Answer:
The mean of these numbers is 15.68816 with a repeating 6.
Step-by-step explanation:
Land surveyors outlined a park as shown. What is the area of the park?
la cuadra se llama 6minutos
Using the applet, explore the results for simulating a group of 30 people and noting whether there is a duplicated birthday (whether at least two people have a matching birthday). Run at least 40 trials. What is the relative frequency of trials that had at least two people with the same birthday
Answer:I just need points
Step-by-step explanation:
Hey
PLEASE I NEED HELP RIGHT NOW
Select the graph that correctly translates ƒ(x) = |x| 4 units in the negative x-direction and 3 units in the positive y-direction.
answers are the pictures
Answer:
The third graph
Step-by-step explanation:
What the translation is saying is that for each value of f(x) = |x|, the graph is translated 4 units in the negative x direction and 3 units for the positive y direction. Another way to say this is that for each f(x), we can add (-4) (or subtract 4) to its x value and add 3 to its y value.
One way to find which graph works is to take a point, figure out where it should be, and work from there.
One example of this is (-1,1). If x=-1, |x| is 1, so in the original graph, our point is (-1, 1). In our translated graph, we need to subtract 4 from the x component (the first number, which is -1 in this case) and add 3 to the y component (the second number, or 1 in this case). Our new point comes to
(-1-4 , 1+3)
= (-5, 4)
Therefore, one point on the resulting graph is (-5, 4). We can look through each graph and see if it has the point.
Looking at each graph, it is clear that the graph in the bottom left, or the third graph, contains the point.
The equation of the translated function will be f(x) = |x + 4| + 3. Then the correct option is C.
What is an absolute function?The absolute function is also known as the mode function. The value of the absolute function is always positive.
The absolute function is given as
f(x) = | x – h | + k
The function is given below.
f(x) = |x|
Then the function is translated 4 units in the negative x-direction and 3 units in the positive y-direction. Then the vertex will be at (-4, 3). Then the equation of the function will be
f(x) = |x + 4| + 3
Then the graph is given below.
Then the correct option is C.
More about the absolute function link is given below.
https://brainly.com/question/10664936
#SPJ2
The answer to this question please.
Answer:
Part A) y=1,100x + 4,500
Part B) 14,400
Step-by-step explanation:
Part A)
There is a base fee of $4,500, meaning that the line begins at y=4500 (i.e. The y-intercept is [0,4500], so 'b' in y=mx+b is 4,500). There is a $1,100 hourly rate, which is proportional to the value of x, the amount of hours filmed. Therefore, 'm' in y=mx+b is $1,100.
Thus, the final equation looks like:
y= 1,100x + 4,500
Part B)
x=9
y=1,100x+4,500
y=1,100(9)+4,500
y=9,900+4,500
y=14,400
find the missing side length in the image below
Let missing side be x
Using basic proportionality theorem
[tex]\\ \sf\longmapsto \dfrac{18}{14}=\dfrac{27}{x}[/tex]
[tex]\\ \sf\longmapsto \dfrac{9}{7}=\dfrac{27}{x}[/tex]
[tex]\\ \sf\longmapsto 9x=7(27)[/tex]
[tex]\\ \sf\longmapsto x=\dfrac{7(27)}{9}[/tex]
[tex]\\ \sf\longmapsto x=21[/tex]
What is the equation
Answer:
y=3x+1
Step-by-step explanation:
Determine slope with two coordinates and use it in the formula
Simplify: –3(y + 2)2 – 5 + 6y.
Answer:
-17
Step-by-step explanation:
–3(y + 2)2 – 5 + 6y
(–3y -6)2 – 5 + 6y
-6y -12 - 5 + 6y
-17
A force of 18 lb is required to hold a spring stretched 8 in. beyond its natural length. How much work W is done in stretching it from its natural length to 10 in. beyond its natural length
Answer: 18.75 lb.ft
Step-by-step explanation:
Given
Force required to stretch spring 8 in. is 18 lb
it can be written
[tex]\Rightarrow F=kx\\\Rightarrow 18=k(8)\\\\\Rightarrow k=\dfrac{18}{8}=\dfrac{9}{2}\ lb/in.[/tex]
Work done in stretching from its natural length to 10 in.
[tex]\Rightarrow W=\dfrac{1}{2}kx^2\\\\\Rightarrow W=0.5\times \dfrac{9}{2}\times (10)^2\\\\\Rightarrow W=225\ lb.in.\ or\\\Rightarrow W=18.75\ lb.ft[/tex]
Researchers wanting to assess skin irritation associated with a new sunscreen developed for those with photosensitivity. They randomly sample 240 men with a history of photosensitivity and 240 men without a history of photosensitivity and ask them to apply the cream and report the level of skin irritation they experience after spending 20 minutes in the sun using a scale of 0-10. The average skin irritation score for the group with a history photosensitivity was 1.2 and the average skin irritation score for the group without a history of photosensitivity was 1.4. The Levene's test for equality of variances had a p value of 0.08. You know this means:
A. The researchers should report the t test results assuming equal variances. Select The researchers should report the t test results NOT assuming equal variances. as your answer
B. The researchers should report the t test results NOT assuming equal variances.
C. The researchers should reject the null hypothesis and report there is a difference in the average skin irritation score.
D. The researchers should fail to reject the null hypothesis and conclude there is NOT a difference in the average skin irritation score.
Answer:
Blablabka
Step-by-step explanation:
Blablabla
The slide is inclined at an angle of 52.0°. Danny weighs 46.0 pounds. He is sitting in a cardboard box
with a piece of wax paper on the bottom. Stacey is at the top of the slide holding on to the cardboard
box. Find the magnitude of the force Stacey must pull with, in order to keep Danny from sliding down
the slide. (We are assuming that the wax paper makes the slide into a frictionless surface, so that the
only force keeping Danny from sliding is the force with which Stacey pulls.)
Answer:
Step-by-step explanation:
Since the slide is inclined at an angle of 52.0° to the horizontal, Danny's weight (mass, m) of 46.0 pounds has a component W = mgcos52.0° perpendicular to the incline and W' = mgsin52.0° parallel to the incline where g = acceleration due to gravity = 32 ft/s²
The perpendicular component of Danny's weight is the normal force to the incline. This normal force would determine the magnitude of the friction along the incline.
Since the wax paper makes the incline surface frictionless, so, there is no friction along the surface and thus the only horizontal force acting along the surface is the component of Danny's weight along the surface.
For Stacey to keep Danny from sliding down along the incline, the force she applies along the incline, F must be equal to the component of Danny's weight along the incline.
So, F = W'
F = mgsin52.0°
F = 46lb × 32 ft/s² × sin52°
F = 1472 lb-ft/s² 0.7880
F = 1159.95 lb-f
F ≅ 1160 lb-f
Mr. Montes is writing a short, three-question, true or false quiz for his Algebra 2 classes. He had planned on using a random answer generator to determine which of true or false would be the correct answer for each quiz question, but his internet is not working. Instead, he writes each possible answer combination on a small slip of paper, folds each paper in half, and then places them in a box. Without looking, he draws one of the slips of paper.
Use what you know about counting methods and set operations to answer the following questions.
After grading the quizzes, Mr. Montes decides that his students could use some additional practice with the concepts tested. He writes a take-home assignment for his students. The assignment starts with two true or false questions and then has 3 multiple choice questions. The multiple choice questions each have 4 answer options, only 1 of which is correct. Luckily, Mr. Montes’ internet is working when he writes the quiz and he is able to use a random answer generator.
After grading the take-home assignments, Mr. Montes randomly selects 5 take-home assignments to analyze. He considers the student’s responses to the three multiple choice questions, which are as shown.
Student 1: Student 2: Student 3: Student 4: Student 5:
{C, A, C} {C, B, B} {C, B, C} {C, B, A} {C, A, A}
Amisha was too tired to work on the take home assignment Mr. Montes gave her, so she randomly selected answers without reading any of the questions. Suppose that you wanted to find the odds that Amisha answered at least 3 of the 5 questions correctly. Do you think you would use a permutation or a combination?
1. The correct responses for the multiple choice questions are, in order, C, B, and A. If Set 1 represents the subset of these students who answered C for number 1, Set 2 represents the subset of these students who answered B for number 2, and Set 3 represents the subset of students who answered A for number 3, find each of the following. Explain what each notation means in context of this scenario.
a. Set 1 ∩ Set 2
b. Set 2 ∪ Set 3
c. The complement of Set 1
2. Amisha was too tired to work on the take home assignment Mr. Montes gave her, so she randomly selected answers without reading any of the questions. Suppose that you wanted to find the odds that Amisha answered at least 3 of the 5 questions correctly. Do you think you would use a permutation or a combination?
Answer:
There are 4 questions to answer here and the answers are given below:
1. COMBINATION
2. SET 2
3. {S2, S3, S4, S5}
4. { } OR ∅
Step-by-step explanation:
The key topics here are PERMUTATION & COMBINATION and SETS & VENN DIAGRAMS.
The assignment has 5 questions in all. The options for each question are listed below and separated by commas:
1. True, False
2. True, False
3. A, B, C, D
4. A, B, C, D
5. A, B, C, D
Mr. Montes derives his answers from a random answer generator; same way Amisha generated her answers by random selection.
QUESTION 1
If you want to find the odds that Amisha got at least 3/5 of the answers correctly, would you use a permutation or a combination?
ANSWER TO QUESTION 1
You would use a combination. Note that as much as 'permutation' is distinctly defined from 'combination', in many complex cases both are used to derive the solution. In this case though, a combination is used. For each of the 5 questions, there are a number of possible answers. Questions 1 and 2 have only two possible answers (also known as options) while questions 3, 4 and 5 have four possible answers/options to choose from. Amisha can only have one set of five answers; each to each question. So this is a combination! If you want to find the odds that Amisha got at least 3 of her 5 answers correct, you would use a combination of the various possible answers to check.
QUESTION 2
Find "Set 1 ∩ Set 2" and explain the notation in the sentence.
ANSWER TO QUESTION 2
First list out relevant information:
- The correct answers to questions 3, 4 and 5 are respectively C, B, A
- The universal set consists of five students: S1, S2, S3, S4, S5 hence
Ц = {S1, S2, S3, S4, S5}
Next, enlist the elements of each defined set
Set 1: {S1, S2, S3, S4, S5} Set 2: {S2, S3, S4} Set 3: {S4, S5}
Note: Set 1 is equal to the universal set.
Now this notation "∩" means "intersect". It requires an action - checking out which elements in one set also appear in a second set and then bringing those elements to form a new set.
In the case of this question, we're to find Set 1 intersect Set 2. The elements present in Set 1 and also present in Set 2 are {S2, S3, S4}.
If you look closely, you'll observe that these are the same elements in Set 2! This brings to remembrance, one of the laws of sets:
The intersect of any subset and the universal set (recall that Set 1 happens to be equal to or have the same elements as the universal set) is equal to that subset.
So the answer to question 2 is
Set 1 ∩ Set 2 = Set 2
QUESTION 3
Find "Set 2 ∪ Set 3" and explain the notation in the sentence.
ANSWER TO QUESTION 3
The notation ∪ represents "union". This is the act of putting together the elements in two sets, to form a new set. In this activity, if an element appears in both sets, it is only written once in the new set, not twice.
So, Set 2 union Set 3 = {S2, S3, S4, S5}
As earlier stated, Student 4 isn't appearing twice in the new set.
QUESTION 4
Find the ' of Set 1 and explain the notation in this sentence.
ANSWER TO QUESTION 4
The symbol ' means "complement of a set". Finding the complement of a set is like subtracting the elements of that set from the universal set.
Since Set 1 contains the same elements as the universal set, subtracting Set 1 from the universal set will give you nothing. In this case, the complement of Set 1 is a null set!
Set 1 ' Ц = { } or ∅
where the empty bracket symbol and the slashed zero symbol represent null set.
Kudos!
z/3 - 4(z-1) = 5(z-2)+1
What is the value of z?
Answer: [tex]\frac{3}{2}[/tex]
Step-by-step explanation:
First, we need to open the brackets on either side of the equation.
[tex]\frac{z}3}[/tex] - 4z+4 = 5z-10+1
After opening the brackets, we need to separate the variables from the constants.
[tex]\frac{z}{3}[/tex] -4z-5z = -10+1-4
Then we need to convert the variable fraction into a normal variable by multiplying the variable fraction and also all other terms in the equation.
3([tex]\frac{z}{3}[/tex]) 3(-4z) 3(-5z) = 3(-10) + 3(1) + 3(-4)
z -12z -15z = -30+3-12
Now, we can simplify the equation !
-26z = -39
z = -39÷-26
= [tex]\frac{3}{2}[/tex]
find r and s on the triangle
Answer:
r=24
s=21
Step-by-step explanation:
I use proportion of 2 to 3
I multiply 16 and 3/2 to get r
r=24
I multiply 14 and 3/2 to get s
s=21
What is the five-number summary for this data set? 22, 29, 33, 38, 44, 47, 51, 56, 64, 69 Assume the numbers in each answer choice are listed in this order: min, Q1, median, Q3, max.
A. 22, 33, 45.5, 56, 69
B. 22, 38, 45.5, 51, 69
C. 22, 38, 41, 51, 69
D. 22, 33, 41, 56, 69
Answer: A: 22, 33, 45.5, 56, 59
Step-by-step explanation:
The minimum is the lowest number in the data, in this case, it was 22.
Q1 is the median of the lower quartile range, anything below the median of the overall data.
Median, the middle number in the overall data. You first need to put them from lowest to highest (numerical order). After that, I find it a lot easier to cross one from each side until I'm either left with one or two. If I'm left with one, then that is my median for the overall data set. If I'm left with two, then I simply need to add both the numbers together and divide it by 2. Typically if it is a whole number, and the numbers are 1 number value away from each other, it is usually just 0.5 more of the lower value of the two. (For example, the two numbers I come down to is 10 and 11. The median would be 10.5).
Q3 is the exact same principle as Q1 just on the upper quartile range. Just repeat what you did in Q1 but for the numbers above the overall median of the data set.
Maximum is the highest number in the data set, in this case, it was 69.
Hope this helps!
write the expression as a trinomial (5c+2)(2c-1)
Answer:
10c^2-c-2
Step-by-step explanation:
FOIL method
or just multiply all of the numbers by each other, if you get 4 numbers you did it right then simplify;
(5c+2)(2c-1) 5c*2c; 2*-1; -1*5c; 2*2c = 10c^2, -2, -5c, 4c, simplify, 10c^2 -c -2. Hope this helps :)
Answer:
10c² - c - 2
Step-by-step explanation:
(5c+2)(2c-1)
10c² - 5c + 4c - 2
10c² - c - 2
Find the area of the circle. Use 3.14 for it. E d = 10 cm A = [?] cm2 A=7tr2
Answer:
A=(78.5)cm²
Step-by-step explanation:
d=10
r=10/2=5
A=πr²
A=3.14*5²
A=3.14*25
A=78.5cm²
Answer: d=10cm
According to the formula i.e. A=πr²
first we need 'r'
as r=d/2
hence, r= 10cm/2
r=5cm
put r=5 in formula
=3.14(5cm)²
=3.14×25cm²
=78.5cm²
60kg of rice must be put into three equal bags. what weight of rice must be put into each bag?
Answer:
20kg of rice in each bag
Step-by-step explanation:
we have 60kg of rice and 3 bags. we know that we need to have an eqal amount of rice in each bag so we can divide the 60kgs of rice by 3.
60÷3=20
Checking our Answer:
we can check our work by doing the opposite of division which is multiplication. to check our work we'd have to multiply the dividend (in our case 3) and our quotient (in our case 20) to see if we get the larger dividend (in our case 60) as our answer.
3×20=60
A random sample of bolts is taken from inventory, and their lengths are measured. The average length in the sample is 5.3 inches with a standard deviation of .2 inches. The sample size was 50. The point estimate for the mean length of all bolts in inventory is
Answer:
[tex]L_x=5.3 inches[/tex]
Step-by-step explanation:
Average length [tex]\=x =5.3 inches[/tex]
Standard deviation [tex]\sigma=0.2 inches[/tex]
Sample size [tex]n=50[/tex]
Generally The point estimate for the mean length of all bolts in inventory is
[tex]L_x= \=x[/tex]
[tex]L_x=5.3 inches[/tex]
Find the midpoint of the segment between the points (17, 1) and (-2,8)
a. (15, 9)
b. (-15,-9)
c. (19/2, -7/2)
d. (15/2, 9/2)
Answer:
Option d
Step-by-step explanation:
(17+(-2))/2 , (8+1)/2
which is,
15/2, 9/2
Answered by GAUTHMATH
15 times a certain number plus 5 times the same number is 80 what is the number
x = 4
Every step shown. Once you become used to doing this you will almost be able to do the basic one's in your head without writing much down.
Explanation:
Let the unknown value be
x
Converting the words into numbers:
First part: "15 times a certain number" → 15 x
Second part: "plus 5 times the same number" → 15 x + 5 x
The last part: " is 80" -> 15x + 5 x = 80
We are counting x ' s . 15 of them plus another 5 of them gives a total of 20.
So 15 x + 5 x = 20 x = 80
Divide both sides by 20
20 x ÷ 20 = 80÷ 20
20/20x=80/20
x=4
Let the number be x
ATQ
[tex]\\ \sf\longmapsto 15x+5x=80[/tex]
[tex]\\ \sf\longmapsto (15+5)x=80[/tex]
[tex]\\ \sf\longmapsto 20x=80[/tex]
[tex]\\ \sf\longmapsto x=\dfrac{80}{20}[/tex]
[tex]\\ \sf\longmapsto x=4[/tex]
How much more area does a large pizza with a 12 in. diameter have than a small pizza with an 8 in. diameter? Round your answer to the nearest square inch.
Answer: About 63 in²
Step-by-step explanation:
Area of circle = π · r²
r = radius lengthπ ≈ 3.14Area of large pizza:
[tex]\pi *r^{2} =3.14*6^{2} =3.14*36=113.04[/tex]
Area of small pizza:
[tex]\pi *r^{2} =3.14*4^{2} =3.14*16=50.24[/tex]
Difference in area:
[tex]113.04-50.24=62.8[/tex]
WILL MARK BRAINLYST!!! Enter the correct answer in the box. Write your answer in the form y=mx+ b, using the appropriate inequality symbol in place of the equal sign.
What inequality is shown in the graph?
Answer:
The inequality shown in the graphic is [tex]y > 4x + 1[/tex]
Step-by-step explanation:
Equation of a line:
The equation of a line is given by:
[tex]y = mx + b[/tex]
In which m is the slope and b is the y-intercept(value of y when x = 0).
Inequality:
Values greater than the dashed line, dashed so the line is not part of the inequality, thus, the inequality is:
[tex]y > mx + b[/tex]
Dashed line:
The dashed line goes through (0,1) and (1,5).
Point (0,1) means that when [tex]x = 0, y = 1[/tex], so [tex]b = 1[/tex], and:
[tex]y > mx + 1[/tex]
Finding the slope:
When we have two points, the slope is given by the change in y divided by the change in x. In this question, we have point (0,1) and (1,5), so:
Change in y: 5 - 1 = 4
Change in x: 1 - 0 = 1
Slope: [tex]m = \frac{4}{1} = 4[/tex]
What inequality is shown in the graph?
[tex]y > 4x + 1[/tex]
In an accelerated failure test, components are operated under extreme conditions so that a substantial number will fail in a rather short time. In such a test involving two types of microchips, 580 chips manufactured by an existing process were tested, and 125 of them failed. Then, 780 chips manufactured by a new process were tested, and 130 of them failed. Find a 90% confidence interval for the difference between the proportions of failures for chips manufactured by the two processes. (Round the final answers to four decimal places.) The 90% confidence interval is
Answer:
The 90% confidence interval is (0.0131, 0.0845).
Step-by-step explanation:
Before finding the confidence interval, we need to understand the central limit theorem and subtraction of normal variables.
Central Limit Theorem
The Central Limit Theorem establishes that, for a normally distributed random variable X, with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the sampling distribution of the sample means with size n can be approximated to a normal distribution with mean [tex]\mu[/tex] and standard deviation [tex]s = \frac{\sigma}{\sqrt{n}}[/tex].
For a skewed variable, the Central Limit Theorem can also be applied, as long as n is at least 30.
For a proportion p in a sample of size n, the sampling distribution of the sample proportion will be approximately normal with mean [tex]\mu = p[/tex] and standard deviation [tex]s = \sqrt{\frac{p(1-p)}{n}}[/tex]
Subtraction between normal variables:
When two normal variables are subtracted, the mean is the difference of the means, while the standard deviation is the square root of the sum of the variances.
Old process:
125 out of 580, so:
[tex]p_O = \frac{125}{580} = 0.2155[/tex]
[tex]s_O = \sqrt{\frac{0.2155*0.7845}{580}} = 0.0171[/tex]
New process:
130 out of 780. So
[tex]p_N = \frac{130}{780} = 0.1667[/tex]
[tex]s_N = \sqrt{\frac{0.1667*0.8333}{780}} = 0.0133[/tex]
Distribution of the difference:
[tex]p = p_O - p_N = 0.2155 - 0.1667 = 0.0488[/tex]
[tex]s = \sqrt{s_O^2+s_N^2} = \sqrt{0.0171^2 + 0.0133^2} = 0.0217[/tex]
Confidence interval:
[tex]p \pm zs[/tex]
In which
z is the z-score that has a p-value of [tex]1 - \frac{\alpha}{2}[/tex].
90% confidence level
So [tex]\alpha = 0.1[/tex], z is the value of Z that has a p-value of [tex]1 - \frac{0.1}{2} = 0.95[/tex], so [tex]Z = 1.645[/tex].
The lower bound of the interval is:
[tex]p - zs = 0.0488 - 1.645*0.0217 = 0.0131[/tex]
The upper bound of the interval is:
[tex]p + zs = 0.0488 + 1.645*0.0217 = 0.0845[/tex]
The 90% confidence interval is (0.0131, 0.0845).
help asap pleaseeee asap
Which two shapes make up the digital camera below?
Rectangular prism and cylinder make up a camera.
What is rectangular prism and cylinder?A cube is a rectangular prism with all of its sides being the same length, a triangular prism has a triangle as its base, and a rectangular prism has a rectangle as its foundation. Another form of right prism that has a circle as its basis is a cylinder.
A rectangular prism includes a total of 6 faces, 12 sides, and eight vertices. Like a cuboid, it contains three dimensions- the base width, the height, and the length. The top and base of the rectangular prism exist rectangular. The pairs of opposite faces of a rectangular prism exist as identical or congruent.
A cylinder contains traditionally been a three-dimensional solid, one of the most essential curvilinear geometric shapes. Geometrically, it includes been regarded as a prism with a circle as its base.
Hence, Rectangular prism and cylinder make up a camera.
To learn more about rectangular prisms and cylinders refer to:
https://brainly.com/question/15594686
#SPJ2
We are again studying the times required to solve two elementary math problems. Suppose we ask four students to attempt both Problem A and Problem B. Assume the students are independent and all results are normally distributed, but note that a particular student's times on the two questions are likely to be positively correlated. The results are presented below (in seconds).
student Problem A Problem B
1 20 35 2 30 40 2 3 15 20 4 40 50
Again find a two-sided 95% CI for the difference in the means of A and B.
Answer:
(-16.494 ; -3.506)
Step-by-step explanation:
student Prob A Prob B difference, d (A-B)
1 20 35____ - 15
2 30 40 ___ - 10
3 15 20 ___ - 5
4 40 50 __ - 10
Difference, d = -15, -10, -5, -10
Xd = Σd/ n = - 40 / 4 = - 10
Standard deviation of d ; Sd = 4.082
The confidence interval for the difference is given as :
Xd ± Tcritical*(Sd/√n)
Tcritical at 95%; df = n - 1 ; 4 - 1 = 3
Tcritical(0.05, 3)). = 3.182
C.I = -10 ± 3.182(4.082/√4)
C.I = -10 ± 6.494462
C. I = (-16.494 ; -3.506)
g A control group of 14 vehicles using regular gasoline showed mean CO2 emissions of 679 pounds per 1000 miles with a standard deviation of 15 pounds. At α = 0.05, in a left-tailed test (assuming equal variances) the test statistic is: Group of answer choices
Answer:
0.236
Step-by-step explanation:
Given :
x1 = 667 ; n1 = 10 s1 = 20
x2 = 679 ; n2 = 14 s2 = 15
Test statistic :
(x1 - x2) / √[Sp² (1/n1 + 1/n2)]
The pooled Variance, Sp² :
Sp² = [(n1 - 1)s1² + (n2 - 1)s2²] / (n1 + n2 - 2)
Sp² = [(9*20²) + (13*15²)] / (10+14-2)
Sp² = 6525 / 22 = 296.59
T = (667 - 679) / √(296.59*(1/10 + 1/14)
T = -12 / 50.844
T = 0.236
Test statistic = 0.236
Find the perimeter of the figure below, in inches
Answer:the perimeter is 200.4
Step-by-step explanation: I got this answer by separating the shape into multiple pieces then I added it all together.
For the z test, the critical region for rejection of H0 _________. Group of answer choices depends on N is determined only by alpha and N allows us to accept the null hypothesis is determined only by alpha
Answer:
allows us to accept the null hypothesis
Explanation:
The z test(in a normal distribution) score for the critical region determines whether we reject the null hypothesis(H0) or accept the null hypothesis(reject or fail to reject the null hypothesis). If we fail to reject the null hypothesis, then we have accepted the alternative hypothesis (H1). The critical region rejection for z test is calculated using alpha and z score, if z score is greater or less than alpha(positive or negative), we reject the null hypothesis.
Which type of triangle will always have at least 1-fold reflectional symmetry?
right triangle
obtuse triangle
acute triangle
isosceles triangle
Answer:
D. isosceles triangle
Step-by-step explanation:
Ed22
A triangle with at least 1-fold reflectional symmetry is isosceles triangle, option D is correct.
What is Triangle?A triangle is a three-sided polygon that consists of three edges and three vertices.
An isosceles triangle will always have at least 1-fold reflectional symmetry.
This is because an isosceles triangle has two congruent sides and two congruent angles.
If we draw a perpendicular bisector of the base (the side that is not congruent), it will bisect the base and the angle opposite to the base.
This means that the triangle is symmetric with respect to this line of reflection, which is the line of symmetry.
Therefore, the correct answer is isosceles triangle.
To learn more on Triangles click:
https://brainly.com/question/2773823
#SPJ5
