Answer:
15 oxygens
Explanation:
Given the partially balanced reaction: [tex]\text{C}_{\text{5}}\text{H}_{\text{10}}+\text{O}_{\text{2}} \rightarrow \text{5C} \text{O}_{2}}+\text{5H}_\text{2}\text{O}[/tex]
The subscripts (small number to the right of each element symbol) are the number of atoms of the element within each compound/molecule, and the coefficients (numbers in front of each compound) represent the number of that molecule involved in one full reaction (if the equation were balanced).
The product side of the reaction is on the right of the arrow.
To determine the total number of Oxygens on the product side, we need to identify how many Oxygens are in each molecule (the subscript on the Oxygen), and then multiply times the number of that molecule that would be involved (Coefficient of the compound containing Oxygen). There are multiple compounds on the right side of the equation that contain Oxygen, so we'll need to add together the number of Oxygens each part contributes.
[tex]\text{C}_{\text{5}}\text{H}_{\text{10}}+\text{O}_{\text{2}} \rightarrow \bold{5}\text{C} \bold{O_{2}}+\bold{5}\text{H}_\text{2}\bold{O}[/tex]
[tex]\text{\# reactant-side Oxygens}=\bold{5}\text{C} \bold{O_{2}}+\bold{5}\text{H}_\text{2}\bold{O}\\=5 \text{ CO}_{\text{2}}\text{ molecules} *\frac{\text{2 Oxygens}}{\text{1 CO}_{\text{2}}\text{ molecule}}+5 \text{ H}_{\text{2}}\text{O molecules} *\frac{1\text{ Oxygen}}{\text{1 H}_{\text{2}}\text{O molecule}}\\=10\text{ Oxygens}+5\text{ Oxygens}\\=15\text{ Oxygens}[/tex]
Which of the following is an example of a metamorphic rock?
Granite
Limestone
Marble
Pumice
Answer:
C
Explanation:
Marble is the correct answer
What quantity in moles of silver atoms do you have if you have 2.49 × 10²¹ atoms of silver. (The mass of one mole of silver is 107.87 g.)
Answer:
0.004136 moles
Explanation:
From our question we have been asked to determine the quantity in moles of silver atoms having 2.49 × 10²¹ atoms of silver.
We know that from Avogadro's constant, one mole of silver contains 6.02 x 10²³ atoms.
Thus,
1 mole of silver contains 6.02 x 10²³ atoms.
x moles of silver contains 2.49 × 10²¹ atoms
Cross multiply to obtain the number of moles of silver,
x moles = (2.49 × 10²¹ x 1)/(6.02 x 10²³)
= 0.004136 moles
Therefore the quantity of silver in moles is 0.004136 moles
I need help with this one bad
Explanation:
it applies to pressure laws
What are the rows of the periodic table called?
A. Periods
B. Elements
C. Atoms
D. Groups
Answer:
i believe its called A. periods
How many grams of glucose (C6H12O6) are contained in 555 mL of a 1.77 M glucose solution?
Identify if phosphorous is paramagnetic or diamagnetic and explain why.
Due to the presence of three unpaired electrons, phosphorus is paramagnetic.
Electronic configuration of Phosphorus:-
[Ne] 3S2 3P3
What determines if an element is paramagnetic or diamagnetic?
By looking at a substance's electron configuration, one can identify whether or not it has magnetic qualities. If a substance has unpaired electrons, it is paramagnetic; if all of its electrons are paired, it is diamagnetic.
Paramagnetic:-A tiny, positive susceptibility to magnetic fields exists in materials. When exposed to a magnetic field, these materials are only weakly drawn to it; once the external field is removed, they lose their magnetic qualities.
Diamagnetic:-A weak, negative sensitivity to magnetic fields exists in materials. When exposed to a magnetic field, diamagnetic materials are partially repulsed and lose their magnetic properties when the external field is removed.
To learn more about magnetic properties refer to :-
https://brainly.com/question/16961890
#SPJ10
The heat capacity of nickel is 0.444 J/(g · °C). Calculate the amount of heat needed to raise the temperature of 12 g of nickel from 23 °C to 69 °C. Now imagine those same joules were used instead to accelerate the same mass of nickel from rest. What would be the final speed, in m/s
Answer:245.088
Explanation: you subtract final temperature with initial temperature = 46 then multiply by grams = 552 then multiplied by J = 245.088
Na2 C6H6O7 (sodium hydrogen citrate)
Express the mass of sodium to three significant figures.
mNa =
The exact mass of one Na - atom is 22.98977 amu and thus, the weight of two sodium atoms in present in Na₂C₆H₆O₇ is 45.979539 g/mol.
What is Molar mass ?The molar mass of a substance is the mass in grams of 1 mole of the substance.
We can obtain a substance's molar mass by summing the molar masses of its component atoms.
Mass of one Na atom = 22.98977
Mass of two Na atom = 22.98977 x 2
= 45.97954
= 45.9 (up to 3 Significant figures)
Learn more about significant figure here ;
https://brainly.in/question/11059319
#SPJ1
light frequency 1.40x10^15 Hz strike a surface causing photoelectrons to leave with a KE of 1.05 eV what is the work function in eV
The work function is 4.74eV if light frequency [tex]1.40 X 10^{15}[/tex] Hz strike a surface causing photoelectrons to leave with a KE of 1.05 eV.
What are photoelectrons?When light whose frequency is more than the threshold frequency incident on the metal, electrons are emitted. Such electrons are called photoelectrons.
The photoelectric effect is a phenomenon in which a beam of light is projected towards a metal plate and this leads to the ejection of electrons from the metal. The minimum amount of energy required for this ejection of electrons is known as the work function. When the energy of the light beam is less than the work function, then the electrons are not emitted.
The photoelectric effect is represented by the equation:
E = φ + KE where
E = energy of the incident photons
KE = kinetic energy of photoelectrons
φ = Work function of the metal
This can also be written in terms of frequency as:
h = h₀ + [tex]\frac{1}{2}[/tex]mv²
h₀= frequency of the incident light beam
m = mass of the electron
v = velocity of the electron
h = Plank's constant 6.623 x 10⁻³⁴Js
Conversion factor: 1eV = 1.602 x 10⁻¹⁹ J
So, 1.05eV = 1.682 10⁻¹⁹ J
Using the formulas,
(6.623 x 10⁻³⁴Js)(1.40x10¹⁵ s⁻¹) = φ + 1.682 x 10⁻¹⁹ J
(9.272 x 10⁻¹⁹) - (1.682 x 10⁻¹⁹) = φ
φ = 7.590 x 10⁻¹⁹ J = 4.74 eV
Hence, the work function is 4.74eV if light frequency 1.40x10^15 Hz strike a surface causing photoelectrons to leave with a KE of 1.05 eV.
Learn more about work function here:
brainly.com/question/9757301
#SPJ1
pls this this solutions
How much heat (in joules) does it take to heat 180 g of water from 24 °C to 66 °C? The heat capacity of water is 4.184 J/(g · °C). You may round your answer to the nearest 100 J
Answer:31,631.04
Explanation: multiply final temp with initial temp = 42 then multiplied by grams = 7,560 then multiplied by J = 31,631.04
For the following reaction, 41.0 grams of sulfuric acid are allowed to react with 36.5 grams of zinc hydroxide. What is the maximum amount of zinc sulfate that can be formed? Mass = g What is the FORMULA for the limiting reactant? What amount of the excess reactant remains after the reaction is complete? Mass = g
The FORMULA for the limiting reagent is [tex]ZnOH_2[/tex].
4.27 grams of reactant remains after the reaction is complete.
What is a limiting reagent?The limiting reagent is the reactant that is completely used up in a reaction and thus determines when the reaction stops.
Given data:
Mass of sulfuric acid = 41.0 grams
Molar mass of sulfuric acid = 98.08 g/mol
Mass of zinc hydroxide = 36.5 grams
Molar mass of zinc hydroxide = 99.424 g/mol
Step 1:moles sulfuric acid = mass sulfuric acid / molar mass sulfuric acid
moles sulfuric acid = 41.0 grams / 98.08 g/mol
moles sulfuric acid = 0.41 moles
Step 2: moles of zinc hydroxide
moles zinc hydroxide = 36.5 grams / 99.424 g/mol
moles zinc hydroxide =0.367 moles
Step 3: Calculate limiting reactant
zinc hydroxide is the limiting reactant. It will completely be consumed.
There will remain 0.41 moles - 0.367 moles = 0.043 moles
This is 0.043 moles x 99.424 g/mol
= 4.27 grams
Learn more about the limiting reagent here:
https://brainly.com/question/14155328
#SPJ1
How does temperature affect Keq of a reaction
In an endothermic reaction, Keq increases as the temperature increases and vice versa.
In an exothermic reaction, Keq decreases as the temperature increases and vice versa.
Keq is the equilibrium constant of a reaction. The equilibrium constant is independent of the concentrations of the reactants and productsThe only factor that the equilibrium constant depends on is the temperature of the system of reactionIn an endothermic reaction, energy is gainedSo a higher temperature is more favourable in an endothermic reactionAs a result, more products are formed at a higher temperature, leading to a higher value of KeqIn an exothermic reaction, energy is releasedSo a lower temperature is more favourable in an exothermic reactionAs a result, fewer products are formed at a higher temperature, leading to a lower value of KeqTherefore, the temperature is the only factor that affects the equilibrium constant of a reaction.
Learn more about equilibrium constants here:
https://brainly.com/question/20344485
#SPJ10
One mole of hydrogen is burned in oxygen to produce water in the gas phase, H = 285.8 kJ. What is the energy change when 1 mole of water, in the gas phase, decomposes to form hydrogen and oxygen? a.142.9 kJ of heat is absorbed. b.285.8 kJ of heat is absorbed. c.142.9 kJ of heat is released. d.285.8 kJ of heat is released.
When One mole of hydrogen is burned in oxygen to produce water in the gas phase, 285.8 kJ of heat is released.Hence, option (D) is correct
What is Enthalpy change ?An enthalpy change is approximately equal to the difference between the energy used to break bonds in a chemical reaction and the energy gained by the formation of new chemical bonds in the reaction.
It describes the energy change of a system at constant pressure. Enthalpy change is denoted by ΔH.
The energy change that occurs when one mole of a compound is burnt in excess oxygen under standard bis called the standard enthalpy change of combustion.
Hence, When One mole of hydrogen is burned in oxygen to produce water in the gas phase, 285.8 kJ of heat is released.Thus, option (D) is correct
Learn more about enthalpy here ;
https://brainly.com/question/9444545
#SPJ1
What would be the mass, in grams, of 2.408 x 1024 molecules of tetraphosphorus decaoxide?
Answer:
1,135 grams P₄O₁₀
Explanation:
To find the mass, you need to (1) convert molecules to moles (via Avogadro's Number) and then (2) convert moles to grams (via molar mass from periodic table values). It is important to arrange the ratios/ conversions in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 4 sig figs to reflect the given value (2.408 x 10²⁴).
Avogadro's Number:
1 mole = 6.022 x 10²³ molecules
tetraphosphorus decaoxide = P₄O₁₀
Molar Mass (P₄O₁₀): 4(30.974 g/mol) + 10(15.998 g/mol)
Molar Mass (P₄O₁₀): 283.876 g/mol
2.408 x 10²⁴ molecules P₄O₁₀ 1 mole 283.876 g
------------------------------------------- x ------------------------------------ x -----------------
6.022 x 10²³ molecules 1 mole
= 1,135 grams P₄O₁₀
Which of the following is an insoluble compound that is likely to be produced by the reaction below?
CaSO4 + PbI _______
The following is an insoluble compound that is likely to be produced by the reaction below CaSO4 + PbI- CaI + PbSO4. The PbSO4 will be insoluble as The sulfates are insoluble in water besides for the sulfates of calcium, barium, mercury, and lead.
Why lead sulfate is insoluble in water?Lead sulphate ($PbS$) is insoluble in water due to the fact water's dipole electricity is simply too vulnerable to shy away the ions (each anion and cations) from the sturdy crystals of lead sulphate.Lead sulfate seems as a white crystalline solid. Insoluble in water and sinks in water. Contact might also additionally aggravate skin, eyes, and mucous membrane.
Thus, PbSO4 is insoluble. In PbSO4 , the electricity of the dipole is vulnerable to interrupting the anionic and cationic bond. So, PbSO4 stays insoluble in solution.
Read more about the sulfate:
https://brainly.com/question/19182330
#SPJ1
Calculate the mass of pure sodium chloride will yield enough hydrogen chloride gas to tralize 25 cm² of 0.5 M potassium trioxo- bonate(IV) solution. NACI=58.5, HC1 = 36.5, K,CO, = 138)
If the balloon had a volume of 3 L at a depth of 50 m, what was the original volume of the balloon it we assume the pressure at the surface of the water is 14.7 psi? Express your answer using one significant figure and include the appropriate units.
If the balloon had a volume of 3 L at a depth of 50 m, the original volume of the balloon will be
What is Significant figures ?Significant figures are the number of digits in a value, often a measurement, that contribute to the degree of accuracy of the value.
The pressure at a depth of 40 m is the hydrostatic pressure of the water plus the atmospheric pressure.
The hydrostatic pressure P of a liquid is given by the formula ;
P = ρgh
where,
ρ = the density of the liquid (Density of water = 1000 kg m⁻³)g = the acceleration due to gravity (9.81 ms⁻²)h = the depth of the liquid (Given : 50 m)P = 1000 kg m⁻³ x 9.81 ms⁻² x 50 m
= 1000 kg m⁻¹ x 9.81 s⁻² x 50
= 4.9 x 10⁵ Pa
Lets's Convert Pa in to atm
= 4.9 x 10⁵ Pa x 1 / 103. 325 x 10³ Pa
= 4.7 atm
Mow, lets calculate P(atm) ;
P(atm) = 14.7 psi x 1 atm / 14.7 psi
= 1 atm
Total Pressure at 50 m is ;
P(total) = 4.7 atm + 1 atm
= 5.7 atm
Now we can apply Boyle's Law to calculate the volume of the balloon at the surface.
P₁V₁ = P₂V₂
V₂ = P₁V₁ / P₂
According to the question ;
P₁ = 5.7 atm P₂ = 1 atmV₁ = 3 LV₂ = ?V₂ = 3 L x 5.7 atm / 1 atm
= 17.1 L
= 20 L ( 1 significant figure)
Learn more about Boyles law here ;
https://brainly.com/question/1437490
#SPJ1
How many xenon atoms are contained in 1.00 moles of xenon?
Answer:
6.022 x 10²³
Explanation:
The number of atoms = the number of moles x with the Avogadro's number.
(The Avogadro's number is 6.022 x 10²³ atoms / moles)
number of atoms = 1.00 moles x 6.022 x 10²³ atoms / mole
number of atoms = 6.022 x 10²³ atoms
(There is no need to simplify?) = 6.022 x 10²³
(ps. This is my first time doing this question so im sorry if i got it wrong
(つ﹏⊂)
Define voltaic ???!!!
A voltaic cell is used to produce electrical energy with the help of chemical reactions.
What is a voltaic cell?Relating to, or producing direct electric current by chemical action.
A Voltaic Cell (also known as a Galvanic Cell) is an electrochemical cell that uses spontaneous redox reactions to generate electricity. It consists of two separate half-cells.
Learn more about voltaic cells here:
https://brainly.com/question/861659
#SPJ1
What is the pH of a 0.640 M solution of C₅H₅NHBr (Kb of C₅H₅N is 1.7 × 10⁻⁹)?
The pH of a 0.64 M solution of pyridine (C₅H₅N) is 9.52.
What is pH ?A figure expressing the acidity or alkalinity of a solution on a logarithmic scale on which 7 is neutral, lower values are more acid and higher values more alkaline.
The equation for the protonation of the base pyridine is the following:
C₅H₅N + H₂O ⇄ C₅H₅NH⁺ + OH⁻ (1)
Kb = 1.7 × 10⁻⁹ (Given)
To calculate the pH of the solution we need to use the following equation:
pH + pOH = 14
pH = 14 - pOH
=14 - [-log[OH⁻]]
= 14 + log[OH⁻]
Now, we need to find the concentration of the OH⁻ ions. Since pyridine is a weak base, at the equilibrium we have (eq 1):
C₅H₅N + H₂O ⇄ C₅H₅NH⁺ + OH⁻
0.64 - x x x
After entering the values of [C₅H₅N] = 0.64-x, [C₅H₅NH⁺] = x, and [OH⁻] = x, into equation (2) we can find the concentration of OH⁻:
1.7 × 10⁻⁹ =[C₅H₅NH⁺] [OH⁻] / [C₅H₅N]
= x . x / 0.64-x
1.7 × 10⁻⁹ (0.64-x) - x² = 0
Solving the above quadratic equation for x, we have :
x₁ = -3.32 x 10⁻⁵x₂ = 3.32 x 10⁻⁵Now, We can calculate the pH, after taking the positive value, x₂, (concentrations cannot be negative) and entering into above equation :
pH = 14 + log[OH⁻]
= 14 + log (3.32 x 10⁻⁵)
= 9.52
Therefore, the pH of the solution of pyridine is 9.52.
Find more about pH here:
brainly.com/question/8834103?referrer=searchResults
#SPJ1
An unknown gas effuses at a rate of 2.0 times the rate of Cl₂. What is the molar mass of the unknown gas?
The molar mass of the unknown gas is determined as 17.75 g.
Rate of gas diffusionThe rate of gas diffusion is given by Graham's law.
R₁√M₁ = R₂√M₂
where;
R₁ is the rate of diffusion of the unknown gasM₁ is the molecular mass of the unknown gasR₂ is rate of diffusion of chlorine gasM₂ is the molecular mass of chlorine gas[tex]\frac{R_1}{R_2} = \sqrt{\frac{M_2}{M_1} } \\\\\frac{2R_2}{R_2} = \sqrt{\frac{71}{M_1} }\\\\2 = \sqrt{\frac{71}{M_1} }\\\\2^2 = \frac{71}{M_1} \\\\M_1 = \frac{71}{4} \\\\M_1 = 17.75 \ g[/tex]
Learn more about rate of diffusion here: https://brainly.com/question/11197959
#SPJ1
Imagine that a single cell below goes through four cell divisions. How many cells are produced? To find out, draw the parent cell and cells present after each division. Then write the number of cells in the space below each drawing. (Hint: the number of cells doubles with each division.)
16 cells are produced from a single parent cell after the fourth division of the cell.
What is a cell?In biology, the smallest unit can live on its own and that makes up all living organisms and the tissues of the body.
In mitosis type of cell division, one parent cell is divided into two same or different daughter cells. In this way, in the first division, two cells are produced from single parent cells and in the second division, four daughter cells are produced. In the third division, 8 cells are produced from 4 parent cells and in the fourth division, 16 cells are formed from 8 cells.
So we can conclude that 16 cells are produced from a single parent cell after the fourth division of the cell.
Learn more about cell here:
brainly.com/question/13123319
#SPJ1
If 6.34 g of CuNO, is dissolved in water to make a 0.720 M solution, what is the volume of the solution in milliliters?
V=n/M
V=(6.34:125.55 g/mol)/0.72
V=0.07 L = 70 ml
In a recent study, 50 males used a new weight-loss supplement, and 37 of them experienced weight loss after two weeks: In the same study, 20 females used
the same supplement, and 13 of them experienced weight loss after two weeks.
Fill in the blanks below to make the most reasonable statement possible.
The new weight-loss supplement was less effective on (Choose one) in the study. That is because only % of them lost
weight after two weeks, whereas % of the (Choose one) lost weight after two weeks.
Answer:
The new weight-loss supplement was less effective on females in the study. That is because only 65% of them lost weight after two weeks, whereas 74% of the males lost weight after two weeks.
Explanation:
37 out of 50 males lost weight after two weeks, so 74% of males lost weight ( (37 · 2)/(50 · 2) ). 13 out of 20 females lost weight after two weeks, so 65% of females lost weight ( (13 · 5)/(20 · 5) ). This means the supplement was less effective on females because males had a higher percentage of losing weight.
Hope this helps !! :D
M1 = 3M M2 = 1.25M V1 = V1=.125L unkown What is V2?
0.3 L is the final volume when M₁ = 3 M, V₁ = 0.125L, M₂ = 1.25M.
What is volume?The amount of space occupied by a three-dimensional figure as measured in cubic units.
Given data:
M₁ = 3 M
V₁ = 0.125L
M₂ = 1.25M
V₂ = ?
Solution:
M₁V₁ = M₂V₂
3 M × 0.125L = 1.25M × V₂
V₂ = 0.3 L
Hence, 0.3 L is the final volume.
Learn more about volume here:
https://brainly.com/question/15576659
#SPJ1
Determine the hybrid orbital of this molecule.
There are three sigma bonds, so hybridization of the molecule will be sp²
a 20.0mL sample of 0.15M hydrochloric acid (HCI) is needed to neutralize a 10.0mL sample of potassium hydroxide (KOH). what is the molarity of KOH solution?
Answer: .75 M
Explanation:
In the following half equation, which is the oxidizing agent? How & why?
NO3- (aq) + 4H+ (aq) + 3e- —> NO (g) + 2H2O
A) NO3-
B) H+
C) e-
D) NO
E) H2O
Answer: A
Explanation:
Oxidation is the process through which electrons are gained. This indicates that only organisms on the electron side have the potential to be oxidizing agents. c, d, and e are, by definition, eliminated.
We also know that H+ is in the +1 oxidation state. The same is true for 'H' in H2O... it doesn't change oxidation states
Therefore, the answer must be a) nitrate
can you please answer it I need it now
thanks.
Answer:
1. Thermometer– It is used to measure air temperature.
2. From time to time– In 2–4hrs after sunrise, the air temperature rises the fastest. Around 1hr before sun set, the air temperature drops the fastest. The solar radiation reaches its highest value at noon.
3. Anemometer– it is used to measure wind speed and direction.
4. Direction– The wind vane originally measures the direction of the wind, but, some modern ones have wind cups attached to them, to measure the wind speed.
5. Anemometer– It is a device that measures wind speed and direction. These, days, some modern wind vanes also measure wind speed.
Explanation:
I hope this helps.
