How solve stiochiometry problem easily​

The responses that can form hydrogen bonds with water molecules are

II. CH₃COOH and IV. CH₃NH₂.

Acetic or ethanoic acid (CH₃COOH) has hydrogen atom bonded to an oxygen atom, so it can form hydrogen bonds with water molecules (see the picture below).

Methylamine (CH₃NH₂) has hydrogen atom bonded to a nitrogen atom, so it can form hydrogen bonds with water molecules.

Hydrogen bond is an electrostatic attraction between two polar groups that occurs when a hydrogen atom (H), covalently bound to a highly electronegative atom such as flourine (F), oxygen (O) and nitrogen (N) atoms.

Sodium (Na) and ethane can not form hydrogen bonds, because they do not have a hydrogen atom bonded to flourine (F), oxygen (O) and nitrogen (N) atoms.

More about hydrogen bond: brainly.com/question/11679211

#SPJ4

7.8×10⁻² moles of water were in the sample of the salt

m(NiCl₂·6H₂O) = 3.5 g; mass of a hydrous salt

m(NiCl₂) = 2.1 g; mass of an anhydrous salt

m(H₂O) = m(NiCl₂·6H₂O) - m(NiCl₂)

m(H₂O) = 3.5 g - 2.1 g

m(H₂O) = 1.4 g; mass of water

M(H₂O) = 18 g/mol; the molar mass of water

n(H₂O) = m(H₂O) ÷ M(H₂O)

n(H₂O) = 1.4 g ÷ 18 g/mol

n(H₂O) = 0.078 mol; amount of water in the sample

The mole is an SI unit which measures the number of particles in substance. One mole is equal to 6.022·10²³ atoms.

More about mole: brainly.com/question/15356425

#SPJ4

One sp3-hybridized carbon atom is present in the structure of cyclopentadiene.

Cyclopentadiene is an organic compound (diene) with the formula C₅H₆ (see the picture below).

In cyclopentadiene there is four carbon atoms with sp2 hybridized carbon and one carbon atom with sp3-hybridized carbon.

When carbon atom is sp2 hybridized, it has three sp2 orbitals and one p orbital. Carbon has four bonds in total (two single and one double bond)

In sp3 hybridization hybridize one s-orbital and three p-orbitals of carbon atom. Carbon atom with sp3 hybridization has four single bonds. In the picture below, that is an an atom on the top.

More about hybridization: brainly.com/question/22765530

#SPJ4

Answer:

This collision makes the electron in the cathode free. These electrons undergo collision with neutral atoms of the gas and ionize them to form ions. The positive ions thus produced move toward the oppositely charged cathode and electrons move towards the anode

A truck at the top of a hill has the highest gravitational potential energy. So, the correct option is (a).

The energy that an item has or acquires when its location changes as a result of being in a gravitational field is known as gravitational potential energy. Gravitational potential energy can be defined as an energy that has a connection to gravitational force or gravity.

According to classical mechanics, the work per unit mass required to move an object from a set reference site to a given location is equal to the gravitational potential at that location. With mass assuming the function of charge, it is comparable to the electric potential.

Therefore, a truck at the top of a hill has the highest gravitational potential energy.

The complete question is: Which of the following has the highest gravitational potential energy?

a) a truck at the top of a hill

b) a bike speeding down a hill

c) a dog at the top of a hill

Learn more about gravitational potential energy here:

https://brainly.com/question/3884855

#SPJ9

A chemical species' concentration in a solution, specifically the amount of a solute per unit volume of solution, is measured by its molar concentration.

The amount of a solute per unit volume of a solution, or the concentration of a chemical species in a solution, is expressed as a solute's molar concentration. The most used unit for expressing molarity in chemistry is the number of moles per litre, represented by the unit sign mol/L or mol/dm3 in SI units.

The molarity of a substance refers to how much of it is present in a given volume of solution (M). Molarity is the measure of how many moles of a solute are present per litre of a solution. Molarity is also referred to as a solution's molar concentration. Molarity is the measure of a solute's concentration in moles per litre in a solution (). Molality is the ratio of moles of solute to kilograms of solvent ().

with units of [tex]$\mathrm{mol} \cdot \mathrm{L}^{-1}$[/tex]..

For  molarity  we take the quotient moles of solute/ volume of solution

And so.... [tex]$\frac{\frac{3.46 \cdot g}{58.44 \cdot \mathrm{g} \cdot \mathrm{mol}^{-1}}}{50.0 \cdot m L \times 10^{-3} \cdot L \cdot m L^{-1}}= \cdot \mathrm{mol} \cdot L^{-1} \ldots$[/tex]

To learn more about molarity refer to:

https://brainly.com/question/17138838

#SPJ4

percentage of a radioactive sample that remains after four half-lives have passed is 6.25 %

As radioactive substances are first-order reactions and first-order reactions have a constant half-life and are represented by t1/2. t1/2 = 0.693 / λ

half-life is the time period for the sample to become half of its original concentration.

so for 1 st half-life, the substance will become 100 / 2 =50%

for 2 nd half-life, the substance will become 50 / 2 = 25%

for 3 rd half-life, the substance will become 25 / 2 = 12.5%

for 4 th half-life, the substance will become 12.5 / 2 = 6.25%

percentage of a radioactive sample that remains after four half-lives have passed is 6.25 %

For more information on half-life click on the link below:

https://brainly.com/question/2320811

#SPJ4

Within a water molecule, the electrons spend most of their time attracted more closely to Oxygen atom.

An electron is a negatively charged subatomic particle that can exist either free or bonded to an atom (not bound). An atom has three primary types of particles: protons, neutrons, and the electron, which is bound to it. Together, protons, neutrons, and electrons make up the atom's nucleus.

In nature, electrons can be found both bound inside of atoms and unbound (free electrons). The part of an atom that is negatively charged is caused by electrons. Electrons revolve around the atomic nucleus, which is positively charged, in an atom. In solids, electrons serve as the main conductor of current.

To learn more about electrons from the given link:

brainly.com/question/1255220

#SPJ4

The NaCl solution will have higher boiling point.

The temperature at which the vapour pressure equals the typical air pressure at sea level is known as the normal boiling point.

A molecular compound is [tex]C_{2} H_{6} O_{2}[/tex]. Meaning that it will continue to be in this state after dissolving:

[tex]C_{2} H_{6} O_{2}[/tex] ⇒ [tex]C_{6} H_{12} O_{6}[/tex] (aq)

Ionic materials include sodium chloride (NaCl). In other words, it will produce ions when it dissolves:

NaCl(s) ⇒ [tex]Na^{+}[/tex](aq) + [tex]Cl^{-}[/tex] (aq)

[tex]C_{2} H_{6} O_{2}[/tex] is a molecule and NaCl is an ionic substance. The boiling points of ionic compounds are higher than those of molecular molecules. NaCl will therefore have a higher boiling point.

Learn more about boiling point here:

https://brainly.com/question/2153588

#SPJ4

Volume of potassium hydroxide that can neutralise 25 cm³ of H2Z acid solution is 5cm³

The neutralization reaction is

H2Z + 2KOH → K2 H2Z + 2H2O

H2Z acid is diprotic acid as it has two ionizable hydrogens.

Thus, 1 mole of Z acid will neutralize 2 moles of KOH.

The number of moles of phosphorus acid present in 0.025 dm³ of 0.5 M aqueous solution is 0.1×

= 0.0025

They will neutralize 2×0.0025mol = 0.005 moles of KOH.

The molarity of KOH solution is 1.0 mol dm³

The volume of KOH solution required will be

1.0 × 0.005 = 0.005 dm³ = 5cm³

Hence, volume of KOH solution required will be 5 cm³.

learn more about neutralization reaction here:

https://brainly.in/question/15104847

#SPJ9

The minimum no of pins required by dual-op-amp is 8. Each op-amp has 2 input terminals(4 pins) and one output terminal(2 pins). Another 2 pins are required for power.

An operational amplifier is a high-gain, DC-coupled electronic voltage amplifier with differential input and typically single-ended output. An op amp in this setup generates an output potential (relative to circuit ground) that is typically 100,000 times greater than the potential difference between its input terminals. Operational amplifiers were first employed in analog computers to carry out mathematical operations in linear, non-linear, and frequency-dependent circuits.

The op amp's popularity as a component in analog circuits stems from its adaptability. By adopting negative feedback, the properties of an op-amp circuit, such as its gain, input and output impedance, bandwidth, etc., are defined by external components and have no influence on temperature coefficients or technical tolerance in the op amp itself.

To learn more about dual-op-amp from the given link:

https://brainly.com/question/16190769

#SPJ4

A liquid with a density of 0.890 g/ml has a volume of 18.2 ml. its mass in grams is:0.0489.

Gram Formula Mass = mass of the solute/formula mass of the solute. It is always expressed in the unit grams/mole (g/mol).

mass in grams= 0.890 g/ml/18.2 ml

                        =0.0489

Hence, Option d exists correct.

A liquid with a density of 0.890 g/ml has a volume of 18.2 ml. its mass in grams is:0.0489.

To learn more about density refer to:

https://brainly.com/question/1354972

#SPJ4

The pressure is 8.81 cm of Hg.

The height of the water in the water barometer is h.

h = 883 cm = 8.83 m

The density of water at 20 ° C is p.

p = 998 g/cm³

The gravity of the earth is g.

g = 1 m/s²

The pressure is,

Pressure = Height × Density × Gravity

P = h × p × g

P = 8.83 × 9.98 × 1

P = 8.81 cm of Hg

Therefore, the pressure is 8.81 cm of Hg.

To know more about density, refer to the below link:

https://brainly.com/question/15164682

#SPJ4

The method used to separate a mixture of ethyl alcohol and water is distillation. Thus option (d) is true.

Distillation is defined as a process involving the conversion of liquid into vapor that is subsequently condensed back into liquid form.

It is a widely used method for separating the mixture based on difference in conditions required to change the phase of components.

Some of the types of distillation are:

Thus, the method used to separate a mixture of ethyl alcohol and water is distillation. Thus option (d) is true.

To learn more about distillation, refer to the link below:

https://brainly.com/question/13345735

#SPJ1

Your question is incomplete, but most probably your complete question was

The apparatus in Image A above is used to separate a mixture of ethyl alcohol and water. The mixture is heated in the flask on the left and the ethyl alcohol drips into the flask on the right after condensing in the cooling tube in the middle. Which method was used to separate the mixture?

a. chromatography

b .filtration

c .sorting

d distillation

Answer:

4.34 times 10^24

Explanation:

number of atoms=7.2 times Avogadro's number

                           =7.2 times 6.02 times 10^23

                           =4.34 times 10^24

Answer:

Explanation: we will multiple the amount of moles to the Avogadro's number for example:                                                                                                        

                                     7.2*6*10 to the power 23

The number of atoms present in reactants of the following chemical equation C₇H₁₆ + O₂ = CO₂ + H₂O is 7 atoms.

The number of atoms in a compound is shown in the chemical formula of the compound.

A chemical formula is a notation indicating the number of atoms of each element present in a compound.

According to this question, the chemical reaction between heptane and oxygen is given as follows:

C₇H₁₆ + O₂ = CO₂ + H₂O

The chemical formula of hexane shows that carbon has 7 atoms in the reactant side.

Therefore, the number of atoms present in reactants of the following chemical equation C₇H₁₆ + O₂ = CO₂ + H₂O is 7 atoms.

Learn more about chemical formula at: https://brainly.com/question/11995171

#SPJ1

Element x is unbibium has an average atomic mass of 122. 224 u and isotopic mass of the least abundant isotope is 237.03

Isotopes are members of a family of an element that all have the same number of protons but different numbers of neutrons and the number of protons in a nucleus determines the element's atomic number on the periodic table called isotopes

Unbibium, also known as element 122 or eka-thorium, is the hypothetical chemical element in the periodic table with the placeholder symbol of Ubb and atomic number 122 and unbibium has two isotopes ³⁷⁴Ubb and ³⁷¹Ubb and this abundant isotope has an isotopic mass of 121. 560 u and a relative abundance of 63. 89% and the isotopic mass of the least abundant isotope is 237.03

Know more about isotopes

https://brainly.com/question/13402546

#SPJ1

The value of k for the reaction in min is 66.5 min will take 82.3% of the compound to decompose.

A first-order reaction is a chemical process in which the rate of the reaction is linearly correlated with the concentration of just one ingredient. In other words, a first-order reaction is a chemical reaction in which only one of the reactants experiences variations in concentration, and this causes the rate of the reaction to vary.

The concentration of one of the reactants determines the first-order reaction rate. The product of the concentrations of two reactants or the square of the concentration of a reactant determines the second-order reaction rate.

To learn more about first order reaction from the given link:

brainly.com/question/12446045

#SPJ4

108.81 grams of phosphorus are present in 3.51 moles of phosphorus trichloride PCl3. The molecular formula of Phosphorus trichloride is PCl3.

How many moles of phosphorus trichloride in 1 gram The answer is 0.0072815837438818. Suppose you are converting between moles and grams of phosphorus trichloride. You can view details for each unit of measure. Molecular weight or grams of phosphorus trichloride The molecular formula of phosphorus trichloride is PCl3.

The SI base unit of substance quantity is the mole.

1 mole equals 1 mole of phosphorus trichloride or 137.332761 grams.

1 mol PCl₃=6.022×10²³molecules

3.51mol PCl₃ =3.51×6.022×10²³

=2.11x10²⁴

Number of atoms present in 1 molecule of PCl₃ =4

108.81 grams of phosphorus are present in 3.51 moles of phosphorus trichloride PCl3. The molecular formula of Phosphorus trichloride is PCl3.

Learn more about Mole concept here https://brainly.com/question/16488605

#SPJ4

Given,

Solid object with an unknown mass

Heat absorbed = 1 x 10² J

Temperature change = 2 K

Before calculating the object's heat capacity let us know what is heat capacity-

q= CΔT

∴ C = q/ΔT

Here,

C= Heat capacity

q= Heat absorbed

ΔT =Temperature change

C = 1x10² / 2

C = 100/2

C = 50 J/K

Hence, heat absorbed is 50 joule/ kelvin.

To learn more about heat capacity refer- https://brainly.com/question/21406849

#SPJ4

Heat Capacity is 50 J/K.

Given, a solid item of undetermined mass

Absorbed heat equals 1 x 10² J

Change in temperature = 2 K

Let's first define heat capacity so that we can calculate the heat capacity of the object:

• Heat capacity is the amount of energy needed to raise an object's temperature by a unit.

•A physical characteristic of matter is its capacity for heat or thermal energy.

• The proportion of absorbed heat to temperature change is known as the heat capacity.

q= CΔT

∴ C = q/ΔT

Here,

Heat capacity =  C

q = Heat taken in

Change in temperature= T

C = 1x10² / 2

C = 100/2

C = 50 J/K

Hence, Heat Capacity is 50 joule / kelvin.

To learn more about heat capacity refer-

brainly.com/question/21406849

#SPJ4

Ten radish seeds were added to container A. Container B had no radish seeds. The purpose of the container B in this experiment is to serve as a control container.

By using controls, the experimenter can reduce the impact of factors other than the one being researched. This allows us to verify that an experiment is testing what it says it is testing. Controls are important for all sorts of experimental testing, regardless of the subject, and this goes beyond science.

Methylene blue is usually employed as a redox indicator in analytical chemistry. The solutions of this chemical are blue when in an oxidizing environment, but turn colorless when exposed to a reducing agent.

To know more about Controls experiment visit:

https://brainly.com/question/4444046

#SPJ9

47.78 grams of Na₃ AlO₃ is produced when  6 × 10²³ molecules of NaOH are consumed.

An equation for a chemical reaction is said to be balanced if both the reactants and the products have the same number of atoms and the total charge for each component of the reaction.

The balanced equation:

2 Al + 6 NaOH --------> 2 Na₃ AlO₃ + 3 H₂

We have 6 × 10²³ molecules of NaOH.

So, the mass of Na₃ AlO₃ will be:

= 6 × 10²³ molecules NaOH × ( 1 mol NaOH / 6.023 × 10²³ molecules NaOH ) × ( 2 mol Na₃ AlO₃ / 6 mol NaOH) × ( 143.9 g Na₃AlO₃ / 1 mol Na₃ AlO₃ )

= 47.78 g Na₃ AlO₃

The mass of Na₃ AlO₃ produced when 6 × 10²³ molecules of NaOH are consumed is 47.78 grams.

Learn more about balanced equation here:

https://brainly.com/question/15355912

#SPJ9

0.0293 m is the molarity of the solution 1.928 g of kno3 into enough water to make 651 ml.

Molar concentration, also known as molarity, quantity concentration, or substance concentration, is a unit used to describe the amount of a substance in a solution expressed as an amount of substance per unit volume of solution. The number of moles per liter, denoted by the unit sign mol/L or mol/dm3 in SI units, is the most often used unit denoting molarity in chemistry. One mol/L of a solution is referred to as one molar, or 1 M.

Because most solutions' volumes only slightly vary with temperature due to thermal expansion, the use of molar concentration in thermodynamics is frequently not practical. Most of the time, this issue may be rectified by adding temperature correction factors or by utilizing a temperature-independent metric.

To learn more molarity  from the given link:

https://brainly.com/question/26873446

#SPJ4

[tex]B_{1*2} H_{1*2} = B_{2} H_{2}[/tex]  is required its molecular formula.

First calculate the empirical formula and mass. Compare the molecular mass to the empirical mass to determine the molecular formula.

Empirical Formula

B: 6.444 g × 1 mol/ 7.078 g = 0.9104 mol

H: 1.803 g × 1 mol/1.980mol = 0.9106 mol

Calculate the mole ratios by dividing the moles of each element by the least number of moles.

B: 0.9104 mol/0.5961 mol = 1.5273

H: 0.9106 mol/0.5961 mol = 1.5276

The empirical formula is BH.

Calculate the empirical formula mass.

10.81 + (1 × 1.008) = 11.818

Molecular formula

30/11.818 = 2.5385 ≈ 2

Multiply the subscripts in the empirical formula by 2.

B₁ₓ₂[tex]H_{1}[/tex]ₓ₂ = B₂[tex]H_{2}[/tex]

This compound is diborane and its molar mass is 27.67 g/mol. If you go back and divide the molecular mass by the empirical mass, the result is 2.000. So B₂[tex]H_{2}[/tex]is the correct molecular formula. (27.67/ 11.818= 2.34).

To learn more about Molecular formula refer to

https://brainly.com/question/24419453

#SPJ4

710 mL volume in ml of 0.3000 m nacl solution is required to produce 0.2150 moles of nacl.

Molar Concentration = number of moles/ volume

volume = number of moles/ molar concentration

volume = 0.2150/ 0.3000 = 0.71  L

volume required = 0.71 L = 0.71L× 1000 mL/L = 710 mL

To learn more about Molar Concentration refer to:

https://brainly.com/question/14469428

#SPJ4

Answer: a) 3.72 x [tex]10^{-11}[/tex]

b) 4.5 x [tex]10^{10}[/tex]

Explanation:

a. 0.0000000000372

= 3.72 x [tex]10^{-11}[/tex]

b. 45,000,000,000

= 4.5 x [tex]10^{10}[/tex]

The resulting pressure of nitrogen is 50 kPa.

Use Boyle's Law (the pressure volume law).

According to this law - volume of a given amount of gas held varies inversely with the applied pressure when the temperature and mass are constant.

p₁V₁ = p₂V₂

V₁ = 10 m³; initial volume of nitrogen gas

p₁ = 125 kPa; initial pressure of nitrogen gas

V₂ = 25 m³; final volume of nitrogen gas

p₂ = ?; final pressure of nitrogen gas

125 kPa × 10 m³ = p₂ × 25 m³

p₂ = (125 kPa × 10 m³)  ÷ 25 m³

p₂ = 50 kPa

More about pressure: brainly.com/question/3083348

#SPJ4

The concentration of hydroxyl ion is 10^-9 M.

When an electrolyte is dissolved in water, it dissociates into ions.

In the above case, the ions are hydrogen (H+) and hydroxyl (OH-).

At a temperature of 298 K,

The ionic product(Kw of water is

Kw = [H+] [OH-] = 10^-14

Here [H+] = Concentration of hydrogen ions

[OH-] = Concentration of hydroxyl ions

Assuming that the above solution is at a temperature of 298 K, the ionic product(Kw) of water is

10^-14 = [10^-5] [OH-]

[OH-] = 10^-9.

Thus, the concentration of hydroxyl ions is 10^-9 M.

To know more about "ionic product of water", refer to the following link:

https://brainly.com/question/2776988?referrer=searchResults

#SPJ4