Horses with the greatest linear speed on a merry-go round are located:
a. near the center
b. near the outside
c. anywhere

The torque applied by the adult rider can be represented by the following expression: Torque = force x distance from the axis of rotation, in terms of quantities and variables.

In this case, the force applied by the adult rider is the force exerted by the rider on the pedal, and the distance from the axis of rotation is the distance between the pedal and the axis of rotation (the center of the wheel). Let's assume the force exerted by the adult rider on the pedal is represented by the variable F_rider, and the distance between the pedal and the axis of rotation is represented by the variable r. Torque = F_rider x r. It's important to note that the torque is also affected by the angle between the applied force and the radius vector. In this case, we assumed that the rider is applying force in a direction that is perpendicular to the radius vector. Also, the direction of rotation that is positive is assumed to be counter clockwise.

learn more about force here:

https://brainly.com/question/13191643

#SPJ4

The radius of curvature is observed to be equal to twice the focal length for spherical mirrors with small apertures. Hence R = 2f.

As the radius of curvature for a lens grow (R2 > R1), the curvature of the lens decreases, and the focal length of the lens expands (f2 > f1) We can say clearly that the main focus of a spherical mirror lies at the core between the center of curvature and the pole.

the radius of curvature becomes longer the circle gets larger. As the circle gets larger, its curve gets praised, as the curve gets admired on a clear material Focal length of a lens depends on the deform index of the glass from which it is built, and on the curvature of its two surfaces.

So we can conclude that the result of a radius of curvature on the focal length of a convex lens.

Learn more about curvature here: https://brainly.com/question/30106462

#SPJ1

The new mass must be inserted and hung at a distance of 30 cm, per the calculation.

The past tense of the verb hang, which means "to suspend or be suspended," is "to hold." When it implies "to kill someone by tying a rope attached from above and removing the supporting from beneath," the past tense of the verb to hang is "to hang someone."

From the diagram,

W₁(50-30) + W₃(x-50) = W₂(80-50)

were, W₁ = m₁g = 0.4×9.8 = 3.92 N ( Where m₁ = 0.4 kg and g = 9.8

W₂ = m₂g =0.6×9.8 = 5.88 N ( where m₂ = 0.6 kg)

 W₃ = m₃g = 0.3×9.8 = 2.94 N ( where m₃ = 0.3 kg)

Therefore,

3.92(30) + 2.94(50-x) = 5.88(30)

117.6 + 147-2.94x = 176.4

2.94x+264.6 = 176.4

-2.94x = 176.4-264.6

2.94x = 88.2

x = -88.2/-2.94

x = 30 cm

Thus the third mass must be hung 30 cm

To know more about hanged visit:

https://brainly.com/question/29667752

#SPJ4

0.002 electrical force is acting on the balloon.

Given information:

mass of balloon = 10g

charge on balloon = 0.002 coulomb

electric field = 1 volt/meter

To find electrical force acting on balloon

Use formula.

  F = q * E

      = 0.002 coulomb * 1 volt/meter

      = 0.002

The repulsive or seductive commerce between any two charged bodies is called as electric force. analogous to any force, its impact and goods on the given body are described by Newton's laws of motion. The electric force is one of the various forces that act on objects.

Learn more about Newton's laws of motion visit:

brainly.com/question/29768600

#SPJ4

A good analogy to this process in the case of gravity would be carrying a heavy object up a flight of stairs. Work must be done and energy is expended to move the object further away from the ground.

What is the move ?

The move is a change of direction or position, usually from one place to another. It can involve anything from a simple walk to a large and complex relocation. In the context of sports, it means a technique used by a player to gain an advantage over an opponent. In dance, it is a gesture or step that is part of a larger routine. In business, it can mean a strategic shift in direction taken by a company in order to improve its performance or gain a competitive edge. Moves can also be used in the context of decision-making, where one assesses the pros and cons of different options before settling on the best option.

To learn more about move

https://brainly.com/question/27803422

#SPJ4

If the direction of the applied force is reversed on a block sliding on a horizontal surface, the force of kinetic friction between the block and the surface will also be reversed.

The force of kinetic friction will now act in the opposite direction of the applied force, and its magnitude will remain the same (0.5 N). As a result, the net force acting on the block will be the difference between the applied force and the force of kinetic friction, which will determine the block's acceleration. The block will slow down and eventually stop moving, as the force of kinetic friction will be greater than the applied force in this case.

Learn more about friction force and its effect on the motion of an object. here: https://brainly.com/question/23161460

#SPJ4

Your question is incomplete, but most probably, the complete question is:

A horizontal force acts on a block sliding on a horizontal surface. The force of kinetic friction between the block and the surface is 0.5F. If the direction of the applied force is reversed, which is true?

The magnitude of the net force on the block increases.

The magnitude of the acceleration of the block remains the same.

The kinetic energy of the block increases.

The velocity of the block remains the same.

Answer:

helps us predict how a magnetic field would interact with an electric circuit to produce an electromotive force

Explanation:

Homologous chromosomes arbitrarily divide and move to opposing poles throughout Ana-phase I of meiosis, which is the best way to describe what happens.

Either of the two sites on Earth in which the rotation axis crosses the surface is referred to as a geographical pole. "Poles" are the parts of magnets with the strongest magnetic fields. Numerous magnet poles will either repel, pull, or attract one another.

A magnet's south and north poles are equally powerful. The capacity of a magnet to generate a magnetic flux and to pull or push other magnetically or superconductors is referred to as its strength. The power of a magnet is not reliant on its magnetic field.

To know more about poles visit:

https://brainly.com/question/536099

#SPJ4

The time taken by the electron from one plate to reach the other plate is 1.12 x 10⁻¹⁷ s

Two metal plates separated by the distance = 15 cm

                                                                          = 0.15 m

The electric field between the plates = 3 x 10³ N/C

The mass of the electron = 9.1 x 10⁻³¹ kg

The charge of the electron = 1.6 x 10⁻¹⁹ C

The time taken by the electron to hit the other plate can be found using the formula,

             d = 1/2at² + vt

where d is the distance between the plate

           a is the acceleration of the electron

           t is the time taken by the electron

          v is the velocity of the electron.

Let us find the acceleration of the electron

             a = E/m

where E is the electric field of the electron

           m is the mass of the electron

             a =  3 x 10³ / 9.1 x 10⁻³¹

                =  3.27 x 10³³m/s²

Let us substitute the known values in the distance equation, we get

             d = 1/2at² + vt

         0.15 = 1/2 x 3.27 x 10³³ x t² x 0t [ the initial velocity of the electron is zero]

             t² = 2 x 0.15 / 3.27 x 10³³

                 = 0.3 / 3.27 x 10³³

                 =  0.0917 x 10⁻³³

                 = √ (0.0917 x 10⁻³³)

                 = 1.12 x 10⁻¹⁷ s

Therefore, the time taken by the electron is 1.12 x 10⁻¹⁷ s

Learn more about the electrons in

https://brainly.com/question/12001116

#SPJ4

Radio waves and  X- rays wavelength regions cannot be studied with telescopes on the ground.

The longest wavelengths of the electromagnetic spectrum, which are present in radio waves, are often found at frequencies of 300 gigahertz and lower. While the wavelength for 30 Hz is 10,000 kilometers, it is 1 mm for 300 GHz.An X-ray or, much less frequently, an X-radiation is a penetrating kind of high-energy electromagnetic radiation. The majority of X-rays have wavelengths in the range of 10 picometers to 10 nanometers, which corresponds to energy of 145 eV to 124 keV and frequency of 30 petahertz to 30 exahertz.

X-ray(s) can be spelled in English as x-ray(s), xray(s), and X ray (s). Although the most common use of X-rays is to check for fractures (broken bones), there are other applications as well.

Learn more about  X- rays

brainly.com/question/23281551

#SPJ4

The momentum of the runner:

momentum = mass x velocity = 50 kg x 3 m/s = 150 kg*m/s

The momentum of the truck:

momentum = mass x velocity = 3000 kg x 1 m/s = 3000 kg*m/s

The difference in momentum between the runner and the truck:

difference in momentum = momentum of truck - momentum of runner = 3000 kgm/s - 150 kgm/s = 2850 kg*m/s

So, the difference in momentum between the 50 kg runner moving at 3 m/s and the 3000 kg truck moving at a speed of 1 m/s is 2850 kg*m/s

The final volume of the steam is 0.8 m^3, which is an increase of four times the initial volume. This expansion is due to the heat added to the steam, causing the steam molecules to move faster and occupy a larger volume.

To determine the final state of the steam after it has been heated, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature in kelvin.

We can use this equation to solve for the final volume of the steam after it has been heated to 500 degrees celsius. We can assume the steam is an ideal gas.

First, convert the initial temperature of 50 kPa to kelvin:

T1 = 50 + 273.15 = 323.15 K

Next, convert the final temperature of 500 degrees celsius to kelvin:

T2 = 500 + 273.15 = 773.15 K

The ideal gas constant R = 8.314 J/mol.K

We know the mass of steam is 1.8 kg, and we can use the molar mass of water, which is 18 g/mol, to calculate the number of moles of steam n = 1.8 kg / 18 g/mol = 0.1 mol.

Now we can use the ideal gas law to solve for the final volume of the steam, using the information we have:

P1V1 = nRT1

V1 = nRT1/P1 = 0.1 mol * 8.314 J/mol.K * 323.15 K / 50 kPa = 0.200 m^3

P2V2 = nRT2

V2 = nRT2/P2 = 0.1 mol * 8.314 J/mol.K * 773.15 K / 50 kPa = 0.8 m^3

The final volume of the steam is 0.8 m^3, which is an increase of four times the initial volume. This expansion is due to the heat added to the steam, causing the steam molecules to move faster and occupy a larger volume.

Learn more about gas law in brainly.com/question/12669509

#SPJ1

The magnitude of the force on the calcium ion is 1.0 x 10^7 N/C * e = 1.6 x 10^-19 N.

Magnitude is a measure of the size or strength of a physical quantity, such as size, brightness, or intensity. Magnitude can be measured in terms of intensity, size, brightness, or a combination of those criteria. For example, the magnitude of an earthquake is usually determined by measuring the intensity of the seismic waves that are generated by the earthquake. Magnitude is also used to measure the brightness of stars, with the brightest stars being given the highest magnitude.

The magnitude of the force on a calcium ion with charge +e is equal to the field strength multiplied by the charge of the ion. Thus, the magnitude of the force on the calcium ion is 1.0 x 10^7 N/C * e = 1.6 x 10^-19 N.

To learn more about magnitude
https://brainly.com/question/24468862
#SPJ4

Coal of these is an example of a non-renewable source.

The correct option is B.

A resource can be classified as regenerative or nonrenewable based on whether it can replace itself in the rates it is used up or whether it has a finite supply. Forestry, wind, and solar energy are examples of renewable resources, whereas gas and coal are examples of non-renewable resources.

Natural replenishment of non-renewable water resources either takes a very long period or does not occur at all. The 'fossil waters' are included in this. The hydrological cycle makes renewable water resources, which include fresh water like lakes and streams and groundwater aquifers, rechargeable until they are overused.

To know more about Non-renewable resource visit:

https://brainly.com/question/30178642

#SPJ4

The complete question is -

Which of these is an example of a non-renewable source?

a) Trees

b) Coal

c) Water

d) Wind

Explanation:

a) power = energy/time

     taking time in seconds: 16 x 60 min x 60 sec  =57600 s

   now:

60 W = E/57600 s

E = 3456000 J or 3456 KJ

b) time: 45 x 60 s = 2700 s

        P = E/t

     1500 W = E/2700

E = 4050000 J or 4050 KJ

c) efficiency = (output energy/input energy) x 100

2.3% = (X/3456000) x 100

X = (2.3/100) x 3456000

X = 79488 J

The time period of its simple harmonic motion is 0.5 second, if the mass on a spring completes 8 oscillations in 4 seconds.

The time period of a wave is defined as the time required to complete one one oscillation or cycle. One oscillation is when a wave particle repeats its position in a path.  On the other hand number of oscillation in one second is called frequency.

A motion in which restoring force in a body is directly proportional to the distance of the body from its mean position, is called simple harmonic motion.

As per the question statement, time required to complete 8 oscillation = 4.0 sec

Then, time required to complete 1 oscillation = 4/8 = 0.5 second.

To know more about mass, here

https://brainly.com/question/19694949

#SPJ4

The lowest resonant frequency of this pipe is approximately 58 Hz.

What is frequency?

Frequency is a measure of how often a particular event occurs or a certain value appears in a set of data. It is usually expressed as a number of occurrences or a percentage of the total. Frequency is a useful concept in statistics and probability theory as it can provide insight into the underlying data and help to draw conclusions about the data.

The speed of the sound is:

[tex]$v =331 \sqrt{1 + \frac{T}{273} }[/tex]

[tex]$v =331 \sqrt{1 + \frac{37}{273} }[/tex]

v = 352.72 m/s

The length of the pipe is:

L = 5.0 ft = 1.524 m

The wavelength is:

λ = 4L

= (4)(1.524)

= 6.096 m

[tex]$f = \frac{v}{\lambda}[/tex]

[tex]$ f =\frac{352.72}{6.096}[/tex]

The wind on Neptune can blow up to 1,500 miles per hour.

Neptune is the eighth and most distant planet from the Sun, and it is also the third most massive planet in the solar system. It is impossible to see it without a telescope due to its great distance from Earth. It looks like a tiny, indistinct blue-green disc through a micro telescope. The symbol serves as a designation.

A son of the Titan Cronus (the Roman god Saturn) and a brother of Zeus, Neptune is named after the Roman sea god, Poseidon, who is also known by his Greek name Poseidon (the Roman god Jupiter). Through the use of a telescope, it was the second planet discovered.

Learn more about Neptune

https://brainly.com/question/9048375

#SPJ4

The frequency of the force at which the object will vibrate with an amplitude of 0.440m is f ≈ 5.2 Hz.

What is frequency?

Frequency is a concept in physics that describes the number of times a repeating event occurs in a given period of time. It is a scalar quantity and is measured in units of hertz (Hz), where 1 Hz is equal to one event per second. The frequency of a wave is the number of oscillations or cycles that occur in a given period of time, and it is the reciprocal of the period (the time it takes for one cycle to occur).

To determine the frequency at which the force will make the object vibrate with an amplitude of 0.440m, we can use the equation for the natural frequency of a damped harmonic oscillator:

f = (1 / (2 * pi)) * sqrt ( k / m)

where f is the frequency of the vibration, k is the spring constant, m is the mass of the object and pi is the mathematical constant pi. Given that the spring constant is 6.30 N/m and the mass of the object is 0.150 kg, we can substitute these values into the equation to find the natural frequency of the system:

f = (1 / (2 * pi)) * sqrt ( 6.30 N/m / 0.150 kg)

f = (1 / (2 * pi)) * sqrt ( 42 N/m/kg)

since damping is negligible, the frequency of the vibration will be the same as the natural frequency of the system.

f = (1 / (2 * pi)) * sqrt ( 42 N/m/kg)

The frequency of the force at which the object will vibrate with an amplitude of 0.440m is f ≈ 5.2 Hz.

To learn more about frequency from the given link:

https://brainly.com/question/26146342

#SPJ4

It travels below half the distance in 1⁄2 the time required to reach the surface while remaining above the window-to-ground halfway point.

The amount of time that something happens, undergoes a procedure or stays the same: duration.: a non-spatial continuum where events succeed one another in time from the past through the present to the future

time is a continuum without spatial dimensions that can be measured or quantified. Time is a philosophically intriguing concept that is also the focus of mathematical research.

To know more about time visit :

https://brainly.com/question/19979064

#SPJ4

A compass needle is used to detect magnetic fields and will be deflected when placed near a wire that carries an electric current.

When charge flows into a resistor, the current flowing through the resistor generates a magnetic field in the clockwise direction as seen from the end of the wire through which the current is flowing. This will cause the compass needle to be deflected in the clockwise direction.

When charge flows out of a resistor, the current flowing through the resistor generates a magnetic field in the counter-clockwise direction as seen from the end of the wire through which the current is flowing. This will cause the compass needle to be deflected in the counter-clockwise direction.

In summary, when charge flows into the resistor, the compass needle will be deflected in the clockwise direction, and when charge flows out of the resistor, the compass needle will be deflected in the counter-clockwise direction.

To learn more about the compass needle deflection at

https://brainly.com/question/18723509?referrer=searchResults

#SPJ4

The distance moved by the truck along the ramp as it stops is 72.9 m.

The distance moved by the truck before coming to stop is determined from the acceleration and initial velocity of the truck.

The acceleration of the truck is calculated by applying Newton's second law of motion as follows.

F = ma

where;

a = F / m

a = ( -300,000 ) / ( 60,000)

a = -5 m/s²

Now, we will apply the third kinematic equation to calculated the distance moved by the truck before coming to a stop;

v² = u² + 2as

where;

When the truck comes to a stop, the final velocity, v will be zero.

0 = u² + 2as

0 = (27²) + (2)(-5)(s)

= (27²) - 10s

10s = 27²

s = ( 27² ) / 10

s = 72.9 m

Learn more about distance here:

https://brainly.com/question/29149735

#SPJ1

When a rock is thrown and it takes 6 seconds to hit the ground, it travelled 176.4 meters.

Acceleration of free fall is the acceleration at which a body falls when only the gravitational forces of the earth is acting upon it. It is represented by the letter g, and its value on the earth's surface is 9.8 m/s².

Time taken to hit the ground by the rock: Δt = 6 seconds.

Hence,  it travelled a height of = 1/2 × gΔt²

= 1/2 × 9.8 × 6² meter

= 176.4 meters.

Hence, , it travelled 176.4 meters.

Learn more about acceleration here:

https://brainly.com/question/13191643

#SPJ1

The mass would gain twice the kinetic energy it did in the scenario above if the spring were compressed by 14.1 cm.

A particle or perhaps an item that is currently motion has a type of energy called kinetic energy. An item acquires kinetic energy when work, which involves the transmission of energy, is performed on it by exerting a net force.

A spring's energy reserve is proportional to the square of the compression, x.

PE of compression = 0.5kx^2 where k is a constant to do with how easy it is to compress the spring.

So 0.5d^2 gives a KE of value Q

If you double Q you get 2Q and get 0.5D^2 where D is the new compression

So 0.5d^2/0.5D^2 = Q/2Q

d^2/D^2 = 1/2 which means that D^2 = 2d^2 or D = d(sqrt2)

Therefore, the new compression is roughly 1.414 times that of the old one.

Easiest method for recalling is that KE is proportional to sqrt(d)

To double KE you need to compress the spring sqrt2 times as much as before.

Hope this helps.

PE of spring = stored energy = (1/2)kx^2 = (1.2)mv^2

So kx^2 = mv^2

x^2 = (m/k)v^2

x is proportional to v

If x is doubled, v is doubled, and the KE is quadrupled.

the distance would then be ? 2*d or 1.41d = 1.41(10) = 14.1 cm

To know more about kinetic energy visit :

https://brainly.com/question/26472013

#SPJ4

The time taken to reach ground will be 4 sec, stone hits 20 meters from base of cliff, and final velocity in Y axis is 39.2 m/s.

The direction of a body or object's movement is defined by its velocity. In its basic form, speed is a scalar quantity. In essence, velocity is a vector quantity. It is the speed at which distance changes. It is the displacement change rate.

Given:

Speed of stone = 5.0 m/s

Hight = 78.4 m

(a).

The stone is horizontally thrown, the initial vertical velocity will be zero.

[tex]h=u_y(t)+\frac{1}{2} gt^2[/tex]

[tex]78.4=0(t)+\frac{1}{2} (9.8)t^2[/tex]

[tex]78.4=4.9t^2[/tex]

[tex]t^2=16[/tex]

[tex]t=4sec[/tex]

(b).

Now, Range (R) will be,

[tex]R=u_x(t)[/tex]

[tex]R=5*4[/tex]

[tex]R=20 meters[/tex]

(c).

The horizontal component of velocity will still remain 5 m/s because there is no acceleration in X axis.

But in Y axis, we can say,

[tex]u_y=u_x+gt[/tex]

[tex]u_y=0+9.8(4)[/tex]

[tex]u_y=39.2m/s[/tex]

To know more about velocity visit:

https://brainly.in/question/46392825

#SPJ4

The position of its lamp when the patient is positioned 1.0 m from the mirror is 17cm.

The mirror is the concave radius of curvature of mirror R = 30 cm

Distance between the mirror and the patient = 1.2 m

We need to find out the distance of lamp from the mirror.

Focal length = radius/2

Focal length= 15cm

Using formula:

[tex]1/s+1/s'=1/f[/tex]

On solving:

[tex]1/s=s'-f/fs'[/tex]

[tex]s=fs'/s'-f\\s=15*120/120-15\\s=17cm[/tex]

What is the formula for calculating focal length?

The focal length is half the radius of curvature and is as f=R2 where f is the focal length, and R is the radius of curvature.

How do you apply the thin lens equation?

To predict exactly what a lens will do, we can use the thin lens equation: (1/do) + (1/di) = 1/f. In this equation, do is the object distance or the distance of the object from the center of the lens. Di is the image distance or the distance to the image that the lens produces from the center of the lens.

Therefore, the position of its lamp is 17cm.

To know more about the thin lens equation:

https://brainly.com/question/12675009

#SPJ4

The orbital plane of the earth around the Sun is known as the ecliptic or ecliptic plane a path along the ecliptic can see against a background of stars from earth as the Sun moves around the celestial sphere.

Ecliptic in astronomy is the large circle that represents the Sun's apparent movement through the constellations over the course of a year from another angle it is the representation of Earth's orbit around the Sun on the celestial sphere Along the ecliptic the constellations of the zodiac are organized.

The sun's journey is indicated by the ecliptic a fictitious line in the sky Along with the moon planets also follow the ecliptic It designates the plane of the solar system by projecting Earth's orbit onto the cosmic sphere.

To know more about ecliptic visit:

brainly.com/question/3473428

#SPJ4

To determine the greatest force P that can be applied to the frame, we need to analyze the forces acting on point A. The force P is acting on the frame at an angle of 45 degrees, and we know that the largest force resultant that can act on point A has a magnitude of 5 kN.

We can use vector addition to find the magnitude of the force resultant at point A. We can resolve force P into its x and y components, Px and Py, using trigonometry.

Px = P * cos(45) = P * 1/√2 = P/√2

Py = P * sin(45) = P * 1/√2 = P/√2

The force resultant at point A is the vector sum of Px and Py.

|F_resultant| = √(Px^2 + Py^2) = √((P/√2)^2 + (P/√2)^2) = √(P^2/2 + P^2/2) = √(P^2) = P

Since the force resultant at point A cannot exceed 5 kN, the magnitude of P must also be less than or equal to 5 kN. Therefore, the greatest force P that can be applied to the frame is 5 kN.

Learn more about Force here: https://brainly.com/question/28875770

#SPJ4

The response to the question is that a car's wheel rotates at a rate of 1.44 radians per second.

The angular velocity (w), a vector quantity in a uniform circular motion, is determined by dividing the displacement (), also a vector quantity, by the change in time (t). Speed is equal to |w|R and is computed by dividing the arc length traversed (S) by the time difference (t).

A scalar measurement of the revolving object is its angular speed. A vector representation of the rotor blade is the angular velocity. Only the degree of an angle's speed is specified. The direction and magnitude are both specified by angular velocity.

To know more about angular speed visit:

https://brainly.com/question/19089814

#SPJ4

According to the question,

The speed of the electron when it is 10.0 cm from charge 1 is 11.33 m/s.

What is the electron?

The electron is a subatomic particle that carries a negative electric charge. It is the lightest of all the particles that make up matter. Electrons are found in all atoms, and they are responsible for chemical bonding between atoms. Electrons are found in a cloud surrounding the nucleus of an atom, and they are always moving. The size of the electron is much smaller than the size of the nucleus. Electrons travel in orbits around the nucleus, and each orbit has a certain amount of energy. Electrons are also involved in many physical and chemical reactions, such as the production of heat, light and electricity. Electrons play an important role in the structure of atoms, and they are essential for life as we know it.

To learn more about electron

https://brainly.com/question/9317875

#SPJ4