Identify each lettered part of the circuit, and explain what each part does.

Help please!!!

In order for the pilot to drop food packets over the entire terrain, he must fly in a specific pattern to ensure that no areas are missed.

One common pattern used for this type of operation is called the grid pattern. In the grid pattern, the terrain is divided into a grid of equal-sized squares. The pilot then flies over the terrain in a series of parallel lines, dropping food packets at regular intervals. Once the end of the terrain is reached, the pilot turns and flies back in the opposite direction, dropping packets at the same regular intervals. The distance between the parallel lines is determined by the size of the squares in the grid, and the regular intervals at which packets are dropped are determined by the desired coverage density. By flying in this pattern, the pilot can ensure that no areas of the terrain are missed, and that the food packets are distributed evenly throughout the entire area. This method is commonly used in agriculture and forestry applications, as well as in search and rescue operations.

To learn more about pilot refer to this link

https://brainly.com/question/16525265

#SPJ4

Answer:

6 units

Explanation:

Gravitational force between two objects is given by the equation

[tex]F = G \dfrac{m_1m_2}{r^2}[/tex]

where

[tex]G =[/tex]universal gravitational constant
[tex]m_1[/tex], [tex];m_2[/tex] are the masses of the objects

[tex]r[/tex] = distance between the objects

We are given that F = 18 units.

If m₁ is tripled and r is also tripled then

new F = F':

[tex]F' = G \dfrac{3m_1 \cdot m_2}{(3r)^2}\\\\\\F' = G \dfrac{3m_1 \cdot m_2}{9r^{2}}\\\\\\So \dfrac{F'}{F} = G \dfrac{3m_1 \cdot m_2}{9r^{2}} \div G \dfrac{m_1 \cdot m_2}{r^{2}}[/tex]

[tex]= \dfrac{3}{9} = \dfrac{1}{3}\\[/tex]

Therefore the new F is 1/3 of the old f

In this case that would be 18/3 = 6 units

As per the question the average power delivered by the engine is 67,500 Watts or 90 HP.

Average power is the amount of energy used on average or the amount of labor completed on average per unit of time. The average power is only used to indicate power in certain circumstances. For instance, the average power likewise rises as cumulative work is increased. The average power declines, however, if there is no change in the amount of labor performed over a continuously growing period of time.

Therefore, work that can be completed in a short amount of time requires more average power, whereas work that must be done over an extended period of time requires less average power. A thorough definition of average power is available.

The SI abbreviation for average power is "w," where "w" stands for Joules per second.

According to question:

Work done = force * distance = m*a*d and power = energy/time

The vo=0 and vf = 25 m/s and t=7 sec. This gives...

3.6 m/s^2 as acceleration and d=87.5 meters and thus F=ma= 5400 N.

Energy = 5400*87.5 = 4.7E5 Joules (2 sig. figs) and Power = 67,500 Watts or 90 HP.

To know more about average power visit:

https://brainly.com/question/29845488

#SPJ4

The correct statement include:

(a) An object can gain a static charge by gaining or losing protons.

(b) Static charges are transferred between objects until both have the same charge or no charge.

(d). Different objects can gain or lose static charges at different rates.

Static charges are transferred between objects until both have the same charge or no charge:

When two objects come into contact, or are placed near each other, electrons can be transferred from one object to the other. The object that loses electrons becomes positively charged, and the object that gains electrons becomes negatively charged. This transfer of electrons continues until both objects have the same charge or no charge.

Learn more about static charge here: https://brainly.com/question/18562731

#SPJ1

Answer:

1020 meters

Explanation:

To determine the distance from a lightning strike, you can use the time elapsed between seeing the flash of lightning and hearing the thunder.

The speed of sound in air is approximately 340 m/s. So the distance from the lightning can be calculated as:

distance = (time elapsed) x (speed of sound) = 3 seconds x 340 m/s = 1020 meters.

Note: This calculation is a rough estimate and does not take into account other factors such as air temperature, atmospheric pressure, and altitude, which can affect the speed of sound.

ALLEN

The clay's angular speed is 6.45 rad/s.

The energy loss to thermal energy is 1500.51 J

This is defined as the attribute of any rotating object that is supplied by the moment of inertia multiplied by the angular velocity.

The conservation of angular momentum principle states that angular momentum remains constant until an external force is applied.

L = angular momentum (I*)

where I denotes the moment of inertia and w denotes the angular speed

Angular momentum previously: Lb = It*0

Angular momentum following: La = (It + Ic)*1

(It + Ic)*1 = It*0

1 = the angular velocity after

0 = 1*[It/(It + Ic)])

ω₁ = I₀ω₀ / I₁

I0 = The turntable's moment of inertia

A cylinder's moment of inertia Equals 12mr2.

I₀ = ½(34)(2.1) (2.1) = 74.97 kgm²

I₁ = I0 + I(clay) = 74.97 kgm2 + m(clay)*r(clay)2 = 74.97 kgm2 + (12)*(1.1)² = 89.49 kgm²

1 = I0/I1 = 74.97*7.7/89.49= 6.45rad/s

Energy conversion to thermal energy

Some energy is wasted when the clay deforms and clings to the turntable, therefore energy is not preserved. We can conclude:

E₁= ½I₁ω₁² = ½ × 89.49 × 6.45² = 3723.007

E₀ = ½I₀ω₀² = ½ × 74.97 × 7.7² = 2222.496

Et= E₁ - E₀ = 3723.007-2222.496 = - 1500.51 J

This number is negative, indicating that 1500.5 J of thermal energy was wasted.

Learn more about angular velocity  from here;

https://brainly.com/question/29557272

#SPJ4

Roughly spherical/surface smoothed by gravity and must be within 30 AU of the Sun. Mass is the amount of matter a planet contains and is typically measured in kilograms. Size is the diameter of a planet and is typically measured in kilometers.

Roughly spherical/surface refers to a shape or object that has a generally round or curved shape, but with some irregularities on its surface.

Examples include planets, apples, and even some rocks. This type of shape is often used for objects that need to be able to roll or move in some way, since the curved shape helps it move more easily.

The surface of the Earth is a roughly spherical surface, as it has small bumps and hills, valleys, and other imperfections that make it slightly misshapen .Planet characteristics include their mass, size, surface gravity, orbital period, atmosphere, and distance from the sun.

Surface gravity is the force of gravity on a planet's surface and is typically measured in meters per second squared. Orbital period is the amount of time it takes for a planet to make one full orbit around the sun and is measured in years.

Atmosphere is the gases that make up a planet’s air, such as oxygen, nitrogen, and carbon dioxide, and is measured in pressure.

Therefore, Distance from the sun is the average distance from the center of the sun to a planet and is measured in astronomical units.

Learn more about surface here:

https://brainly.com/question/28267043

#SPJ4

As electrons are constantly ejected from the metal, it becomes increasingly positive in charge. The magnitude of positive charge eventually becomes large enough to attract the ejected electrons.

The photoelectric effect is a phenomenon in which electrons are ejected from the surface of a metal when light is incident on it. These ejected electrons are known as photoelectrons. It is important to note that the emission of photoelectrons and the kinetic energy of the ejected photoelectrons are affected by the frequency of the incident light on the metal's surface. Photoemission is the process by which photoelectrons are ejected from the surface of a metal due to the action of light.

Electrons on the metal's surface absorb energy from incident light and use it to overcome the attractive forces that bind them to the metallic nuclei, resulting in the photoelectric effect.

To know more about Ejected electrons go through:-

https://brainly.com/question/28174467

#SPJ4

The acceleration of the elevator is [tex]2.19 m/s^2[/tex], calculated using Newton's second law and the forces on the hanging mass.

The acceleration of the elevator can be determined by analyzing the forces acting on the hanging mass. When the elevator is in motion, the hanging mass is subjected to two forces: its weight (mg), which always points downward, and the tension force in the spring scale, which is equal in magnitude but opposite in direction to the weight (since the mass is not accelerating vertically).

Using Newton's second law of motion (F=ma), we can set up the following equation:

T - mg = ma

where T is the tension force in the spring scale, m is the mass of the hanging mass (10.0 kg), and a is the acceleration of the elevator (which we want to find).

Substituting the given values, we get:

120 N - (10.0 kg)[tex](9.81 m/s^2)[/tex] = (10.0 kg) a

Simplifying and solving for a, we get:

a = (120 N - 98.1 N) / (10.0 kg) =[tex]2.19 m/s^2[/tex]

Therefore, the acceleration of the elevator is [tex]2.19 m/s^2[/tex].

To learn more about acceleration, refer:

https://brainly.com/question/14602789

#SPJ4

The runner's speed is 1.91 m/s. The speed of a runner can be calculated by multiplying their step length (the distance covered by one step) by their stride frequency (the number of steps taken per unit time).  

We can calculate the runner's speed using the formula:

speed = step length x stride frequency

Plugging in the given values:

speed = 1.50 m/step x 76 steps/min

We first need to convert the units of stride frequency to strides/second:

76 steps/min x 1 min/60 s = 1.27 strides/s

Now, we can substitute this value into the formula:

speed = 1.50 m/step x 1.27 strides/s

Simplifying the expression:

speed = 1.91 m/s

Therefore, the runner's speed is 1.91 m/s.

Step length can be influenced by a number of factors, including a runner's height, leg length, and running form. Stride frequency, on the other hand, is largely determined by a runner's running speed. As a runner increases their speed, their stride frequency tends to increase as well. However, there is a limit to how fast a runner can move their legs, and at a certain point, increases in speed are achieved through increases in step length rather than stride frequency.

Measuring step length and stride frequency can be useful for runners who want to optimize their running form and efficiency. By increasing their step length or stride frequency, runners can increase their speed without necessarily increasing their energy expenditure. However, it's important to note that there is no "ideal" step length or stride frequency that works for everyone. Runners should experiment with different stride lengths and frequencies to find what feels most comfortable and efficient for them.

Learn more about speed here:

https://brainly.com/question/14421054

#SPJ4

7.695 * 106. is the correct number of significant numbers.

In positional notation, significant figures refer to the digits in a number that are trustworthy and required to denote the amount of something, also known as the significant digits, accuracy, or resolution.

Only the digits allowed by the measurement resolution are dependable, hence only these can be important figures if a number expressing the outcome of a measurement (such as length, pressure, volume, or mass) has more digits than the number of digits allowed by the measurement resolution.

The first three digits (1, 1 and 4, displaying 114 mm) are certain, thus they are utilized in calculations.

Therefore, 7.695 * 106. is the correct number of significant numbers.

To learn more about Significant numbers, refer to the link:

https://brainly.com/question/30313640

#SPJ1

Average speed is determined by dividing the whole distance you travelled by the total time, whereas average velocity is determined by your displacement line connecting your starting location and finishing point.

To calculate the average velocity based on the displacement for the entire period taken. The displacement, which is the smallest distance between the initial and final points, is shown as the dash between the final point here and the dash between the starting point here.

And by using the bye to Chris rule, we can obtain this or dash. The route will therefore be 30 square plus 40 square, which equals 50 kilometres.

Therefore, 50 km divided by the total time represents the average speed in terms of magnitude. It has been an hour. And as a result, we are given the average velocity's magnitude as 50 km/h.

Learn more about average velocity here:

https://brainly.com/question/862972

#SPJ1

Move perfect mirror to the right by 86.2 nm to produce minimum power at detector and minimum power is 0.225 mW.

To create an interferometer using a 50-50 beam splitter and two mirrors, we can split a laser beam into two paths using the beam splitter, bounce one path off a perfect mirror, and the other off a mirror that does not reflect all light.

In this setup, interference between the two paths of the laser light can produce a pattern of constructive and destructive interference, which can be detected at a detector.

If the detected power is initially at its maximum, we can move the perfect mirror to the right to produce a minimum power at the detector. This is because moving the mirror changes the path length difference between the two paths of the laser light, and this can change the interference pattern.

To determine how much we need to move the perfect mirror, we can use the fact that the detected power is maximum when the two paths of the laser light are in phase, and minimum when they are out of phase. When only the vertical arm is blocked, the power measured at the detector is 2.25 mw, and when only the horizontal arm is blocked, the power measured at the detector is 2.025 mw.

The power detected at the detector is given by:

P = [tex](1/2) * P_in * (1 +- cos(Δφ))[/tex]

where[tex]P_in[/tex] is the incident power, Δφ is the phase difference between the two paths of the laser light, and the ± sign depends on which path is blocked.

When the power is maximum, the phase difference is an integer multiple of 2π, i.e., Δφ = [tex]2\pi n[/tex]. When the power is minimum, the phase difference is an odd multiple of π, i.e., Δφ = [tex](2n+1)\pi /2.[/tex]

We can solve for the phase difference in terms of the incident power and the measured powers:

Δφ = [tex]arccos[(4P_min/P_in) - 1][/tex]

where [tex]P_min[/tex] is the minimum power detected at the detector, which is 2.025 mw.

Plugging in the values, we get:

Δφ = [tex]arccos[(4*2.025/9) - 1] = 2.18 radians[/tex]

To produce a minimum power at the detector, we need to change the phase difference to [tex](2n+1)\pi /2[/tex]. This means we need to move the perfect mirror by a distance Δx such that:

Δφ = [tex](2n+1)\pi /2 = 1.57, 4.71, 7.85, ...[/tex]

We can use the wavelength of the laser to determine the distance Δx:

Δx = Δφ * λ / [tex]2\pi[/tex]

lambda: wavelength of laser = 300 nm

Put values:

Δx = 86.2 nm

So we need to move the perfect mirror to the right by 86.2 nm to produce a minimum power at the detector, and the minimum power at the detector is 0.225 mW.

Learn more about power here:

https://brainly.com/question/14780060

#SPJ4

The blower uses 100 volts of the difference in potential when consumes current of 3 c/s in a time of 5.10min

The bulb is filled with a gas, typically a mixture of nitrogen and argon, that reduces the oxygen in the bulb to help stop the filament from burning. A filament with a high electric current resistance is made of a special wire, usually tungsten.

First, we should convert the power and the time:

Power of blower = 3.0 x 10² J/s

                         = 3.0 x 10² W

Time = 5.10 min

                         = 5.10 x 60 s

                                 = 306 s

Now, Charge = I × t

                        = 3 A × 306 s

                                      = 918 C

Finally, we can calculate the potential difference consumed:

                             ΔV = P × t / Q

                          ΔV = (3.0 x 10² W) × (306 s) / (918 C)

                               ΔV = 100 V

An electrical circuit is completed when a switch is turned on, allowing electric current to flow through its wires. Through the switch, along the wires, and into the light bulb, the current flows from the power source.

Learn more about potential difference :

brainly.com/question/25895069

#SPJ1

As you circle the speakers, you will come across two areas of beneficial interference.

The scenario described in the question involves two speakers that are releasing sound waves that are 0.5 m apart in wavelength. Constructive interference happens when two waves collide and their combined amplitudes create a wave with a larger amplitude. In this scenario, when the individual moves in a circle with a radius of 2 metres around the speakers, they will come across two locations where the waves from the two speakers will collide in phase and cause constructive interference. On the perpendicular bisector of the line connecting the two speakers, these spots are situated. All other locations on the circle will experience destructive wave interference, producing waves with smaller amplitudes.

Learn more about locations here:

https://brainly.com/question/11718756

#SPJ4

The correct option is Grape. Assuming the sun is scaled down to the size of a cantaloupe, Neptune would be approximately the size of a grape.

The actual diameter of the sun is about 1.39 million kilometers, while the diameter of Neptune is about 49,244 kilometers. This means that the sun is about 28 times larger than Neptune. If we scale down the sun to the size of a cantaloupe, which has a diameter of about 13 centimeters, then Neptune would have a diameter of approximately 0.46 centimeters, which is about the size of a grape.

To give you a better idea of the scale involved, let's compare the sizes of the sun and Neptune in their actual sizes. The sun has a diameter of about 1.39 million kilometers, while Neptune has a diameter of about 49,244 kilometers. This means that the sun is over 28 times larger than Neptune in diameter.

To learn more cantaloupe, visit here

https://brainly.com/question/16300159

#SPJ4

With the same continuous broadband masking noise, the 4000-Hz tone is probably harder to distinguish than the 1500-Hz tone.

Generally speaking, lower-frequency noises are more easily concealed or drowned out by ambient noise than higher-frequency ones. Lower-frequency sounds have longer wavelengths than higher-frequency ones, making them more susceptible to interference and phase cancellation from the noise.

Consequently, compared to the 1500-Hz tone, the 4000-Hz tone is perhaps more challenging to distinguish from the same continuous broadband masking noise. The 4000-Hz tone is more sensitive to being masked by background noise because of its higher frequency and shorter wavelength.

Learn more about the frequency of sound at

https://brainly.com/question/14233442

#SPJ4

When the elevator comes to a stop, the supporting cable is held at -3000 N of tension.

A force that is transmitted when a rope, cable, or string is pulled tight is tension. The pulling force that an object exerts on a rope, cable, or string transmits along its length to another object that is attached to the other end is known as tension. The force along the length of a rope or cable that is being stretched or pulled is known as tension in physics.

We must determine the elevator's net force in order to determine the supporting cable's tension. The sum of the elevator's acceleration and mass creates this net force. As a result of the elevator's slowdown in this instance, its acceleration is negative (opposing its velocity).

The elevator's acceleration can be determined using the equation for average acceleration:

where a = (v_f - v_i) / t

The elevator's acceleration is denoted by a, the elevator's final velocity is denoted by v_f, and the initial velocity is denoted by v_i, which is 7.0 m/s. The time interval is denoted by t, which is 3.5 seconds.

a = (0 - 7.0) / 3.5

a = -2.0 m/s²

The net force on the elevator is given by the equation:

F_net = m × a

where:

F_net is the net force on the elevator

m is the mass of the elevator (1500 kg)

a is the acceleration of the elevator (-2.0 m/s²)

Substituting the values:

F_net = 1500 × -2.0

F_net = -3000 N

Since the cable is the only force , the tension (T) in the cable must be equal to the net force:

T = F_net

T = -3000 N

Learn more about Tension:

brainly.com/question/24994188

#SPJ1

Answer:

I can tell you that in the realm of physics and philosophy, the existence of things that don't interact with their environment is a concept that has been debated.

In physics, there are concepts like dark matter and dark energy, which are believed to exist based on their gravitational effects on visible matter, but they do not interact with light or other forms of electromagnetic radiation, making them difficult to detect directly.

In philosophy, there are debates about the existence of things like abstract objects, such as numbers or concepts, which are not physical and do not interact with the physical world, but are thought to exist in a different way.

Ultimately, whether or not one accepts the existence of things that don't interact is a matter of personal belief or theoretical framework. Scientifically, the existence of such things can be postulated based on their effects on other things that can be detected, but their ultimate existence may be impossible to prove conclusively.

The engines would need to provide a constant thrust force of approximately 6,040,375 N to allow the 206000 kg jet to take off at the end of a 1450 m runway, assuming negligible drag.

To determine the thrust force required for the jet to take off, we can use the equation:

Thrust force = (1/2) * (mass of jet) * [tex](take-off speed)^2[/tex] / (distance of runway)

Plugging in the given values, we get:

Thrust force = (1/2) * (206000 kg) * [tex](95 m/s)^2[/tex] / (1450 m)

Thrust force = 6,040,375 N

The thrust force required for a jet to take off at the end of a runway can be determined using the equation that takes into account the mass of the jet, take-off speed, and the distance of the runway. Neglecting drag, the engines would need to provide a constant thrust force of approximately 6,040,375 N for a 206000 kg jet to take off at the end of a 1450 m runway.

To learn more about constant thrust force, refer:

https://brainly.com/question/19002844

#SPJ4

The vapour pressure of water at 25 degree Celsius is 23.8 torr.

Vapor pressure is the pressure that's caused by the evaporation of liquids.

Vapor pressure is affected by some common variables.

These variables are three in number that's intermolecular forces, face area and temperature.

The vapor pressure of motes varies under varying temperatures.

If water has a low vapor pressure it means water has high face pressure.

Some exemplifications of vapor pressure are sticky air, LPG cylinders, boiling of liquids, pressure cookers

According to Raoult's law Psolution = Xsolvent , here Psolution is the vapor pressure of the solution, Xsolvent is the mole fraction of the solvent, and

Psolvent is the vapor pressure of the pure solvent.

Learn more about vapour pressure:

https://brainly.com/question/6940437

#SPJ4

This is the initial condition. This has the quantum numbers n=1, l=0, ml=0, and ms=+1/2. We call this "orbital" a 1s orbital since we only need the n and l.

An electron's ground state, or the energy level it ordinarily occupies, is its lowest energy state. There is also a maximum amount of energy that an electron can have while still being a component of its atom. These quantum numbers represent the size, shape, and spatial orientation of an atom's orbitals. The orbital's size is described by the primary quantum number (n). For example, orbitals with n = 2 are bigger than those with n = 1. The ground state is defined as n = 1, whereas higher n states are defined as excited states. As an electron in an atom transitions from a higher to a lower state, it loses energy.

Learn more about energy state from here;

https://brainly.com/question/2289096

#SPJ4

The net force needed to hold the plate to the pipe is nearly the fluid flowing through the stationary orifice plate is [tex]F = p_1A_1+m(V_1-V_2)-p_2A_2[/tex].

Write the momentum equation at the inlet and the exit of the orifice plate.

[tex]p_1A_1-F-p_2A_2=m(V_2-V_1)\\\\F = p_1A_1+m(V_1-V_2)-p_2A_2[/tex]

Here, the inlet pressure is [tex]p_1[/tex] the speeds at the intake and exit are [tex]V_1[/tex] and ,

[tex]V_2[/tex] the fluid's density is, the nozzle's force on water is, the area at the inlet is, [tex]A_1[/tex]  and [tex]A_2[/tex] as well as the area near the exit .

Net force is the vector sum of forces acting on a flyspeck or object. The net force is a single force that replaces the effect of the original forces on the flyspeck's stir. It gives the flyspeck the same acceleration as all those factual forces together as described by Newton's alternate law of stir.

It's possible to determine the necklace associated with the point of operation of a net force so that it maintains the movement of spurts of the object under the original system of forces.

Learn more about net force :

https://brainly.com/question/18881485

#SPJ4

Answer:

Explanation:

Since a neutron star is observed in the center of the Crab Nebula, it is believed that the star that went supernovae was a massive star, many times larger than the sun. When this star ran out of fuel it collapsed to a neutron star, and the outer layers were violently thrown off to form the supernova explosion.

The minimum distance that the observer has to travel in the x direction to hear the smallest possible sound intensity is 0.25 meters.

The distance between adjacent minima is given by,

d = (λ/2) × (D/d)

where λ is the wavelength, D is the distance between the speakers, and d is the distance between the observer and nearest speaker.

The wavelength of the sound is given by,

λ = v/f

where v is the speed of sound and f is the frequency of the sound. Substituting the given values,

λ = 340/680 = 0.5 m

Distance between adjacent minima to solve for d,

d = λ/2 × (D/d)

d^2 = (λ×D)/2

d = sqrt(λ×D/2)

To find the minimum distance, minimize d. This occurs when d is equal to half the wavelength of the sound. Thus,

d = λ/2 = 0.25 m

Solve for D,

D = λ * (d/(λ/2))

D = 2d = 0.5 m

To know more about the speed, here

brainly.com/question/15381147

#SPJ4

Two stars are of equal luminosity. Star A is 3 times as far from you as star B. Star A appears the same brightness as star B.

Luminosity is a measure of the total amount of energy a star emits in a given amount of time. Apparent brightness, on the other hand, is the amount of light that reaches us from a star and is influenced by the star's distance from us, as well as its luminosity.

When two stars have the same luminosity, their apparent brightness will be determined by their distance from us. If star Y is four times dimmer looking than star X on relatively unobscured sightlines, it means that star Y must be farther away from us. This is because the amount of light we receive from a star decreases with increasing distance.

Luminosity: The total amount of energy a star emits.

Apparent brightness: The amount of light that reaches us from a star.

Two stars with the same luminosity: apparent brightness determined by distance from us

Star Y three times dimmer: Farther away from us. Apparent brightness decreases with increasing distance.

Learn more about Stars luminosity:

https://brainly.com/question/13355286

#SPJ4

The correct answer is "kinetic energy decreases because iron shavings move in the direction of magnetic force."

When a horseshoe magnet is moved near a pile of iron shavings, the magnet's magnetic force attracts the shavings, causing them to move toward the magnet. As a result, the iron shavings begin to align along the magnet's magnetic field lines, attaching to both ends of the magnet.

Because the iron shavings are moving in the direction of the magnetic force, they are doing work against it, and this work is transferred from their kinetic energy to the system's magnetic energy. The system's kinetic energy is reduced as a result.

As a result, the correct answer is that kinetic energy decreases as iron shavings move in the direction of magnetic force.

To Learn More About force click

https://brainly.com/question/13191643

#SPJ4

A skier starts from rest and slides 9.00 m down a slope in 3.00 s, in a 12.0 s from the starting will the skier acquire a velocity of 24.0 m/s.

we have t = 3.0 s, Vix = 0 and x = 9.0 m.

x=ut+1/2at^2

a=2x/t^2

a=18/3*3=2.0m/sec^2

Vfinal = Vinitial+at

t= Vfinal-Vinitial/a

t=24/2=12 sec

Here a stands for acceleration which is basically rate of change of velocity

t stands for time period

u stands for initial velocity

The second equation of motion gives the displacement of an object under constant acceleration: x = x 0 + v 0 t + 1 2 a t 2 .

A skier starts from rest and slides 9.00 m down a slope in 3.00 s, in a 12.0 s from the starting will the skier acquire a velocity of 24.0 m/s.

Learn more about skier here:-

brainly.com/question/14031008

#SPJ4

The statement that best explains why measurements of the potential difference across each capacitor and the current in each of the capacitor branches are not sufficient to determine the ratio of capacitances is:

"The resistors in the branches with the capacitors have different resistances and will affect the values of the currents."

The potential difference across the two branches is the same because they are connected in parallel to the same voltage source. However, the resistors in the branches with the capacitors have different resistances, which will affect the values of the currents flowing through each capacitor. Since the capacitors are connected in parallel, the potential difference across them is the same, but the charges and capacitances can be different.

To determine the ratio of the capacitances, the student needs to use additional information or measurements, such as the time constant of the circuit, the total current flowing through the circuit, or the charge stored in each capacitor. The only equation for a capacitor that is applicable at steady state is V = Q/C, which relates the potential difference across a capacitor (V) to the charge stored on the plates (Q) and the capacitance (C).

For more questions on capacitors-

brainly.com/question/27393410

#SPJ4

Answer:

it is elastic potential energy

Explanation: