Find the change in enthalpy (∆H) for the reaction below. Round your answer to the nearest 0.1 and include proper units.
XaZQ(s) + QBg(aq) --> XaBg(aq) + Q2Z(l)

The following information is available:
XaZQ(aq) -->XaZQ(s) ∆H = 6.8 kJ
XaZQ(aq) + QBg(aq) --> XaBg(aq) + Q2Z(l) ∆H = 50.5 kJ

Your Answer:

After 45.0 hours, 3.4375 grams of sodium-24 are left in the 27.5-gram sample.


To find the remaining amount of sodium-24 after 45.0 hours, we will use the half-life formula:
Final Amount = Initial Amount * (1/2)^(Time / Half-Life)
Here, the initial amount of sodium-24 is 27.5 grams, the half-life is 15.0 hours, and the time passed is 45.0 hours.
Final Amount = 27.5 * (1/2)^(45.0 / 15.0)
First, calculate the number of half-lives by dividing the time passed by the half-life:
45.0 / 15.0 = 3
Now, apply the formula:
Final Amount = 27.5 * (1/2)^3
Final Amount = 27.5 * (1/8)
Final Amount = 3.4375 grams
So, after 45.0 hours, 3.4375 grams of sodium-24 remain in the sample.

Learn more about half-life here:

https://brainly.com/question/24710827

#SPJ11

The molar solubility of Li3PO4 in a 1M LiCl solution is 2.37 x 10^-4 M. To calculate the molar solubility of Li3PO4 in a 1M LiCl solution, we need to use the common ion effect.

This effect occurs when a salt that contains an ion in common with the solute is added to the solution, which reduces the solubility of the solute. In this case, the common ion is Li+ from LiCl. We can use the Ksp equation for Li3PO4 and the equilibrium expression for LiCl to solve for the molar solubility of Li3PO4.

Ksp = [Li+]^3[PO4^-3]

[Li+] = 1M (from the LiCl solution)

2.37 x 10^-4 = (1M)^3 [PO4^-3]

[PO4^-3] = 2.37 x 10^-4 / (1M)^3

[PO4^-3] = 2.37 x 10^-4 M

Therefore, the molar solubility of Li3PO4 in a 1M LiCl solution is 2.37 x 10^-4 M.

To know more about solubility, check out:

brainly.com/question/9098308

#SPJ11

In a unit cell of TiO2, there are a total of 4 Ti4+ ions, each occupying a vertex of the unit cell. Additionally, there are 2 oxygen ions located at the center of each edge of the unit cell.

This means that there are 8 oxygen ions in total. Furthermore, each face of the unit cell contains one Ti4+ ion, which brings the total number of Ti4+ ions to 12 in a single unit cell. Therefore, the total number of ions contained in a unit cell of TiO2 is 4 + 8 + 12 = 24 ions.
In a unit cell of TiO2 with a Ti4+ ion located at the center of each face, there are six faces. Since each ion is shared by two adjacent cells, the contribution of Ti4+ ions per unit cell is 1/2 × 6 = 3 ions. Additionally, the TiO2 formula indicates a 1:2 ratio of Ti4+ to O2- ions. Therefore, the unit cell contains 6 O2- ions to maintain the ratio. In total, the unit cell contains 3 Ti4+ ions and 6 O2- ions, resulting in a total of 9 ions within the cell.

Learn more about the ions here

https://brainly.com/question/29183072

#SPJ11

The body-centered cubic lattice has atoms located at each corner of a cube and one atom located in the center of the cube. In this case, metallic tungsten has one atom (W) per lattice point in this arrangement.

The edge length of the unit cell is given as 316 pm. Since the metallic tungsten is located at the center of the cube, it is touching atoms at each of the corners of the cube. Using this information, we can calculate the metallic radius of W by dividing the edge length by the square root of 3, which is the number of radii in the body diagonal of the cube. Thus, the metallic radius of W is (316 pm) / sqrt(3) = 182.4 pm.

Metallic tungsten (W) crystallizes in a body-centered cubic (BCC) lattice, where one W atom is at each lattice point. In a BCC unit cell, the relationship between the edge length (a) and the metallic radius (r) is given by the equation: a = 4r/√3. Given that the edge length of the unit cell is 316 pm, we can find the metallic radius of W using this formula. Rearrange the equation as r = a√3/4, and substitute the given edge length: r = (316 pm)(√3)/4 ≈ 136.4 pm. Thus, the metallic radius of tungsten is approximately 136.4 pm.

To know about lattice:

https://brainly.com/question/31670105

#SPJ11

Tert-butyl groups are locked into the equatorial position in certain molecules to minimize steric hindrance caused by 1,3-diaxial interactions. This arrangement is energetically favorable as it reduces the repulsive interactions between the bulky tert-butyl group and neighboring substituents.

The equatorial position is preferred for tert-butyl groups in certain molecules due to steric hindrance considerations. When a tert-butyl group is axial, it experiences unfavorable interactions with the neighboring substituents on the same or adjacent carbon atoms. These interactions are known as 1,3-diaxial interactions and can lead to increased energy and distortion in the molecule. By placing the tert-butyl group in the equatorial position, it is oriented away from the neighboring substituents, reducing steric hindrance and minimizing the 1,3-diaxial interactions. This arrangement allows for a more stable conformation of the molecule, as the bulky tert-butyl group is positioned in a way that maximizes the distance between itself and other substituents. Consequently, the equatorial position is energetically favorable and helps maintain the overall stability of the molecule.

Learn more about steric hindrance here: brainly.com/question/11531237

#SPJ11

The correct answer to this question is B) The vibration energy increases.

When a molecule absorbs a photon of infrared light, it gains energy that is transferred to its atoms. This energy is then used to increase the amplitude of the molecule's vibrational motion. Infrared radiation is absorbed by molecules that possess a dipole moment, which means that there is a separation of charge within the molecule. As the molecule vibrates, the distance between the atoms changes, causing the dipole moment to oscillate. The frequency of this oscillation corresponds to the energy of the absorbed photon. Thus, infrared spectroscopy can be used to identify the types of bonds present in a molecule based on the frequency of the absorbed radiation. The other options listed in the question are not relevant to the absorption of infrared light by a molecule.

To learn more about vibration click here: brainly.com/question/19511235

#SPJ11

To synthesize 1-bromo-3-chlorobenzene starting from benzene, a multi-step process would be required. This process would involve several reactions to introduce the bromo and chloro groups onto the benzene ring.

The first step would be to introduce a nitro group onto the benzene ring via nitration using a mixture of concentrated nitric acid and sulfuric acid. The nitro group would then be reduced to an amino group using a reducing agent such as iron and hydrochloric acid.

Next, the amino group would be diazotized using sodium nitrite and hydrochloric acid to form a diazonium salt. This diazonium salt would then be coupled with cuprous chloride to form a chlorobenzene ring.

Finally, the chlorobenzene would be further reacted with sodium bromide and hydrobromic acid to replace the chlorine atom with a bromine atom, forming 1-bromo-3-chlorobenzene. Overall, this synthesis would require several steps and careful control of reaction conditions to ensure high yields and purity of the desired product.

To know more about benzene visit:-

https://brainly.com/question/26719048

#SPJ11

For a titration between 0.10 M HCOOH and 0.10 M NaOH, the best indicator to use would be phenolphthalein. This is because the pH range for the equivalence point of this particular titration is around 8.2-10.0, which is well within the range that phenolphthalein changes color (pH 8.2-10.0).

Other indicators such as bromocresol green and methyl orange have pH ranges that do not match the equivalence point pH range for this titration, so they would not be ideal choices. Phenolphthalein is a commonly used indicator for acid-base titrations and is readily available in most chemistry labs.

The best indicator for a titration between 0.10 M HCOOH (formic acid) and 0.10 M NaOH (sodium hydroxide) would be phenolphthalein. This is because the reaction between HCOOH and NaOH is a weak acid-strong base titration. Phenolphthalein has a pH range of 8.2 to 10.0, where it changes from colorless to pink, making it suitable for detecting the equivalence point in this titration. The equivalence point will be slightly above pH 7 due to the weak acid-strong base combination, and phenolphthalein effectively indicates this transition.

Learn more about indicator here:

https://brainly.com/question/12489874

#SPJ11

If the plot of ln p versus t is linear, it means that the reaction follows first-order kinetics. This is because the natural logarithm of a concentration versus time plot for a first-order reaction gives a straight line with a negative slope.

Therefore, option (d) is the correct answer, which states that the reaction is first order in CH3NC.

A linear plot suggests that the rate of the reaction is directly proportional to the concentration of CH3NC, indicating that the rate of the reaction increases as the concentration of CH3NC increases. However, if the plot were curved, the reaction would follow zero, second, or third-order kinetics. Therefore, there is no need for more information as the plot provides enough information to conclude the order of the reaction.

From a graph where the plot of ln(pressure) versus time is linear instead of curved for the conversion of methyl isonitrile into acetonitrile, we can conclude that the reaction is first order in CH3NC (d). This is because a linear plot of ln(pressure) versus time indicates that the rate of reaction is directly proportional to the concentration of the reactant, which is a characteristic of a first-order reaction.

learn more about the methyl here

https://brainly.com/question/31490464

#SPJ11

When plant cells are placed in a high salt (10%) solution, water is drawn out of the cells due to osmosis, causing the cells to shrink and become flaccid. This process is known as plasmolysis and can damage the cell wall, affecting the plant's ability to perform vital functions.

Plant cells have a semi-permeable membrane called the cell wall, which allows water and certain substances to pass through. When a plant cell is placed in a high salt solution, the concentration of salt outside the cell becomes higher than the concentration inside the cell.

As a result, water molecules move out of the cell through osmosis, towards the region of high salt concentration, causing the cell to lose water and shrink. This process is called plasmolysis, and it can cause the cell membrane to detach from the cell wall, leading to damage to the cell wall.

The effects of plasmolysis can also affect the functioning of the plant as a whole. For instance, the plant's ability to photosynthesize, produce energy, and maintain its shape can be compromised.

Additionally, the plant may also undergo wilting, which can cause irreversible damage in some cases. To prevent plasmolysis, plants have adapted to maintain a balance of water and salt concentrations through various mechanisms such as active transport and osmoregulation.

Visit here to learn more about photosynthesize:

brainly.com/question/19160081

#SPJ11

The yield of a single crossed aldol product can be increased by using a less reactive carbonyl compound as the reactant and carefully controlling the temperature of the reaction. By following these guidelines, chemists can maximize the yield of the desired product in a crossed aldol reaction.

A crossed aldol reaction is a type of organic reaction where two different carbonyl compounds are used as reactants. The reaction results in the formation of a single product known as the aldol product. The yield of the aldol product in a crossed aldol reaction can be influenced by several factors. To increase the yield of a single crossed aldol product, the reaction conditions should be carefully controlled.
One way to increase the yield of a single crossed aldol product is to use a less reactive carbonyl compound as the reactant. The less reactive carbonyl compound will not participate in the reaction as readily as the more reactive carbonyl compound. This will allow the more reactive carbonyl compound to react selectively with the enolate of the less reactive carbonyl compound. The selectivity of the reaction will result in a higher yield of the desired product.
Another way to increase the yield of a single crossed aldol product is to carefully control the temperature of the reaction. The temperature should be kept at a level that allows for a slow and controlled reaction. A slow and controlled reaction will allow for the formation of the desired product, while minimizing the formation of unwanted side products.

To know more about aldol product visit :

https://brainly.com/question/31559331

#SPJ11

We need 132.7 ml of the sulfuric acid solution to neutralize the sodium hydroxide solution.

In order to find the amount of sulfuric acid needed to neutralize the sodium hydroxide solution, we need to use the balanced chemical equation for the neutralization reaction between sodium hydroxide and sulfuric acid: NaOH + H2SO4 → Na2SO4 + 2H2O. From this equation, we know that one mole of NaOH reacts with one mole of H2SO4.

First, we need to determine the number of moles of NaOH in 208.1 ml of 0.6450 m solution. We can use the formula Molarity = moles/liters to find that there are 0.1344 moles of NaOH in 208.1 ml of solution.

Since the reaction is 1:1, we need 0.1344 moles of H2SO4 to neutralize the NaOH. To find the volume of the 0.550 m solution of H2SO4 needed to provide this many moles, we can use the formula Volume = moles/Molarity. Plugging in the numbers, we find that we need 0.073 moles of H2SO4, which corresponds to 132.7 ml of the 0.550 m solution.

Therefore, we need 132.7 ml of the sulfuric acid solution to neutralize the sodium hydroxide solution.

To know about acid :

https://brainly.com/question/29796621

#SPJ11

0.1 M HCl was added to a water sample, leading to a decrease in pH. However, when one drop of HCl was added to each buffer solution, the pH change was minimal due to the mixture of weak acids and bases that neutralize the effect of the added HCl.

In Activity 1, when 0.1 M HCl was added to the water sample, the pH of the sample decreased. This is because HCl is a strong acid and it completely dissociates in water, releasing H+ ions which lowers the pH.
On the other hand, when one drop of 0.1 M HCl was added to each buffer solution, the pH of the buffer solutions did not change significantly. This is because buffer solutions contain a weak acid and its conjugate base (or a weak base and its conjugate acid) which can resist changes in pH when small amounts of acid or base are added. The weak acid will neutralize some of the H+ ions from the added HCl, while the conjugate base will remove some of the OH- ions produced by the reaction, thus keeping the pH relatively stable.
To know more about buffer solution Visit:

https://brainly.com/question/31367305

#SPJ11

Bromobenzene is generally unreactive in both SN1 and SN2 reactions due to the strong bond between the carbon and the benzene ring. This bond makes it difficult for the nucleophile to approach the carbon and participate in a substitution reaction.

In SN1 reactions, the leaving group departs first to form a carbocation intermediate, which is then attacked by the nucleophile. In SN2 reactions, the nucleophile attacks the substrate at the same time as the leaving group departs.

However, bromobenzene has a benzene ring attached to the carbon, which has a strong bond that makes it difficult for the nucleophile to approach and participate in a substitution reaction.

The benzene ring is electron-rich and creates a cloud of electrons around the carbon, making it less accessible to incoming nucleophiles.

Additionally, the carbon atom is sp2 hybridized, which means that the orbital that would typically participate in nucleophilic substitution is occupied by the electrons in the benzene ring.

These factors make it challenging for bromobenzene to undergo SN1 and SN2 reactions, which typically require a more reactive substrate with less steric hindrance.

Visit here to learn more about electrons:

brainly.com/question/860094

#SPJ11

If the density of acetic anhydride is 1.08 g/ml. tools x10y ml, the volume (ml)  is 2.314814815 x 10^-1 ml.

To convert 250 mg of acetic anhydride to ml, we need to use its density, which is 1.08 g/ml. First, we need to convert 250 mg to grams by dividing it by 1000:

250 mg ÷ 1000 = 0.25 g

Then, we can use the formula:

Volume (ml) = Mass (g) ÷ Density (g/ml)

Volume (ml) = 0.25 g ÷ 1.08 g/ml

Volume (ml) = 0.2314814815 ml

To write this in scientific notation, we can use the tools x10y format:

Volume (ml) = 2.314814815 x 10^-1 ml

More on acetic anhydride: https://brainly.com/question/14487402

#SPJ11

In the electrophilic aromatic substitution reaction, a benzene ring undergoes sulfonation when it reacts with sulfur trioxide (SO3) in the presence of a strong acid catalyst.

This reaction results in the substitution of a hydrogen atom on the benzene ring with a sulfonic acid group (-SO3H) the electrophile in this reaction is the sulfur trioxide molecule, which acts as an electrophile due to its highly polarized nature. It has a strong affinity for electron-rich areas of the benzene ring, which enables it to attack the aromatic ring and form a highly reactive intermediate. This intermediate then reacts with the catalyst, which helps to stabilize the negative charge on the intermediate and facilitate the addition of the -SO3H group to the benzene ring.

Overall, the sulfonation in the electrophilic aromatic substitution reaction is a key step in the synthesis of many important organic compounds, including dyes, pharmaceuticals, and pesticides. By understanding the role of the electrophile in this reaction, chemists can design more efficient and effective synthetic routes for these compounds.

To know more about substitution reaction visit:

https://brainly.com/question/30239668

#SPJ11

The rate constant of the reaction at 700.8°C calculated by Arrhenius equation is approximately 1.24 × 10^10 L mol^(-1) s^(-1).

To find the rate constant at 700.8°C, we will use the Arrhenius equation: k = A * exp(-Ea / (R * T)), where k is the rate constant, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant (8.314 J mol^(-1) K^(-1)), and T is the temperature in Kelvin.

First, convert the temperatures to Kelvin: 800.8°C = 1074K and 700.8°C = 974K.

Using the given rate constant at 800.8°C, calculate the pre-exponential factor (A) by rearranging the equation.

Then, use the calculated A value and the temperature of 974K to find the rate constant at 700.8°C.

Learn more about rate constant here:

https://brainly.com/question/20305922

#SPJ11

The equilibrium constant can be calculated using the relationship ΔGo = -RTln(K), where R is the gas constant and T is the temperature in kelvin. By rearranging this equation, we can solve for K. The correct answer is 6.82 × 10^4.

To explain this further, ΔGo represents the standard free energy change of a reaction, which is a measure of the molecular amount of useful work that can be obtained from the reaction. If ΔGo is negative, then the reaction is exergonic and will proceed spontaneously in the forward direction. K is the equilibrium constant, which is a measure of the ratio of the concentrations of the products to the concentrations of the reactants at equilibrium. A larger value of K indicates that the products are favored at equilibrium, while a smaller value of K indicates that the reactants are favored. The relationship between ΔGo and K allows us to determine the equilibrium constant of a reaction based on its free energy change.

To learn more about molecule click here: brainly.com/question/30465503

#SPJ11

Answer:

The pH at the equivalence point is 7.00.

When 25.00 mL of 0.1000 M CH3COOH is titrated with 0.1000 M NaOH, the reaction is:

CH3COOH + NaOH → CH3COO- + H2O

At the equivalence point, the number of moles of CH3COOH is equal to the number of moles of NaOH. This means that the concentration of CH3COO- is equal to the concentration of H+.

The pKa of CH3COOH is 4.75. This means that the pH at the equivalence point is 14 - pKa = 7.00.

Here is the calculation:

pH = -log[H+]

pH = -log[10^(-4.75)]

pH = 7.00

Explanation:

If a sample of benzil is wet with recrystallization solvent, EtOH/water, it can lead to a lower melting point (mp) compared to a dry sample.

This is because the presence of moisture in the sample can disrupt the crystal lattice structure, which in turn can result in a lower melting point. During recrystallization, a solvent is used to dissolve the impurities in the sample, and when the sample is cooled, the impurities are removed, leaving behind pure crystals. However, if the sample is wet, the solvent may dissolve the crystal structure, leading to the formation of smaller crystals with a lower melting point. Therefore, it is important to ensure that the sample is completely dry before determining the melting point to get accurate results.

When a sample of benzil is wet with recrystallization solvent, such as EtOH/water, it can impact the melting point (mp) of the sample. The presence of the solvent lowers the mp, as it dilutes the pure benzil and creates an impure mixture. This phenomenon is known as melting point depression. The impurities in the mixture disrupt the crystal lattice, causing the substance to melt at a lower temperature than the pure benzil would. Therefore, it's essential to ensure that the benzil sample is thoroughly dried before determining its melting point to avoid inaccuracies in measurement.

To know about benzil visit:

https://brainly.com/question/31560153

#SPJ11

Let's consider the following nuclear decay reaction: Uranium-238 → Thorium-234 + Helium-4

In this reaction, Uranium-238 undergoes alpha decay, where it loses an alpha particle (consisting of two protons and two neutrons) to form Thorium-234 and Helium-4.

This means that Uranium-238 has undergone transmutation, as it has transformed into a different element (Thorium-234) through the process of alpha decay.

Transmutation refers to the conversion of one element into another through nuclear reactions.

Thus, in this case, the uranium nucleus has transformed into a thorium nucleus, which is a different element with a different number of protons. Therefore, the decay reaction involves transmutation.

For more details regarding nuclear decay, visit:

https://brainly.com/question/12224278

#SPJ1

Your question seems incomplete, the probable complete question is:

Use the nuclear decay reaction

[tex]^1_0n+^{235}_{92}U--- > ^{141}_{56}Ba+^{92}_{36}Kr+3^1_0n[/tex]

to answer the following questions. Does undergo transmutation? Explain your answer.

The substances that will be written as two separate ions in a complete ionic equation are KNO3(aq), NH3(g), and H2O(l). PbI2(s) will not be written as two separate ions since it is a solid and not present as ions in solution.

1. A complete ionic equation is a balanced chemical equation that shows all the ions in solution and their charges. In order for a substance to be written as two separate ions in a complete ionic equation, it must be present in solution as ions.

2. KNO3(aq) will be written as two separate ions in a complete ionic equation because it is a soluble ionic compound that dissociates in water. When KNO3 dissolves in water, it dissociates into K+ and NO3- ions.

3. NH3(g) will also be written as two separate ions in a complete ionic equation because it is a weak base that ionizes in water. When NH3 dissolves in water, it reacts with water to form NH4+ and OH- ions.

4. H2O(l) will also be written as two separate ions in a complete ionic equation because it undergoes self-ionization in water to form H+ and OH- ions.

5. On the other hand, PbI2(s) will not be written as two separate ions in a complete ionic equation because it is a solid and not present as ions in solution. When PbI2 dissolves in water, it forms a saturated solution of PbI2 molecules, but not ions.

Learn more about self-ionization here: brainly.com/question/27549438

#SPJ11

The concentration of KCl in the final solution is 0.067 M.To find the concentration (m) of KCl in the solution made by mixing 25.0 ml of 0.100 M KCl with 50.0 ml of 0.100 M KCl, we can use the formula:

M1V1 + M2V2 = M3V3

where M1 and V1 are the initial concentration and volume of the first solution, M2 and V2 are the initial concentration and volume of the second solution, and M3 and V3 are the final concentration and volume of the mixed solution.

Substituting the given values, we get:

(0.100 M) (25.0 ml) + (0.100 M) (50.0 ml) = M3 (75.0 ml)

Solving for M3, we get:

M3 = (0.100 M x 25.0 ml + 0.100 M x 50.0 ml) / 75.0 ml

M3 = 0.067 M

Therefore, the concentration of KCl in the final solution is 0.067 M.

To know about concentration :

https://brainly.com/question/3045247

#SPJ11

In a hydrogen fuel cell, hydrogen is oxidized at the anode.

At the anode of a hydrogen fuel cell, hydrogen molecules (H2) lose electrons through oxidation, which results in the production of positively charged hydrogen ions (protons) and free electrons. The chemical reaction can be represented as:
[tex]H_{2} -> 2H^{+} + 2e^{-][/tex]
The hydrogen ions move through the electrolyte towards the cathode, while the electrons travel through an external circuit, generating an electric current.
In a hydrogen fuel cell, the correct answer is that hydrogen is oxidized at the anode, leading to the production of hydrogen ions and electrons, which ultimately generates electricity.

For more information on hydrogen fuel cell kindly visit to

https://brainly.com/question/31871948

#SPJ11

The reagent that can oxidize Ag to Ag⁺ without oxidizing F⁻ to F₂ is Br₂.

Br₂ is a strong oxidizing agent that can oxidize Ag to Ag⁺ by accepting electrons from Ag atoms, as the reduction potential of Br₂ is higher than that of Ag. However, Br₂ cannot oxidize F⁻ to F₂ as F⁻ is a weaker reducing agent than Br₂, and the reduction potential of F⁻ is lower than that of Br₂.

The other reagents listed in the options cannot selectively oxidize Ag to Ag⁺ without oxidizing F⁻ to F₂. Co₂⁺ and Co can act as oxidizing agents, but they cannot oxidize Ag to Ag+ as their reduction potentials are lower than that of Ag. Ca and Ca₂⁺ are reducing agents, and therefore, cannot oxidize Ag to Ag⁺

Thus, option E is correct.

To learn more about the oxidizing agent, follow the link:

https://brainly.com/question/10547418

#SPJ1

Plugging in the values and converting the percentage to decimal form, we get the volume of solution needed to be 400. mL. Therefore, the answer is B) 400. mL.

To determine the answer, we need to use the formula:
% (w/v) = (mass of solute/volume of solution) x 100
We are given that we need to provide 20.0 g of glucose and the solution is 5.00% (w/v) glucose. We can rearrange the formula to solve for the volume of solution:
Volume of solution = mass of solute / % (w/v)
Plugging in the values:
Volume of solution = 20.0 g / 5.00%
Converting the percentage to decimal form:
Volume of solution = 20.0 g / 0.0500
Volume of solution = 400. mL
Therefore, the answer is B) 400. mL.
In this problem, we are asked to determine the volume of a 5.00% (w/v) glucose solution needed to provide 20.0 g of glucose. We can use the formula % (w/v) = (mass of solute/volume of solution) x 100 to solve the problem. By rearranging the formula to solve for the volume of solution, we get volume of solution = mass of solute / % (w/v). We are given that we need to provide 20.0 g of glucose and the solution is 5.00% (w/v) glucose.

To know more about glucose visit:

https://brainly.com/question/13555266

#SPJ11

The average molar bond enthalpy of the carbon-chlorine bond in a CCl₄ molecule is 338.6 kJ mol^-1.


To calculate the average molar bond enthalpy of the carbon-chlorine bond in a CCl₄ molecule, we need to use the bond dissociation enthalpy equation:
ΔH = Σ(bond enthalpies of reactants) - Σ(bond enthalpies of products)

We know that the enthalpy of formation of CCl₄ is -95.7 kJ mol^-1, which means the energy released when one mole of CCl₄ is formed from its elements. Using this information and the enthalpies of formation of carbon and chlorine, we can calculate the bond enthalpy of the carbon-chlorine bond to be 338.6 kJ mol^-1.

Similarly, for CCl₃I, we can use the same equation and the enthalpies of formation of CCl₃I, carbon, and chlorine to calculate the bond enthalpy of the carbon-chlorine bond to be 277.5 kJ mol^-1.

Learn more about bond enthalpy here:

https://brainly.com/question/28984638

#SPJ11

The molar solubility of BaF2 in a solution containing 0.0750 M LiF is 9.28×10−4 M.

To determine the molar solubility of BaF2 in a solution containing 0.0750 M LiF, we need to use the common ion effect. LiF will dissociate in solution to produce Li+ and F- ions, which will already be present in the solution. The addition of BaF2 will introduce more F- ions, which will cause a shift in the equilibrium of the dissolution reaction of BaF2, reducing the solubility.

First, we need to write the dissolution equation and the Ksp expression for BaF2:
BaF2(s) ⇌ Ba2+(aq) + 2F-(aq)
Ksp = [Ba2+][F-]^2 = 2.45×10−5

Next, we need to calculate the initial concentration of F- ions in the solution, which is equal to the concentration of LiF since it is a strong electrolyte that completely dissociates:
[F-]initial = [LiF] = 0.0750 M

Using the Ksp expression and the stoichiometry of the dissolution reaction, we can calculate the concentration of Ba2+ ions and F- ions at equilibrium:
Ksp = [Ba2+][F-]^2
[F-]eq = sqrt(Ksp/[Ba2+]) = sqrt(2.45×10−5/1) = 0.00495 M
[Ba2+]eq = Ksp/[F-]^2 = 2.45×10−5/(0.00495)^2 = 9.28×10−4 M

Therefore, the molar solubility of BaF2 in a solution containing 0.0750 M LiF is 9.28×10−4 M.

Visit here to learn more about molar solubility brainly.com/question/3191940
#SPJ11

According to  Boyle's law, if  the pressure of a gas increases, but temperature and number stay constant, then the volume of the gas must decrease.

Boyle's law is defined as  an experimental gas law which describes how the pressure of the gas decreases when  the volume increases. It's statement can be stated as, the absolute pressure which is exerted by a given mass of an ideal gas is inversely proportional to its volume provided temperature and amount of gas remains constant.

Mathematically, it can be stated as,

P∝1/V or PV=K. The equation states that the product of of pressure and volume is constant for a given mass of gas and the equation holds true as long as temperature is  constant.

Learn more about Boyle's law,here:

https://brainly.com/question/1437490

#SPJ1

The frequency of green light wave that has a wavelength of 5.7 x 10⁻⁷meters is 175.4×10⁴ per meter.

Wavelength is the distance between identical points (adjacent crests) in the adjacent cycles of a waveform signal propagated in space or along a wire. In wireless systems, this length is usually specified in meters (m), centimeters (cm) or millimeters (mm).

Wavelength is inversely related to frequency, which refers to the number of wave cycles per second. The higher the frequency of the signal, the shorter the wavelength.Thus, frequency=1/wavelength=1/5.7×10⁻⁷=175.4×10⁴ m⁻¹.

Learn more about wavelength,here:

https://brainly.com/question/13533093

#SPJ1