Answer:
yes
Explanation:
They can take tiles with a generator that can convert the squeezing energy. ... The generator underneath the tiles will convert the squeezing energy into electrical energy that will power the flashlight
A tee requires three studs and three cripples.
O TRUE
O FALSE
Answer:
will you please explain more?
Fill in the blank to correctly complete the statement below.
The problem faced by Galloping Gertie, the failed bridge across the Tacoma Narrows, was caused because the
engineers did not follow the perform tests on the prototype/testing/ step in the engineering design process.
PLZZZZZ BRAINLEST FOR EVERYONE (science)
Answer:
A because it's positioned at the hilltop, which results in an increased in kinetic energy. you can actually apply this to the real world by placing a marble on a steep hill, then try to place it on a flat surface.
Identify renewable energy sources you will propose. Explain the key elements to your solution and the basic technical principles involved.
Answer:
A renewable electricity generation technology harnesses a naturally existing energy. But they have other features that a few fringe customers value.
Explanation:
1. How is high-speed internet typically transmitted around the world? over telephone wires b. through fiber optic cables c. beamed wirelessly to homes d via satellites
Answer:
High speed internet is typically transmitted around the world;
b. Through fiber optic cables
Explanation:
High speed internet is typically transmitted through fiber optic cables such as the Submarine Cables that makes connection through two cables that connects USA to Europe over the Atlantic Ocean, and the Middle East to Europe Terrestrial Cable Systems (MEETS) which is a cable network of 1,400 km and is being built to have an initial capacity of 200 Gbps
Other example of fiber optic cable assisted internet broadband transmission are the Diverse Route for European and Asian Markets (DREAM) terrestrial cable that connects Germany, Kazakhstan, Russia, and China, TEA NEXT that provides connection between borders on the East and West of Russia and Euro-Russia-Mongolia-China (ERMC) terrestrial cable
High-speed internet typically transmitted around the world through the use
of fiber optic cables.
Fiber optic cablesThese are connections which help transmit internet from one place to
another. It is a very fast method with a very low lag time. This is why it's used
for high speed internet transmission.
These cables are also able to withstand high traffic while other forms can't
do it thereby making option B the most appropriate.
Read more about Fiber optic cables here https://brainly.com/question/116766
Someone please help me and explain this in detail!!!!!
Element X has three electrons in its outermost orbit.
Element Y has seven electrons in its outermost orbit.
What is the chemical formula of the ionic compound formed by these elements when they react together? (Use X and Y as the chemical symbols.)
Answer: The chemical formula of the ionic compound formed by these elements when they react together is [tex]XY_3[/tex].
Explanation:
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
Here element X is having an oxidation state of +3 as it can lose 3 electrons from its outermost orbit called as [tex]X^{3+}[/tex] cation and element Y is having an oxidation state of -1 as it can gain one electron in its outermost orbit called as [tex]Y^{-}[/tex] anion. Thus they combine and their oxidation states are exchanged and written in simplest whole number ratios to give neutral [tex]XY_3[/tex].
What system transfers the power created by the engine to the
wheels?
A) Powertrain
B) Chassis
C) Electrical/Electronic
D) Driveline
Engineers use the following tools to perform their duties. science and math, math and English, science and English, math science , and English
I wold say they use math, physics, and science primarily
Which of the following was one of the first uses of the electric light bulb?
as lights for Galloping Gertie
as searchlights at the New York World's Fair in 1893
as a searchlight at the Chicago World's Fair in 1893
as lights for the Tacoma Narrows bridge
Answer:
As lights for the Tacoma Narrows bridge
Explanation:
After Thomas Edison discovered electric appliances, light bulbs were produced for the streetlights as well. The first town in the United States to triumphantly display electric illumination was Cleveland, Ohio, with 12 electric lamps around the Public Square street system on April 1879. The light bulb served to stabilize social order after sundown.
Answer: As lights for the Tacoma Narrows bridge
Explanation: After Thomas Edison discovered electric appliances, light bulbs were produced for the streetlights as well. The first town in the United States to triumphantly display electric illumination was Cleveland, Ohio, with 12 electric lamps around the Public Square street system on April 1879. The light bulb served to stabilize social order after sundown.
What is 84 inches and 1/2 plus 348 inches
Answer:
432 1/2 inches
Explanation:
Combining two strings is called
Answer:
The appropriate response is "Concatenation". A further explanation is given below.
Explanation:
Two or much more strings are almost always concatenated besides space-saving purposes, and therefore could be acknowledged as either a single product. A straightforward example that demonstrates concatenation should be to figure out what it means. How and why that ends up making a term separate from several other phrases is that almost all the messages are stacked together without any open space between each one.Why might a hospital patient prefer to interact with a person instead of robot?
Search for the Heart of the Sea ! Use the blue and red coral to reach the treasure chest. Only use 9 blocks, please help due in a hour.
fyyyodritsisstiistditstieistisdistiesties5ies5iei5s5
A college student volunteers with the elderly in a hospice program and discovers her clients complain of dry skin. She has an idea for a
back-scratching sponge with lotion available through squeezing a bulb. What stage in the product development life cycle is this?
O detailed product design
o product systems design
O product testing
O concept development
Answer:
D
Explanation: She hopes to be able to make this, however she hasn't yet...therefore she is thinking of a concept and it's development
2.
_________ Is NOT a common Injury that an automotive tech may experlence at work.
A) Jaw pain
B) Back pain
c) Leg pain
D) Carpal tunnel syndrome
Which of the following describes the powertrain?
A) The components that generate power.
B) The structural framework of the vehicle.
C) The components of the vehicle that transfer power.
D) The components that power the electrical systems.
It is the responsibility of every employee to ensure that tools are used ____ and____.
A.Properly and Safely
B.Quickly and safely
C.Properly and quickly
D.With supervision and permission
Julio has a personal website where he puts up the scores of ball games he organizes in his neighborhood. A friend tells him that he doesn't need to update the HTML file after each game. He can instead put the scores in a different file and display it from the HTML.
What file format should he put the scores in?
A. JavaScript
B. CSS
C. XML
D. DHTML
Answer:
XML would be the answer.
Explanation:
I believe that this is right on at least edmentum.
Describe carbonation as it applies to the four-stroke engine.
Automobiles have been in use for:
A) Approximately 50 years.
B) Since the 1950's.
C) Over 100 years.
D) Approximately 75 years.
The first inventors of the light bulb, Henry Woodward and Mathew Evans, faced which of the following problems?
The device was not very long lasting
The gas used in the light bulb was polsonous
The patent they tried to file for their invention was not accepted.
The nitrogen gas caused the light bulb to explode,
Answer:
The device was not very long lasting
Explanation:
Henry Woodward and Mathew Evans were two British scientist who invented first light bulb in 1860.
The challenge they faced while inventing light bulb was the log lasting light filament. Earlier filament was made up of carbonized paper which was not long lasting and has light for very less time period. Later they solve it by making carbon fiber filament derived from cotton and got patent for the same invention. But then because of financial issues they sold their patent to Edison.
Hence, the correct answer is "The device was not very long lasting".
What material are the rocker/valve cover gaskets made out of?
Rubber
Cork
Plastic
Copper
In the engineering design process, testing is the least important step.
True
False
Answer:
false
Explanation:
i think the answer is false
Pretend 1% of the population has a disease. You have a test that determines if you have that disease, but it’s only 80% accurate and 20% of the time you get a false positive. Your test comes back positive. How likely is it you have the disease?
Answer:
3.88% of the time
Explanation:
What is the structural stability formula?
Answer:
[tex]K=2J-R[/tex]
Explanation:
Let [tex]R[/tex] denotes the number of sides of a triangle.
Let [tex]J[/tex] denotes the number of joints.
Let [tex]M[/tex] denotes the number of members.
Let [tex]K[/tex] denotes the unknown to be solved.
Now write the structural stability formula:
[tex]K=2J-R[/tex]
Here, design is stable if [tex]M=K[/tex]
Design is unstable if [tex]M<K[/tex]
Design is indeterminate if [tex]M>K[/tex]
Who is good at frequency and graphs??
why it is important to clean all mixing equipment out after mixing paint?
Answer:
Explanation:
It is important to clean your equipment to
1. Make it look good (like who wants dirty equipment right?)
2. You are at risk of leaving paint, which can get mixed into future paints, causing an ugly color.
3. If there are any toxic chemicals in the paint, it is good to clean them out just to make sure.
A. What is the total current of this circuit?
B. What is the current at Lamp 1?
C. What type of circuit is this?
D. What equation rule do we follow to determine total current and currents at Lamp1 and R1 (Look at the equations above)
E. What is the total resistance?
In the car industry, clay models are used to visualize and test new car designs.
True
False
Can somebody help me?? “ what is the approximate frequency of this signal in this time window ?
Answer:
The approximate frequency of the signal is 12 Hertz
Explanation:
Frequency is defined as the number of complete cycles that passes a given point in a given time
One cycle is the motion that describes one complete rotation, such that one cycle is described by the region between successive crest or peaks
Therefore, we have from the diagram;
The number of cycles in 0.75 seconds ≈ 9 cycles
The number of cycles expected to pass in one second = 9 cycles/(0.75 seconds) = 12 cycles/second = 12 Hertz
The approximate frequency of the signal, f = 12 cycles/second = 12 Hertz.
