From the seven isotopes of ge, Ge-77 is a radioactive isotope and has a half life of 11.3 hours.
Germanium (32Ge) has five naturally occurring isotopes, 70Ge, 72Ge, 73Ge, 74Ge, and 76Ge. Of these, 76Ge is very slightly radioactive, decaying by double beta decay with a half-life of 1.78 × 1021 years[3] (130 billion times the age of the universe)g ge has several stable isotopes, the most common being ge-74. ge-77 is a radioactive isotope. ge-77 would be question blank 1 of 2 the band of stability. ge-77 is likely to undergo.
Germanium compounds are also used for polymerization catalysts and have most recently found use in the production of nanowires. This element forms a large number of organogermanium compounds, such as tetraethylgermanium, useful in organometallic chemistry. Germanium is considered a technology-critical element.Germanium is considered a technology-critical element
To know more about isotopes:-
brainly.com/question/27475737
#SPJ4
dishwashing liquid, toothpaste, and butter are used for different purposes, but they would all be considered products.
The products such as dishwashing liquids, toothpaste and butter are important in chemistry and have different uses.
Dishwashing liquid has the chemical method is C17H35COO- plus a metallic cation, both Na+ or K+. The very last molecule is known as sodium stearate and is a kind of salt. Depending at the metallic cation, soaps are both potassium salts or sodium salts organized as long-chain carboxylic acids.
Everyday items, inclusive of toothpaste, revolve round chemistry. Lets first start out with toothpaste's maximum widely known element Sodium Fluoride.
Some molecules like water (H20) or sugar (C6H12O6), butter does now no longer have one molecular formula; rather, it's far a aggregate of triglycerides.
To learn more about molecular formula check the link below:
https://brainly.com/question/20442936
#SPJ4
The rate constant, k, for a first-order reaction is equal to 0.00042s-¹. What is the half-life for the reaction?
The half-life of a first-order reaction is the time it takes for the concentration of the reactant to decrease by half. The half-life of a first-order reaction is inversely proportional to the rate constant, k, for the reaction.
To calculate the half-life of a first-order reaction, you can use the equation:
half-life = ln(2) / k
In this equation, ln(2) is the natural logarithm of 2, and k is the rate constant for the reaction.
Plugging in the value for the rate constant, k gives:
half-life = ln(2) / 0.00042 s-1 = 1.609 s
Therefore, the half-life for the reaction is 1.609 s.
Learn more about Half-life Reactions here:
https://brainly.com/question/14228544
___________inversions are present during strong sieges of acidic smog in London. This type of inversion combined with the combustion of ____________ during December of 1952 resulted in thousands of deaths from the resulting smog.
Temperature inversions are present during strong sieges of acidic smog in London. This type of inversion combined with the combustion of coal during December of 1952 resulted in thousands of deaths from the resulting smog.
What is Temperature?
Temperature refers to the hotness or coolness of a body. In specific terms, it is the means of determining the kinetic energy of particles within an object. When particles move more quickly, the temperature rises, and vice versa.
The temperature has a crucial part in practically every area of our everyday life as well as in all scientific domains, from physics to geology.
As the temperature rises, so does the velocity of these particles.
Temperature is a proportion of how hot or cold something is; explicitly, a proportion of the typical motor energy of the particles in an item, which is a sort of energy related with movement. Be that as it may, how hot will be hot, and the way in which cold will be cold? The terms hot and cold are not extremely logical terms. We should utilize temperature to portray how hot or cold something is. How hot, for example, is liquefied iron? To respond to that inquiry, an actual researcher would gauge the temperature of the fluid metal. It is less befuddling to utilize temperature rather than words like hot or cold.
Learn more about Temperature from given link
https://brainly.com/question/25677592
#SPJ4
Which of the following is a good practice to aid in preventing spillage?
There are many ways in which it can be ensured that chemicals do not get spilled .
To store Chemicals in Covered AreasTo use Spill Kits, Bunds, and Spill PalletsTo store Containers on Secure ShelvingTo prevent Overcrowding in Chemical Storage UnitsTo ensure Chemicals Are Stored at or Below Eye LevelTo regularly Inspect Chemical Containers on Site for Leaks or DeteriorationTo safeguard the Transportation of Chemical ContainersTo implement Strict Decanting Procedures.How quickly a chemical spill or leak can cause a serious accident or disaster is shocking. Chemical production, storage, and transportation all present a multitude of potential accident sites due to their volatile nature. Chemical safety in the workplace can be greatly increased by putting in place a strong emergency response plan and well-established spill prevention procedures.
To know more about chemicals safety, please refer:
https://brainly.com/question/26358183
#SPJ4
Explain why the following two elements
are isotopes. State the number of protons,
electrons, and neutrons each isotope
possesses.
121 Sn
50
119 Sn
50
Answer:4.8: lsotopes
Explanation:
An isotope is one of two or more chemical elements that exist in different forms. Varied isotopes of an element share the same atomic number and protons in their nuclei, giving them the same atomic weight. However, each elemental isotope has a different amount of neutrons, which changes its atomic weight.
What are isotope ?Isotopes are members of the same element's family but have variable numbers of neutrons despite having the same number of protons. The atomic number of an element on the Periodic Table is determined by the number of protons in its nucleus.
The name "isotope" refers to the fact that different isotopes of the same element occupy the same location on the periodic table. The term "isotope" is derived from the Greek words "the same place" (isos) and "the same place" (topos), respectively.
Name Tin¹¹⁹₅₀
Atomic Mass 118.71 atomic mass units
Number of Protons 50
Number of Neutrons 69
Number of Electrons 50
Name Tin¹²¹₅₀
Atomic Mass 118.71 atomic mass units
Number of Protons 50
Number of Neutrons 71
Number of Electrons 50
Thus, An isotope is one of two or more chemical elements that exist in different forms.
To learn more about an isotope, follow the link;
https://brainly.com/question/11680817
#SPJ2
What is it called when electrons are shared?; What is the attraction for shared electrons?; What is the attraction one atom has towards an electron called?
When electrons are shared between two atoms, they make a bond called a covalent bond
A non-polar covalent bond is a type of chemical bond that occurs when two atoms share electrons equally. As a result, the number of electrons shared by the neighboring atoms in an atom would be equal.
Since the difference in electronegativity is usually small, the covalent bond is often referred to as nonpolar. It also means that there is no charge separation between the two atoms or that their electronegativity is identical. When atoms that share a polar bond arrange themselves in such a way that their electric charges cancel each other out, this type of bond is formed.
A non-polar covalent bond may form between two non-metal atoms that are the same or between atoms that are different.
Non-polar covalent compounds are covalent compounds that have no difference in electronegativity. There is no improvement in electronegativity in these compounds because bond pairs of electrons do not move towards the bonded atoms.
To know more about Covalent bond
https://brainly.com/question/10777799
#SPJ4
4.1) An acid, H₂A, reacts with sodium hydroxide as shown in the equation below.
H₂A(aq) + 2NaOH(aq) → 2Na*(aq) + A²- (aq) + 2H₂O(1)
A solution of this acid was prepared by dissolving 2.02 g of H₂A in water and making the volume up to 250
cm³ in a volumetric flask.
A 25.0 cm³ sample of this solution required 22.80 cm³ of 0.150 mol dm3 aqueous NaOH for complete
reaction. Calculate the relative molecular mass, Mr, of H₂A
The relative molecular mass of the acid, H₂A, given that it required 22.80 cm³ of 0.150 moldm⁻³ aqueous NaOH for complete reaction is 1181.29 g/mol
How do I determine the molar mass of the acid, H₂A?We'll begin by obtaining the number of mole of the acid that reacted. Details below:
Volume of NaOH (n) = 22.80 cm³ = 22.80 / 1000 = 0.0228 dm³Molarity of NaOH (M) = 0.150 moldm⁻³Mole of base, NaOH = n × M = 0.150 × 0.0228 = 0.00342 moleNumber of mole of acid, H₂A =?H₂A(aq) + 2NaOH(aq) → 2Na*(aq) + A²⁻(aq) + 2H₂O(l)
From the balanced equation above,
2 moles of NaOH reacted with 1 mole of H₂A.
Therefore,
0.00342 mole of NaOH will react with = 0.00342 / 2 = 0.00171 mole of H₂A
Finally, we shall determin what molar mass of the acid, H₂A. Details below:
Mole of acid, H₂A = 0.00171 moleMass of acid, H₂A = 2.02 gMolar mass of acid, H₂A =?Molar mass = mass / mole
Molar mass = 2.02 / 0.00171
Molar mass = 1181.29 g/mol
Thus, the molar mass of the acid, H₂A is 1181.29 g/mol
Learn more about molar mass:
https://brainly.com/question/15874532
#SPJ1
What are some signs of chemical change?
Here some signs of chemical change :
Color Change.Production of an odor.Change of Temperature.Evolution of a gas (formation of bubbles)Precipitate (formation of a solid)What is a chemical change?Chemical change, or, alternatively, chemical breakdown into two or more separate molecules, occurs when one material reacts with another to create a new substance. These processes are referred to as chemical reactions, and they are often irreversible barring additional chemical reactions. Exothermic processes are those that generate heat; endothermic reactions, on the other hand, are those that may need heat in order to proceed. The science of chemistry places a lot of emphasis on comprehending chemical changes.Atoms are rearrange during chemical reactions, and as new products are produced, the reaction is accompanied by an energy change. The reaction of sodium and water to produce sodium hydroxide and hydrogen is an illustration of a chemical change.Learn more about chemical change refer to :
https://brainly.com/question/1222323
#SPJ4
based on the synthesis reaction, what would the product of the reaction be? napo3 cuo → ? nao cupo3 na p cu o4 nacupo4 nacu po4
NaPO3 and CuO produce CuNaPO4 as the result of the synthesis procedure. Synthesis reactions are those in which two chemicals react to produce a single result.
In a synthesis reaction, which is created?When two or more reactants come together to create one product, it is called a synthesis reaction. The general formula A + B AB is used to depict this kind of reaction. When sodium and chlorine are combined to form sodium chloride, this is an illustration of a synthesis reaction (NaCl).Chemical reactions can take many different forms. According to what happens during a reaction, reactions are categorized into groups.Synthesis reactions are those in which two chemicals react to produce a single result. In this instance, NaPO3 and CuO are mixed. CuNaPO4 is the reaction's end product (blue bead). NaPO3 + CuO -> CuNaPO4 is the equation for this reaction.To learn more about Synthesis reaction refer to:
https://brainly.com/question/16447405
#SPJ1
Classify each of the following substances as a nonelectrolyte, weak electrolyte, or strong electrolyte in water. KCIO, Cu(NO3)2 CH,CHOH NH, H.SO
Water-soluble strong electrolyte or weak electrolyte Cu(NO3)2 CH, NH, CHOH, KCIO, and H.SO
What are the 4 different forms of electrolytes?Types of electrolytes include sodium, chloride, potassium, and calcium. We obtain them through the foods and beverages we consume (see the chart below for further examples). Blood tests are used to assess electrolyte levels, which must remain within a very narrow range to prevent major issues.
How often should I consume electrolytes?Taking an electrolyte supplement is undoubtedly an excellent option for daily health as dehydration may make you tired and produce headaches. You can feel more in control of your thoughts and maintain the proper level of hydration by consuming the optimum number of electrolytes.
To know more about Electrolytes visit:
https://brainly.com/question/28699046
#SPJ4
What is an unsaturated solution?; What is a saturated solution?; What happens when you add more solute to an unsaturated solution?; What happens if a solute is added to a saturated solution?
An unsaturated solution is one in which more solute can be dissolved into the solution. The solution has yet not reached its saturation point and its concentration can be further increased.
A saturated solution is one in which no more solute can be dissolved. The solution has reached the maximum concentration that it possibly can at that temperature.
When more solute is added to an unsaturated solution, it dissolves into the solution, increasing the concentration of the solute. Unless the saturation point is reached in the solution, no solute settles at the bottom of the container. Any amount of solute can be added to a solution until it reaches its saturation point.
When more and more solute is added to a saturated solution, it has no effect on the concentration of the solution. The solute settles to the bottom of the container as it can not be dissolved anymore. Causing an increase in the temperature can increase the solubility of the solution and increase the amount of solute that can be dissolved into the solution.
A solution is a homogenous mixture of two or more substances in which one or more substances are dissolved in a medium such as liquid or a gas. The dissolved part that is usually less in mass is called the solute and the dissolving medium that is usually present in excess is called the solvent. An example of a solid-liquid solution can be a salt-water solution. An example of a liquid-liquid solution can be an alcohol-water solution.
To learn more about saturation :
https://brainly.com/question/22649678
What is the correctly balanced equation for the reaction of rust?; What is the correctly balanced equation?; What is the correct equation for the reaction of hydrochloric acid and iron?; Which is the correctly balanced equation for the reaction of KOH and h2so4?
The correctly balanced equation for the reaction of rust is 4Fe + 3O₂ + 2xH₂O → 2Fe₂O₃. x H₂O.
The correct equation for the reaction of hydrochloric acid and iron is 2HCl + Fe → FeCl₂ + H₂.
The correctly balanced equation for the reaction of KOH and H₂SO₄ is KOH + H₂SO₄ → K₂SO₄ + H₂O.
A chemical reaction is a process to rearranges the constituent atoms of the reactants to create different substances as products. Rusting is a chemical reaction between iron, water, and air (oxygen gas).
Fe + O₂ + 2xH₂O → Fe(OH)₃A chemical reaction between acid and metal is salt and hydrogen gas.
Hydrochloric acid = HCl → H⁺ + Cl⁻Iron = FeA chemical reaction between acid and base is salt and water.
Base KOH → K⁺ + OH⁻Acid H₂SO₄ → 2H⁺ + SO₄⁻²KOH + H₂SO₄ → K₂SO₄ + H₂OLearn more about balanced chemical reaction here: https://brainly.com/question/26694427
#SPJ4
What is the ground state electron configuration for Ru2+?
The electron configuration of the ruthenium II ion is written as; [tex]1s^2 2s^2 2p^6 3s^2 3p^6 3d^10 4s^2 4p^6 4d^7 5s^1[/tex]
What is electron configuration?We know that electrons are arranged in a specific way in the atoms of the elements. The way and manner in which the electrons are arranged in the atom of the element is what is going to determine the kind of chemical reactions that the specie is going to undergo.
Here we have the the ruthenium II ion and we know that ruthenium is one of the transition elements and it does have some electrons that can be found in the d orbitals and that is why we can find it in the d block of the periodic table.
Learn more about electron configuration:https://brainly.com/question/14283892
#SPJ1
the following items describe fatty acid synthesis, amino acid synthesis, or both. drag the items to the appropriate box.
Fatty Acid Biosynthesis:-
Conducted by cyclic processes, requires acetyl-CoA carboxylase
Amino Acid Biosynthesis:-
Requires diverse enzymes, requires fixed nitrogen, uses glutamate dehydrogenase
Both:- Requires reducing energy, requires fixed carbon
Fatty acids are primary metabolites synthesized by complex, elegant, and essential biosynthetic machinery. Fatty acid biosynthesis begins with acetyl-CoA, and carboxylation produces the malonyl-CoA building blocks that are subsequently condensed and reduced in an iterative fashion until the fatty acid chain matures for use by the cell.
Amino acids are classically considered the building blocks from which proteins are synthesized. The biosynthesis of amino acids involves several biochemical pathways in which amino acids are assembled from other precursors. The biosynthesis of amino acids is distinct from that involving lipids or carbohydrates because it includes the use of nitrogen.
Learn more about amino acid synthesis here:
https://brainly.com/question/29508803
#SPJ4
Which of the following statements is correct regarding Galvanic cell ?
A. It converts electrical energy into chemical energy
B. It converts electrolyte into individual ions
C. It converts metal from its elemental state to the combined state
D. It converts chemical energy into electrical energy
The correct statement regarding galvanic cells is that it converts chemical energy into electrical energy
An electrochemical cell that converts the chemical energy of spontaneous redox reactions into electrical energy is known as a galvanic cell or a voltaic cell. Galvanic cell Voltaic cell is an electrochemical cell that makes use of chemical reactions to generate electrical energy
Galvanic cells usually harness the electrical energy available from the electron transfer in a redox reaction to perform useful electrical work. The key to gathering the electron flow is to separate the oxidation and reduction half-reactions, connecting them by a wire, so that the electrons must flow through that wire
Galvanic cells derives its energy from spontaneous redox reactions, while electrolytic cells involve non-spontaneous reactions and thus require an external electron source like a DC battery or an AC power source.
To know more about galvanic cells
https://brainly.com/question/13031093
#SPJ4
What is splitting a uranium atom called?; What is the process of splitting a nucleus called?; What happens when a uranium nucleus splits?; What is the process of splitting the uranium nucleus into two smaller nuclei?
When an U-235 nucleus absorbs an extra neutron, it quickly breaks in two parts. This process is known as the fission .
Each time a U-235 nucleus splits up, it releases the two or three neutrons. Hence, possibility exists for creating a chain reaction.
In nucleus of each atom of uranium-235 (U-235) are 92 protons and 143 neutrons, for the total of 235. The arrangement of the particles within uranium-235 is somewhat unstable and nucleus can disintegrate if it is being excited by an outside source.
Production of neutrons is the main purpose of the MIT Research Reactor. The center active core contains an enormous number of neutrons that are moving at extremely high speeds in all directions while it is active.
Six boron-stainless steel control blades that are installed vertically next to the fuel components in the MIT reactor's uranium nuclei primarily regulate the pace of fissions. Neutrons can be absorbed by boron without being reemitted.
The amount of neutrons that the control blades absorb from the uranium when they are fully implanted is too great for a chain reaction to continue. The reactor's control blades are lifted very gradually to turn it on. more neutrons are produced as less and fewer of them are absorbed.
To know more about uranium 235, please refer:
https://brainly.com/question/22464890
#SPJ4
The Lewis diagram for PO(OH)_3 is: The electron-pair geometry around the P atom in PO(OH)_3 is. There are lone pair(s) around the central atom, so the geometry of PO(OH)_3 is B. The Lewis diagram for XeO_3 is: The electron-pair geometry around the Xe atom in XeO_3 is There are lone pairs around the central atom, so the geometry XeO_3 is is
The electron-pair geometry around the P atom in PO(OH)₃ is tetrahedral. the molecular geometry of PO(OH)₃ is tetrahedral. the electron pair geometry of XeO₃ is tetrahedral and the molecular geometry is pyramidal.
The electron-pair geometry around the P atom in PO(OH)₃ is tetrahedral. There are lone pair(s) around the central atom is zero, so the molecular geometry of PO(OH)₃ is same as the electron pair geometry is tetrahedral.
The the electron pair geometry of XeO₃ is tetrahedral. There are lone pairs around the central atom is one lone pair of electrons, so the molecular geometry is different from electron pair geometry of XeO₃ is pyramidal.
To learn about molecular geometry here
https://brainly.com/question/16178099
#SPJ4
which of the following molecules have the greatest internuclei distance? 1. which of the following molecules have the greatest internuclei distance? i2 n2 br2 cl2 o2
The largest internuclear distance is seen in cl2. The equilibrium distance between the two atoms' nuclei that make up a covalent connection is known as the bond length or bond distance.
It is often measured in nanometers or angstroms. The average distance between the nuclei of two bound atoms in a molecule is referred to in molecular geometry as the bond length or bond distance. It is a movable quality of a link between atoms of fixed kinds, largely independent of the remainder of the molecule. The term "internuclear distance" refers to the separation between two nuclei. It varies inversely with ion bond order, which indicates that the smaller the internuclear distance, the higher the bond order.
Learn more about internuclear distance here
https://brainly.com/question/18484436
#SPJ4
A Cycle of Chemical Reactions of Copper PRE-LABORATORY ASSIGNMENT Finish the pre-laboratory assignments before the laboratory experiment. Read the manual of this experiment and complete the following questions. 1. a. Identify oxidation-reduction reactions in the copper cycle experiment. For each oxidation-reduction reaction, write half reactions to show what is oxidized and what is reduced. Identify acid-base reactions and precipitation reactions in the copper cycle experi- ment. Write equations for the corresponding reactions. b. How many mL of 3.0 M NAOH are required to neutralize 4.0 mL of 16.0 M HNO2? 2. 1N Copper. AplL tions and interpreting them in terms of chemical equations. You will also use a simple classification scheme for grouping chemical reactions by type. Finally, you will practice quantitative lab techniques by trying to recover the copper with minimal loss. AN OVERVIEW OF THE COPPER CYCLE One of the most fascinating aspects of laboratory experiments to new chemistry students is the variety of colors, odors, and textures encountered. The present experiment demonstrates that aspect by a sequence of striking changes in color, appearance, and bulk. By going through this experiment, students will develop laboratory techniques by the challenges of shepherding copper through all chemical changes with minimal loss. A schematic outline of the chemical reactions involved in the experiment is shown in Figure 5-1 HNO Cu(NO)2 Cu (1) NaOH (2) Zn (5) Cu(OH), 9VOA CUSO je() A (heat) 1000 Ht H,SO Cuo Figure 5-1. A schematic outline of the series of chemical reactions in the copper cycle. The overall copper cycle is then given as Cu(NO,)2(aq) Cu(s) Cu(OH)2(s) CuO(s) CUSO,(aq) Cu(s) The balanced equations corresponding to these steps are: Nitric acid is not only a strong acid but also a strong oxidizing agent, making it a very effective solvent for most metals. 1. (1) 4HNO,(aq)+ Cu(s) Cu(NOs)2(aq) + 2H20(l) + 2NO2(g) Many heavy metals form insoluble hydroxides which can be precipitated from solutions by sol- uble hydroxides such as NaOH. 2. (2) Cu(OH)2(s) + 2NANO,(aq) Cu(NO,)2laq) + 2NaOH(aq) Many transition metal hydroxides lose water upon heating, thus changing to oxides. For copper, this reaction happens at a relatively lower temperature and is accompanied by a striking color change, from blue to black. 3. (3) Cu(OH)2(s)Cu0(s) + H20(e) 4. Metal oxides, being base an hydrides, form salts with acids just as readily as do the bases themselves. CuO(s) + H,SO(aq) CuSO(aq) + H20(e) (4) 5. Chemically active metals, such as zinc, readily displace less active metals from their salts. CuSO&(aq) + Zn(s) Cu(s) + ZnSO(aq) (5) 6. The reaction used to remove excess Zn(s) left over from eq(5): Zn(s) +2H*(aq) Zn2t(aq) + H(g) (6) The last reaction is not explicitly shown in the cycle, but actually occurs twice. The first reaction is with H from excess HSO, as a side reaction during the reduction of CuSO and the second one is with HCL, as an intentional step for the removal of excess Zn remaining in solution after reduction of Cu2+ to Cu. Each equation, as given above, describes one of the colorful transformations, but it is easy to lose sight of their physical meaning if you merely look upon them as a bunch of symbols written on paper. To become more familiar with the chemical equations it is essential to try the following: Find out what the compounds, represented by the formulas, actually look like and what their chemical properties are. a. What class of compounds they belong to, e.g. acid, salt, etc., and what the generic properties of this class are, ie. what types of reactions they undergo. b. Similarly, try to categorize the equations (actually, the reactions they represent): oxidation- reduction (redox) reaction, acid-base reaction, precipitation reaction, replacement reaction, C. etc CLASSIFICATION OF CHEMICAL REACTIONS Precipitation In a precipitation reaction, two soluble substances react to form an insoluble compound, e.g. (7) CaCl2+ Na COs CaCO,(s) + 2NaCl CACO3 is insoluble in water so this salt will form a precipitate and fall out of the solution. 45 LAB 5: A CYCLE OF CHEMICAL REACTIONS OF COPPER
1 . a.
Solution :
a. The oxidation reduction reactio is
1. HNO₃ + Cu(3) --> Cu(NO₃)₂ + 2H₂O(l) + 2NO₂(g)
Half reaction
oxidation --> Cu(s) --> Cu(NO₃)₂(aq)
reduction --> HNO₃ -->NO₂
copper is oxidized and nitrogen is reduced
2 -> CuSO₄(aq) + zn(s) --> Cu(s) + ZnSO₄(aq)
Half reaction .
oxidation --> Zn(s) --> ZnSO4(aq)
Reduction --> CuSO₄ (aq) --> Cu(s)
zinc is oxidized and copper is reduced.
3 -> Zn(s) + 2H⁺(aq) --> Zn²⁺(aq) + H₂(g)
oxidation --> Zn(s) --> Zn²⁺(aq)
Reduction --> 2H⁺(aq) -->H₂(g)
Zinc is oxidized and hydrogen is reduced .
b . Acid - base reaction
CuO(s) + H₂SO₄(aq) -->CuSO₄(aq) + H₂O(l)
precipitation reaction
Cu(NO₃)₂(aq) + 2NAOH(aq) -->Cu(OH)₂ + 2NANO₃
2 . 21.33 mL of 3.0 M NAOH are required to neutralize 4.0 mL of 16.0 M HNO2
1 mole of NAOH required to neutralized the
1 mole of HNO₃
NAOH + HNO₃ --> H₂O +NANO₃
(M₁V₁)NAOH = (M₂V₂)HNO2
3 * V₁ = 4 * 16
V₁ = 64/3
V₁= 21.33 ml
The term oxidation was originally used to describe the reaction in which an element combines with oxygen.
Example: The reaction of magnesium metal with oxygen to form magnesium oxide involves the oxidation of magnesium.
The term reduction comes from the Latin root and means "to undo". So anything that goes back to magnesium metal is a reduction.
The reaction of magnesium oxide with carbon at 200°C to form magnesium metal and carbon monoxide is an example of the reduction of magnesium oxide to magnesium metal.
electrons were discovered, the chemist became convinced that redox reactions involve the transfer of electrons from one of his atoms to another.
Learn more about oxidation and reduction here : https://brainly.com/question/4222605
#SPJ4
How many grams in 4.65 x 1024 atoms of He?
Answer:
30.9 g He
Explanation:
To find the mass of the helium (He) sample, you need to
(1) convert atoms to moles (using Avogadro's Number)
(2) convert moles to grams (using the atomic mass of He)
It is important to arrange the conversions/ratios in a way that allows for the cancellation of units. The final answer should have 3 sig figs like the given value (4.65 x 10²⁴ = 3 sig figs).
Avogadro's Number:
6.022 x 10²³ atoms = 1 mole
Atomic Mass (He): 4.0026 g/mol
4.65 x 10²⁴ atoms He 1 mole 4.0026 g
-------------------------------- x -------------------------------- x ----------------- = 30.9 g He
6.022 x 10²³ atoms 1 mole
Which of the following represents alpha decay?
OA. 100Eu+ge 16Sm
150
→>>
OB. 100Gd
OC. Tc-TC+y
OD. 14Gd-14Sm+ He
→>>>
100Tb + e
65
100Eu+e 16S---Sm150 represents alpha decay because minimum penetration power and highest ionization power.
What does an alpha decay look like?
A positively charged particle similar to the helium-4 nucleus is spontaneously released during alpha decay. Two protons and two neutrons make up this particle, also referred to as an alpha particle. Sir Ernest Rutherford made the discovery and gave it a name in 1899.
What substances exhibit alpha decay?The nuclei of heavy elements like radium, uranium, thorium, etc. undergo alpha decay. When a radium (Ra) nucleus decays, it releases an alpha particle and transforms into a radon (Rn) nucleus.
To know more about alpha decay visit:-
https://brainly.com/question/27870937
#SPJ1
Fill in the blanks with the complete nuclide symbols for the particles that are required to balance the following nuclear reactions.
the complete nuclide symbols for the particles that are required to balance the following nuclear reactions is : 54Cr24
Let the reactant be X, Balance mass number on both sides, mass of Bi + mass of X = mass of n + mass of Bh 1*209 + M = 1*1 + 1*262, M = 54. Balance atomic number on both sides atomic of Bi + atomic of X = atomic of n + atomic of Bh,1*83 + A = 1*0 + 1*107, A = 24. Atomic number 24 is for element Cr. So, the reactant is 54-C. Answer: 54Cr24. Nuclides are frequently authored as AZX, in Which an is the total amount of protons and neutrons, Z reflects the amount of protons, and the distinction between B and Z represents the number of neutrons. Thus, 3717Cl signifies chlorine-37. A balanced equation is a chemical equation wherein mass is preserved so each element has an equivalent atomic mass on both sides of the issue.
Learn more about Nuclides here:
https://brainly.com/question/17216436
#SPJ4
Which of the following are the common TYPES of reducing agent used in organic chemistry?
A. Dissolving metal reagents
B. Hydride reducing agents
C. Molecular H2
D. Chromium reducing agents
The two most frequent types of reducing agents employed in organic chemistry are dissolving metal reagents and hydride reducing agents. Here, the term "chemical substance" refers to metal catalysts.
As well as reducing agents. that alter the speed of chemical reactions or interact with other chemical compounds during those reactions. For the purposes of this recommendation, they are ingredients utilized to create the drug substance or an excipient that is a component of a pharmaceutical product. The process of catalysis is the addition of a catalyst to a chemical reaction to speed up the rate of the reaction. Neither during the reaction nor after it, catalysts are consumed.
Learn more about reducing agents here
https://brainly.com/question/2890416
#SPJ4
Increasing concentration of dissolved CO2 raises the _______ of ocean water.basicityacidityfertilityturbiditysalinity
The ocean's hydrogen ions rise with an increase in dissolved CO2 concentration.
In what ways is concentration measured?It is possible to describe the mass of a solute in a given volume or the number of moles of a solute in a given volume when describing the concentration of a solute in a solvent. These are essentially conversion factors that establish the molecular mass or equivalent mass of a solute in relation to the volume of a solution.
The importance of concentrationYou can use your resources more wisely and address issues more successfully when you're focused. The likelihood that you may overlook crucial information decreases while you are focused. You'll remember information more quickly if you maintain concentrate.
To know more about Concentrarion visit:
https://brainly.com/question/13197724
#SPJ4
What Is The Strongest Acid Among The Following? A) H2S B) HCI C) H20 D) HF
The HCl acid is stronger than all of the following because chlorine atom is more electronegative.
HCl is a sturdy acid as it dissociates nearly completely. By contrast, a susceptible acid like acetic acid (CH3COOH) does now no longer dissociate properly in water – many H+ ions stay bound-up inside the molecule. In summary: the more potent the acid the extra loose H+ ions are launched into solution.
HCl is a more potent acid than HF due to the fact fluorine is extra electronegative than chlorine.H2S is extra acidic than water due to the fact OH bonds are more potent than SH bonds. Sulfur is likewise large than oxygen, in order that allows stabilize the SH− anion relative to OH.
Read more about acid:
https://brainly.com/question/25148363
#SPJ4
below is the lewis structure of the chlorine molecule. count the number of bonding pairs and the number of lone pairs around the left chlorine atom.
10 electrons, no lone pairs In the Lewis structure, each line represents a bond that holds a pair of electrons. Two single bonds and one triple bond each have 10 shared electrons.
How does the Lewis structure rule work?Because they always occur at the extremities of a chain of atoms, hydrogen atoms can only form single bonds. With carbon, nitrogen, or oxygen, hydrogen is frequently linked. Only O2, O3, superoxides, and peroxides are exceptions to the rule that oxygen atoms do not normally connect to one another.
How would you define the Lewis structure using an example?The idea of the octet rule, in which atoms share electrons so that each has eight electrons in its outer shell, is the foundation of a Lewis structure. The outer shell of an oxygen atom, for instance, has six electrons.
To know more about Lewis structure visit:
https://brainly.com/question/20300458
#SPJ4
enter the complete molecular equation that demonstrates how this buffer neutralizes added acid (hcl)(NaOH) .
The salt solution has served as a buffer system, preventing pH changes caused by the addition of acid or base to the solution.
Since the hydrogen ion is a component of the acid, it reacts with the base to produce salt, which prevents the pH from changing too much.
The buffer solution's acid addition has been specified as:
[tex]HCl +NH_{3} > > > NH_{4} Cl[/tex]
To prevent the pH from changing, the base addition to the buffer combines with the acid component to create salts.
Following are the instructions for adding the base, NaOH, to the buffer solution:
[tex]NaOH + NH_{4} ^{+} > > > > > Na^{+}+ NH_{3}+ H_{2}O[/tex]
A buffer solution is an aqueous mixture of a weak acid and either its conjugate base or the base itself. When a modest amount of a strong acid or base is applied to it, the pH hardly changes at all.
For more information on buffer solution kindly visit to
https://brainly.com/question/15709146
#SPJ4
According to Le Châtelier's principle, how will an increase in pressure affect a gaseous equilibrium system?
Shift it toward the products
Shift it toward the reactants
Shift it toward the side with higher total mole concentration
Shift it toward the side with lower total mole concentration
Answer:
Shift it toward the side with lower total mole concentration
Explanation:
Le Châtelier's principle states that if there is a change in conditions (for example pressure, temperature) to a closed system in dynamic equilibrium, the equilibrium will shift to minimise the change.
Pressure is caused by the collision of gas molecules. The more molecules there are, the greater the pressure so the system must reduce in pressure to counteract the increase in pressure and restore equilibrium. It does this by shifting to the side with lower total mole concentration to decrease the pressure again.
he given reaction takes place in acidic conditions under rigorous heating. complete the reaction mechanism, adding missing atoms and lone pairs, charges, and curved arrows as necessary. ignore hydrogen sulfate in steps 2 and 3. the starting material consists of a 5 carbon ring fused to a 4 carbon ring via a carbon. on the adjacent carbon on the 5 carbon ring is a hydroxy substituent. this reacts with h 2 s o 4 and heat to give two five carbon rings fused through a double bond between carbons 1 and 2. step 1: draw curved arrows.
The carbonile subtracts a H atom from the HCl in the initial step. The OH+ will then transfer the charge to the carbon, which is tertiary and readily stabilized, via resonance. After that, the chlorine subtracts a hydrogen atom to create a stable double bond on the charged carbon. Now, this combines with a second benzaldehyde molecule, and the result is a condensation product.
What is optimization for heat?Depending on their intended use, heat exchangers are optimized. The minimum initial cost, minimum operating cost, maximum efficiency, minimal pressure drop, minimal heat transfer area, minimal weight, or material are the most frequently used optimization criteria for heat exchangers.
What is the heat plan of action?The heat model is a behavioral approach that can be used to deal with complaints. It seeks to calm down and defuse the complainants' anger while, whenever possible, focusing on finding a solution to the problem or issue.
To know more about atom visit :-
https://brainly.com/question/13654549
#SPJ4
Can someone help me answer these questions? giving brainliest 50 point!!!
