Answer:
Non-functional requirements when defined and executed well will help to make the system easy to use and enhance the performance
Explanation:
Side milling cutter is an example of ______ milling cutter.
Answer:
special type
Explanation:
As per the classification of milling cutters. This cutter can handle deep and long open slots in a more comfortable manner, which increase the productivity.
Rafel knows that lessons learned is a valuable aid to future projects. When should he and his team address
lessons learned on a project?
Select an answer:
Add lessons learned as a topic in status meetings
Review past lessons learned so a new one does not have to be created,
Create lessons learned at the end of the project.
Brainstorm lessons learned at the beginning of a project
Answer: Create lessons learned at the end of the project.
Explanation:
Lessons learned are the experiences that are gotten from a project which should be taken into account for the future projects. Lesson learned are created at the end of the project.
The main objective of the lessons learned is that they show both the positive experience and the negative experience of a project and this will help the future projects that will be undertaken.
Urgent!!!
List the assumptions that can be taken into account in torsion analysis.
Answer:
Explanation:
In the development of a torsion formula for a circular shaft, the following assumptions are made: Material of the shaft is homogeneous throughout the length of the shaft. Shaft is straight and of uniform circular cross section over its length. Torsion is constant along the length of the shaft.
Several applications are listed below. Determine the relative importance of the resilience and toughness of the materials chosen for each application. Sort the items based on whether resilience is most important, toughness is most important, or both are equally important.
a. a non-critical spring that is used repeatedly
b. a high tension music wire
c. a one use safety device that absorbs impact energy
d. a burst panel designed to rupture at
e. a certain pressure
d. a structural member in a building
Answer:
they are important together, but if you want to use just one future you must think about which one is first needed. and then try to learn for economical so don't use more money
At steady state, a thermodynamic cycle operating between hot and cold reservoirs at 1000 K and 500 K, respectively, receives energy by heat transfer from the hot reservoir at a rate of 1500 kW, discharges energy by heat transfer to the cold reservoir, and develops power at a rate of (a) 1000 kW, (b) 750 kW, (c) 0 kW. For each case, apply Eq. 5.13 on a time-rate basis to determine whether the cycle operates reversibly, operates irreversibly, or is impossible.
Answer:
a. impossible
b. possible and reversible
c. possible and irreversible
Explanation:
a. 1000kw
Qh - Wnet
we have
QH = 1500
wnet = 1000
1500 - 1000
= 500kw
σcycle = [tex]-[\frac{QH}{TH} -\frac{QC}{TC} ][/tex]
Qh = 1500
Th = 1000
Tc = 500
Qc = 500
[tex]-[\frac{1500}{1000} -\frac{500}{500} ][/tex]
solving this using LCM
= -0.5
the cycle is impossible since -0.5<0
b. 750Kw
Qc = 1500 - 750
=750Kw
Qh = 1500
Th = 1000
Tc = 500
Qc = 750
σ-cycle
[tex]-[\frac{1500}{1000} -\frac{750}{500} ]\\= 1.5 -1.5\\= 0[/tex]
This cycle is possible and it is also reversible
c. 0 kw
Qc = 1500-0
= 1500
Qh = 1500
Th = 1000
Tc = 500
Qc = 1500
σ- cycle
[tex]-[\frac{1500}{1000} -\frac{1500}{500} ]\\-(1.5-3)\\-(-1.5)\\= 1.5[/tex]
1.5>0
so this cycle is possible and irreversible
what are the main subsystem of GSM
network
Explanation:
Network and Switching Subsystem (NSS)
Base-Station Subsystem (BSS)
Mobile station (MS)
Operation and Support Subsystem (OSS)
Dalton needs to prepare a close-out report for his project. Which part of the close-out report would describe
how he would plan and manage projects in the future?
Select an answer:
project highlights
major changes and risks
summary of schedule and cost performance
summary of project management effectiveness
Answer:
Dalton
The part of the close-out report that would describe how he would plan and manage projects in the future is:
summary of project management effectiveness
Explanation:
The Project Close-out Report is a project management document, which identifies the variances from the baseline plans. These variances are specified in terms of project performance, project cost, and schedule. The project close-out report records the completion of the project and the subsequent handover of project deliverables to others. The project management effectiveness summary details the project's objectives and the achievements recorded, including the lessons learned.
Ô tô có khối lượng m (kg) đặt tại trung tâm h . Khoảng cách từ h tới 2 bánh xe hai bên của a (m) và b (m) , khoảng cách vết bánh xe AB = L ( m) . Ô tô không bị trượt ngang và đang quay vòng trên đoạn đường có góc nghiêng aphal , bán kính quay vòng r ( m ), vận tốc xe v ( m/s ). Tính chiều cao trọng tâm lớn nhất để xe không bị lật ngang .
Answer:
wiwhwnwhwwbbwbwiwuwhwhehehewhehehheheheehehehehhehehwh
Explanation:
jwhwhwhwhwhwwhhahwhahahwh
The end of the industrial robotic arm extends along the path (r = 2 + 2 cos (5t)) m. At the instant ( 0 = 0.8t ) radians. When the arm is located at (t = 0.85) second Determine the velocity and acceleration of the object A at this instant.
Answer:
v = 8.95 rad / s, a = 22.3 rad / s²
Explanation:
This is an exercise in kinematics, where we must use the definitions of velocity and acceleration
v = dr / dt
we perform the derivative
v = 0+ 2 (-sin 5t) 5
v = -10 sin 5t
we calculate for t = 0.85 t,
remember angles are in radians
v = -10 sin (5 0.85)
v = 8.95 rad / s
acceleration is defined by
a = dv / dt
we perform the derivatives
a = -10 (cos 5t) 5
a = - 50 cos 5t
we calculate for t = 0.85 s
a = -50 are (5 0.85)
a = 22.3 rad / s²
A bird is flying in air. It is stretching its wings all along the sky and is flying in a certain direction Flying a bird is an example of: a. Composition of vector b. Collinear vector c. Addition of vector d. Multiplication of vector
Answer:
a. Composition of Vector.
Explanation:
When a bird flies in the air, it stretches its wings into air and this movement helps it move in a certain direction. This is an example of composition of vector. Air strikes the wings in opposite direction and bird wing movement helps it move against the wind.
định khoản nghiệp vụ sau : tạm ứng cho nhân viên A đi công tác bằng tiền mặt 50.000
Answer:
report on a fight you have witnessed
Use a truth table to verify the first De Morgan law ¬(p ∧ q) ≡ ¬p ∨ ¬q.
Answer:
p q output ¬(p ∧ q)
0 0 1
0 1 1
1 0 1
0 0 0
p q output ¬p ∨ ¬q
0 0 1
0 1 1
1 0 1
0 0 0
Explanation:
We'll create two separate truth tables for both sides of the equation, and see if they match.
The expressions in the question use AND, OR and NOT operators.
The AND operation needs both inputs to be 1 to return a 1.The OR operation needs at least 1 of the inputs to be 1 to return a 1. The NOT operation takes a 1 and turns it into a 0, or takes a 0 and turns it into a 1.Let's start with ¬(p ∧ q)
NOT (0 AND 0) = NOT (0) = 1NOT (0 AND 1) = NOT (0) = 1NOT (1 AND 0) = NOT (0) = 1NOT (1 AND 1) = NOT (1) = 0Now let's move on to the second expression ¬p ∨ ¬q
NOT(0) OR NOT(0) = 1 OR 1 = 1NOT(0) OR NOT(1) = 1 OR 0 = 1NOT(1) OR NOT(0) = 0 OR 1 = 1NOT(0) OR NOT(0) = 0 OR 0 = 0Therefore we can say the two expressions are equivalent.
Attached the truth table to verify the first De Morgan's law ¬(p ∧ q) ≡ ¬p ∨ ¬q:
What is the explanation of the truth table?As you can see from the attached truth table, the truth values for ¬(p ∧ q) and ¬p ∨ ¬q are the same for all combinations of p and q, confirming the validity of the first De Morgan's law.
De Morgan's law is a fundamental principle in propositional logic.
It states that the negation of a conjunction (AND) is equivalent to the disjunction (OR) of the negations of the individual propositions.
Learn more about truth table at:
https://brainly.com/question/28605215
#SPJ3
Flat plate collector can provide temperature upto_____
Answer:
80⁰C
Explanation:
80°C.
Normal flat plate collectors can deliver heat at temperatures up to 80°C. Deficiency rates for normal flat plate collectors can be classified as visual losses, which produce with cumulative angles of the incident sunshine, and thermal losses, which upsurge fast with the working temperature intensities
A glass tube is inserted into a flowing stream of water with one opening directed upstream and the other end vertical. If the water velocity is 3 m/s, how high will the water rise in the vertical leg relative to the level of the water surface of the stream?
Answer:
[tex]h=0.46m[/tex]
Explanation:
From the question we are told that:
Velocity of water [tex]V=3m/s[/tex]
Height=?
Generally, the equation for Water Velocity is mathematically given by
[tex]V=\sqrt{2gh}[/tex]
Therefore Height h is given as
[tex]h=\frac{v}{2g}[/tex]
[tex]h=\frac{3^2}{2*9.81}[/tex]
[tex]h=0.46m[/tex]
The purification of hydrogen gas is possible by diffusion through a thin palladium sheet. Calculate the number of kilograms of hydrogen that pass per hour (in kg/h) through a 4.0-mm thick sheet of palladium having an area of 0.25 m^2 at 500°C. Assume a diffusion coefficient of 6.0 x 10^-8 m^2/s, that the concentrations at the high- and low-pressure sides of the plate are 3.5 and 0.25 kg/m^3 (kilogram of hydrogen per cubic meter of palladium), and that steady-state conditions have been attained. (clearly show your solution step by step, pay attention to units otherwise you will lose points!)
A 35kg block of mass is subjected to forces F1=100N and F2=75N at agive angle thetha= 20° and 35° respectively.find the distance it slides in 10seconds if the kinetic coefficient is 0.4.
Answer:
21 m
Explanation:
Since F₁ = 100 N and acts at an angle of 20° to the horizontal, it has horizontal component F₁' = 100cos20° = 93.97 N and vertical component F₁" = 100sin20° = 34.2 N.
Also, F₂ = 75 N and acts at an angle of -35° to the horizontal, it has horizontal component F₂' = 75cos(-35°) = 75cos35° = 61.44 N and vertical component F₂" = 75sin(-35°) = -75sin35° = -43.02 N
The resultant horizontal force F₃' = F₁' + F₂' = 93.97 N + 61.44 N = 155.41 N
The resultant vertical force F₃" = F₁" + F₂" = 34.2 N - 43.02 N = -8.82 N
If f is the frictional force on the block, the net horizontal force on the block is F = F₃' - f.
Since f = μN where μ = coefficient of kinetic friction = 0.4 and N = normal force on the block.
For the block to be in contact with the surface, the vertical forces on the block must balance.
Since the normal force, N must equal the resultant vertical force F₃" and the weight, W = mg of the object for a zero net vertical force,
N = mg + F₃" (since both the weight and the resultant vertical force act downwards)
N = mg + F₃"
Since m = mass of block = 35 kg and g = acceleration due to gravity = 9.8 m/s² and F₃" = 8.82 N
So,
N = mg + F₃"
N = 35 kg × 9.8 m/s² + 8.82 N
N = 343 N + 8.82 N
N = 351.82 N
So, the net horizontal force F = F₃' - f.
F = 155.41 N - 0.4 × 351.82 N
F = 155.41 N - 140.728 N
F = 14.682 N
Since F = ma, where a = acceleration of block,
a = F/m = 14.682 N/35 kg = 0.42 m/s²
To find the distance the block moved, x we use the equation
x = ut + 1/2at² where u = initial speed of block = 0 m/s, t = time = 10 s and a = acceleration of block = 0.42 m/s²
Substituting the values of the variables into the equation, we have
x = ut + 1/2at²
x = 0 m/s × 10 s + 1/2 × 0.42 m/s² × (10 s)²
x = 0 m + 1/2 × 0.42 m/s² × 100 s²
x = 0.21 m/s² × 100 s²
x = 21 m
So, the distance moved by the block is 21 m.
Which of the following is a measurement at the nominal level?
A-personal income in a year
B-student grades
C-the color of a person's hair (blond, brunette, redhead)
D-temperature
Answer:
A-personal income in a year this is the answer
A Rankine power generation cycle operates with steam as the working fluid. The turbine produces 100 MW of power using 89 kg/s of steam entering at 700C and 5MPa. The steam exits the turbine at 0.10135 MPa. Saturated liquid water exits the condenser and is pumped back to 5Mpa before it is fed to an isobaric boiler. a. Draw a schematic of the cycle. Number the streams and label any constraints across the units. b. The turbine operates adiabatically but not reversibly. What is the temperature of the steam exiting the turbine
‘Politics and planning are increasingly gaining prominence in contemporary urban and regional planning debates’. Using relevant examples, discuss this assertion reflecting on the critical success factors for the successful implementation of the land reform program in South Africa.
Answer:
The governments receiving aid were generally experienced in industrial development. ... During the 1950s, little attention was given to differences in the Third World's conditions and needs, until these appeared to create obstacles to achieving high levels of industrial output
I hope it is helpful
An apple, potato, and onion all taste the same if you eat them with your nose plugged
Answer:
I didn't understand your question or is it a fun fact
The secondary coil of a step-up transformer provides the voltage that operates an electrostatic air filter. The turns ratio of the transformer is 41:1. The primary coil is plugged into a standard 120-V outlet. The current in the secondary coil is 1.2 x 10-3 A. Find the power consumed by the air filter.
Answer:
5.9 watts
Explanation:
The secondary voltage is the primary voltage multiplied by the turns ratio:
(120 V)(41) = 4920 V
The power is the product of voltage and current:
(4920 V)(1.2·10^-3 A) = (4.92)(1.2) W = 5.904 W
The power consumed is about 5.9 watts.
A one electron species, Xm, where m is the charge of the one electron species and X is the element symbol, loses its one electron from its ground state when it absorbs 7.84×10−17 J of energy. Using the prior information, the charge of the one electron species is?
Answer:
c +5
Explanation:
we have difference in energy =
2.18x10⁻¹⁸ x z² / n²
now n = 1
amount of energy absorbed Δdelta = 7.84×10−17 J
7.84×10⁻¹⁷ = 2.18x10⁻¹⁸ x z²
we divide through by 2.18x10⁻¹⁸
z² = 7.84×10⁻¹⁷ / 2.18x10⁻¹⁸
z² = 35.9633
z = √35.9633
z = 5.9969
≈ 6
charge = atomic number 6 - number of electrons available in the element 1
= 6-1 = 5
from the calculations above, the charge of the one electron specie would be c +5
Determine the reactor volume (assume a CSTR activated sludge aerobic reactor at steady state) required to treat 5 MGD of domestic wastewater from an influent BOD concentration of 250 mg/L to an effluent concentration of 10 mg/L. X (MLVSS) = 3000 mg/L, and the kinetics are first order and not variable order. The first order equation you must use to calculate the specific substrate utilization rate is q = K S where S is the effluent BOD concentration and K is the first order BOD degradation rate constant. The value of K is 0.04 L/(day*mg). What is the required reactor volume in MG (millions of gallons)? All the choices below are in units of MG.
0.4
1.0
0.2
4.8
Answer:
1.0MG
Explanation:
to solve this problem we use this formula
S₀-S/t = ksx --- (1)
the values have been given as
concentration = S₀ = 250mg
effluent concentration = S= 10mg
value of K = 0.04L/day
x = 3000 mg
when we put these values into this equation,
250-10/t = 0.04x10x3000
240/t = 1200
we cross multiply from this stage
240 = 1200t
t = 240/1200
t = 0.2
remember the question says that 5MGD is required to be treated
so the volume would be
v = 0.2x5
= 1.0 MG
anxiety: a. is never normal. b. is common of many psychological disorders c. is identical to fear d. is a modern development, unlikely to have roots in human history
Answer:
B
Explanation:
Anxiety is very common especially nowadays but it's especially common in psychological disorders
Problem 89:A given load is driven by a 480 V six-pole 150 hp three-phase synchronous motor with the following load and motor data. Determine the voltage E necessary for this operating condition. Note: assume that the rotational loss torque is negligible. Load: Tൌ0.05∗????ଶ????mMotor: Eൌ400 V; Xௗൌ1ΩAnswer: Eതൌ400∠-17.36° V
Answer:
[tex]E_f=400<-17.4volts[/tex]
Explanation:
From the question we are told that:
Load [tex]V=480[/tex]
Poles [tex]p=6[/tex]
Power [tex]P=150hp[/tex]
3-Phase
Load:
[tex]Tl=0.05*\omega_s^2Nm[/tex]
Motor:
[tex]Ef=400V\\\\X_d=1ohm[/tex]
Generally the equation for Synchronous speed is mathematically given by
[tex]N_s=\frac{120F}{p}=\frac{120*60}{6}[/tex]
[tex]N_s=1200rpm\\\\N_s=125.66 rads/sec[/tex]
Therefore
[tex]Tl=0.05*\omega_s2Nm[/tex]
With
[tex]\omega=N_s[/tex]
We have
[tex]Tl=0.05*(125.66)^2Nm[/tex]
[tex]T_l=789.52 Nm[/tex]
Therefore
Load Power
[tex]P_l=T_l*\omega_s\\\\P_l=789.52*125.66[/tex]
[tex]P_l=9922watts[/tex]
Generally the equation for Load Power is mathematically given by
[tex]P_l=\frac{\sqrt{3}*E_f.V_t}{x_d}*sin\theta\\\\9922=\frac{\sqrt{3}*480*400}{1}*sin\theta[/tex]
[tex]\theta=17.4 \textdegre3[/tex]
Therefore
Voltage
[tex]E_f=400<-17.4volts[/tex]
Explain the 11 sections that a typical bill of quantity is divided into
Answer:
The main sections included in the bill of quantities are Form of Tender, Information, Requirements, Pricing schedule, Provisional sums, and Day works.
While reflecting on the solutions and the process of concept generation, the development team takes a look at some critical questions such as:________.
1. Is the team developing confidence that the solution space has been fully explored?
2. Are there alternative diagrams and alternative ways to decompose the problem?
3. Have external sources been thoroughly pursued, and everyone’s ideas been accepted and integrated in the process?
4. All of the above
Answer:
While reflecting on the solutions and the process of concept generation, the development team takes a look at some critical questions such as:________.
4. All of the above
Explanation:
The team must explore its solution space, including some external sources. Then, it must integrate its findings with the ideas of team members, ensuring the consideration of all possible ways to decompose the problem. This is because employing a structured process to concept generation enables the team to come up with creative solutions to design concepts.
An incompressible viscous fluid flows through a pipe with a flow rate of 1 mL/s. The pipe has a uniform diameter D0 and a length L0. A pressure difference of P0 between the ends of the pipe is required to maintain the flow rate. What would be the flow rate if the pressure difference was increased to 2P0 and the diameter was increased to 2D0
Answer:
[tex]Q_2 = 32[/tex] mL/s
Explanation:
Given :
The flow is incompressible viscous flow.
The initial flow rate, [tex]Q_1[/tex] = 1 mL/s
Initial diameter, [tex]D_1= D_0[/tex]
Initial length, [tex]L_1=L_0[/tex]
The initial pressure difference to maintain the flow, [tex]P_1=P_0[/tex]
We know for a viscous flow,
[tex]$\Delta P = \frac{32 \mu V L}{D^2}$[/tex]
[tex]$\Delta P = \frac{32 \mu Q L}{\frac{\pi}{4}D^4}$[/tex]
[tex]$Q \propto \Delta P \times D^4$[/tex]
[tex]$\frac{Q_1}{Q_2}= \frac{P_1}{P_2} \times \left( \frac{D_1}{D_2} \right)^4$[/tex]
[tex]$\frac{1}{Q_2}= \frac{P_0}{2P_0} \times \left( \frac{D_0}{2D_0} \right)^4$[/tex]
[tex]$\frac{1}{Q_2}= \frac{1}{2} \times \left( \frac{1}{2} \right)^4$[/tex]
[tex]$\frac{1}{Q_2}= \frac{1}{32}$[/tex]
∴ [tex]Q_2 = 32[/tex] mL/s
The flow rate if the pressure difference was increased to 2P0 and the diameter was increased to 2D0 is; Q2 = 32 mL/s
We are given;
Initial flow rate; Q1 = 1 mL/s
Initial uniform diameter; D0
Initial Length; L0
Initial Pressure difference; P0
Relationship between pressure, flow rate and diameter for vicious flow is given by;
Q1/Q2 = (P1/P2) × (D1/D2)⁴
Where;
Q1 is initial flow rate
Q2 is final flow rate
P1 is initial pressure difference
P2 is final pressure difference
D1 is initial diameter
D2 is final diameter
We are told that the pressure difference was increased to 2P0 and the diameter was increased to 2D0. Thus;
P2 = 2P0
D2 = 2D0
Thus;
1/Q2 = (P0/2P0) × (D0/2D0)⁴
>> 1/Q2 = ½ × (½)⁴
1/Q2 = 1/32
Q2 = 32 mL/s
Read more about vicious flow at; https://brainly.com/question/2684299
To avoid a possible collision with a manned airplane, you climb your unmanned aircraft to yield the right of way. In doing so, your unmanned aircraft reached an altitude greater than 600 feet AGL. To whom must you report the deviation?
Answer:
you have to report to the federal aviation administration upon request
Explanation:
An unmanned aircraft can also be a drone it is an aircraft that does not have passengers or a human pilot.
Such an aircraft could be fully autonomous but most times they have a human pilot who controls it remotely.
Now you have to report this deviation to the federal aviation administration. This body is responsible for the enforcement of regulations that have to do with the manufacture, operation and maintenance of aircrafts. The body makes sure there is an efficient and safe system for a navigation and they also control air traffic.
Tech A says that the voltage regulator controls the strength of the rotor s magnetic field. Tech B says that the voltage regulator is installed between the output terminal of the alternator and the positive terminal of the battery. Who is correct?
Answer:
Voltage Regulator
Technician A is correct.
Explanation:
Technician B is not correct. The voltage regulator is not installed between the output terminal of the alternator and the positive terminal of the battery as claimed by Technician B. Technician A's opinion that the voltage regulator controls the strength of the rotor's magnetic field is correct. The computer can also be used to control the output of the alternator by controlling the field current.
