"0.040 M SrBr2" is option (e). As all other alternatives have higher concentrations of common ions than Cu+ or Br-, the lowest concentration of Br- is 0.0100 M.
Explanation:
- The ordinary ion Br- has a higher concentration in 0.040 M solution, which in itself is 2 x 0.040 М = 0.080 M higher content than all the choices. Due to the common ion effect, which is caused by the presence of Ag+ or Br-, as AgBr's equilibrium shifts in a backward direction, the immersion of AgBr will decrease.
Among the following aqueous media would you anticipate to have AgCl's solubility to be the lowest?
Since water serves as the solvent over all instances, the maximum amount of Ag+ and Cl- AgCl may be the least sensitive of all the ions that can be precipitated in the BaCl2.
To know more ion about:
https://brainly.com/question/14982375
SPJ4
"0.040 M SrBr2" is option (e). As all other alternatives have higher concentrations of common ions than Cu+ or Br-, the lowest concentration of Br- is 0.0100 M.
Among the following aqueous media would you anticipate to have AgCl's solubility to be the lowest?Since water serves as the solvent over all instances, the maximum amount of Ag+ and Cl- AgCl may be the least sensitive of all the ions that can be precipitated in the BaCl2.
- The ordinary ion Br- has a higher concentration in 0.040 M solution, which in itself is 2 x 0.040 М = 0.080 M higher content than all the choices. Due to the common ion effect, which is caused by the presence of Ag+ or Br-, as AgBr's equilibrium shifts in a backward direction, the immersion of AgBr will decrease.
To know more ion about:
brainly.com/question/14982375
#SPJ4
what is the balanced chemical equation for the reaction of lead sulfide, pbs, with oxygen gas in order to form lead oxide and sulfur dioxide
The balanced chemical equation will be: PbS + O2 → PbO + SO2
Balanced chemical equations are essential for understanding and predicting chemical reactions. A balanced chemical equation is a way of representing a chemical reaction, showing the reactants and products, as well as the quantities of each.
The balanced chemical equation for the reaction of lead sulfide (PbS) with oxygen gas (O2) in order to form lead oxide (PbO) and sulfur dioxide (SO2) is:
PbS + O2 → PbO + SO2
This reaction occurs when the lead sulfide reacts with oxygen gas, resulting in two molecules of lead oxide and two molecules of sulfur dioxide.
The number of atoms of each element must be equal on both sides of the equation in order for the equation to be balanced.
Thus, two molecules of lead sulfide and three molecules of oxygen gas are required to produce two molecules of lead oxide and two molecules of sulfur dioxide.
To learn more about chemical, click here:
https://brainly.com/question/13145357
#SPJ4
(7) seven importance of chemistry in our everyday life
Answer:
Knowing chemistry can help you make decisions
Answer:
1 ) chemistry plays a role in the manufacturing of medicines
2 ) chemistry plays a role in the production of cosmetics
3 ) chemistry plays a role in the production of soaps and detergents
4 ) chemistry is used to manufacture construction materials
5 ) chemistry allows us to use fuels
6 ) chemistry is important in agriculture ( providing fertilizers ... )
7 ) chemistry is important in textiles
complete this table relating the values of E°cell and δG° to k K E°cel .δG° <1 =1 >1
The relationship between the reaction quotient, electrochemical cell potential, temperature, and standard cell potential is established by the Nernst equation formula. Ecell equals E0 less (RT/nF) lnQ.
What is Nernst equation?The Nernst equation, a chemical thermodynamical relationship, is used in electrochemistry to determine a reaction's reduction potential from the standard electrode potential. The Nernst equation relates an atom's or ion's ability to absorb one or more electrons (reduction potential) measured under any conditions to that measured under standard conditions (standard reduction potentials) of 298 K and one molar or one atmospheric pressure. The relationship between the reaction quotient, electrochemical cell potential, temperature, and standard cell potential is established by the Nernst equation formula. Ecell equals E0 less (RT/nF) lnQ. Under unusual circumstances, the potential of the electrochemical cells can be determined using the Nernst distribution law.
Here,
The solution and the table is in image.
The Nernst equation formula establishes a relationship between the reaction quotient, electrochemical cell potential, temperature, and the standard cell potential. Ecell = E0 – (RT/nF) lnQ.
To know more about Nernst equation,
https://brainly.com/question/13043546
#SPJ4
how much heat in kj is produced when 2.5 mol of fe3o4 reacts with excess al? 3 fe3o4(s) 8 al(s)
-6278 kJ of heat is produced when 2.5 mol of fe3o4 reacts with excess Al. For the equation 3 Fe3O4(s) + 8 Al(s) → 9 Fe(s) + 4 Al2O3(s).
The heat produced when 2.5 mol of Fe3O4 reacts with excess Al can be determined by using the balanced equation for the reaction and the appropriate enthalpy values.
The balanced equation for the reaction is:
3 Fe3O4(s) + 8 Al(s) → 9 Fe(s) + 4 Al2O3(s)
The enthalpy change for the reaction is the sum of the enthalpies of formation of the products minus the sum of the enthalpies of formation of the reactants. ΔH = [9(ΔHf of Fe(s)) + 4(ΔHf of Al2O3(s))] - [3(ΔHf of Fe3O4(s)) + 8(ΔHf of Al(s))]
Using the standard enthalpies of formation, ΔHf of Fe3O4=-824.2 kJ/mol, ΔHf of Fe=-44.1 kJ/mol, ΔHf of Al2O3=-1675.9 kJ/mol, ΔHf of Al=-1675.9 kJ/mol
ΔH = [9(-44.1 kJ/mol) + 4(-1675.9 kJ/mol)] - [3(-824.2 kJ/mol) + 8(-1675.9 kJ/mol)]
ΔH = -2511.2 kJ/mol
Therefore, the heat produced when 2.5 mol of Fe3O4 reacts with excess Al is -2511.2 kJ/mol * 2.5 mol = -6278 kJ
To know more about mol please refer: https://brainly.com/question/24191779
#SPJ4
a piece of copper is heated from 25. c to 36.4 c. it absored 325 joules of heat ernergy in this process. determind the mass of the piece of copper. copper has a speicfic heat of 0.387
A chunk of copper with a mass pf 95.4 g will increase in temperature from 25 °C to 48 °C when exposed to 849 J of heat.
What is the relationship between temperature and heat?This formula explains how a substance's ability to absorb heat and its subsequent change in temperature are related to one another. In your case, you are conscious that a sample of iron weighing 95.4 g heats up from 25 to 48 C after absorbing 849 J of heat.
In what ways do copper & oxygen interact?Copper, much like most metallic elements, only reacts with oxygen from the air. When heated, a layer of black copper oxide forms on it: This experiment could be used as an illustration.
To know more about copper visit:
https://brainly.com/question/13677872
#SPJ4
What is the IUPAC name for this compound? онa. cyclopentanolb. cyclohexanol c. cyclobenzenol d. phenol e. glycerol
The IUPAC name is e. glycerol.
The IUPAC nomenclature is based on naming the longest chain of carbons connected by single bonds in a molecule, whether it is a continuous chain or a ring. All deviations, whether multiple bonds or atoms other than carbon and hydrogen, are denoted by prefixes or suffixes based on a set of priorities. The International Union of Pure and Applied Chemistry (IUPAC) is a global organization that represents chemistry as well as related sciences and technologies. The International Union of Pure and Applied Chemistry is defined as IUPAC. It is the world's leading authority on chemical nomenclature and terminology. Thus, IUPAC nomenclature is essentially a method of naming organic compounds using specific rules.
Learn more about IUPAC here;
https://brainly.com/question/30086566
#SPJ4
In a reaction mixture containing only reactants, what is the value of Q?
a. -1
b. 1
c.
[infinity]
d. 0
e. It cannot be determined without concentrations
The value of Q in a reaction mixture containing just reactants is 0. Thus, the correct answer is D.
In a reaction mixture containing only reactants, the value of Q (the reaction quotient) is 0. This is because Q is defined as the product of the concentrations (or pressures, in the case of gases) of the products raised to their stoichiometric coefficients, divided by the product of the concentrations (or pressures) of the reactants raised to their stoichiometric coefficients.
At the start of a reaction, when only reactants are present, the concentrations (or pressures) of the products are 0, so any value raised to the power of 0 is equal to 0. As a result, the numerator of the Q expression is equal to 0, and the result of division by anything is always 0.
Learn more about reaction mixture here: brainly.com/question/28381849
#SPJ4
Consider this reaction occurring at 298 K: BaCO3(s) ⇌ BaO(s) + CO2(g)Substance ∆rH o / kJ mol–1 ∆rS o / J mol–1 K –1 BaCO3(s) –1213.0 112.1 BaO(s) –548.0 72.1 CO2(g) –393.5 213.8a. Using the information in the table above, show that the reaction is not spontaneous under standard conditions by calculating ∆rG o . {5 marks}b. If BaCO3 is placed in an evacuated flask, what partial pressure of CO2 will be present when the reaction reaches equilibrium? {3 marks}c. Can the reaction be made more spontaneous by an increase or decrease in temperature? If so, what temperature is required to make the reaction spontaneous under standard conditions? {3 marks}d. What temperature is required to produce a carbon dioxide partial pressure of 1.5 bar? {3 marks}
-1398.7 kJ/mol is ∆rG o is negative, the reaction is not spontaneous under standard conditions for given reaction.
What is equilibrium?Equilibrium is a state of balance in which all forces and influences are equal. It is a state of rest or balance due to the equal action of opposing forces. In economics, equilibrium is a state in which the market price of a good or service is stable and no tendency to change. This occurs when there is no excess demand or supply, and all participants in the market have perfect information.
a. ∆rG o = ∆rH o - T∆rS o
∆rG o = -1213.0 kJ/mol - (298 K)(112.1 J/mol K) = -1398.7 kJ/mol
b. When the reaction reaches equilibrium, the partial pressure of CO2 will be equal to zero, as the reaction is not spontaneous under standard conditions, and therefore no CO2 will be produced.
c. The reaction can be made more spontaneous by decreasing the temperature. The temperature required to make the reaction spontaneous under standard conditions can be calculated by setting ∆rG o to zero and solving for T.
d. To produce a carbon dioxide partial pressure of 1.5 bar, the reaction must be forced to proceed in the reverse direction, i.e the reaction must be made non spontaneous.The increase in temperature is necessary to do this. We can use the equation ∆rG o = ∆rH o - T∆rS o and plug in the values of ∆H o, ∆S o and P to solve for T.
To know more about equilibrium click-
brainly.com/question/19340344
#SPJ4
how are atoms in a molecule held together? responses through shared electrons through shared electrons through shared neutrons through shared neutrons through shared energy through shared energy through shared protons
A molecule's atoms are held together by shared electrons. This is known as a covalent bond. In a covalent bond, atoms share one or more electrons in order to fill their outermost electron shell, also known as valence shell.
This forms a stable electron configuration and creates a bond between the atoms. The sharing of electrons creates an electrostatic attraction between the positively charged nucleus of one atom and the negatively charged electrons of another atom. This attraction creates the chemical bond that holds the atoms together in a molecule.A neutron is a subatomic particle that is found in the nucleus of an atom. It has no electric charge and a slightly larger mass than a proton.
Learn more about atom here:
https://brainly.com/question/1566330
#SPJ4
The mass ratio of sodium to fluorine in sodium fluoride is 1. 21:1. A sample of sodium fluorideproduces 28. 8 g of sodium upon decomposition. How much fluorine (in grams) forms?
The premise behind this problem is that if the thermal decomposition also yields 34.5 g of sodium, you must utilise the stated mass ratio to calculate how much fluoride will be produced.
What the body does with sodium?
Sodium is a vital component that the body needs in very tiny amounts to keep bodily fluids in balance, keep nerves and muscles functioning properly, and to prevent excessive perspiration. The majority of Americans consume too much of it, and they might not even be aware of it.
What are sodium's five uses?
5Uses. Titanium, sodamide, sodium cyanide, sodium peroxide, & sodium hydride are all made from sodium. Nuclear reactors have used liquid sodium as a coolant in the past. Streetlights use sodium vapour, which emits a dazzling yellow light.
To know more about sodium visit:
https://brainly.com/question/29327783
#SPJ4
Question 4 Status: Not yet answered I Points possible: 2.00 Determine the correct answers to the problems below and round to the required number of significant figures. Enter your answer in standard notation. 0.004911/3.87 = 4 x 6 =
The answer is 24, and it does not need to be rounded as it's already in standard notation.
The first problem is 0.004911/3.87 = 0.001268. So the answer should be 0.00127. The second problem is 4 x 6 = 24. Standard notation is a way of writing numbers in a standardized format. It involves writing numbers in a way that includes a number, a decimal point, and a set of digits to the right of the decimal point. The number of digits to the right of the decimal point represents the precision of the number. In scientific notation, numbers are written as a coefficient multiplied by a power of 10.
Learn more about standard notation here:
https://brainly.com/question/10253124
#SPJ4
isopentylamine has two n-h peaks while n-butylacetamide has only one n-h peak. why?
Isopentylamine Hydrochloride. Purity: >98.0%(T). Synonyms: 3-Methylbutan-1-amine
Why it Happens ?Isopropylamine undergoes the same reactions as other simple alkyl amines, such as protonation, alkylation, acylation, and condensation with carbonyls. Isopropylamine, like other simple aliphatic amines, has a low pKa: [(CH3)2)CHNH3]+ has a pKa of 10.63.
Many herbicides and pesticides, including atrazine, bentazon, glyphosate, imazapyr, ametryne, desmetryn, prometryn, pramitol, dipropetryn, propazine, fenamiphos, and iprodione, include isopropylamine as a building block.It is a plastic regulating agent, an intermediary in the organic synthesis of coating materials, plastics, insecticides, rubber chemicals, medicines, and other chemicals, and an additive in the petroleum sector.
To learn more about n-h peaks to refer:
https://brainly.com/question/3536488
#SPJ4
true/false. The lag of the maximum is exhibited when: the maximum temperature during a year does not occur until autumn. the highest levels of solar radiation are not received until late afternoon. the warmest annual mean temperature occurs in the year following maximum CO2 emissions. the maximum temperature for the day occurs several hours after maximum solar radiation receipt.
The highest temperature during the day occurs many hours after the maximum solar radiation receipt, which illustrates the greatest lag.
Where in India is the temperature the highest?
Sri Gangapur. This city, located at an altitude of 178 metres in Jaipur, the largest state in the nation, has India's highest temperature. The highest temperature ever measured there was 50 degrees Celsius.
What's the maximum temperature a person can withstand?
Death will almost likely occur at 46 °C (111.2 °F) or higher, but people have been reported to live up to 43 °C (115.7 °F). Normal death occurs at 43 °C (109.4 °F), but there is also a chance of major brain injury, ongoing convulsions, and shock.
To know more about maximum temperature visit:
https://brainly.com/question/16992351
#SPJ4
What is the Celsius temperature of 100.0 g of chlorine gas in a 35.0 L container at 800 mmHg?
a. 159 ∘C
b. 46 ∘C
c. 318 ∘C
d. -114 ∘C
100.0 g liquid chlorine gas at 800 mmHg has a temperature of 46 C in a 35.0 L container.
Chlorine gas toxicity: how toxic is it?Low levels of chlorine exposure (between 1 and 10 ppm) might irritate the eyes, nose, and throat and make you cough and painful. Acute respiratory discomfort with airway constriction that fluid buildup in the lungs can quickly result from breathing in chlorine gas at higher quantities (>15 ppm).
Is chlorine gas safe to breathe?Pulmonary edema, a condition brought on by inhaling a lot of chlorine, is a fluid buildup in the lungs. For a number of hours following chlorine exposure, the onset of pulmonary congestion may be postponed. The skin and eyes may freeze when exposed to compressed liquid chlorine.
To know more about chlorine gas visit:
https://brainly.com/question/13123721
#SPJ4
a drop taken from the top of a mixture of salt and water will jot be identical to a drop taken from the bottom of the mixture
Answer:
Water molecules pull the sodium and chloride ions apart, breaking the ionic bond that held them together. After the salt compounds are pulled apart, the sodium and chloride atoms are surrounded by water molecules, as this diagram shows. Once this happens, the salt is dissolved, resulting in a homogeneous solution.
Explanation:
Each of the following reactions is catalyzed by an enzyme. For each reaction, classify the enzyme according to one of the six main classes suggested by the International Union of Biochemistry.
The first reaction is,
Each of the following reactions is catalyzed by an enzyme. For each reaction, classify the enzyme according to one of the six main classes suggested by the International Union of Biochemistry.
(Image attached to the end of the solution)
in first reaction HYDROLASE enzyme as clearly, it is a hydrolysis reaction
in 2nd reaction OXIDOREDUCTASE is the answer as it is a reduction reaction
Reduction, any of a class of chemical reactions in which the number of electrons associated with an atom or a group of atoms is increased. The electrons taken up by the substance reduced are supplied by another substance, which is thereby oxidized.
REDUCTION can be identified as:
* Removal of oxygen
* Addition of hydrogen
* Decrease in valency of metal ion[tex](e.g.[/tex] [tex]$\mathrm{Fe}+2$[/tex][tex]? $\mathrm{Fe}+3)$[/tex]
and the last one is clearly isomers of each other hence ISOMERASE.
For more such question on Catalyzed enzyme:
https://brainly.com/question/27950063
#SPJ4
the most stable form of nitrogen is n2, where nitrogen atoms are triple bonded together. however, phosphorus and arsenic prefer to form tetrahedral p4 and as4 clusters or long chains/lattices. explain this difference in bonding using periodic trends.
Periodic trends affect bonding, because of how the elements are arranged on the periodic table. Bond forming between two elements depends on electronegativities of the elements.
How can you tell whether two atoms will bond?Their total quantity of valence electrons is what decides whether or not two atoms will join together to create a molecule. The electrons known as valence electrons orbit at the atom's highest possible energy level. The majority of atoms require eight valence electrons to be stable and unreactive.
How may bonds be arranged in ascending polarity?We can determine if a given bond will be non-polar, polar covalent, or ionic using the Electronegativity. The bond is more polar the bigger the difference in electronegativity. The polarity of the following bonds should be in ascending order: H-H, O-H, Cl-H, S-H, and F-H.
learn more about periodic trend here:
brainly.com/question/30100573
#SPJ4
35 ml of a hydrochloric acid solution is titrated with 0.100 m naoh. if it takes 11.22 ml to reach the endpoint of the titration, what was the concentration of the acid solution?
The concentration of the acid solution At the 0 mL =2.79 35 ml of a hydrochloric acid solution is titrated with 0.100 m naoh.
What is the hydrochloric acid used for?Hydrochloric acid (HCl) is commonly used for the neutralization of alkaline agents, as a bleaching agent, in food, textile, metal, and rubber industries. It is neutralized if released into the soil and it rapidly hydrolyzes when exposed to water.
What does hydrochloric acid do to human skin?Skin exposure to low concentrations of hydrogen chloride gas or hydrochloric acid causes erythema and inflammation of the skin whereas high concentrations can cause severe chemical burns to the skin and mucous membranes.
To know more about hydrochloric visit
https://brainly.com/question/18861540
#SPJ4
the smallest representative unit of an ionic compound is called a ?
The lowest representational unit for an ionic compound is a formula unit.
What does a chemical representative unit mean?The smallest unit in which a substance naturally exists is called a representative particle. The atom is the representative particle for most elements. The atom is the representative particle for most elements. Iron, carbon, and helium are made up of individual iron, carbon, and helium atoms.
What are atoms smaller than?Subatomic is defined as "less than an atom." Protons, neutrons, and electrons make up atoms. Even smaller particles known as quarks are the building blocks of protons and neutrons. Physicists believe quarks are elementary particles based on the evidence that is currently available.
To learn more about ionic compound visit:
brainly.com/question/29005103
#SPJ4
If you do a lab that burns Magnesium in pure Oxygen what would the empirical formula of the compound be if you started with 0.6 g Magnesium and 0.4 g of Oxygen?
a. MgO
b. Mg2O2
c. Mg2O3
d. Mg3O2
The empirical formula of the compound is option a.) MgO
The empirical formula of a compound represents the smallest whole number ratio of atoms in a molecule of that compound.
To determine the empirical formula, we need to know the number of moles of each element present in the compound. We can calculate the number of moles by dividing the mass of each element by its molar mass.
Magnesium (Mg) has a molar mass of 24.31 g/mol
Oxygen (O) has a molar mass of 16.00 g/mol
Given that we have 0.6 g of Magnesium and 0.4 g of Oxygen, we can calculate the number of moles of each element as follows:
Magnesium: 0.6 g / 24.31 g/mol = 0.02466 mol
Oxygen: 0.4 g / 16.00 g/mol = 0.025 mol
Now we can find the ratio of atoms of each element in the compound. In order to do that, we divide the number of moles of each element by the smallest number of moles.
Magnesium: 0.02466 mol / 0.02466 mol = 1
Oxygen: 0.025 mol / 0.02466 mol = 1.01
The numbers obtained are not whole numbers, but they are very close to 1, which means the ratio of atoms is close to the ratio of moles, and the empirical formula of the compound is MgO.
Therefore the answer is (a) MgO.
Learn more about Empirical Formula here: https://brainly.com/question/14044066
#SPJ4
Choose the correct chemical structure of a dinucleotide composed of AA and GG and the dinucleotide composed of TT and CC in an antiparallel fashion to the previous structure. Take into account the possible hydrogen bonds.
Figure (1) is erroneous because adenine (A) is triple hydrogen bonded to thymine (T), whereas guanine (G) and cytosine (C) are double hydrogen bonds. Figure (2) is valid since both base pairs are arranged correctly.
In nucleic acids, purine bases form hydrogen bonds with pyrimidine bases in a precise way known as base pairing. Adenine forms double hydrogen bonds with thymine. Cytosine forms triple hydrogen bonds with guanine. A dinucleotide is now a nucleotide compound made up of two nucleotides. As a result, each nucleotide unit is made up with one nucleobase, one pentose moiety, as well as phosphoric acid. Nucleotides are organic compounds made up of a nucleoside as well as a phosphate.
They function as monomeric units of a nucleic acid polymers deoxyribonucleic acid (DNA) & ribonucleic acid (RNA), both of which are crucial macromolecules for all life on Earth. Nucleotides are received from meals and are also produced by the liver from common components. Nucleotides are made up of three component molecules: a nucleobase, a sugar with five carbons (ribose or deoxyribose), and just a phosphate group with one to three phosphates. Nucleotides also play an important role in metabolism at the cellular level.
To know more about the Dinucleotide , here
https://brainly.com/question/30035116
#SPJ4
morphine is administered as the hydrochloride salt. adapt the structure below in the blue box to show the hcl salt. explain why the hydrochloride salt is used in the green box.
It is possible to obtain morphine as a hydrochloride salt. Morphine is present in it. opium's main alkaloid and the original narcotic and analgesic opiate, morphine. Both central nervous system & smooth muscle are just two areas where morphine has wide-ranging effects.
Hydrochloride morphine: what is it?a medication for the management of moderate to extreme pain. Certain kinds of coughs may also be treated with it. With the help of opiate receptors within the central nervous system, morphine is converted into hydromorphone hydrochloride. It is both a kind of analgesic and an opioid.
What is morphine called?The class of drugs known as narcotic analgesics includes morphine (pain medicines). It alleviates pain by acting just on central nervous system (CNS).
To know more about morphine visit:
https://brainly.com/question/10665765
#SPJ4
ammonia molecules react with water to form a solution that contains ammonium ions and hydroxide ions. how should water be classified in this reaction
In this reaction, the water is considered a base.
When ammonia molecules react with water, they form a solution that contains ammonium ions and hydroxide ion.
In this reaction, water will act as a base.This is because it is accepting hydrogen ions from the ammonia molecules and reacting with them to form a solution that contains both ammonium and hydroxide ions.
This is an example of a neutralization reaction, where an acid and a base react to form a neutral solution.
The water is classified as a reactant, as it is consumed and converted into the product solution.
To learn more about base, click here:
https://brainly.com/question/13773045
#SPJ4
In order for light to change a material,what must happen?
In order for lights to change material, it needs to interact with electrons, causing electrons to absorb or release energy, thus causing a change in the material. In simple words, refraction is needed
calculate the ph of the solution upon the addition of 0.015 mol of naoh to the original buffer.
After 0.015 mol of NaOH is added to the original buffer, the solution's pH is 4.8.
What are the answer and an example?A homogenous combination involving two or more materials with particles of less than one nm is referred to as a solution. Solutions come in many forms, including soda water, salt and sugar solutions, and others. Every element in a solution appears as a single wave.
When we know that Ka Equals 1.8 x 10⁻⁵, we may utilize it to calculate Pka.
by using this formula:
Pka = -㏒Ka
= -㏒(1.8 x 10⁻⁵)
= 4.7
Now, after we have got the Pka we need now to get moles of NaC₂H₃O₂ and
Moles of HC₂H₃O₂:
When moles of NaOH = 0.015 moles
When moles NaC₂H₃O₂ after adding NaOH
= initial mol NaC₂H₃O₂ + mol NaOH
∴moles NaC₂H₃O₂ = 0.1 + 0.015 = 0.115 moles
And moles HC₂H₃O₂ after adding NaOH
= initial mol HC2H3O2 - mol NaOH
∴ moles HC2H3O2 = 0.1 - 0.015 = 0.085 moles
So, when we have moles [HC2H3O2] &[NaC2H3O2] so we can substitution its values in [A] &[HA] :
By using H-H equation we can get the PH:
When PH = Pka + ㏒[A]/[HA]
Ph = 4.7 + ㏒0.115/0.085
= 4.8
To know more about Solution visit:
https://brainly.com/question/25326161
#SPJ4
The complete question is-
A chemist breaks down a compound into 3.4 moles of carbon and 6.8 moles of oxygen. What is the percent composition by mass of each element in the compound?
The percent composition by mass of each element in the compound are 27% carbon, 73% oxygen.
What is the solution to percentage composition?Composition as a percentFind the compound's molar mass in grammes per mole for each element.Calculate the compound's overall molecular weight.Subtract the total molecular mass from the component's molar mass.The number you have now will be between 0 and 1. To obtain the composition in percent, multiply it by 100%.
The mass of an element in 1 mole of the compound is divided by the compound's molar mass, and the result is multiplied by 100 to determine the mass percent of the element in the compound.
3.4 moles of carbon / molar mass * 100 = 27% carbon
6.8 moles of oxygen / molar mass * 100 = 73%
To learn more about percent composition refer to:
https://brainly.com/question/17021926
#SPJ1
Compute the atomic packing factor for the rock salt crystal structure in which rC/rA=0.414.
The APF for the rock salt crystal structure with rC/rA = 0.414 is 0.68.
What is atomic packing factor?The atomic packing factor (APF) of a crystal structure is a measure of how closely packed the atoms are in the crystal lattice. It is calculated by dividing the total volume of all the atoms in the cell by the volume of the cell itself.
In the rock salt (NaCl) structure, rC (the radius of the chloride ion) is 0.414 times the radius of the sodium ion, rA. The APF for this structure is calculated as follows:
APF = (4 * (rA + rC)^3) / (a^3)
Where a is the lattice parameter of the crystal (the length of the side of the unit cell).
Plugging in the values, we get:
APF = (4 * (1.88 + 0.75)^3) / (5.64^3)
APF = 0.68
Therefore, the APF for the rock salt crystal structure with rC/rA = 0.414 is 0.68.
To learn more about atomic packing factor
https://brainly.com/question/24262135
#SPJ4
How do you find the mass and fractional abundance of an isotope?
Bromine has two naturally occurring isotopes (Br-79 and Br-81) and an atomic mass of 79.904 amu.
a. If the natural abundance of Br-79 is 50.69%, what is the natural abundance of Br-81?
b. If the mass of Br-81 is 80.9163 amu, what is the mass of Br-79?
For an isotope, fractional abundance is abundance that is expressed as a fraction.
Natural abundance is shown as a percentage, whereas fractional abundance is represented by a number between 0 and 1. The mass number of an isotope is the total number of protons and neutrons in its nucleus. Because each proton and neutron has a mass equal to one atomic mass unit, this is the case. By dividing the sum of the protons and neutrons by one amu, you may get the atom's mass.
a.If Br-79 has a natural abundance of 50.69%, then Br-81 will have the following abundance: (100 - 50.69)% = 49.31% is what fractional abundance of 0.4931 is equivalent to.
b. The mass of the isotope Br-79 is 78.91 u
Learn more about Isotopes
brainly.com/question/11394246
#SPJ4
how many types of nonequivalent protons are present in each of the following molecules?
Molecule #1
CH3CH2C=CH
Molecule #2
CH3CH2C(CH3)2CH2CH3
Molecule #3
CH3CH2CH2CH2OCH3
The type of proton in a molecule is referred to as a nuclear magnetic resonance (NMR) active proton. These protons possess a magnetic moment and can be observed in NMR spectroscopy, which is a powerful analytical tool for determining the structure of organic molecules. The chemical shift of the NMR active protons in a molecule depends on their electronic and magnetic environment, which can be used to identify the specific type of proton and the chemical groups it is associated with.
Learn more about molecule, here https://brainly.com/question/19922822
#SPJ4
Aluminum reacts with oxygen to produce aluminum oxide. Write an unbalanced formula equation including physical states for the reaction.
Answer:
Al+O2=Al2O
Explanation:
Aluminum is a metal which is part of the group one elements hence given a valence 1 and since gases are known to be diatomic molecules hence the valence 2..
Am just trying am also a student
