Answer:
Fe is the excess reactant
Reaction yields are the amount of the reactant and the products of a chemical reaction. In the reaction between iron and oxygen, iron is the excess agent.
What is excess reactant?The reactant present in an extra quantity than the other reactant in a chemical reaction which reacts with the limiting reactant is called an excess reactant.
In a reaction mixture, the excess reactant is present even when the limiting agent is completely consumed.
The chemical reaction between iron and oxygen is shown as,
[tex]\rm 4 Fe(s) + 3 O_{2}(g) \rightarrow 2 Fe_{2}O_{3}[/tex]
From the reaction, it can be said that oxygen is a limiting reagent that limits the formation of iron (iii) oxide.
Therefore, iron is an excess reactant.
Learn more about excess and limiting reagents here:
https://brainly.com/question/13285193
One night a student notices that one-quarter of the moon is visible. What is the likely explanation for this view?
If a student notices that one-quarter of the moon is visible, a lunar eclipse has taken place.
Eclipse is said to occur when one of the heavenly bodies casts a shadow on another heavenly body causing it to be partly visible or completely invisible. When the earth comes between the sun and the moon, a lunar eclipse is said to occur.
When a lunar eclipse occurs, the moon may be partly visible or completely invisible. Therefore, if a student notices that one-quarter of the moon is visible, a lunar eclipse has taken place.
Learn more: https://brainly.com/question/6505878
describe radioisotope
Answer:
It is an unstable form of a chemical element that releases radiation as it breaks down and becomes more stable.
1.An object that produces electrical energy through redox reactions is called ____________.
oxidation
reduction
galvanic/voltaic cell
2.Which species undergoes oxidation?
Pb
Cu
[tex] \huge \bf༆ Answer ༄[/tex]
Question : - 1
An object that produces electrical energy through redox reactions is called Galvanic cell
Question : - 2
Pb undergoes Oxidation
[tex]꧁ \: \large \frak{Eternal \: Being } \: ꧂[/tex]
My QUESTION
A car is travelling 35 miles per hour. How fast is it going when
measured in meters per minute?
Answer:
933.33 m/ min
Explanation:
1 mile = 1.6 km
So the car travels 1.6× 35 km in 1 hour
One hour has 60 minutes
So speed of car = 1.6×35 km / 60 minutes
1km = 1000 m
Speed = 1.6×35×1000 m/ 60 minutes
= 933.33 meters per minute
A car is traveling 35 miles per hour. The speed that is measured in meters per minute is 933.33 m/ min.
What is speed?Speed is the dimension of distance. It is calculated in meters per second. It is the rate of change of an object in a direction. Speed is calculated by dividing the distance by time. It is a scalar quantity.
Given, that a car is traveling 35 miles per hour. The speed is given, in miles we just have to convert the miles into meters per minute. Miles if the English unit of measurement and meter is the SI unit of measurement.
1 mile = 1.6 km
So the car travels 1.6× 35 km in 1 hour
One hour has 60 minutes
So speed of car = 1.6×35 km / 60 minutes
1km = 1000 m
Speed = 1.6 × 35 × 1000 m/ 60 minutes
= 933.33 meters per minute
Thus, the speed of the car is 933.33 m/ min.
To learn more about speed, refer to the link:
https://brainly.com/question/7359669
#SPJ2
Question 1(Multiple Choice Worth 50 points)
(01.06 LC)
Which technology removes carbon dioxide from the air by binding to it?
Answers-
O Pyrolization
O Direct-air capture
() Engineered molecules
O Carbon ground injection
Answer:
Direct-air capture
Explanation:
To understand the technology I'm about to explain, I'll model it to something familiar. As you know, the process of photosynthesis is where trees and plants use sunlight, water, and carbon dioxide to create energy for themselves, and release oxygen as a byproduct. Direct- air capture is exactly like this. Its pulls in air and then through a range of similiar chemical reactions, it extracts the carbon dioxide from it while returning the rest of the air to the surrounding environment. Except, the Direct-air capture does this at a much faster rate than nature does. The direct-air capture uses a ginormous fan that pulls air in which then passes over plastic surfaces that have potassium hydroxide solutions covered over them. The potassium hydroxide solution chemically binds with the carbon dioxide molecules, removing them from the air and trapping them in the liquid solution as a carbonate salt. The carbon dioxide is then contained where it is compressed and purified and then stored for later use.
9. Calculate the pOH and pH of a 0.35 M solution of the weak acid HCN.
Ka HCN = 4.8 x 10-10
Answer:
=0.35hcn20 4.7 x hcn(poh) =hcnty sa pointd
Converting from the US customary system to the metric system, 16 fluid ounces is approximately equal to a) 1 gallon. O b) 160 milliliters. c) 480 milliliters. O d) 960 milliliters.
Answer:
473 ml.
Explanation:
In gallons it’s equal to 0.125
Draw the skeletal structure of 3-octanethiol
found a picture hope this helps
What is the freezing point, in Celsius, of a sucrose-water solution containing 2.23g sucrose per 100g water. The molal freezing point depression constant for water is 1.86oC/m.
The freezing point of the solution is - 0.12 oC.
We know that;
ΔT = K m i
ΔT = Freezing point depression
K = Freezing constant
m = molality
i = Van't Hoff factor
Number of moles of sucrose= 2.23g/342 g/mol = 0.0065 moles
Mass of solvent in Kg = 0.1 Kg
Molality of the solution = 0.0065 moles/ 0.1 Kg = 0.065 m
Now;
ΔT = 1.86 oC/m × 0.065 m × 1
ΔT = 0.12 oC
Freezing point of pure water = 0 oC
Freezing point of solution = 0 oC - 0.12 oC = - 0.12 oC
Learn more: https://brainly.com/question/2292439
What identifies the number of protons in the nucleus of an atom?
Answer: Atomic number
Explanation:
I hope this helps you!
Draw the Lewis structure for C2H4 (whose skeletal structure is H2CCH2). Draw the molecule by placing atoms on the grid and connecting them with bonds. Include all lone pairs of electrons. - CHONSPFBrClIXMore
Answer:
This is a picture of it hope this helps!
The Lewis structure along with bonds for ethene (C₂H₄) is drawn below-
A Lewis Structure is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule.
The shared pairs of electrons are drawn as lines between atoms, while lone pairs of electrons are drawn as dots next to atoms.
They also display the total number of lone pairs present in each of the atoms that constitute the molecule.
Learn more about Lewis structure, here:
https://brainly.com/question/29603042
#SPJ6
Can someone help me out with this question and explain me the answer too!!! Please
Answer:
sorry i dont know
Explanation:
Disadvantage and advantage of iodine ?
- umoren sŭm..
THE ADVANTAGE OF IODIN
IODINE CAN LEAD TO GOITER AND OTHER THYROID PROBLEMS.THE DISADVANTAGE OF IODIN
IODIN MAY LEAD TO THYROIDITIS AND THYROID PAPILLARY CANCERTest I. Write the specialized body structures of the following animals that can enable them adapt in the land
1. snake
Answer: specialized body structures of Snakes
Explanation:
Snakes have many adaptations that allow them to move, hunt, eat and survive in their environments. Many animals have developed specific parts of the body adapted to survival in a certain environment. Among them are webbed feet, sharp claws, whiskers, sharp teeth, large beaks, wings, and hooves. In most aquatic animals, swimming is a must. To aid swimming, many animals have adapted and evolved with webbed feet.
In a constant-pressure calorimeter, 55.0 mL of 0.340 M Ba(OH), was added to 55.0 mL of 0.680 M HCI. The reaction caused the temperature of the solution to rise from 22.21 °C to 26.84 °C. If the solution has the same density and specific heat as water (1.00 g/mL and 4.184J/g • °C.) respectively), what is A4 for this reaction (per mole H,O produced)? Assume that the total volume is the sum of the individual volumes.
Answer:
Ba(OH)2 + 2 HCl → BaCl2 + 2 H2O
The reactants are present in equimolar amounts, so there is no excess or limiting reactants.
(0.0500 L) x (0.600 mol/L HCl) x (2 mol H2O / 2 mol HCl) = 0.0300 mol H2O
(4.184 J/g·°C) x (50.0 g + 50.0 g) x (25.82 - 21.73)°C = 1711.256 J
(1711.256 J) / (0.0300 mol H2O) = 57042 J/mol = 57.0 kJ/mol H2O
Explanation:
The melting point of H₂O(s) is 0 °C. Would you expect the melting point of H₂S(s) to be 85 °C, 0 °C or -85 °C.? Justify your choice
Answer:
-85 °C
Explanation:
O and S are in the same group( Group 16). Since S is below O it's atomic mass is higher than O. So molar mass of H2S is higher than H2O. The strength of Vanderwaal Interactions ( London dispersion forces) increases when the molar mass increases. However, only H2O can form H bonds with each other. This is because electronegativity of O is higher than S and therefore H in H2O has a higher partial positive charge than H of H2S.
H bond dominate among these 2 types of forces so the strength of attractions between molecules is higher in H2O than H2S. Therefore more energy should be supplied for H2O to break inter
molecular forces and convert from solid to liquid state than H2S. So mpt of H2O must be higher than that of H2S.
A stock solution containing Mn2 ions was prepared by dissolving 1.269 g pure manganese metal in nitric acid and diluting to a final volume of 2.000 L. The following solutions were then prepared by dilution: For solution A, 40.00 mL of stock solution was diluted to 1500.0 mL. For solution B, 10.00 mL of solution A was diluted to 250.0 mL. For solution C, 20.00 mL of solution B was diluted to 550.0 mL. a Calculate the concentration of the stock solution.
Answer:
B.
Explanation:
Hope this helpssss
<33
Help !
Student A uses 3N of force to move a cart 5 meters in 10 seconds. Student B uses 6N of force to move the same cart the same distance in 5 seconds. Which student did more work? Which student used more power? Use evidence and explain your answersss
Work = force x distance
Power = work/time
Work is said to be done if the force applied to a body causes the body to move through a distance.
Student B used more work and power
Workdone = Force * Distance
For student A:
Force = 3N
distance = 5meters
Time taken = 10 secs
Workdone by Student A = 3 * 5
Workdone by student A = 15Nm
Power used up = workdone/time
Power used up = 15/10
Power used up = 1.5 Watts
For student B:
Force = 6N
distance = 5meters
Time taken = 5 secs
Workdone by Student A = 6 * 5
Workdone by student A = 30Nm
Power used up = workdone/time
Power used up = 30/5
Power used up = 6 Watts
This shows that student B used more work and power
Learn more here: https://brainly.com/question/6701368
A reaction between solid sodium hydroxide and gaseous carbon dioxide produced solid sodium carbonate and liquid water. Write out a balanced equation for this reaction.
Balanced:
2NaOH + CO2 → Na₂CO₃ + H₂O
Explanation:
To balance an equation, the amount of atoms on each side must be equal.
Atom Count on Reactant Side:
Na = 1O = 3H = 1C = 1Atom Count On Product Side:
Na = 2C = 1O = 4H = 2As you see, to simply balance the equation, put the 2 in order for the atom count on the reactant side to be equal to the product side. The 2 will add one more of each atom so that its the same as the product side.
A 5.35 M sugar solution is diluted from 240.0 mL to 862.5 mL. What is the concentration of the dilute solution
Answer:
1.345.0
Explanation:
Hope this helpssss
a material that is not a mixture; has the same properties all the way through
Answer:
Explanation:
The material that is not a mixture; it has the same properties all the way through is called a substance. Thus the material that is not a mixture; it has the same properties all the way through is called a substance.
ALL THE BEST :)
Nail polish remover is something that girls just can't do without. Which of the following has been used as the active ingredient in nail polish remover?
limonene
acetone
methanol
ethanol
Answer:
Acetone has been used as the active ingredient in nail polish remover.
What is the SI unit of time?
OA.
second
OB.
minute
OC. hour
OD. day
Res
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
The correct choice is ~ A
S.I unit of time is Second
The Difference between the number of protons and electrons give an atom it’s _________.
Answer:
it gives an atom its charge
A pan containing 40 grams of water was allowed to cool from a temperature of 91.0 °C. If the amount of heat released is 1,300 joules, what is the approximate final temperature of the water? 74 °C 78 °C 81 °C 83 °C
Answer:
d. 83 °c
Explanation:
Answer:
D. 83 c
Explanation:
took the test
What instruments are used to measure moleculars vibration , rotation and translation?
Answer:
you hear
Explanation:
beautiful hear can be wonderful day in your life so to be rotations is not a big deal
Oxidation unit test
Please help ASAP!!!
Which statement correctly describes the oxidation number of the manganese atom (Mn) in Mnl2 and MnO2?
O Manganese has an oxidation number of +4 in Mnl2 and +2 in MnO2.
o Manganese has an oxidation number of +2 in Mnl2 and +4 in MnO2.
o Manganese has an oxidation number of +4 in both Mnl2 and MnO2.
Manganese has an oxidation number of +2 in both Mnl2 and MnO2.
In this case, according to the given information about the oxidation numbers and the compounds given, it turns out possible to figure out the oxidation number of manganese in both MnI2, manganese (II) iodide and MnO2, manganese (IV) oxide, by using the concept of charge balance.
Thus, we can define the oxidation state of iodine and oxygen as -1 and -2, respectively, since the former needs one electron to complete the octet and the latter, two of them.
Next, we can write the following [tex]x[/tex], since manganese has five oxidation states, and it is necessary to calculate the appropriate ones:
[tex]Mn^xI_2^-\\\\Mn ^xO_2^{-2}[/tex]
Next, we multiply each anion's oxidation number by the subscript, to obtain the following:
[tex]Mn^xI_2^-\rightarrow x-2=0;x=+2\\\\Mn ^xO_2^{-2}\rightarrow x-4=0;x=+4[/tex]
Thus, the correct choice is Manganese has an oxidation number of +2 in Mnl2 and +4 in MnO2.
Learn more:
https://brainly.com/question/15167411 https://brainly.com/question/6710925What is the use of GMO?
Some benefits of genetic engineering in agriculture are increased crop yields, reduced costs for food or drug production, reduced need for pesticides, enhanced nutrient composition and food quality, resistance to pests and disease, greater food security, and medical benefits to the world's growing population.
Insect resistance: Corn
Herbicide tolerance: Soybean
explain in details what a matter is...!!!
Answer:
umm
Explanation:
matter makes up everything. everything is matter
the more matter an object has the more mass It has
p-Nitrobenzaldehyde is more reactive toward nucleophilic additions than pmethoxybenzaldehyde. Explain
The presence of electron donating methoxy group in p-methoxybenzaldehyde , makes it less reactive towards nucleophilic additions.
Nucleophilic addition reactions that involve of p-Nitrobenzaldehyde and p-methoxybenzaldehyde both occur at the C=O functional group. The electron density around the carbonyl is a key factor that controls the reactivity of each compound.
In p-Nitrobenzaldehyde, the electron withdrawing nitro group decreases the electron density around the carbonyl making it more vulnerable to nucleophilic attack.
In p-methoxybenzaldehyde, the methoxy group donates electrons by resonance towards the carbonyl thereby increasing the electron density around it so that it is less reactive towards nucleophillic addition reaction.
The nucleophilic attack on p-Nitrobenzaldehyde leads to more resonance structures than nucleophilic attack on p-methoxybenzaldehyde.
Learn more: https://brainly.com/question/4699407
