It takes a train going 50 mph approximately ____ to stop safely.
a. 100 feet
b. ½ mile (9 football fields)
c. 1 ½ miles (26 football fields)
d. 5 miles (88 football fields)

Latency has four primary causes: The main factor causing network slowness is data processing. In order to determine a data packet's precise destination at this time, the header must be studied.

Select the best route, and then add it to the relevant link's transmission queue. Unstructured data must be converted into machine-readable information through a process known as data processing. So acquiring, recording, organizing, storing, and adapting or modifying the data constitute the process of converting raw data into usable information. Latency has four primary causes: The main factor causing network slowness is data processing. All actions taken to convert useless data into information are categorized as data processing. Informational outputs include things like reports from analytics, visualizations, and well-organized data collections.

Learn more about data processing here

https://brainly.com/question/27505981

#SPJ4

The complete question is -

What factors does network latency depend on?.

Answer:

The spring constant is 907.2 N/m

Explanation:

v^2 = u^2 + 2as

Where:

v = final velocity

u = initial velocity

a = acceleration

s = displacement

As the spring is clamped to the table, the only displacement is horizontal, so the only acceleration is due to gravity. The final velocity is 0, as the ball lands on the floor. Therefore, we can use the equation of motion to determine the initial velocity of the ball:

v^2 = u^2 + 2as

0 = u^2 + 2g(1.6 m)

u = √ (2g(1.6 m))

We know that acceleration due to gravity is 9.8 m/s^2, so:

u = √ (2 * 9.8 * 1.6) = 4.6 m/s

Now we can use the conservation of energy to solve for the spring constant.

The spring constant can be determined by using the equation:

PE = 1/2 kx^2

where PE is the potential energy stored in the spring, k is the spring constant, and x is the compression of the spring.

KE = 1/2 mv^2

where KE is the kinetic energy of the ball, m is the mass of the ball, and v is the initial velocity of the ball

The sum of the potential energy stored in the spring and the kinetic energy of the ball is conserved, so:

1/2 kx^2 = 1/2 mv^2

We can now substitute the values we know into the equation:

1/2 k * (0.2)^2 = 1/2 * (19g) * (4.6m/s)^2

Solving for k:

k = (19g * (4.6m/s)^2 ) / (0.2m)^2

k = 907.2 N/m

Note that the unit of mass is gram (g) and it needs to be converted to kg to make the units consistent.

The angular momentum of a particle rotating around an axis is defined as the moment of the particle's linear momentum around that axis.

Angular momentum is the rotational equivalent of linear momentum in physics. It is an important physical quantity because it is a conserved quantity—in a closed system, the total angular momentum remains constant. Both the direction and magnitude of angular momentum are conserved. The property of any rotating object given by moment of inertia times angular velocity is defined as angular momentum. It is the property of a rotating body determined by the product of the rotating object's moment of inertia and angular velocity.
Here,

The moment of a particle's linear momentum about an axis is defined as its angular momentum. The product of linear momentum and the perpendicular distance of its line of action from the axis of rotation is used to calculate it.

To know more about angular momentum,

https://brainly.com/question/29716949

#SPJ4

Answer:

Explanation:

To calculate the mass of an object that would reduce Earth's orbital velocity by even a hundredth of a percent, we need to use the conservation of momentum principle. According to this principle, the total momentum of a system remains constant if no external forces act on it.

In this scenario, we can consider the Earth and the object as a closed system. The initial momentum of the system is Earth's momentum, and the final momentum is Earth's momentum after the collision.

Let's assume the mass of the Earth is M_E and the initial velocity of Earth is V_E. After the collision with the object, the final velocity of Earth is V_E' . The mass of the object is M_O, and its velocity is V_O (twice Earth's velocity)

The conservation of momentum principle states that:

M_E * V_E = M_E * V_E' + M_O * V_O

To reduce Earth's orbital velocity by even a hundredth of a percent, we can assume that V_E' = V_E - (0.0001 * V_E)

Therefore,

M_E * V_E = M_E * (V_E - (0.0001 * V_E)) + M_O * (2 * V_E)

Rearranging this equation we can find the mass of the object M_O

M_O = M_E * (V_E / (2 * V_E - 0.0001 * V_E))

To get the exact mass of the object, we need to know the mass of the Earth and the velocity of Earth, which are not provided in the question. However, this calculation will give an approximate mass that the object would need to have in order to reduce Earth's orbital velocity by even a hundredth of a percent.

the effort done is 300 joules when a 100 lb rock is raised to a height of 3 ft, according to the work done calculation.

How much work has been done?

It should be converted to energy in order to move an object. Energy can be transferred by the use of force. Work done refers to the amount of energy used by a force to move an object.

What exactly is a physics "work done"?

When an object is moved over a distance by an external force, at least a portion of that force must be applied in the direction of the displacement. This is known as work in physics.

To know more about work done visit:

brainly.com/question/30073908

#SPJ4

Acceleration is the rate of change of velocity over time. To calculate the acceleration of the shopping cart, you would need to use the formula:

a = (v2 - v1) / (t2 - t1)

where a is the acceleration, v1 is the initial velocity, v2 is the final velocity, t1 is the initial time, and t2 is the final time.

In this case, the initial velocity is 7 m/s at time t = 1s and the final velocity is 28 m/s at time t = 4s. So,

a = (28 m/s - 7 m/s) / (4s - 1s) = 21 m/s^2

So the cart's acceleration is 21m/s^2

To know more about Acceleration

https://brainly.com/question/460763

The mean of the sample is point estimator of mean of the population from which samples are drawn randomly.

Correct option: II and III is correct choice.

Samples G and H are selected from the same population of quantitative data. Mean of G is equal to the mean of the population. We cannot work on population in most of the cases thus we draw samples and work on sample to predict the properties of population. Sample mean is point estimator of population mean, and is used to predict the population mean.

Since both G and H are samples drawn from same population, thus, they both are point estimators of the population mean. It is not necessary that both G and H must be same. They can be same and cannot be same.

Thus, Option: II and III is correct choice

To know more about mean of the sample refer to:

brainly.com/question/20747890

#SPJ4

The complete question is as follows:

Samples G and H were selected from the same population of quantitative data and the mean of each sample was determined. The mean of sample G is equal to the mean of the population. Which of the following statements must be true?

I. The mean of sample H must also be equal to the population mean.

II. The mean of sample G, TG, is a point estimator for the mean of the population.

III. The mean of sample H, my, is a point estimator for the mean of the population.

A. I only

B. II only

С. III only

D. I and II

E. II and III

To safely cross a canyon 1.00 km wide with a starting point 0.750 km lower than the opposite side, the minimum constant acceleration in the x-direction that must be provided by the engine of the motorcycle is 9.8 m/s² (approximately the acceleration due to gravity).

The motorcycle must have a minimum constant acceleration in the x-direction of 9.8 m/s² in order to safely cross the canyon. This acceleration is necessary to counteract the force of gravity and ensure that the motorcycle and rider can clear the distance of the canyon and land on the opposite side at a point that is 0.750 km higher than the starting point. The motorcycle is assumed to be fired horizontally from the starting point, and the rider must be able to maintain balance throughout the crossing.

To safely cross a canyon 1.00 km wide with a starting point 0.750 km lower than the opposite side, the minimum constant acceleration in the x-direction that must be provided by the engine of the motorcycle is 9.8 m/s² (approximately the acceleration due to gravity). This is assuming that the motorcycle is fired horizontally from the starting point and that the rider is able to maintain balance throughout the crossing.

Learn more about Rocket Motorcycle Canyon Crossing here:

https://brainly.com/question/13016913

#SPJ4

Answer:

Work Done = Force x Displacement

Explanation:

A light-year is a unit generally used to express the distance that light travels in one year, the distance between two stars can be expressed in light years.

Light-years are units used to express the distance that light travels in a year. Light travels through interstellar space at a speed of 186,000 miles (300,000 kilometers) per second and 5.88 trillion miles (9.46 trillion kilometers) per year.

A light-year is a unit of measurement for distance rather than time (as the name might imply). A light-year is the distance a light beam travels in one Earth year, which is equivalent to roughly 6 trillion miles (9.7 trillion kilometers).

To know more about light-year visit:

https://brainly.com/question/10321474

#SPJ4

Complete question is " A light-year is a unit generally used to express the distance that light travels in one year. Which of these can be expressed in the light years?

A] the age of a rock

B] the distance between two stars

C] the speed at which the earth revolves around the sun

D] the time earth takes to complete a revolution around the sun".

Momentum is a moving body's quantity of motion, measured as the product of its mass and velocity. It is calculated as mass *velocity.

Momentum is defined as the quantity of motion of a body. It is measured by "mass velocity," since momentum is affected by velocity and the direction of the body's motion. Because velocity is a vector and mass is a scalar variable, momentum is a vector quantity. Momentum is defined as mass multiplied by velocity. The definition of momentum is "mass moving." Because all objects have mass, when they move, they have momentum - their mass is in motion. Momentum is a moving body's quantity of motion, measured as the product of its mass and velocity.

Here,

Momentum is a moving body's amount of motion, calculated as the product of its mass and velocity. It is calculated as mass *velocity.

To know more about momentum,

https://brainly.com/question/22418297

#SPJ4

Answer:

According to NASA, time travel is possible, just not in the way you might expect. Albert Einstein's theory of relativity says time and motion are relative to each other, and nothing can go faster than the speed of light, which is 186,000 miles per second. Time travel happens through what's called “time dilation.

Explanation:

brainiest

The normal stress is 2.92 psi and shear strength is 8.034 psi.

It is necessary to determine the normal stress and shear stress for plane a-a , which is in relation to the direction of the force at an angle 20°. We apply the conditions of equilibrium:

Using these equations we get :

∑[tex]F_{x} = 0[/tex] ⇒ V - 200. cos20° = 0

             ⇒ V = 187.938 lb

∑[tex]F_{y} = 0[/tex] ⇒ N - 200. sin20° = 0

             ⇒ N = 68.40 lb

We calculate the surface area of the cross section:

A = b.d/ sin20

   = 2*4/sin20

   = 23.39

The shear strength is calculated by formula:

Normal stress = N/A , where

N = Force acting on cross section

A = Surface area of the cross section

i.e. Normal stress = 68.40/23.39 = 2.92 psi

The shear strength is calculated by formula:

Shear strength = V/A, where

V = Shear force acting on cross section

A = Surface area of the cross section

i.e. Shear strength = 187.93/23.39 = 8.034 psi

So, the normal stress is 2.92 psi and shear strength is 8.034 psi.

To know more about stress visit:

https://brainly.com/question/13288741

#SPJ4

The efficiency of this light bulb is 25% .

Given data :

output = 30j

Input = 120j

Efficiency  = output / input x 100

  = 30 / 120 x 100

  = 25%

Learn more about efficiency of a light bulb refer to :

https://brainly.com/question/10300122

#SPJ1

According to the International System of Units, the SI unit of distance is a metre. Surprisingly, by using this as the base unit and some equations, many other derived units or quantities such as volume, area, acceleration, and speed are formed.

The magnitude or size of displacement between two positions is defined as distance. It is important to note that the distance between two points is not the same as the distance traveled between them. The total length of the path traveled between two points is referred to as the distance traveled. The total length of an object's actual path is referred to as distance. The displacement of an object between two points is the straight line (shortest) distance between those points, directed from one position to the other. The SI unit for measuring distance and displacement is the meter (m).

Here,

According to the International System of Units, a metre is the SI unit of distance. Surprisingly, by using this as the base unit and some equations, many other derived units or quantities, such as volume, area, acceleration, and speed, can be formed.

To know more about distance,

https://brainly.com/question/11667907

#SPJ4

Work can be calculated with the equation given as Work = Force × Distance

When a force acts on an object to cause a displacement, it was said that work was taking place. Three variables must be known in order to calculate the work when a force causes an object to be displaced.

Work = Force × Distance is the formula for calculating work. The joule (J), also known as the Newton meter (N m), is the SI unit for work. When an object is moved over a distance of 1 m with 1 N of force, one joule is equal to the amount of work that is accomplished.

To determine the amount of work, three quantities must be known. The force, the displacement, and the angle between the force and the displacement are the three variables.

Learn more about work on;

https://brainly.com/question/28199162

#SPJ1

B. The sun and the moon appear to be nearly the same size.

The Sun and the Moon appear to be nearly the same size from the Earth's perspective because the Moon is about 400 times closer to the Earth than the Sun, and the Sun is about 400 times larger than the Moon. This means that the Sun and the Moon appear to have the same size in the sky, which makes possible the phenomenon of a solar eclipse, where the Moon completely covers the Sun. Even though the sun is much larger than the Moon, but its distant location makes it appear small in the sky while the Moon is much smaller but it is much closer to us, that's why they appear to be the same size.

Some common examples of latency are while playing games, audio processing.

Latency is the delay or lag time between when a request is made and when a response is received. An example of latency can occur in network communications, where data packets are sent from one device to another and there is a delay between when a packet is sent and when it is received. Another example of latency can occur in computer systems, where there is a delay between when a command is given and when the computer completes the task. An example of latency can occur while playing online games, where there is a delay between when a player takes an action and when that action is reflected on other player's screens, this is known as "ping". Another example of latency can be seen in audio processing, where there is a delay between the time a sound is made and when it is heard by the listener.

To know more about Latency click here:

https://brainly.com/question/28234702#

#SPJ4

A basic truth of inheritance that had been known well before Darwin's time was that: Offspring frequently resemble their parents AND they inherit genes from their parents.

Assets left to a person's heirs after their death are referred to as inheritance. Cash, investments like stocks or bonds, and other things like jewellery, cars, works of art, antiques, and real estate can all be included in an inheritance. Evolutionary transformation requires genetic inheritance. It explains how genes are transmitted down across generations. Therefore, it may initially appear odd that life history research rarely takes into account genetic inheritance. The most widespread types of inheritance include autosomal dominant, autosomal recessive, X-linked dominant, X-linked recessive, multifactorial, and mitochondrial inheritance. Traits that are determined by the genes found on the autosomes are referred to as "autosomal."

To know more about inheritance refer to:

https://brainly.com/question/15078897

#SPJ4

The complete question is as follows:

A basic truth of inheritance that had been known well before Darwin's time was that Select one:

a. Offspring inherit genes from their parents.

b. selective breeding improves domesticated plants and animals

c. Offspring frequently resemble their parents AND they inherit genes from their parents

d, Offspring frequently resemble their parents.

Torque and work have the same dimension formula but only work is expressed in the SI unit of Joule. Torque is a vector quantity and work is a scalar quantity.

Torque in angular motion is equivalent to what force is in linear motion. In other words torque cause the angular change in and makes the object to rotates in a circular path around its own axis of rotation. It is formulates as T = F ×R. Where F is the force, R is the radius of circular path. its dimension will be [MLT⁻²] × [L] = [ML²T⁻²].

On the other hand, work is the product of force vector(F) and displacement vector(d). Work is said to be done when the object gets displaced in the direction of the force applied. Its SI unit is Joule.

W = F × d × sinθ

Where θ is the direction of force with respect to the displacement.

Its dimension would be, T = [MLT⁻²] × [L] = [ML²T⁻²]

So the dimension formula for both will be the same.

To know more about torque, here

https://brainly.com/question/25708791

#SPJ4

When an object doesn't move over time, its velocity is zero. When there is no displacement of the item, the velocity of the object is 0. Between two different time intervals, the object's position is unchanged.

By dividing the entire distance traveled by the time it took the object to go a certain distance, you may calculate the object's initial velocity. V, d, and t are the three variables that make up the equation V = d/t.

Angular acceleration at time zero is -10 rad/s2, and the angular velocity is 27.5 rad/s. How many complete rotations does the disc make before coming to a stop. The circular path is always parallel to the linear velocity. The tangential speed determines magnitude.

Learn more about velocity Visit: brainly.com/question/29523095

#SPJ4

Correct Question:

How do you find velocity at time t=0?.

Two identical metal spheres a and b are in contact, both are initially neutral. When 1.0×1012 electrons are added to sphere a, then the two spheres are separated : false

The physical property of matter that causes it to experience a force when placed in an electromagnetic field is called as electric charge.

When 1.0x1012 electrons are added to sphere a, then that sphere becomes negatively charged. When two spheres are separated,  electrons will redistribute themselves to maintain equilibrium. This results in both spheres having net charge. Some of the electrons from sphere a will move to sphere b, making it negatively charged.

So, when 1.0×1012 electrons are added to sphere a, then the two spheres are separated is false.

To know more about charge, refer

https://brainly.com/question/25922783

#SPJ4

Explanation:

Acc=change in velocity/time

a=30-0 / 6

a =30/6

a = 5m/s^2

Customers demand to communicate with technology in real time without any delays, hence low latency is essential. Users may stop interacting with a platform due to problems with high latency and time delays.

then switch permanently to a different programme.

One of the biggest causes of user service abandonment is poor latency. To put it clearly, excessive latency can result in enormous losses in revenue and a declining user base. One of the most crucial elements in the success of your application is eliminating latency.

Numerous physical obstacles, such as internet service, internet speed, or particular IP networks, might have an impact on latency. Businesses and IT specialists have consistently developed and implemented methods to enhance network speeds and the overall user experience. This has often taken the shape of data distribution, expanding the global data storage capacity, and enhancing network connectivity.

Learn more about Latency here:

https://brainly.com/question/14264521

#SPJ4

It will take about 12 days for the trekkers predict to walk from phakding to Everest base camp.

This is referred to as a form of movement which consists of walking for several days or several weeks and being entirely or partially self-sufficient.

The standard Everest Base Camp Trek is 130km round trip and is usually divided into 12 days which includes time and space for acclimatization to the region and then we have 8 days to get to Everest Base Camp and 4 days to get back which is therefore the reason why ythe predicted days will be 12 and is the correct choice.

Read more about Trekking here https://brainly.com/question/29529058

#SPJ1

The process by which molecules spontaneously move through a solution or disperse until they are evenly distributed throughout is known as diffusion.

Diffusion is the movement of molecules (either solution- or gas-borne particles) from a region of high concentration to a region of lower concentration, or down a gradient in concentration. Diffusion over the cell surface membrane allows some chemicals to enter and exit cells.

The term "facilitated diffusion" refers to a type of passive transport. It happens when chemicals like glucose or amino acids shift from a state of high concentration to a state of low concentration with the help of carrier proteins or membrane pores.

Learn more about molecules Visit: brainly.com/question/26044300

#SPJ4

Torque τ can be calculated using moment of inertia I and angular acceleration α.

Mathematically, τ = I α

Angular acceleration of a body is due to rotational motion. Moment of inertia is the tendency of the body to restrain the angular acceleration of that body. Torque is an analogous quantity to work and energy.

The steps to calculate torque from moment of inertia are given as, determine the known values such as the angular acceleration and the moment of inertia for the object in question, determine what unknown value we are trying to find, determine which equations we will need to solve for the unknown value and rearrange it if necessary, calculate the desired unknown value.

To know more about torque:

https://brainly.com/question/30187149

#SPJ4

The law of conservation of energy states that energy cannot be created or destroyed, only changed from one form to another.

Energy is the ability to do work. It is the capacity to cause change or to make things happen. Energy is present in many forms, such as thermal energy, radiant energy, electrical energy, chemical energy, mechanical energy, and nuclear energy. Energy is stored in different forms, such as potential energy, kinetic energy, and elastic energy.

The law of conservation of energy states that energy cannot be created or destroyed, only changed from one form to another. Therefore, the 600 joules of energy that were lost in the pulley system must have been converted into a different form of energy, such as heat or sound.

To learn more about energy

https://brainly.com/question/13881533

#SPJ4

Conduction is the charging-by-contact method of charging where the uncharged object takes C: the same type of charge; while induction is the charging-without-contact method of charging where the uncharged object takes A: the opposite charge.

Charging by conduction means to charge an uncharged object by placing it in contact with a charged object. Charging by induction means charging an uncharged object by bringing it close to a charged object without allowing the two objects to come into contact. In conduction, any new currents produced follow the original currents. On contrary, in induction, the new currents induced opposing changes in the original currents.

"

Complete question:

the student explains how conduction is the charging by contact so the uncharged object takes select one type of charge; while induction is the charging without contact so the uncharged object takes select one type of charge.

A-  the opposite charge

B -  the neutral charge

C - the same type of charge

D - No charge

"

You can learn more about charging by conduction and induction at

https://brainly.com/question/16072774

#SPJ4