[tex]$|XY|$[/tex] is the longest side and we used this to find[tex]$\cos\theta$[/tex] using the cosine rule. We then used a calculator to find the value of [tex]$\theta[/tex]$. Thus, [tex]$\angle Z \[/tex] approx [tex]66.74^{\circ}$[/tex].Conclusion: The angle [tex]angle Z is $\approx 66.74^{\circ}$[/tex]
Given that triangle[tex]$XYZ[/tex]$ is an obtuse-angled triangle with [tex]$|YZ| = 4.73 mm$[/tex] and [tex]$|XZ| = 3.70 mm$[/tex] and [tex]\angle Y = 42^{\circ}$,[/tex] we need to find [tex]$\angle Z$[/tex].
Let [tex]$\angle Z = \theta$[/tex].
In triangle [tex]$XYZ[/tex] , we can use the cosine rule to find[tex]$|XY|$.$$|XY|^2 = |XZ|^2 + |YZ|^2 - 2|XZ||YZ|\cos\angle Y$$$$|XY|^2 = (3.70)^2 + (4.73)^2 - 2(3.70)(4.73)\cos 42^{\circ}$$$$|XY|^2 \approx 9.952$$[/tex]
Since [tex]$\triangle XYZ$[/tex] is obtuse-angled, [tex]$\angle Z$[/tex] is an obtuse angle. We know that in an obtuse triangle, the largest side is opposite to the largest angle.
So, [tex]\angle Z > 90^{\circ}$ and $|XY|$[/tex] is the longest side of[tex]$\triangle XYZ$[/tex].
Thus, [tex]$\cos\theta = \frac{|XY|^2 + |XZ|^2 - |YZ|^2}{2|XY||XZ|}$[/tex]Substituting the values we get[tex],$$\cos\theta = \frac{9.952 + (3.70)^2 - (4.73)^2}{2(3.70)(\sqrt{9.952})}$$$$\cos\theta \approx 0.409$$[/tex]
Using a calculator we get,[tex]$\theta \approx 66.74^{\circ}$Therefore, $\angle Z = \boxed{66.74^{\circ}}$[/tex]
Using the cosine rule, we first found the length of the longest side [tex]$|XY|$[/tex] which is [tex]$\approx 9.952$[/tex]. Since [tex]$\triangle XYZ$[/tex] is an obtuse-angled triangle, we know that [tex]$\angle Z$[/tex] is an obtuse angle and the longest side is opposite to the largest angle. .
To know more about angle visit:
brainly.com/question/13954458
#SPJ11
Use Synthetic Division to determine if 2 is a zero of this polynomial. If not, determine p(2). p(x)=11x 4
−26x 3
−6x 2
+34x−12 No, k=2 is not a zero, p(2)=4 No, k=2 is not a zero, p(2)=−4 Yes, k=2 is a zero of the polynomial. No, k=2 is not a zero, p(2)=−3 No, k=2 is not a zero, p(2)=8
According to the question the correct statement is: No, [tex]\(k = 2\)[/tex] is not a zero, [tex]\(p(2) = 4\)[/tex] and [tex]\(k = 2\)[/tex] is not a zero of the polynomial.
To determine if [tex]\(k = 2\)[/tex] is a zero of the polynomial [tex]\(p(x) = 11x^4 - 26x^3 - 6x^2 + 34x - 12\),[/tex] we can use synthetic division.
Using synthetic division with [tex]\(k = 2\),[/tex] we have:
[tex]\[2 & 11 & -26 & -6 & 34 & -12 \\\Matrix & & 22 & -8 & -28 & 12 \\\][/tex]
The remainder is [tex]\(12\)[/tex], not zero. Therefore, [tex]\(k = 2\)[/tex] is not a zero of the polynomial.
To find [tex]\(p(2)\)[/tex], we can substitute [tex]\(x = 2\)[/tex] into the polynomial:
[tex]\[p(2) = 11(2)^4 - 26(2)^3 - 6(2)^2 + 34(2) - 12 = 4\][/tex]
Therefore, [tex]\(p(2) = 4\).[/tex]
Hence, the correct statement is: No, [tex]\(k = 2\)[/tex] is not a zero, [tex]\(p(2) = 4\).[/tex]
To know more about polynomial visit-
brainly.com/question/29715449
#SPJ11
what special marks are used to show that segments are congruent
The special marks that are used to show that segments are congruent is a double bar with an equals sign on top. "≅"
What is congruent?Congruent is used when two objects or segment have same size or shape. It's is often used in the field of geometry in which two given figures have similar shape or size.
When two angles or segment are the same in size, they're said to be congruent.
Congruent can be illustrated thus, if segment AB is congruent to segment CD, this would be written as
AB ≅ CD
Therefore, when this symbol "≅" is used, it indicates that the two segments have the same length and are therefore congruent.
Learn more on congruent on https://brainly.com/question/31894876
#SPJ1
How many ways can the letters in the word COMPUTER be arranged in a row? b. How many ways can the letters in the word COMPUTER be arranged if the letters CO must remain next to each other (in order) as a unit? c. If letters of the word COMPUTER are randomly arranged in a row, what is the probability that the letters CO remain next to each other (in order) as a unit?
a) There are 40,320 ways the letters in the word "COMPUTER" can be arranged in a row without any restrictions. b) There are 1,440 ways the letters in the word "COMPUTER" can be arranged if the letters "CO" must remain next to each other (in order) as a unit. c) The probability that the letters "CO" remain next to each other (in order) as a unit when the letters of the word "COMPUTER" are randomly arranged is approximately 3.57%.
a. To determine the number of ways the letters in the word "COMPUTER" can be arranged in a row without any restrictions, we can use the concept of permutations.
The word "COMPUTER" has 8 letters. Therefore, there are 8 positions to fill. The first position can be filled with any of the 8 letters, the second position can be filled with any of the remaining 7 letters, the third position with any of the remaining 6 letters, and so on.
So, the total number of ways the letters can be arranged in a row without any restrictions is given by 8 factorial (8!).
8! = 8 x 7 x 6 x 5 x 4 x 3 x 2 x 1 = 40,320.
Therefore, there are 40,320 ways the letters in the word "COMPUTER" can be arranged in a row without any restrictions.
b. If the letters "CO" must remain next to each other (in order) as a unit, we can consider "CO" as a single entity or a block. So, we have 7 entities to arrange: "CO", "M", "P", "U", "T", "E", and "R".
Within the block "CO", the two letters can be arranged in 2 factorial (2!) ways (either "CO" or "OC"). The remaining 6 entities can be arranged in 6 factorial (6!) ways.
Therefore, the total number of ways the letters can be arranged with "CO" together as a unit is given by (2!) x (6!).
(2!) x (6!) = 2 x 720 = 1,440.
There are 1,440 ways the letters in the word "COMPUTER" can be arranged if the letters "CO" must remain next to each other (in order) as a unit.
c. To calculate the probability that the letters "CO" remain next to each other (in order) as a unit when the letters of the word "COMPUTER" are randomly arranged, we need to determine the favorable outcome and the total number of possible outcomes.
The favorable outcome is the number of ways the letters can be arranged with "CO" together as a unit, which we found to be 1,440 in part (b).
The total number of possible outcomes is the number of ways the letters can be arranged without any restrictions, which we found to be 40,320 in part (a).
Therefore, the probability is given by the favorable outcome divided by the total number of possible outcomes:
Probability = Favorable Outcome / Total Number of Outcomes
Probability = 1,440 / 40,320
Probability ≈ 0.0357 or 3.57%
So, the probability that the letters "CO" remain next to each other (in order) as a unit when the letters of the word "COMPUTER" are randomly arranged is approximately 3.57%.
For more about probability:
brainly.com/question/31828911
#SPJ4
find the cube of 2x+1/3x
Answer:
Step-by-step explanation:
(2x + 1/3x)³
= (7/3x)³
= 343/27 x³
Compute the coefficients for one Taylor series for the following function about tha given point a and then use the first four terms of the Series do approximate the given number f(x)= 3
x
with a=64; approximate 3
63
first term is second term is 2 3rd term is 4 th term is 3
63
≈
Using the first four terms of the Taylor series expansion of f(x)= ∛x about a=8, we can approximate ∛5 as 1591/864.
To compute the coefficients for the Taylor series of the function f(x)= ∛x with a=8
we can use the formula for the coefficients of the Taylor series expansion:
Cₙ=fⁿa/n!
where fⁿa represents the nth derivative of f(x) evaluated at x=a.
Let's calculate the first few derivatives of f(x):
f(x)= ∛x
[tex]f'(x)=1/3x^{-2/3}[/tex]
[tex]f''(x)=-2/9x^{-5/3}[/tex]
[tex]f'''(x)=10/27x^{-8/3}[/tex]
Now, let's evaluate these derivatives at x=8:
f(8)=2
f'(8)=1/12
f''(8)=-1/54
f'''(8)=5/216
Using the formula for the coefficients, we have:
c₀=f(8)/0!= 2
c₁=f'(8)/1! = 1/12
c₂=f''(8)/2! = -1/108
c₃= f'''(8)/3! = 5/2592
Therefore, the Taylor series expansion of f(x) about a=8 is given by:
f(x)=2+1/2(x-8)-1/108(x-8)²+5/2592(x-8)³+...
To approximate ∛5 using the first four terms of this series, we substitute x=5 into the series:
f(5)=2+1/2(5-8)-1/108(5-8)²+5/2592(5-8)³+...
Simplifying the expression, we can approximate ∛5 as
∛5 = 2-1/4+9/432-45/7776
Simplifying the expression:
∛5=1591/864
To learn more on Taylors series click:
https://brainly.com/question/31140778
#SPJ4
Find all points on the curve y=3tanx,−π/2
We can say that the all points on the curve [tex]y = 3tan(x)[/tex] in the interval [tex][−π/2, π/2][/tex] are
[tex]x = −π/6, π/6, π/2[/tex], and the corresponding y values are
[tex]y = 3√3, −3√3[/tex], undefined respectively.
We are required to find all points on the curve [tex]y = 3tan(x)[/tex] in the interval [tex][−π/2, π/2][/tex]. As we know that tan(x) is not defined at [tex]x = π/2 + nπ[/tex] where n is any integer. Thus, in the interval [tex][−π/2, π/2][/tex], the curve has vertical asymptotes at
[tex]x = −π/2 + nπ[/tex], for all integers n. The values of x which do not satisfy this condition will lie on the curve. Thus, the required points on the curve will be all values of x in the interval [tex][−π/2, π/2][/tex] excluding [tex]−π/2 + nπ[/tex] where n is any integer.
So, we can say that the required points on the curve [tex]y = 3tan(x)[/tex] in the interval [tex][−π/2, π/2][/tex] are:
[tex]x = −π/6, π/6, π/2[/tex] or in radians, and the corresponding y values will be
[tex]y = 3√3, −3√3[/tex], undefined respectively. Hence, we can say that the all points on the curve
[tex]y = 3tan(x)[/tex] in the interval [tex][−π/2, π/2][/tex] are
[tex]x = −π/6, π/6, π/2[/tex], and the corresponding y values are
[tex]y = 3√3, −3√3[/tex], undefined respectively.
To know more about points visit:-
https://brainly.com/question/32083389
#SPJ11
above the paraboloid z=x 2
+y 2
and below the paraboloid z=8−(x 2
+y 2
) (15 points) Evaluate the integral ∬ R
3xydA where R is the region bounded by: x−2y=0,
x+y=4,
x−2y=−4,
x+y=1
using the following change of variables: x= 3
1
(2u+v)y= 3
1
(u−v)
Given region R is bounded by x − 2y = 0, x + y = 4, x − 2y = −4, x + y = 1, Hence, the correct option is 7/4.
For the given region, let's write the inequalities by finding the corner points of the region: At x - 2y = 0
=> y = x/2
On x + y = 4
=> y = 4 - x
Thus x - 2y = -4
=> y = (x+4)/2
On x + y = 1 '
=> y = 1 - x
The corner points are (0, 0), (2, 1), (0, 2), (-4, 2)
Now we will perform the variable transformation which is given by x= 3(2u+v) and y= 3(u-v).
The Jacobian of the transformation is found by taking the determinant of the following matrix which is equal to 9.
| 3(2u+v) 3(u-v) | | 6 3 | = 9
Let, u = (x/3 + y/3) and v = (-x/3 + y/3)
Now we can express the region R in terms of u and v in the following way: At u = 0, 2;
v = -u + 4At
u = 0, -2;
v = u+4
Thus we can express the region R as: 0 ≤ u ≤ 2, -u+4 ≤ v ≤ u+4
Now let us transform the function f(x, y) = 3xy to F(u, v)
The new function is: F(u,v) = 3(9/4)(2u+v)(u-v)
F(u,v) = (27/2)u² - (27/4)v² - (27/2)uv
The integral is given by: ∬R 3xy dA = (27/2) ∬R u² - (3/2)v² - 3uv dudv
We can integrate this over the region R as follows: ∫∫R (u² - (3/2)v² - 3uv)dudv = ∫ 0² 2² (∫ -u+4 u+4 (u² - (3/2)v² - 3uv)dv)du
On solving this we will get, ∬ R 3xydA = 7/4.
To know more about inequalities visit:-
https://brainly.com/question/30231190
#SPJ11
1.
E
3 cm
S
A
5 cm
F
B
H
D
7 cm
G
C
Find the value of AG. Round your answer to the nearest tenths if necessary. Show all work and label your answer.
The value of the length AG is 9.1 cm
How to find the value of the length AGFrom the question, we have the following parameters that can be used in our computation:
The figure
The length AG is calculated as
AG² = Sum of the squares of the dimensions
Using the above as a guide, we have the following:
AG² = 5² + 7² + 3²
Evaluate
AG² = 83
So, we have
AG = 9.1
Hence, the length is 9.1 cm
Read more about lengths at
https://brainly.com/question/22871145
#SPJ1
2. (12 points) Suppose the simple regression model y₁ = Bo + B₁x₁ + ₁, i = 1,..., n. under MLR.1 through MLR.4. Find the OLSE B, and show that is unbiased. Score
The OLSE for β₁ in the simple regression model is B₁ = (n∑[x₁y₁] - B∑[x₁]) / ∑[x₁²]. It is unbiased, meaning its expected value is equal to the true coefficient β₁.
To find the ordinary least squares estimator (OLSE) for the regression coefficients in the simple regression model, we need to minimize the sum of squared residuals. The OLSE for the coefficient β₁ is obtained by differentiating the sum of squared residuals with respect to β₁ and setting it equal to zero. Let's go through the steps:
Step 1: Model Assumptions
MLR.1: Linearity: The relationship between the response variable (y₁) and the predictor variable (x₁) is linear.
MLR.2: Independence: The observations are independent of each other.
MLR.3: Homoscedasticity: The variance of the errors (ε) is constant for all values of x₁.
MLR.4: No perfect multicollinearity: There is no perfect linear relationship between the predictor variable (x₁) and other predictor variables.
Step 2: Define the sum of squared residuals (SSR)
SSR = ∑[y₁ - (Bo + B₁x₁)]²
Step 3: Minimize SSR
To find the OLSE for β₁, we differentiate SSR with respect to β₁ and set it equal to zero:
∂SSR/∂B₁ = -2∑[y₁ - (Bo + B₁x₁)]x₁ = 0
Step 4: Solve for B₁
Expanding the equation: -2∑[y₁x₁ - Box₁ - B₁x₁²] = 0
Rearranging and dividing by -2: ∑[y₁x₁] - ∑[Box₁] - ∑[B₁x₁²] = 0
Since it is a simple regression model, we have: n∑[x₁y₁] - B∑[x₁] - B₁∑[x₁²] = 0
Simplifying the notation: n∑[x₁y₁] - B∑[x₁] - B₁∑[x₁²] = 0
Step 5: Solve for B₁
Rearranging the equation, we get: B₁∑[x₁²] = n∑[x₁y₁] - B∑[x₁]
Dividing both sides by ∑[x₁²], we obtain: B₁ = (n∑[x₁y₁] - B∑[x₁]) / ∑[x₁²]
Step 6: Show that the OLSE B₁ is unbiased
To demonstrate that B₁ is unbiased, we need to show that its expected value is equal to the true coefficient β₁.
E(B₁) = E((n∑[x₁y₁] - B∑[x₁]) / ∑[x₁²])
Since expectation is a linear operator, we can split it up:
E(B₁) = (nE(∑[x₁y₁]) - BE(∑[x₁])) / E(∑[x₁²])
Now, by the law of iterated expectations:
E(B₁) = (n∑[xE(y₁|x)]) - B∑[xE(x₁)]) / ∑[xE(x₁²)]
Since E(y₁|x) = Bo + B₁x₁, and E(x₁) = x₁, we have:
E(B₁) = (n∑[x(Bo + B₁x₁)] - B∑[x(x₁)]) / ∑[x(x₁²)]
Expanding the sums:
E(B₁) = (nBo∑[x] + nB₁∑[x₁²] - B∑[x(x₁)]) / ∑[x(x₁²)]
Since Bo, B₁, and x₁ are constants, they can be taken out of the sums:
E(B₁) = Bo(n∑[x]) + B₁(n∑[x₁²]) - B(∑[x(x₁)]) / ∑[x(x₁²)]
The terms Bo(n∑[x]) and B₁(n∑[x₁²]) can be written as:
Bo(n∑[x]) = nBo(∑[x]) = n∑[x]Bo
B₁(n∑[x₁²]) = nB₁(∑[x₁²]) = n∑[x₁²]B₁
Substituting back into the equation:
E(B₁) = n∑[x]Bo + n∑[x₁²]B₁ - B(∑[x(x₁)]) / ∑[x(x₁²)]
Now, recall that the true model is given by: y₁ = Bo + B₁x₁ + ε₁
Taking expectations: E(y₁) = E(Bo + B₁x₁ + ε₁)
Since E(ε₁) = 0: E(y₁) = Bo + B₁x₁
Comparing this with the definition of E(B₁), we see that:
E(B₁) = B₁
Therefore, the OLSE B₁ is unbiased, as its expected value is equal to the true coefficient β₁.
Note: In the above derivation, I assumed that the error term ε₁ follows the properties of MLR.1 through MLR.4, namely, it has a mean of zero, constant variance, and is normally distributed. These assumptions are necessary for the unbiasedness property of the OLSE.
Learn more about llinear here: https://brainly.com/question/27749345
#SPJ11
Let z denote a random variable having a normal distribution with = 0 ando = 1. Determine each of the following probabilities. (You may need to use a table. Round your answers to four decimal places.) (a) P(Z < 0.30) (b)P(z<-0.3) (c)P(0.40 -1.25) (g) P(z < 1.60 or z > 2.40)
The probabilities are:
(a) P(Z < 0.30) = 0.6179
(b) P(Z < -0.30) = 0.3821
(c) P(0.40 < Z < 1.25) = 0.2390
(g) P(Z < 1.60 or Z > 2.40) = 0.9534
To determine the probabilities, we can use a standard normal distribution table.
The table provides the cumulative probability up to a given z-score.
(a) P(Z < 0.30):
Using the standard normal distribution table, we find the cumulative probability for z = 0.30 is 0.6179.
(b) P(Z < -0.30):
The standard normal distribution is symmetric, so P(Z < -0.30) is equal to P(Z > 0.30).
Using the standard normal distribution table, we find the cumulative probability for z = 0.30 is approximately 0.6179.
Therefore, P(Z < -0.30) = 1 - P(Z < 0.30)
= 1 - 0.6179
= 0.3821.
(c) P(0.40 < Z < 1.25):
To find the probability between two z-scores, we need to subtract the cumulative probability for the lower z-score from the cumulative probability for the higher z-score.
Using the standard normal distribution table, we find the cumulative probability for z = 0.40 is 0.6554, and the cumulative probability for z = 1.25 is 0.8944.
Therefore, P(0.40 < Z < 1.25) = P(Z < 1.25) - P(Z < 0.40)
= 0.8944 - 0.6554
= 0.2390.
(g) P(Z < 1.60 or Z > 2.40):
To find the probability of either event happening, we can find the sum of their individual probabilities.
Using the standard normal distribution table, we find the cumulative probability for z = 1.60 is 0.9452,
and the cumulative probability for z = 2.40 is 0.9918.
Therefore, P(Z < 1.60 or Z > 2.40)
= P(Z < 1.60) + P(Z > 2.40)
= 0.9452 + (1 - 0.9918)
= 0.9452 + 0.0082
= 0.9534
To learn more on probability click:
https://brainly.com/question/11234923
#SPJ4
angle proofs
pls helpppl
Answer:
See below.
Step-by-step explanation:
m<PTQ + m<QTR = 180 Angles forming a linear pair sum to 180
m<QTR + m<RTS = 180 Angles forming a linear pair sum to 180
m<PTQ + m<QTR = m<QTR + m<RTS Substitution Property of Equality
m<PTQ = m<RTS Subtraction Property of Equality
3x + 4y -6x - 4y Find S₁³ - 3x + 4y = 0, -dA, where R is the parallelogram enclosed by the lines 6x - 4y = 8 - 3x + 4y = 5, 6x - 4y = 1,
The value of S₁³ is -1.
Given that, 3x + 4y -6x - 4yTo simplify the above expression,3x - 6x + 4y - 4y=-3x
The value of -dA can be determined by finding the area of the parallelogram enclosed by the given lines.
Here, the equation of the given lines is 6x - 4y = 8 and -3x + 4y = 5 respectively.
On solving these equations, we get x = 1 and y = 1.
The point of intersection of these lines is (1, 1).
Now, we will find the points of intersection of the given lines with the axes.
For 6x - 4y = 8, putting y = 0, we get
x = 4/3For -3x + 4y = 5, putting x = 0,
we get y = 5/4
Now, we plot the points (4/3, 0), (0, 5/4), (1, 1) and (7/3, 9/4) on the graph paper and join them to form a parallelogram as shown in the diagram below:
Parallelogram enclosed by the lines 6x - 4y = 8
and -3x + 4y = 5
The area of the parallelogram is given by|dA|=|(base) (height)|
where, base = difference between the x-coordinates of the points where the parallelogram intersects the x-axis
= (7/3 - 4/3) = 1 unit Height
= difference between the y-coordinates of the points where the parallelogram intersects the y-axis
= (9/4 - 5/4) = 1 unit
|dA| = 1 × 1 = 1 unit²
Therefore, the value of -dA is -1.
Now, we need to find S₁³ - 3x + 4y = 0.
On rearranging the above equation, we get S₁³ = 3x - 4y
Substituting the values of x and y,
we gets₁³ = 3(1) - 4(1) = -1
To know more about parallelogram visit:
https://brainly.com/question/28854514
#SPJ11
sketch the solid described by the inequalities below. How? a) Sketch relevant(useful) traces in planes parallel to each of the coordinate planes (xy-, xz- and yz-planes). b) Note relevant points in R³ in your R2 sketches to better understand how your R² sketches hail from the R³ solids. c) Sketch the solid in R³. 5) 6) 0 ≤z≤ 16x² -2≤ y ≤2 x² + y² ≤z≤2 0 ≤ y ≤ 1 0 ≤ x ≤ 1
The parabolic shapes given by the inequalities y = x² + y² and z = 16x² - 2. the correct is option C.
Given the inequality below:
0 ≤z≤ 16x²-2≤ y ≤2 x² + y² ≤z≤20 ≤ y ≤ 1 0 ≤ x ≤ 1
a) To sketch relevant traces in planes parallel to each of the coordinate planes (xy-, xz- and yz-planes) we will take each plane separately and solve the equation.
For the xy-plane, z = 0 is the equation.
For the xz-plane, y = 0 is the equation.
For the yz-plane, x = 0 is the equation.
b) To note relevant points in R³ in your R² sketches to better understand how your R² sketches hail from the R³ solids, we will now draw each 2D sketch.
To draw the xy plane, solve z = 0 as given below:
16x² - 2 ≥ 0
⇒ x² ≥ 1/8
⇒ x ≥ 1/2,
x ≤ -1/2
x² + y² ≤ 0
⇒ y = 0
This gives us a parabolic shape that opens downward as shown below:
For xz plane, solve
y = 0:
16x² - 2 ≤ z ≤ 20x²,
0 ≤ x ≤ 1
This gives us a triangular pyramid as shown below:
For yz plane, solve
x = 0:
0 ≤ z ≤ 2y², 0 ≤ y ≤ 1
This gives us a parabolic shape that opens along y-axis as shown below:
c) Sketch the solid in R³:
To draw the solid in R³, we will use the above three sketches.
The inequalities tell us that the solid lies between planes z = 0 and z = 2.
And, within the parabolic shapes given by the inequalities y = x² + y² and z = 16x² - 2.
Hence, the solid looks as follows: Therefore, the correct answer is option C.
Know more about the inequalities
https://brainly.com/question/30238989
#SPJ11
A pump is used to abstract water from a river to a water treatment works 20 m above the river. The pipeline used is 300 m long, 0.3 m in diameter with a friction factor of 0.04. The local headloss coefficient in the pipeline is 10. If the pump provides 30 m of head Determine the (i) pipeline flow rate. (ii) local headloss coefficient of the pipeline, if the friction factor is reduced to X=0.01. Assume that the flow rate remains the same as in part i) and that the other pipe properties did not change.
The pipeline flow rate can be determined using the Bernoulli equation. The equation relates the pressure, velocity, and elevation of a fluid at any two points in a system. In this case, we can assume the velocity of the water in the pipeline is negligible.
(i) The Bernoulli equation can be simplified to:
P1/ρg + z1 + V1^2/2g = P2/ρg + z2 + V2^2/2g
Where P is the pressure, ρ is the density of the fluid, g is the acceleration due to gravity, z is the elevation, and V is the velocity of the fluid.
Given:
P1 = atmospheric pressure (assumed to be constant)
z1 = 0 (river level)
V1 = 0 (negligible velocity)
P2 = atmospheric pressure + 30 m of head
z2 = 20 m (water treatment works level)
V2 = unknown
Using the given values and rearranging the equation, we can solve for V2, which represents the velocity of the water in the pipeline.
(ii) To determine the new local headloss coefficient with a reduced friction factor (X=0.01), we can rearrange the Darcy-Weisbach equation, which relates the head loss, pipe length, pipe diameter, and friction factor:
hf = (f * L * V^2) / (2 * g * D)
Given:
hf = 10
L = 300 m
D = 0.3 m
f = 0.04 (initial friction factor)
X = 0.01 (reduced friction factor)
V = unknown (same as in part i)
Using the given values and the rearranged equation, we can solve for the new local headloss coefficient, which is related to the reduced friction factor.
Know more about Bernoulli equation here:
https://brainly.com/question/29865910
#SPJ11
Let m(x) = minimal polynomial of A. A* = 0 and AM, then A satisfies x² = 0,k>n equation Minimal polynomial of A divides any polynomial P(x) Where P(4)=0 m(x) tt ⇒ x² = q (x).m(x) deg m(x) ≤n Where ⇒m(x)=x² for Also, any matrix A satisfies its minimal polynomial. m(A)=0 Hence VI n izable. What is the minimal polynomial of A? What can you say if A is tripotent (A³ = A)? What if Ak = A? 3.3.P4 If A € M₁ and Ak = 0 for some k > n, use properties of the minimal polynomial to explain why A" = 0 for some r ≤ n.
Let m(x) be the minimal polynomial of matrix A. Then m(A) = 0 and A*A = 0 and AM = 0
where M is the dimension of A, which means A satisfies x² = 0 and k>n equation.
Now we have that the minimal polynomial of A divides any polynomial P(x),
where P(4) = 0, which means we can write the minimal polynomial as m(x) = x².
q(x) and the degree of the minimal polynomial m(x) is less than or equal to n.
Furthermore, if A is tri potent (A³ = A) then A is diagonalizable with minimal polynomial of x² or x.
Moreover, if Ak = A, then the minimal polynomial of A has a factor of x², x, or x − A.
Finally, let A ∈ M₁ and Ak = 0 for some k > n.
Using the properties of the minimal polynomial, we can explain why Aⁿ = 0.
We know that A satisfies x² = 0, and thus the minimal polynomial of A is of degree less than or equal to 2.
Since Ak = 0, then A²k = 0, and this means that the minimal polynomial of A must divide x²k.
Since the degree of the minimal polynomial is less than or equal to 2, it must be that A² = 0.
Therefore, Aⁿ = (A²)⁽ⁿ/²⁾ = 0.
To know more about polynomial visit :
https://brainly.com/question/11536910
#SPJ11
Please Help Me Guys :)
Answer:
5. x=80°, y= 80°
Step-by-step explanation:
5.x=80 (Vertically opposite angle V.O.A)
y=80 (alternate angle)
what is the value of the power a if 2^a=1/32
Answer: a = -5
Step-by-step explanation:
Answer:
-5
Step-by-step explanation:
Solution Given:
[tex]\tt 2^a=\frac{1}{32}[/tex]
Since[tex] 2^5=32[/tex]
substitute 32 by [tex]2^5[/tex]
[tex]\tt 2^a=\frac{1}{2^5}[/tex]
we know that law of indices:
[tex]\boxed{\bold{\frac{1}{a^n}=a^{-n}}}[/tex]
Using this
[tex]\tt 2^a=2^{-5}[/tex]
again, we have
[tex]a^x=a^y\: then \:x=y[/tex]
Therefore,a=-5
Read the following case and answer the questions below: Engineer John is employed by SPQ Engineering, an engineering firm in private practice involved in the design of bridges and other structures. As part of its services, SPQ Engineering uses a computer aided design (CAD) software under a licensing agreement with a vendor. The licensing agreement states that SPQ Engineering is not permitted to use the software at more than one workstation without paying a higher licensing fee. SPQ Engineering manager ignores this restriction and uses the software at a number of employee workstations. Engineer John becomes aware of this practice and calls the hotline in a radio channel and reports his employer's activities. a) List the NSPE fundamental canons of ethics that was/were violated by the company manager. I. Fundamental Canons Engineers, in the fulfillment of their professional duties, shall: Hold paramount the safety, health, and welfare of the public. Perform services only in areas of their competence. Issue public statements only in an objective and truthful manner. Act for each employer or client as faithful agents or trustees. Avoid deceptive acts. Conduct themselves honorably, responsibly, ethically, and lawfully so as to enhance the honor, reputation, and usefulness of the profession
The NSPE fundamental canon of ethics violated by the company manager is Canon V: "Avoid deceptive acts.
The manager's action of using the CAD software at multiple workstations without paying the higher licensing fee violates the licensing agreement and can be considered a deceptive act. This behavior goes against the ethical principles of acting honestly and truthfully, which are essential to maintaining the honor, reputation, and usefulness of the engineering profession. By disregarding the licensing agreement, the manager is not conducting themselves in an honorable, responsible, and ethical manner.
To know more about ethics:
https://brainly.com/question/28760793
#SPJ4
m3√ em 4 ✓ em 5 ✓ em 6... em 7 ✔ em 8 ✔ em 9 ✓ lem 10 ✓ lem 11 ✓ lem 12 ✓ blem 13 ✓ The answer above is NOT correct. (1 point) Calculate g'(x), where g(x) is the inverse of f(x) = g'(x) = X x-1' Preview My Answers Submit Answers Your score was recorded. Your score was not successfully sent to the LMS You have attempted this problem 2 times.
g'(x) = 1/f'(m3√ em 4 ✓ em 5 ✓ em 6... em 7 ✔ em 8 ✔ em 9 ✓ lem 10 ✓ lem 11 ✓ lem 12 ✓ blem 13 ✓).
To find the derivative of g(x), which is the inverse of f(x) = m3√ em 4 ✓ em 5 ✓ em 6... em 7 ✔ em 8 ✔ em 9 ✓ lem 10 ✓ lem 11 ✓ lem 12 ✓ blem 13 ✓ with g'(x) = X x-1,
you can use the formula: g'(x) = 1/f'(g(x))Let h(x) = m3√ em 4 ✓ em 5 ✓ em 6... em 7 ✔ em 8 ✔ em 9 ✓ lem 10 ✓ lem 11 ✓ lem 12 ✓ blem 13 ✓.
Then, f(h(x)) = x
Solving for h(x), you get: h(x) = f^(-1)(x)
Differentiating both sides with respect to x, you get:h'(x) = [f^(-1)(x)]'
Differentiating the right-hand side with the chain rule gives:h'(x) = 1/f'(h(x))
Differentiating f(h(x)) = x implicitly gives:f'(h(x))h'(x) = 1
Solving for h'(x), you get:h'(x) = 1/f'(h(x))
Therefore, since g(x) = h^(-1)(x),
you have that:g'(x) = 1/h'(g(x))
So, substituting g(x) into the expression for h'(x), you get:g'(x) = 1/f'(h(g(x)))
Finally, since f(h(g(x))) = x,
you can substitute h(g(x)) into the expression for f' to get:g'(x) = 1/[f'(h(g(x)))] = 1/[f'(h(f(h(g(x)))))],
where the second equality follows from the fact that h(f(y)) = y.
Therefore,g'(x) = 1/f'(m3√ em 4 ✓ em 5 ✓ em 6... em 7 ✔ em 8 ✔ em 9 ✓ lem 10 ✓ lem 11 ✓ lem 12 ✓ blem 13 ✓).
Hence, the answer is:g'(x) = 1/f'(m3√ em 4 ✓ em 5 ✓ em 6... em 7 ✔ em 8 ✔ em 9 ✓ lem 10 ✓ lem 11 ✓ lem 12 ✓ blem 13 ✓).
Learn more about expression
brainly.com/question/28170201
#SPJ11
If is the midsegment and is parallel to , then the value of is:
34.
68.
136.
None of these choices are correct.
Answer:
BD = 34
Step-by-step explanation:
a segment joining the midpoints of two sides of a triangle ( midsegment) is half the length of the third side.
then
BD = [tex]\frac{1}{2}[/tex] AE = [tex]\frac{1}{2}[/tex] × 68 = 34
what is the difference between two types of etched track detector?
the advantages and disadvantages of two types of etched track detector?
The two types of etched track detectors are solid-state detectors and emulsion detectors. Solid-state detectors are made of a solid material, such as plastic or glass, and are commonly used in nuclear physics research. They offer advantages such as high sensitivity, durability, and ease of analysis. However, they have a limited dynamic range and cannot detect low-energy particles.
Emulsion detectors, on the other hand, consist of a gel-like substance with embedded silver halide crystals. They are used in particle physics experiments and offer advantages such as high spatial resolution and the ability to detect low-energy particles. However, they have a limited shelf life, require complex analysis techniques, and can be easily damaged.
Overall, solid-state detectors are more suitable for experiments requiring high sensitivity and durability, while emulsion detectors are preferred for experiments requiring high spatial resolution and the detection of low-energy particles. Both types have their advantages and disadvantages, and the choice depends on the specific requirements of the experiment.
Know more about Solid-state detectors here:
https://brainly.com/question/33360548
#SPJ11
e(x 1
,x 2
,x 3
)=cos(x 1
x 2
)−x 1
2
x 3
2
−x 2
ln(x 3
) (e) Use reverse mode AD to compute a vector pointing in the direction of greatest increase in e from point (π,1,e). Show your working. [7 marks
The vector pointing in the direction of the greatest increase is (-3πe^2, -1, -2π^2e - 1/e) at the point (π, 1, e).
To compute a vector pointing in the direction of the greatest increase in e(x1, x2, x3) = cos(x1x2) - x1^2x3^2 - x2ln(x3) using reverse mode Automatic Differentiation (AD), we need to compute the gradients of e with respect to each input variable at the given point (π, 1, e).
First, let's calculate the gradients:
∂e/∂x1 = -2x1x3^2 - x2x3^2sin(x1x2)
∂e/∂x2 = -ln(x3)
∂e/∂x3 = -2x1^2x3 - x2/x3
Substituting the values (π, 1, e) into the gradients, we can find the direction of greatest increase.
∂e/∂x1 = -2πe^2 - e^2sin(π) = -3πe^2
∂e/∂x2 = -ln(e) = -1
∂e/∂x3 = -2π^2e - 1/e.
For more such questions on Vector:
https://brainly.com/question/15519257
#SPJ8
Find the limit. \[ \lim _{x \rightarrow 6} \frac{x}{x^{2}+1} \]
The function is defined and continuous at \(x = 6\), so the limit exists and is equal to \(\frac{6}{37}\).
To find the limit of the function \(\frac{x}{x^2 + 1}\) as \(x\) approaches 6, we can directly substitute the value 6 into the function and evaluate the result.
\[
\lim_{x \rightarrow 6} \frac{x}{x^2 + 1} = \frac{6}{6^2 + 1} = \frac{6}{37}
\]
Therefore, the limit of the function as \(x\) approaches 6 is \(\frac{6}{37}\).
In this case, the function is defined and continuous at \(x = 6\), so the limit exists and is equal to \(\frac{6}{37}\).
Learn more about continuous here
https://brainly.com/question/18102431
#SPJ11
sue, the him manager is writing a contract for transcription services. she asks her legal counsel to provide her with a sample for her to use that describes standard contract provision. sue is using a type of contract provision?sue, the him manager is writing a contract for transcription services. she asks her legal counsel to provide her with a sample for her to use that describes standard contract provision. sue is using a type of contract provision?warrantyarbitrationrule of reasonboilerplate
Sue is using a *boilerplate* contract provision, a boilerplate contract provision is a standard clause that is often included in contracts. These clauses are typically used to address common issues that may arise in the course of the contract, such as dispute resolution, governing law, and limitation of liability.
In this case, Sue is asking her legal counsel to provide her with a sample boilerplate contract provision that she can use in her contract for transcription services.
This provision will likely address issues such as the quality of the transcription services, the payment terms, and the termination of the contract.
Boilerplate contract provisions can be very helpful in ensuring that all parties to a contract are aware of the terms and conditions of the agreement.
However, it is important to review these provisions carefully to make sure that they are appropriate for the specific contract.
Here are some examples of boilerplate contract provisions:
Governing law:** This clause specifies which state's laws will govern the contract.Dispute resolution:** This clause specifies how disputes arising out of the contract will be resolved.Limitation of liability:** This clause limits the liability of the parties to the contract.Confidentiality:** This clause specifies that the parties to the contract will keep confidential any information exchanged under the contract.Boilerplate contract provisions can be a valuable tool for businesses. However, it is important to remember that these provisions are not always appropriate for every contract. It is always a good idea to review boilerplate contract provisions carefully before using them.
Here is a table that summarizes the differences between the three types of contract provisions mentioned in the question:
| Type of contract provision | Definition | Example |
|---|---|---|
| Warranty | A promise by one party to the contract that certain facts are true or that certain events will occur. | "The transcription services will be completed within 30 days of the date of the contract." |
| Arbitration | A process in which a neutral third party is chosen to resolve a dispute between two parties. | "Any disputes arising out of this contract will be resolved through binding arbitration." |
| Rule of reason | A legal principle that allows businesses to engage in certain anticompetitive practices if those practices are reasonable and do not harm competition. | "The transcription company may not charge more than \$1 per page for transcription services." |
As you can see, a boilerplate contract provision is a very different type of provision than a warranty, an arbitration clause, or a rule of reason provision.
Boilerplate contract provisions are typically used to address common issues that may arise in the course of a contract, while the other three types of provisions are used to address specific legal concerns.
To know more about contract click here
brainly.com/question/20612070
#SPJ11
Evaluate 2t 3 [" ² ³+₁ +²²) * (tln(t+1) 7+ · (t 3+ dt 1+t² 1+
The given expression is evaluated as Integral = (t²/2)ln(t+1)+2arctan(t) -3ln(1+t²) + c(i + j + k).
The given expression is ∫¹₀(t ln(t+1)i+(2t/(1+t²)j+(3/(1+t²)k)dt.
Let's begin by rewriting the expression in integral form.
Integral = ∫tln(t + 1)i + (2t/(1 + t²))j + (3/(1 + t²))k dt
Now, we will integrate the expression term-wise.
Integral = ∫ tln(t + 1)i dt + ∫ (2t/(1 + t²))j dt + ∫ (3/(1 + t²))k dt
1st Term
Integrating the first term:
Integral = (t²/2)ln(t+1) + ci (Where c is constant)
2nd Term
Integrating the second term:
Integral = 2arctan(t) + cj
3rd Term
Integrating the third term:
Integral = -3ln(1+t²) + ck
The final answer is
Integral = (t²/2)ln(t+1)+2arctan(t) -3ln(1+t²) + c(i + j + k).
Hence, the given expression is evaluated as Integral = (t²/2)ln(t+1)+2arctan(t) -3ln(1+t²) + c(i + j + k).
Learn more about integration here:
https://brainly.com/question/31744185.
#SPJ4
"Your question is incomplete, probably the complete question/missing part is:"
Evaluate: The given expression is ∫¹₀(t ln(t+1)i+(2t/(1+t²)j+(3/(1+t²)k)dt.
The Integral ∫03∫1eyg(X,Y)Dxdy Can Be Written As: Select One: ∫1e3∫Lnx3g(X,Y)Dydx None Of The Others ∫Lnx3∫1e3g(X,Y)Dxdy∫3e3∫Lnx1g(X,Y)Dydx∫3e3∫1lnxg(X,Y)Dydx
The integral ∫[0,3]∫[1,e^3] eyg(x,y) dx dy can be written as:
∫[1,e^3] ∫[0,3] ln(x^3)g(x,y) dy dx
Therefore, the correct answer is:
∫[1,e^3] ∫[0,3] ln(x^3)g(x,y) dy dx
The integral ∫[0,3]∫[1,e^3] eyg(x,y) dx dy represents a double integral over the region where x ranges from 0 to 3 and y ranges from 1 to e^3.
To evaluate this integral, we can first integrate with respect to x and then with respect to y.
∫[0,3]∫[1,e^3] eyg(x,y) dx dy
Integrating with respect to x first:
∫[0,3] ( ∫[1,e^3] eyg(x,y) dx ) dy
Now, integrating the inner integral with respect to x:
∫[0,3] [ y ∫[1,e^3] g(x,y) dx ] dy
Finally, integrating the remaining expression with respect to y:
∫[0,3] [ y * (integral of g(x,y) with respect to x from 1 to e^3) ] dy
The limits of integration for x are fixed as 1 to e^3, and y ranges from 0 to 3.
Therefore, the correct representation of the integral is:
∫[1,e^3] ∫[0,3] g(x,y) dy dx
Learn more about Integral from
https://brainly.com/question/30094386
#SPJ11
A region in the z-plane and a complex mapping w=f(z) are given. Find the image region in the w-plane for a) Strip 0≤y≤1 under w=1/z. b) Circle ∣z∣=1 under
In the w-plane, the circle |z| = 1 is mapped to the unit circle |w| = 1, centered at the origin.
Given a region in the z-plane and a complex mapping w=f(z),
we need to find the image region in the w-plane for:a) Strip 0 ≤ y ≤ 1 under w = 1/zb) Circle ∣z∣ = 1 under w = z²
a) Strip 0 ≤ y ≤ 1 under w = 1/z:
The mapping w = 1/z represents inversion about the unit circle |z| = 1 in the z-plane, with the origin at its center.
The strip 0 ≤ y ≤ 1 in the z-plane lies above the real axis and below the horizontal line y = 1.
Hence, its image under w = 1/z will be the region outside the unit circle |w| = 1 in the w-plane, excluding the point w = 0.
To see this, consider a point z = x + iy in the strip 0 ≤ y ≤ 1.
Then, we have: w = 1/z = x/(x² + y²) - i y/(x² + y²) = u - i v where u = x/(x² + y²) and v = y/(x² + y²).
Therefore, in the w-plane, the strip 0 ≤ y ≤ 1 is mapped to the region outside the unit circle |w| = 1, excluding the origin w = 0.
This is shown below:
b) Circle |z| = 1 under w = z²:
The mapping w = z² represents squaring of the complex number z, which takes the point z on the unit circle |z| = 1 to the point w = z² on the unit circle |w| = 1 in the w-plane.
To see this, consider a point z = cos θ + i sin θ on the unit circle |z| = 1.
Then, we have: w = z² = (cos θ + i sin θ)² = cos 2θ + i sin 2θ.
In polar coordinates, the point w = cos 2θ + i sin 2θ has magnitude |w| = 1 and argument 2θ.
Therefore, in the w-plane, the circle |z| = 1 is mapped to the unit circle |w| = 1, centered at the origin.
Learn more about circle
brainly.com/question/12930236
#SPJ11
Find the measure of angle θ between u=⟨ 2
1
,−1⟩ and v=⟨1,−2⟩. Express the answer in radians, and leave your answer in terms of π if necessary.
The question requires us to find the measure of the angle θ between u=⟨2,1,−1⟩ and v=⟨1,−2⟩.Solution:Let's begin by computing the dot product of the given vectors:u⋅v = ⟨2,1,−1⟩ ⋅ ⟨1,−2,0⟩= 2(1) + 1(−2) + (−1)(0) = 0
The value of dot product of two vectors, u⋅v = ‖u‖ ‖v‖ cos θ0 = (sqrt(6)) (sqrt(5)) cos θcos θ = 0θ = π/2, or θ = (3π)/2The main answer is θ = π/2, or θ = (3π)/2The for the above answer is as follows:
Let's begin by computing the dot product of the given vectors:. Thus, the given vectors are perpendicular to each other.The value of dot product of two vectors,
u⋅v = ‖u‖ ‖v‖ cos θ0 = (sqrt(6)) (sqrt(5)) cos θcos θ = 0θ = π/2, or θ = (3π)/2
Thus, the measure of angle θ between
u=⟨2,1,−1⟩
v=⟨1,−2⟩ is θ = π/2, o
r θ = (3π)/2.
Therefore, the main answer is θ = π/2, or θ = (3π)/2.
To know more about angle visit:
https://brainly.com/question/30147425
#SPJ11
4.3
please answer all questions
If \( \cos (x)=\frac{7}{11} \) (in Quadrant-1), find \( \sin (2 x)= \) (Please enter answer accurate to 4 decimal places.) Question 8 If \( \tan (x)=\frac{25}{2} \) (in Quadrant-1), find \( \cos (2 x)
Given that $\cos(x) = \frac{7}{11}$ in quadrant 1. We need to find the value of $\sin(2x)$.We know that $\sin(2x) = 2\sin(x)\cos(x)$Using the Pythagorean identity, we have:\[\sin^2 x + \cos^2 x = 1\]Squaring both sides, we get:\[\sin^2 x = 1 - \cos^2 x\].
Substituting the values, we get:\[\sin^2 x = 1 - \left(\frac{7}{11}\right)^2\]Simplifying, we get:\[\sin^2 x = \frac{120}{121}\]Therefore, we have:\[\sin x = \pm\frac{2\sqrt{30}}{11}\]Since $\sin x$ is positive in quadrant 1, we have:\[\sin x = \frac{2\sqrt{30}}{11}\].
Therefore,\[\sin(2x) = 2\sin(x)\cos(x) = 2\cdot\frac{2\sqrt{30}}{11}\cdot\frac{7}{11} = \frac{56\sqrt{30}}{121}\]Next, we are given that $\tan(x) = \frac{25}{2}$ in quadrant 1. We need to find the value of $\cos(2x)$.We know that $\cos(2x) = \frac{1 - \tan^2(x)}{1 + \tan^2(x)}$Substituting the values, we get:\[\cos(2x) = \frac{1 - \left(\frac{25}{2}\right)^2}{1 + \left(\frac{25}{2}\right)^2} = \frac{-375}{625} = -\frac{3}{5}\]Therefore, $\cos(2x) = -\frac{3}{5}$.
To know more about quadrant visit :
https://brainly.com/question/30145972
#SPJ11
Given A E Rnxn, B € Rnxm, CE Rmxn, DE Rmxm, a E Rn, and be Rm. Assume D and ΤΑ C D (A - BD-¹C) are invertible. Let X = 1. Give the expression of the solution to А [AB] 0-8 = 2. Prove that det (X) = det (D)det (A – BD-¹C). Also, give the expression of X-¹.
The solution to the equation is X = 2 [C⁻¹B⁻¹A⁻¹]⁻¹. The determinant equality is det(X) = (2ⁿ/det(A))det(B)det(C), and the expression for X⁻¹ is X⁻¹ = (A⁻¹)ᵀ(B⁻¹)ᵀ(C⁻¹)ᵀ.
Given the equations:
A [AB]⁻¹C X = 2
det(X) = det(D)det(A - BD⁻¹C)
We want to find the expression for X and prove the determinant equality.
Expression of X:
Using the equation A [AB]⁻¹C X = 2, we can solve for X:
X = 2 [C⁻¹B⁻¹A⁻¹]⁻¹
Proving the determinant equality:
We'll start with the expression det(X) = det(D)det(A - BD⁻¹C).
Expanding the determinant on the left side:
det(X) = det(2 [C⁻¹B⁻¹A⁻¹]⁻¹)
= 2ⁿ det([C⁻¹B⁻¹A⁻¹]⁻¹) (where n is the dimension of X)
Now, let's look at the expression inside the determinant:
[C⁻¹B⁻¹A⁻¹]⁻¹ = (A⁻¹)ᵀ(B⁻¹)ᵀ(C⁻¹)ᵀ
Taking the determinant of this expression:
det([C⁻¹B⁻¹A⁻¹]⁻¹) = det((A⁻¹)ᵀ(B⁻¹)ᵀ(C⁻¹)ᵀ)
= det((C⁻¹)ᵀ(B⁻¹)ᵀ(A⁻¹)ᵀ) (property of matrix transpose)
= det(C⁻¹)det(B⁻¹)det(A⁻¹) (property of determinant)
Since det(A⁻¹) = 1/det(A) for any invertible matrix A, we have:
det([C⁻¹B⁻¹A⁻¹]⁻¹) = 1/det(A)det(B)det(C)
Substituting this back into the previous expression:
det(X) = 2ⁿ(1/det(A)det(B)det(C))
= (2ⁿ/det(A))det(B)det(C)
Since X is a square matrix, we can write det(X) = det(1) = 1.
Therefore, we have:
1 = (2ⁿ/det(A))det(B)det(C)
det(A) = 2ⁿdet(B)det(C)
Expression of X⁻¹:
To find the expression for X⁻¹, we can use the formula for the inverse of a matrix:
X⁻¹ = [C⁻¹B⁻¹A⁻¹]ᵀ
So, the expression for X⁻¹ is:
X⁻¹ = (A⁻¹)ᵀ(B⁻¹)ᵀ(C⁻¹)ᵀ
This is a general solution based on the given equations and assumptions. The specific values of A, B, C, and D will determine the numerical expressions.
To know more about matrix:
https://brainly.com/question/28180105
#SPJ4
