How can you calculate the mechanical advantage a simple machine provides?


•divide the output force by the output displacement

•divide the output displacement by the input displacement

•Simple machines do not provide a mechanical advantage.

•divide the output force by the input force

Mass is a scalar quantity, which means it is a physical quantity that has only magnitude and no direction.

Unlike vector quantities, such as velocity or acceleration, scalar quantities do not have a direction associated with them. Mass is a measure of the amount of matter in an object and it is always a positive value, regardless of the direction of the object.

The unit of mass is the kilogram(kg) or pound(lb) etc. It is an important physical quantity in physics and is used to calculate the weight of an object under the influence of gravity and also used to calculate the force required to move an object. It's a scalar quantity because it doesn't have any direction.

It's just a number that represents how much matter is present in an object, as opposed to vector quantities like velocity or acceleration which have both magnitude and direction.

To learn more about vector or scalar at

https://brainly.com/question/21925479?referrer=searchResults

#SPJ4

The maximum kinetic energy of a box sliding from the top of a ramp to the bottom is: at the bottom.

The energy of motion, or kinetic energy, may be seen in the movement of an item or subatomic particle. Kinetic energy can be discovered in every moving object and particle. Kinetic energy is generated when anything moving, such as a person walking, a baseball rising through the air, a piece of food dropping from a table, or a charged particle in an electric field. The object's squared velocity determines the kinetic energy. As a result, an object's kinetic energy quadruples when its velocity doubles. Kinetic energy is divided into five kinds radiative, thermal, sound, electrically, and mechanic.

Kinetic energy of an object can be expressed in terms of its mass m and velocity v as:

K.E = 1/2 × m × v²

Thus higher the velocity, greater will be the Kinetic energy. Now, as the box moves along a ramp from top to bottom, its velocity increases and so does the K.E.

Hence, kinetic energy is maximum at the bottom

To know more about kinetic energy refer to:

https://brainly.com/question/8101588

#SPJ4

The complete question is as follows:

The maximum kinetic energy of a box sliding from the top of a ramp to the bottom is A) at the top. B) at the bottom. C) at the exact middle of the ramp D) stored equally within the box at all locations.

Answer:

C

Explanation:

C is the usual case

Answer: ABSOLUTE ZERO

Explanation:

The acceleration of gravity on the Moon is only one-sixth of that on Earth. If we hit a baseball on the moon with the same effort(and at the speed and angle)that we would on earth, the ball would land 6 times as far. The ball on the moon will cover 6 times more distance than Earth.

The force that pulls items toward the center of a planetary or other body is known as gravity. The gravitational pull maintains each of the planet in orbit about the sun. The degree to which a coordinate in space-time is invisibly bent determines the intensity of the gravitational "field" at any given place in space or time. Massive items tumble down these bends in the direction of one another. The stronger the attraction between items, the more matter there is, and the closer together things are. And unlike electricity and magnetism, which may either repel or attract, gravity always draws objects together.

Speed = distance travelled/Time required speed

Speed = d/t

Acceleration of gravity on earth=9.8 m/s²

Acceleration of gravity on Moon=1.62 m/s²

So the maximum height of ball will be the ration of these both gravity.

To know more about gravity refer to:

brainly.com/question/940770

#SPJ4

The mole, commonly known as mol, is a SI unit used to calculate how many particles are present in a given substance. 6.022*10^23( it's a standard value) atoms or other fundamental building blocks, such as molecules, make up one mole.

One mole of a given chemical is equivalent to 6.022 x 10^23. (such as atoms, molecules, or ions). The mole concept can be used to convert between mass and particle quantity.

The ratio of atomic mass units to grams affects Avogadro's number, or the number in a mole. A mole of hydrogen atoms weighs around one gram in comparison to one hydrogen atom's mass, which is approximately one unit. 6.022 10^23 is referred to as "Avogadro's constant" or "Avogadro's number."

Learn more about Moles Visit: brainly.com/question/30236487

#SPJ4

The kinetic energy for the object which has a mass m of 10 kg with velocity of 1 m is 5 m/s.

The kinetic energy of an object increases with its mass. v indicates the object's speed. This relationship shows that an object's kinetic energy is inversely proportional to the product of its mass and velocity.

Possible justification: Because kinetic energy and speed have a strong relationship, an object's kinetic energy rises as its speed does. Kinetic energy's nonlinear (square) proportional relationship with speed (KE v2) 1. When an object's speed doubles, its kinetic energy increases by a factor of four. 2.

The kinetic energy decreases by a factor of four as the object's speed is cut in half.

K.E = 1/2 * m * v^2

K.E = 1/2 * 10 * 1^2

K.E = 1/2 * 10

K.E = 5

Learn more about kinetic energy Visit: brainly.com/question/25959744

#SPJ4

Four ways of solving an equation are 1) Graphical method 2) Elimination method, 3) Substitution method 4) Cross multiplication method

Graphical method: To solve linear equations graphically, first draw the graph for both equations in the same coordinate graph and locate the intersection point on the graph.

Elimination method: In this method, any of the coefficients is first eliminated by equating. After eliminating the coefficient, the equations are resolved to get the other equation. For example:

3x + 2y = 9 ———–(i)

x – y = 6 ———–(ii)

Here, if equation (ii) is multiplied by 3, the coefficient of “x” will become the equal and can be eliminated.

So, multiply equation (ii) × 3 and then subtract equation (i)

3x + 2y - 9 - 3x-3y-18 = 0

y = -9/5

Now, put the value of y = 1.8 in equation (ii).

So, x – 1.8 = 6

x = 4.2

Substitution method: To solve a linear equation using this method, first, take the value of one variable separately from any of the equations. Then, substitute the value of this variable in the second equation and solve it.

Cross multiplication method: Linear equations can be easily solved using this method. In this technique is used to simplify the solution. Following formula is used for solving 2 variable equation:

x /(b₁ c₂ − b₂ c₁) = y / (c₁ a₂ − c₁ a₁) = 1 /(b₂ a₁− b₁a₂)

To know more about Graphical method, here

https://brainly.com/question/29193266

#SPJ4

Yes, the dimensional formula of work and torque is the same. It depends on the unit of work and torque.

The torque is described as the turning effect of force and is a vector quantity. It is based on the force's strength and the angle at which it is perpendicular to the line of action. The unit of torque is N.m.

Work is described as the force applied over a certain distance.  Work is a mechanical manifestation of energy. The standard unit of work is the joule or N.m.

As the units of both the physical quantities are the same, the dimensional formula is also the same.

To know more about dimensional formula:

https://brainly.com/question/20353829

#SPJ4

To solve systems of equations, three approaches are used: graphing, substitution, as well as elimination.

To solve systems of equations, three approaches are used: graphing, substitution, as well as elimination. Manually graph the provided equations and discover the point(s) that they all cross to solve a system. The coordinate of just this point will provide you with the values for exact variables you are attempting to solve for.

There are four methods for resolving one-step equations: adding, subtracting, multiplying, and dividing. Both sides of either equation will remain equal if simply add the same integer to both sides. Both sides of either equation would remain equal when we deduct the same integer from both sides.

To know more about equation

https://brainly.com/question/20523426

#SPJ4

The mass of the second box car from the calculation is  22317 Kg.

We have to note that we can be able to obtain the momentum as the product of the mass and the velocity of the object that is to be studied. In the case of the cars that we have here;

The momentum before Collison = Momentum after collision

We would then have from the question;

(10300 * 19) + (M * 0) = (10300 + M) * 6

Let the mass of the second box car be M

Then;

195700 = 61800 + 6M

M = 22317 Kg

Learn more about momentum:https://brainly.com/question/24030570

#SPJ1

The potential energy of the object is 9.8 Joule. The result is obtained by using the formula for kinetic energy.

Potential energy is the energy of an object due to its position.

The energy of an object in a gravitational field is called gravitational potential energy. It can be expressed as

U = mgh

Where

Suppose we raise a object with a mass of 1.0 kg to 1.0 m high. Find the potential energy!

We have

The Earth's gravitational field is 9.8 m/s².

The potential energy would be

U = mgh

U = 1.0 × 9.8 × 1.0

U = 9.8 Joule

Hence, the object has the potential energy of 9.8 Joule.

Learn more about potential energy here:

brainly.com/question/19575641

#SPJ4

Blue, indigo, cyan, green, yellow, oranges, and red are the hues of visible light. Red has the different energy levels since it has the shorter wavelengths of all visible light.

Violet has the most energy, whereas red has the least. Just as there are frequencies our ears can't hear, there are many other types of light besides red and violet that our eyes can't see. Radio waves, which already have wavelengths thousands of times longer compared to visible light, are at one spectrum end of the spectrum.

Gamma rays which have the maximum energy in the visible radiation, with long radio waves Along with visible light, the sun also produces infrared and ultraviolet radiation. Only a narrow waves or particles at different, from 380 nm to 750 nm, are covered by the visible portion of the electromagnetic spectrum.

To know more about wavelengths visit :

https://brainly.com/question/13533093

#SPJ4

A meter is the metric system's standard unit of length (m). One meter (m) is divided into 100 equal centimeters (cm).

The International System of Units, abbreviated SI in all languages and sometimes pneumatically as the SI system, is the modern version of the metric system and the world's most widely used measurement system. The SI is a coherent system of measurement that begins with seven base units: the second (symbol s, the unit of time), the metre (m, length), the kilogram (kg, mass), the ampere (A, electric current), the kelvin (K, thermodynamic temperature), the mole (mol, amount of substance), and the candela (cd, luminous intensity). These are widely accepted and followed around the world. The SI unit for mass is kilogram, the SI unit for length is meter, and the SI unit for time is second.

Here,

A meter is the standard unit of length in the metric system (m). One meter (m) is equal to 100 centimeters (cm).

To know more about SI unit,

https://brainly.com/question/12750330

#SPJ4

Generally low latency benefits the user because it provides real time closeness with least possible delays in transmitting data digitally, which means option C is correct.

Latency refers to the time lag which happens when a digital data is transferred from its origin location to the destination point. Low latency means that there will be less delay and this would mean the closeness between the digital speed and real time speed. High latency implies that there are many delays in data packet transmission. It is determined using the formula given below:

Latency = Propagation time = Distance to be covered / Propagation speed

Thus, low latency will enable quick processing and transfer of data across a network connection. It enables better online connection, calls and meetings.

Learn more about latency at:

brainly.com/question/30227967

#SPJ4

Refer to complete question below:

How does lower latency benefit the users connected to a network?

Radio waves, microwaves, infrared rays, visible rays, ultraviolet rays, X-rays, gamma rays. Radio waves have long wavelengths and low frequencies, while gamma rays have short wavelengths and high frequencies.

In physics, electromagnetic radiation consists of space-propagating electromagnetic field waves carrying momentum and electromagnetic radiation energy. These include radio waves, microwaves, infrared rays, light, ultraviolet rays, X-rays, and gamma rays. The seven Electromagnetic Waves in ascending order of frequency and descending order of wavelength are:

Learn more about Electromagnetic Waves

brainly.com/question/29774932

#SPJ4

The rate of change of momentum equals the mass multiplied by the rate of change of velocity. Newton's Second Law may thus be recast as force = rate of change of momentum.

The change in momentum (p) of an object is defined as the change in the product of its mass and velocity. To modify the momentum of an item, a force is necessary. This applied force can change the direction of the item or enhance or reduce its momentum.

The rate of change (ROC) of anything relates to how rapidly it changes over time. It is therefore the speeding up or slowing down of changes.

Learn more about change in momentum

https://brainly.com/question/29156588

#SPJ4

The average force exerted on the ball during the collision is 5.3 Newtons.

Force is a concept in physics that describes the interaction between two bodies. It is a vector quantity, meaning it has both a magnitude (amount of force) and a direction. Force can cause a change in an object's shape, speed, and direction of motion. Examples of forces include gravity, friction, tension, and electromagnetic forces. Forces can be used to push, pull, twist, and bend objects. Force is measured in newtons (N), and is the product of mass and acceleration. Force is an essential part of understanding the universe and how objects interact with each other.

Momentum is defined as mass multiplied by velocity,
and thus the initial momentum of the ball is 0.2 kg x 34 m/s = 6.8 kg m/s. After the collision, the momentum of the ball is 0.2 kg x 26 m/s = 5.2 kg m/s.
Thus, the change in momentum is 6.8 kg m/s - 5.2 kg m/s = 1.6 kg m/s.
The average force exerted on the ball during the collision can be calculated by dividing the change in momentum by the time of the collision:
Average force = 1.6 kg m/s / 0.3 s = 5.3 N.
This means that the average force exerted on the ball during the collision is 5.3 Newtons.

To learn more about force
https://brainly.com/question/12970081
#SPJ4

The charge on the yellow sphere is positive because the net electric force on the blue sphere has a value of F and is oriented in the y direction.

What is class 12 of Gauss's law?

According to Gauss's law, each closed surface's electric flux is equal to the net charge it contains divided by the vacuum's permittivity, or =Q.

What makes it the Gauss law?

Gauss' Law demonstrates how electric fields, E, can be produced by static electricity, q. Gauss' Law, which bears the name of German physicist Carl Friedrich Gauss, is the third of Maxwell's four equations. According to Gauss' Law, an electric charge, qv, or static electricity, produces an electric field, E. (voltage).

To know more about electric force visit:

brainly.com/question/2526815

#SPJ4

The mole, also referred to as mol, is a SI unit used to measure the number of particles in a specific substance. One mole is composed of 6.022*10^23 atoms or other basic building components, such as molecules.

A mole is equal to 6.022 x 10^23 of a given substance (such as atoms, molecules, or ions). Utilize the mole concept to translate between mass and particle amount.

The number in a mole, or Avogadro's number, is influenced by the proportion between atomic mass units and grams. Compared to one hydrogen atom's mass, which is around one unit, a mole of hydrogen atoms weighs about one gram. The quantity 6.022 10^23 is known as "Avogadro's constant" or "Avogadro's number."

Learn more about Mole Visit: brainly.com/question/30236487

#SPJ4

Relative dating is the process of determining the relative order of past events, without necessarily determining their absolute age. This is done by comparing the positions of different layers of rock and determining which layers are older or younger. For example, if rock layer A is on top of rock layer B, then rock layer A is younger than rock layer B.

Absolute dating, on the other hand, is the process of determining a specific date for an event or artifact. This is done through the use of methods such as radiocarbon dating or potassium-argon dating. These methods involve measuring the decay of certain isotopes and comparing them to known decay rates.

In a lab report, you would likely include a brief introduction to the concepts of relative and absolute dating, a description of the methods and materials used in the lab, a presentation of the data collected, and an analysis and interpretation of the results. You may also include a discussion of any limitations or sources of error in the methods used and a conclusion summarizing your findings.

Horsepower and RPMs, which are both dependent on measurement or some other method, are used to calculate torque for motors. Use this equation to calculate torque (in ft-lb) for motors: T = rpm/(HP*5252).

Result for an image How can you figure out how much torque is needed to spin a shaf,

To get load torque, divide the pressure (F) by the pulley's radius, which is the distance from the rotating axis (r). The needed torque for the operation is (20 N x 0.05 m = 1.0 Nm if the load's mass (green boxes) is 20 Newtons and the pulley's radius is 5 centimeters distant.

The power that can turn an item about its axis is measured as torque. In linear kinematics, force is what makes an object move faster. Likewise, an angular acceleration is brought on by torque. The rotating counterpart of linear force is thus what torque is.

to know more about torque visit:

https://brainly.com/question/6855614

#SPJ4

The magnitude in simple way defined as "distance or quantity." In the sense of motion, it depicts the absolute or relative direction or size in which an object moves. It is used to describe the scope or size of something.

A quantity's magnitude is a number that indicates how large or small a measurement of that quantity is in comparison to a specified reference value (that reference value is most of the time taken to be zero). Magnitude is defined in physics as the maximum extent of size and direction of an object. Magnitude is simply a numerical value, whereas intensity conveys the concept of impact. In physics, it's generally refers to distance or quantity.

Learn more about magnitude here: https://brainly.com/question/24468862

#SPJ4

The "means of disconnect" criterion (NEC 210.4b) for multi-wire branch circuits merely stipulates that there must be a method of disabling all legs simultaneously. Typically, the 2-pole (240v) circuit breaker in the panel serves as that, which is acceptable and satisfies the criteria.

What must be available to unplug every gadget from ungrounded conductors?

All ungrounded conductors in the panelboard where the branch circuit originates must have a way to be simultaneously disconnected, according to Section 210.4(B).

A multi-wire branch circuit is what?

NEC Article 100 states that a multiwire branch circuit is made up of a grounded conductor with an equal voltage between it and each ungrounded conductor, as well as two or more ungrounded conductors that have a voltage between them.

To know more about circuits visit:

brainly.com/question/27206933

#SPJ4

40 J is the kinetic energy of a mass of 5. 0 kg moving at 4. 0 m s.

Kinetic energy is the energy that an object possesses due to its motion. It is defined as the work required to accelerate an object of specified mass from rest to a specified velocity. After the body acquires this energy during acceleration, it retains this kinetic energy as long as the velocity does not change.

We know that kinetic energy =  mv²/ 2

So kinetic energy of given object = 5*4*4/2

                                                          = 40

To know more about kinetic energy visit:

https://brainly.com/question/1576461

#SPJ4

The amount of work done to move a charge is 4 J.

The amount of work done to move a charge of 0.2 C through a distance of 2m at an angle of 60 with respect to the x axis is calculated as follows;

W = Fd cosθ

where;

W = (EQ) x d cosθ

where;

The amount of work done to move a charge is calculated as;

W = ( 20 x 0.2 0 x ( 2 ) x cos (60)

W = 4 J

Learn more about work done here: https://brainly.com/question/8119756

#SPJ1

Material or an item that creates a magnetic area is called a magnet. The domain actually defines the all the attractive and repulsive property of all the magnet.

As per the definition we know that the properties and interaction of magnets are called magnetism.

The force which is created during the attraction and repugnance of magnets towards different magnets or objects is called magnetism. Generally it results because of the existence of the electric field.

It is the most essential effect that causes a shift in the magnetic field that influences the electric field and vice versa.

Hence, magnetism is the property of magnets interacting in the field.

Learn more about magnetism:

brainly.com/question/19542022

#SPJ4

The magnitude isn't always 1. It's +ve or zero. A vector with a -ve sign in front of it has the same magnitude but is pointing in the opposite direction. The - sign is part of the magnitude, not the direction.

A "resultant vector," like all vectors, is neither positive nor negative. It has a magnitude (which is greater than zero) and a direction. Scalars are what "components" are. They are vector projections onto the x and y axes (or other axes). They are not magnitudes because the angle between the vector and the axes can be positive or negative (as you note). The direction of the projection along the axis is indicated by the + or - sign.

"Component vectors" are vectors that add up in the x and y directions to the given vector. They have magnitude and direction because they are vectors, but the only possible directions are +x/-x and +y/-y. They are not +ve or -ve because these terms have no meaning.

Learn more about vector here: https://brainly.com/question/30214996

#SPJ4

Answer: c

Explanation:

I say "C" because we use technology to communicate over long distances instantly, so we have progressed in making rockets, shoes, health/high gene, etc.

          Technology is a branch of science which enables human life make easier with practical purposes. Technology improve human life in many way.  c,d ,e and f these all  improves human life by technology development.

Computers discovers new life to human life daily activities communication over the great distance , research and acess tons of information at fingertips. Computer has open source and cheap. Airplanes wipes the travel barrier for longer distance. We can travel longer distances with in hours.

Discovery of nearby galaxies gives lot of information about our galaxy shapes and nature of universe. One of best invention in human history is medical diagnostics, which enables human to detect diseases at early stages give better treatment to save life.

Learn more about, technology

https://brainly.com/question/25110079