there exists" and the logical connective "and".
Using quantifiers and logical connectives, we can express the given fact as follows:
∀p ∃!r ((isLinearPolynomial(p) ∧ hasRealCoefficients(p) ∧ coefficientOfX(p) ≠ 0) → hasRealRoot(p, r))
Explanation:
- ∀p: For every polynomial p
- ∃!r: There exists exactly one real root r
- isLinearPolynomial(p): p is a linear polynomial (degree 1)
- hasRealCoefficients(p): p has real coefficients
- coefficientOfX(p) ≠ 0: The coefficient of x in p is nonzero
- hasRealRoot(p, r): p has a real root r
Learn more about coefficients at: brainly.com/question/1594145
#SPJ11
WORTH 20 POINTS
PLS HELP ME AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA
A ratio is a relationship in which for every x units of one quantity there are y units of another quantity. Ratios are considered to be equivalent if they express the same x/y. A ratio compares 2 like or unlike quantities by division. Ratios can be shown visually using a graph or a ratio table.
can you help me with this math
What multiplies to -25 and adds to 0?
Answer:
-5 and 5
Step-by-step explanation:
[tex]-5*5=-25\\\\-5+5=0[/tex]
your ceiling is 250 centimeters high, you want the tree to have 35 centimeters of space with the ceiling. how tall must the tree be? (in centimeters)
To calculate the height of the tree that would leave a 35 cm space from a 250 cm tall ceiling, subtract the desired space from the total height. Hence, the tree should be 215 centimeters tall.
Explanation:The calculation involves understanding and using the concepts of height and ceiling space. When you want a tree to leave a certain amount of space from the ceiling, you have to subtract that desired space from the total height of the room. So, if your ceiling is 250 centimeters high and you desire a space of 35 centimeters to be left, the tree's height should be calculated as follows:
Subtract the desired space from the total height: 250 cm - 35 cm The result would then give the height of the tree: 215 cm
So, in this scenario, the tree must be 215 centimeters tall to fit perfectly under your ceiling with 35 centimeters of space left.
Learn more about Tree and Ceiling Heights here:https://brainly.com/question/34088742
#SPJ11
Wyatt’s math teacher wrote the following data set on the board.
10, 2.8, 6.5, 21.6, 8.2, 9.3, 4, 2.8
What is the range of the data?
Answer:
18.8
Step-by-step explanation:
To find the range of a data set, you subtract the smallest value from the largest value.
In this case, the smallest value is 2.8 and the largest value is 21.6.
Range = largest value - smallest value = 21.6 - 2.8 = 18.8
Therefore, the range of the data set is 18.8.
helpppppppppp pleaseeeeee
The angles in the trapezoid are as follows:
m∠D = 21°
m∠A = 159°
m∠B = 159°
How to find the angle of an isosceles trapezoid?Isosceles trapezoid is a trapezoid in which the top and bottom sides are parallel, while the remaining two non-parallel sides have the same length.
Adjacent angles of the isosceles trapezoid are congruent.
Hence,
m∠D = 21 degrees
Any lower base angles is supplementary to any upper base angles.
m∠A = 180 - 21 = 159 degrees
m∠B = 180 - 21 = 159 degrees
learn more on isosceles trapezoid here: https://brainly.com/question/2516570
#SPJ1
describe the pattern 9;16;25;36;49 by words and algebraically
Given the pattern:
9, 16, 25, 36, 49
In words, this pattern represents:
the sequence of perfect squares of consecutive integers starting from 3.The numbers are obtained by squaring the integers 3, 4, 5, 6, and 7, respectively.
Algebraically, we can represent the pattern using the formula:
t(n) = (n + 2)², where t(n) is the nth termA data flow diagram (DFD) does not provide any information about process timing. T/F
Answer:
Step-by-step explanation:
True.
A Data Flow Diagram (DFD) is a graphical representation of a system or a process that shows how data flows through different components of the system. It provides a visual representation of the system's inputs, processes, and outputs.
While a DFD can provide information on the data that flows between the different components of a system, it does not provide any information about the timing or sequence of those processes. A DFD is a static diagram that only depicts the flow of data in a system and does not provide any indication of when or how frequently processes occur
Find the value of sides RS
Answer:
RS = 15 units
Step-by-step explanation:
Given:
RT = 9
TS = 12
To find: Length of RS
Proof:
In right triangle RTS,
[tex]RT^{2} + TS^{2} = RS^{2}[/tex]
[tex]9^{2} + 12^{2} = RS^{2}[/tex]
[tex]81 + 144 = RS^{2}[/tex]
[tex]225 = RS^{2}[/tex]
[tex]\sqrt{225} = RS[/tex]
15 = RS
∴ The length of RS is 15 units.
what do we have to add totge expression 4x^2+20x to complete the square?
We should add 25 to make it a perfect square.
Given is an expression 4x²+20x, we need to add a term to make it a perfect square,
So,
4x²+20x
= (2x)² + 2 × 2 × 5 × x
Add and subtract 25.
= (2x)² + 2 × 2 × 5 × x + 25 - 25
= (2x)² + 2 × 2 × 5 × x + 5² - 25
= (2x+5)² - 25
Hence we should add 25 to make it a perfect square.
Learn more about perfect square click;
https://brainly.com/question/13521012
#SPJ1
Matthew signed up for a streaming music service that costs $14 per month. The service allows Matthew to listen to unlimited music, but if he wants to download songs for offline listening, the service charges $1.50 per song. How much total money would Matthew have to pay in a month in which he downloaded 15 songs? How much would he have to pay if he downloaded s songs?
the lifetime of a certain type of battery can be approximated by a normal distribution. the list gives the number of hours of battery life of 10 batteries selected at random. find the mean and standard deviation of the data set. then sketch a normal curve to represent the distribution. 24, 24, 32, 14, 22, 34, 20, 26, 17, 29
Answer: mean= 24.2 and the standard deviation is 6.0 :)
Step-by-step explanation: this is because when you solve for the equation the result for the standard deviation is 6.3 but if you round the number, it becomes 6.0, being the standard deviation.
If x = 5, then which equation is NOT true?
-2x ≤ 12
x - 2>7
2x < 12
x-7<2
Answer:
x - 2 > 7
Step-by-step explanation:
Substitute the value 5 for x.
x = 5
-2x ≤ 12
-2(5) ≤ 12
-10 ≤ 12 True
-10 is less than or equal to 12
x - 2 > 7
5 - 2 > 7
3 > 7 Not true
3 is greater than 7
2x < 12
2(5) < 12
10 < 12 True
10 is less than 12
x - 7 < 2
5 - 7 < 2
-2 < 2 True
-2 is less than 2
which inference method can be used to test for a difference between the average iq scores of identical twins raised by birth parents and in a foster home? circle the correct choice.
The appropriate inference method to test for a difference between the average IQ scores of identical twins raised by birth parents and in a foster home is paired t-test.
A paired t-test is used when comparing two sets of observations that are paired or matched in some way, such as in the case of identical twins. In this scenario, the twins are matched based on their genetic makeup, and their IQ scores are compared based on their different upbringing environments (birth parents vs. foster home). The paired t-test allows us to analyze the difference between the paired observations (IQ scores) and determine if there is a statistically significant difference between the two groups.
Know more about paired t-test here:
https://brainly.com/question/29978671
#SPJ11
