65% of the reactant will be consumed in 23.3 seconds. If a first-order reaction has a rate constant of 0.0450 s'.
First order rate law is given by,
A = A0 × e-kt
Given,
A0 = Initial concentration=100 M
A = Final concentration=35 M (65% is consumed means 35% is the remaining compound)
K = Rate constant = 0.0450 s-1
A = A0×e-kt
=>35 = 100 × e-0.0450 * t
=>e-0.0450*t = 0.35
=> - 0.0450*t = ln(0.35)
=> -0.0450*t = -1.05
=> t = 23.3 sec
So, 23.3 seconds will be required to consume 65% of the reactant.
When a reaction's pace and reactant concentration are inversely correlated, the process is known as a first-order reaction. To put it another way, the response rate doubles when the concentration double. One or two reactants can be present in a first-order reaction, as in the case of the decomposition process.
Learn more about Reaction here:
https://brainly.com/question/28984750
#SPJ4
If an atom/ion has 3 protons, 4 neutrons and 4 electrons, is it a neutral atom or an ion? If it is an ion what is its charge?
The ion is a lithium ion with a charge of -1, often written as Li-.
What is an ion?
An ion is an atom or molecule that has a non-zero net electrical charge due to the loss or gain of one or more electrons. Ions can be positively charged (cations), when they lose electrons, or negatively charged (anions), when they gain electrons.
The number of protons in an atom/ion determines its atomic number and its identity.
In this case, the number of protons is 3, which corresponds to the element lithium (Li) in its neutral state. However, the number of electrons is 4, which means that this is an ion of lithium.
To determine the charge of the ion, we need to compare the number of protons (positive charges) to the number of electrons (negative charges). In this case, there are 3 protons (3+) and 4 electrons (4-), so the ion has a charge of -1.
Therefore, the ion is a lithium ion with a charge of -1, often written as Li-.
To learn more about ions:
https://brainly.com/question/13692734
#SPJ1
What is the role of catalysts in chemical reactions and how do they affect reaction rates?
Answer:
catalysts increase the rate of reaction
Explanation:
Answer:
Catalysts play a key role in chemical reactions by lowering the activation energy required for the reaction to occur. By doing so, catalysts increase the rate of reaction and can help make chemical reactions occur under milder conditions.
Explanation:
500.0 liters of a gas in a flexible-walled container are prepared at 0.9211 atm and.
200.0 °C. The gas is placed into a tank under high pressure. When the tank cools
to 20.0 °C, the pressure of the gas is 30.0 atm. What is the volume of the gas?
The volume of the gas at 20.0 °C when the pressure of the gas is 30.0 atm is 9.5 liters
How do I determine the volume of the gas?We'll begin by listing out the various parameters given from the question. This is given below:
Initial volume of gas (V₁) = 500.0 litersInitial pressure (P₁) = 0.9211 atmInitial temperature (T₁) = 200.0 °C = 200 + 273 = 473 KFinal temperature (T₂) = 20.0°C = 20 + 273 = 293 KFinal pressure (P₂) = 30.0 atmFinal volume of gas (V₂) = ?The final volume of the gas at 20.0 °C can be obtained by using the combined gas equation as shown below:
P₁V₁ / T₁ = P₂V₂ / T₂
(0.9211 × 500) / 473 = (30 × V₂) / 293
Cross multiply
473 × 30 × V₂ = 0.9211 × 500 × 293
Divide both side by 473 × 30
V₂ = (0.9211 × 500 × 293) / (473 × 30)
V₂ = 9.5 liters
Thus, it is evident from the above calculation that the volume of the gas is 9.5 liters
Learn more about volume:
https://brainly.com/question/14560487
#SPJ1
What is the major product of a reaction?
In chemistry, the term "major product" refers to the product of a chemical reaction that is formed in the highest yield
Meaning that it is produced in the greatest amount compared to other products that may also be formed in the reaction. The major product is often determined by considering the thermodynamics of the reaction, as well as the reaction kinetics and any other factors that may influence the distribution of products. The identity of the major product can be predicted based on the reaction conditions and the reactants involved, and is an important factor to consider in the design of chemical syntheses and the optimization of reaction conditions.
Learn more about chemical reaction here:
https://brainly.com/question/29762834
#SPJ4
What mass of sodium iodide (NaI) will react with 7.82 grams of chlorine?
16.49g sodium iodide (NaI) will react with 7.82 grams of chlorine.
Given, Mass of Chlorine gas = 7.82g
Mass of sodium iodide = ?
Let's find the number of moles of the given element:
Number of moles = mass/molar mass
Molar mass of Cl₂ = 2(35.5) = 71g/mol
Number of moles = 7.82/71 = 0.11mole
The given reaction equation is:
2NaI + Cl₂ → 2NaCl + I₂
Here, 2 mole of Cl₂ will react with 2 mole of NaI
Also, 0.11 mole of Cl₂ will also react with 0.11mole of NaI
Mass of sodium iodide = number of moles x molar mass
Molar mass of NaI = 23 + 126.9 = 149.9g/mol
Mass of sodium iodide = 0.11 x 149.9 = 16.49g
Read more about Mole Concept:
https://brainly.com/question/29367909
The complete question is -
What mass of sodium iodide (NaI) will react with 7.82 grams of chlorine? 2NaI + Cl₂ → 2NaCl + I₂ (given reaction equation).
Which type of plate boundary is the student modeling? Explain your answer.
The "convergent plate boundary" is the kind of plate boundary that the student is simulating.
What does word boundary mean?This zero-width check between two letters identifies a word boundary. A word character and a non-word letter must be present for the test to be successful. Each figure must appear on one side, regardless of which side they are on.
What are examples of word boundaries?For illustrate, the "three little pigs" went to the market. Indivisibility: Specify a statement and request that someone "add extra words" to it. This additional item will be entered between the words, not before or after them.
To know more about boundary visit:
brainly.com/question/29788117
#SPJ1
Work out the relative formula mass of Mg(OH)2.
Mg(OH)2's relative formula mass is 58.3.
What, using an example, is relative formula mass?The weighted average of the masses of the formula units on a scale where the mass of a carbon-12 atom is exactly 12 units is the relative formula mass of a substance. The "formula unit" is just the formula as it appears on paper, such as NaCl, CuSO4, 5H2O, CO2, or Cl2.
One Mg atom, two O atoms, and two H atoms make up the compound Mg(OH).
For Mg, O, and H, the atomic masses are:
Mg: 24.3
O: 16.0
H: 1.0
Mg(OH)2's relative formula mass is thus:
Relative formula mass of Mg(OH)2 = (1 x relative atomic mass of Mg) + (2 x relative atomic mass of O) + (2 x relative atomic mass of H)
= (1 x 24.3) + (2 x 16.0) + (2 x 1.0)
= 24.3 + 32.0 + 2.0
= 58.3
To know more about relative formula visit:-
https://brainly.com/question/13041813
#SPJ1
Assume you are working with an acutely toxic chemical
Administrative controls to consider when working with an acutely toxic chemical include:
1. Establishing and implementing safe operating procedures (SOPs).
2. Providing staff with appropriate safety training.
3. Establishing a clear chain of command and communication system to ensure staff are aware of any potential risks associated with the chemical.
4. Establishing a system for reporting any incidents, accidents, or other issues related to the chemical.
5. Ensuring adequate ventilation and other engineering controls for the chemical.
6. Monitoring the toxic chemical for any signs of contamination or degradation.
7. Restricting access to the chemical to only those with the appropriate safety training.
8. Implementing appropriate personal protective equipment (PPE).
9. Providing frequent safety inspections of working areas and equipment.
10. Implementing a system for disposing of the chemical in a safe manner.these are the administrative controls relevant for project.
learn more about toxic chemical Refer:brainly.com/question/21891087
#SPJ4
complete question:Assume you are working with an acutely toxic chemical; give all administrative controls relevant for your project.
Recall that your chambers had a set amount of
CO 2
entering each chamber and then you measured how much
CO 2
was exiting the chamber. Suppose you conducted your experiment and discovered one of your chambers had a lower in-flow of air relative to the other chambers. What would this do to your data in that chamber? It would not change the results. It would bias the results toward more respiration. It would bias the results toward less photosynthesis. It would bias the results toward more photosynthesis.
The results will be biased toward less photosynthesis if there is less carbon dioxide influx in one compartment than in the other chamber. The correct answer is C.
When the airflow in one chamber is less than the other chamber, less CO2 enters the chamber, resulting in a lower CO2 emission level from that chamber.
This may distort the data collected from this camera and lead to inaccurate measurements and conclusions. It is important to ensure that all chambers receive the same amount of air for accurate readings.
To avoid these errors it is important to ensure that all chambers are supplied with the same amount of air. This can be achieved by using the same flow rate for all chambers or by using a flow meter to measure and control the air flow entering each chamber. Consistent and controlled conditions allow researchers to obtain the accurate and reliable data needed to inform scientific conclusions.
The amount of CO2 entering one chamber is reduced when that chamber receives less outside air than the other chamber, resulting in a lower carbon dioxide emission level from that chamber. This can distort the data from that camera and lead to questionable observations and conclusions. It is important to ensure that the air entering each chamber is uniform in order to obtain accurate measurements. To avoid this mistake, it is important to ensure that the airflow to each chamber is uniform. This can be done in one of two ways: maintaining a constant flow rate within each chamber or using a flow meter to control and manage the airflow.
Complete Question:
Recall that your chambers had a set amount of CO 2 entering each chamber and then you measured how much CO 2 was exiting the chamber. Suppose you conducted your experiment and discovered one of your chambers had a lower in-flow of air relative to the other chambers. What would this do to your data in that chamber?
a. It would not change the results.
b. It would bias the results toward more respiration.
c. It would bias the results toward less photosynthesis.
d. It would bias the results toward more photosynthesis.
Learn more about Carbon Dioxide:
https://brainly.com/question/19885426
#SPJ4
What weather MOST LIKELY results when warm, wet air from the ocean hits cool, dry air over land?
A. decreased wind speeds
B. decreased precitation
C. thunderstorms
D. tsunamis
Answer:
thunderstorms
Explanation:
The collision of warm, moist air from the ocean with cool, dry air over land is a common weather pattern that can result in the formation of thunderstorms. When the two air masses meet, the warm, moist air rises rapidly and cools, condensing into clouds and eventually producing precipitation, such as rain or hail. The instability created by this collision of air masses also results in strong, gusty winds and lightning, which are characteristic of thunderstorms. Thunderstorms are most likely to occur in the late afternoon and evening, when the sun has had time to warm the land and create temperature differences between the two air masses.
Allen
What are the four main types of chemical reactions?
Answer:
synthesis, decomposition redox
Explanation:
Answer:
The four main types of chemical reactions are synthesis, decomposition, exchange (single replacement), and reduction-oxidation (redox).
Explanation:
which what-if analysis tool will allow you to set one cell to a certain value by changing one other cell?
The What -if analysis tool will allow you to set one cell to a certain value by changing one other cell is Goal Seek.
The process of basing your input value on an already established output value is known as "goal seeking." The technique involves applying a certain operator to a formula that can be computed using computer software.
The second method is to specify the desired result and ask Excel to determine what adjustments to the inputs would be necessary to make it happen. This is how the goal seek feature operates, and it can provide answers to queries like how many units of a product must be sold to achieve a specific profit level.
The benefits of what-if analysis in Excel include:
By changing the assumptions and tracking the results, an experimenter can produce more informed and precise results.
An experimenter can predict the results of the choice more precisely.
Learn more about What-if analysis tool:
https://brainly.com/question/27569172
#SPJ4
the 2,4-hexadienol and the maleic anhydride were readily observed using the uv light. explain why the product was only clearly observed after iodine staining (see example in diels-alder module on canvas).
The 2,4-hexadienol and the maleic anhydride were readily observed using the uv light, the product was only clearly observed after iodine staining as they were unsaturated products.
The 2,4-hexadienol and the maleic anhydride were readily observed using the uv light, the product was only clearly observed after iodine staining because as we know when product comes in contact with the iodine vapors, it reacts with the compounds and forms yellowish brown spots which can be easily seen.
Due to iodine, it forms complex with many organic compounds. we know iodine has affinity for both unsaturated and aromatic compounds, therefore both of them given compounds are unsaturated organic compounds along with the product.
Thats why, we know that when the 2,4-hexadienol and the maleic anhydride were readily observed using the uv light, the product was only clearly observed after iodine staining as they were unsaturated products.
To learn more about 2,4-hexadienol, click here:
brainly.com/question/29969319
#SPJ4
the ph of a certain weak acid solution with a concentration of 0.150 m is 2.535. what is the ka for this acid?
The Ka for the weak acid is 9.14 x 10^(-6).
Weak acid isA weak acid is an acid that only partially dissociates in water, and its strength is described by its acid dissociation constant (Ka).
To determine the Ka for the weak acid, we can use the relationship between the Ka and the pH of the solution:
Ka = 10^(-pH) * [HA]/[A-]
where [HA] is the concentration of the undissociated weak acid and [A-] is the concentration of the conjugate base.
From the given information, we know that the pH of the solution is 2.535. This means that:
[H+] = 10^(-pH) = 10^(-2.535) = 3.62 x 10^(-3) M
Since the acid is weak, we can assume that the concentration of the undissociated weak acid ([HA]) is approximately equal to the initial concentration of the acid (0.150 M).
Next, we can use the equation for the dissociation of the weak acid:
HA + H2O ⇌ H3O+ + A-
to write an expression for the equilibrium constant (Ka):
Ka = [H3O+][A-]/[HA]
We can use the fact that the solution is electrically neutral to write:
[H3O+] = [A-] + [OH-]
where [OH-] is the concentration of hydroxide ions.
Since the acid is weak, we can assume that the concentration of hydroxide ions is much smaller than the concentration of hydronium ions, so we can approximate:
[H3O+] ≈ [A-]
Substituting these expressions into the equation for Ka, we get:
Ka = [H3O+]^2 / [HA]
Plugging in the values we have calculated, we get:
Ka = (3.62 x 10^(-3))^2 / 0.150
Ka = 9.14 x 10^(-6)
Learn more about acid here:
https://brainly.com/question/14072179
#SPJ1
e-85 is an alternative fuel for automobiles and light trucks that consists of 85.0% (by volume) ethanol (c2h5oh), and 15.0% gasoline. when ethanol burns completely it produces co2 and h2o. the balanced equation for the burning of ethanol is
When ethanol burns completely it produces CO2 and H2O, 993.2 moles of CO2 are used.
Given that,
E-85 is an alternative fuel for automobiles and high trucks consisting of 85.0% Ethanol =15.0% gasoline.
C2H5OH+3O2----> 2CO2+3H2O
The density of ethanol = 0.790 g/mL
1 gallon = 3.785 L
therefore, 9 gallons = 9*3.785
=34.07 L
Volume of ethanol in 9 gallons=85% of 34.07 L.
=85/100*34.07
=28.96 L
Mass of ethanol = Volume * Density
=28.96 L*0.790 g/mL
=22878.49 g
Moles of ethanol= Mass/ molar mass
=22848.49/46.07 g/mol
=496.6 moles
Thus, the moles of CO2 produced = 2*496.6 = 993.2 moles of CO2.
To learn more about density check the link below:
https://brainly.com/question/1354972
#SPJ4
lithium hydroxide reacts with gaseous carbon dioxide to form solid lithium carbonate and liquid water. how many grams of carbon dioxide would react with 1.00 g of lithium hydroxide?
If lithium hydroxide reacts with gaseous carbon dioxide to form solid lithium carbonate and liquid water. then 0.915 g of carbon dioxide would react with 1.00 g of lithium hydroxide.
The balanced chemical formula for the reaction of carbon dioxide and lithium hydroxide is:
Li2CO3 + H2O = 2 LiOH + CO2.
According to the equation, which is balanced, two moles of LiOH and one mole of CO2 combine to form one mole of Li2CO3.
We must convert the mass of LiOH to moles in order to determine how much CO2 is needed to react with 1.00 g of LiOH. LiOH has a molar mass of:
Lithium's atomic mass is 6.94 and its atomic masses are 15.9994, 1.0079, and 23.95 g/mol respectively.
Hence, 1.00 g of LiOH equals:
1.00 g / 23.95 g/mol equals 0.0417 moles of LiOH
The balanced equation states that 2 moles of LiOH and 1 mole of CO2. The amount of moles of CO2 needed to react with 0.0417 mol of LiOH is therefore:
0.0208 mol CO2 = 0.0417 mol LiOH x (1 mol CO2 / 2 mol LiOH)
Lastly, we can use the molar mass of CO2 to convert the quantity of moles of CO2 to grammes, which is:
1 atomic mass of C plus 2 atomic masses of O equals 44.01 g/mol.
44.01 g/mol times 0.0208 mol CO2 equals 0.915 g CO2
Hence, 0.915 g of carbon dioxide and 1.00 g of lithium hydroxide would react.
Learn more about lithium hydroxide here:
https://brainly.com/question/2528161
#SPJ4
What is an example of emission spectra?
An emission spectrum is a spectrum of light emitted by a substance, such as a gas or a solid, that is excited by heating or some other form of energy input.
The light emitted by the substance is characteristic of its composition and atomic structure, and can be used to identify the substance and determine its chemical composition.
An example of an emission spectrum is the spectrum of light emitted by a hydrogen gas. When hydrogen gas is excited by an electric discharge, it emits light in the form of a series of bright lines, each with a characteristic wavelength. This series of bright lines is known as the hydrogen emission spectrum, and it is used to identify the presence of hydrogen in a sample and determine its concentration.
Another example of an emission spectrum is the spectrum of light emitted by a neon sign. When a high voltage is applied to a tube filled with neon gas, the gas emits a characteristic red light. This light is produced by the emission of photons from the excited neon atoms, and the spectrum of light emitted is unique to neon.
In conclusion, an emission spectrum is a spectrum of light emitted by a substance that is excited by heating or some other form of energy input, and it is used to identify the substance and determine its chemical composition.
Learn more about spectrum here:
https://brainly.com/question/3997802
#SPJ4
the molecular weight of hemoglobin is about 65,000 g/mol. hemoglobin contains 0.35% fe by mass. how many iron atoms are in a hemoglobin molecule?
there are approximately 4.069 x [tex]10^{23}[/tex] iron atoms in a hemoglobin molecule.
The number of iron atoms in a hemoglobin molecule can be calculated as follows:
First, determine the mass of iron in a single hemoglobin molecule:
mass of iron = 0.35% * 65,000 g/mol = 227.5 g/mol
Next, convert the mass of iron to the number of iron atoms by dividing by the atomic mass of iron:
1 iron atom = 55.845 g/mol
number of iron atoms = 227.5 g/mol / 55.845 g/mol/atom = 4.069 x [tex]10^{23}[/tex]iron atoms/mol
So there are approximately 4.069 x [tex]10^{23}[/tex] iron atoms in a single hemoglobin molecule.
To learn more about mass here:
https://brainly.com/question/17067547
#SPJ4
how to unclog a shower drain with baking soda and vinegar
Baking soda (sodium bicarbonate) is a kitchen staple that can do wonders for cleaning smelly or clogged clothes, appliances, and even drains. As a natural mineral compound, baking soda can dissolve mineral deposits and organic matter such as grease.
Procedure to unclog a shower drain with baking soda and vinegar:
1. Heating Boiling Water
Heat boiling water in a kettle on the stove or in a large flow-through measuring cup in the microwave.
2. Put boil water and Dish soap into drain:
Pour dish soap down the drain and carefully drain the boiling water. Dishwashing liquid can help clear up greasy blockages.
3. Pour Baking Soda Down the Drain
Pour one cup of baking soda down the drain. To do this, it is difficult to pour water directly into the drain using a measuring cup or funnel if the drain is small.
4. Pour in vinegar
Pour one cup of distilled white vinegar down the drain. Don't be surprised by the sound response that occurs. Baking soda is an alkali, whereas vinegar is a weak acetic acid. When they mix, they react rather dramatically, neutralizing each other. The hiss you hear is often a response to knocking on a blockage in the drain.
5. Rinse with plenty of hot water.
Wait 5 minutes when hissing stops. Use this time to boil two cups of water. Rinse the drain with this extra boiling water. If water is leaking from the drain, run hot tap water to flush the debris down the drain. If it doesn't merge, repeat the previous step.
Complete Question:
How To Unclog Drain With Baking Soda And Vinegar?
Learn more about Baking Soda:
https://brainly.com/question/29771586
#SPJ4
the initial concentration of a reactant in a first order reaction is 0.860 m. what will be its concentration after 4 half-lives have passed?
concentration of the reactant after 4 half-lives have passed will be 0.0538 M.
In a first-order reaction, the rate of the reaction is directly proportional to the concentration of the reactant. The formula to calculate the concentration of a reactant after a certain number of half-lives is:
C_final = C_initial * (1/2)^n
Where C_initial is the initial concentration, n is the number of half-lives, and C_final is the final concentration.
For a first-order reaction, the half-life is constant and can be calculated using the following formula:
t1/2 = 0.693/k
Where k is the rate constant.
If 4 half-lives have passed, the concentration of the reactant will be:
C_final = C_initial * (1/2)^n
C_final = 0.860 M * (1/2)^4
C_final = 0.0538 M
Therefore, the concentration of the reactant after 4 half-lives have passed will be 0.0538 M.
Learn more about first-order reactions here:
https://brainly.com/question/22685249
#SPJ4
the combustion of a hydrocarbon sample produced 0.1783 g of co2 and 0.0734 g of h2o. determine the empirical formula of the compound.
The empirical formula of the compound is CH2O.
The empirical formula of a compound is determined by dividing the mass of each element by its molar mass and then simplifying the resulting ratio to the smallest whole-number ratio.
The molar mass of CO2 is 44.01 g/mol.
Therefore, 0.1783 g of CO2 would be equivalent to 0.0040 mol CO2.
For H2O, the molar mass is 18.02 g/mol.
Therefore, 0.0734 g of H2O would be equivalent to 0.0041 mol H2O.
Therefore, the ratio of the elements would be 0.0040 mol CO2: 0.0041 mol H2O.
Simplifying this ratio to whole numbers yields 1 mol CO2: 1 mol H2O.
As a result, CH2O serves as the compound's empirical formula.
learn more about empirical formula Refer:brainly.com/question/14044066
#SPJ4
rhenium has an hcp crystal structure, a c/a ratio of 1.653, an atomic weight of 186.2g/mol, and a density of 21.0 g/cm^3 compute the atomic radius of re
The right response is (a) 0.0863 nm3. The equation V = a2c3/4 may be used to calculate the volume of the unit cell for rhenium.
The following formula may be used to get the volume of the unit cell for rhenium:
The height of the unit cell along the c-axis is given by the formula Volume of HCP unit cell = (3/2) x 3 x a2 x c.
Rhenium's atomic radius is 0.137 nm, hence 2 x 0.137 nm = 0.274 nm may be used to compute the length of one side of the hexagonal base (a).
Rhenium has a c/a ratio of 1.615, which means that c = 1.615a.
By replacing these values in the formula above, we obtain:
HCP unit cell volume is (3/2) x 3 x (0.274 nm)2 x (1.615 x 0.274 nm) = 0.0863 nm3.
As a result, option is chosen because the volume of the unit cell for rhenium is 0.0863 nm3 (a).
learn more about Rhenium here:
https://brainly.com/question/30185986
#SPJ4
The substances that participate in a reaction are called___, whereas that substance that form as a result of a reaction is called ____
The substances that participate in a reaction are called reactants, whereas the substance that forms as a result of a reaction is called a product.
Reactants are the starting materials that are involved in a chemical reaction, which undergo a transformation to form new substances. The reactants are typically shown on the left side of a chemical equation, with an arrow pointing to the right side, where the products are shown.
Products, on the other hand, are the new substances that are formed as a result of the chemical reaction. They are typically shown on the right side of a chemical equation, with an arrow pointing from the reactants on the left side.
Chemical reactions involve the breaking and formation of chemical bonds, which result in the rearrangement of atoms to form new substances with different chemical and physical properties than the reactants. The law of conservation of mass dictates that the total mass of the reactants must be equal to the total mass of the products in a chemical reaction.
Learn more about chemical reactions here:
https://brainly.com/question/9201475
#SPJ4
will increasing the partial pressure of the reactants increase the production of ammonia from nitrogen gas and hydrogen gas?
Yes, increasing the partial pressure of the reactants will increase the production of ammonia from nitrogen gas and hydrogen gas.
This is because the rate of the reaction is directly proportional to the partial pressures of both the reactants. As the partial pressure of the reactants increases, the rate of the reaction increases, and therefore more ammonia is produced. The reaction equation is as follows:
N2 + 3H2 → 2NH3
The equation: gives the rate of this reaction.
Rate = k[N2][H2]3
where k is a rate constant and [N2] and [H2] are the partial pressures of nitrogen gas and hydrogen gas, respectively.
learn more about hydrogen gas Refer:brainly.com/question/14355155
#SPJ4
Two students, Will N. Andable and Ben Pumpiniron, are in the weightlifting room. Will
lifts the 100 lb barbell over his head 10 times in one minute; Ben lifts the 100 lb pound
barbell over his head 10 times in 10 seconds. Which student does the most work? Which
student delivers the most power? Explain your answers.
Both students do the same amount of work since they lifted the barbell over their heads the same number of times.
Ben developed more power because he took less time to do the same amount of work.
What is the formula for calculating mechanical power?The formula for calculating mechanical power is given below as follows:
Power = force * distance/time taken
The power of each of the students is calculated as follows:
Assuming the work done by both students is approximated to the weight of the barbell, the power developed by each student will depend only on the time.
Power developed by Will:
Will lifts the 100 lb barbell over his head 10 times in one minute
Ben lifts the 100 lb pound barbell over his head 10 times in 10 seconds
The time taken by Ben to lift the 100 lb pound barbell over his head 10 times in 10 seconds is less than the time taken by Will to lift the 100 lb pound barbell over his head 10 times in 10 seconds, Hence, Ben developed more power.
Learn more about mechanical power at: https://brainly.com/question/24443465
#SPJ1
what type of bonding involves de-localized electrons?
Covalent bonding is a form of bonding that involves de-localized electrons. Two or more atoms share one or more pairs of electrons in covalent bonding to produce a more stable electron.
configuration. Delocalization occurs when the electrons involved in the bonding are not localized between two specific atoms but instead spread out over the entire molecule. Electron delocalization happens in molecules with pi bonds or aromatic systems. Pi bonds form when two p orbitals overlap sideways, allowing electrons to be shared over a greater region, whereas aromatic systems contain a ring of atoms that share electrons in a delocalized manner.Covalent bonding is a form of bonding that involves de-localized electrons. Two or more atoms share one or more pairs of electrons in covalent bonding to produce a more stable electron. Delocalized electrons are a common characteristic of many organic molecules.
learn more about electrons here:
https://brainly.com/question/1255220
#SPJ4
the temperature of a 5.50 l sample of nh3 gas is 22 oc. what will be the resulting temperature in kelvin if the volume is reduced to 3.40 l at constant pressure?
The temperature of a 5.50 L sample of NH₃ gas is 22 °C. The resulting temperature in kelvin if the volume is reduced to 3.40 l at the constant pressure is 286.6 K.
The initial temperature, T1 = 22 °C
The initial volume, V1 = 5.50 L
The final temperature , T2 = ?
The final volume , V2 = 3.40 L
The gas law is expressed as follows :
V1 /T1 = V2 / T2
5.50 / 22 = 3.40 / T2
0.25 = 3.40 / T2
T2 = 13.6 °C = 286.6 K
Thus, the final temperature of the gas is 13.6 °C IS 286.6 K.
To learn more about temperature here
https://brainly.com/question/14193123
#SPJ4
if a demineralizer bed reaches a point that the demineralizer resin can no longer hold any more ions, the bed is said to be
If a demineralizer bed reaches a point where the demineralizer resin can no longer hold any more ions, the bed is said to be exhausted.
Demineralizer beds are used in water treatment to remove dissolved minerals (e.g., calcium, magnesium, and iron) and other ionic impurities from water. Demineralizer beds typically consist of ions exchange resin beads that are packed into a column or tank. The resin beads have an affinity for certain ions (e.g., calcium and magnesium) and will exchange these ions for other ions (e.g., hydrogen or sodium) in the water. Over time, as the resin beads become saturated with exchanged ions, the capacity of the bed to remove further ions decreases.
When the resin becomes saturated and can no longer remove any more ions, the bed is considered to be exhausted. At this point, the resin must be regenerated or replaced in order to restore the demineralizer bed to its original capacity. The regeneration process involves washing the bed with a solution that displaces the exchanged ions and replaces them with fresh exchange ions. Once the regeneration process is complete, the demineralizer bed is ready to be used again to remove ions from the water.
learn more about exhausted here:
https://brainly.com/question/29848887
#SPJ4
Which requires less energy, recycling existing Al or extracting Al from Al2O3? Justify your answer with a calculation
Use math to support your response. 837.5 kJ are needed to produce 1.00 mol of aluminum from Al2O3. Recycling needs less energy since 26 kJ 837.5 kJ.
Recycling aluminum saves 95% more energy than manufacturing it from scratch. Additionally, 97% of the greenhouse gas emissions generated during primary production are avoided. Aluminum is created from bauxite, which is also recycled, saving 9 tonnes of CO2 emissions and 4 tonnes of bauxite production. Since aluminum can be recycled indefinitely and uses up to 95% less energy when recycled than when produced as primary aluminum, it reduces emissions, including greenhouse gas emissions. Nearly a billion tons, or over 75%, of the aluminum produced throughout history is still in use.
Learn more about aluminum here:
https://brainly.com/question/9496279
#SPJ4
what is the best description of a secondary active transport process that cotransports an amino acid with na ?
A secondary active transport process that cotransports an amino acid with Na+ is an example of a symport mechanism, in which both molecules move in the same direction across the cell membrane.
A secondary active transport process that cotransports an amino acid with Na+ is an example of a symport mechanism, in which both molecules move in the same direction across the cell membrane. Specifically, this type of transport involves the coupling of the energy stored in the electrochemical gradient of Na+ to the uphill transport of an amino acid against its concentration gradient. As Na+ flows down its concentration gradient into the cell, it drives the movement of the amino acid into the cell as well. This type of transport is known as secondary because it indirectly uses energy stored in the electrochemical gradient of Na+ to drive the movement of the amino acid, rather than directly using ATP hydrolysis like primary active transport mechanisms.
To learn more about cell membrane:
https://brainly.com/question/13524386
#SPJ4
