How many grams of 02 are needed to react with 7.50g of ethanol

Answer:

Enzyme is carbonic anhydrase

Substrate is [tex]CO_2[/tex]

Turnover number is [tex]10^{7}[/tex]

Explanation:

An enzyme is used by a living organism as a catalyst to perform a specific biochemical reaction.

A substrate is a molecule upon which an enzyme acts.

Turnover number refers to the number of substrate molecules transformed by a single enzyme molecule per minute. Here, the enzyme is the rate-limiting factor.

Here,

Enzyme is carbonic anhydrase

Substrate is [tex]CO_2[/tex]

Turnover number is [tex]10^{7}[/tex]

The correct answer is C. Bohr's model

Explanation:

Bohr's model of the atom developed in 1913 proposed each atom contained a nucleus with protons and neutrons. Also, there were electrons that orbited the nucleus. About this, Niels Bohr proposed the orbits of electrons were similar to those of planets around the sun; however, these did not occur due to gravity but to attraction forces. This model integrated new accurate ideas about the atom. However, this model was still inaccurate because particles in an atom are electrically charged and electrons do not orbit in fixed stable orbits and cannot be compared to the movement of planets around a star.  

Answer:

Bohr's model

Explanation:

Answer:

THE STANDARD HEAT OF NEUTRALIZATION OF THE BASE SODIUM HYDROXIDE BY THE ACID HYDROGEN TRIOXONITRATE V ACID IS -56 kJ / mol.

Explanation:

Volume of 0.3 M NaOh = 100 mL

Volume of 0.3 M HNO3 = 100 mL

Initail temp of NaOH and HNO3 = 35 °C = 35 + 273 K = 308 K

Final temp. of mixture = 37 °C = 37 + 273 K = 310 K

We can make the following assumptions form the question given:

1. specific heat of the reaction mixture is the same as the specific heat of water = 4.2 J/g K

2. the toal mass of the reaction mixture is 200 mL = 200 g since no heat is lost to the calorimeter or surrounding.

3. initail temperature of the reaction mixture is equal to the average temperature of the two reactant solutions

= ( 308 + 308 /2) = 308 K

4. Rise in temeperature for the reaction = 310 -308 K = 2 K

Then the total heat evolved during the reaction = mass * specifc heat capacity * temperature  change

Heat = 200 g * 4.2 J/g K * 2 K

Heat = 1680 J

EQUATION FOR THE REACTION

HNO3 + NaOH -------> NaNO3 + H20

From the equation, 1 mole of HNO3 reacts with 1 mole of NaOH to prouce  mole of water.

100 mL of 0.5 M HNO3 contains 100 * 0.3 /1000 = 0.03 mole of acid

This result is same for the base NaOH = 0.03 mole of base

So therefore,

0.03 mole of acid will react with 0.03 mole of base to produce 0.03 mole of water to evolved 1680 J of heat energy.

The production of 1 mole of water will evolve 1680 / 0.03 J of heat

= 56 000 J or 56 kJ of heat energy per mole of water.

So therefore, 1the standard heat of neutralization of sodium hydroxide by trioxoxnitrate V acid is -56 kJ/mol.

Answer:

(1). Mole fraction = 0.152 for sulfur tetrafluoride gas.

Mole fraction = 0.848 For dinitrogen monoxide gas.

(2). Partial Pressure for dinitrogen monoxide gas = 187 kPa

Partial Pressure for sulfur tetrafluoride gas = 33.4 kpa.

(3). Total Partial Pressure = 220.4 kpa.

Explanation:

So, we are given the following data or parameters or information in the question above;

• Volume of the tank = 5.00L per tank;

• Temperature of the tank = 7.03°C;

• The mass of the content in the tank =

17.7g of dinitrogen monoxide gas and

7.77g of sulfur tetrafluoride gas.

So, we will be making use of the formulae below to calculate the MOLE FRACTION:

Moles, n= mass/molar mass and mole fraction = n(1)/ n(1) + n(2) per each constituents.

Moles, n1 = 17.7g of dinitrogen monoxide gas/ 44 grams per mole. =0.4023 moles.

Moles, n2 = 7.77g of sulfur tetrafluoride gas/ 108.1 grams per mole. = 0.07188 moles.

Total numbers of moles = n1 + n2 = 0.47415 moles

Mole fraction =0.4023 / 0.47415 = 0.848 of dinitrogen monoxide gas.

Mole fraction = 0.07188/0.47415 = 0.152 of sulfur tetrafluoride gas.

PART TWO: CALCULATE THE PARTIAL PRESSURE AND TOTAL PRESSURE BY USING THE FORMULA BELOW;

pressure × volume = number of moles × gas constant, R × temperature.

Pressure = n × R × T/ V.

For dinitrogen monoxide gas. ;

Partial Pressure = 0.4023 × 8.314 × 280.03 / 5 × 10^-3 = 187 kPa.

For sulfur tetrafluoride gas

Partial Pressure = 0.07188 × 8.314 ( × 280.03 / 5 × 10^-3. = 33.4 kpa.

(3). Total pressure = (187 + 33.4)kpa = 220.4 kpa

Answer:

THE VOLUME OF NaOH NEEDED TO BE ADDED TO CITRIC ACID TO REACH THE EQUIVALENT POINT IS 4.725 L

Explanation:

The titration is between citric acid (H3C6H507) and NaOH

mass of citric acid = 0.306 g

Volume of citric acid = 250 mL = 250 /1000 = 0.25 L

Concentration of NaOH = 0.1000 M

Volume = unknown

First calculate the molar mass of citric acid

( 1 * 3 + 12* 6 + 1*5 + 16*7) = (4 + 72 + 5 + 112) = 193 g/mol

Since,

Concentration in moles/dm3 = concentration in g/dm3 / RMM

So the molarity of citric acid is:

Molarity = 0.306g / 0.25dm3  / Rmm

Molarity = 1.224g/dm3 / 193 g/mol

Molarity = 0.0063 M

Equation for the reaction is:

C3H5O(COOH)3 + 3NaOH → Na3C3H5O(COO)3 + 3H2O

Using the formula:

CaVa / CbVb = na/ nb

Ca = 0.0063 M

Cb = 0.1000 M

Va = 0.25 L

Vb = unknown

na = 1

nb = 3

Vb = Ca Va nb/ Cb na

Vb = 0.0063 * 0.25 * 3 / 0.1000 * 1

Vb = 0.4725 / 0.1000

Vb = 4.725 L

The volume of NaOH needed to reach the equivalent point is therefore 4.725 L

Answer:

b :)

Explanation:

an exothermic reaction is when heat/light is produced. heart is produced from this reaction so it is exothermic

The correct answer is option c. The reaction between salt and water is endothermic.

Chemical reaction

Salt is a hygroscopic material that attracts water and heat from its surroundings. This is why leather shoes are "dry" and wrinkled when covered with salt. This type of reaction is known as an endothermic reaction, which is a chemical reaction that absorbs heat.

Endothermic reaction: A chemical reaction that absorbs heat is called an endothermic reaction. The temperature will drop. For example, (i) heating nitrogen and oxygen together to a temperature of about 3000 ° C produces nitrogen oxide gas. N2 + O2 + heat → 2NO (g)

Learn more about Endothermic Reaction here: https://brainly.com/question/6506846

#SPJ2

Answer:

in short weight

Explanation:

weight is mass x gravitational pull on an object

Answer:

Oxygen is the limiting reactant.

Explanation:

Based on the reaction:

C₁₂H₂₂O₁₁ + 12O₂ → 12CO₂ + 11H₂O

1 mole of sucrose reacts with 12 moles of oxygen to produce 12 moles of CO₂ and 11 moles of H₂O.

10.0g of sucrose (Molar mass: 342.3g /mol) are:

10.0g C₁₂H₂₂O₁₁ × (1mole / 342.3g) = 0.0292 moles of C₁₂H₂₂O₁₁

And moles of 10.0g of oxygen (Molar mass: 32g/mol) are:

10.0g O₂ × (1mole / 32g) = 0.3125 moles of O₂

For a complete reaction of 0.0292 moles of C₁₂H₂₂O₁₁ you need (knowing 12 moles of oxygen react per mole of sucrose):

0.0292 moles of C₁₂H₂₂O₁₁ × (12 moles O₂ / 1 mole C₁₂H₂₂O₁₁) = 0.3504 moles of O₂

As you have just 0.3125 moles of O₂, oxygen is the limiting reactant.

Answer:

The solubility is  [tex]S = 0.0014 \ g[/tex]

Explanation:

From the question we are told that

   The volume of the solution is  [tex]V = 600 mL[/tex]

    The initial temperature is  [tex]T_i = 37 ^oC[/tex]

     The final temperature is [tex]T_f = 21^oC[/tex]

      The additional precipitate is [tex]m = 0.084 \ kg = 84 \ g[/tex]

Yes because the solubility of the substance X is the amount of X needed to saturate a unit volume of the solvent  (for solubility of a solute to be calculated the solute must be able to saturate the solvent)

now we see that the substance X saturated the solvent because a precipitate was formed which the student threw away

   The solubility at  21 ° C is mathematically represented as

            [tex]S = \frac{m}{m_w * 100 g \ of water }[/tex]

Mass of water([tex]m_w[/tex]) in the solution is mathematically represented as

       [tex]m_w = V * \rho_w[/tex]

Where  [tex]\rho = 1 \frac{g}{mL}[/tex]

So  

      [tex]m_w =600 * 1[/tex]

       [tex]m_w =600g[/tex]

So  

    [tex]S = \frac{84}{600 * 100 g \ of water }[/tex]

    [tex]S = 0.0014 \ g[/tex]

Answer:

Numbers 4,3

Explanation:

Ionic bond is between nonmental and metals

Answer:

c

Explanation:

Answer:

0.287 mole of PCl5.

Explanation:

We'll begin by calculating the number of mole in 51g of Cl2. This is illustrated below:

Molar mass of Cl2 = 2 x 35.5 = 71g/mol

Mass of Cl2 = 51g

Number of mole of Cl2 =..?

Mole = Mass /Molar Mass

Number of mole of Cl2 = 51/71 = 0.718 mole

Next, we shall write the balanced equation for the reaction. This is given below:

P4 + 10Cl2 → 4PCl5

Finally, we determine the number of mole of PCl5 produced from the reaction as follow:

From the balanced equation above,

10 moles of Cl2 reacted to produce 4 moles of PCl5.

Therefore, 0.718 mole of Cl2 will react to produce = (0.718 x 4)/10 = 0.287 mole of PCl5.

Therefore, 0.287 mole of PCl5 is produced from the reaction.

Answer: 25%

Explanation:  

1. Transmittance, T= P/P0  

Where P = light exiting the cell

           P0 = light entering the cell

Therefore %T =  P/P0 ×100

           = 50/200×100

=25%

2. Absorbance, A= -log(T)

But T= 0.25

Therefore A= -log(0.25)

                  = 0.6020

Answer:

C

Explanation:

This is the definition of an isomer.

Answer:

Plasmas and solids are both made up of cation-anion pairs. Solids and plasmas are both made up of electrons and cations. Solids are made up of cation-anion pairs, but plasmas are not.

Answer:

Solids are made up of cation-anion pairs, but plasmas are not.

Explanation:

Answer:

$0.0238

Explanation:

The energy you need to increase the temperature of water from 20°C to 100°C is obtained from:

Q = C×m×ΔT

Where Q is the energy, C is specific heat of water (4.184J/g°C), m is mass of water (2.00x10²g - Density of water 1g/mL), ΔT is change in temperature (100.0°C - 20.0°C)

Replacing:

Q = 4.184J/g°C × 2.00x10²g × 80.0°C

Q = 66944J = 66.944kJ

As you are assuming the energy of combustion will be just 50.0% to heat the water the energy you need is 66.944kJ × 2 = 133.888kJ

The combustion of methane is:

CH4(g) + 2O2(g) ⟶ CO2(g) + 2H2O(l) ΔH = −890.8kJ

That means 1 mole of methane produce 890.8kJ. As you need 133.888kJ, moles of methane are:

133.888kJ × (1 mol CH₄ / 890.8kJ) = 0.150 moles of CH₄.

Using PV = nRT, moles of 15.0ft³ (424.8L) at 20.0°C (293.15K) and 1.00atm:

1.00atmₓ424.8L = moles CH₄ₓ0.082atmL/molKₓ293.15K

17.67 = moles CH₄

As 17.67 moles of CH₄ cost $2.80, the cost of 0.150 moles of CH₄ is:

0.150 moles CH₄ ₓ ($2.80 / 17.67 moles) =

Answer:

[tex]2.11\ * 10^{-2}[/tex]  is the correct answer to the given question.

Explanation:

Given k=6.40 x 10-3 min-1.

According to the first order reaction .

The concentration of time can be written as

[tex][\ A\ ]\ = \ [\ A_{0}\ ] * e \ ^\ {-kt}[/tex]

Here [tex][\ A\ ]_{0}[/tex] = Initial concentration.

So  [tex][\ A\ ]_{0}= 0.0314 M[/tex]

Putting this value into the above equation.

[tex]0.0314 \ *\ e^{6.40 x 10^{-3} \ * \ 62.0 }[/tex]

=0.211 M

This can be written as

[tex]=\ 2.11 *\ 10^{-2}[/tex]

Answer:

1.The electrode on the right is positive

2. 0.058V

Explanation:

The above cell is a concentration cell.

A concentration cell is an electrolytic cell that is made of two half-cells with the same electrodes, but differs in concentrations of the solutions. A concentration cell functions by diluting the more concentrated solution and concentrating the more dilute solution, creating a voltage as the cell reaches an equilibrium thereby transferring the electrons from the cell with the lower concentration to the cell with the higher concentration.

In the above cell, electrons flow from the left electrode (less concentrated) to the right electrode (more concentrated). Therefore, the right electrode is the positive electrode (cathode).

Part 2: Please, see the attachment below for the calculations.

Answer:

c

Explanation:

chemicals can be found in every part of our lives

Answer:

Glucose: (a) moves into sac

Water: (b) moves out of sac

Albumin: (c) does not move

NaCl: (a) moves into sac

Explanation:

A semi-permeable membrane is a membrane that allow certain molecules or ions to pass through by diffusion.

Diffusion is the movement of molecules from a region of higher concentration to a region of lower concentration until equilibrium is attained. A special form of diffusion known as osmosis transports water molecules across a semi-permeable membrane.

Osmosis is the movement of water molecules from a region lower solute concentration (high water molecules concentration) to a region of higher solute concentration (low water molecules concentration) until equilibrium is attained.

From the above definitions and the given data;

Glucose concentration is higher in solution outside the sac, thus, glucose molecules will move into the sac.

Water molecules are higher in the sac as a result of the lower concentration of solutes, therefore, water molecules will move out of the sac into the solution outside.

Since the sac is impermeable to albumin, it does not move.

NaCl concentration is lower in the sac, therefore, it will move ro  the solution outside into the sac.

Glucose will move into the sac, water will move out of the sac, albumin will neither move in nor out, and NaCl will move into the sac.

Thus, both glucose and NaCl molecules will diffuse from the solution into the sac, and water molecules will move from the sac into the surrounding solution. Since the sac is not permeable to albumin, then the movement in or out is inhibited.  

More on osmosis and diffusion can be found here: https://brainly.com/question/19867503?referrer=searchResults

The given question is incomplete. The image present in the question for Reaction A is attached below along with the answer.

Explanation:

Pyruvate molecule reacts with Coenzyme A in the presence of oxygen and it results in the formation of acetyl Coenzyme A and carbon dioxide.

The enzyme pyruvae dehydrogenase helps in catalyzing this reaction. As in this biochemical reaction [tex]NAD^{+}[/tex] gets converted into NADH.

This reaction is shown in the image attached below.  

Answer:

CaSO4

Explanation:

Calcium sulfate (or calcium sulphate) is the inorganic compound with the formula CaSO4 and related hydrates.

Answer: (e) The pressure in the container increases but does not double.

Explanation:

To solve this, we need to first remember our gas law, Boyle's law states that the pressure and volume of a gas have an inverse relationship. That is, If volume increases, then pressure decreases and vice versa, when temperature is held constant. Therefore, increasing the volume in this case does not double the pressure owning to out gas law, but an increase in pressure would be noticed if temperature is constant

The pressure in the container increases but does not double.

At constant temperature and volume, the pressure of a given mass of gas is directly proportional to the number of moles of gas present.

Number of moles of He = 10 g/4 g/mol = 2.5 moles

Number of moles of Ne = 10 g/20 g/mol  = 0.5 moles

We can see that the number of moles only increases by 1/5 of its initial value therefore, the pressure in the container increases but does not double.

Learn more: https://brainly.com/question/8646601

Answer:

Explanation:

The objective here is mainly drawing the diagrams of every stereoisomer for 1-bromo-2-chloro-1,2-difluorocyclopentane.

Stereoisomerism is the difference of the spatial arrangement of atoms in a molecule or a compound with the same molecular formula.

For 1-bromo-2-chloro-1,2-difluorocyclopentane.

We have the stereoisomers as follows:

(1R,2S)-1-bromo-2-chloro-1,2-difluorocyclopentane.

(1S,2R)-1-bromo-2-chloro-1,2-difluorocyclopentane.

(1S,1S)-1-bromo-2-chloro-1,2-difluorocyclopentane.

(1R,1R)-1-bromo-2-chloro-1,2-difluorocyclopentane.

Their diagrams are drawn and shown in the attached file below in the order with which they are listed above.

The correct answer is B. An observation

Explanation:

An observation is defined as a statement or conclusion you made after observing or measuring a phenomenon, this includes statements based on precise instruments. For example, if you conclude a plant grows 2 inches every month by measuring the plant during this time, this is classified as an observation. The conclusion of the student is also an observation because he concludes this after analyzing the volume of the water in the cylinder through the lines in the graduated cylinder, considering the water is just in the middle of 100 mL and 200 mL which indicates there are 150 mL of water.

Answer:

B. An observation

Explanation:

Hello,

Given the illustration, such statements is considered as an observation, since it came up from something the student realized with his/her own eyes, as in the volumetric cylinder the level of the liquid reached 150 mL of water. Predictions are not observed but assumed, theories are stated when experimentation is already deeply studied and hypothesis are assumptions before experimenting.

Regards.

Answer:

Due to its location, Portland has a moderate climate. Also, which portland are you talking about? Portland Oregon or Portland Maine. Portland Oregon has a much more rainy climate, so I would say Maine has a better climate.

Explanation:

Answer:

0.053moles

Explanation:

Hello,

To calculate the number of moles of gas remaining in his after he exhale, we'll have to use Avogadro's law which states that the volume of a given mass of gas is directly proportional to its number of moles provided that temperature and pressure are kept constant. Mathematically,

V = kN, k = V / N

V1 / N1 = V2 / N2= V3 / N3 = Vx / Nx

V1 = 1.7L

N1 = 0.070mol

V2 = 1.3L

N2 = ?

From the above equation,

V1 / N1 = V2 / N2

Make N2 the subject of formula

N2 = (N1 × V2) / V1

N2 = (0.07 × 1.3) / 1.7

N2 = 0.053mol

The number of moles of gas in his lungs when he exhale is 0.053 moles

Answer:

CONVERT IT:

50°F is equal to 10°C

Answer:

10 degrees Celsius

Explanation:

(50°F − 32) × 5/9 = 10°C

Answer:

The correct answer will be "-6.7 × 10¹⁰ kg.m/s".

Explanation:

The required conversions are:

⇒  [tex]1 \ kg=1000 \ g[/tex]

⇒  [tex]1 \ m=100 \ cm[/tex]

Now,

The complete conversion will be:

=  [tex][-6.7\times 10^5 \ \frac{kg \ m}{s} ]\times [\frac{10^3 \ g}{kg}\times \frac{10^2 \ cm}{1 \ m}][/tex]

On cancelling the terms, we get

=  [tex]-6.7\times 10^{10} \frac{kg \ m}{s}[/tex]

So that the missing terms will be [tex][\frac{10^3 \ g}{kg}\times \frac{10^2 \ cm}{1 \ m}][/tex] and [tex][-6.7\times 10^{10}\frac{kg \ m}{s}][/tex]

You need to know the amount of heat generated by the combustion reaction.

Assuming propane as fuel, you can use thiis data:

C3H8(g)+5O2(g)---3CO2(g)+4H2O(g) ΔH= -2217 KJ

So when 3 moles of CO2 is emmitted 2217 kJ of heat is produced.

The molar wegiht of CO2 is 12 g/mol + 2 * 16 g/mol = 44 g/mol.

Then 3 mol * 44 g / mol = 132 g of CO2 are produced with 2217 kJ of heat.

Now you have to calculate how much energy you need to produce if only 12% is abosrbed by the pork

Energy absorbed by the pork = 12% *  total energy =>

total energy = energy absorbed by the pork / 0.12 = 1700 kJ / 0.12 = 14,166.67 kJ.

Now, state the proportion:

132 g CO2 / 2217 kJ = x / 14,166.7 kJ =>

x = 14,166.67 * 132 / 2217 = 843.48 g CO2.

Answer: 843 g of CO2