five (5) muscular injuries and disease​

Answer:

Only chemical equation uses arrow instead of = sign

Answer:

Only chemical equation uses an arrow instead of a = sign.

A chemical equation depicts a chemical reaction by utilising chemical formulae and symbols to depict the reactants, products, and chemical changes that take place. In a chemical equation, the arrow indicates the direction of the reaction and is commonly depicted as a single arrow pointing from the reactants to the products. In contrast, the equals sign (=) is commonly used in mathematical equations to indicate that two expressions have the same value.

While numbers are used to indicate the relative proportions of reactants and products and minus signs are used to indicate reactants or products in the form of ions, the arrow is the most distinguishing feature that distinguishes chemical equations from mathematical equations.

Answer:

A. Producing certain synthetic materials could have a greater environmental impact than disposing of them.

Explanation

I just did this question and got it right.

Answer:

The bond between Phosphorus and Chlorine in PCl3 is covalent as chlorine needs one electron and phosphorus has metallic character and easily donate electron

Answer:

sugar and salt, as they can dissolve in water. Sugar and salt have a high solubility in water. So, sugar and salt can form a solution with water.

Explanation:

Answer:

    2H2    +   1 O2   ------>    2H2O

m = 12.7g                              m = ?

Get the number of moles for Hydrogen gas (H2) by dividing the mass by the molar mass (1.01g/mol as listed in the periodic table for its atomic mass)

12.7/1.01 = 12.57 mol of H2

Now use the mole to mole ratio of Hydrogen gas (H2) and water (H2O).

From the balanced equation, we can see that 2 mol of H2 gives us 2 mol of H2O. Since both of the ratios are equal (2:2), the moles we have for hydrogen gas is the same as the moles we get for water.

12.57 mol of H2O

Now that we have the amount of mol for H2O produced in this reaction, we can convert it to grams by multiplying the moles by the molar mass.

Molar mass of H2O = (1.01 x 2) + (16) = 18.02g/mol

12.57 x 18.02 = 226.5g (rounded)

Therefore 226.5g of water will be produced in this reaction

According to law of conservation of mass and stoichiometry, 114.3 g of water are produced if 12.7 grams of hydrogen reacted with an unknown amount of oxygen.

According to law of conservation of mass, it is evident that mass is neither created nor destroyed rather it is restored at the end of a chemical reaction .

Law of conservation of mass and energy are related as mass and energy are directly proportional which is indicated by the equation E=mc².Concept of conservation of mass is widely used in field of chemistry, fluid dynamics.

2 H₂ + O₂[tex]\rightarrow[/tex] 2 H₂O,according to this equation,4 g hydrogen reacts with 32 g oxygen to give 36 g water, thus 12.7 g of hydrogen will produce 12.7×36/4=114.3 g water and hence for this amount of water to be formed  12.7 g of hydrogen reacts with 101.6 g of oxygen which is obtained as 114.3-12.7=101.6 g

Thus, 114.3 g of water is produced.

Learn more about law of conservation of mass,here:

https://brainly.com/question/28711001

#SPJ2

Answer:

Dilute the sample

Explanation:

The statement is not entirely accurate. The Bradford assay is commonly used to determine protein concentrations in a sample.

However, it is true that the Bradford assay is more accurate and reliable for measuring protein concentrations at low to moderate levels rather than at very high concentrations.

The Bradford assay is based on the binding of Coomassie Brilliant Blue dye to proteins. The dye undergoes a color change from brown to blue when bound to proteins, allowing for the measurement of protein concentrations. At low protein concentrations, the binding of the dye to proteins is well-calibrated and results in a linear relationship between protein concentration and color intensity, making it suitable for accurate quantification.

At high protein concentrations, the binding capacity of the dye may become saturated, leading to non-linear and less accurate measurements. The excess protein can also cause interference and affect color development. In such cases, dilution or alternative protein quantification methods may be more suitable, such as the BCA assay or the Lowry assay.

Therefore, while the Bradford assay can be used to measure protein concentrations across a range of concentrations, it is generally more reliable for low to moderate protein concentrations.

Learn more about proteins here:

https://brainly.com/question/30986280

#SPJ 6

Answer:

hello

Explanation:

Answer:

How Does a Solar Panel Generate Power? Solar panels use the photons produced by sunlight to generate direct current (DC) electricity. When the photons hit the panel they are absorbed by the panel's semiconducting silicon material.

Explanation:

Answer:

Solar panels produce electrical energy by absorbing the solar energy from the sun and converting it into electrical energy.

Explanation:

Once I told a chemistry joke

I got no reaction.

What do you do with a sick chemistry teacher?

If you can't helium, and can't curium, you might as well barium.

I don't trust atoms,

I heard they make up everything

Hope I helped make ur day. :)

Answer:

b

Explanation:

it is b because it has 4 spots and that would be 3 zeros so it is to the 3rd power

Answer:

2.409*10^24

Explanation:

If I am not mistaken you are supposed to do 4*6.022*10^23. This will allow for it to be converted.

I hope this helped

Please provide more of the question so I am able to answer, but I do know that H20 has 0 calories.

NaCl - Chlorine has an outer shell with 7 electrons it wants to gain from the Sodium to become stable, whereas the Sodium wants to lose an electron to become stable.

Answer:

The ideal gas law specifies the mechanical behavior of ideal gases. It is capable of calculating the volume of gases produced or consumed.

In chemical equations, these equations are widely used to convert between volumes and molar quantities.

Use ideal gas law

Therefore

is the same for both So, = same for both.

When n increases, T decreases, so, n is 1 for and 0.5 for , implying that is hotter.

The temperatures of the gases will not be equal.

[tex]PV=nRT[/tex]

∵V is the same for both

∴T= same for both.

When n increases, T decreases, so, n is 1 for hydrogen gas and 0.5 for  oxygen gas ,implying that oxygen gas will have more temperature than hydrogen gas since its number of moles are lower than hydrogen gas.

Learn more:

brainly.com/question/1063475

Answer:

Kinetic Molecular Theory states that gas particles are in constant motion and exhibit perfectly elastic collisions. Kinetic Molecular Theory can be used to explain both Charles' and Boyle's Laws. The average kinetic energy of a collection of gas particles is directly proportional to absolute temperature only.

Explanation:

hope this helps! goodluck & enjoy the rest of ur day or night.

Answer: photosphere.

Explanation:

The part of the Sun commonly called its surface is the photosphere. The word photosphere means "light sphere" – which is apt because this is the layer that emits the most visible light. It’s what we see from Earth with our eyes.

Answer:

The atomic number of Chlorine(Cl) is 17 and the electronic configuration is 2,8,7 with seven electrons in the valence shell.

Hope that helps. x

Answer:

See below

Explanation:

Chlorine has 17 electrons in it's shell.

(See the attached file to get the idea of what subshell would be filled first).

The accommodations:

s = 2 electrons

p = 6 electrons

d = 10 electrons

f = 14 electrons

Now, the electronic configuration of chlorine:

1s²2s²2p⁶3s²3p⁵

(2+2+6+2+5 = 17 electrons)

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

100 Celsius mostly because water boils at sea level

Explanation:

Flipping a light switch to turn on a light means that the circuit with the light is being closed. When the switch is flipped the opposite way, to turn the light off, the circuit is being opened.

Answer:

You now have an open circuit

Explanation:

The circuit is closed when the switch is flipped the other way to turn off the light.

Answer:

Lustrous

Explanation:

Metals are lustrous which gives them a property of having Shiny surfaces

The valence electrons of metals jump easily to a higher energy orbital when light shines on them then they all fall emitting the excess energy as light show lustrous  property of metals.

Valence electrons are defined as a negatively charged particle that can be shared or transmitted between atoms that is found in the outermost shell of an atom. Valence electrons have a crucial role in determining how an atom will behave. The electrical configurations of elements can be used to find valence electrons. The total number of valence electrons in that element is then determined by counting the number of electrons in the outermost shell.

When newly treated, polished, or broken, a material takes on a bright look and conducts electricity and heat reasonably well. Metals are typically ductile and malleable. These traits are the result of the metallic bond that connects the atoms or molecules of the metal.

Thus, the valence electrons of metals jump easily to a higher energy orbital when light shines on them then they all fall emitting the excess energy as light show lustrous  property of metals.

To learn more about valence electrons, refer to the link below:

https://brainly.com/question/13993867

#SPJ2

Answer: B. The actual mechanical advantage of the ramp.

Explanation:

The professor saying that the ramp SHOULD have a mechanical advantage of 3 indicates that that would be the ideal mechanical advantage. Since Rubia calculated it to be 2.8, that means that it is the acutal mechanical advantage. The actual advantage will be reduced from the ieal due to things like friction.

Answer:

1031.084g

Explanation:

n=m/M

m=n(M)

m = (3.4mol)(303.26g/mol)

1031.084g

Hope that helps

Answer:

1031.08

Explanation:

You start with 3.4 moles and you know that 6.022 x 10 ^ 23 = 1 mole( Avogadro's Number), so you just multiply those 2 numbers and the moles will cancel leaving you with grams of Lead Sulfate.

The two ions present in the solution are:

1. Sodium ion, Na⁺

2. Hydroxide ion, OH¯

The correct answer to the question is the 3rd option. The sodium ion is positive, and the hydroxide ion is negative.

Ions are atoms or group of atoms which possess an electric charge.

Aqueous Sodium hydroxide, NaOH contains sodium ion and hydroxide ion.

The sodium ion is positive while the hydroxide ion is negative as illustrated below:

NaOH(aq) —> Na⁺(aq) + OH¯(aq)

From the illustration above, we can conclude that the correct answer to the question is the 3rd option. The sodium ion is positive, and the hydroxide ion is negative.

Please see attached photo for further details

Learn more: https://brainly.com/question/4414335