fernando competed in an 80 mile bike race. after 0.5 hour, he had ridden 9 miles. after 1 hour of riding, fernando had biked 18 miles. assuming he was traveling at a constant speed, how far will fernando have traveled after 3.5 hours?

Answers

Answer 1

Fernando will have traveled 63 miles after 3.5 hours.

To find the distance Fernando will have traveled after 3.5 hours, we can determine his average speed and then calculate the total distance covered.

We are given that after 0.5 hours, Fernando had ridden 9 miles, and after 1 hour, he had ridden 18 miles. By comparing these two data points, we can see that Fernando is traveling at a constant speed of 18 miles per hour.

To calculate the distance traveled after 3.5 hours, we can multiply the speed (18 miles per hour) by the time (3.5 hours):Distance = Speed × Time = 18 miles/hour × 3.5 hours = 63 miles.

Therefore, Fernando will have traveled 63 miles after 3.5 hours.

It is important to note that this calculation assumes a constant speed throughout the entire race. If the speed varied during the race, the result may be different. However, based on the given information of constant speed, we can conclude that Fernando will have traveled 63 miles after 3.5 hours.

Learn more about average speed here:

brainly.com/question/13318003

#SPJ11


Related Questions

Solve for x and graph the solution.
(x–2)(x–4)≥0
Plot the endpoints. Select an endpoint to change it from closed to open. Select the middle of a segment, ray, or line to delete it.

Answers

The solution of this inequality are x ≤ 2 and x ≥ 4 which is shown in the graph below.

What is an inequality?

In Mathematics and Geometry, an inequality is a relation that compares two (2) or more numerical data, number, and variables in an algebraic equation based on any of the inequality symbols;

Greater than (>).Less than (<).Greater than or equal to (≥).Less than or equal to (≤).

In this scenario and exercise, we would solve and graph the given inequalities for x in parts as follows;

(x – 2)(x – 4) ≥ 0

(x – 2) ≥ 0

(x – 2) + 2 ≥ 0 + 2

x - 2 ≥ 0

x ≤ 2 (solid dot with an arrow that points to the left on a number line).

(x – 4) ≥ 0

(x – 4) + 4 ≥ 0 + 4

x - 4 ≥ 0

x ≥ 4 (solid dot with an arrow that points to the right on a number line).

Read more on inequality here: brainly.com/question/30665021

#SPJ1

Consider the following cases examining the benefits of making a down payment. Case 1: You want to buy a car. Suppose you borrow $10,000 for two years at an APR of 4%. Case 2: You want to buy a car. Suppose you borrow $10,000 for two years at an APR of 4% and make a down payment of $3,000. This means you borrow only $7,000. What are the advantages of making a down payment? (Select all that apply.) reduction in the total interest paid over the life of the loan Increase in the total interest paid over the life of the loan increase in term of the loan reduction in term of the loan increase in monthly payment reduction in monthly payment

Answers

When buying a car, making a down payment can have various benefits such as reduction in the total interest paid over the life of the loan, reduction in the term of the loan, and reduction in monthly payment.

In the given cases, the advantages of making a down payment of $3,000 on a $10,000 car loan at an APR of 4% for two years are explained.

In Case 1, the borrower borrows $10,000 at an APR of 4% for two years. Therefore, the total interest paid over the life of the loan is (10,000 x 0.04 x 2) = $800.

The monthly payment for this loan can be calculated using the following formula:

Monthly payment = [tex](P x r) / (1 - (1 + r) ^ -n)[/tex]where,P = principal amountr = interest raten = number of payments per year.

The monthly payment is calculated as [tex]($10,000 x 0.04 / 12) / (1 - (1 + 0.04 / 12) ^ -24) = $439.89.[/tex]

In Case 2, the borrower borrows $7,000 ($10,000 - $3,000) at an APR of 4% for two years. Therefore, the total interest paid over the life of the loan is (7,000 x 0.04 x 2) = $560. The monthly payment for this loan can be calculated using the same formula:

Monthly payment = [tex](P x r) / (1 - (1 + r) ^ -n).[/tex]

The monthly payment is calculated as [tex]($7,000 x 0.04 / 12) / (1 - (1 + 0.04 / 12) ^ -24) = $307.92.[/tex]

From the above calculation, it is evident that making a down payment of $3,000 reduces the total interest paid over the life of the loan from $800 to $560, which is a reduction of $240. It is because the borrower borrows a lesser amount, and hence, he/she has to pay lesser interest on the loan. Also, making a down payment reduces the term of the loan.

The borrower has to pay back the loan in 24 months in both cases, but the amount to be repaid is less in Case 2 (i.e., $7,000 instead of $10,000). Therefore, the borrower can clear the loan sooner in Case 2 than in Case 1. Furthermore, making a down payment also reduces the monthly payment.

In Case 1, the monthly payment is $439.89, whereas, in Case 2, the monthly payment is $307.92. Hence, making a down payment reduces the monthly burden on the borrower, and he/she can manage his/her finances better.

Thus, we can conclude that making a down payment when buying a car can be beneficial for the borrower as it can reduce the total interest paid over the life of the loan, reduce the term of the loan, and reduce the monthly payment.

To know more about interest :

brainly.com/question/30393144

#SPJ11

Explain how your samples may be bias and how would you modify
your sample or data collection technique to avoid any potential
biases.

Answers

These Sample-Biases can arise from various sources, such as the demographics of the authors, the topics covered, or the societal biases reflected in the text.

To modify the sample or data collection technique to avoid potential biases, several approaches can be employed :

Some approaches are explained below :

(i) Diverse Training Data: Expanding the range of training data by including diverse sources, perspectives, and demographics can help mitigate biases.

(ii) Preprocessing and Filtering: Applying preprocessing techniques to identify and remove biased or unrepresentative content can help reduce biases in the training data.

(iii) Multiple Perspectives: Ensuring that training data includes a variety of viewpoints and perspectives can help mitigate bias.

(iv) User Feedback and Iterative Improvement: Actively soliciting user feedback on biased responses can help identify and address biases in real-time.

(v) Regular Auditing and Evaluation: Conducting regular audits and evaluations of the model's performance for bias can help identify and rectify any biases that may emerge over time.

Learn more about Bias here

https://brainly.com/question/32843771

#SPJ4

A marginal abatement cost that shows a factory's
pollution is represented by MAC= 360 - 5E with a tax per unit equal
to 20$. How much will the factory reduce its emissions? SHOW FULL
CALCULATIONS

Answers

The factory will reduce its emissions by 155 units.

Given, the marginal abatement cost that shows a factory's pollution is represented by MAC = 360 - 5E and a tax per unit equal to $20.

To determine the reduction in emissions from the factory, we need to find the equilibrium point after imposing the tax, which is given as;

MAC + tax = Marginal private cost (MPC)

The MPC curve is the same as the MAC curve. We just add the tax to it.

MPC = MAC + tax

MPC = 360 - 5E + 20

MPC = 380 - 5E

At equilibrium, MPC = Marginal social cost (MSC)

MSC = 400 - 10E

For finding the reduction in emissions, we need to equate both the equations:

MSC = MPC

400 - 10E

= 380 - 5E10E - 5E

= 400 - 3805E

= 205E

= 41 units

Now that we have E, we can find the amount of emissions reduced by using the original equation.

MAC = 360 - 5E = 360 - 5(41) = 155

Therefore, the factory will reduce its emissions by 155 units.

To know more about emissions visit:

https://brainly.com/question/15966615

#SPJ11

Simplify (9 + 3i) - (4 + 5i)

Answers

Answer:

5 - 2i

Step-by-step explanation:

(9 +3i) - (4 + 5i)

9 + 3i - 4 - 5i

9 - 4 + 3i - 5i

5 - 2i

Answer:i+ 2.5

Step-by-step explanation:

Let y = 5,√√x. Find the change in y, Ay when x = 1 and Ax 0.1 = Find the differential dy when x = 1 and da = 0.1

Answers

The values of the given functions are: [tex]Ay = 0.70711, dy = 0.25[/tex]

We need to find the change in y, Ay when x = 1 and Ax 0.1 =

Find the differential dy when x = 1 and da = 0.1

Formula Used:

To find the differential, we use the formula:

[tex]dy = f'(x) * da[/tex]

Where dx is the change in x.f'(x) is the derivative of f(x).da is the differential of x.

[tex]Ay = √√1 \\= √(1/2) \\= 0.70711[/tex]

Now, we are given, [tex]x = 1 and dx = 0.1[/tex]

Let us first find the derivative of y using the chain rule:

[tex]dy/dx = (1/2) * 5 * x^(-3/4) * (x^(-1/4))^(-1)\\dy/dx = (1/2) * 5 * x^(-3/4) * x^(1/4)\\dy/dx = (5/2) * x^(-1/2)[/tex]

Substituting [tex]x = 1,[/tex]

[tex]dy/dx = (5/2) * (1)^(-1/2)\\dy/dx = 5/2 = 2.5\\[/tex]

Now, we need to find dy when [tex]x = 1 and dx = 0.1,[/tex]

[tex]dy = f'(x) * dxdy \\= (5/2) * (0.1) \\= 0.25[/tex]

Hence, [tex]Ay = 0.70711, dy = 0.25[/tex]

Know more about functions here:

https://brainly.com/question/11624077

#SPJ11

22 If we group the first two farms and the last two terms as follows (xy+5y) + (2x + 10) Group 1 what do you notice about each group? Group 2 the Suplay y 12, +alls (1) 23 Factor these values out of each group and then write down the equivalent algebraic expression. 24 What is the common factor in the two terms? 25 Use the distributive property to factor out this common factor and then express the polynomial as a product of two binomials​

Answers

22. In the given expression, we grouped the terms into two groups based on their common factors. Group 1 consisted of terms with a common factor of y, and Group 2 consisted of terms with a common factor of 2.

22. Factoring out the common factors from each group, we obtained (x + 5)(y + 2) as the equivalent algebraic expression.

23. The common factor in the two terms was (x + 5),

24.  by using the distributive property, we factored out this common factor to express the polynomial as a product of two binomials

22. Let's break down the problem step by step:

The given expression is (xy + 5y) + (2x + 10).

Group 1: xy + 5y

Group 2: 2x + 10

Notice that in Group 1, both terms have a common factor of y, and in Group 2, both terms have a common factor of 2.

23. Factoring out the common factors from each group gives us:

Group 1: y(x + 5)

Group 2: 2(x + 5)

24. The common factor in the two terms is (x + 5).

25. Using the distributive property, we can factor out the common factor from the expression:

(x + 5)(y + 2)

Therefore, the polynomial can be expressed as the product of two binomials: (x + 5)(y + 2).

For more such question on common factor . visit :

https://brainly.com/question/219464

#SPJ8

The Planes Πα And ∏Β Have Equations ∏Α:6x−3y+Z=5∏Β:−X+32y+5z=5 Calculate The Angle Between The

Answers

The angle between the planes Πα and ∏Β is determined using the formula cosθ = -97 / (√48300). The exact value of θ can be obtained by taking the inverse cosine (arccos) of -97 / (√48300).

To calculate the angle between two planes, we can use the formula:

cosθ = (a1a2 + b1b2 + c1c2) / (√(a1^2 + b1²+ c1²) * √(a2² + b2²+ c2²))

where (a1, b1, c1) and (a2, b2, c2) are the normal vectors of the two planes.

For plane Πα: 6x - 3y + z = 5, the normal vector is (6, -3, 1).

For plane ∏Β: -x + 32y + 5z = 5, the normal vector is (-1, 32, 5).

Substituting these values into the formula, we get:

cosθ = ((6 * -1) + (-3 * 32) + (1 * 5)) / (√(6² + (-3)²+ 1^2) * √((-1)²+ 32²+ 5²))

Simplifying further:

cosθ = (-6 - 96 + 5) / (√36 + 9 + 1) * (√1 + 1024 + 25)

cosθ = -97 / (√46 * √1050)

cosθ = -97 / (√48300)

To find the angle θ, we can take the inverse cosine (arccos) of cosθ:

θ = arccos(-97 / (√48300))

Using a calculator or math library, we can find the value of θ.

Learn more about angle

brainly.com/question/30147425

#SPJ11

Test the series below for convergence using the Root Test. ∑ n=1
[infinity]
​ ( 6n+5
4n
​ ) n
The limit of the root test simplifies to lim n→[infinity]
​ ∣f(n)∣ where f(n)= The limit is: (enter oo for infinity if needed) Based on this, the series Diverges Converges

Answers

According to the question based on the Root Test, the series diverges as the limit evaluates to infinity [tex](oo)[/tex] since [tex]\( \frac{3}{2} \)[/tex] raised to any power [tex]\( n \) where \( n \)[/tex] approaches infinity will result in an infinitely large value.

To test the series [tex]\( \sum_{n=1}^{\infty} \left( \frac{6n+5}{4n} \right)^n \)[/tex] for convergence using the Root Test, we evaluate the limit:

[tex]\[ \lim_{n \to \infty} \left| \frac{6n+5}{4n} \right|^n \][/tex]

Simplifying the expression inside the absolute value:

[tex]\[ \lim_{n \to \infty} \left( \frac{6n+5}{4n} \right)^n = \left( \lim_{n \to \infty} \frac{6n+5}{4n} \right)^n \][/tex]

Now, let's evaluate the limit inside the parentheses:

[tex]\[ \lim_{n \to \infty} \frac{6n+5}{4n} = \frac{6}{4} = \frac{3}{2} \][/tex]

Therefore, the limit simplifies to:

[tex]\[ \lim_{n \to \infty} \left( \frac{3}{2} \right)^n \][/tex]

If the limit is less than 1, the series converges. If the limit is greater than 1 or equal to infinity, the series diverges.

In this case, the limit evaluates to infinity [tex](oo)[/tex] since [tex]\( \frac{3}{2} \)[/tex] raised to any power [tex]\( n \) where \( n \)[/tex] approaches infinity will result in an infinitely large value.

Therefore, based on the Root Test, the series diverges.

To know more about infinity visit-

brainly.com/question/32622141

#SPJ11

First, compute the gradient of the following function. Then evaluate it at the given point P. -x²-3y²; P(4,-1) F(x,y)= e The gradient is The gradient at P(4, -1) is

Answers

Given that: Function,

F(x,y) = e^(x + y)

The gradient of the given function is:

∇F(x,y) = <∂F/∂x, ∂F/∂y>

According to the problem, we need to find the gradient of the following function.

Therefore we have to take the partial derivative of F(x,y) with respect to x and y.-x²-3y²; P(4,-1)Taking the partial derivative with respect to x, we get:∂F/∂x = -2x.

Taking the partial derivative with respect to y, we get:∂F/∂y = -6yTherefore the gradient is, ∇F(x,y) = <-2x, -6y>Gradient at P(4, -1): Substituting x = 4 and y = -1 in the above gradient, we get∇F(4, -1) = <-2(4), -6(-1)>= <-8, 6>The gradient at P(4, -1) is <-8, 6>.

To know more about Function visit :

https://brainly.com/question/30721594

#SPJ11

Which graph best represents this relationship?

distance = 20 × time

Answers

The graph that best represents this relationship is a straight line passing through the origin with a slope of 20.

The relationship given is distance = 20 × time. In other words, distance is directly proportional to time.

Therefore, the graph that best represents this relationship is a straight line passing through the origin (0, 0).

The slope of the line represents the constant of proportionality, which is 20 in this case. Thus, the graph should have a slope of 20.
A direct proportionality relationship is one in which one variable is directly proportional to the other.

The formula is y = kx, where k is the constant of proportionality. In this case, the relationship is distance = 20 × time, which can be rewritten as y = 20x.

This is a linear function with a slope of 20. When graphed, the line passes through the origin (0, 0) and has a positive slope of 20. This means that for every unit increase in time, the distance increases by 20 units.

Conversely, for every unit decrease in time, the distance decreases by 20 units.

for such more questions on graph

https://brainly.com/question/19040584

#SPJ8

a well designed application form will do which of the following ?
decrease the likelihood that applicants will embellish information
Reveal applicant's relegion
provide less utility than resumes
screen out applicants who do not meet the minimum specifications for a job
allow overqualified applicants to be tested

Answers

A well-designed application form will screen out applicants who do not meet the minimum specifications for a job.

This is because the form will include questions that are specific to the job requirements, and only those applicants who meet the minimum specifications will be able to proceed to the next stage of the hiring process.

Additionally, a well-designed application form will decrease the likelihood that applicants will embellish information by asking for specific, factual information that can be easily verified. This ensures that the information provided by the applicants is accurate and truthful.

Revealing an applicant's religion is not a relevant or legal question in an application form.

Furthermore, resumes provide more utility than application forms as they can provide a detailed overview of the applicant's education, work experience, skills, and accomplishments.

Lastly, an application form is unlikely to allow overqualified applicants to be tested, as the form is designed to screen out applicants who do not meet the minimum specifications for the job.

Thus, a well-designed application form will screen out applicants who do not meet the minimum specifications for a job.

Learn more about job application form here:

https://brainly.com/question/20309409

#SPJ11

Rewrite the following as a sum or difference of logs: log(x²-4) log(x²) log (4) log(x+2) 8 log (x-2) o log g(x-2) + log g(x+2) o log g(x-2) - log g(x+2) o (log(x-2)) (log(x+2))

Answers

Therefore, the expressions rewritten as a sum or difference of logarithms are:

1. log(x²-4) = log[(x-2)(x+2)]

5. 8log(x-2) = log[(x-2)^8]

7. log[g(x-2)] - log[g(x+2)] = log[g(x-2)/g(x+2)]

Specifically, we can use the logarithmic identities for multiplication, division, and exponentiation.

1. log(x²-4)

We can rewrite this expression as the difference of two logarithms:

log(x²-4) = log[(x-2)(x+2)]

2. log(x²)

There is no need to rewrite this expression as it is already a logarithm.

3. log(4)

There is no need to rewrite this expression as it is already a logarithm.

4. log(x+2)

There is no need to rewrite this expression as it is already a logarithm.

5. 8log(x-2)

We can rewrite this expression as the sum of logarithms:

8log(x-2) = log[(x-2)^8]

6. log[g(x-2)] + log[g(x+2)]

This expression is already written as a sum of logarithms.

7. log[g(x-2)] - log[g(x+2)]

We can rewrite this expression as the difference of logarithms:

log[g(x-2)] - log[g(x+2)] = log[g(x-2)/g(x+2)]

8. (log(x-2))(log(x+2))

This expression is already written as a product of logarithms.

Therefore, the expressions rewritten as a sum or difference of logarithms are:

1. log(x²-4) = log[(x-2)(x+2)]

5. 8log(x-2) = log[(x-2)^8]

7. log[g(x-2)] - log[g(x+2)] = log[g(x-2)/g(x+2)]

The expressions that are already written as a sum or difference of logarithms are:

6. log[g(x-2)] + log[g(x+2)]

8. (log(x-2))(log(x+2))

Learn more about logarithms here:

https://brainly.com/question/30226560

#SPJ11

Solve the initial value problem below using the method of Laplace transforms. w′′ +4w=8t^2 +4,w(0)=2, w′ (0)=−20 Click here to view the table of Laplace transforms. Click here to view the table of properties of Laplace transforms. w(t)=

Answers

The solution of the initial value problem is [tex]w(t) = 2 - 8t + 8t^{2} + 2e^{-2t}[/tex].[/tex]

Using the method of Laplace transforms, we can solve the given initial value problem as follows:

Given:

w′′ +4w=8t²+4,

w(0)=2,

w′(0)=−20.

Laplace transform of the given equation will be:

L{w′′} + 4 L{w} = 8 L{t²} + 4

Using property 3 from the Table of Properties of Laplace Transforms and Table of Laplace Transforms, we get:

s²L{w} - s w(0) - w′(0) + 4

L{w} = 8 * 2! / s³ + 4 / s

Applying the initial conditions w(0)=2 and w′(0)=−20 in the above equation, we get:

s²L{w} - 2s + 20 + 4

L{w} = 16 / s³ + 4 / s

Rearranging the above equation, we get:

L{w} = [16 / s³ + 4 / s + 2s - 20] / [s² + 4]

Using partial fraction method, we can write:

L{w} = 2/s - 8/s² + 16/s³ + 4/(s+2)

Taking the inverse Laplace transform of the above equation, we get:

[tex]w(t) = 2 - 8t + 16t^{2}/2 + 4e^{-2t}\\w(t) = 2 - 8t + 8t^{2} + 2e^{-2t}[/tex]

Know more about the Laplace transforms

https://brainly.com/question/29583725

#SPJ11

Let f be the function given by f(x) = 2x² - 4x² + 1. a) Find an equation of the line tangent to the graph at (2,17).

Answers

The equation of the line tangent to the graph of f(x) = 2x² - 4x + 1 at the point (2, 17) is: y = 4x + 9.

How to Find the Equation of a Line Tangent to a Graph?

To find the equation of the line tangent to the graph of the function f(x) = 2x² - 4x + 1 at the point (2, 17), we need to determine the slope of the tangent line at that point.

The slope of the tangent line can be found by taking the derivative of the function f(x) and evaluating it at x = 2.

First, let's find the derivative of f(x):

f'(x) = d/dx(2x² - 4x + 1)

= 4x - 4

Now, we can evaluate the derivative at x = 2:

f'(2) = 4(2) - 4

= 8 - 4

= 4

So, the slope of the tangent line at the point (2, 17) is 4.

Next, we can use the point-slope form of a linear equation to find the equation of the tangent line. The point-slope form is given by:

y - y₁ = m(x - x₁)

where (x₁, y₁) is the given point and m is the slope.

Substituting the values into the equation:

y - 17 = 4(x - 2)

Now, we can simplify the equation:

y - 17 = 4x - 8

Finally, rearrange the equation to obtain the equation of the line in slope-intercept form:

y = 4x - 8 + 17

y = 4x + 9

Learn more about Equation of a Line Tangent to a Graph on:

https://brainly.com/question/32769255

#SPJ4

Mx(t) is the moment-generating function for the distribution of the random variable X. Find the mean and variance of the distribution. My(t) = (1-2t)-3 μ= 0²=

Answers

The mean (μ) of the distribution is 6, and the variance (σ^2) is 12.

To calculate the mean and variance of the distribution, we can use the moment-generating function (MGF) My(t) of the random variable Y.

Provided My(t) = (1 - 2t)^(-3), we can calculate the mean (μ) and variance (σ^2) using the following formulas:

μ = M'(0)

σ^2 = M''(0) - [M'(0)]^2

First, let's obtain the first derivative of My(t) with respect to t:

M'(t) = d/dt[(1 - 2t)^(-3)]

      = -3(1 - 2t)^(-4) * (-2)

      = 6(1 - 2t)^(-4)

Now, substitute t = 0 into M'(t) to obtain the mean (μ):

μ = M'(0)

  = 6(1 - 2(0))^(-4)

  = 6

So, the mean of the distribution is μ = 6.

Next, let's obtain the second derivative of My(t) with respect to t:

M''(t) = d^2/dt^2[(1 - 2t)^(-3)]

       = 6(-4)(1 - 2t)^(-5) * (-2)

       = 48(1 - 2t)^(-5)

Now, substitute t = 0 into M''(t) and M'(0) to obtain the variance (σ^2):

σ^2 = M''(0) - [M'(0)]^2

    = 48(1 - 2(0))^(-5) - [6]^2

    = 48 - 36

    = 12

So, the variance of the distribution is σ^2 = 12.

To know more about variance refer here:

https://brainly.com/question/13708253#

#SPJ11

please help, thank you!
The point (7, pi/3) can also be represented by which of the
following polar coordinates?
The point 7. can also be represented by which of the following polar coordinates? Select all that apply. A. 8. C. D. (7.²) 7 4x WH CARLO

Answers

The possible polar coordinates of the point (7, π/3) are:(7.51, 0.615) or (7.51, π/3).

The polar coordinates of the given point are to be determined.Suppose, the polar coordinates of the given point are given by (r, θ).

Then, we have:r = √(x² + y²)θ = tan⁻¹(y/x)

Here, the given point is (7, π/3).

x = 7,y = 7,tan(π/3) = (7 * √3)/3

r = √(7² + [(7 * √3)/3]²)≈ 7.51θ = tan⁻¹([(7 * √3)/3])/7)≈ 0.615

The polar coordinates of the given point are (7.51, 0.615) or (7.51, π/3).

To know more about polar coordinates visit:

https://brainly.com/question/31904915

#SPJ11

A preventive maintenance program that follows the philosophy of optimum parts replacement will have: a. No failures b. Minimal parts replacement costs c. Frequent maintenance operations d. Some failures

Answers

A preventive maintenance program that follows the philosophy of optimum parts replacement will have minimal parts replacement costs.

Preventive maintenance is conducted on equipment and machines to prevent unexpected breakdowns and failures.

A preventive maintenance program follows the philosophy of optimum parts replacement; it seeks to minimize the number of parts that need to be replaced to ensure optimal performance, minimal downtime, and minimal costs.

The answer to this question is that a preventive maintenance program that follows the philosophy of optimum parts replacement will have minimal parts replacement costs.

To know more about preventive maintenance, please click here:

https://brainly.com/question/1078765

#SPJ11

A population of values has a normal distribution with
μ=77.6μ=77.6 and σ=19.4σ=19.4. You intend to draw a random sample
of size n=215n=215.
What is the mean of the distribution of sample means?

Answers

The population of values has a normal distribution with mean = 77.6 and standard deviation = 19.4.

The sample size = 215. We are to determine the mean of the distribution of sample means. We know that the formula for the mean of the distribution of sample means is given by:

μX = μ=77.6μX = μ=77.6 (1)and the formula for standard error (σX) of the distribution of sample means is given by: σX = σnσX = σn (2)

Substituting the given values of μ and σ in equations (1) and (2) respectively, we obtain:

μX = μ=77.6μX = μ=77.6σX = σn=19.4/√215σX = σn=19.4/√215μX = 77.6μX = 77.6σX = 1.322σX = 1.322

Therefore, the mean of the distribution of sample means is 77.6 and the standard error of the distribution of sample means is 1.322.

To know more about normal distribution visit:

brainly.com/question/28896737

#SPJ11

Question list K← Differentiate implicitty to find dxdy​. Then find the slope of the curve at the given point Question 1 9x2−8y3=225,(1,−3) Question 2 dxdy​= Question 3 Question 4 Question 5 Get more help -

Answers

The slope of the curve at the point (1, −3) is -4. We are given the implicit function 9x^2 − 8y^3 = 225, so we need to differentiate the function with respect to x to get the value of dxdy.9x^2 − 8y^3 = 225

Given, 9x^2 − 8y^3 = 225. We are required to find dxdy and slope of the curve at the point (1, −3).

We are given the implicit function 9x^2 − 8y^3 = 225, so we need to differentiate the function with respect to x to get the value of

dxdy.9x^2 − 8y^3 = 225

Differentiate both sides with respect to x, we get:

18x - 24y^2(dy/dx) = 0

⇒ 18x = 24y^2(dy/dx)

⇒ (dy/dx) = (18x) / (24y^2)

⇒ dxdy​ = (24y^2) / (18x)

We are given a function in terms of x and y, so we need to use implicit differentiation to find the value of dxdy. By implicit differentiation, we get

18x - 24y^2(dy/dx) = 0.

We can simplify it further as (dy/dx) = (18x) / (24y^2).

Hence, we get the value of dxdy as (24y^2) / (18x).

Now, we are required to find the slope of the curve at the given point (1, −3).

So, substitute the values of x and y in the value of dxdy, we get:

dxdy​ = (24y^2) / (18x)

⇒ dxdy​ = (24(-3)^2) / (18(1))

= -4

Substitute the value of x and y in the original equation, we get:

9x^2 − 8y^3 = 225

⇒ 9(1)^2 − 8(-3)^3 = 225

⇒ 9 − 8(−27) = 225

⇒ 9 + 216 = 225

⇒ 225 = 225

Therefore, the slope of the curve at the point (1, −3) is -4.

To know more about implicit functions visit:

https://brainly.com/question/31512919

#SPJ11

what is the LCM of 25, 90, 105​

Answers

Answer:

3150

Step-by-step explanation:

5. An n×n matrix N is said to be nilpotent if N k
=0 for some k∈N. (a) (6 points) Prove that I−N is invertible by finding (I−N) −1
. (Hint: Think of an analogue to the series 1−x
1

=1+x+x 2
+⋯ from calculus

Answers

We have proved that I - N is invertible, and its inverse is (I + N).

To prove that the matrix I - N is invertible, we can show that its determinant is non-zero.

Let's assume that N is a nilpotent matrix, which means there exists some positive integer k such that N^k = 0.

Now consider the matrix A = I + N. We want to prove that A is invertible, which implies that I - N is also invertible.

To find the inverse of A, let's consider the series expansion of the geometric progression:

(1 - x)^(-1) = 1 + x + x^2 + x^3 + ...

Comparing this series with the matrix A = I + N, we can see that x corresponds to -N. Since N is nilpotent, there exists some positive integer k such that N^k = 0. Therefore, (-N)^k = 0 as well.

Using the analogy, we can rewrite A^(-1) as:

A^(-1) = (I + N)^(-1) = I - N + N^2 - N^3 + ... + (-1)^(k-1)N^(k-1)

Note that all the terms beyond the (k-1)th term will be zero since N^k = 0.

Thus, we can simplify the series to:

A^(-1) = I - N + N^2 - N^3 + ... + (-1)^(k-1)N^(k-1)

Now, let's multiply A and A^(-1) together:

A * A^(-1) = (I + N) * (I - N + N^2 - N^3 + ... + (-1)^(k-1)N^(k-1))

Expanding this product, we can see that each term cancels out with the corresponding negative term, leaving only the first term I.

Therefore, we have:

A * A^(-1) = I

This shows that A = I + N is invertible, and its inverse is A^(-1) = I - N + N^2 - N^3 + ... + (-1)^(k-1)N^(k-1).

Hence, I - N is also invertible, and its inverse is I - N + N^2 - N^3 + ... + (-1)^(k-1)N^(k-1).

Therefore, we have proved that I - N is invertible, and its inverse is (I + N).

To know more about inverse refer here:

https://brainly.com/question/30339780#

#SPJ11

The state of matter that has the most probability of leaking Select one: a. mixture O b. none of the choices Oc. gas Od. solid Oe. liquid Question 12 Not yet answered Marked out of 1.00 P Flag question This if formless fluid that takes the shape of the container. Can be compressed, or expanded. Select one: a. liquid gas none of the choices mixture solid O b. O c. O d. O e. Question 13 Not yet answered Marked out of 1.00 F Flag question The most probable route of a toxic gas from the air into the human body Select one: O a. drinking O b. swallowing O C. inhalation O d. none of the choices Question 14 Not yet answered Marked out of 1.00 P Flag question Which of the following types of chemicals can be very toxic Select one: Oa. none of the choices O b. light metals O c. sugars Od. compounds Oe. heavy metals Question 15 Not yet answered Marked out of 1.00 Flag question Dermatitis usually involves swollen, itchy and reddened skin Select one: Oa. O b. True False. estion 16 yet wered ked out of 0 Flag question This is important when buying chemicals from a supplier to prevent accident in the use of the chemicals Select one: O a. none of the choices O b. temperature O c. material data sheet O d. state of matter Oe. price Question 17 Not yet answered Marked out of 1.00 P Flag question This is an example of an acute/short term effect Select one: O a. this is the effect after 20 years O b. O C. Od. e. a person died after drinking contaminated water a person experience paralysis after 10 years this is the effect after a long time none of the choices Question 18 Not yet answered Marked out of 1.00 P Flag question This is use to warn people of the dangers associated with chemicals Select one: O a. hardness O b. none of the choices Oc. pH O d. packaging Oe. GHS pictograms

Answers

The state of matter that has the most probability of leaking is gas. The particles can enter the lungs and bloodstream, leading to health problems or even death.

Gases have a tendency to escape their container or to fill any available space. This is because of the constant motion of gas particles, which leads to diffusion.

In a closed container, the pressure of the gas will eventually reach a point where it is high enough to cause leaks through any weak points in the container walls.

In addition, the formless fluid that takes the shape of the container, can be compressed or expanded is gas. Gases take the shape of their container because their particles are in constant random motion. Because they are not connected to each other like those of solids and liquids, they will expand to fill the volume of the container given to them.

The most probable route of a toxic gas from the air into the human body is through inhalation. This is the act of breathing in air or other substances that contain particles of a toxic gas. The particles can enter the lungs and bloodstream, leading to health problems or even death.

Learn more about constant here:

https://brainly.com/question/17550734

#SPJ11

Find the inverse of the matrix.
11
−8
3
−2
Question content area bottom
Part 1
Select the correct choice below​ and, if​ necessary, fill in the
answer box to complete your choice.
A.Th

Answers

The correct choice is A. The inverse of the given matrix is \[ \begin{bmatrix} -1 & 4 \\ -\frac{3}{2} & \frac{11}{2} \end{bmatrix} \]

To find the inverse of the matrix:

\[ \begin{bmatrix} 11 & -8 \\ 3 & -2 \end{bmatrix} \]

We can use the formula for a 2x2 matrix inverse:

If the matrix is \[ \begin{bmatrix} a & b \\ c & d \end{bmatrix} \]

Then its inverse is given by:

\[ \frac{1}{ad - bc} \begin{bmatrix} d & -b \\ -c & a \end{bmatrix} \]

Let's apply this formula to the given matrix:

\[ \begin{bmatrix} 11 & -8 \\ 3 & -2 \end{bmatrix} \]

Here, \( a = 11 \), \( b = -8 \), \( c = 3 \), and \( d = -2 \).

We can calculate the determinant:

\[ ad - bc = (11 \cdot -2) - (-8 \cdot 3) = -22 + 24 = 2 \]

Since the determinant (\( ad - bc \)) is non-zero (in this case, it is 2), the matrix is invertible.

Now, we can find the inverse:

\[ \frac{1}{2} \begin{bmatrix} -2 & 8 \\ -3 & 11 \end{bmatrix} \]

Therefore, the inverse of the given matrix is:

\[ \begin{bmatrix} -1 & 4 \\ -\frac{3}{2} & \frac{11}{2} \end{bmatrix} \]

So, the correct choice is A.

Learn more about matrix here

https://brainly.com/question/30389982

#SPJ11

ZILLDIFFEQMODAP11 7.R.003. Answer true or false. If f is not piecewise continuous on [0,[infinity]>), then L{f(t)} will not exist. True False Answer true or false. If L{f(t)}=F(s) and L{g(t)}=G(s), then L−1{F(s)G(s)}=f(t)g(t). True False

Answers

The statement given is: If f is not piecewise continuous on [0,[infinity]>), then L{f(t)} will not exist. TrueExplanation:Let f be a function which is not piecewise continuous on [0,∞). It means that at least one of the conditions is not met.

The first condition is that f is continuous on [0, ∞) except for finitely many points of discontinuity. The second condition is that f has exponential order.The Laplace transform of a function f(t) is given by

L{f(t)}=∫[0,∞)e^(-st)f(t)dt

Provided the integral exists, and the Laplace transform of f(t) exists only if the function is piecewise continuous on [0, ∞). Hence the given statement is True.Let L{f(t)}=F(s) and L{g(t)}=G(s). The statement is:

L−1{F(s)G(s)}=f(t)g(t).False

The inverse Laplace transform is defined as

L^-1(F(s)) = 1/2πj∫γF(s)e^(st)ds

where γ is a Bromwich contour in the complex plane that has the line

Re(s) = σ as a vertical asymptote and encloses all of the singularities of

F(s).If L{f(t)}=F(s) and

L{g(t)}=G(s),

then the Laplace transform of the product f(t)g(t) is given by

L{f(t)g(t)}=∫[0,∞)e^(-st)f(t)

g(t)dt=∫[0,∞)e^(-st)f(t)∫[0,∞)e^(-st)g(t)dt= F(s)G(s)

The inverse Laplace transform of F(s)G(s) is therefore given by

L^-1(F(s)G(s)) = L^-1(L{f(t)g(t)})= f(t)g(t)

Therefore the statement, L−1{F(s)G(s)}=f(t)g(t) is False.

To know more about function visit:

https://brainly.com/question/30721594

#SPJ11

Find the angle \( \theta \) between \( \vec{u}=6 \cos 104^{\circ} \vec{i}+6 \sin 104^{\circ} \vec{j} \) and \( \vec{w}=5 \cos 179^{\circ} \vec{i}+5 \sin 179^{\circ} \vec{j} \). \( \theta= \)

Answers

Consider the following vectors :

[tex]\[ \vec{u}=6 \cos 104^{\circ} \vec{i}+6 \sin 104^{\circ} \vec{j} \]and \[\vec{w}=5 \cos 179^{\circ} \vec{i}+5 \sin 179^{\circ} \vec{j}\][/tex]

We know that : [tex]\[\vec{a} \cdot \vec{b}=|\vec{a}|\cdot|\vec{b}| \cos(\theta)\][/tex]

The angle between the two vectors is[tex]$\theta$[/tex], and[tex]$\vec{a} \cdot \vec{b}$[/tex]  is the dot product of the two vectors. We can obtain the dot product from the above two vectors as:

[tex]\[\vec{u} \cdot \vec{w}=(6 \cos 104^{\circ})(5 \cos 179^{\circ})+(6 \sin 104^{\circ})(5 \sin 179^{\circ})\][/tex]

Thus, we get :[tex]\[ \vec{u} \cdot \vec{w}=-15.21 \][/tex]

Note that since the dot product is negative, the angle between the two vectors is greater than $\frac{π}{2}$, which means it's in the second quadrant. Now, we can use the formula :

[tex]\[ \cos \theta=\frac{\vec{u} \cdot \vec{w}}{|\vec{u}||\vec{w}|}\][/tex]

To find the cosine of the angle[tex][tex][tex]$\theta$[/tex][/tex][/tex], which we can then find using an inverse cosine function (i.e., [tex][tex][tex]$\cos^{-1}$[/tex][/tex]). So we have :[tex][tex]\[ \cos \theta=\frac{\vec{u} \cdot \vec{w}}{|\vec{u}||\vec{w}|}=\frac{-15.21}{30}\][/tex][/tex][/tex]Using a calculator, we get:

[tex]\[\cos \theta=-0.507\][/tex]

Then we take the inverse cosine function of -0.507 to get:

[tex]\[\theta = \cos^{-1}(-0.507) = 126.48^{\circ}\][/tex]

Hence, the angle [tex]$\theta$[/tex] between the vectors [tex]$\vec{u}$ and $\vec{w}$[/tex] is approximately [tex]$126.48^{\circ}$[/tex].

Therefore, the answer is 126.48.

To know more about  dot product visit :

https://brainly.com/question/23477017

#SPJ11

A company manufactures tennis balls. When its tennis balls are dropped onto a concrete surface from a height of 100 inches, the company wants the mean height the balls bounce upward to be 54.8 inches. This average is maintained by periodically testing random samples of 25 tennis balls. If the t-value falls between - t 0

.99 and t 0

.99, then the company will be satisfied that it is manufactuning acceptable tennis balls. A sample of 25 balls is randomly selected and tested. The mean bounce height of the sample is 56.5 inches and the standard deviation is 0.25 inch. Assume the bounce heights are approximately normally distributed. Is the company making acceptable tennis balis? Find −t 0.99

and t 0.99

. −t 0

99=
t 0

99=

Answers

The company is not making acceptable tennis balls according to the given criteria.

To determine if the company is making acceptable tennis balls, we need to compare the calculated t-value to the range of -t0.90 and t0.90.

Given:

Population mean (μ) = 55.4 inches

Sample mean ([tex]\bar x[/tex]) = 56.6 inches

Sample standard deviation (s) = 0.25 inches

Sample size (n) = 25

The formula to calculate the t-value is:

t-value = ([tex]\bar x[/tex] - μ) / (s / √n)

Substituting the given values:

t-value = (56.6 - 55.4) / (0.25 / √25) = 1.2 / (0.25 / 5) = 1.2 / 0.05 = 24

Since the t-value of 24 is larger than t0.90 (which corresponds to a smaller range of -t0.90 to t0.90), we can conclude that the t-value falls outside the acceptable range.

To know more about company:

https://brainly.com/question/30532251


#SPJ4

Find the indefinite integral: ∫ x 3
2x 4
−x+5

dx. Show all work. Upload photo or scan of written work to this question item.

Answers

According to the question the solution to the indefinite integral is:

[tex]\[\int \frac{x^3}{2x^4 - x + 5} \, dx = \frac{1}{8} \ln|2x^4 - x + 5| + C\][/tex]

To solve the indefinite integral [tex]\(\int \frac{x^3}{2x^4 - x + 5} \, dx\)[/tex], we can use partial fraction decomposition.

However, without any specific factors in the denominator, partial fraction decomposition may not be applicable. In such cases, we can try different approaches, such as substitution or integration by parts.

Let's attempt to solve this integral using a substitution:

Let  [tex]\(u = 2x^4 - x + 5\), then \(du = (8x^3 - 1) \, dx\).[/tex]

Rearranging the terms, we have:

[tex]\[\frac{1}{8} \int \frac{8x^3}{2x^4 - x + 5} \, dx = \frac{1}{8} \int \frac{du}{u}\][/tex]

Now, the integral becomes:

[tex]\[\frac{1}{8} \ln|u| + C\][/tex]

Substituting back [tex]\(u = 2x^4 - x + 5\),[/tex] we have:

[tex]\[\frac{1}{8} \ln|2x^4 - x + 5| + C\][/tex]

Therefore, the solution to the indefinite integral is:

[tex]\[\int \frac{x^3}{2x^4 - x + 5} \, dx = \frac{1}{8} \ln|2x^4 - x + 5| + C\][/tex]

To know more about integral visit-

brainly.com/question/32515395

#SPJ11

Given \( f(x)=-2 \times 3-9 \times 2+60 x+7 \). Find its critical values and its local extrema (local max and local min)

Answers

The critical values and their corresponding local extrema are:

Critical value: x = -5 and Local minimum: f(-5)

Critical value: x = 2 and Local maximum: f(2)

How to find the critical values and local extrema of a function?

To find the critical values and local extrema of the given function, we'll follow these steps:

Step 1: Find the derivative of the function.

Step 2: Set the derivative equal to zero and solve for x to find the critical values.

Step 3: Determine the second derivative.

Step 4: Use the second derivative test to classify the critical points as local maxima or minima.

Step 1:  the derivative of the function is:

f'(x) = -2(3x²) - 9(2x) + 60 = -6x² - 18x + 60

Step 2: To find the critical values, we set the derivative equal to zero and solve for x:

-6x² - 18x + 60 = 0

Step 3: Solve the quadratic equation.

-6x² - 18x + 60 = 0

x² + 3x - 10 = 0    (Divide through by -6)

(x - 2)(x + 5) = 0    (Factorize)

x = 2 or x = -5

This gives two potential critical values: x = -5, and x = 2.

Step 4: Determine the second derivative.

To determine the second derivative, we differentiate the first derivative:

f''(x) = d/dx(-6x² - 18x + 60)

= -12x - 18.

Step 5: Apply the second derivative test.

We evaluate the second derivative at each critical value to classify them as local maxima or minima.

For x = -5:

f''(-5) = -12(-5) - 18

= 60 - 18

= 42,

which is positive. So, at x = -5, we have a local minimum.

For x = 2:

f''(2) = -12(2) - 18

= -24 - 18

= -42,

which is negative. So, at x = 2, we have a local maximum.

Therefore, the critical values and their corresponding local extrema are:

Critical value: x = -5

Local minimum: f(-5)

Critical value: x = 2

Local maximum: f(2)

Learn more about critical values of function on:

https://brainly.com/question/29144288

#SPJ4

Find The Critical Points Of The Function F(X,Y)=X2+Y2−6x−8y. B) Using The Lagrange Multipliers Method Find

Answers

The critical points of the function f(x, y) = x^2 + y^2 - 6x - 8y are (3, 4).

To find the critical points of the function f(x, y) = x^2 + y^2 - 6x - 8y, we need to find the points where the gradient of the function is equal to zero.

Step 1: Find the partial derivatives of f(x, y) with respect to x and y:

∂f/∂x = 2x - 6

∂f/∂y = 2y - 8

Step 2: Set the partial derivatives equal to zero and solve for x and y:

2x - 6 = 0

2y - 8 = 0

Solving these equations, we find:

x = 3

y = 4

Therefore, the critical point of the function f(x, y) is (3, 4).

Now, using the Lagrange multipliers method, we can find the constrained critical points.

Let's say we have a constraint g(x, y) = k, where k is a constant. In this case, we don't have a specific constraint given, so we can skip this step.

Step 1: Set up the Lagrangian function L(x, y, λ) = f(x, y) - λ(g(x, y) - k). Since we don't have a constraint, we can set L(x, y, λ) = f(x, y).

L(x, y) = x^2 + y^2 - 6x - 8y

Step 2: Find the partial derivatives of L(x, y) with respect to x, y, and λ:

∂L/∂x = 2x - 6

∂L/∂y = 2y - 8

Step 3: Set the partial derivatives equal to zero and solve for x, y, and λ:

2x - 6 = 0

2y - 8 = 0

Solving these equations, we get:

x = 3

y = 4

Therefore, the critical point of the function f(x, y) using the Lagrange multipliers method is also (3, 4).

In summary, the critical points of the function f(x, y) = x^2 + y^2 - 6x - 8y are (3, 4).

Learn more about functions from

https://brainly.com/question/11624077

#SPJ11

Other Questions
Complete the statement 8 ounces is to 1 cup as ounces is 10 cups If the density of the object varies linearly with x-that is, =x , where is a positive constant-calculate the x-coordinate of the rod's center of mass. Express your answer in terms of some or all of the variables , M , L , and A . 1) How many amino acid residues are required for an alpha-helix to span 45 ?2) How many amino acid residues are required for a parallel beta-strand to span 45 ?3) How many amino acid residues are required for an antiparallel b(beta)-strand to span 45 ? The mean number of goals a water polo team scores per match in the first 9 matches of a competition is 7. a) How many goals does the team score in total in the first 9 matches of the competition? b) If the team scores 2 goals in their next match, what would their mean number of goals after 10 matches be? In each of these scenarios, a credit card company has violated a federal or state law. Match each act to the scenario that applies. Caden started a new publication called Contest News. Its subscribers pay $36 to receive 12 monthly issues. With every new subscriber, Caden debits Cash and credits Unearned Subscription Revenue for the amounts received. The company has 100 now subscribers as of July 1. It sends Contest News to each of these subscribers every month from July through December Assuming no changes in subscribers, prepare the year-end journal entry that Caden must make as of December 31 to adjust the Subscription Revenue account and the Unearned Subscription Revenue account. Unearned subscription revenue Step 1: Determine what the current account balance equals. Step 2: Determine what the current account balance should equal. Step 3: Record the December 31 adjusting entry to get from step 1 to step 2. which value is equivalent to the expression shown? 3(1/4-2) + |-7| Write the PHP syntax for a user defined function called "averageNumbers" which takes in 3 numbers as atguments (20, 15,25) and calculates the average number. It then displays the following message: "The average of these 3 numbers is: X " (X represents the average value) when the function is called. You should use good programming style (5) Explain why a user-defined function, rather than a built-in function is being used in the program above (3) If the program also contained an array, and we wanted the program to display the number of values contained in the array - which function would you use to return this information? Can this function also be used for regular variables provide a threats or safeguard of this Casestudy Case Study 5: Question: You have recently been promoted as a partner in the assurance department of a firm of chartered accountants. Your portfolio of clients includes Shah Motors (Pvt.) Limited (SML), a leading car dealer. Qaiser, a senior manager assurance in your firm, has been auditing SML for the past 7 years. While updating you about SML, Qaiser informed about the following. (1) On the request of an audit team member, CFO of SML has helped the team member's brother in securing early delivery of a vehicle ordered by him on preferential basis. (ii) SML has hired a new Head of Marketing. His son Amjad is expected to be included as a junior team member in SML's audit team. Required: (ICAP, CAF 08 Level - Autumn 2018, Q#5a) Discuss the possible threats which may arise, their significance and the safeguards required to mitigate those threats (10) Which example is a specific question that could be used to start a scientific investigation? A. Do long droughts increase the likelihood of forest fires B. Should there be more services to prevent forest fires C. Are forest fires as frightening as mudslides D. What is the most devastating effect of a forest fire A cone with height h and radius r has a lateral surface area (the curved surface only, excluding the base) of S = +h. Complete pa C a. Estimate the change in the surface area when r increases from r= 2.30 to r= 2.35 and h decreases from h = 0.66 to h = 0.64. The estimated change in surface area is (Round to three decimal places as needed.) b. When r = 100 and h = 200, is the surface area more sensitive to a small change in r or a small change in h? Explain. Find dS for r= 100 and h = 200. A survey of cars on a certain stretch of highway during morning commute hours showed that 70% had only one occupant, 15% had 2, 10% had 3, 3% had 4, and 2% had 5. Let X represent the number of occupants in a randomly chosen car. Find P(X 2) A survey of cars on a certain stretch of highway during morning commute hours showed that 70% had only one occupant, 15% had 2, 10% had 3, 3% had 4, and 2% had 5. Let X represent the number of occupants in a randomly chosen car. Find P(X > 3) A.0.05 B.0.15 C.None of the Choices D.0.03 E.0.02 How was the Declaration of Independence organized? What practical purpose did this organization serve? What did each part seek to accomplish?What are the reasons that William Murray, Earl of Mansfield says that Parliament has the right to tax the colonies? Take a position as to whether his arguments were reasonable and justify your stand Using the analemma, ( print it from the file), find the latitude with subsolar points ( vertical rays of the sun on the following dates. ( remember to write the latitude in the following format. 66.5 degrees south.. etc.1. January 102. June 213. March 64. December 21 Find the first partial derivatives of the function. f(x,y)=y 56xy f x(x,y)= f y(x,y)= Find the first partial derivatives of the function. f(x,t)=e 4tcosx f x(x,t)=f t(x,t)=Find the first partial derivatives of the function. z=(4x+9y) 6xz=yz=Find the first partial derivatives of the function. f(x,y)= x+yxyf x(x,y)= f y(x,y)= Draw the lewis structure of the polymer NEOPRENE also known asPOLYCHLOROPRENE. how do you create effective emails? what can you do to ensure the receiver actually reads the email? what is a signature block and why should it be used? is email a binding contract? what rules should i follow when creating and responding to emails? please understand the goals of email communication in business. is there a minimum or maximum for e-mail message length? review the best practices for writing emails. this may be a short answer essay question. an ecosystem experiences a massive flood that washes away soil and kills organisms The dust that produces the Perseid meteor shower actually originates from... The constellation of Perseus. The constellation Swift-Tuttle. The comet Swift-Tuttle. A meteor is... A small object located in outer space. A bright trail produced by a small object from outer space that burns in Earth's atmosphere. A small object from outer space that survived after burning in Earth's atmosphere and hit the ground. Suppose you are given a relation R(A, B, C, D, E) with the following functional dependencies: BDE, AC. a. Show that the decomposition into R1(A,B,C) and R2(D,E) is lossy. b. Find a single dependency from a single attribute X to another attribute Y such that when you add the dependency XY to the above dependencies, the decomposition in part a is no longer lossy.