For Structure A what are the formal charges on atoms:
1 , 2 , and 3 ?
For Structure B what are the formal charges on atoms:
1 , 2 , and 3 ?
For Structure C what are the formal charges on atoms:
1 , 2 , and 3 ?

If the two substituents are on the same side of the double bond, the bond has a cis conformation. From the diagram below, B, D, and E only have the cis configuration.

If the two substituents are on the opposite sides of the double bond, the double bond has a trans configuration. In the context of chemistry, trans denotes that the functional groups (substituents) are on the same side of some plane, whereas cis implies that they are on the other (transverse) side. The same plane contains all six atoms. The cis isomer has two "X" and "Y" groups on the same side of the double bond. In the trans isomer, the "X" and "Y" groups are situated on opposite sides of the double bond. They do not interconvert because there is no rotation around the bond.

To learn more about isomers click here https://brainly.com/question/12796779

#SPJ4

complete question: which of the following compounds are drawn in the cis configuration? 1.D only 2. B only 3. B, D, and E only 4. A and B only

The maximum mass the micrograms of cadmium  the chemist could measure in this sample is 3 × 10⁻¹ micrograms.

The limit for cadmium = 4.00 μg/L

The μg is called as micrograms.

An analytical chemist receives the sample of the groundwater with measured volume  = 76.0 mL

The concentration expression is given as :

Concentration = mass / volume in L

where,

Mass = 4.00 μg

Volume = 0.076 L

Th mass is given as  :

Mass = concentration × volume

Mass = 4 × 0.076

Mass = 3 × 10⁻¹ micrograms

Thus, the mass of cadmium is 3 × 10⁻¹ micrograms.

To learn more about mass here

https://brainly.com/question/14266954

#SPJ4

The conjugate acid of a weak base, such as ammonia and an ammonium ion salt, can also be used to create buffers.

To learn more about buffers refer to:

https://brainly.com/question/4177791

#SPJ4

The mass of aluminum required to produce 4.72 L of hydrogen gas at  stp from the reaction 27g.

Explanation:

13+14 =27.

To learn more about Mass refer to:

https://brainly.com/question/19385703

#SPJ4

The  most probable values for the first four ionization energies of the aluminum are : IE₁ = 578 kJ/mol, IE₂ = 1817 kJ/mol, "IE₃ = 2745 kJ/mol", IE₄ = 11577 kJ/mol.

The ionization energy is the amount of the energy required to remove the electron from an atom. The electronic configuration of Al is given as :

Al electronic configuration = 1s² 2s² 2p⁶ 3s² 3p¹. The fourth ionization energy is comparatively high because the 2p subshell is fully filled and the energy required to remove the electron from the stable electronic configuration will be high. Therefore, the fourth ionization energy is high.

To learn more about ionization energy here

https://brainly.com/question/29629534

#SPJ4

For the question asked, the correct option is (D) i.e. 1.8 standard deviations higher in pH than the typical rainfall.

A z-score is a measure of how many standard deviations a particular data point lies from the mean of a normal distribution. If the pH of the rainwater after last week's storm has a z-score of 1.8, this means that the acidity of the rain was 1.8 standard deviations higher than the mean acidity of average rainfall. It is important to note that the pH scale is logarithmic, so a change of one unit in pH represents a ten-fold change in acidity. Therefore, a change of 1.8 units in pH represents a ten-fold change raised to the power of 1.8, which is a substantial increase in acidity.

To know more about pH please refer: https://brainly.com/question/29766400

#SPJ4

a. Solar Energy and the Cell. By connecting a photovoltaic solar panel to a hydrogen fuel cell, the following may be accomplished: Photovoltaic panels or mirrors are used to concentrate solar energy.

Solar radiation is used by photovoltaic panels to convert sunlight into electrical energy. This energy can be turned into electricity or stored as thermal energy in batteries. Solar cells, often known as photovoltaic cells, convert sunlight directly into electricity. The term photovoltaics (abbreviated PV) comes from the photovoltaic effect, which is the process of converting light (photons) to energy (voltage). Photovoltaic solar energy is a type of clean, sustainable energy that creates electricity via the use of solar radiation. It is based on the photoelectric effect, which happens when specific materials absorb photons (light particles) and release electrons, resulting in the photoelectric effect.

learn more about photovoltaic  here:

https://brainly.com/question/18417187

#SPJ4

Option C is the right response since a hydrogen bond is a specific type of dipole-dipole link. A hydrogen bond, also known as the intermolecular force, produces a particular type of dipole-dipole attraction (IMF).

when two electronegative atoms that are connected by hydrogen bond to a strongly electronegative atom are nearby, one of them having a lone pair of electrons. Intermolecular forces, or IMFs, exist between molecules. The phrase "intermolecular forces," or "IMF," refers to the attractive and repulsive forces that form between the molecules of a substance. Through the use of these forces, certain molecules of a substance communicate with one another. The attraction between two hydrogen atoms known as a hydrogen bond (or H-bond) in chemistry is primarily brought on by electrostatic forces (H)

Learn more about hydrogen bond here

https://brainly.com/question/21054466

#SPJ4

Following are the match-ups of different milkfats.

Whole milk (3.25% milk fat), reduced-fat milk (2%), low-fat milk (1%), and fat-free milk, sometimes known as skim milk, are the four main forms of milk that are readily available. Each one has 8 grammes of high-quality protein and 13 other necessary elements. The quantity of fat in each type of milk, expressed as a percentage of milkfat, varies. To display the milkfat at a glance, these percentages are mentioned on the box and via the various cap colours.

All milk, including fat-free, low-fat, organic, and lactose-free varieties, remains a naturally nutrient-rich, straightforward, and healthful food. However, the amount of milk fat does impact the number of calories and fat in each serving.

To learn more about Milkfat from given link

https://brainly.com/question/29942756

#SPJ4

Explanation:

Hydrogen bonding is a type of noncovalent interaction between molecules or within a molecule in which a hydrogen atom is attracted to a highly electronegative atom, such as nitrogen, oxygen, or fluorine. The bond is formed between the partial positive charge on the hydrogen atom and the partial negative charge on the other atom.

An example of hydrogen bonding is the interaction between the hydrogen atoms in the molecule of water, H2O. In the water molecule, each hydrogen atom is bonded to an oxygen atom. The oxygen atom is more electronegative than hydrogen, which means it has a stronger pull on the electrons in the bond. This creates a partial negative charge on the oxygen atom, and a partial positive charge on the hydrogen atoms. These partial charges allow for the formation of hydrogen bonds between the hydrogen atoms of one water molecule and the oxygen atoms of another water molecule. This is what gives water its unique properties, such as high boiling point, high surface tension, and high heat of vaporization.

To find the molecular formula of an unknown compound from mass percent data, you can follow these steps. determine the molar mass of the compound by adding up the molar masses of each element present in the compound, using the mass percent data as a guide.

To learn more about molecular formula refer:

brainly.com/question/15960587

#SPJ4

Answer:

Rewrite the equation in standard form.

C3H8 + 5O2 ==> 3CO2 + 4H2O.

2. Convert 8.5 x 10^22 molecules proper into molecules . Remember 1 mole contains 6.02 x 10^23 molecules.

3. Using the confficients in the balanced equation, convert moles propper to moles H2O.

4. Convert mols H2O to grams. g = moles x molar mass.

If you start with 0.75 moles of C₃H₈, you would produce 54 grams of H₂O.

Moles (mol) are a unit of measurement used to express the amount of a substance. One mole of a substance is defined as the amount of that substance that contains the same number of particles (atoms, molecules, or ions) as there are atoms in exactly 12 grams of carbon-12. This number is known as Avogadro's number, which is approximately 6.022 x 10²³ particles per mole.

The mole is used to relate the mass of a substance to its chemical formula and to perform stoichiometric calculations.

The balanced equation is:

C₃H₈ + 5O₂ → 3CO₂ + 4H₂O

From the equation, every 1 mole of C₃H₈, 4 moles of H₂O are produced.

Moles of H₂O = (0.75 moles C₃H₈) x (4 moles H₂O / 1 mole C₃H₈)

= 3 moles H₂O

Mass of H₂O = (3 moles H₂O) x (18 g/mol)

= 54 g

Learn more about Moles, here:

https://brainly.com/question/15209553

#SPJ6

Given that ether is a more polar solvent than n-alkanes, it is anticipated that it will be more competitive in interactions of the dipole-type and as a hydrogen-bond base.

To learn more about polar solvent refer to:

https://brainly.com/question/3184550

#SPJ4

In the field of chemistry known as stoichiometry, the goal is to ascertain the needed quantitative data by using relationships between the reactants and/or products of a chemical process.

The complete question is,

Suppose you set the initial masses so that both reactions result in PCl3. Describe how the laws of definite and definite obeyed in both of these chemical reactions.

To learn more about stoichiometry refer to:

https://brainly.com/question/14935523

#SPJ4

The products of the reaction as shown are silver chloride and potassium nitrate. option A

If we talk about a reaction we have to look at the kind of combination in which there is the mixture of two or more substance that can be able to interact in some ways and then give rise to a product that is different from the products that were combined.

Here in the case of what we have here there is the combination of the silver nitrate and the potassium chloride and the products of the double replacement reaction that we would get are the silver chloride and the potassium nitrate.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

The following is the right procedure to find out molecular formula of the compound these are steps:

Take the grams of carbon, hydrogen, and oxygen and use them to calculate the empirical formula of the chemical. To find n, multiply the given molecular mass by the empirical formula mass and then compute the formula mass for the empirical formula. The molecular formula is obtained by multiplying each of the empirical formula's subscripts by n.

Do the empirical formula's molar mass calculations. Molecular mass determined using the empirical formula divided by the molecular mass provided. Add the entire number that was generated in step 2 to each subscript. The molecular equation is now this.

The molecular formula is obtained by multiplying each of the empirical formula's subscripts by n.      

To learn more about molecular formula refer to:

brainly.com/question/26388921

#SPJ4

Based on the model of Neil Bohr, The C-C-C bond angle in benzene is 120 degree. This is because of resonance stabilized.

Based on the simplified model of benzene, C6H6, in which the six carbon atoms are arranged in a ring with alternate single and double bonds between them, the C-C-C bond angle is expected to be around 120 degrees. This is because the double bonds between the carbon atoms in benzene are considered to be "resonance stabilized", meaning that the electrons in the double bond are spread out over all six carbon atoms in the ring. This delocalization of electrons results in an increased stability for the compound, and it also causes the bond angles to be slightly smaller than the ideal bond angle of a tetrahedral carbon atom, which is 109.5 degrees. It's important to note that the bond angles in benzene are not exactly 120 degrees, but are intermediate between the angles expected for single (around 109.5 degrees) and double (around 180 degrees) carbon-carbon bonds, the exact bond angles of benzene are around 120.7 degrees, and this is a result of the pi-electron distribution in the ring.

To know more about benzene please refer: https://brainly.com/question/14525517

#SPJ4

The correct relationship between the three values will be the value for nitrogen is greater than that of P because N is smaller, but less than that of O because N has a smaller effective nuclear charge.

Electronegativity is the chemical property which describes the tendency of an atom or a functional group which attract electrons toward itself. The electronegativity of an atom will be affected by both its atomic number as well as the distance that its valence electrons reside from the charged nuclei.

The  electronegativity of phosphorus will be 2.19 is much less  electronegativity than to the nitrogen. The electronegativity of nitrogen will be 3.04. 4. Phosphorus will expand its valence shell to hold more than eight electrons, but nitrogen cannot.

To know more about electronegativity here

https://brainly.com/question/17762711

#SPJ4

F: All of the above. When using gloves as personal protective equipment, it is important to follow all of the procedures listed:

A) Wear gloves of a material known to be resistant to permeation by the substances in use,

B) Remove gloves before handling objects such as doorknobs, telephones, pens, and computer keyboards,

C) Decontaminate or wash gloves before removing them,

D) Inspect gloves for small holes or tears before use,

E) Replace gloves periodically, depending on the frequency of use.C: Should never be reused. Latex gloves should never be reused as they may have been contaminated and may not provide sufficient protection. It is recommended that gloves are changed frequently to ensure safety.

To learn more about personal protective equipment here:

https://brainly.com/question/17663098

#SPJ4

A solid that appears when aqueous naoh is added to an al3-containing solution; however, the solid dissolves as more naoh solution is added. due to the amphoteric nature of aluminium.

which allows it to react with both bases and acids. Aluminium ions are eager to accept two electrons because of how acidic they are. The chemical element aluminium, also known as aluminium in American and Canadian English, has an atomic number of 13 and the symbol Al. Aluminium is less dense than most common metals, with a density around one third that of steel. an electric charge Having a negative charge, an electron is a particle. The negative charge is 1.602 10-19 coulomb in magnitude. A proton's mass is 1/1837 that of an electron.

Learn more about  atomic number here

https://brainly.com/question/16858932

#SPJ4

It takes 8,350 joules of heat, or 2,000 calories, to melt 25 grams of ice.

Examples:

To melt 25 grammes of ice, how much heat, in Joules, is needed? The heat in calories is what?

334 J/g = 80 calories per gramme of food containing water.

Solution

Heat of fusion is specified in the problem. Not off the top of your head knowledge, this is not a number. Common values for the heat of fusion are listed in chemistry tables.

You will need the equation relating heat energy to mass and heat of fusion in order to tackle this issue:

When q = heat energy and m = mass, q = mHf.

The heat of fusion is Hf.

Since it is unaffected by a change in matter's condition, temperature is not a factor in the equation. Making sure you are using the appropriate units for the answer is crucial because the equation is quite simple.

Converting heat into Joules:

q = (25 g)x(334 J/g)

q = 8350 J

In terms of calories, it's equally simple to describe the heat:

q = m·ΔHf

q = (25g)x(80cal/g)

q = 2000 cal

Answer: It takes 8,350 joules of heat, or 2,000 calories, to melt 25 grammes of ice.

To Learn more About   joules of heat  Refer To:

https://brainly.com/question/25603269

#SPJ1

By -320 pM, we need to increase the source power. A fluorescent material begins to produce visible light when energy is absorbed as a result of the incidence of X-rays, light waves, and electrons.

When a substance generates electromagnetic waves inside the longer wavelength range and makes them visible to the human eye, it is a fascinating occurrence. Let's first define fluorescence in order to comprehend this. This allows the substance to gently transition from the partly excited state to the ground state. Fluorescence is the term for this phenomena.

Detection limit = 3 × noise / signal to noise ratio

Detection limit  = 3× 75 pM / 5 = 15 pM

Source power = (noise / desired detection limit)² × current source power

Source power = (15 pM / 75 pM)² ×500 pM

                      = 0.36 ×500 pM

                       = 180 pM

Source power= 180 pM - 500 pM =

                       =-320 pM

Therefore, -320 pM, we need to increase the source power.

To know more about fluorescence, here:

https://brainly.com/question/14742655

#SPJ1

The elements that have incomplete shells are Zinc (Z = 30), Argon (Z = 18).so, option (b) (c) is correct.

What is element ?

A crucial component of a whole. a simple substance that cannot be divided into smaller components or transformed into another substance is referred to as in chemistry. Atoms, which are made up of protons, neutrons, and electrons, are the building blocks of an element. One element has a fixed number of protons in each of its atoms.

What is shell?

An atom's outermost region, which surrounds the atomic nucleus, is known as the electron shell. It consists of a collection of atomic orbitals with the same value of the fundamental quantum number, n. One or more sublevels, or electron subshells, exist within electron shells.

Therefore, elements that have incomplete shells are Zinc (Z = 30), Argon (Z = 18).so, option (b) (c) is correct.

Learn more about elements from the given link.

https://brainly.com/question/6258301

#SPJ4

You should dispose of them as instructed on the safety data sheet (SDS).

Learn more about Safety data sheet refer to :

https://brainly.com/question/23694150

#SPJ4

A heterogenous mixture is composed of two or more types of matter that can be present in varying amounts.

Heterogenous mixtures is defined as a type of mixture where in the composition is not uniform throughout the mixture.It consists as two or more phases. The phases are chemically distinct from each other.

As there are two or more phases present in heterogenous mixtures they can be separated by solvent extraction where in one phase is miscible with the solvent and the other phase is immiscible.

Components of a heterogenous mixtures are distinctly visible . There are two types of heterogenous mixtures, the colloids and the suspensions.These two vary with each other with respect to particle size.

Learn more about heterogenous mixtures,here:

https://brainly.com/question/29207752

#SPJ1

Na>Al>S>Cl is the order in which the atomic sizes of the above elements decrease. We shall arrange the four specified elements in decreasing atomic radii order since they are all within the same time period.

Atomic radii in the periodic table decrease across a row from left to right and increase across a column from top to bottom. Due to these two patterns, the periodic table's lower left and upper right corners, respectively, contain the largest and smallest atoms. You can use the periodic table to keep track of broad principles or "trends" that are shown on the table. One such pattern is the atomic radius.

To learn more about atomic radii click here https://brainly.com/question/14086621

#SPJ4

Answer:Good question!! I’ll try to help you the best I can!

First off, you have to know that acetone has a density of 0.7857 g/cm^2

You also need to know that 1mL = 1cm^3

Once you know that, the rest is pretty easy you’ll see! The next step is a cross product to find out how many cm^2 are in 6.72g :

0.7857 g → 1 cm^3

6.72 g  cm^3

(1 * 6.72) ÷ 0.7857 = x

6.72 ÷ 0.7857 =x

8.55

Which means that for 6.72g of acetone, you have a volume of about 8.55cm^3.

Finally, since we’ve established in the beginning that 1cm³ = 1mL, it’s easy to answer your question!

The volume, in millilitres, of 6.72g of acetone is about : 8.55mL

There you go, I really hope this helped, if there’s anything just let me know!

Explanation:

The reaction would go left under increased pressure.

Though the question is incomplete and I can't find the complete answer online, I can try to give you an overview about the reaction. If we look at this reaction we can see that it is a reversible reaction.

We then know that the conditions of the reaction is what is going to determine the direction that the reaction is going to go in the system. Given the fact that we have more volumes on the left than on the right, the reaction would move to the left if the pressure is increased.

Learn more about reaction:https://brainly.com/question/28984750

#SPJ1

Answer: False

Explanation:

Except for a few substances like carbonates, carbides, cyanides, and cyanates, every molecule that includes carbon and hydrogen is considered to be organic. A molecule need not include nitrogen to be regarded as organic.

Amino acids, proteins, and nucleic acids are examples of organic molecules that include both carbon and nitrogen. However, not all organic substances contain nitrogen. The most prevalent organic substances are hydrocarbons and their derivatives, which are made up entirely of hydrogen and carbon.

It is essential to remember that the term "organic" is used in various settings and denotes various things depending on the industry.

While "organic" refers to items produced without the use of synthetic pesticides, fertilizers, or other chemicals in agriculture and food science, the term "organic" is used to designate substances that include carbon and hydrogen in chemistry.

Option C, compounds 2 and 3 are the compounds which are the same.

mole = mass/molar mass, mole of hydrogen = 2.10/1 = 2.10 and mole of oxygen = 32.90/15.99 = 2.10. Thus, 2.10g of H = 32.90g of O.

What is Molar mass?

Molar mass is the mass of one mole of a substance, typically measured in grams per mole. It is calculated by summing the atomic weights of all the atoms in a chemical compound.

It is important in determining the number of moles in a given mass of a substance, and in understanding the properties of a substance at a molecular level. It is also used in stoichiometry calculations to determine the amounts of reactants and products in chemical reactions.

To learn more about Molar mass, visit: https://brainly.com/question/21334167

#SPJ1