ionic compound cation anion NaCl Na Cl Fel (Nos), CrS 2 NHACl Mn(504) 2

Enantiomers are pairs of compounds with exactly the same connectivity but opposite three-dimensional shapes.

What is a enantiomer?

In chemistry, an enantiomer (also called an optical isomer, enantiomer, or optical antipode) is one of two stereoisomers that are not superimposable on their own mirror image. Enantiomers are similar to the right and left hands and cannot be superimposed when looking at the same face. No amount of reorientation will align the four unique groups (see Chirality (Chemistry)) on the chiral carbons exactly. The number of stereoisomers a molecule has can be determined by the number of chiral carbons it has. Stereoisomers include both enantiomers and diastereomers.

Like enantiomers, diastereomers have the same molecular formula and are not superimposable, but they are not mirror images of each other.

Therefore, Enantiomers are pairs of compounds with exactly the same connectivity but opposite three-dimensional shapes.

To know more about enantiomers, visit:

https://brainly.com/question/13265194

#SPJ4

Due to its polar nature and lack of OH or NH groups, dimethylformamide is a polar aprotic solvent. The molecule is made polar by its polar C=O and C-N links. The molecule is aprotic because neither O-H nor N-H bonds exist.

The inability of polar aprotic solvents to form hydrogen bonds with the substrate is referred to as eroticism. They lack hydrogen atoms that can form hydrogen bonds and do not contain any hydrogen atoms that are directly coupled to an electronegative atom.

As illustrations, consider acetone, chloroform, dichloromethane, and other aprotic solvents.

"Borderline" Polar Aprotic Solvents Have Low (10) Dielectric Constants And Small Dipole Moments :

Compared to nonpolar solvents, these solvents have slightly higher dielectric constants (between 5 and 20). They are suitable "general purpose" solvents for a variety of processes due to their moderate polarity. Because they lack O-H or N-H bonds, they are "aprotic." They just operate as the conduit for our aims; they don't take part in the reactions.

With High (>10) Dielectric Constants, Four Key Polar Aprotic Solvents

These solvents all have high dielectric constants (>20), but they don't engage in hydrogen bonding (no O-H or N-H bonds). They can dissolve charged species like different anions utilized as nucleophiles due to their high polarity. These nucleophiles are more reactive because they are comparatively "free" in solution due to the absence of hydrogen bonding in the solvent. These solvents do not engage in reactions in the way that we need them to.

To learn more about polar aprotic Please visit the below link.

https://brainly.com/question/29346943

#SPJ4

Millikan utilized specific numerical data gathered by JJ. Thomson

The Nobel Prize in Physics was awarded to American experimental physicist Robert Andrews Millikan (March 22, 1868 – December 19, 1953) in 1923 for his work on the photoelectric effect and the measurement of the fundamental electric charge.

To ascertain the amount of electric charge that a single electron can hold, Millikan started a series of experiments in 1909. The first thing he did was chart the movement of charged water droplets in an electric field. The experiment was not precise enough to produce results that were persuasive, but the data did indicate that the charge on the droplets is a multiple of the elementary electric charge. His well-known oil-drop experiment, in which he substituted oil for water, produced more accurate results in 1910.

To learn more about the Millikan Please visit the below link.

https://brainly.com/question/12131398

#SPJ4

The right answer is B, where n is changed from 3 to 1. A transition's energy release is given by E 36Z2(1n211n22)eV.

What in spectroscopy is a transition?

When an electron is promoted from a full orbital to an empty orbital, transitions take place. In -bonds, sigma electrons are found.

The relationship between electron transitions and wavelength

Planck's equation, E = h, relates the energy change connected to a transition to the wavelength of the electromagnetic wave. The formula c = links the wave's frequency to both its wavelengths and the light's speed.

To know more about transition visit

brainly.com/question/18156550

#SPJ4

Situation B: 'an offshore oil rig needs to more efficiently process data' refers to what would benefit the most from using Edge computing.

Edge computing provides a way to optimize web applications and Internet devices by bringing computing closer to the source of the data. As a result, this minimizes the need for long-distance communications between client and server, reducing latency and bandwidth usage. In simple words, Edge computing means utilizing fewer processes in the cloud and moving those processes to local places - such as on a user’s computer, an edge server, or an IoT device.

You can learn more about Edge computing at

https://brainly.com/question/23858023

#SPJ4

vinyl carbocation is unstable due to its hybridization and presence of double bonds.

A carbocation in which the carbon atom having the open octet and positive formal charge is part of a carbon-carbon double bond. Hybridization with a better s-character A better s-character in addition depletes the carbon atom and makes it extra electron poor that makes a carbocation pretty risky. Thus, vinyl carbocation is unstable due to its hybridization and presence of double bonds. A vinyl carbocation has a positive charge on the same carbon because the double bond. This is very risky and ranks below a methyl carbocation in stability. Allylic carbocations are capable of percentage their burden of charge with a close-by institution through resonance.

To learn more about carbocation check the link below:

https://brainly.com/question/13998560

#SPJ4

Nuclear equations should be balanced due to the fact they should obey the regulation of conservation of mass and the regulation of conservation of price.

In a nuclear image including 21H , the 1 is the atomic wide variety — the wide variety of protons. It additionally represents the price, for the reason that price on a proton is +1Balancing of nuclear equation needs to be executed via way of means of equating the whole atomic wide variety in addition to the whole mass wide variety earlier than and after the response via way of means of following the legal guidelines of conservation of atomic wide variety and mass wide variety respectively in a nuclear response.

Using efficaciously balanced equations is critical whilst looking to recognize nuclear reactions. All equations want to be balanced to comply to 2 conservation legal guidelines: the mass wide variety is conserved, and the electric price is conserved.

Read more about equation;

https://brainly.com/question/2972832

#SPJ4

The electrons in an atom that are in orbits away from the nucleus are called valence electrons. Nitrogen: 5, Silicon: 4, Oxygen: 6, Magnesium: 2.

Valence electrons are the electrons that reside in an atom's outermost shell. The role of valence electrons in controlling an atom's reaction makes them crucial. By writing an octet, you'll be enabled see how many protons fill the highest amount of energy.

In chemistry, valence, sometimes called valency, is a characteristic of an element who establishes how many other atoms of the element each atom can interact with. The phrase, which was first used in 1868, is used to represent both the broad capability of pairing of an element and its numerical value.

To know more about valence electrons visit:

https://brainly.com/question/13993867

#SPJ4

If copper (II) chloride and iron (III) react, the metal that will appear would be copper.

If a solution of copper (II) chloride and iron (III) react, copper would be produced according to the following chemical equation:

[tex]CuCl_2 + Fe --- > FeCl_3 + Cu (s)[/tex]

This is so because iron (III) is able to displace copper from copper (II) chloride. According to the table of reactivity series of cations,  iron (III) is higher than copper. As a rule of thumb, higher-placed cations are able to displace lower-placed cations in solution but the reverse cannot occur.

Thus, iron (III) is able to displace copper from copper (II) chloride resulting in the formation of copper as a result of being higher-placed on the reactivity series table.

More on the cation reactivity series can be found here: https://brainly.com/question/29632468

#SPJ1

Answer:

Chromium appears Silvery grey in color, with a highly polished surface.

When Chromium is heated it forms a green color Chromic oxide.

The information above on formaldehyde exposure measurements is all ACCURATE.

Formaldehyde has a 2 ppm Short-Term Exposure Limit (STEL). Any 15-minute period cannot have an average exposure higher than 2 ppm. Special conditions apply to exposure at or above the STEL. Averaging over an 8-hour period, formaldehyde has an action level of 0.5 ppm.

A concentration of 0.5 parts formaldehyde per million parts of air (0.5 ppm), computed as an eight-hour time-weighted average (TWA) concentration, is considered the action level (AL), at which an evaluation of exposure must start.

To know more about formaldehyde visit: https://brainly.com/question/15385187

#SPJ4

6.03% (m/v) solution of glucose Solution of 2.6% (m/v) nacl 5.0 m/v glucose and 0.9% m/v nacl were present.

In hemolytic anemia, red blood cells are lost more quickly than they are produced. Hemolysis is the term for the breakdown of red blood cells. Oxygen is transported throughout your body by red blood cells. You have anemia if your red blood cell count is below normal.

A blood condition known as hemolytic anemia is when your red blood cells degrade or expire more quickly than your body can produce new blood cells to replace them. People may inherit genetic disorders that lead to anemia, certain illnesses, or they may develop hemolytic anemia.

To know more about Hemolysis visit:

https://brainly.com/question/10260373

#SPJ4

Answer: Alloys, such as steel which is made from a mixture of iron and carbon.

Each polysaccharide has its own unique properties and functions. Chitin is a structural polysaccharide that provides support for the exoskeletons of animals such as arthropods. Starch is a glucose-based polysaccharide that functions as a storage form of fuel in plants. Glycogen is also a glucose-based polysaccharide, but it functions as a storage form of fuel in animals. Finally, cellulose is a structural polysaccharide that provides support for plants.

Learn more about polysaccharide, here https://brainly.com/question/16580858

#SPJ4

The abbreviations of femtosecond is fs, gigaliter is GI and decimeter is dm.

In order to make them easier to write, the units for the metric system are frequently written as acronyms. The units listed below are abbreviated as follows:

The femtosecond is represented by the symbol fs, where 1 fs is equal to 1015 1015 of a second. A 1015 factor is denoted by the prefix femto-.

The gigaliter is referred to as Gl, and one Gl is equal to 109 109 liters. The prefix giga- denotes a 109 109 factor.

There are 10 decimeters (abbreviated as dm) for every meter, hence the name. 10 is denoted by the prefix deci-.

For more information on metric system kindly visit visit to

https://brainly.com/question/25966695

#SPJ4

Magnesium hydroxide (mg(oh)2) and aluminum hydroxide (al(oh)3) are common ingredients in antacids. when these compounds combine with stomach fluid, which contains hydrochloric acid (hcl), -pH value is 7

Antacids work by inactivating (system is based) acid in the stomach. This is attributable to the fact that the chemical compounds in antacids are bases (alkalis), that are the inverse of acids. The initial response of an acid and a base is known as neutralization reaction. This neutralisation lessens the corrosion rate of the stomach contents.An antacid is a substance that neutralises production of stomach acid and is employed to treat heartburn, indigestion, and stomach upset. Antacid tablets have been used to treat constipation and diahorrea in the past. Antacids on the market contain aluminium, calcium, magnesium, or sodium salts.Antacids are medications that help to relieve indigestion and heartburn by neutralising (counteracting) stomach acid.

To learn more about antacids here:

https://brainly.com/question/28187760

#SPJ4

Repetition and replication are alike as they are repeated runs of combination of factors and levels to confirm the result of an experiment. The way they are different is that repetition does the duplicate runs consecutively while replication does multiple runs but during identical but different experimental runs.

Repetition refers to the multiple sets of measurements that occur repeatedly during one scientific investigation. Hence, repetition is when the same person does same experiment multiple times. Replication refers to a scientific investigation that is reproduced by another scientific investigation. Hence, replication is when a different person does an experiment previously done by someone else or copies. Repetition is multiple trials while replication is the entire experiment is redone.

Learn more about Repetition:

https://brainly.com/question/605147

#SPJ4

The final dilution factor of serum contained in tube six is 64.

Dilution is the process of adding solvent to a solution. The concentration of the solution will change according to the equation

V₁ M₁ = V₂ M₂

where

The dilution factor = M₂ ÷ M₁

The problem didn't give information the concentration of serum. Suppose the initial serum concentration is M.

In tube #1

In tube #2

In tube #3

In tube #4

In tube #5

In tube #6

Learn more about dilution factor here: https://brainly.com/question/13665470

#SPJ4

Entropy changes are most likely to be favorable during a plant's growth from a seed.

To learn more about Entropy refer to:

https://brainly.com/question/419265

#SPJ4

Infrared radiation light spectrum of limonene - 1 methyl-4-(1 methylethenyl)-cyclohexene.

The study of how electromagnetic radiation is absorbed, emitted, and scattered by atoms and molecules-whether they are in the gaseous, liquid, or solid phase-is known as spectrum spectroscopy. Although the terms light, radiation, and electromagnetic radiation can all be used interchangeably, visible electromagnetic radiation is referred to as light. In Activities 1 and 2, you will learn about various characteristics of electromagnetic radiation. Understanding molecular characteristics and the outcomes of spectroscopic studies requires spectroscopy, which was essential in the development of quantum mechanics. To make the subject more tangible and less abstract and technical, it serves as a "stepping stone" to introduce us to the ideas of quantum mechanics and the quantum mechanical explanation of molecular features. A spectrum is a graph that shows how an atomic or molecular system responds to specific wavelengths of radiation or the intensity of the radiation at those wavelengths. An absorption spectrum shows how much light is absorbed by a material at each wavelength of radiation. The three most popular ways to visualize an absorption spectrum are as a plot with either the transmission (T), absorbance (A), or absorption coefficient on the y-axis and the wavelength on the x-axis. The optical density is another name for the absorbance. If we use the definitions of I0 (amount of light striking a sample), I (amount of light the sample transmits), and d (thickness of the sample).

To know more about spectrum please refer: https://brainly.com/question/6836691

#SPJ4

Complete question- What is Infrared radiation (IR) spectrum of limestone Draw the graph.

b.Mg2( HSO4)2 .Magnesium hydrogensulfate [Mg(HSO4)2], as a heterogeneous solid acid catalyst, has been used for the mild formation of trimethylsilyl (TMS).

Mg(HSO4)2 from various primary, secondary, and tertiary aliphatic alcohols; aromatic alcohols; and oximes using hexamethyldisilazane (HMDS) under ambient conditions. Hexamethyldisilazane (HMDS) has been utilized as a heterogeneous solid acid catalyst to moderately produce trimethylsilyl (TMS) ethers from a variety of primary, secondary, and tertiary aliphatic alcohols, aromatic alcohols, and oximes under ambient conditions. Additionally, under solvent-free conditions and with short reaction durations and high to exceptional yields, 14-aryl-14H-dibenzoxanthenes and 1,8-dioxo-octahydroxanthene derivatives were produced in the presence of Mg(HSO4)2. The balanced chemical equation is therefore Mg (s) Magnesium + H 2 SO 4 (aq) Sulphuric acid MgSO 4 for the reaction of magnesium solid with sulfuric acid to produce hydrogen gas and magnesium sulfate ( aq ) Hydrogen (g) with magnesium sulfate.

Learn more about magnesium sulfate here:

brainly.com/question/22370698

#SPJ4

The rule of 13 is a crude method for estimating a molecule's formula from its  molecular mass. It

The result is a basic formula with solely hydrogen and carbon atoms. The molecular mass is multiplied by 13 to get this fundamental formula.In the Rule of Thirteen, we begin by creating a basic formula that exclusively comprises carbon and hydrogen. To find the hase formula, divide the molecular mass, M, by 13. (the mass of one carton plus one hydrogen) There is a numerator, n, and a remainder, r, in this computation.

To learn more about molecular mass click here:

https://brainly.com/question/18446366

#SPJ4

The net change in NADH , FADH2 , and GTP is : NADH : 6 molecules, FADH2 : 2 molecules, and GTP : 2 molecules.

The citric acid cycle is the also called as the krebs cycle. it is also called as the TCA cycle. it is the series of the chemical reactions occurs to release the energy that is stored through the oxidation of the acetyl CoA. the net change in NADH , FADH2 , and GTP from the passage of two acetyl-CoA molecules through the citric acid cycle. degradation of one molecule of glucose yields two acetyl-CoA molecules.

The NADH = 6 molecules

The FADH2 = 2molecules

The GTPP = 2 molecules

To learn more about citric acid cycle here

https://brainly.com/question/16040590

#SPJ4

As sediments and dead vegetation slowly filed the pond, the types of plants in the community changed.

With the aid of stopping invasive species and new pests from harming or changing native flowers and animals, the regulations prevent the accumulation of useless leaves, bugs, and animals. just photo how the sector may appear! more significantly, decomposers enable the number one producers of an ecosystem, typically flora and algae, to access essential nutrients.

the first oPioneer species are the first creatures to arise in zones of number one succession (usually lichens or mosses). they may be the unique species inside the area. They ought to be robust and resilient.

The Gulf circulate, which transports heat floor water up from the tropics to North the us and Western Europe, turned into removed via the freshwater.

The freshwater killed off the Gulf move, which brings heat floor water up from the tropics to North the usa and Western Europe.

To learn more about vegetation visit:https://brainly.com/question/1981135

#SPJ4

In the given molecular art options, option B and F are elements and option A, C, D and E are compounds.

Elements refer to pure substances which are composed of only one type of atom. It refers to a class of substances that cannot be separated into simpler substances by chemical means. In the given molecular structures, option B and F are elements as they made up of single type of atoms. Compounds refer to substances which are formed by two or more different types of elements that are united chemically in fixed proportions. When the elements combine together, they react with each other and form chemical bonds as a result of sharing or exchanging electrons between atoms which are difficult to break. As molecular structures, option A, C, D and E are made up of different type of atoms, they are compound.

Learn more about Elements:

https://brainly.com/question/6258301

#SPJ4

The correct response is C) Hydrophobic residues are normally on the inside and hydrophilic residues are on the outside.

According to Merriam-Webster, the word "hydrophilic" means "of, related to, or having a high affection for water." In essence, this means having the capacity to mix easily, dissolve, or bind to water. The 'hydrophilicity' of a molecule or surface refers to how much or how little it draws water. Sugar, salt, starch, and cellulose are a few of the most typical examples of hydrophilic compounds. Aluminum foil is one example of a hydrophilic metal surface. Lotus leaves are extremely hydrophobic and cause water to bead because of their surface structure. Hydrophobic surfaces tend to reject water, forcing it to form droplets.

To learn more about hydrophilic here

https://brainly.com/question/18522370

#SPJ4

Which of the following is CORRECT when considering the tertiary structure of globular proteins?

A) All parts of the proteins can be classified as helix, β sheet or turns.

B) The amino acid proline never occurs in a region where the polypeptide chain bends or turns.

C) Hydrophobic residues are normally on the inside and hydrophilic residues are on the outside.

D) β sheets cannot be twisted or wrapped into barrel structures.

E) None of the above.

At 46⁰C and 0.880 atm pressure, a gas occupies a volume of 0.600l, It  will occupy 1.643 L at 0°C and 0.205 atm.

PV = nRT is the equation for an ideal gas. P is the ideal gas's pressure, V is the ideal gas's volume, n is the entire amount of ideal gas, expressed in moles, R is the universal gas constant, and T is the temperature.

Given that,

Pressure (P₁) = 0.88 atm

Volume (V₁) = 0.6 L

Temperature (T₁) = 46⁰C = 319 K

Pressure (P₂) = 0.205 atm

Volume (V₂) = ?

Temperature (T₂) = 0⁰C = 273 K

Using ideal gas equation:

P₁V₁/T₁ = P₂V₂/T₂

or, (0.88) × (0.6) / 319 = (0.275 × V₂) /273

or, V₂ = 1.643 L

Thus, it will occupy 1.643 L at 0°C and 0.205 atm.

To know more about volume refer to:

https://brainly.com/question/27100414

#SPJ1

Argon gas is heavier than conventional air, therefore when it is injected into the insulating glass air space, convection moves much more slowly. As a result, heat is lost less slowly in the winter from heated homes and on hot summer days thanks to slower heat entry.

How cold is the absolute zero?

Water typically has a freezing point and melting point of 0 °C or 32 °F. If supercooling takes place or there are pollutants in the water that could cause freezing point depression to happen, the temperature may be lower. Water may stay a liquid down to -40 or -42 degrees Fahrenheit in some circumstances.

What is above the freezing point of 0?

An aluminum soda can, a candle, or a piece of chocolate, all of which have freezing points above 0°C, would suit this description. Remember that a substance's melting and freezing points are the same.

To know more about freezing point visit;

https://brainly.com/question/3121416

#SPJ4

PF3 and SO2 of these molecules or ions does the presence of nonbonding electron pairs produce an effect on molecular shape.

The three-dimensional structure or arrangement of atoms in a molecule is referred to as molecular geometry or the  molecular shape . The polarity, reactivity, phase of matter, color, magnetism, and biological activity of a chemical can all be identified by studying its molecular structure. We have to learn about the Lewis electron dot structure in order to determine the shapes of molecules. Despite the fact that the Lewis theory does not directly affect molecule shape, it is a good starting point for forecasting molecule shape. Finding the bond pairs and lone pairs is made easier by the Lewis structure. In order to determine the molecular geometry and the electron-group geometry using the Lewis structure, we next apply the valence-shell electron-pair repulsion (VSPER) theory.

Learn more about molecular shape here:

https://brainly.com/question/22697472

#SPJ4

a molecular geometry with triangular pyramids.The presence of two lone pair of electrons and an electrostatic number of four further indicate the tetrahedral electronic structure of the hydrazine molecule.

Atoms of nitrogen form a single connection with hydrogen and a double bind with one another.In this molecule, there are two pairs od lone electrons and four pairs with bonding electrons.

While N2 lacks lone pairs of electrons, NH3 and NH2NH2 do.C.Every nitrogen in NH2NH2 has an oxidation number of +2.

To know more about  Lewis structure of hydrazine visit:

https://brainly.com/question/14195292

#SPJ4