A is the initial reaction when a chlorine bond splits into two chlorine radicals.
What are radicals?In chemistry, a radical is an atom, molecule, or ion that has an unpaired valence electron.
The question is based on Radical Chain Reaction. And these reactions have three different phases: Initiation, Propagation and Termination.
Reaction A- Initiation
Reaction B- Termination
Reaction C- propagation
Learn more about the radicals here:
https://brainly.com/question/1369233
#SPJ1
Which element is most likely to have a high thermal conductivity
Copper has the highest thermal conductivity as compared to other metals in the periodic table.
What is thermal conductivity?Thermal conductivity refers to the rate at which heat is transferred by conduction through a unit cross-section area of a material. When a temperature increases at one end it moves to the other end through conduction.
So we can conclude that Copper has the highest thermal conductivity as compared to other metals in the periodic table.
Learn more about thermal here: https://brainly.com/question/19666326
#SPJ1
What is periodicity?
the quality of being periodic the tangency to record the intervals
the prediotic of the sun sports cycle
The ideal gas law only approximates the behaviour of real gases. The conditions
under which the ideal gas law is MOST accurate are
a. Low pressure and high temperature
b. Low pressure and low temperature
c. High pressure and high temperature
d. High pressure and low temperature
Which of the following could have been formed by reacting iron with sulfur?
A. Iron oxide
B. Sulfuric iron
C. Iron sulfide
D. Sulfuric acid
Answer: C
Explanation:
iron sulfide.
Answer:
C. Iron sulfide
Explanation:
Stay safe, stay healthy and blessed
Have a good day
Thank you
what is the molecular formula of Ferric Oxide with criss-cross method
Answer: Fe2O3
Explanation: By applying crisscross method, the formula will be Fe2O3.
How many milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda? Show your work.
225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
How to calculate volume?The volume of a substance can be calculated using the following formula:
molarity = no of moles ÷ volume
no of moles of baking soda (NaHCO3) = mass ÷ molar mass
Molar mass of baking soda = 84.007g/mol
no of moles = 15g ÷ 84.007g/mol = 0.18mol
0.8 = 0.18/volume
volume = 0.23L equivalent to 225mL
Therefore, 225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Learn more about volume at: https://brainly.com/question/1578538
#SPJ1
225 millilitres of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Define molarity of a solution.Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
[tex]Molality = \frac{Moles \;solute}{Volume of solution in litre}[/tex]
[tex]Moles of baking soda (NaHCO_3) =\frac{mass}{molar \;mass}[/tex]
Molar mass of baking soda = 84.007g/mol
[tex]Moles of baking soda (NaHCO_3) =\frac{15g}{84.007g/mol}[/tex]
[tex]Moles of baking soda (NaHCO_3) = 0.18mol[/tex]
Now, calculating volume with the molarity formula:
Molality = [tex]\frac{Moles \;solute}{Volume \;of \;solution \;in \;litre}[/tex]
0.8 = [tex]\frac{0.18 }{Volume \;of \;solution \;in \;litre}[/tex]
Volume = 0.23L equivalent to 225mL
Therefore, 225 milliliters of a 0.8 solution of citric acid would be needed to react with 15 g of baking soda.
Learn more about volume at:
brainly.com/question/1578538
#SPJ1
When methane, CH4, is combusted, it produces carbon dioxide, CO₂, according to the unbalanced equation: CH4 +0₂ - CO₂ + H₂O.
Write the balanced equation for this reaction, and explain how it is possible for 10 grams of methane fuel to burn and emit 27 grams of carbon dioxide. Discuss whether or not this reaction obeys the law
of conservation of mass. (5 points)
The balanced equation will be [tex]CH_4 + 2O_2 --- > CO_2 + 2H_2O[/tex]
Stoichiometric problemsThe balanced equation of the reaction would be as follows:
[tex]CH_4 + 2O_2 --- > CO_2 + 2H_2O[/tex]
The mole ratio of methane to carbon dioxide is 1:1.
10 grams of methane will give 10/16 = 0.625 moles
0.625 moles of carbon dioxide would give 0.625 x 44.01 = 27.506 grams.
Thus, 10 grams of methane will produce approximately 27 grams of carbon dioxide stoichiometrically.
The reaction obeys the law of conservation of mass because the atoms of all the elements before and after the reaction are balanced.
More on stoichiometric problems can be found here: https://brainly.com/question/14465605
#SPJ1
10.00 g of LiCl is dissolved in water to make 1.00 L of "Solution A". Then, 100 mL
of solution A were diluted to a volume of 500 mL of "Solution B". What is the
molarity of solution B? (Report your answer to four places past the decimal point.
Moodle is looking for a number only, no units.)
0.47 M is the molarity of solution B if 10.00 g of LiCl is dissolved in water to make 1.00 L of "Solution A".
Define the molarity of a solution.Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
[tex]Molality = \frac{Moles \;solute}{Solvent \;in \;kg}[/tex]
Moles of LiCl
[tex]Moles = \frac{mass}{molar \;mass}[/tex]
[tex]Moles = \frac{10.00 g}{42.394 g/mol}[/tex]
Moles = 0.2358824362
[tex]Molality = \frac{0.2358824362}{0.5 L}[/tex]
Molarity = 0.4717648724 M =0.47 M
Hence, 0.47 M is the molarity of solution B.
Learn more about moles here:
https://brainly.com/question/8455949
#SPJ1
●
As a solution becomes more basic or alkaline, how does it affect the concentration of
H3O* and OH ions?
Heat _____.
can only betransferredif molecules are touching
is always created by friction
is a type of potential energy
is the same as temperature
Suppose you add a cup of sugar to hot water and all of the sugar dissolves. then the water cools and some of the sugar is seen as a solid on the bottom of the beaker. explain why this happened.
Answer:
its becuz the water is not capable to disolve all the salt it has limits and ones it reaches its limit it wont have the ability to disolve any salt
Rank the gases Ar, N2, CH4, and C₂H6 in order of increasing density at STP.
Rank the gases Ar, N2, CH4, and C2H6 in order of increasing density at STP.
ans : CH4
An educated guess which explains observations is called:
a a law
b an experiment
c a hypothesis
d a variable
Answer:
c. a hypothesis is the correct answer
Explanation:
classify the following into colloids, suspensions and true solution: soda water,chalk powder,milk,blood,ink,starch solution,sulphur powder in water,egg albumin.
Answer:
Amm is this right (if is it the right so mark me the brainliest pls)
Explanation:
Answer : Solutions- Brine, Soda water. Suspensions- Muddy river water, Chalk water mixture, Milk of magnesia, Smoke in air. Colloids- Milk, Ink, Blood, shaving cream.
4
25.0 mL of a 0.625 M solution are diluted to a total volume of 100 mL. What is
the molarity of the new solution? (Report your answer to three places past the
decimal point. Moodle is looking for a number only, no units.)
Answer:
.156 M
Explanation:
diluting 25 to 100 cuts the M to 1/4 of the original
1/4 * .625 = .15625
When Earth receives energy from the Sun, ____. a. some energy is reflected back into space b. some is absorbed by the atmosphere c. some is absorbed by land and water on Earth's surface d. all of the above Please select the best answer from the choices provided A B C D
Answer:
D - all of the above
Explanation:
Only certified electricians are allowed to work on facility electrical system?
Which shows an isomer of the molecule below?
Answer: C
Explanation:
A) There is 1 fewer hydrogen atom.
B) There are 2 fewer carbon atoms.
D) There is 1 extra hydrogen atom.
What volume did a helium-filled balloon have at 18.1 °C and 2.61 atm if its new volume was 59.9 mL at 1.92 atm and 12.5°C?
a. 44.9
b. 63.8
c.43.2
d. 83.0
Answer:
a. V=44.9mL
Explanation:
For a gas undergoing all of these changes, it will be important to combine Boyle's Law and Charles' Law to form the following equation (if it isn't already known):
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]
Where the Temperatures must be measured in Kelvin.
Recall that to convert Celsius to Kelvin, one must add 273 or use the equation [tex]T_C+273=T_K[/tex].
Thus, [tex]T_1=(18.1+273)[K]=291.1[K][/tex] and [tex]T_2=(12.5+273)[K]=285.5[K][/tex]
To solve for the requested quantity, note that all of the other units match between beginning and end, so we substitute and solve:
[tex]\dfrac{P_1V_1}{T_1}=\dfrac{P_2V_2}{T_2}[/tex]
[tex]\dfrac{(2.61[atm])V_1}{(291.1[K])}=\dfrac{(1.92[atm])(59.9[mL])}{(285.5[K])}[/tex]
[tex]\dfrac{(2.61[atm] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----})\bold{V_1}}{291.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}*\dfrac{291.1[K] \!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}{2.61[atm]\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!\!{-----}}=\dfrac{(1.92[atm]\!\!\!\!\!\!\!\!\!\!\!{--})(59.9[mL])}{285.5[K\!\!\!\!\!{-}]}*\dfrac{291.1[K\!\!\!\!\!{-}]}{2.61[atm]\!\!\!\!\!\!\!\!\!\!\!{--}}[/tex]
[tex]V_1=44.928677576[mL][/tex]
Accounting for significant digits, [tex]V_1=44.9[mL][/tex]
1. 10.0 g of CaCO 3 on heating gave 4.4 g of CO 2 and 5.6 g of CaO. The observation is in agreement with the law of conservation of mass.
2. hydrogen and oxygen are combined to form two compounds the hydrogen content in one of the compound is 5.93 % and another is 11.2 % is this obey the law of multiple proportion.
3. On analysis it was found that the black oxide of Copper and red oxide of copper contains 80 and 89% of copper respectively Is this obeys the law of multiple proportion.
4.when 8.4 G of NaHco3 is added to the solution of Acetic Acid weighing 20 gram if it is observed that 4.4 gram of Co2 is released into the atmosphere and Residue is left Behind what is the mass of left Residue.
Answer:
According to the law <br> Mass of reactants = mass of product, here <br> `underset(10 g)(CaCO_(3))rarr underset(4.4 g)(CO_(2))+underset(x)(CaO)` <br> Hence, x = 10 g - 4.4 g = 5.6 g <br> Which is mass of CaO.dIn the first compound <br> Hydrogen = 5.93 % <br> Oxygen = `(100-5.93)% = 94.07 %` <br> In the second compound <br> Hydrogen = 11.2 % <br> Oxygen `= (100-11.2)%=88.8%` <br> In the first compound the number of parts by mass of oxygen that combine with one part by mass of hydrogen `=(94.07)/(5.93)=15.86` parts ...(The ratio of Cu combining with fixed weight of oxygen in black and red oxide is 1 : 2 respectively. Step by step solution by experts to help you in doubt clearance & scoring excellent marks in exams.) {Check something more in the above attachment!}Refer to the above attachmentExplanation:
Mark this answer as brainlest answer!!
A scuba diver uses compressed air to breath under water. He starts with an air volume of 3.20 L at sea level (1 atm) at a temperature of 30°C. What is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C?
2.56 L is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C.
What is an ideal gas equation?The ideal gas law (PV = nRT) relates the macroscopic properties of ideal gases. An ideal gas is a gas in which the particles (a) do not attract or repel one another and (b) take up no space (have no volume).
Given data:
[tex]P_1=1 atm[/tex]
[tex]V_1=3.20 L[/tex]
[tex]T_1[/tex]=30°C
[tex]P_2=3 atm[/tex]
[tex]V_2=?[/tex]
[tex]T_2=24°C[/tex]
Using the equation:
[tex]\frac{P_1V_1}{T_1}[/tex] =[tex]\frac{P_2V_2}{T_2}[/tex]
[tex]V_2[/tex] =(1 atm x 3.20 L x 24°C) ÷ 30°C
[tex]V_2[/tex] = 2.56 L
Hence, 2.56 L is the volume of air in his tank at a depth of 100 ft (3 atm) and a temperature of 24°C.
Learn more about the ideal gas here:
https://brainly.com/question/27691721
#SPJ1
What happens to the atomic radius when an electron is gained?
OA. The negative ionic radius is larger than the neutral atomic radius
B. The negative ionic radius is smaller than the neutral atomic radi
C. The negative ionic radius is the same size as the neutral atomic
radius.
D. The negative ionic radius does not follow a trend with the neutra
radius.
The density of water is 1 g/cm3. brent used the following method to convert 1 g/cm3 to kg/m3.
(1 kg = 1,000 g and 1 m = 100 cm)
what is the error in brent's conversion method?
a - 1 kg should be written as 1 g.
b - (1 m)3 should be written as (1 cm)3.
c - 1,000 kg should be written as 1,000 g.
d - (100 cm)3 should be written as (100 m)3.
Answer:
a) The wrong denominator for the equivalent fraction of kilograms to grams
b) The use of the scale factor of length rather than the scale factor of volume for the equivalent fraction of cubic centimeters to cubic meters
c) The arrival at the correct 1000 kg/m³ rather than 0.1 g/m³ based on the expression on the left of the equation
The density of water = 1 g/cm³
The given equation is presented as follows;
1 g/cm³ × 1 kg/(1000 kg) × 100 cm³/(1 m³) = 1000 kg/m³
The error in the conversion method are;
a) The conversion, 1 kg/(1,000 kg) has an error, the correct conversion is (1 kg)/1,000 g)
b) The volume conversion error, 100 cm³/(1 m³), the correct volume conversion is (100 cm)³/(1 m³) = 1,000,000 cm³/(1 m³)
c) The right of the equal to sign error; using the left side expression only, the (wrong) answer is 0.1 g/m³
The correct equation is presented as follows;
1 g/cm³ × 1 kg/(1000 g) × 1,000,000 cm³/(1 m³) = 1000 kg/m³
Explanation: hope this help.
Answer:
c - 1,000 kg should be written as 1,000 g.
Explanation:
got it correct on the test.
What is the change in freezing
point, ATf, when the 0.195 m
aqueous solution of K2S dissolves
into 3 particles?
The change in the freezing point of the solution is 1.1°C.
What is freezing point depression?The freezing point depression is a colligative property thus we must take note of the number of particles in solution.
Using;
ΔT = k m i
k = 1.86 °C/m
m = 0.195 m
i = 3
ΔT = 1.86 °C/m * 0.195 m * 3
ΔT = 1.1°C
Learn kore about freezing point:https://brainly.com/question/3121416
#SPJ1
Answer:
1.0881
Explanation:
Correct answer for Acellus
which are not oxidative reaction?
(look at the image)
Answer:
Cu²+ e ----> Cu+This is not oxidation as it gain electron .
Oxidation reaction means addition of oxygen or removal of hydrogen
or in other words loss of electrons
Mg ----> Mg²+ + 2e
this is oxidation reaction as Mg loss 2e to become +2
Sn³+ -----> Sn4+ + 2e
this is oxidation reaction as it losses electrons
similarly other are also oxidation.
how do we compare the PH of a weak acid and a strong acid of identical concentration and draw a conclusion about the concentration of hydrogen ions?
Answer:
This means that the pH values of strong acids are lower than that of weak acids, which explains why the rate of reaction of strong acids with substances (such as metals, metal carbonates etc) is higher than that of weak acids.
Explanation:
welcome
Find the ratio of the volume divided by the
temperature for the first data pair. Use significant
figures.
V/T=0.72/276= 0.002 ✓
COMPLETE
Now do the same computation for all six pairs of
values. What is the average of all six fractions V/
T?
From the pair of values given, the ratio of the volume to the temperature for the first data pair is, 0.0026 cm³/K
What is a Ratio?A ratio is a comparison between two quantities showing how much one quantity differs from another.
From the data given, the first data pair is as follows ;
Temperature = 276 KVolume = 0.72 cm³Ratio of volume to temperature = volume / temperature
Ratio = 0.72 / 276
Ratio = 0.002608 cm³/K
The significant figure's rule for division is the least number of significant figures used in the operation.
The least significant figure of the values given is 2.
Therefore, the ratio of the volume to the temperature for the first data pair is 0.0026 cm³/K
Learn more about ratio here :
brainly.com/question/25927869
#SPJ1
Answer:
0.0026
Explanation:
edge 2022 it's the same answer for both parts
How many moles of oxygen are in 4.4 moles of Al(NO3)3 ?
Answer: 40. mol (to 2 sf)
Explanation:
Since there are 9 oxygen atoms in every molecule of aluminum nitrate, this means that there are 9 moles of oxygen atoms in each mole of aluminum nitrate.
So, in 4.4 moles, there are 9(4.4) = 40. mol (to 2 sf)
calculate the number of moles in positive and negative ions in 1.75 moles of calcium fluoride quizlet
CaF₂ ⇒ Ca²⁺ + 2F⁻
1.75 1.75 3.5
Justify that the shielding effect of an atom remain constant in a period but atomic size gradually gets smaller (chemistry)
Atomic size decreases across a period because but the positive charge of the nucleus gets increases across a period.
What is the shielding effect?The shielding effect is the shielding from the pulling force of the positively-charged nucleus given to. the outermost shell electrons by the inner electrons.
Since the shielding effect remains constant across a group but the positive charge of the nucleus gets bigger, atomic size decreases across a period.
Learn more about shielding effect at: https://brainly.com/question/19068425
#SPJ1
