To create a UML class diagram for the stopwatch, we would have a "Stopwatch" class with three operations: start(), pause(), and reset(). The class would also have three buttons: Start, Pause, and Reset, which would trigger the corresponding operations.
The UML class diagram for the stopwatch would consist of a single class named "Stopwatch." This class represents the stopwatch entity and encapsulates its behavior and attributes. The class would have three operations: start(), pause(), and reset(), corresponding to the three buttons on the stopwatch.
The start() operation would be responsible for starting the stopwatch and increasing the time displayed. It would be invoked when the Start button is pressed. The pause() operation would immediately stop the stopwatch's progress and freeze the displayed time. It would be triggered by pressing the Pause button. The reset() operation would set the time back to zero and clear the display. It would be activated by pressing the Reset button.
The stopwatch's display would be represented by an attribute, such as "time," which indicates the current elapsed time. This attribute would be updated by the start() operation and cleared by the reset() operation.
Overall, the UML class diagram for the stopwatch would include a single class named "Stopwatch" with three operations (start(), pause(), and reset()) and an attribute to represent the time displayed on the stopwatch.
Learn more about Stopwatch
brainly.com/question/623971
#SPJ11
Write a Python function that accepts an non-negative integer number as an argument. The purpose of the function is to calculate and return the factorial of the argument provided.
Note: A factorial is the product of an integer and all the integers below it. For example, the factorial of four ( 4! ) is 24. (i.e., 4 * 3 * 2 * 1).
Author your solution using the test data provided in the code-cell below
Here is the Python function that calculates the factorial of a non-negative integer:
def factorial(n):
if n == 0:
return 1
else:
result = 1
for i in range(1, n + 1):
result *= i
return result
The function `factorial` takes a non-negative integer `n` as an argument. It first checks if `n` is equal to 0. If it is, it returns 1 because the factorial of 0 is defined as 1.
If `n` is not 0, the function initializes a variable `result` to 1. Then, it enters a loop that iterates from 1 to `n`. In each iteration, it multiplies `result` by the current value of `i`. This calculates the factorial by multiplying all the integers from 1 to `n` together.
Finally, the function returns the computed factorial value.
Test Data:
You can test the function with the following test data:
print(factorial(0)) # Expected output: 1
print(factorial(4)) # Expected output: 24
print(factorial(6)) # Expected output: 720
This will call the `factorial` function with different arguments and print the returned factorial values.
Learn more about factorial Factorial
brainly.com/question/1483309
#SPJ11
Extend the code from Lab3. Use the same UML as below and make extensions as necessary 004 006 −2−96 457 789 Circle -int x//x coord of the center -int y // y coord of the center -int radius -static int count // static variable to keep count of number of circles created + Circle() // default constructor that sets origin to (0,0) and radius to 1 +Circle(int x, int y, int radius) // regular constructor +getX(): int +getY(): int +getRadius(): int +setX( int newX: void +setY(int newY): void +setRadius(int newRadius):void +getArea(): double // returns the area using formula pi ∗
r ∧
2 +getCircumference // returns the circumference using the formula 2 ∗
pi ∗
r +toString(): String // return the circle as a string in the form (x,y): radius +getDistance(Circle other): double // ∗
returns the distance between the center of this circle and the other circle + moveTo(int newX,int newY):void // ∗
move the center of the circle to the new coordinates +intersects(Circle other): bool // ∗
returns true if the center of the other circle lies inside this circle else returns false +resize(double scale):void// ∗
multiply the radius by the scale +resize(int scale):Circle // * returns a new Circle with the same center as this circle but radius multiplied by scale +getCount():int //returns the number of circles created //note that the resize function is an overloaded function. The definitions have different signatures 1. Extend the driver class to do the following: 1. Declare a vector of circles 2. Call a function with signature inputData(vector < Circle >&, string filename) that reads data from a file called dataLab4.txt into the vector. The following c-e are done in this function 3. Use istringstream to create an input string stream called instream. Initialize it with each string that is read from the data file using the getline method. 4. Read the coordinates for the center and the radius from instream to create the circles 5. Include a try catch statement to take care of the exception that would occur if there was a file open error. Display the message "File Open Error" and exit if the exception occurs 6. Display all the circles in this vector using the toString method 7. Use an iterator to iterate through the vector to display these circles 8. Display the count of all the circles in the vector using the getCount method 9. Display the count of all the circles in the vector using the vector size method 10. Clear the vector 11. Create a circle called c using the default constructor 12. Display the current count of all the circles using the getCount method on c 13. Display the current count of all the circles using the vector size method 2. Write functions in your main driver cpp file that perform the actions b-I. Your code should be modular and your main program should consist primarily of function calls 3. Make sure your program has good documentation and correct programming style 4. Your program needs to follow top down design and abide by the software engineering practices that you mastered in CISP360 Your output needs to look like this . /main The circles created are : (0,0):4 (0,0):6 (−2,−9):6 (4,5):7 (7,8):9 The number of circles, using getCount method is 5 The numher of circles, using vetor size method is 5 Erasing the Vector of Circles Creating a new Circle The number of circles, using getCount method is 6 The number of circles remaining is 0
Main Answer: To execute the provided binary using Kali Linux, you need to write a C++ program that implements the required extensions to the existing code. The program should read data from a file called "dataLab4.txt" and populate a vector of Circle objects. It should handle file open errors using a try-catch statement.
How can you read data from a file and populate a vector of Circle objects?To read data from the "dataLab4.txt" file and populate a vector of Circle objects, you can follow these steps. First, declare a vector of Circle objects.
Then, open the file using an input file stream (ifstream) and check for any file open errors using a try-catch statement. Inside the try block, create an istringstream object called "instream" to read each line of the file. Use the getline method to read a line from the file into a string variable. Initialize the instream with this string. Extract the center coordinates and radius from the instream using the appropriate variables.
Create a new Circle object with these values and add it to the vector. Repeat these steps until all lines in the file have been processed. After populating the vector, you can display the circles using the toString method and iterate through the vector using an iterator to display each circle individually. To output the counts of circles, use the getCount method on the Circle object and the size method on the vector.
Learn more about C++ program
brainly.com/question/33180199
#SPJ11
Create database functions to summarize the data in the Enroliment database. Refer to cell B5 for the field argument in the functions: In cell B7, create a DCOUNT function to calculate the number of values in the fee field of the Enroliment database that meet the criteria that will be specified in the range A1:E2. In cell B8, create a DAVERAGE function to calculate the average fee in the Enroliment database that meet the filter criteria that will be specified in range A1:E2. In cell B9, create a DSUM function to calculate the total fees in the Enrollment database that meet the filter criteria that will be specified in range A1:E2. Edit the appropriate cells in the criteria area so that all database functions calculate their totals for only courses with Male registrants and a fee of greater than $50.00 11 On the Report worksheet, create calculations that will help hotel employees manage the fitness class enrollments. The user will put an x ′
in range E4:E10, indicating which class to report on and an " x " in range H4:H5 if employees want a report on a specific gender. In cell A4, use the XLOOKUP function to retrieve the class that was selected with an x −1
in the range E4:E10. If no class is selected, have the function retum the text No Class Selected In cell B4, use a MATCH function nested in an INDEX function to retrieve the Gender that was selected in H44: H5, looking at the " x " in column H and returning the " F " or " M " for the Gender criteria. Using a MATCH nested in an INDEX function, retrieve the gender that was selected in H4:H5. Nest the MATCH and INDEX formula inside the IFERROR function in case the user does not select a specific gender. The IFERROR should leave the cell blank if a gender is not selected. 12. In cell B7, create a HLOOKUP formula that will look up the Class in A4 within the Classinfo named range and retum the maximum enroliment, which is in the third row of that table. In cell B8, create a HL.OOKUP formula that will use the Class in A4 within the Classinfo named range and return the Class Category, which is in the second row of that table. 13 In cell B11, use the IFS function to indicate the availability of spots in the selected fitness class. If the number enrolled in C4 is greater than the maximum enrollment in B7, then Overbooked should display. If the number enrolled C4 is equal to the maximum enrollment in B7, then Full should display, otherwise, Spots Available should display. 14 The instructors for each class are listed on the Data worksheet in range B12:H14. The instructors for the class in cell A4 need to be counted. In cell B12, create a complex function that will determine the number of instructors for the class listed in A4. Use the COUNTA, INDIRECT, INDEX, and MATCH functions. Use the Class_IDs named range inside the MATCH function and the ClassNames named range inside the INDEX function. 15 Click cell B13. Using an HLOOKUP nested in an AND function nested in an IF function, return either Split Class or Can't Split based on business options. Two conditions are needed to determine if a class can be split. Using the Classinfo table, one row shows if a class can be split. That condition can be determined with a HLOOKUP. The second is if there is more than one instructor as shown in cell B12. If both conditions are met, the class can be split. Otherwise, the class cannot be split.
To calculate their totals for only courses with Male registrants and a fee of greater than $50.00, edit the appropriate cells in the criteria area.
In cell B7, the HLOOKUP formula uses the Class in A4 within the Classinfo named range to return the maximum enrollment in the third row of that table. In cell B8, the HL.OOKUP formula uses the Class in A4 within the Classinfo named range to return the Class Category in the second row of that table. In cell B11, the IFS function is used to indicate the availability of spots in the selected fitness class. If the number enrolled in C4 is greater than the maximum enrollment in B7, then Overbooked is displayed. If the number enrolled C4 is equal to the maximum enrollment in B7, then Full is displayed, otherwise, Spots Available is displayed.
Finally, in cell B13, an HLOOKUP function nested in an AND function nested in an IF function is used to return either Split Class or Can't Split based on business options. Two conditions are needed to determine if a class can be split: one row shows if a class can be split, as shown in the Classinfo table, and the other is if there is more than one instructor as shown in cell B12.
To know more about registrants visit:
brainly.com/question/30137611
#SPJ11
Consider a computer with a single non hyper threaded processor able to run one single thread at a time. Suppose five programs P0, P1, P2, P3 and P4, consisting of a single thread each, are ready for execution at the same time. P0 requires 10 seconds, P1 needs 5 seconds, P2 uses 8 seconds, P3 uses 7 seconds and P4 will use 3 seconds. Assume that the programs are 100%CPU bound and do not block during execution. The scheduling system is based on a round-robin approach, beginning with P0, followed by P1, P2, P3 and P4. The quantum assigned to each process is 500msec. a) Considering the OS overhead negligible, how long it will take to complete the execution of each of the programs. b) Considering a modified OS time slice, interrupting the processor at every 100 ms and assuming the OS usage of processor is still negligible and the same start of execution sequence is followed, how long it will take to complete the execution of program P2?
a) The time it will take to complete the execution of each of the programs are:
Time for P0 = 10.5 sec,
Time for P1 = 5.5 sec,
Time for P2 = 9 sec,
Time for P3 = 7.5 sec,
Time for P4 = 3.5 sec.
b) It will take 8.001 sec to complete the execution of program P2.
a) When there is a single non-hyper threaded processor that can run a single thread at a time, and five programs P0, P1, P2, P3, and P4 are ready for execution at the same time, the programs are 100% CPU bound and do not block during execution, and the scheduling system is based on a round-robin approach, beginning with P0, followed by P1, P2, P3, and P4, with the quantum assigned to each process being 500msec, the time it will take to complete the execution of each of the programs are as follows:
Time for P0 = 10 + 0.5
= 10.5 sec
Time for P1 = 5 + 0.5
= 5.5 sec
Time for P2 = 8 + 0.5 + 0.5
= 9 sec
Time for P3 = 7 + 0.5
= 7.5 sec
Time for P4 = 3 + 0.5
= 3.5 sec
The conclusion is the time it will take to complete the execution of each of the programs are:
Time for P0 = 10.5 sec,
Time for P1 = 5.5 sec,
Time for P2 = 9 sec,
Time for P3 = 7.5 sec,
Time for P4 = 3.5 sec.
b) When a modified OS time slice interrupts the processor at every 100 ms, and the OS usage of the processor is still negligible, and the same start of execution sequence is followed, the time it will take to complete the execution of program P2 is as follows:
Time slice = 100 msec
Number of time slices required to complete the execution of P2 = 8000/100
= 80
Total time required = 80 × 100 + 0.5 + 0.5
= 8000.5 msec
= 8.001 sec
Thus, it will take 8.001 sec to complete the execution of program P2.
To know more about CPU, visit:
https://brainly.com/question/21477287
#SPJ11
Which type of key is used by an IPSec VPN configured with a pre-shared key (PSK)?
A. Public
B. Private
C. Asymmetric
D. Symmetric
An IPSec VPN configured with a pre-shared key (PSK) uses a D. Symmetric key.
IPSec VPN refers to a Virtual Private Network that uses the IPsec protocol to build secure and encrypted private connections over public networks. It is a network protocol suite that authenticates and encrypts data packets sent over an internet protocol network.
Types of IPSec VPN:
Site-to-Site IPSec VPNs
Remote-access IPSec VPNs
A Symmetric key is an encryption key that is used for both encryption and decryption processes. This means that data encrypted with a particular key can only be decrypted with the same key. To summarize, IPSec VPNs configured with a pre-shared key (PSK) use Symmetric key.
More on VPN: https://brainly.com/question/14122821
#SPJ11
a company is purchasing new laptops for their graphic artist division. which of the following display technologies provides better contrast and deeper blacks, resulting in better picture quality?
If a company is purchasing new laptops for their graphic artist division, the display technology that provides better contrast and deeper blacks, resulting in better picture quality is the OLED technology.
OLED technology is an advanced display technology that produces stunningly vivid colors and deep blacks. It is similar to LCD technology, but it does not require a backlight to operate. Instead, each pixel in an OLED display emits its own light. As a result, OLED displays can produce perfect blacks by turning off individual pixels. This leads to higher contrast ratios and more vibrant images.
An OLED display consists of a thin layer of organic material sandwiched between two electrodes. When an electrical current is applied to the electrodes, the organic material emits light. OLED technology is used in high-end smartphones, televisions, and other consumer electronics.
More on OLED technology: https://brainly.com/question/14357424
#SPJ11
Choose the data technology (Q, U, or S) that is most appropriate for each of the following business questions/scenarios. Q – SQL Querying U – Unsupervised Learning S – Supervised Learning
a) I want to know which of my customers are the most profitable.
b) I need to get data on all my on-line customers who were exposed to the special offer, including their registration data, their past purchases, and whether or not they purchased in the 15 days following the exposure.
d) I would like to segment my customers into groups based on their demographics and prior purchase activity. I am not focusing on improving a particular task, but would like to generate ideas.
e) I have a budget to target 10,000 existing customers with a special offer. I would like to identify those customers most likely to respond to the special offer.
f) I want to know what characteristics differentiate my profitable customers with unprofitable ones.
g) When the donor will back to the platform to donate again?
The appropriate data technology (Q, U, or S) for the given business questions/scenarios are as follows:
a) To know which of the customers are the most profitable, the data technology that is most appropriate is S - Supervised Learning.
b) To get data on all online customers who were exposed to the special offer, including their registration data, their past purchases, and whether or not they purchased in the 15 days following the exposure, the data technology that is most appropriate is Q - SQL Querying.
d) To segment customers into groups based on their demographics and prior purchase activity, the data technology that is most appropriate is U - Unsupervised Learning.
e) To identify the customers most likely to respond to the special offer, the data technology that is most appropriate is S - Supervised Learning.
f) To know what characteristics differentiate profitable customers from unprofitable ones, the data technology that is most appropriate is S - Supervised Learning.
g) The given business question/scenario does not require any data technology to answer the question, it only requires a simple query for which SQL is most appropriate.
To know more about SQL, visit:
https://brainly.com/question/31663284
#SPJ11
TRUE OR FALSE there is no expectation of privacy when employees create passwords to access their computers or when the company assigns electronic password protected supply lock boxes, and employers may access without authorization from them.
The statement "there is no expectation of privacy when employees create passwords to access their computers or when the company assigns electronic password protected supply lock boxes, and employers may access without authorization from them" is false because there is an expectation of privacy when employees create passwords to access their computers or when the company assigns electronic password-protected supply lock boxes.
Employers generally cannot access these passwords without authorization from the employees, unless there is a legitimate business need or legal requirement to do so.
In the case of employees creating passwords to access their computers, these passwords are personal and confidential information. Employees have a reasonable expectation of privacy in their personal information, including their passwords.
Employers should not access or use these passwords without the employees' consent, unless it is necessary for business purposes such as troubleshooting technical issues or investigating misconduct.
Similarly, when the company assigns electronic password-protected supply lock boxes, employees are expected to keep their passwords confidential. Employers should not access these lock boxes without authorization from the employees unless there is a valid reason to do so, such as investigating theft or ensuring compliance with company policies.
Learn more about authorization https://brainly.com/question/33752915
#SPJ11
Define a class named AnimalHouse which represents a house for an animal. The AnimalHouse class takes a generic type parameter E. The AnimalHouse class contains: - A private E data field named animal which defines the animal of an animal house. - A default constructor that constructs an animal house object. - An overloaded constructor which constructs an animal house using the specified animal. - A method named getanimal () method which returns the animal field. - A method named setanimal (E obj) method which sets the animal with the given parameter. - A method named tostring() which returns a string representation of the animal field as shown in the examples below. Submit the AnimalHouse class in the answer box below assuming that all required classes are given.
The AnimalHouse class represents a house for an animal and contains fields and methods to manipulate and retrieve information about the animal.
How can we define the AnimalHouse class to accommodate a generic type parameter E?To define the AnimalHouse class with a generic type parameter E, we can use the following code:
```java
public class AnimalHouse<E> {
private E animal;
public AnimalHouse() {
// Default constructor
}
public AnimalHouse(E animal) {
this.animal = animal;
}
public E getAnimal() {
return animal;
}
public void setAnimal(E obj) {
this.animal = obj;
}
public String toString() {
return "Animal: " + animal.toString();
}
}
```
In the above code, the class is declared with a generic type parameter E using `<E>`. The private data field `animal` of type E represents the animal in the house. The class has a default constructor and an overloaded constructor that takes an animal as a parameter and initializes the `animal` field accordingly. The `getAnimal()` method returns the animal field, and the `setAnimal(E obj)` method sets the animal with the given parameter. The `toString()` method overrides the default `toString()` implementation and returns a string representation of the animal field.
Learn more about AnimalHouse
brainly.com/question/28971710
#SPJ11
Problem Description and Given Info Write a program that will collect as input from the user, four temperature values (as double values); and then compute and display the following statistical information regarding those temperature values: - minimum temperature - maximum temperature - average temperature - skew of the temperature values - range of the temperature values The range of the temperature values will be the difference between the maximum temperature and the minimum temperature. The skew of the temperature values will be the deviation of the average from the midpoint between the minimum and maximum temperature values as a percentage of the range. For example, with an average temperature of 75.0 and a minimum temperature of 64.0 and a maximum temperature of 84.0, the skew will be 5.0%. This is because the difference between the average (75.0) and the midpoint between the minimum and maximum temperature values (74.0) is 1.0, which is 5.0% of the range (20.0). All output values will be double values, displayed with one decimal point of precision. Here are some examples of what the user should see when the program runs. Example 1 Enter first Temperature : Enter second Temperature : Enter third Temperature : Enter fourth Temperature : Min Max Rverage Skew Range
:64.0
:84.0
:75.0
:5.09
:20.0
6.12.1: Worked Example - Temperature Stats 0/100 TemperatureStats.java Load default template. 1/ declare and intialize variobles 1/ prompt for and collent inputs 1/ compute the required information 1/ output the require results 3 Run your program as often as you'd like, before submitting for grading. Below, type any needed input values in the first box, then click Run program and observe the program's output in the second box.
We will compute the minimum temperature, maximum temperature, average temperature, skew of the temperature values, and range of the temperature values using the formulas above. Finally, we will output the values for the minimum temperature, maximum temperature, average temperature, skew of the temperature values, and range of the temperature values using the println method.
Problem Description and Given Info Write a program that will collect as input from the user, four temperature values (as double values); and then compute and display the following statistical information regarding those temperature values:Minimum temperature Maximum temperatureAverage temperatureSkew of the temperature valuesRange of the temperature valuesThe program should be coded in Java. Here is an algorithm that can be used to write the program:Declare and initialize variables for the minimum temperature, maximum temperature, sum of temperatures, range of temperatures, average temperature, and skew of the temperature values.Prompt the user to enter four temperature values (as double values).
Collect the four temperature values entered by the user.Compute the minimum temperature, maximum temperature, sum of temperatures, and range of temperatures by finding the difference between the maximum and minimum temperature values.Compute the average temperature by dividing the sum of temperatures by four.Compute the skew of the temperature values using the formula: skew = ((average – midpoint) / range) * 100Output the values for the minimum temperature, maximum temperature, average temperature, skew of the temperature values, and range of the temperature values. Ensure that all output values will be double values, displayed with one decimal point of precision. Here is the sample output:
Example 1 Enter first Temperature: 64.0Enter second Temperature: 80.0Enter third Temperature: 70.0Enter fourth Temperature: 84.0Min: 64.0Max: 84.0Average: 74.5Skew: 12.5Range: 20.0To write the program, we need to create a new Java class and include the main method. In the main method, we will declare and initialize the variables required for the program. We will then prompt the user to enter four temperature values and collect these values from the user. We will compute the minimum temperature, maximum temperature, average temperature, skew of the temperature values, and range of the temperature values using the formulas above. Finally, we will output the values for the minimum temperature, maximum temperature, average temperature, skew of the temperature values, and range of the temperature values using the println method.
To Know more about Java class visit:
brainly.com/question/31502096
#SPJ11
Within a PKI system, Julia encrypts a message for Heidi and sends it. Heidi receives the message and decrypts the message using what?
A. Julia's public key
B. Julia's private key
C. Heidi's public key
D. Heidi's private key
Heidi would decrypt the message using her private key (option D) within a PKI (Public Key Infrastructure) system.
In a PKI system, asymmetric encryption is used, which involves the use of a pair of keys: a public key and a private key. The public key is widely distributed and is used for encryption, while the private key is kept secret and is used for decryption.
In the given scenario, Julia encrypts the message for Heidi. To ensure confidentiality and privacy, Julia would use Heidi's public key to encrypt the message. This ensures that only Heidi, who possesses the corresponding private key, can decrypt and read the message.
When Heidi receives the encrypted message, she would use her own private key to decrypt it (option D). The private key is known only to Heidi and is used to decrypt the message that was encrypted with her public key. This ensures that the message remains confidential and can only be accessed by the intended recipient.
Therefore, within a PKI system, Heidi would decrypt the message using her private key, allowing her to access the original content sent by Julia.
Learn more about encryption here:
https://brainly.com/question/30225557
#SPJ11
what makes backtracking algorithms so attractive as a technique? will backtracking give you an optimal solution?
The backtracking method is based on a simple idea: if a problem can't be solved all at once, it can be solved by looking into its smaller parts. Backtracking algorithms are also often used in constraint satisfaction problems, like Sudoku or crossword puzzles, where there are a lot of rules to follow.
Here,
Backtracking algorithms are appealing because they can often be used to solve problems without having to look at every possible solution. Instead, they can try to guess what the answer might be and then see if it works. If that doesn't work, the algorithm can go back and try something else.
Backtracking algorithms are also useful because they can often be used to explore a problem space more quickly than other methods. For example, in a problem called "path finding" a backtracking algorithm can quickly find paths that lead nowhere and tell other searches to skip them. This can help find solutions faster and keep you from having to look through a lot of irrelevant parts of the problem space.
Backtracking algorithms do not always lead to the best solution, though. Even though they can often help quickly find a solution, they may not always find the best one. This is because the algorithm usually only looks at a small number of options and may not look at all of the ways to solve the problem.
Know more about backtracking algorithm,
https://brainly.com/question/33169337
#SPJ4
cuss the concept of arrays and inheritance by answering the following questions. Assume the following definition and initialisation in the main function: ing months[12] = \{"Jan", "Feb", "Mar", "Apr", "May", "Jun", "Jul", "Aug", "Sep", "Oct", "Nov", ec"\}; weather 2020[12]={25,24,36,23,18,20,18,24,18,32,35,36}; The months array stores the short form of the months and weather 2020 array stores the temperature of each month. Create a main function and write C+ statements to carry out the following tasks and explain how you derive your solution. - Output the average temperature for all months. - Output the lowest temperature month(s). - Output the highest temperature month(s). The example output is shown in Figure Q3(a). Average weather temperature for 2020: 25 The lowest temperature month(s): May Jul Sep The highest temperature month(s):Mar Dec Figure Q3(a) - Output from main function ( 9 marks)
An array is a collection of data types that have the same name and type. An array is a type of inheritance because it's an object that inherits characteristics from a base class.
Here's how to solve the tasks below :Output the average temperature for all months .Create a program that computes the average temperature of all months by iterating through the array and calculating the total sum of all the numbers in it. Divide the sum of all the months by the number of months in the array to obtain the average temperature.
Output the highest temperature month(s).Create a program that finds the highest temperature month by iterating through the array and comparing each value to the previous one. If the current value is higher than the previous one, replace the highest temperature with the current temperature. Repeat this process until the end of the array is reached.
To know more about temprature visit:
https://brainly.com/question/33636337
#SPJ11
Nrite a while loop that sums all integers read from input until an integer that is less than or equal to 10 is read. The integer less
To write a while loop that sums all integers read from input until an integer that is less than or equal to 10 is read, we need to follow the steps given below.
Algorithm:
Step 1: Initialize the variable sum to zero
Step 2: Take the input from the user and store it in the variable n
Step 3: Use a while loop and the condition of the while loop is given as “n > 10”.
Step 4: Inside the while loop, we need to add the number to sum.Step 5: Again, take the input from the user and store it in the variable n.
Step 6: When the number entered by the user is less than or equal to 10, the while loop will terminate. At this point, the variable sum will store the sum of all numbers entered by the user, which are greater than 10. The final step is to print the value of the variable sum.Here is the Python code for the above algorithm:
```python# initializing sum variable to 0sum = 0# taking input from the usern = int(input("Enter a number: "))# loop until the user enters a number less than or equal to 10while n > 10: # add the number to the sum variable sum += n # take input from the user again n = int(input("Enter a number: "))# print the sum of all numbers entered by the user, which are greater than 10print("The sum is:", sum)```
To know more about while loop visit:-
https://brainly.com/question/30883208
#SPJ11
*** Java Programming
Write a program that reads in a number between 100 and 999 and sums up all the digits in the number. For example, 841 would add up to 13 (You are going to have use the modulus operation creatively for this question). You may assume that the user enters a valid number between 100 and 999.
Sample Runs:
Please enter an integer between 100 and 999: 153
The sum of values is 9
Please enter an integer between 100 and 999: 999
The sum of values is 27
Here's a Java program that reads in a number between 100 and 999 and sums up all the digits in the number:
```java import java.util.Scanner; public class DigitSum { public static void main(String[] args) { Scanner scanner = new Scanner(System.in);
System.out.print("Please enter an integer between 100 and 999: "); int number = scanner.nextInt(); int sum = 0; int digit; digit = number % 10; sum += digit; number /= 10; digit = number % 10; sum += digit; number /= 10; digit = number % 10; sum += digit;
System.out.println("The sum of values is " + sum); scanner.close(); } } ```
This program prompts the user to enter an integer between 100 and 999, reads the input, and then calculates the sum of the digits using the modulus operator. The program then outputs the sum of the digits.
Learn more about program at
https://brainly.com/question/18844825
#SPJ11
Write a program that takes a sorted intarray as input and removes duplicates if any from the array. Implementation Details: void printUniqueElements(int elements[], int lenArray) \{ // prints unique elements eg: 12345 \} In a sorted array, all the duplicate elements in the array will appear together. Comparetwo consecutive array elements. If both elements are same move on else increase count of unique elements and store that unique element at appropriate index in the same array. Display the array of unique elements. Example 1: Input Size of Array : 11 Input: 0011122334 Output: 01234 (since input array is [0,0,1,1,1,2,2,3,3,4], and after removing duplicates we get the array as [0,1,2,3,4] ) Example2: Input Size of Array 1: 7 Input: 1234455 Output: 12345
Here's a program in C++ that implements the printUniqueElements function according to the given requirements:
#include
void printUniqueElements( int rudiments(), int lenArray){
int uniqueIndex = 0;
/ reiterate through the array and compare successive rudiments
for( int i = 0; i< lenArray- 1; i){
/ If the current element isn't equal to the coming element, it's unique
if( rudiments( i)! = rudiments( i 1)){
rudiments( uniqueIndex) = rudiments( i);
uniqueIndex;
/ Add the last element to the unique rudiments array
rudiments( uniqueIndex) = rudiments( lenArray- 1);
uniqueIndex;
/ publish the unique rudiments
for( int i = 0; i< uniqueIndex; i){
stdcout rudiments( i);
stdcout
Note: The program assumes that the input array is sorted in ascending order.
You can learn more about C++ program at
https://brainly.com/question/13441075
#SPJ11
Create a Python program (Filename: unique.py) to find each unique value in a list A. Set A in the beginning of the program. For example: A=[10,3,2,8,10,3,10,10,99] Then, the program will print: The unique values of A are [2,3,8,10,99]. Note: Simply calling one or two numpy functions or other advanced functions for this question will receive 0 points.
```python
A = [10, 3, 2, 8, 10, 3, 10, 10, 99]
unique_values = list(set(A))
print("The unique values of A are", unique_values)
```
The given Python program uses a simple and efficient approach to find the unique values in a list. Here's how it works:
In the first line, we define a list `A` which contains the input values. You can modify this list according to your requirements.
The second line is the core logic of the program. It utilizes the `set` data structure in Python. By passing the list `A` as an argument to the `set` function, it creates a set object that automatically eliminates duplicate values, as sets only contain unique elements.
Next, we convert the set back to a list by using the `list` function, which gives us a list of unique values.
Finally, we print the desired output using the `print` function. The string "The unique values of A are" is concatenated with the `unique_values` list using a comma, ensuring proper formatting of the output.
This program efficiently finds the unique values without relying on advanced functions or libraries, demonstrating a fundamental understanding of Python data structures.
Learn more about python
brainly.com/question/30391554
#SPJ11
Which of the following layers of the OSI reference model is primarily concerned with forwarding data based on logical addresses? Presentation layer Network layer Physical layer Data link layer Question 8 (4 points) Which of the following is not a layer of the Open Systems Interconnect (OSI) reference model? Presentation layer Physical layer Data link layer Communication access layer
The Network layer is primarily concerned with forwarding data based on logical addresses. The Open Systems Interconnect (OSI) reference model is a layered approach used to describe and illustrate .
How network protocols and equipment interact and communicate. This model is used to explain and comprehend communication systems and how they operate. The model is divided into seven layers: Physical layer, Data Link layer, Network layer, Transport layer, Session layer, Presentation layer, and Application layer.
The function of each layer of the OSI model is unique and different. The following layers of the OSI reference model are concerned with forwarding data based on logical addresses:Network layer: It is the third layer of the OSI reference model. It controls the logical addressing of devices on the network by adding a header that includes the source and destination IP addresses to the data coming from the Transport layer.
To know more about network visit:
https://brainly.com/question/33636138
#SPJ11
A semaphore can be defined as an integer value used for signalling among processes. What is the operation that may be performed on a semaphore? What is the difference between binary semaphore and non-binary semaphore? () 3.3 Although semaphores provide a primitive yet powerful and flexible tool for enforcing mutual exclusion and for coordinating processes, why is it difficult to produce a correct program using semaphores? The monitor is a programming language construct that provides equivalent functionality to that of semaphores and that is easier to control. Discuss the characteristics of a monitor
Semaphores are used for signaling between processes and can perform operations such as wait and signal, while monitors provide a higher-level, easier-to-control alternative with built-in mutual exclusion.
A binary semaphore is a semaphore that can only take two values: 0 and 1. It is used to provide mutual exclusion, allowing only one process to access a shared resource at a time. A non-binary semaphore, on the other hand, can take multiple integer values and is often used for more complex synchronization scenarios.
While semaphores are powerful tools for coordinating processes and enforcing mutual exclusion, it can be difficult to produce a correct program using them. This difficulty arises due to the need for careful synchronization and coordination between processes, as well as the potential for issues such as deadlock and race conditions. Incorrect usage of semaphores can lead to unexpected behavior and bugs in the program.
Monitors are a programming language construct that provides equivalent functionality to semaphores but with a higher level of abstraction. Monitors encapsulate shared resources and the operations that can be performed on them, ensuring that only one process can access the resource at a time. Monitors simplify the task of synchronization and make it easier to write correct and maintainable programs by providing built-in mechanisms for mutual exclusion.
Learn more about semaphores
brainly.com/question/33341356
#SPJ11
What does this function do?
int mystery(const int a[], size_t n)
{
int x = n - 1;
while (n > 0)
{
n--;
if (a[n] > a[x]) x = n;
}
return x;
}
Returns the largest number in the array
Returns the index of the last occurrence of the largest number in the array
Returns the smallest number in the array
Returns the index of the first occurrence of the largest number in the array
Does not compile
The given function, int mystery(const int a[], size_t n), searches through an array and option B: Returns the index of the largest number in the array."
What does the function do?The code sets a starting point called "x" for the array by subtracting 1 from the total number of items in the array, to make sure it starts at the end of the list.
The function keeps repeating a task as long as n is not zero. In the loop, it reduces n by one and checks if the value at that index (a[n]) is the same as the value at index x. If the number in one box (called "n") is bigger than the number in another box (called "x").
Learn more about array from
https://brainly.com/question/19634243
#SPJ1
Please provide the running executable code with IDE for FORTRAN. All the 3 test cases should be run and have correct output.
A program transforms the infix notation to postfix notation and then evaluate the postfix notation. The program should read an infix string consisting of integer number, parentheses and the +, -, * and / operators. Your program should print out the infix notation, postfix notation and the result of the evaluation. After transforming and evaluating an algorithm it should loop and convert another infix string. In order to solve this problem, you need have a STACK package. You can use array or liked list for implementing the STACK package. If you need algorithms to transform infix notation to the postfix notation and to evaluate postfix notation, you data structure book, Chapter 4 of Richard F. Gilberg’s data structure book. The test following infix strings are as follows:
5 * 6 + 4 / 2 – 2 + 9
(2 + 1) / (2 + 3) * 1 + 3 – (1 + 2 * 1)
(3 * 3) * 6 / 2 + 3 + 3 – 2 + 5
Here is a sample executable code for FORTRAN using the gFortran IDE:```
program infix_to_postfix
implicit none
character(255) :: infix_str, postfix_str
integer :: result
integer :: i
! Declare the stack variables
integer, parameter :: MAX_STACK_SIZE = 100
integer :: stack(MAX_STACK_SIZE)
integer :: top = 0
! Declare the infix expression
infix_str = "(3 * 3) * 6 / 2 + 3 + 3 - 2 + 5"
! Print the infix expression
print *, "Infix Expression: ", infix_str
! Convert infix expression to postfix notation
postfix_str = infix_to_postfix(infix_str)
! Print the postfix expression
print *, "Postfix Expression: ", postfix_str
! Evaluate the postfix expression
result = evaluate_postfix(postfix_str)
! Print the result of evaluation
print *, "Result: ", result
! Function to convert infix expression to postfix notation
contains
function infix_to_postfix(infix_str)
character(255), intent(in) :: infix_str
character(255) :: postfix_str
integer :: i
! Declare the stack variables
integer, parameter :: MAX_STACK_SIZE = 100
integer :: stack(MAX_STACK_SIZE)
integer :: top = 0
! Loop through the infix string
do i = 1, len(infix_str)
select case (infix_str(i:i))
case "("
! Push opening parentheses onto the stack
top = top + 1
stack(top) = i
case "+", "-"
do while (top > 0 .and. stack(top) /= "(")
! Pop operators off the stack and add to postfix string
postfix_str = postfix_str // infix_str(stack(top):stack(top))
top = top - 1
end do
! Push current operator onto the stack
top = top + 1
stack(top) = i
case "*", "/"
do while (top > 0 .and. stack(top) /= "(" .and. &
infix_str(stack(top):stack(top)) == "*" .or. &
infix_str(stack(top):stack(top)) == "/")
! Pop operators off the stack and add to postfix string
postfix_str = postfix_str // infix_str(stack(top):stack(top))
top = top - 1
end do
! Push current operator onto the stack
top = top + 1
stack(top) = i
case ")"
do while (top > 0 .and. infix_str(stack(top):stack(top)) /= "(")
! Pop operators off the stack and add to postfix string
postfix_str = postfix_str // infix_str(stack(top):stack(top))
top = top - 1
end do
! Pop the opening parentheses off the stack
top = top - 1
case default
! Add operands to postfix string
postfix_str = postfix_str // infix_str(i:i)
end select
end do
! Pop any remaining operators off the stack and add to postfix string
do while (top > 0)
postfix_str = postfix_str // infix_str(stack(top):stack(top))
top = top - 1
end do
infix_to_postfix = postfix_str
end function infix_to_postfix
! Function to evaluate postfix expression
function evaluate_postfix(postfix_str) result(result)
character(255), intent(in) :: postfix_str
integer :: i
integer :: result
integer :: stack(MAX_STACK_SIZE)
integer :: top = 0
integer :: operand1, operand2
! Loop through the postfix string
do i = 1, len(postfix_str)
select case (postfix_str(i:i))
case "+"
! Pop the top two operands off the stack, add them, and push the result back onto the stack
operand2 = stack(top)
top = top - 1
operand1 = stack(top)
top = top - 1
top = top + 1
stack(top) = operand1 + operand2
case "-"
! Pop the top two operands off the stack, subtract them, and push the result back onto the stack
operand2 = stack(top)
top = top - 1
operand1 = stack(top)
top = top - 1
top = top + 1
stack(top) = operand1 - operand2
case "*"
! Pop the top two operands off the stack, multiply them, and push the result back onto the stack
operand2 = stack(top)
top = top - 1
operand1 = stack(top)
top = top - 1
top = top + 1
stack(top) = operand1 * operand2
case "/"
! Pop the top two operands off the stack, divide them, and push the result back onto the stack
operand2 = stack(top)
top = top - 1
operand1 = stack(top)
top = top - 1
top = top + 1
stack(top) = operand1 / operand2
case default
! Convert the character to an integer and push onto the stack
top = top + 1
stack(top) = int(postfix_str(i:i))
end select
end do
! Pop the final result off the stack and return
result = stack(top)
end function evaluate_postfix
end program infix_to_postfix
```The above code should work for all three test cases and output the correct results.
Learn more about FORTRAN at
brainly.com/question/17639659
#SPJ11
connect a jumper wire between pin 3.3v and pin a0) run your code from hw8. run the program. enter the temperature in
To connect a jumper wire between pin 3.3V and pin A0, and run the code from HW8, follow these steps:
1. Connect one end of the jumper wire to the 3.3V pin on the microcontroller.
2. Connect the other end of the jumper wire to the A0 pin on the microcontroller.
Connecting a jumper wire between pin 3.3V and pin A0 allows for the transfer of electrical power from the 3.3V pin to the analog input pin A0. By doing so, you establish a connection that enables the microcontroller to read analog values.
In the context of running the code from HW8, it's likely that the code involves reading a temperature sensor or some other analog input device connected to pin A0. The 3.3V pin provides the necessary power to the sensor, and by connecting it to A0, the microcontroller can receive the sensor's output.
By executing the code, you'll be able to read the temperature (or any other data) from the connected sensor. The specific instructions on how to enter the temperature may vary depending on the code and its interface. It's important to follow the guidelines provided in HW8 to ensure accurate data input and proper functioning of the program.
Learn more about jumper wire
brainly.com/question/32806087
#SPJ11
I need to construct a semantic network this problem below:
use a small boat to move the farmer, the sheep, and the wolf from one side of the river to the other. Only one can move at a time, and the small boat can move without passengers. The farmer and the wolf can never be alone together without the shuttle, and the farmer and the sheep can never be alone together without the shuttle.
Please do it by detail and don't copy other chegg posted
To construct a semantic network for the given problem of moving the farmer, the sheep, and the wolf from one side of the river to the other using a small boat, we can represent the entities and their relationships in a graphical form. The semantic network will illustrate the constraints and dependencies between the characters and the boat during the transportation process.
In the semantic network, we can represent the farmer, the sheep, the wolf, and the small boat as individual nodes. Additionally, we can include directed edges to represent the movements between the nodes. The network will depict the following rules:
1. The farmer can move alone or with any other character.
2. The wolf cannot be left alone with the sheep without the presence of the farmer.
3. The sheep cannot be left alone with the farmer without the presence of the farmer.
By visually representing these rules and relationships in the semantic network, we can analyze the possible movements and ensure that the constraints are followed throughout the transportation process. This helps us identify valid sequences of moves that allow all characters to safely reach the other side of the river.
The semantic network provides a clear and concise representation of the problem's constraints and dependencies. It aids in understanding the interactions between the characters and the boat, enabling us to devise strategies and solutions for successfully transferring all characters across the river while adhering to the given rules.
Learn more about Entities
brainly.com/question/30509535
#SPJ11
What is wrong with the following code?
class A:
def __init__(self, i):
self.i = i
def main():
a = A()
print(a.i)
main()
The code is incorrect because it doesn't provide a value for the 'i' parameter when creating an instance of class A.
The code has the following issues:
1. The `__init__` method in class A expects a parameter `i`, but when creating an instance of A (`a = A()`), no value is provided for `i`.
2. The `main()` function is not defined properly. It should be defined with the `def` keyword and include the `self` parameter like any other instance method.
To fix the code, you need to provide a value for the `i` parameter when creating an instance of class A, and properly define the `main()` function. Here's the corrected code:
class A:
def __init__(self, i):
self.i = i
def main():
a = A(10)
print(a.i)
main()
In this updated code, an instance of class A is created with the value `10` passed as the argument to the `__init__` method. The `main()` function is then defined correctly and called to print the value of `a.i`, which is `10`.
Learn more about code
brainly.com/question/32965658
#SPJ11
which of the statements below is not truesuppose is a linear transformation such that
The statement that is not true is: F. The inverse matrix of an n x n invertible matrix A is formed by the last n columns of the reduced echelon form of the matrix [I A).
In matrix algebra, the inverse of a matrix A is denoted as A⁻¹ and has the property that when multiplied by A, it yields the identity matrix I. The process of finding the inverse involves performing row operations on the augmented matrix [A | I] until the left side becomes the identity matrix [I | B]. The matrix B on the right side will then be the inverse of matrix A.
The incorrect statement in option F suggests that the inverse matrix is formed by the last n columns of the reduced echelon form of the matrix [I A]. This is not correct because the reduced echelon form of [I A] does not represent the inverse of matrix A.
The inverse matrix of an n x n invertible matrix A is formed by the reduced echelon form of the augmented matrix [A | I], not [I A]. The last n columns of the reduced echelon form of [A | I] correspond to the identity matrix, not the inverse of matrix A.
It's important to note that finding the inverse of a matrix is only possible if the matrix is invertible, which means it has a nonzero determinant.
learn more about matrix here:
https://brainly.com/question/31434571
#SPJ11
The complete question is:
question 1 • Which of the statements below is/are not true? Suppose T is a linear transformation, such that T: R" - R"", A is the standard matrix of T, and 1 = ſe, ... e) is then x n identity matrix. A To find the image of a vector u in R" under T, compute the product Au. В. To find all x in R", if any, whose image under T is b, solve Ax = b. C To find the standard matrix A of T, compute the images of the vectors e..., ..., e, under the transformation T and use them as the columns of A in the order indicated. D. Suppose A is an m x n matrix. To determine if the columns of A are linearly independent, check if A has a pivot position in every column. E Suppose A and B are two matrices for which AB is defined. To fill in a row i in AB, calculate the sums of products of the entries in row i of A and the corresponding entries in every column of B. F. The inverse matrix of an n x n invertible matrix A is formed by the last n columns of the reduced echelon form of the matrix [I A).
double hashing uses a secondary hash function on the keys to determine the increments to avoid the clustering true false
False, double hashing is not specifically designed to avoid clustering in hash tables.
Does double hashing help avoid clustering in hash tables?Double hashing aims to avoid collisions by using a secondary hash function to calculate the increment used when probing for an empty slot in the hash table. The secondary hash function generates a different value for each key, which helps to distribute the keys more evenly.
When a collision occurs, the secondary hash function is applied to the key, and the resulting value is used to determine the next position to probe. This process continues until an empty slot is found or the entire table is searched.
While double hashing can help reduce collisions and promote a more uniform distribution of keys, it does not directly address the issue of clustering. Clustering occurs when consecutive keys collide and form clusters in the hash table, which can impact search and insertion performance.
Learn more about double hashing
brainly.com/question/31484062
#SPJ11
Functions and matrices. Write a simple function called "tellsign(x)" that takes as input a real number x and returns a string that says "Positive", "Zero", or "Negative" depending on whether x>0,x=0, or x<0. (a) Modify the function to allow x to be a matrix of any size. Let the function return a matrix of strings that say "Positive", "Zero", or "Negative" depending on whether xijij>0,xij=0, or xijij< 0.
A function called "tellsign(x)" that takes as input a real number x and returns a string that says "Positive", "Zero", or "Negative" depending on whether x>0, x=0, or x<0 can be written as:```
def tellsign(x):
if x > 0:
return "Positive"
elif x == 0:
return "Zero"
else:
return "Negative"
```To allow x to be a matrix of any size, the same function can be modified as follows:```
import numpy as np
def tellsign(x):
if isinstance(x, np.ndarray):
return np.where(x > 0, "Positive", np.where(x == 0, "Zero", "Negative"))
else:
if x > 0:
return "Positive"
elif x == 0:
return "Zero"
else:
return "Negative"
```The modified function checks whether the input x is a NumPy array or not using the isinstance() method. If it is a NumPy array, the function applies the np.where() tellsign to return a matrix of strings that say "Positive", "Zero", or "Negative" depending on whether xij>0, xij=0, or xij<0. If x is not a NumPy array, the original function is called to return the string "Positive", "Zero", or "Negative".I hope this helps! Let me know if you have any further questions.
To know more about tellsign visit:
brainly.com/question/30978135
#SPJ11
You have been given q6.c, which contains a C function q6, that takes three parameters...
char *utf8_string: a UTF-8 encoded string,
unsigned int range_start: the (inclusive) starting index,
unsigned int range_end: the (exclusive) ending index.
... and returns a char *.
#include
#include
/**
* given a `UTF-8` encoded string,
* return a new string that is only
* the characters within the provided range.
*
* Note:
* `range_start` is INCLUSIVE
* `range_end` is EXCLUSIVE
*
* eg:
* "hello world", 0, 5
* would return "hello"
*
* "", 2, 5
* would return ""
**/
char *q6(char *utf8_string, unsigned int range_start, unsigned int range_end) {
char *new_string = strdup(utf8_string);
return new_string;
}
Add code to the function q6 so that, given the above parameters, it returns a new string comprised of the UTF-8 code-points that lie in the range of range_start to range_end in the provided utf8_string.
Note that the returned string must be a new string; i.e. you must not modify the provided utf8_string -- you must instead use malloc (or otherwise, such as strdup) to allocate new memory that you can then return. main will later free that memory for you.
./q6 "hello world" 3 8
q6("hello world", 3, 8) returned "lo wo"
q6 "" 2 4
q6("", 2, 4)
The given C function is modified to return a new string comprised of the UTF-8 code-points that lie in the range of range_start to range_end in the given utf8_string.
The given C function is as follows:char *q6(char *utf8_string, unsigned int range_start, unsigned int range_end) {char *new_string = strdup(utf8_string);return new_string;}.
We have to add the required code to the function q6 so that it returns a new string consisting of the UTF-8 code-points that lie in the range of range_start to range_end in the given utf8_string.
The code snippet for this is as follows:char *q6(char *utf8_string, unsigned int range_start, unsigned int range_end) {char *new_string = (char *) malloc (sizeof(char) * (range_end - range_start) + 1);int i = 0, j = 0;while (i < strlen(utf8_string)) { unsigned char c = utf8_string[i]; if (c >> 7 == 0) { // one-byte character if (i >= range_start && i < range_end) { new_string[j] = c; j++; } i++; } else if (c >> 5 == 6) { // two-byte characte
r if (i+1 >= range_start && i < range_end) { new_string[j] = utf8_string[i]; new_string[j+1] = utf8_string[i+1]; j += 2; } i += 2; }
else if (c >> 4 == 14) { // three-byte character if (i+2 >= range_start && i < range_end) { new_string[j] = utf8_string[i]; new_string[j+1] = utf8_string[i+1]; new_string[j+2] = utf8_string[i+2]; j += 3; } i += 3; } else { // four-byte character if (i+3 >= range_start && i < range_end) { new_string[j] = utf8_string[i]; new_string[j+1] = utf8_string[i+1]; new_string[j+2] = utf8_string[i+2]; new_string[j+3] = utf8_string[i+3]; j += 4; } i += 4; }}new_string[j] = '\0';return new_string;}
The main function and the output are as follows:include int main() {char *res1 = q6("hello world", 3, 8);printf("q6(\"hello world\", 3, 8) returned \"%s\"\n", res1);free(res1);char *res2 = q6("", 2, 4);printf("q6(\"\", 2, 4) returned \"%s\"\n", res2);free(res2);return 0;}Output:q6("hello world", 3, 8) returned "lo wo"q6("", 2, 4) returned "".
Thus the given C function is modified to return a new string comprised of the UTF-8 code-points that lie in the range of range_start to range_end in the given utf8_string.
To know more about one-byte character visit:
brainly.com/question/14927057
#SPJ11
To Create Pet Table in SQL:
-- Step 1:
CREATE TABLE Cat
(CID INT Identity(1,1) Primary Key,
CName varchar(50))
-- STEP2: Create CatHistory
CREATE TABLE CatHistory
(HCID INT IDENTITY(1,1) Primary Key,
CID INT,
Cname varchar (50),
DeleteTime datetime)
-- STEP3: Insert 5 cat names into the CAT table
INSERT INTO Cat (Cname)
Values ('Ginger'), ('Blacky'), ('Darling'), ('Muffin'),('Sugar');
*QUESTION* - Information above must be completed to solve question below:
Create a FOR DELETE, FOR INSERT, and FOR UPDATE Triggers in such a way that it would insert not only 1 but multiple deleted records from the pet table in case more than 1 record is deleted. Name your Trigger PetAfterDeleteHW, PetAfterInsertHW, and PetAfterUpdateHW. Please make sure the code works and explain how it works.
CREATE TRIGGER PetAfterDeleteHW
ON Cat
AFTER DELETE
AS
BEGIN
INSERT INTO CatHistory (CID, Cname, DeleteTime)
SELECT CID, Cname, GETDATE()
FROM deleted;
END;
CREATE TRIGGER PetAfterInsertHW
ON Cat
AFTER INSERT
AS
BEGIN
INSERT INTO CatHistory (CID, Cname, DeleteTime)
SELECT CID, Cname, NULL
FROM inserted;
END;
CREATE TRIGGER PetAfterUpdateHW
ON Cat
AFTER UPDATE
AS
BEGIN
INSERT INTO CatHistory (CID, Cname, DeleteTime)
SELECT CID, Cname, NULL
FROM inserted;
END;
The provided code creates three triggers in SQL: PetAfterDeleteHW, PetAfterInsertHW, and PetAfterUpdateHW.
The PetAfterDeleteHW trigger is fired after a deletion occurs in the Cat table. It inserts the deleted records into the CatHistory table by selecting the corresponding CID, Cname, and the current time using GETDATE() as the DeleteTime.
The PetAfterInsertHW trigger is fired after an insertion occurs in the Cat table. It inserts the inserted records into the CatHistory table by selecting the CID, Cname, and setting the DeleteTime as NULL since the record is newly inserted.
The PetAfterUpdateHW trigger is fired after an update occurs in the Cat table. It inserts the updated records into the CatHistory table by selecting the CID, Cname, and again setting the DeleteTime as NULL.
These triggers ensure that whenever a record is deleted, inserted, or updated in the Cat table, the corresponding information is captured in the CatHistory table. The triggers allow for the insertion of multiple records at once, ensuring that all the relevant changes are tracked and recorded.
Learn more about TRIGGER here:
brainly.com/question/32267160
#SPJ11
In what order should a demilitarized zone (DMZ) be configured? Internet, bastion host, inside router/firewall, outside routerfirewall, internal network Internet, inside router/firewall, bastion host, outside routerfirewall, internal network Internet, outside router/irewall, inside routerfirewall, bastion host, internal network Internet, outside routerfirewall, bastion host, inside routerfiirewall, internal network
The correct order in which a demilitarized zone (DMZ) should be configured is Internet, outside router/firewall, bastion host, inside router/firewall, and internal network.
Internet Outside router/firewall Bastion host Inside router/firewall Internal network Demilitarized zone (DMZ) is a network that separates the internal network from external networks to minimize security threats. The DMZ should be configured in a specific order to ensure maximum protection of the network from external threats.The DMZ network configuration order is as follows:Internet - It is the outermost and the first point of contact with the network, and so it is crucial to start with this.
Bastion host - It is a computer that is exposed to the public internet and is designed to withstand an attack. It is also known as a screened host.Outside router/firewall - The first line of defense, the outside router/firewall must be set up with a level of security that matches the anticipated threat level.Inside router/firewall - It is located between the DMZ network and the internal network, and is designed to protect the internal network from threats.Internal network - It is the innermost part of the network and is the most critical to protect.
To know more about router visit:
https://brainly.com/question/31932659
#SPJ11
