if 4.0 l of a 4.9 m srcl2 solution is diluted to 40. l , what is the molarity of the diluted solution?

'The statement the amount of carbon dioxide production produced by the ocean and taken in by the ocean is close to 100% balanced is TRUE.

The relationship between photosynthetic rate and respiration rate is nearly equal in order to maintain homeostasis or internal equilibrium in the biosphere, which can be considered a whole ecosystem.

Therefore, with this data, we can see that the relationship between photosynthetic rate and respiration rate is given by a nearly similar amount of carbon dioxide production and consumption.

Learn more about photosynthetic rate and respiration here:

https://brainly.com/question/16894086

#SPJ1

The 5.3 g mass of ethanol is consumed by the reaction of oxygen gas.

When a wine is exposed to air, a sequence of chemical processes takes place that transforms ethanol, or what we typically know as alcohol, into acetaldehyde.

Oxidization leads to an oxidized wine

Minor oxygen exposure can result in richer, more nuanced flavors that improve the appeal and general quality of wines. However, overexposure has the opposite effect, muting scent, taste, and even color while destroying those nuanced qualities. The wine is deemed to have "oxidized" at this point.

Chemical reaction

CH3 CH2 OH + O2 ---> CH3COOH + H2O

It is balanced.

Molar ratios,

1 mol CH3 CH2OH : 1 mol O2 : 1 mol CH3COOH : 1 mol H2O

Conversion of 7.6 grams of ethanol to moles

Molar mass of CH3CH2OH = 2 * 12g/mol + 6 * 1 g/mol + 16 g/mol = 46 g/mol

moles = mass / molar mass = 7.6 g / 46g/mol = 0.165 mol

Use of proportions with the molar ratios:

1mol CH3CH2OH / 1mol O2 = 0.165 mol CH3CH2OH / x => x = 0.165 mol CH3CH2OH.

Conversion of 0.165 mol O2 to grams

mass in grams = number of moles * molar mass = 0.165 mol * (2 * 16g/mol)

mass = 5.28 g ≈ 5.3 g

To know more about chemical reaction visit:

https://brainly.com/question/11231920

#SPJ4

Answer:

Explanation:

The formation of the silvery lining is an example of a distinct color change (b). A distinct color change is an indicator of a chemical change because it indicates a change in the composition of the material, which is caused by a chemical reaction.

The balanced net ionic equation is:

2Fe⁺³(aq) + 6OH⁻(s) + 6H⁺(aq) + 3SO₄⁻² (aq) → Fe₂(SO₄)₃(s) + 6H₂O(l).

All soluble ionic compounds (those denoted with a (aq)) must be broken down into their corresponding ions in order to write the ionic equation. Each ion needs to be displayed with its charge and a (aq) to signify that it is in solution. Coefficients can be used to display the quantity of each ion.

The net ionic equation is the chemical formula that only displays the substances that are directly involved in the reaction. The spectator ions are also included in a complete ionic equation, whereas a net ionic equation only displays the chemical species that are involved in a reaction.

To know more about net ionic equation visit:

https://brainly.com/question/29299745

#SPJ4

The mass of the products formed 15.416g by pressing the add 10 g button, which added 10 g of Ca(NO₃)₂ to the Na₂CO₃.

An inorganic material is calcium chloride, a salts with chemical formula CaCl₂. It's a white, crystallized substance that is highly water soluble at ambient temperature. Calcium hydroxide and hydrochloric acid can be used to create it in order to neutralise it. An inorganic material is calcium chloride, a salts with chemical formula CaCl₂.

To manufacture tofu, firm soybean curds into tofu, and create a caviar-like substance from vegetable or fruit liquids, calcium chloride is employed as a firming agent in canned vegetables. It is frequently utilised as an electrolyte in bottled water, sports drinks, and other beverages.

Ca(NO₃)₂ must be added in a mass of 61.9 grammes.

Mass of Na₂CO₃=10g

Molar Mass of Na₂CO₃=105.9g/mol

The moles of Na₂CO₃ must first be determined.

Moles of Na₂CO₃=(Mass of Na₂CO₃)/(Molar mass of Na₂CO₃)=10g/(105.9 of mole)=0.094moles

We must now determine the MgO molecular weight.

The balance chemical reaction will be:

Ca(NO₃)₂+Na₂CO₃→CaCO₃+2NaNO₃

We deduce that As, 1 mole of Na₂CO₃ reacts with 1 mole of Ca from the balanced reaction (NO₃)₂

Therefore, 0.094 moles of Na₂CO₃ and 0.094 moles of Ca react (NO₃)₂

We must now determine the mass of Ca(NO₃)₂

Mass of Ca(NO₃)₂=Moles of Ca(NO₃)₂×Molar mass of Ca(NO₃)₂

Molar mass of Ca(NO₃)₂= 164 g/mol

Mass of Ca(NO₃)₂=(0.094moles) ×(164g/mole)=15.416g

Therefore, 15.416 grammes of Ca(NO₃)₂ must have been added.

To know more about Calcium Chloride (CaCl) visit:

https://brainly.com/question/14299159

#SPJ4

The number of protons increases down the group as nuclear charge increases. The element with more electrons has a higher nuclear charge, and thus the nucleus holds electrons more tightly. As a result, At will have a 3s orbital that is closest to the nucleus.

The 1909 Geiger-Marsden gold foil experiment served as the foundation for Ernest Rutherford's 1911 discovery of the atomic nucleus, a tiny, dense region of protons and neutrons at the center of an atom. The quantity of protons decreases with increasing nuclear charge. The nucleus holds electrons more tightly in the element with the most electrons because it has a higher nuclear charge. The positively charged protons and electrically neutral neutrons that make up the nucleus. Protons and neutrons are both composed of quarks.

Here,

As nuclear charge increases, the number of protons decreases. Because the element with the most electrons has a higher nuclear charge, the nucleus holds electrons more tightly. As a result, At will have the closest 3s orbital to the nucleus.

To know more about nucleus of atoms,

https://brainly.com/question/11801308

#SPJ4

By assuming that the water stream is replaced by a stream of cci. Now (a) in case of charged comb ions would likely be deflected (b) in case of pvc pipe no effect on the motion of the ions, (c) in case of charged balloon ions would be deflected.

a. If a stream of charged particles, such as ions in a charged comb, were to replace the water stream, the ions would likely be deflected by the electric field created by the charged comb. This is due to the forces acting on the ions as they move through the electric field. The amount of deflection would depend on the charge and mass of the ions, as well as the strength of the electric field.

b. If a stream of charged particles were to pass through a PVC pipe, the pipe itself would not have a significant effect on the motion of the ions. The ions would continue to move in a straight line, unaffected by the pipe. However, if the PVC pipe is insulated, it will not cause any deflection.

c. A charged balloon would also create an electric field, and if a stream of charged particles were to pass through this electric field, they would be deflected. The direction and amount of deflection would depend on the charge of the particles and the strength of the electric field created by the charged balloon.

To know more about water please refer: https://brainly.com/question/20791648

#SPJ4

During alpha decay, the atomic number of the radioactive isotope reduces by 2 unit and mass number decreases by four units. In beta decay, the mass number remains unchanged and the atomic number increases by one.

Heavy unstable radioactive isotopes undergoes nuclear decay through the emission of charged particles such as alpha or beta. In alpha decay, the radioactive isotope emits an alpha particle or helium nuclei.

consider the general equation for alpha decay:

[tex]\rm _{Z}^{A}X \rightarrow _{Z-2}^{A-4}X + _{2}^{4}He[/tex]

Hence, the mass number of the product reduces by 4 units and atomic number by 2 units.

In beta decay, one or more beta particles or an electron is emitted results in increase in atomic number by one unit and mass remains constant.

The general  nuclear reaction of beta decay is written as follows:

[tex]\rm _{Z}^{A}X \rightarrow _{Z +1}^{A}X + _{-1}^{0}e[/tex]

Find more on radioactive decay:

https://brainly.com/question/1770619

#SPJ1

That has been released and is associated with the body in motion.

define kinetic energy ?

In physics, an object's kinetic energy is the energy it has as a result of its motion. It is defined as the amount of work required to accelerate a body of a given mass from rest to a certain velocity. The body retains its kinetic energy after gaining it during acceleration until its speed changes. The body does the same amount of work while slowing down from its current pace to rest. Formally, kinetic energy is any term in a system's Lagrangian that contains a time derivative.

The kinetic energy of a non-rotating object of mass m moving at a speed v in classical physics

The primary distinction between kinetic energy and potential energy is that potential energy is mechanical energy that is stored within an object and is ready to be released as and when needed to do work, whereas kinetic energy is mechanical energy that has been released and is associated with the body in motion.

To learn more about kinetic energy follow the given link: https://brainly.com/question/8101588

#SPJ1

Cross-linking polymers not only increases the tensile strength of the polymer, but it also changes the polymer's elastic properties.

The term polymer is defined as any of a class of natural or synthetic material composed of very large molecules, called macromolecules, that are multiples of simpler chemical units called monomers.

Adding cross-links between polymer chains initially makes the polymer more elastic. The introduction of short chains of sulfur atoms that link the polymer chains in natural rubber, for example, results in the vulcanization of rubber. The polymer becomes more rigid as the number of cross-links increases.

Thus, Cross-linking polymers not only increases the tensile strength of the polymer, but it also changes the polymer's elastic properties.

To learn more about the polymer, follow the link;

https://brainly.com/question/17354715

#SPJ1

The ionic bond has a much higher quality than metallic bonds. As a result, more vitality is required to break the bonds between Al and O than between Al and Al. Pure aluminium ductility .

Pure aluminium is very ductile and has a high electrical conductivity. the difference between the atomic bond between those two are Pure aluminium is a metal with a metallic bond. It has a Face Centered Cubic crystal structure and can be moved to thin thwarts.Aluminium is also used in electrical connections and transmitters for high-pressure overhead transmission lines, as well as local wiring in electrical applications.

Alumina (Al2O3) Brittleness- In any case, its oxide Al2O3 (aluminium oxide, also known as alumina, corundum) has a trigonal structure, a melting point greater than 2000 °C, and it (Al2O3) is extremely refractive. Alumina blocks are used as heater linings in high-temperature applications.

Learn more about ionic bond here:

https://brainly.com/question/11527546

#SPJ4

According to the claim made, the maximum current it can produce for 65 hours is 2.84A.

Two electrodes are immersed in an atmosphere of sulfuric acid to form the lead-acid battery. The deleterious electrode is connected to a mesh of metallic lead, whereas the column . the column is constructed of metallic lead oxidation grains. Lead-acid batteries take longer to charge than lithium-ion batteries since the latter can handle higher current rates. This is essential for time-sensitive applications whereby vehicles are used more often and take fewer breaks. The amount of water inside the battery decreases as more of it is transformed into hydrogen.

Rating Given: 185 Ah

The maximum current for 65 hours will be I = 185Ah/65h I = 2.84 A.

To know more about Lead-acid battery visit:

https://brainly.com/question/29643320

#SPJ4

The skeletal structure of 3-methyl-2-hexanone, or 3-methylhexan-2-one, is drawn using the Draw Rings More C С O H. feature.

The skeletal formula of an organic compound, also known as the line-angle formula as well as shorthand formula, is a form of molecular structural formula which serves as just a shorthand representation of the a molecule's bonding as well as some details of the its molecular geometry.

The structure consists of a central carbon atom with two single bonds to two hydrogen atoms, a single bond to an oxygen atom, and another single bond to a carbon atom. This carbon atom has two single bonds to two hydrogen atoms and three single bonds to three other carbon atoms, each of which has two single bonds to two hydrogen atoms. This forms a six-carbon chain with one oxygen atom and eight hydrogen atoms.

To learn more about skeletal structure
https://brainly.com/question/28605306
#SPJ4

Because the electronegativity values of the nitrogen and oxygen atoms differ, the covalent bond N₂O is polar. They thus gave the atoms a partial charge.

An atom may establish bonds with other atoms in two main ways: covalent and ionic. The interaction of electrons over three or more atoms forms a covalent connection. When four or more ions join contact, they can create ionic bonds that are kept together by charging differences.

When precipitation occurs sugar, it breaks the covalent connections between the carbon, oxygen, and oxygens inside the molecule, but does not destroy the comparatively weak forces that hold the particular sugar molecules together.

To know more about Covalent bonds visit:

https://brainly.com/question/3447218

#SPJ4

Answer:

gas, liquid, solid

Any atom's atomic number is indicated to the left of its atomic symbol and is equal to the number of electrons in its nucleus. False: Any atom's atomic number is given as a subscript to the left of its atomic symbol and is equal to the number of electrons in its nucleus.

An atom is made up of a core negatively charged nucleus and one or more circling electrons. The positively charged, relatively large protons and neutrons that make up the nucleus could be present. But for the origin of the name "atom," we must look to 400 B.C. in ancient Greece. Greek philosopher Democritus proposed the usage of the word atomos, which meaning "uncuttable," in this sentence. Ultimately, he asserted, all matter may be reduced to singular, tiny particles called atomos.

An atom is made up of protons, neutrons, and electrons that orbit a core nucleus. Uranium splits into smaller atoms and creates new atoms during the fission process. There have been a tremendous number of atoms generated, as evidenced by the Big Bang and supernova events.

To know more Atoms visit:

https://brainly.com/question/13654549

#SPJ4

Explanation:

Abiotic factors such as rainfall, temperature, and soil conditions are the most responsible for the trend seen in the populations of large canopy trees and grass. Rainfall can affect the growth and survival of plants, and variations in temperature can influence the distribution of species. Soil conditions, such as nutrient levels and pH, can also play a role in determining which plants can thrive in a given area. Biotic factors, such as competition among plants and herbivory, can also influence the population trend of large canopy trees and grass, but these are typically driven by abiotic factors.

The trend seen in the populations of large canopy trees and grass is most likely due to abiotic factors, specifically changes in climate and temperature.

Large canopy trees typically require specific environmental conditions, such as adequate rainfall, humidity, and moderate temperatures, to thrive. As climate patterns shift and temperatures increase, these conditions may no longer be present in certain areas, which can result in a decline in the population of large canopy trees.

Similarly, grass populations are also influenced by changes in temperature and rainfall patterns. Grasses are adapted to grow in specific conditions, and as these conditions change, their populations can be impacted.

For example, prolonged drought conditions can lead to a decline in grass populations, while increased rainfall can promote growth.

While biotic factors such as competition between species and population dynamics can also influence the trend seen in the populations of large canopy trees and grass, abiotic factors are generally considered to be the primary drivers of these trends.

Find more on canopy trees:

https://brainly.com/question/1561206

#SPJ2

The difference in enthalpy of vaporisation between methane and water can be best explained by the fact that methane doesn't really exhibit formation of hydrogen bonds while water does.

Where can you find methane?

Major natural sources for methane include termite digestion, emissions through wetlands & oceans, and ocean currents. Rice production, garbage, raising of cattle as well as other ruminant animals (calf burps! ), and energy production are examples of sources associated with human activity.

What is the purpose of methane?

Unscented, colourless, and combustible, methane is a gas. It is mostly used as fuel to produce heat and light. It is also employed in the production of organic compounds. Methane is frequently found in wastes, marshes, septic tanks, and sewers and can be produced as natural materials decompose.

To know more about methane visit:

https://brainly.com/question/2127750

#SPJ4

The hybridization of the carbon atom in the Carbon-dioxide is d) sp

Hybridization is the phenomenon where two atomic orbitals combine to obtain a new degenerate hybrid orbital with the same energy level. Hybridization makes bond formation more stable than unhybridized orbitals. Molecular hybridization can predict the shape of a molecule. In sp-hybridization, s-orbitals and p-orbitals hybridize to form two sp-orbitals, each composed of 50% s-characters and 50% p-characters. This type of hybridization is necessary when an atom is surrounded by two electron groups. If a carbon atom is bound to two other atoms by two double bonds or one single and one triple bond, it can be in an sp hybridization state. When hybridized in the sp state, the molecule has a linear array of atoms with bond angles of 180°.

Learn more about hybridization in

https://brainly.com/question/14140731

#SPJ4

The solid is more soluble at higher temperatures is probably true for a solid solute with a highly endothermic heat ofsolution when dissolved in water. The correct option to this question is D.

The solubility of most solid or liquid solutes increases with increasing temperature. The components of mixtures can often be separated by fractional crystallization. It separates compounds according to their solubility.

When water is heated, the molecules gain energy and move faster. Because they move faster, they come into contact with sugar more often and dissolve faster.

As the temperature increases, the kinetic energy of the solvent particles increases, effectively breaking them apart. Dissolved particles are effectively held between solvent molecules, increasing solubility.

For more information on effect of temperature on solid kindly visit visit to

https://brainly.com/question/4353941

#SPJ4

participates in a chemical reaction by accepting an electron pair in order to bond to a nucleophile.

A nucleophile is a reactant which gives an electron pair to form a covalent bond. A nucleophile is usually charged negatively or is neutral with a lone couple of donatable electrons. H2O, -OMe or -OtBu are some examples. Overall, the electron-rich species is a nucleophile.

Electrophiles are electron deficient species and can accept an electron pair from electron rich species. Examples include carbocations and carbonyl compounds. A nucleophile is electron rich species and donates electron pairs to electron deficient species. Examples include carbanions, water , ammonia, cyanide ion etc.

To know more about nucleophile visit

https://brainly.com/question/28325919

#SPJ4

The formula for the oxidization of the iron hydroxide referring to is probably:

4 Fe + 3 O₂ + 6 H₂O -> 4 Fe(OH)₃

The oxidized substance is iron.

In this equation iron (Fe) is oxidized by oxygen (O2) in the presence of water (H2O). Iron loses electrons during the reaction and becomes the corrosion product iron hydroxide (Fe(OH)3). Oxygen molecules acquire electrons and become hydroxide ions (OH-).

Generally, in a redox reaction, the substance that donates electrons is oxidized and the substance that accepts electrons is reduced. In this case, iron is oxidized and oxygen is reduced. Iron is an essential element for all living organisms and is non-toxic. The average human contains about 4 grams of iron. Most of it is in hemoglobin in the blood.

Learn more about oxidization in

https://brainly.com/question/16976470

#SPJ4

"0.040 M SrBr2" is option (e). As all other alternatives have higher concentrations of common ions than Cu+ or Br-, the lowest concentration of Br- is 0.0100 M.

Explanation:

- The ordinary ion Br- has a higher concentration in 0.040 M solution, which in itself is 2 x 0.040 М = 0.080 M higher content than all the choices. Due to the common ion effect, which is caused by the presence of Ag+ or Br-, as AgBr's equilibrium shifts in a backward direction, the immersion of AgBr will decrease.

Among the following aqueous media would you anticipate to have AgCl's solubility to be the lowest?

Since water serves as the solvent over all instances, the maximum amount of Ag+ and Cl- AgCl may be the least sensitive of all the ions that can be precipitated in the BaCl2.

To know more ion about:

https://brainly.com/question/14982375

SPJ4

"0.040 M SrBr2" is option (e). As all other alternatives have higher concentrations of common ions than Cu+ or Br-, the lowest concentration of Br- is 0.0100 M.

Since water serves as the solvent over all instances, the maximum amount of Ag+ and Cl- AgCl may be the least sensitive of all the ions that can be precipitated in the BaCl2.

- The ordinary ion Br- has a higher concentration in 0.040 M solution, which in itself is 2 x 0.040 М = 0.080 M higher content than all the choices. Due to the common ion effect, which is caused by the presence of Ag+ or Br-, as AgBr's equilibrium shifts in a backward direction, the immersion of AgBr will decrease.

To know more ion about:

brainly.com/question/14982375

#SPJ4

This energy-level diagram could apply to molecules or ions a to e, which are H2, He2, H2+, He2+, and H2−.

When a quantum mechanical system as well as particle is bound—that is, spatially confined—it can only take on discrete values of energy known as energy levels. In contrast, classical particles can contain any amount of energy. The term is commonly used to refer to the energy levels of electrons in atoms, ions, or molecules that are bound by the nucleus's electric field, but it can also refer to nuclei's energy levels or vibrational as well as rotational energy levels in molecules. A system's energy spectrum with these kind of discrete energy levels is referred to as quantized.

The diagram is similar to that of NO and the bond order is three, with no unpaired electrons. If an electron is added to the system, the electron will be added to the bonding molecular orbital.

To learn more about energy-level
https://brainly.com/question/20561440
#SPJ4

A neutron makes a better nuclear bullet compared to a proton or an electron because it "has no electrical charge".

A neutron refers to a subatomic particle presented in the nucleus of every atom except that of simple hydrogen. The particle neutron derives its name from the fact that it carries no electrical charge. It means the neutron is neutral but is extremely dense.

In a comparison of a neutron with an electron and proton, it is obvious that a neutron makes a better nuclear bullet because a neutron carries no electrical charge.

You can learn more about neutron  at

https://brainly.com/question/26952570

#SPJ4

The half-reactions and balanced redox reaction for the specified voltaic cell are as follows: reduction half-reaction: 2Fe3+(aq)+2e2Fe2+(aq) E=0.77V.

The standard voltage gain is the prospective of the tank under uniform conditions (60 Cm for mixtures, 1 atm with gases, and pure crystals or liquids for many other elements) and a constant temperature (25 °C).

Due to the larger standard reduction potential of the silver half-cell, reduction will occur. The half-cell of tin will oxidize. The formula E0cell=E0red+E0oxid can be used to get the overall cell potential.

To know more about redox reaction visit :

https://brainly.com/question/13293425

#SPJ4

This yields a mass of 16.47 g of concentrated sulfuric acid.

Sulfuric acid, also known as oil of vitriol, is a strong mineral acid with the molecular formula H2SO4.

Volume of concentrated sulfuric acid needed = 5.00 L x (18.0 m / 10.0 m)

= 9.00 L

Mass of concentrated sulfuric acid needed = 9.00 L x 1.83 g/cm3

= 16.47 g

The volume of concentrated sulfuric acid needed to make 5.00 L of 10.0 m sulfuric acid can be calculated by multiplying the volume of the solution (5.00 L) by the molarity of the concentrated sulfuric acid (18.0 m) divided by the desired molarity of the solution (10.0 m). This yields a volume of 9.00 L of concentrated sulfuric acid. The mass of concentrated sulfuric acid needed can then be calculated by multiplying the volume of concentrated sulfuric acid (9.00 L) by the density of sulfuric acid (1.83 g/cm3). This yields a mass of 16.47 g of concentrated sulfuric acid.

To learn more about sulfuric acid
https://brainly.com/question/10220770
#SPJ4

Alkanes which are the hydrocarbons functional group contains only nonpolar covalent bonds.

Functional groups are collections of atoms that have a common pattern of chemical reactivity.

Alkane a hydrocarbon with no multiple bonds is an alkane

Characteristics: nonpolar

Geometry: tetrahedral (sp3 hybridized)

Reactivity: free radical reactions (e.g. free radical chlorination or bromination).

A hydrocarbon with at least one C–C double bond (π bond) is an alkene.

Characteristics: nonpolar. Molecule cannot rotate along double bond.

Geometry: trigonal planar (sp2 hybridized)

Reactivity: undergo addition reactions, as well as oxidative cleavage

Stability increases with increasing  of carbons attached.

A carbonyl (C=O) attached to a hydrogen and another carbon is an aldehyde Ethanal Propanal Butanal.

Examples: Benzaldehyde

Suffix: "-al" (if attached to ring: carbaldehyde) As a substituent: "oxo"

Characteristics: the C=O bond is somewhat polar

Reactivity: addition reactions (the carbonyl carbon reacts easily with nucleophiles)

To know more about functional group here

https://brainly.com/question/493841

#SPJ4

Indicators are substances whose solutions change colour when the pH fluctuates. These are what are known as acid-base markers.

A titration is a method for figuring out the concentration of the unknown by using a solution with known concentration. Until the reaction is finished, the titrant (the known solution) is typically supplied from a micropipette to a known volume of the sample (the unknown solution).

Due to differences in their emission spectra, chemical conjugate bases or acids of these relatively weak anion show a range of colours.

The pH indicator's colour is altered by the H+ ion's disintegration from the indication itself. Take note that pH indicators can also include mild acids and natural colours. The strong acidic biomarker dissociates, which causes the solution to take on a different colour.

Methyl orange and phenolphthalein are employed as markers. Methyl orange turns acidic solutions red, whereas basic solutions turn it yellow. In an acidic solution, phenolphthalein is colourless, but in a basic solution, it becomes pink.

To know more about Titrations visit:

https://brainly.com/question/186765

#SPJ4

3. Use trifluoroacetic acid as a remedy 4. Use isothiocyanate to treat 5. Use dinitrofluorobenzene as a treatment 6. Take the amino acid that has been derivatized.

The first amino acid's uncharged alpha amino group combines with phenyl isothiocyanate to generate an intermediary molecule during the Edman degradation process. An identified amino acid is now present in this intermediate protein molecule. Edman's Reagent, commonly known as phenylisothiocyanate (PITC), permits the progressive breakdown of a polypeptide chain's amino acids chain to provide initial structural data.

Edman's methodology required first uppercut ting the protein, as was the case with Sanger's approach, however this was accomplished using a chemical reagent as opposed to acids and enzymes. He utilized a reagent called

To know more about phenylthiohydantoin visit :

https://brainly.com/question/17562786

#SPJ4