gaseous methane ch4 will react with gaseous oxygen o2 to produce gaseous carbon dioxide co2 and gaseous water h2o. suppose 14. g of methane is mixed with 39.0 g of oxygen. calculate the minimum mass of methane that could be left over by the chemical reaction. round your answer to 2 significant digits.

The property of base is soapy to touch. It is good conductors of electricity. It also liberates heat on dilution. So, all the given statements are correct.

We can identify physical as well as chemical properties of bases. Physical properties are those that can be identified by our sense organs. We can touch, see, smell, or feel these physical properties and identify them. The physical properties of bases are: they are bitter in taste; they are soapy or slippery to touch; and they turn red litmus blue.

Meanwhile, the chemical properties of the bases are: they react with acids to form salt and water; they react with metal and liberate hydrogen gas; some conduct electricity but only in aqueous state; they are not very good conductors in solid state; they produce hydroxide ions in solution; and they liberate ions and heat on dilution.

Learn more about property of base at: https://brainly.com/question/24181314

#SPJ4

In this reaction, the water is considered a base.

When ammonia molecules react with water, they form a solution that contains ammonium ions and hydroxide ion.

In this reaction, water will act as a base.This is because it is accepting hydrogen ions from the ammonia molecules and reacting with them to form a solution that contains both ammonium and hydroxide ions.

This is an example of a neutralization reaction, where an acid and a base react to form a neutral solution.

The water is classified as a reactant, as it is consumed and converted into the product solution.

To learn more about base, click here:

https://brainly.com/question/13773045

#SPJ4

There are 29 protons and 33 neutrons in the nucleus of Cu-62.

Let us remind ourselves that the number of neutrons that is contained by different atoms of the same element is not the same. Hence, atoms of the same element would have atoms that have the same atomic number but do not have the same number and we call these different  atoms the isotopes of the element.

We know that there are different isotopes of copper and they differ in the number of the particles that can be found in the nucleus of each of the isotopes that we have in the compound.

In this case, we have an isotope has been identified as Cu-62. We know that the atomic number of copper is 29 hence there are 29 protons in the nucleus an the number of the neutrons would then be 62 - 29 = 33 neutrons.

Learn more about isotopes:https://brainly.com/question/11680817

#SPJ1

Partial pressure of the gas B is 0.23 atm.

Let us note that if there is a mixture of gases that can be found in a particular vessel then we must know that each of the gases that are there would exert its own pressure on the walls of the container.

Now we know that the total number of moles that is present =

2.5 + 1.2 + 1.0 = 4.7 moles. The total pressure of the gases that we have in the system is about 0.9 atm.

We know that;

Partial pressure = Mole fraction * Total pressure

Partial pressure of B is;

1.2/4.7 * 0.9

= 0.23 atm

Learn more about partial pressure:https://brainly.com/question/13199169

#SPJ1

metal speaking, aluminum is a 13-atomic-number chemical with the symbol Al. The density of aluminum is about lower than that of other common metals.

Hard, lustrous, pliable, fusible, and ductile are all characteristics of metal, a solid material that conducts heat and electricity. The materials that have a propensity to donate electrons are metals. They have an electropositive makeup. Natural substances referred to as non are brittle and metabolically and electrically inert  elements in the chemical elements are water, carbon, nitrogen, oxide, phosphorus, arsenic, and selenium.

Components Make Up Metals The atomic components of metals include electrons, neutrons, and protons. The quantity of protons in an atom can be used to identify it from an atom of another element. About 25% of a earth's crust is made up of metals. Metal is any of a group of substances with strong thermal and electrical conductivity, malleability, flexibility, and high light reflection.

To know more about metal visit :

https://brainly.com/question/29404080

#SPJ4

A chunk of copper with a mass pf 95.4 g will increase in temperature from 25 °C to 48 °C when exposed to 849 J of heat.

This formula explains how a substance's ability to absorb heat and its subsequent change in temperature are related to one another. In your case, you are conscious that a sample of iron weighing 95.4 g heats up from 25 to 48 C after absorbing 849 J of heat.

Copper, much like most metallic elements, only reacts with oxygen from the air. When heated, a layer of black copper oxide forms on it: This experiment could be used as an illustration.

To know more about copper visit:

https://brainly.com/question/13677872

#SPJ4

1. Look for neighboring atoms and determine which carbon is connected to a hydrogen atom. The carbon connected to the hydrogen atom is the alpha carbon.

Atom is an open-source, cross-platform code editor developed by GitHub. It is a hackable text editor for the 21st century, built on Electron, and based on everything developers love about Sublime Text, Visual Studio Code, and more. Atom is designed to be a tool for developers, with many features and packages for customizing the interface, editing code, and debugging code. It is also designed to be customizable and extensible, allowing developers to create their own packages and themes for Atom, as well as use existing packages and themes from the community.

2. Look for the presence of a nitrogen atom in the neighboring atoms. The carbon atom connected to the nitrogen is usually the alpha carbon.

To learn more about atom
https://brainly.com/question/28639692
#SPJ4

Answer:

Knowing chemistry can help you make decisions

Answer:

1 ) chemistry plays a role in the manufacturing of medicines

2 ) chemistry plays a role in the production of cosmetics

3 ) chemistry plays a role in the production of soaps and detergents

4 ) chemistry is used to manufacture construction materials

5 ) chemistry allows us to use fuels

6 ) chemistry is important in agriculture ( providing fertilizers ... )

7 ) chemistry is important in textiles

Figure (1) is erroneous because adenine (A) is triple hydrogen bonded to thymine (T), whereas guanine (G) and cytosine (C) are double hydrogen bonds. Figure (2) is valid since both base pairs are arranged correctly.

In nucleic acids, purine bases form hydrogen bonds with pyrimidine bases in a precise way known as base pairing. Adenine forms double hydrogen bonds with thymine. Cytosine forms triple hydrogen bonds with guanine. A dinucleotide is now a nucleotide compound made up of two nucleotides. As a result, each nucleotide unit is made up with one nucleobase, one pentose moiety, as well as phosphoric acid. Nucleotides are organic compounds made up of a nucleoside as well as a phosphate.

They function as monomeric units of a nucleic acid polymers deoxyribonucleic acid (DNA) & ribonucleic acid (RNA), both of which are crucial macromolecules for all life on Earth. Nucleotides are received from meals and are also produced by the liver from common components. Nucleotides are made up of three component molecules: a nucleobase, a sugar with five carbons (ribose or deoxyribose), and just a phosphate group with one to three phosphates. Nucleotides also play an important role in metabolism at the cellular level.

To know more about the Dinucleotide , here

https://brainly.com/question/30035116

#SPJ4

The relationship between the reaction quotient, electrochemical cell potential, temperature, and standard cell potential is established by the Nernst equation formula. Ecell equals E0 less (RT/nF) lnQ.

The Nernst equation, a chemical thermodynamical relationship, is used in electrochemistry to determine a reaction's reduction potential from the standard electrode potential. The Nernst equation relates an atom's or ion's ability to absorb one or more electrons (reduction potential) measured under any conditions to that measured under standard conditions (standard reduction potentials) of 298 K and one molar or one atmospheric pressure. The relationship between the reaction quotient, electrochemical cell potential, temperature, and standard cell potential is established by the Nernst equation formula. Ecell equals E0 less (RT/nF) lnQ. Under unusual circumstances, the potential of the electrochemical cells can be determined using the Nernst distribution law.

Here,

The solution and the table is in image.

The Nernst equation formula establishes a relationship between the reaction quotient, electrochemical cell potential, temperature, and the standard cell potential. Ecell = E0 – (RT/nF) lnQ.

To know more about Nernst equation,

https://brainly.com/question/13043546

#SPJ4

A molecule's atoms are held together by shared electrons. This is known as a covalent bond. In a covalent bond, atoms share one or more electrons in order to fill their outermost electron shell, also known as valence shell.

This forms a stable electron configuration and creates a bond between the atoms. The sharing of electrons creates an electrostatic attraction between the positively charged nucleus of one atom and the negatively charged electrons of another atom. This attraction creates the chemical bond that holds the atoms together in a molecule.A neutron is a subatomic particle that is found in the nucleus of an atom. It has no electric charge and a slightly larger mass than a proton.

Learn more about atom here:

https://brainly.com/question/1566330

#SPJ4

Periodic trends affect bonding, because of how the elements are arranged on the periodic table. Bond forming between two elements depends on electronegativities of the elements.

Their total quantity of valence electrons is what decides whether or not two atoms will join together to create a molecule. The electrons known as valence electrons orbit at the atom's highest possible energy level. The majority of atoms require eight valence electrons to be stable and unreactive.

We can determine if a given bond will be non-polar, polar covalent, or ionic using the Electronegativity. The bond is more polar the bigger the difference in electronegativity. The polarity of the following bonds should be in ascending order: H-H, O-H, Cl-H, S-H, and F-H.

learn more about periodic trend here:

brainly.com/question/30100573

#SPJ4

Answer:

The correct answer is a. C5H5N5

Explanation:

The empirical formula of a compound is the simplest whole number ratio of the atoms of each element in the compound. In this case, the empirical formula of the compound C5H5N5 is C5H5N5, which is the simplest whole number ratio of the atoms of carbon, hydrogen, and nitrogen in the compound.

A one-color method of applying light cured gels is typically used when only a single layer of gel is needed. For example, if a technician is performing a simple overlay or sculpting nails.

A two-color method for applying light-cured gels is typically used when layering or creating a gradient effect is desired. For example, if a technician is performing a French manicure or creating an ombre effect, a two-color method would be more appropriate. This method allows for more precise control over the application of the gel and can create more intricate designs.

In summary, one-color method is used for simple overlay and sculpting nails, whereas two-color method is used for creating gradient effect, layering and more intricate designs.

Learn more about gradient effect here:

https://brainly.com/question/28480537

#SPJ4

The concentration of the acid solution At the 0 mL =2.79 35 ml of a hydrochloric acid solution is titrated with 0.100 m naoh.

Hydrochloric acid (HCl) is commonly used for the neutralization of alkaline agents, as a bleaching agent, in food, textile, metal, and rubber industries. It is neutralized if released into the soil and it rapidly hydrolyzes when exposed to water.

Skin exposure to low concentrations of hydrogen chloride gas or hydrochloric acid causes erythema and inflammation of the skin whereas high concentrations can cause severe chemical burns to the skin and mucous membranes.

To know more about hydrochloric visit

https://brainly.com/question/18861540

#SPJ4

The type of proton in a molecule is referred to as a nuclear magnetic resonance (NMR) active proton. These protons possess a magnetic moment and can be observed in NMR spectroscopy, which is a powerful analytical tool for determining the structure of organic molecules. The chemical shift of the NMR active protons in a molecule depends on their electronic and magnetic environment, which can be used to identify the specific type of proton and the chemical groups it is associated with.

Learn more about molecule, here https://brainly.com/question/19922822

#SPJ4

The value of Q in a reaction mixture containing just reactants is 0. Thus, the correct answer is D.

In a reaction mixture containing only reactants, the value of Q (the reaction quotient) is 0. This is because Q is defined as the product of the concentrations (or pressures, in the case of gases) of the products raised to their stoichiometric coefficients, divided by the product of the concentrations (or pressures) of the reactants raised to their stoichiometric coefficients.

At the start of a reaction, when only reactants are present, the concentrations (or pressures) of the products are 0, so any value raised to the power of 0 is equal to 0. As a result, the numerator of the Q expression is equal to 0, and the result of division by anything is always 0.

Learn more about reaction mixture here: brainly.com/question/28381849

#SPJ4

After 0.015 mol of NaOH is added to the original buffer, the solution's pH is 4.8.

A homogenous combination involving two or more materials with particles of less than one nm is referred to as a solution. Solutions come in many forms, including soda water, salt and sugar solutions, and others. Every element in a solution appears as a single wave.

When we know that Ka Equals 1.8 x 10⁻⁵, we may utilize it to calculate Pka.

by using this formula:

Pka = -㏒Ka

      = -㏒(1.8 x 10⁻⁵)

      = 4.7

Now, after we have got the Pka we need now to get moles of NaC₂H₃O₂ and

Moles of HC₂H₃O₂:

When moles of NaOH = 0.015 moles

When moles NaC₂H₃O₂ after adding NaOH                                  

                                        = initial mol NaC₂H₃O₂ + mol NaOH

 ∴moles NaC₂H₃O₂      = 0.1 + 0.015 = 0.115 moles

And moles HC₂H₃O₂ after adding NaOH

                                        = initial mol HC2H3O2 - mol NaOH

∴ moles HC2H3O2        = 0.1 - 0.015 = 0.085 moles

So, when we have moles [HC2H3O2] &[NaC2H3O2] so we can substitution its values in [A] &[HA] :

By using H-H equation we can get the PH:

When PH = Pka + ㏒[A]/[HA]

Ph = 4.7 + ㏒0.115/0.085

     = 4.8

To know more about Solution visit:

https://brainly.com/question/25326161

#SPJ4

The complete question is-

The products formed in the reaction of excess benzene with isobutyl chloride + AlCl₃ is  tert-Butylbenzene (major)and Isobutyl benzene (minor). The reaction is attached below.

Reactants are the building blocks of chemical reactions, and the substances that are produced are known as the products of a reaction. Chemical reactions can be represented by the standard chemical formula: reaction products. Bonds break and reform during chemical reactions. Additionally, the reaction's opposite result occurs.

During this electrophilic substitution process. Benzene attacks the electrophile created and replaces it with H. The generated electrophile, a primary carbocation, is less stable, as seen in the attached image. This primary carbocation undergoes a proton shift to reorganize into a tertiary carbocation. Consequently, trans-butylbenzene is listed as a major product.

To know more about chemical reactions visit:

https://brainly.com/question/26134576

#SPJ4

The exact measurement is E. 1300 calories, which is the amount of energy required to raise 32 g of liquid to 12 °C into 54 °C. the range of 12 to 54 °C for 32 g of water.

In 32 gallons of water, how many electrons are there?

Answer and justification We are aware that a substance has 6.022 x 1023 molecules in 1 mole (Avogadro number). Therefore, 10.651023 molecules are present in 32 grams of water. 10.65 10 23 molecular units.

That many calories are required to warm up one gram of water?

hundred calories

The amount of heat required to increase the temperature of one grams (0.001 liters) of fresh water is measured in calories the boiling point of 100 °C.

To know more water  about :

https://brainly.com/question/28465561

SPJ4

The exact measurement is E. 1300 calories, which is the amount of energy required to raise 32 g of liquid to 12 °C into 54 °C.

We are aware that a substance has 6.022 x 1023 molecules in 1 mole (Avogadro number). Therefore, 10.651023 molecules are present in 32 grams of water. 10.65 10 23 molecular units.

Hundred calories The amount of heat required to increase the temperature of one grams (0.001 liters) of fresh water is measured in calories the boiling point of 100 °C.

To know more water  about :

https://brainly.com/question/1216922

#SPJ4

The answer is 24, and it does not need to be rounded as it's already in standard notation.

The first problem is 0.004911/3.87 = 0.001268. So the answer should be 0.00127. The second problem is 4 x 6 = 24. Standard notation is a way of writing numbers in a standardized format. It involves writing numbers in a way that includes a number, a decimal point, and a set of digits to the right of the decimal point. The number of digits to the right of the decimal point represents the precision of the number. In scientific notation, numbers are written as a coefficient multiplied by a power of 10.

Learn more about standard notation here:

https://brainly.com/question/10253124

#SPJ4

The first reaction is,

Each of the following reactions is catalyzed by an enzyme. For each reaction, classify the enzyme according to one of the six main classes suggested by the International Union of Biochemistry.

(Image attached to the end of the solution)

in first reaction HYDROLASE enzyme as clearly, it is a hydrolysis reaction

in 2nd reaction OXIDOREDUCTASE is the answer as it is a reduction reaction

Reduction, any of a class of chemical reactions in which the number of electrons associated with an atom or a group of atoms is increased. The electrons taken up by the substance reduced are supplied by another substance, which is thereby oxidized.

REDUCTION can be identified as:

* Removal of oxygen

* Addition of hydrogen

* Decrease in valency of metal ion[tex](e.g.[/tex] [tex]$\mathrm{Fe}+2$[/tex][tex]? $\mathrm{Fe}+3)$[/tex]

and the last one is clearly isomers of each other hence ISOMERASE.

For more such question on Catalyzed enzyme:

https://brainly.com/question/27950063

#SPJ4

Answer: 1.86 L of oxygen is required to completely combust 0.452 L of propane at STP.

In order for lights to change material, it needs to interact with electrons, causing electrons to absorb or release energy, thus causing a change in the material. In simple words, refraction is needed

Its four quantum numbers for the eighth oxygen atom electron are n=2, l=1, m=+1 or 1, s=+21 or 21.

chemical attributes.The electronic configuration of the oxygens in its quantum theory ground state is 1s22s22p4.The ground state atoms is in a 3P state, which is an electron-spin sequence of three with a spin number of one (S = 1) and an orbital quantum angular momentum number of one (L = 1).

The primary, azimuthal, magnetic, and spin atomic numbers are the four types of quantum numbers.Quantum numbers provide the values of a quantum system's preserved quantities.

To know more about oxygen atom visit:

brainly.com/question/29695801

#SPJ4

Arachidonic acid is crucial as a precursor for the manufacture of the eicosanoid signalling molecules, and ethanolamine is included as a polar head in the phospholipid phosphatidylethanolamine.

What are the uses of ethanolamines?

A starting material for the production of surfactants, complexing agents, and even medications, ethanolamine also serves as an agent for soften leather and as a "scrubber" to remove dioxide, hydrogen sulphide, and other acidic contaminants from waste gas streams.

What other name would you give ethanolamine?

To distinguish it from ammonia (DEA) and triethanolamine, ethanolamine is frequently referred to as monoethanolamine or MEA (TEA). It serves as a feedstock for the manufacture of medicines, corrosion inhibitors, polishes, detergents, emulsifiers, and chemical intermediates.

To know more about ethanolamine visit:

https://brainly.com/question/16751512

#SPJ4

The premise behind this problem is that if the thermal decomposition also yields 34.5 g of sodium, you must utilise the stated mass ratio to calculate how much fluoride will be produced.

What the body does with sodium?

Sodium is a vital component that the body needs in very tiny amounts to keep bodily fluids in balance, keep nerves and muscles functioning properly, and to prevent excessive perspiration. The majority of Americans consume too much of it, and they might not even be aware of it.

What are sodium's five uses?

5Uses. Titanium, sodamide, sodium cyanide, sodium peroxide, & sodium hydride are all made from sodium. Nuclear reactors have used liquid sodium as a coolant in the past. Streetlights use sodium vapour, which emits a dazzling yellow light.

To know more about sodium visit:

https://brainly.com/question/29327783

#SPJ4

The mass of 6.89 x 10²⁵ molecules of CO₂ will be  approximately 0.5068 kg.

To find the mass in kilograms of 6.89 x 10²⁵ molecules of CO₂, you can use the formula:

mass (kg) = (number of moles) x (molar mass in g/mol) / (1000 g/kg)

First, convert the number of molecules to moles by dividing by Avogadro's number (6.02 x 10²³mol⁻¹) :

6.89 x 10²⁵ CO₂ molecules / 6.02 x 10²³mol⁻¹ = 11.46 x 10² mol

Then, use the molar mass of CO₂ (44.01 g/mol) to find the mass in grams: 11.46 x 10²mol x 44.01 g/mol = 506.8 x 10² g

Finally, convert the mass in grams to kilograms by dividing by 1000 g/kg: 506.8 x 10² g / 1000 g/kg = 0.5068 kg

So, the mass of 6.89 x 10²⁵molecules of CO₂ is approximately 0.5068 kg.

To know more about Avogadro's number, visit:

https://brainly.com/question/28812626

#SPJ4

The empirical formula of the compound is option a.) MgO

The empirical formula of a compound represents the smallest whole number ratio of atoms in a molecule of that compound.

To determine the empirical formula, we need to know the number of moles of each element present in the compound. We can calculate the number of moles by dividing the mass of each element by its molar mass.

Magnesium (Mg) has a molar mass of 24.31 g/mol

Oxygen (O) has a molar mass of 16.00 g/mol

Given that we have 0.6 g of Magnesium and 0.4 g of Oxygen, we can calculate the number of moles of each element as follows:

Magnesium: 0.6 g / 24.31 g/mol = 0.02466 mol

Oxygen: 0.4 g / 16.00 g/mol = 0.025 mol

Now we can find the ratio of atoms of each element in the compound. In order to do that, we divide the number of moles of each element by the smallest number of moles.

Magnesium: 0.02466 mol / 0.02466 mol = 1

Oxygen: 0.025 mol / 0.02466 mol = 1.01

The numbers obtained are not whole numbers, but they are very close to 1, which means the ratio of atoms is close to the ratio of moles, and the empirical formula of the compound is MgO.

Therefore the answer is (a) MgO.

Learn more about Empirical Formula here: https://brainly.com/question/14044066

#SPJ4

Answer: It represents a synthesis reaction because the same atoms are present in the reactants and products.

Explanation:

The picture shows two reactants ZX and Y are forming a product XY and another reactant XY forming another product Z. The product and the reactants have the same atoms. This is a characteristic of a synthesis reaction, where two or more reactants combine to form a single product.

I hope this helps :)

To solve this we must be knowing each and every concept related to chemical reaction. Therefore, the correct option is option C among all the given options.

A chemical reaction is a process that converts one or more compounds, known as reactants, into one or more distinct substances, known as products.

Chemical elements and compounds are examples of substances. A chemical reaction reconfigures the component atoms of both the reactants to produce various products.

The illustration portrays two reagents ZX and Y generating a product XY as well as another reactant XY producing a product Z. The atoms in the product as well as the reactants are the same. This is a synthesis reaction feature in which two or even more reactants unite to generate a single product.

Therefore, the correct option is option C.

To know more about chemical reaction, here:

https://brainly.com/question/29039149

#SPJ2