how long does it take for saturn's equatorial flow, moving at 1500 km/h , to encircle the planet? express your answer using two significant figures.

There are several countries that have a coastline on the Pacific Ocean, including the United States, Canada, Mexico, Peru, Chile, Japan, and Australia.

However, if we had to pick just one country, the answer would be Chile. Chile is a narrow country located in South America that stretches over 4,000 km (2,485 miles) along the western coast of the continent. Its coastline borders the Pacific Ocean, making it the country with the longest coastline on the Pacific Ocean.

Thus, Chile is the country that has a coastline on the Pacific Ocean. It is important to note that there are other countries with a coastline on the Pacific Ocean as well.

To know more about coastline, click here

https://brainly.com/question/12717872

#SPJ11

The frequency 100026 Htz will be the Doppler detection system measure coming from the cell , and  52 Htz be the observed beat frequency .

Velocity of sound in blood will be = 1500 m/s

Solving for A :

Frequency detected by the blood cells

                    F' = F Vsound + V / Vsound

                     = 100000 ( 1540 + 0.4 )

∴ F' = 100026 Htz.

Solving for B :

Frequency detected by the detector must be

                   F''  = F (V sound ) / Vsound -v

                          = 100026 × 1540 / 1540 - 0.4

                          = 100052 Htz .

Solving for C :

Beat frequency will be

                      F'' - F

                   = 100052 - 100000

                           = 52 Htz .

frequency is the number of waves that pass through a fixed point in one unit of time in physics. likewise, the quantity of cycles or vibrations gone through during one unit of time by a body in occasional movement. A repeating event frequency is the number of times it occurs per unit of time. For clarity, it is also sometimes referred to as temporal frequency. It is different from angular frequency. The unit of measurement for frequency is hertz, or one event per second.

Learn more about frequency :

brainly.com/question/27151918

#SPJ4

The correct answer is b. The speed of Halley's Comet increases as it nears the Sun.

This is due to the gravitational pull of the Sun, which accelerates the comet as it gets closer. The fastest point of the comet's orbit is at its closest approach to the Sun, known as perihelion. At this point, the comet can reach speeds of up to 70 km/s. However, as the comet moves away from the Sun, its speed decreases again. The slowest point of the orbit is at its furthest distance from the Sun, known as aphelion. At this point, the comet's speed can drop to around 11 km/s. So, the speed of Halley's Comet is not constant, but varies depending on its position in its elliptical orbit around the Sun.

Halley's Comet follows an elliptical orbit around the Sun, with the Sun located at one of the foci of the ellipse. According to Kepler's laws of planetary motion, a planet or a comet moves faster when it is closer to the Sun and slower when it is farther away. This is because the Sun's gravity is stronger when the comet is closer, and weaker when it is farther away.

Therefore, as Halley's Comet approaches the Sun in its elliptical orbit, it experiences a stronger gravitational pull, which causes its speed to increase. Conversely, as it moves away from the Sun, the gravitational pull weakens, causing its speed to decrease.

Hence, the speed of Halley's Comet is not constant, but varies throughout its orbit, with the highest speed being reached at the closest point to the Sun, known as perihelion, and the lowest speed being reached at the farthest point from the Sun, known as aphelion.

To know more about Halley's Comet, please click on:

https://brainly.com/question/30393703

#SPJ11

The magnitude of the net force acting on the object can be calculated using Newton's Second Law of Motion, which states that the net force acting on an object is equal to the product of its mass and acceleration.

Since the surface is frictionless, the object experiences no opposing force, so the only force acting on it is the horizontal force of 4.0 newtons. Therefore, the net force acting on the object is 4.0 newtons. This means that the object will accelerate in the direction of the applied force with an acceleration of 2.0 m/s², which can be calculated by dividing the net force by the mass of the object. In conclusion, the magnitude of the net force acting on the object is 4.0 newtons, and it will accelerate at a rate of 2.0 m/s² in the direction of the applied force.

To know more about horizontal force visit:

https://brainly.com/question/2037071

#SPJ11

The correct option is E. Tesla⋅meter/ampere. μ 0 is the permeability of free space, also known as the magnetic constant. It is a measure of the strength of a magnetic field and has units of Tesla⋅meter/ampere.

Magnetic forces are invisible lines of force that exist between two magnetic objects. These forces are created when electrons in the atoms of these objects align in the same direction. The force of attraction between magnets is stronger than the force of repulsion between magnets with the same poles, or ends. Magnets have a north pole and a south pole, and when two magnets are brought together, the opposite poles will attract each other while the same poles will repel each other. Magnetic materials, such as iron and nickel, can be magnetized permanently when exposed to a magnetic field. Other materials, such as aluminum, copper, and gold, are not magnetized and are known as non-magnetic materials.

To learn more about magnetic
https://brainly.com/question/2279150
#SPJ4

Deceleration is the opposite of acceleration and refers to the slowing down of an object's speed. Therefore, the answer is b. negative.

When an object is decelerating, its acceleration is negative because it is moving in the opposite direction to its initial velocity. For example, when a car is moving forward and then applies the brakes, it starts to slow down. The acceleration of the car in this case is negative because it is moving in the opposite direction to its initial velocity, which was forward. Deceleration is an important concept in physics as it helps us understand how objects move and change their speed. It is also important in fields like engineering and transportation where deceleration rates need to be calculated to ensure the safety of people and equipment. In summary, deceleration is the negative acceleration of an object, which refers to the slowing down of its speed.

learn more about speed here

https://brainly.com/question/3370926

#SPJ11

Increasing the resistance of a light bulb will result in less electrical energy used by the bulb over the same period of time.

The amount of electrical energy used by a light bulb is determined by the formula P = IV, where P is power, I is current, and V is voltage. The resistance of the bulb is related to the current flowing through it, as given by Ohm's law: I = V/R. If the resistance is increased, the current will decrease for a given voltage, and therefore the power, and the amount of electrical energy used over a given time period, will decrease. This is why energy-efficient light bulbs have higher resistance than traditional incandescent bulbs, resulting in less electrical energy consumption.

To learn more about resistance, click here:
https://brainly.com/question/30799966

#SPJ11

As the air temperature rises, the individual particles that make up the air molecules, like nitrogen and oxygen atoms, gain additional kinetic energy. These particles start moving faster and with greater vigor, colliding and bouncing off each other more vigorously.

At higher temperatures, the particles have greater thermal energy, so they spread apart further and the air expands. The hot air particles spread out and fill a larger volume of space. Some of this thermal energy is also transferred to the thermometer, causing it to expand and the liquid inside to rise up the graduated scale.

The hot air particles collide more frequently and forcefully with the molecules in the thermometer, transferring their heat and causing the whole instrument to increase in temperature. As more and more hot air particles surround the thermometer, its temperature continues to rise until an equilibrium is reached. A steady temperature is maintained as the hot air particles continue their chaotic motion, constantly exchanging heat with the thermometer.

[A diagram shows air particles at different temperatures, with lower temperature particles as dots close together, and higher temperature particles as dots spread further apart, with arrows showing their increased motion and collisions. Another diagram shows the thermometer surrounded by lower temperature air particles on one side and higher temperature air particles on the other side, with arrows showing the heat transfer causing the thermometer to expand.]

The increase in air temperature, represented by the rising thermometer, occurs due to the gain in thermal energy of the air particles which then spread apart, expand the volume of the air, and transfer their heat and increased motion to the thermometer. A balance is eventually achieved as heat continues to flow between the air and the thermometer.

Although the evidence is weak, there has been concern in recent years over possible health effects from the magnetic fields generated by transmission lines.

A typical high-voltage transmission line is 20 m off the ground and carries a current of 200 A.

The concern stems from the fact that these transmission lines generate magnetic fields due to the flow of electric current.

Magnetic fields are a part of the electromagnetic spectrum, and prolonged exposure to high levels of magnetic fields may potentially have an impact on human health.

However, it is important to note that the evidence supporting this concern is currently weak and inconclusive.

To understand the potential risk, let's analyze the situation of a typical high-voltage transmission line. It is situated 20 meters above the ground and carries a current of 200 amperes.

As the current flows through the line, it generates a magnetic field that decreases in strength as the distance from the line increases.

At 20 meters or more away from the transmission line, the magnetic field strength is relatively low and generally considered safe.

In conclusion, while there have been concerns over the potential health effects of magnetic fields generated by transmission lines, the current evidence is weak,

and more research is needed to confirm any potential risks. As long as people maintain a safe distance from high-voltage transmission lines, the likelihood of experiencing negative health effects is low.

To know more about magnetic fields refer here

brainly.com/question/14848188#

#SPJ11

The mass gains GPE at a rate of approximately 0.39 W as it moves upwards.

To calculate the rate at which the mass gains gravitational potential energy (GPE) as it moves upwards, we need to determine the rate at which its vertical displacement changes with time. We can do this by calculating the slope of the displacement vs. time graph at any given point.

Looking at the graph, we can see that the displacement vs. time graph is a straight line with a positive slope, which means that the vertical displacement is increasing with time at a constant rate. The slope of the line represents the rate of change of displacement with time, which is equal to the velocity of the mass as it moves upwards.

To calculate the rate at which the mass gains GPE, we need to multiply its weight by its vertical velocity. The weight of the mass is given by:

w = mg

where m is the mass of the object and g is the acceleration due to gravity, which is approximately 9.81 m/s² near the Earth's surface.

The vertical velocity of the mass can be determined from the slope of the displacement vs. time graph. From the graph, we can see that the slope is equal to 0.20 m/s. Therefore, the vertical velocity of the mass is 0.20 m/s.

The rate at which the mass gains GPE is then given by:

P = w*v

where P is the power, w is the weight of the mass, and v is its vertical velocity. Substituting the values we have calculated, we get:

P = (0.20 kg)(9.81 m/s²)(0.20 m/s) = 0.39 W

As a result, as it goes upwards, the mass accumulates GPE at a rate of around 0.39 W.

To know more about the Displacement, here

https://brainly.com/question/30522975

#SPJ1

Every charge has an electric field and electric field lines from positive and negative charges interact with each other.

An electric field is a vector field that describes the effect of electric charges on other charges in the space around them. Every charge has an electric field associated with it, and the strength and direction of this field depend on the magnitude and location of the charge. Electric field lines are used to visualize the electric field and its direction.

Electric field lines from positive charges point outward, while those from negative charges point inward. The electric field lines from positive and negative charges interact with each other, causing them to curve and intersect in complex ways. Electric field lines do not interact with each other directly, but their behavior is influenced by the electric charges that create them.

To know more about the electric field visit:

https://brainly.com/question/30880362

#SPJ11

In a resonating pipe that is open at both ends, there are certain frequencies or wavelengths of sound waves that will produce a standing wave pattern. This is because the open ends of the pipe allow for the sound waves to reflect back and forth, creating constructive interference at certain points and destructive interference at others.

The fundamental frequency or first harmonic is the longest wavelength that can fit within the length of the pipe, and subsequent harmonics are integer multiples of the fundamental frequency. The resonating pipe can be used in musical instruments such as flutes or organ pipes, where the length and diameter of the pipe are carefully designed to produce specific pitches or notes.

In a resonating pipe that is open at both ends, there are several important terms and concepts to understand:

1. Resonance: Resonance occurs when a pipe is excited at its natural frequency, causing it to vibrate at maximum amplitude.

2. Fundamental frequency: The lowest frequency at which resonance occurs in a pipe. It depends on the length of the pipe and the speed of sound in the medium.

To find the fundamental frequency for a pipe open at both ends, you can use the formula:

Fundamental frequency (f) = (v / 2L)

where v is the speed of sound in the medium (typically 340 m/s in air at room temperature), and L is the length of the pipe.

3. Harmonics: Harmonics are whole-number multiples of the fundamental frequency. In a pipe open at both ends, all harmonics (both odd and even) are present.

4. Wavelength: The distance between two consecutive points in the same phase of the sound wave. For a pipe open at both ends, the relationship between the wavelength (λ) and the length of the pipe (L) is:

λ = 2L / n

where n is the harmonic number (1, 2, 3, ...).

By understanding these concepts, you can analyze and predict the behavior of a resonating pipe that is open at both ends.

To know more about frequencies visit:

https://brainly.com/question/5102661

#SPJ11

The net-force on the object is 20N when 10N force and a 30N force act in opposite directions.

When two forces act on an object in opposite directions, they are said to be in opposition or in opposite directions. In this case, a 10N force and a 30N force act in opposite directions. The net force is the vector sum of these two forces. If the forces are in opposite directions, the net force is the difference between the magnitudes of the two forces, and it acts in the direction of the larger force. In this case, the magnitude of the larger force is 30N, and the magnitude of the smaller force is 10N. Therefore, the net force is 30N - 10N = 20N, acting in the direction of the 30N force. This means that there is a net force of 20N acting on the object. It is important to note that the direction of the net force is not determined by simply adding the directions of the individual forces. Instead, it is determined by the relative magnitudes and directions of the forces. In this case, the larger force determines the direction of the net force.

To learn more about net-force, click here:
https://brainly.com/question/18109210

#SPJ11

Answer:

0.35 A

Explanation:

Faraday's law states that an induced emf is proportional to: the rate of change of the magnetic flux.

Induced emf is a phenomenon in which an electromotive force (emf) is produced in a conductor by a changing magnetic field. This happens when the conductor is either moving through a magnetic field or when the magnetic field around the conductor changes. The induced emf can be used to generate an electric current, as electric energy is required to maintain the current. The magnitude of the induced emf depends on the speed at which the conductor is moving through the magnetic field, the strength of the magnetic field, and the length of the conductor. It is also important to note that the direction of the induced emf is determined by Faraday's law of induction. This law states that the induced emf will flow in the opposite direction of the changing magnetic field.

To learn more about induced emf

https://brainly.com/question/13744192

#SPJ4

The object has an overall positive charge, since it has 3.62 x 1012 more protons than electrons.

Electrons are subatomic particles with a negative electric charge. They are found in all atoms and are responsible for chemical bonding between atoms and molecules. Electrons have a very small mass in comparison to protons and neutrons, which make up the nucleus of an atom. Electrons are found in various energy levels around the nucleus, and each of these energy levels can contain a certain number of electrons. Electrons can also move from one energy level to another, which is what happens when an atom absorbs or emits light. Electrons are essential for life, as they give atoms the ability to form molecules, which are the building blocks of life.

This means that it has a net charge of 3.62 x 1012 protons, or 3.62 x 1012 units of positive charge. This type of charge is known as static electricity, since it is a type of electric charge that accumulates and remains on an object until it is neutralized.

To learn more about electrons

https://brainly.com/question/9317875

#SPJ4

True. In Young's double-slit experiment, bright fringes will appear when the path difference between the two beams of light equals an integer number of half-wavelengths.

Wavelengths are the distance between two consecutive identical points on a wave. They are typically measured in meters and are a key concept in many areas of physics, including optics, sound, and radio waves. Wavelengths are inversely proportional to the frequency of a wave, meaning that as the frequency increases, the wavelength decreases. Wavelengths are also used to measure the energy of a wave and are related to the speed of the wave, which is typically the speed of light or sound. Wavelengths can be used to identify different types of waves, such as light, radio, and sound waves, as each wave has a unique wavelength. Wavelengths are also used in spectroscopy, which is the analysis of light to determine the chemical makeup of a material.

This is because when the two beams recombine, constructive interference occurs, which results in a bright fringe. Conversely, when the path difference does not equal an integer number of half-wavelengths, destructive interference occurs and a dark fringe is produced.

To learn more about wavelengths
https://brainly.com/question/16051869
#SPJ4

A hard and smooth object reflects better than a soft surface due to the way that light interacts with the object's surface. When light hits a surface, it can be either absorbed or reflected.

In the case of a hard and smooth surface, such as a mirror or a metal surface, the surface is able to reflect light back in a more direct and focused manner. This is because the surface is able to create a more even surface for the light to bounce off of, allowing it to reflect back with less distortion.

On the other hand, a soft surface, such as a piece of cloth or a sponge, is less able to reflect light back in a direct and focused manner due to its uneven surface. The fibers or pores on the surface of the material scatter the light in many different directions, resulting in a less reflective surface.

Overall, the smoothness and hardness of an object's surface play a significant role in determining how well it can reflect light.

To know more about please visit...

brainly.com/question/28727729

#SPJ11

Baby Yoda's mass on Mercury is 5.98 kg. His weight on Earth is 11.18 kg. His apparent weight in the elevator is 47.38 N.

To find Baby Yoda's mass on Mercury, we can use the formula:

Rearranging the formula to solve for mass, we get:

Plugging in the given values, we get:

To find Baby Yoda's weight on Earth, we can use the formula:

where the gravitational force strength on Earth is 9.81 m/s².

Plugging in the mass of 5.98 kg, we get:

To find Baby Yoda's apparent weight in the elevator, we need to draw a free body diagram (FBD) and use Newton's second law:

The weight is the gravitational force strength on Mercury, which we already know to be 53.85N. The apparent weight is the force that Baby Yoda feels in the elevator. The mass is still 5.98 kg, and the acceleration is -1.25 m/s² (negative because the elevator is accelerating downwards).

Plugging in the values, we get:

Simplifying, we get:

Therefore, Baby Yoda's apparent weight in the elevator is 47.38 N.

To learn more about gravitational force, here

https://brainly.com/question/12528243

#SPJ4

To solve this problem, we can use the formula: frequency of string = (frequency of tuning fork 1 + frequency of tuning fork 2) / 2

To find the vibrational frequency of the guitar string, we will use the given information about beats per second (bps) with 250 Hz and 255 Hz tuning forks.

1. First, let's consider the 4 bps with the 250 Hz tuning fork. The difference in frequencies between the string and the 250 Hz tuning fork should equal 4 Hz (since 4 beats are produced per second). This means the string's frequency can be either 250 + 4 = 254 Hz or 250 - 4 = 246 Hz.

2. Now, let's consider the 9 bps with the 255 Hz tuning fork. The difference in frequencies between the string and the 255 Hz tuning fork should equal 9 Hz (since 9 beats are produced per second). This means the string's frequency can be either 255 + 9 = 264 Hz or 255 - 9 = 246 Hz.

3. Comparing the possible frequencies from steps 1 and 2, we can see that the only frequency that is common in both cases is 246 Hz.

So, the vibrational frequency of the guitar string is 246 Hz.

To know more about Frequency visit:

https://brainly.com/question/5102661

#SPJ11

The time required for one complete vibration of a simple pendulum is affected by various factors, including the length of the pendulum and the gravitational acceleration. However, the mass of the pendulum does not affect the time required for one complete vibration. Therefore, if the mass of a simple pendulum is tripled, the time required for one complete vibration remains the same. This is because the period of a pendulum depends solely on the length of the pendulum and the gravitational acceleration, as derived from the formula T = 2π√(l/g), where T is the period, l is the length of the pendulum, and g is the gravitational acceleration. Therefore, increasing the mass of the pendulum does not affect its period.
Hi! When the mass of a simple pendulum is tripled, the time required for one complete vibration remains the same. The time period of a simple pendulum is given by the formula T = 2π√(L/g), where T is the time period, L is the length of the pendulum, and g is the acceleration due to gravity. As you can see, the mass of the pendulum does not appear in this formula, so changing the mass does not affect the time required for one complete vibration.

To know more about simple pendulum visit:

brainly.com/question/29183311

#SPJ11

When a gas expands adiabatically, its internal energy decreases and work is done on the gas.

Adiabatic expansion occurs when a gas expands without any heat exchange with the surroundings.

As a result, the internal energy of the gas decreases because the gas does work on the surroundings.

This means that option A is correct, and the internal (thermal) energy of the gas decreases.

Option B is incorrect since the gas is doing work on the surroundings and therefore loses internal energy.

Option C is incorrect because work is done on the gas by the surroundings.

Option D is correct since work is done on the gas.

Finally, option E is incorrect because the temperature of the gas decreases as its internal energy decreases due to the expansion.

For more such questions on energy , click on:

https://brainly.com/question/13881533

#SPJ11

According to the question the transverse waves on the string is 1014 m/s.

Speed is the rate of motion or action, usually measured in terms of distance traveled over time. It can be expressed as a scalar quantity, representing the magnitude of the velocity (the rate of change of position); or as a vector quantity, representing the direction and magnitude of the motion. In physics, speed is a fundamental concept and is commonly defined as the magnitude of the velocity of an object. The speed of an object is the magnitude of its velocity, which is the rate of change of its position relative to a frame of reference. The speed at which an object is moving is usually expressed as its distance traveled per unit of time.

Therefore, the wave speed is calculated by dividing the frequency (659 Hz) by the wavelength (0.65 m):
[tex]Wave Speed = 659 Hz / 0.65 m = 1014 m/s.[/tex]

To learn more about speed

https://brainly.com/question/3004254

#SPJ4

Answer:

When the poles of two magnets are brought either then they repel If it is unlike pole only

Or else they attract

To find the absolute value of the angular magnification of a telescope consisting of two lenses, with an objective lens having refractive power of 0.2169 diopters and an eyepiece with a focal length of 4.9 cm, follow these steps:

1. Convert the refractive power of the objective lens to focal length:

Focal length (objective) = 1 / Refractive power

  Focal length (objective) = 1 / 0.2169 d = 4.61 meters (or 461 cm)

2. Convert the focal length of the eyepiece to diopters:

  Refractive power (eyepiece) = 1 / Focal length

  Refractive power (eyepiece) = 1 / 4.9 cm = 0.2041 d

3. Calculate the angular magnification using the formula:

  Angular magnification = Focal length (objective) / Focal length (eyepiece)

  Angular magnification = 461 cm / 4.9 cm = 94.08

4. Find the absolute value of the angular magnification:

  |Angular magnification| = |94.08| = 94.08

Thus, the absolute value of the angular magnification of this telescope is 94.08.

To know more about angular magnification refer here

https://brainly.com/question/31393439#

#SPJ11

According to the question the magnitude of force f is 2N.

Magnitude is a quantitative measure of the size or intensity of something. It is a numerical value used to describe the size, strength, or intensity of a physical quantity or phenomenon. Magnitude can be used to describe a wide range of physical phenomena, such as the size of earthquakes, the brightness of stars, the intensity of light, the speed of sound, the energy of explosions, the force of gravity, and the mass of an object.

The force of 4N on the 3 kg block is equal to the force of 2N acting on the 7 kg block and the 3 kg block,
plus the force of f acting on the 7 kg block. Since the forces acting on the 7 kg and 3 kg blocks are equal and opposite,
the net force on the 7 kg block is 4N - 2N = 2N.
Therefore, the magnitude of force f is 2N.

To learn more about magnitude
https://brainly.com/question/30337362
#SPJ4

Animals need oxygen gas ([tex]O_{2}[/tex]) to carry out life processes such as respiration.

Oxygen is required by cells to produce energy through the process of cellular respiration. During respiration, oxygen is used to break down glucose molecules into carbon dioxide, water, and energy in the form of ATP (adenosine triphosphate).

The ATP is then used by cells to power various life processes such as movement, growth, and reproduction. Without oxygen, cells cannot produce energy and the animal would not be able to survive.

To know more about oxygen gas here

https://brainly.com/question/31078820

#SPJ4

When a permanent magnet is exposed to an extremely strong magnetic field in the wrong orientation, the magnetization of the magnet can be permanently reversed.

Inside a permanent magnet, there are many small regions called magnetic domains. Each domain is made up of atoms with magnetic dipole moments that are aligned in the same direction. In a magnetized material, the magnetic domains are aligned with each other to produce a net magnetic field. When the magnet is exposed to a strong magnetic field in the wrong orientation, the external field can overpower the alignment of the magnetic domains within the magnet. The external magnetic field can force some of the domains to realign in the opposite direction, causing the overall magnetization of the magnet to be reversed.

To know more about magnetic visit :

https://brainly.com/question/2841288

#SPJ11

A student is measuring the lengths of caterpillars for an experiment. She measures 100 caterpillars using a ruler that measures to the nearest centimeter, a change that could help improve the results of her experience D. Her measurements will be more accurate if she measures an additional 100 caterpillars is correct option.

Reduce measurement errors, the learner can reduce measurement errors by making sure the caterpillars are measured at the same spot each time and that the ruler is properly positioned. The student could follow the following steps to enhance the experiment's outcomes:

Increase the sample size: While measuring 100 caterpillars is a good start, doing so will help to ensure that the results are accurate. The data will be more representative the larger the sample size.

Use a more accurate measuring device: Measuring the length of the caterpillars with a ruler that measures to the nearest centimetre might not be accurate enough. More accurate measurements could be made by using a ruler that measures to the nearest millimeter.

Measure each caterpillar several times: Taking an average of the measurements can assist to lessen the impact of measurement mistakes and improve the accuracy of the results.

Therefore, the correct option is (D).

The complete question is,

A student is measuring the lengths of caterpillars for an experiment. She

measures 100 caterpillars using a ruler that measures to the nearest

centimeter. Which statement describes a change that could help improve the results in her experiment?

A. Her measurements will be more precise if she measures an

additional 100 caterpillars.

B. Her measurements will be more precise if she uses a ruler that

measures to the nearest millimeter.

C. Her measurements will be more accurate if she uses a ruler that

measures to the nearest millimeter.

D. Her measurements will be more accurate if she measures an

additional 100 caterpillars

To know more about measurement

https://brainly.com/question/17494291

#SPJ1

The rate at which the internal (thermal) energy of the gas changing is 13 W.

If the gas is doing work at a rate of 13 W, this means that its internal energy is decreasing at a rate of 13 W as well, according to the first law of thermodynamics which states that energy cannot be created or destroyed, only transferred or converted from one form to another. Since the container is perfectly insulated, there is no heat transfer involved, and therefore the change in internal energy of the gas is solely due to the work being done.

To learn more about work, click here:
https://brainly.com/question/31050706

#SPJ11