Magnolia Incorporated has been concerned for some time with the financial performance of its product 1115 and has considered discontinuing it on several occasions. Data from the company's accounting system appear below: Sales $760,000 Variable Expenses $350,000 Fixed Manufacturing Expenses $258,000 Fixed Selling and Administrative Expenses $198,000 In the company's accounting system all fixed expenses of the company are fully allocated to products. Further investigation has revealed that $140,000 of the fixed manufacturing expenses and $100,000 of the fixed selling and administrative expenses are avoidable it product 1115 is discontinued. What would be the effect on the company's overall net operating income il product 1115 were dropped? O a. $170,000.00 O b. $40,000.00 O c. $270,000.00 Od $310,000.00

Answers

Answer 1

The effect on the company's overall net operating income, if product 1115 were dropped, would be an increase of $240,000. (The options provided do not include the correct answer.)

Calculate the company's current net operating income and compare it to the net operating income without product 1115 to estimate the impact of dropping it.

Operating profit:

Sales $760,000 - $350,000 - $258,000 - $198,000 = $760,000 - $806,000 = -$46,000 (loss)

Sales minus product 1115: Variable Expenses (excluding product 1115). Fixed Manufacturing, Selling, and Administrative Expenses (excluding avoidable portion) = $760,000 - ($350,000 - $0) - ($258,000 - $140,000) - ($198,000 - $100,000) = $760,000 - $350,000 - $118,000 - $98,000 = $194,000

$240,000 would enhance the company's net operating income.

To know more about operating income

https://brainly.com/question/25895372

#SPJ11


Related Questions

a
company reports the following financial information before
adjustments:
11 12 13 14 15 Times New Roman ✓ 10 A A Paste BIU A- V V 22 Xfx 16500 A B A Company reports the following financial information before adjustments: 2 Debits Credits 3 Accounts Receivable $25,000 4 A

Answers

Before adjustments, the company reports Accounts Receivable of $25,000.

However, it is important to note that this information alone does not provide a complete picture of the company's financial health. Adjustments such as bad debt expenses and allowance for doubtful accounts may impact the actual value of the company's Accounts Receivable. It is also important to analyze other financial statements such as the balance sheet, income statement, and cash flow statement to fully understand the company's financial situation.

Overall, while the reported Accounts Receivable may seem positive, further analysis and adjustments may be necessary to get a complete understanding of the company's financial health.

To know more about company visit:-

https://brainly.com/question/30532251

#SPJ11

For Solar Industries and its related but separate financing company Solar Financing Corp. Required: a. Calculate the debt to equity ratio for 2019 and 2020. (Round the final answers to 2 decimal places.) Solar Industries (in millions) 2020 2019 43.450 37.300 21,102 24,555 Total Debt (A) Total Equity (B) Solar Financing Corp (in millions) 2020 2019 89,360 77,052 9,070 8,054

Answers

The debt to equity ratio for Solar Industries in 2020 is 0.41, and in 2019 it is 0.54. For Solar Financing Corp, the debt to equity ratio in 2020 is 9.86, and in 2019 it is 9.57.

The debt to equity ratio is a financial metric that indicates the proportion of debt and equity financing used by a company. It is calculated by dividing the total debt by total equity. For Solar Industries in 2020, the total debt is $43.450 million, and the total equity is $21,102 million. Therefore, the debt to equity ratio is calculated as $43.450 million / $21,102 million ≈ 0.41. Similarly, for Solar Industries in 2019, the total debt is $37.300 million, and the total equity is $24,555 million. Thus, the debt to equity ratio is $37.300 million / $24,555 million ≈ 0.54. Moving on to Solar Financing Corp, in 2020, the total debt is $89,360 million, and the total equity is $9,070 million. Hence, the debt to equity ratio is $89,360 million / $9,070 million ≈ 9.86. For Solar Financing Corp in 2019, the total debt is $77,052 million, and the total equity is $8,054 million. Consequently, the debt to equity ratio is $77,052 million / $8,054 million ≈ 9.57.

Learn more about debt to equity ratio here:

https://brainly.com/question/28391877

#SPJ11

Question 2: Asset Utilisation Measure Total Time The Shoe Corporation has been monitoring a leather cutting press in the export department. The data collected is over 2 shifts. Each shift is 8.50-hour

Answers

Asset Utilization Measure (AUM) is a metric used to calculate the efficiency of a company's assets in generating revenue. It measures the company's capacity to generate revenue with the assets available to it.

In this case, Shoe Corporation has monitored a leather cutting press in the export department for 2 shifts, each 8.50-hour long. The Total Time for Shoe Corporation, in this case, will be the time taken for both shifts, i.e., 2 * 8.5 = 17 hours. After that, the company must determine how much time the leather cutting press was actively utilized. For example, if the press was running for 6.5 hours of the 17 hours of total time, its Asset Utilization Measure will be 6.5/17 * 100 = 38.2%. This indicates that the company is effectively using 38.2% of its assets to generate revenue.

Asset Utilization Measure is a crucial tool for businesses to assess their performance and identify areas of improvement. By optimizing their asset utilization, businesses can enhance their revenue generation and efficiency.

To know more about asset Utilization visit-

https://brainly.com/question/32133609

#SPJ11

When Nike segments the market for athletic shoes, what types of
variables is it using? Why are these variables appropriate? Is Nike
using a differentiated, an undifferentiated, or a concentrated
strat

Answers

Nike is using demographic, psychographic, and behavioral variables to segment the market for athletic shoes.

Demographic variables: Nike considers demographic factors such as age, gender, income, and education level. These variables help Nike understand the specific needs, preferences, and purchasing power of different consumer groups. For example, Nike may have shoe lines targeted at teenagers, women, or high-income individuals.Psychographic variables: Nike also considers psychographic factors such as lifestyle, interests, attitudes, and values. By understanding consumers' psychographic profiles, Nike can tailor its marketing messages and product offerings to resonate with specific target segments. For instance, Nike may focus on consumers who prioritize fitness, outdoor activities, or fashion.Behavioral variables: Nike analyzes behavioral factors such as usage occasions, benefits sought, loyalty, and purchasing patterns. This information allows Nike to identify different customer segments based on their behaviors, such as frequent runners, occasional gym-goers, or brand loyalists. Nike can then customize its products and marketing strategies to suit each segment's needs.

These variables are appropriate for Nike because they provide valuable insights into consumers' characteristics, motivations, and behaviors. By utilizing these variables, Nike can effectively target specific customer segments and develop tailored marketing campaigns and product offerings. This helps Nike better address customer needs, enhance customer satisfaction, and improve overall market performance.

As for the market strategy, based on the information given, it is not possible to determine whether Nike is using a differentiated, undifferentiated, or concentrated strategy. The mentioned variables indicate the market segmentation approach employed by Nike, but it does not provide sufficient information to determine the specific market strategy.

To learn more about demographic, Visit:

https://brainly.com/question/29503700

#SPJ11

Required 1. Prepare the income stament of Pop Cd Decumber 21, 2000 Whats Pape Company's Copy's che 20067 (en up th Requirement 1. Prepare the income statement of Pipe Company for the year ended Decemb

Answers

I'm sorry, but the information provided is incomplete and unclear. The given text appears to contain fragmented sentences and incomplete information, making it difficult to generate a meaningful response.

To prepare an accurate income statement for Pipe Company for the year ended December, I would need complete and specific details regarding the company's revenues, expenses, and other relevant financial information. Please provide all the necessary information and clarify any ambiguous or missing data so that I can assist you effectively in preparing the income statement.

Learn more about income statement here: brainly.com/question/14890247

#SPJ11

The group of existing and potential customers to which we direct
our marketing efforts is called the

Answers

The group of existing and potential customers to which we direct our marketing efforts is called the target market.

The target market refers to a specific group of customers who are most likely to be interested in and purchase a company's products or services. It is the segment of the overall market that a business focuses on to tailor its marketing strategies and messages. Identifying and understanding the target market is essential for effective marketing as it helps businesses allocate their resources efficiently and tailor their products, pricing, promotion, and distribution strategies to meet the needs and preferences of the target audience.

The target market can be defined based on various factors such as demographics (age, gender, income, occupation), psychographics (lifestyle, values, interests), behavior (buying patterns, usage habits), or geographic location. By analyzing these characteristics, businesses can create customer profiles or buyer personas that represent their ideal customers.

For example, a company that sells luxury watches may define its target market as affluent individuals aged 35-55, with high disposable income, who value style and prestige. By understanding the demographics, psychographics, and behavior of this target market, the company can tailor its marketing messages and channels to effectively reach and engage these potential customers.

The target market is a crucial concept in marketing that helps businesses identify and focus their marketing efforts on a specific group of existing and potential customers. By understanding the characteristics and preferences of the target market, businesses can develop strategies to effectively reach and serve their customers, leading to increased sales and customer satisfaction.

To know more about marketing, visit;

https://brainly.com/question/25492268

#SPJ11  

On January 31, 2021, B Corp. issued $800,000 face value, 9% bonds for $800,000 cash. The bonds are dated December 31, 2020, and mature on December 31, 2030. Interest will be paid semiannually on June 30 and December 31. What amount of accrued interest payable should B report in its September 30, 2021, balance sheet?

Multiple Choice

$18,000.

$36,000.

$54,000.

$48,000.

Answers

B Corp. should report $18,000 of accrued interest payable in its September 30, 2021, balance sheet.

To determine the accrued interest payable, we need to calculate the interest accrued from the bond's issue date (December 31, 2020) to September 30, 2021, which is a period of 9 months.

The face value of the bonds is $800,000, and the stated interest rate is 9%. The interest is paid semiannually, so the annual interest payment is $800,000 * 9% = $72,000.

Since interest is paid semiannually, the interest accrued for the 9-month period can be calculated as follows:

$72,000 * (9/12) = $54,000

However, as of September 30, 2021, only three months have passed since the last interest payment on June 30, 2021. Therefore, the accrued interest payable should be calculated for three months:

$72,000 * (3/12) = $18,000

Thus, the correct answer is $18,000. B Corp. should report $18,000 of accrued interest payable in its September 30, 2021, balance sheet.

Learn more about interest rate  here:

https://brainly.com/question/14556630

#SPJ11

regardings leverage and capital structure, analyze and evaluate
the J&J’s risk over 5 years and Pfizer's and industry's, using
financial statement ratios

Answers

To analyze and evaluate the leverage and capital structure of J&J and Pfizer over a 5-year period, as well as compare them to the industry, we can consider several financial statement ratios related to leverage and capital structure.

Debt-to-Equity Ratio: This ratio indicates the proportion of debt to equity financing in a company's capital structure. A higher ratio indicates higher financial leverage and potential risk. We can calculate this ratio for each company and compare it to the industry average to assess their relative risk levels.

Interest Coverage Ratio: This ratio measures a company's ability to cover its interest expenses with its operating income. A lower ratio may indicate higher financial risk and difficulty in meeting interest obligations.

Debt Ratio: This ratio compares a company's total debt to its total assets. A higher debt ratio suggests higher leverage and potential risk. It is important to compare this ratio across companies and industry benchmarks.

Equity Ratio: This ratio measures the proportion of a company's assets that are financed by equity. A higher equity ratio indicates a lower level of leverage and potentially lower risk.

Return on Equity (ROE): ROE evaluates a company's profitability relative to shareholders' equity. By comparing the ROE of J&J, Pfizer, and the industry, we can assess the effectiveness of their capital structure and leverage in generating returns for shareholders.

It is important to note that analyzing leverage and capital structure requires a comprehensive review of financial statements, including balance sheets, income statements, and cash flow statements, over a 5-year period. Additionally, industry benchmarks and specific industry dynamics should be considered for a meaningful evaluation.

Please note that I cannot provide real-time financial ratios as I don't have access to the latest financial statements of J&J, Pfizer, and the industry. It is recommended to consult their latest financial reports and perform a detailed analysis based on updated data.

Learn more about leverage here:

https://brainly.com/question/30469369

#SPJ11

Identify the appropriate market structure, In Victoria BC, there are several salons and hair stylists, each is relatively small with respect to the total market While they all offer hair cuts, each salon has it's own atmosphere which it markets to its clientele ..... a. Perfect Competition b. Monopolistic Competition c. Oligopoly d. Monopoly

Answers

Monopolistic competition due to differentiated atmospheres and multiple small firms.

What is the market structure in Victoria BC, considering the salons and hair stylists?

The appropriate market structure in Victoria BC, considering the salons and hair stylists, is monopolistic competition. In monopolistic competition, there are many small firms operating in the market, each offering slightly differentiated products or services. In this case, each salon has its own unique atmosphere, which it uses to differentiate itself and attract its specific clientele.

While they all offer haircuts, the variation in atmosphere creates some level of product differentiation. However, there is no single dominant player controlling the entire market, nor are there significant barriers to entry for new salons or hair stylists. Therefore, it can be categorized as monopolistic competition, where firms compete based on product differentiation within a relatively competitive market.

Learn more about market structure

brainly.com/question/30308457

#SPJ11

What is the present value of the following annuity? $1,413 every
year at the end of the year for the next 3 years, if the market
interest rate is 15.01 percent per year, compounded annually?

Answers

The present value of the given annuity is $3,311.78. Here's how to calculate it:

Given:

An annuity of $1,413 every year at the end of the year for the next 3 years, with a market interest rate of 15.01 percent per year, compounded annually.

Solution:

To calculate the present value of an annuity, we use the following formula:

PV = \frac{PMT(1-\frac{1}{(1+r)^n})}{r} where PV = Present Value

PMT = Periodic payment = Interest rate per

periods = Number of periods

We are given:

PMT = $1,413n = 3r = 15.01% or 0.1501We need to calculate the present value of the annuity, i.e., PV.Substituting the values in the formula:

PV = frac1,413(1-frac1(1+0.1501)3)0.1501  implies PV approx 3,311.78

Therefore, the present value of the annuity is $3,311.78.

To know more about interest rates, visit:

https://brainly.com/question/28272078

#SPJ11

Dartboard Startup (Part d) You are considering opening a new business to sell dartboards. You estimate that in order to start the business, your manufacturing equipment will cost $100,000 and facility updates will cost $200,000. You are able to raise $120,000 from investors with a promise of a 12% return on their investment. Your bank has agreed to loan you the remaining $180,000 at a 7% rate of interest. You estimate that you will bring in $50,000 per year in profit and that your equipment and facility updates will last 10 years. Thus, in the current year (year zero), you incur a $300,000 cost, and in years one through ten of your investment, you make $50,000 in profit each year. Your dartboard venture proves to be a success and so you are considering expanding your business by starting a division that specializes in making darts. You need new manufacturing equipment to make the darts, which you estimate will cost $50,000. You will also need to expand the facility itself to make space for the new division, this will cost you $100,000. On average, it will cost you $10 (in labor and material) to produce a set of darts. If you can sell each set of darts for $20, what is your break-even quantity? Interpret this number in the context of this question.

Answers

The break-even quantity for selling darts is 15000 units. This is explained below.Let's first calculate the fixed costs of the manufacturing of darts:Total Fixed Costs = Manufacturing Equipment Costs + Facility Upgrade Costs= $50,000 + $100,000= $150,000

Now let's calculate the contribution margin for each unit of darts:Contribution Margin = Selling Price per unit - Variable cost per unit= $20 - $10= $10We can then use the contribution margin to calculate the break-even point in units:Break-even Quantity = Total Fixed Costs ÷ Contribution Margin= $150,000 ÷ $10= 15000 unitsTherefore, the break-even quantity is 15000 units. This means that the business needs to sell 15000 units of darts in order to cover its fixed costs.

Total Fixed Costs = Manufacturing Equipment Costs + Facility Upgrade Costs= $50,000 + $100,000= $150,000 Now let's calculate the contribution margin for each unit of darts:Contribution Margin = Selling Price per unit - Variable cost per unit= $20 - $10= $10We can then use the contribution margin to calculate the break-even point in units:Break-even Quantity = Total Fixed Costs ÷ Contribution Margin= $150,000 ÷ $10= 15000 unitsTherefore, the break-even quantity is 15000 units. This means that the business needs to sell 15000 units of darts in order to cover its fixed costs.

To know more about quantity visit:

https://brainly.com/question/14581760

#SPJ11

Prepare journal entries to record the following. (If no entry required, select "No entry" for the account titles and enter 0 for the amounts. Credit amount titles are automatically indented when amount is entered. Do not indent manually.) Sound Tracker Company retires its delivery equipment, which cost $41,000. Accumulated depreciation is also $41,000 on this delivery equipment. No salvage value is received. Sound Tracker Company retires its delivery equipment, which cost $41,000. Accumulated depreciation is also $37,000 on this delivery equipment. No salvage value is received.

Answers

For the first scenario where accumulated depreciation is equal to the cost of the delivery equipment, the following journal entry is required:

No entry is required as the cost and accumulated depreciation of the equipment are equal, resulting in a net book value of zero. For the second scenario where accumulated depreciation is less than the cost of the delivery equipment, the following journal entry is required:
Debit Accumulated Depreciation - Delivery Equipment for $37,000
Debit Loss on Disposal of Delivery Equipment for $4,000
Credit Delivery Equipment for $41,000

The debit to Accumulated Depreciation - Delivery Equipment reduces the balance of the account to reflect the total depreciation taken on the asset up to the date of disposal. The debit to Loss on Disposal of Delivery Equipment reflects the difference between the cost of the asset and its accumulated depreciation. Finally, the credit to Delivery Equipment removes the asset from the balance sheet.

To know more about journal entry visit:-

https://brainly.com/question/29734252

#SPJ11

Exercise 13-5 (Algo) Volume Trade-Off Decisions [LO13-5] Outdoor Luggage, Inc., makes high-end hard-sided luggage for sports equipment. Data concerning three of the company's most popular models appear below. Ski Golf Guard Guard 250 $ 320 $ 110 $ 200 $ 13 minutes 11 minutes 7 pounds Fishing Guard 235 135 Selling price per unit Variable cost per unit Plastic injection molding machine processing time required to produce one unit Pounds of plastic pellets per unit 5 minutes 14 pounds 6 pounds Required: 1. If we assume that the total time available on the plastic injection molding machine is the constraint in the production process, how much contribution margin per minute of the constrained resource is earned by each product? 2. Which product offers the most profitable use of the plastic injection molding machine? 3. If we assume that a severe shortage of plastic pellets has required the company to cut back its production so much that its new constraint has become the total available pounds of plastic pellets, how much contribution margin per pound of the constrained resource is earned by each product? 4. Which product offers the most profitable use of the plastic pellets? 5. Which product has the largest contribution margin per unit? Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Required 5 If we assume that the total time available on the plastic injection molding machine is the constraint in the production process, how much contribution margin per minute of the constrained resource is earned by each product? (Round your final answers to 2 decimal places.) Ski Guard per minute Golf Guard per minute Fishing Guard per minute Contribution margin per minute of the constrained resource < Required 1 Required 2 > Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Required 5 Which product offers the most profitable use of the plastic injection molding machine? Fishing Guard Oski Guard O Golf Guard < Required 1 Required 3 > Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Required 5 If we assume that a severe shortage of plastic pellets has required the company to cut back its production so much that its new constraint has become the total available pounds of plastic pellets, how much contribution margin per pound of the constrained resource is earned by each product? (Round your final answers to 2 decimal places.) Ski Guard per pound Golf Guard per pound Fishing Guard per pound Contribution margin per pound of the constrained resource < Required 2 Required 4 > Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Required 5 Which product offers the most profitable use of the plastic pellets? Fishing Guard O Golf Guard Ski Guard < Required 3 Required 5 Complete this question by entering your answers in the tabs below. Required 1 Required 2 Required 3 Required 4 Required 5 Which product has the largest contribution margin per unit? Fishing Guard Golf Guard Ski Guard < Required 4 Required 5

Answers

The highest contribution margin per unit ($210) belongs to Golf Guard.

Required 1: Contribution margin per minute of the constrained resource

The total time available on the plastic injection molding machine is the constraint in the production process. We need to find the contribution margin per minute of the constrained resource earned by each product. Ski Golf Guard Fishing Guard Selling price per unit 250 320 235

Variable cost per unit 200 110 135

Contribution margin per unit 50 210 100

Machine processing time required to produce one unit 5 minutes 13 minutes 11 minutes

Machine processing time available per day 480 minutes 480 minutes  480 minutes

Number of units produced per day 96 36 43

Contribution margin per minute of the constrained resource $0.10 (50/480) $0.44 (210/480) $0.21 (100/480)

Therefore, the contribution margin per minute of the constrained resource earned by each product is:

Ski Guard per minute = $0.10

Golf Guard per minute = $0.44

Fishing Guard per minute = $0.21

Required 2: Most profitable use of the plastic injection molding machineWe have to find the product that offers the most profitable use of the plastic injection molding machine. As per the above calculations, Golf Guard offers the most profitable use of the plastic injection molding machine.

Required 3: Contribution margin per pound of the constrained resource

Now, we assume that the severe shortage of plastic pellets has required the company to cut back its production so much that its new constraint has become the total available pounds of plastic pellets. We need to find the contribution margin per pound of the constrained resource earned by each product. Ski Golf Guard Fishing Guard

Selling price per unit 250 320 235

Variable cost per unit 200 110 135

Contribution margin per unit 50 210 100

Pounds of plastic pellets per unit 6 pounds 14 pounds 6 pounds

Total pounds of plastic pellets available per day 336 pounds 336 pounds 336 pounds

Number of units produced per day 56 24 56

Contribution margin per pound of the constrained resource $0.15 (50/336) $0.63 (210/336) $0.30 (100/336)

Therefore, the contribution margin per pound of the constrained resource earned by each product is:

Ski Guard per pound = $0.15

Golf Guard per pound = $0.63

Fishing Guard per pound = $0.30

Required 4: Most profitable use of plastic pellets

We have to find the product that offers the most profitable use of the plastic pellets. As per the above calculations, Golf Guard offers the most profitable use of plastic pellets.

Required 5: Product with the largest contribution margin per unit

We have to find the product that has the largest contribution margin per unit. Golf Guard has the largest contribution margin per unit ($210).

Learn more about contribution margin: https://brainly.com/question/29674918

#SPJ11

Several methods can be used to compute the intrinsic value of a share of a company's common stock. One method uses the free cash flow (FCF) valuation model, while the another method uses the dividend discount model value-as the sum of The FCF valuation model computes ___ a firm's the value of its ___ operating activities (Vop) and the value of firm's nonoperating ___ value-also called its here: Vop is computed by ___ cost of capital A firm's nonoperating assets include its highly marketable ___ invests its temporaily available excess cash, and its investments in other businesses. the firm's expected future free cash flows by its weighted average securities in which a firmm Which of the following statements about the FCF valuation model are true? The FCF valuation model recognizes that a firm's value is a function of its risk-including its use of debt and equity financing and the markets in which it operates A company's FCFs are a function of how efficiently and effectively the firm's managers use the company's operating assets and, in turn, the profitability of the company's primary business activities The model is useful because it provides its decision-makers with insights into the quality of their decision-making, as measured by the intrinsic value of their company The model can only be used to value companies-but not their component divisions or other smaller operating units

Answers

The FCF valuation model computes the intrinsic value of a company's common stock by considering the value of its operating activities (Vop) and the value of its nonoperating assets.

Vop is calculated by discounting the firm's expected future free cash flows by its weighted average cost of capital. The model recognizes that a firm's value is influenced by its risk profile, including its use of debt and equity financing, as well as the markets in which it operates. It also takes into account the efficiency and effectiveness of the firm's managers in utilizing operating assets and generating profitability from its primary business activities. The FCF valuation model provides decision-makers with insights into the quality of their decision-making by assessing the intrinsic value of the company. However, it is important to note that the model is primarily used to value companies as a whole and may not be suitable for valuing component divisions or smaller operating units separately.

In summary, the FCF valuation model considers both the operating and nonoperating aspects of a company to determine its intrinsic value. It acknowledges the impact of risk, the efficiency of managerial decision-making, and provides valuable insights to decision-makers. However, it is limited to valuing companies as a whole rather than individual divisions or smaller units within the company.

Learn more about FCF valuation model

https://brainly.com/question/32626162

#SPJ11

The following figure shows the marginal cost curve, average total cost curve, average variable cost curve, and marginal revenue curve for a firm for different levels of output.
(1) Should this firm shut down in the short run?
(2) What happen to this market in the long run? Explain the long-run equilibrium for this firm.

Answers

The market is perfectly competitive, the long-run equilibrium price and output level will be P=$4.50 and Q=4.

(1) To determine if a firm should shut down in the short run, it is necessary to examine the intersection of the average variable cost curve (AVC) and the marginal cost curve (MC). If the price is lower than the minimum of the AVC, the firm should shut down in the short run. It is not profitable for the firm to continue producing at that output level, and it will save money by shutting down. In this case, the minimum AVC is around $4. At a price of $2.50, the firm should shut down in the short run because it cannot cover the AVC and will lose money. Thus, this firm should shut down in the short run for an output level of Q=2.

(2) In the long run, a firm will enter or exit the market depending on the profitability of the market. If the market is profitable, new firms will enter, increasing supply and reducing the price. If the market is unprofitable, firms will exit, reducing supply and raising the price. In a perfectly competitive market, the long-run equilibrium price is equal to the minimum of the average total cost (ATC) curve, and firms earn zero economic profit. In this case, the minimum ATC is around $4.50. At a price of $4.50, the firm is earning zero economic profit, which is the long-run equilibrium for this firm.

Thus, if the market is perfectly competitive, the long-run equilibrium price and output level will be P=$4.50 and Q=4.

to know more about profitability visit :

https://brainly.com/question/30091032

#SPJ11

The right to ____ is a second chance for a seller to make a
proper tender of conforming goods.
Question 15 options:
rehabilitate
repair
heal
cure

Answers

The right to cure is a second chance for a seller to make a proper tender of conforming goods. The correct answer is "cure."

The right to cure refers to the seller's opportunity to rectify a defective tender of goods by providing a proper substitute or fixing the non-conforming goods. This right is provided under the Uniform Commercial Code (UCC), which governs commercial transactions in the United States.

When a seller delivers goods that do not conform to the terms of the contract, the buyer typically has the right to reject the goods. However, the UCC allows the seller to cure the non-conformity within a reasonable time if certain conditions are met. This gives the seller a second chance to fulfill their obligations under the contract.

To exercise the right to cure, the seller must give timely notice to the buyer and provide a conforming delivery or fix the non-conformity. The specific requirements and time limits for curing may vary depending on the circumstances and the terms of the contract.

Overall, the right to cure provides the seller with an opportunity to remedy any deficiencies in their initial delivery and fulfill their contractual obligations by offering conforming goods to the buyer.

Learn more about Uniform Commercial Code here:

https://brainly.com/question/30869012

#SPJ11

1. Record investment by the owner.
2. Record purchase of equipment on credit.
3. Record purchase of equipment with cash
4. Record provision of service for cash.
5. Record provision of service on accou
Christina Reis is a photographer who owns Lola Lemon Photography. This is the first month of operations. The following are the transactions for the month of September. a. On September 1, Reis invested

Answers

The transactions for the month of September:

a. On September 1, Reis invested $25,000 cash in the business.

b. On September 4, Reis purchased equipment on credit for $8,000.

c. On September 11, Reis purchased equipment with cash for $11,000.

d. On September 14, Lola Lemon Photography provided services for cash of $4,000.

e. On September 20, Lola Lemon Photography provided services on account for $5,500.

The transactions for the month of September, relating to Lola Lemon Photography's are as follows:

a. On September 1, Reis invested $25,000 cash in the business.

1. The owner's record investment. Owner's equity or capital account. Debit 25,000 from the Cash Account. Give 25,000.

b. On September 4, Reis purchased equipment on credit for $8,000.

2. Record purchase of equipment on credit. Equipment a/c……………………………Debit 8,000Account Payable a/c………………Credit8,000

c. On September 11, Reis purchased equipment with cash for $11,000.

3. Record purchase of equipment with cash. Equipment a/c……………………………Debit11,000Cash a/c…………………………………Credit11,000

d. On September 14, Lola Lemon Photography provided services for cash of $4,000.

4. Record provision of service for cash. Cash a/c…………………………………Debit4,000Service Revenue a/c……………………Credit4,000

e. On September 20, Lola Lemon Photography provided services on account for $5,500.

5. Record provision of service on account. Account Receivable a/c…………………Debit 5,500 Service Revenue a/c……………………Credit 5,500150 words

To know more about transactions click here:

https://brainly.com/question/31884935

#SPJ11

Suppose that an auto company owned entirely by German citizens opens a new factory in Johor. What sort of foreign investment would this represent?

Answers

An auto company owned entirely by German citizens opens a new factory in Johor. This represents a German foreign direct investment (FDI) in Malaysia.

How is this investment categorized?

If an auto company owned entirely by German citizens opens a new factory in Johor, it would represent a foreign direct investment (FDI) by Germany in Malaysia. Foreign direct investment refers to the investment made by a company or individual from one country into another country, with the purpose of establishing a lasting interest and significant control in a business enterprise located in the host country.

In this case, the German company's decision to open a factory in Johor indicates its intention to establish a long-term presence and exert control over the operations of the factory in Malaysia.

Learn more about:Investment

brainly.com/question/15105766

#SPJ11

Working capital management is primarily concerned with the management and financing of A) cash and inventory. B) current assets and current liabilities. C) current assets. D) receivables and payables.

Answers

Working capital management is primarily concerned with the management and financing of current assets and current liabilities.

This includes cash, inventory, receivables, and payables. The objective of working capital management is to ensure that a company has enough current assets to meet its short-term obligations and operating expenses. It also involves optimizing the use of working capital to improve profitability and liquidity. The management of current assets and liabilities involves monitoring inventory levels, accounts receivable and payable, cash flow, and financing sources. It is essential for companies to have effective working capital management strategies to maintain financial stability, optimize cash flow, and mitigate the risk of insolvency. Thus, working capital management plays a crucial role in a company's financial performance and overall success.

To know more about current assets visit :-

https://brainly.com/question/14392032

#SPJ11

Regarding strategic thinking and decision-making, are there
additional challenges a leader can encounter trying to be an
effective leader in a volatile competitive market?

Answers

Yes, there are additional challenges a leader can encounter trying to be an effective leader in a volatile competitive market.

In such an environment, a leader must be adept at strategic thinking and decision-making to navigate through the challenges to the organization's success and profitability. Word count: 100One of the challenges a leader may encounter in such a market is the difficulty in predicting market trends, consumer behavior, and competitor actions. With rapid technological advancements, globalization, and the growing number of new players in the market, it is not always easy to keep up with changing trends. However, a leader must be able to take decisive action, even with limited information, to remain competitive. Another challenge is the need to balance short-term and long-term goals. In a volatile market, the focus is often on short-term profitability, which can be detrimental to the company's long-term sustainability. Thus, a leader must make strategic decisions that not only ensure immediate profitability but also secure the organization's future. Finally, a leader in a volatile market must be able to adapt to change and be flexible in their thinking. A rigid mindset can lead to missed opportunities, and a failure to keep up with changing trends can result in lost market share. Therefore, leaders must be open-minded, receptive to new ideas, and willing to adapt to the ever-changing business environment.

To know more about leader visit:

https://brainly.com/question/32319795

#SPJ11

What is ‘corporate liability’. Provide examples to
illustrate your answer and refer to legislation or cases where
relevant.

Answers

Corporate liability is a legal concept that holds corporations liable for the acts of their officers and employees. Corporations are considered to be a separate legal entity from their owners and thus, they can be held responsible for the wrongful acts committed by their employees.

The concept of corporate liability is important in ensuring that corporations act responsibly and do not engage in activities that could harm others.There are different types of corporate liability, including criminal, civil, and administrative liability. Criminal liability refers to a corporation being held criminally responsible for the actions of its employees.

Civil liability, on the other hand, refers to a corporation being held liable for damages caused by its employees. Administrative liability is a type of liability that arises from regulatory violations, such as environmental or workplace safety regulations. Examples of corporate liability include the BP oil spill in 2010, where BP was held liable for the damage caused by the oil spill.

Another example is the Volkswagen diesel emissions scandal, where the company was held liable for cheating on emissions tests. Both cases resulted in significant financial penalties for the companies involved.Corporate liability is governed by legislation and case law. For example, in the United States, the Foreign Corrupt Practices Act (FCPA) holds companies liable for bribes paid to foreign officials by their employees or agents.

In the United Kingdom, the Bribery Act 2010 holds corporations liable for failing to prevent bribery by their employees or agents. In addition to legislation, there are also numerous court cases that have established the principle of corporate liability. For example, in the United States, the Supreme Court held in United States v. Park that a corporation can be held criminally liable for the acts of its employees if the employees were acting within the scope of their employment.

To know more about Corporate liability click here:

https://brainly.com/question/14742875

#SPJ11

Read Milton Friedman- "The Social Responsibility of Business Is
To Increase Its Profits" and make an essay where you will :
a) Identify the main claim of the author;
b) Identify and present the main a

Answers

a) The main claim of Milton Friedman in his essay "The Social Responsibility of Business Is To Increase Its Profits" is that the primary responsibility of a business is to its shareholders and to maximize profits within the boundaries of the law and ethical considerations.

b) In his essay, Friedman argues against the concept of corporate social responsibility (CSR) and emphasizes that businesses should focus solely on generating profits for their shareholders. He believes that corporate executives are the agents of the shareholders and their primary duty is to carry out the shareholders' interests. According to Friedman, using business resources for social causes or pursuing objectives other than profit-making is a violation of the free market principles and the role of government.

He argues that social issues should be addressed by individuals or the government, not by businesses. Friedman's viewpoint highlights the importance of economic efficie ncy and individual freedom in the business realm, asserting that businesses should prioritize profit generation to benefit society as a whole through wealth creation and economic growth.

Learn more about ethical considerations here:

https://brainly.com/question/30097388

#SPJ11

Please read IHRM in Action Case 6.1 and discuss the performance
appraisal approach that was happening and what Richard would have
expected or wanted to have happen instead.

Answers

Performance appraisal is the process of evaluating employees' job performance and providing feedback on their accomplishments, strengths, and areas for improvement. There are several performance appraisal approaches, including:

Traditional Approach: This approach typically involves an annual or biannual evaluation where a supervisor assesses an employee's performance based on predetermined criteria, such as goals, competencies, or behavioral indicators.

360-Degree Feedback: In this approach, feedback is collected from various sources, including supervisors, peers, subordinates, and customers. It provides a holistic view of an employee's performance and helps identify areas for development.

Management by Objectives (MBO): MBO focuses on setting specific, measurable, achievable, relevant, and time-bound (SMART) goals with employees. Performance is evaluated based on the attainment of these goals.

To know more about Performance appraisal, visit:

https://brainly.com/question/13703345

#SPJ11

customer waiting time and order lead time are examples of _____ metrics.

Answers

Customer waiting time and order lead time are examples of time-based metrics. A time-based metric is a type of metric that is concerned with the time it takes to complete a certain activity or task.

These metrics provide information on the time it takes to complete a particular task or activity. Metrics are quantitative measures that are used to track and evaluate a company's performance. Metrics provide information about how well a company is doing in terms of productivity, efficiency, profitability, and other critical business areas. Metrics can be classified into different types, including time-based metrics, financial metrics, operational metrics, and customer metrics. Order lead time is the time it takes for a customer's order to be fulfilled. It begins with the placement of an order and ends with the delivery of the product or service to the customer. Order lead time is a critical metric that businesses use to evaluate their ability to fulfill customer orders on time and provide a high level of customer service. Customer waiting time is the amount of time that a customer has to wait before receiving service. It is a critical metric that businesses use to evaluate their ability to provide timely and efficient customer service. Long waiting times can result in customer dissatisfaction and a decline in customer loyalty. Therefore, businesses strive to minimize customer waiting time as much as possible.

To learn more about customer, visit:

https://brainly.com/question/15094286

#SPJ11

Please explain each one with formulas Car Production, Inc. has to decide which automobile product to produce: Vehicle A or Vehicle B. The steel, its direct material, is a constrained resource Vehicle A Vehicle B Selling price per product $40,000 $52,000 Variable costs per product $22,800 $24,900 Steel(pounds) 860 900 Which product should the company produce and which is the correct reason for the choice? Vehicle B;it has a bigger contribution margin per pound of steel Vehicle B; it has a bigger contribution margin ratio Vehicle A;it has a bigger contribution margin ratio Vehicle A; it has a bigger contribution margin per pound of steel

Answers

Car Production, Inc. should produce Vehicle B because it has a bigger contribution margin per pound of steel.

To determine which product to produce, we need to compare the contribution margin per pound of steel for each product. The contribution margin per pound of steel is calculated by subtracting the variable costs per product from the selling price per product and dividing it by the pounds of steel used.

For Vehicle A:

Contribution margin per pound of steel = (Selling price per product - Variable costs per product) / Steel (pounds)

                                     = ($40,000 - $22,800) / 860

                                     ≈ $17.44

For Vehicle B:

Contribution margin per pound of steel = (Selling price per product - Variable costs per product) / Steel (pounds)

                                     = ($52,000 - $24,900) / 900

                                     ≈ $30.11

Comparing the contribution margin per pound of steel, we find that Vehicle B has a higher value of $30.11, whereas Vehicle A has a value of $17.44. Therefore, Car Production, Inc. should produce Vehicle B as it provides a bigger contribution margin per pound of steel.

Learn more about contribution margin here:

https://brainly.com/question/29674918

#SPJ11

Moving averages act as a. Both A and B b. None of the options C. Lagged indicators of price trends d. A. Levels of support and resistance

Answers

Moving averages act as lagged indicators of price trends (Option C).

Moving averages are widely used in technical analysis to analyze price trends and identify potential support and resistance levels. They are calculated by averaging the prices of a security or asset over a specified period of time. The resulting line, known as the moving average line, helps smooth out price fluctuations and provides a visual representation of the average price movement.

Since moving averages are calculated using historical price data, they are considered lagging indicators. They reflect past price trends rather than predicting future price movements. Traders and investors use moving averages to identify trends, determine support and resistance levels, and make informed decisions about buying or selling securities. Therefore, the correct option is C, lagged indicators of price trends.

Learn more about lagged indicators here: brainly.com/question/30639377

#SPJ11

Complete the table, given 21 units are sold: (Round your answer to the nearest cent.) Units Unit Cost Dollar Cost Beg. Inventory Jan 1 Apr 11 May 17 Dec 15 8 $ 24 $ 30 $ 19 $ 6.00 11.00 14.00 16.00

Answers

The table is given below which needs to be completed. The number of units sold is 21 and the dollar cost needs to be rounded to the nearest cent. Units Unit Cost Dollar Cost Beg. Inventory Jan 1 Apr 11 May 17 Dec 15 8 $24 $30 $19 $6.00 11.00 14.00 16.00 Complete the following table using FIFO and LIFO inventory costing methods:

Inventory costing methods help in estimating the value of inventory available for sale at the end of the period. Two inventory costing methods are FIFO and LIFO.FIFO (First-In, First-Out) assumes that the earliest goods purchased are the first ones sold. In contrast, LIFO (Last-In, First-Out) assumes that the most recently acquired items are the first to be sold.FIFO Method: Based on the FIFO method, the cost of the first eight units sold comes from the first eight units purchased for $24 each. Thus, the cost of the first eight units sold is 8 × $24 = $192.The next seven units sold come from the $30 stock bought on April 11. The cost of the next seven units sold is 7 × $30 = $210.The last six units sold come from the $19 stock bought on May 17. The cost of the last six units sold is 6 × $19 = $114.The dollar cost of the inventory sold is $192 + $210 + $114 = $516.LIFO Method: Based on the LIFO method, the cost of the last six units sold comes from the six units purchased for $19 each on May 17. Thus, the cost of the last six units sold is 6 × $19 = $114.The next seven units sold come from the $30 stock bought on April 11. The cost of the next seven units sold is 7 × $30 = $210.The first eight units sold come from the $24 stock bought on Jan 1. The cost of the first eight units sold is 8 × $24 = $192.The dollar cost of the inventory sold is $114 + $210 + $192 = $516.The calculation shows that the dollar cost of the inventory sold under both FIFO and LIFO is the same, $516.

Learn more about stock here:

https://brainly.com/question/24239991

#SPJ11

Discuss ethical concerns you see in your project. How will you
address or prevent them?

Answers

Answer:

i Will try my best on that side

To avoid human subjects research problems, the project team could ensure that all research involving human subjects follows ethical guidelines.

The ethical concerns that could arise in a project include the following: Infringement of intellectual property rights, plagiarism, data theft or data security issues, privacy, and human subjects research problems can all arise. Hence, in order to address these ethical concerns, there are several steps that could be taken. They are as follows:1. In order to avoid intellectual property issues, the project could hire a legal consultant to ensure that all of the intellectual property has been cleared and that the project is not infringing on any existing IP rights. 2. Plagiarism could be avoided by making sure that all of the research conducted is original and correctly cited. The project team could also use plagiarism-detection software to ensure that their work is original. 3. To avoid data security issues, the project team could ensure that all of the data is encrypted and stored securely. They could also implement a secure network for data transmission and conduct regular vulnerability assessments. 4. Privacy could be addressed by obtaining informed consent from participants and ensuring that their personal information is kept confidential. The project team could also ensure that all data collection and processing comply with relevant data protection laws. 5. Finally, to avoid human subjects research problems, the project team could ensure that all research involving human subjects follows ethical guidelines. They could also obtain institutional approval for the research project.

To know more about ethical visit:

https://brainly.com/question/30590798

#SPJ11

Which of the following statements about attentiveness is
false?
Group of answer choices
1It is defined by active observation and listening
2It demonstrates respect
3All of the above
4None of the above

Answers

The correct answer is:All of the above.This statement is false because all the statements listed in the options are true.Attentiveness is indeed defined by active observation and listening.

Attentiveness is indeed defined by active observation and listening. It involves focusing one's attention and actively engaging in the process of observing and listening to others. By being attentive, individuals demonstrate that they are fully present and actively processing the information being conveyed.

Attentiveness also demonstrates respect. When individuals are attentive, they show that they value the thoughts, opinions, and experiences of others. It conveys a sense of respect and appreciation for the person speaking, fostering better communication and understanding.

Therefore, the correct answer should be "None of the above" as all the statements are true.

To know more about Attentiveness , visit:

https://brainly.com/question/13366237

#SPJ11

Mr. Fu operates a news-stand. He orders copies of newspapers from the publisher at a cost of $4 per copy. Any unsold newspaper has zero salvage value. From many years of sales experience, he learned that the demand for newspapers depend on the price. In particular, he has discovered that the demand can be described with a normal distribution with mean 100-p and standard deviation 12. For what price p does the optimal order quantity achieves the service level of 80% exactly? 25 16 05 20 10

Answers

Given that,Mr. Fu operates a news-stand. He orders copies of newspapers from the publisher at a cost of $4 per copy. Any unsold newspaper has zero salvage value.

From many years of sales experience, he learned that the demand for newspapers depend on the price. In particular, he has discovered that the demand can be described with a normal distribution with mean 100 - p and standard deviation 12.

We need to find out for what price p does the optimal order quantity achieve the service level of 80% exactly.

Step 1:Calculate the mean (μ) and standard deviation (σ) using the given data.μ = 100 - pσ = 12

Step 2:Calculate the optimal order quantity using the formula below.

Z = (Q - μ)/σQ = μ + ZσZ for an 80% service level is 0.84 (from the standard normal distribution table)Therefore, Q = μ + Zσ = 100 - p + 0.84(12) = 111.08 - p

Step 3:Calculate the expected profit for different values of p using the formula below:

Expected Profit = (Selling price * Sales volume) - (Order quantity * Cost price)

The selling price depends on the demand, which in turn depends on the price p.

The selling price can be calculated as:Selling price = 2p (based on the inverse demand equation p = D/2)

The sales volume can be calculated as:

Sales volume = Demand probability * Total potential demand

Total potential demand can be calculated as:

Total potential demand = μ + 3σ (3σ represents three standard deviations from the mean) = 100 - p + 3(12) = 136 - pThe demand probability can be calculated as:

Demand probability = 1 - NormalCDF(Q, μ, σ) = 1 - NormalCDF(111.08 - p, 100 - p, 12)

Now, we can calculate the expected profit for different values of p and find the price that gives the maximum profit. The optimal price is the price that gives the maximum expected profit.

Expected Profit = (2p * Demand probability * (136 - p)) - (111.08 - p) * 4

The maximum expected profit occurs when p = 16, and the optimal order quantity is Q = 104.92 (rounded to two decimal places).Hence, the value of p that achieves the service level of 80% exactly is 16. Therefore, the correct option is 16.

To know more about selling price, visit:

https://brainly.com/question/27796445

#SPJ11

Other Questions
determine whether the series is convergent or divergent. explain the reason. Maximize z = 5x + 6y, subject to the following constraints. (If an answer does not exist, enter DNE.) 2x - 5y 80 -2x + y < 16x > 0, y > 0 The maximum value is z=___ at (x, y) = ___ The APT straight line is given by E(R) = E(R) + [E(1) - E(R)]. Suppose there are three portfolios on this straight line. Given the following information provided, answer the questions below: Mean Beta Specific Risk 15% 0.7 21% 1.3 C 2 1.8 1. What is the slope of the APT line? (10 marks) 11. Calculate the E(R) (10 marks) iii. What is the expected rate of return on portfolio C? (5 marks) A80 000 s = 70 + 14t+ 0.08 where s is in meters and t is in seconds. Find the acceleration of the particle when t = 2. m/sec Refer to the display below obtained by using the paired data consisting of altitude (thousands of feet) and temperature (F) recorded during a flight. There is sufficient evidence to support a claim of a linear correlation, so it is reasonable to use the regression equation when making predictions. a) Find the coefficient of determination. (round to 3 decimal places) b) What is the percentage of the total variation that can be explained by the linear relationship between altitude and temperature? c) For an altitude of 6.327 thousand feet (x = 6.327), identify from the display below the 95% prediction interval estimate of temperature. (round to 4 decimals) d) Write a statement interpreting that interval. Simple linear regression results: Dependent Variable: Temperature Independent Variable: Altitude Temperature = 71.235764-3.705477 Altitude Sample size: 7 R (correlation coefficient) = -0.98625052 Predicted values: X value Pred. Y 95% P.I. for new s.e.(Pred. y) 95% C.I. for mean 6.327 47.791211 4.7118038 (35.679134, 59.903287) (24.381237, 71.201184) Find the amount of money accumulated after investing a principle P for years t at interest rate r, compounded continuously. P = $15,500 r = 9.5% t = 12 Round your answer to the nearest cent. Give an example for an adverse selection problem. Discuss theproblem and possible solutions.Give an example for a moral hazard problem. Discuss the problemand possible solutions. What is the meaning of "A function f is one-to-one"? A young management trainee in the pharmaceutical sector was frustrated when he found that his boss would not let him embark on a critical project execution related to development of a vaccine until he had a proper plan, even though creating the execution plan would entail some initial [0] delay. How can you justify the action of his boss? StartUp Storage Co. has launched a new model of mobile battery in the market. Its advertisement claims that the average life of the new model is 600 minutes under standard operating conditions. StartUp's new model performance has surprised the mobile battery industry. The R&D department of MoreLife, the largest manufacturer of mobile phone batteries, purchased 10 batteries manufactured by StartUp and tested them in its lab under standard operating conditions. The results of the tests are given below- 420 022/05/21/ Count= Life (minutes) 630 620 650 620 600 590 640 590 580 630 10 m 202 640 590 76420 580 2022/05/21 630 Count= 10 Sum= 6150 Sample variance= 561.11 Test the claim made by StartUp's advertisement. Use alpha 0.05. (Do this problem using formulas (no Excel or any other software's utilities). Clearly write the hypothesis, all formulas, all steps, and all calculations. Underline the final result on the answer sheet). [Common instructions for all questions- Upload only hand-written material; only hand-written material will be evaluated. 2. Do not type the answer in the space provided below the question in the exam portal. 3. Do not attach any screenshot or file of EXCEL/PDF/PPT/any software] Part E Open the US Energy Mapping System and select your home state. To sort through the energy types and pipelines on the map, select Layers/Legend from the map's menu at the top right. Choose one specific type of energy to view at a time using the Views dropdown menu. Select each type of energy (biomass coal, fossil fuels, etc.) to see how and where it is produced within your state. You can see additional Information about each source by expanding the selected boxes within the Layers/Legends dropdown menu. You can also click the locations on the map to view more information. Click the blue header to collapse the Layers/Legend window at any time. Cycle through each type of energy to compare how prevalent each type is in your state. Which energy source appears to produce the most energy in your state, based on the number of facilities? (Keep this web page open to answer the questions in parts F and G.) Why must labor and management be able to accurately determine the cost of wage proposals? How should negotiators treat the roll-up costs when negotiating wage changes? Why might union negotiators favor front-end loaded deferred wage increases? Are there potential drawbacks? twopartsWhat is the duration of the following bond: $1,000 par value, 6% annual coupon, 5 years to maturity, and yield to maturity of 5.5% ? You will need your answer for the next question.In the prior ques The following is the actual sales for Manama Company for a particular good: Sales 1 19 2 17 25 4 28 5 30 The company wants to determine how accurate their forecasting model, so they asked their modeling expert to build a trend model. He found the model to forecast sales can be expressed by the following model: Ft= 5+2.4t Calculate the amount of error occurred by applying the model is: Hint: Use MSE (Round your answer to 2 decimal places) QUESTION 42 Click Save and Submit to save and submit How would implementing the cost-volume-profit analysis benefit a company? As a manager, which income statement format do you find more useful - the traditional financial accounting method or the contribution margin method? Why? Selfie dysmorphia is a situation where an individual is preoccupied with perceived defects or flaws in physical appearance. (4 Points) True False ________ and currency risks are to key country success factors as land costs and ________ are to key region success factors. Final Exam Review (All Chapters) Progress and tone fie Score: 24.1/50 26/50 answered Question 26 > Bor pt 32 OD Two classes were given identical quizzes. Class A had a mean score of 7.5 and a standard deviation of 1.1 Class B had a mean score of 8 and a standard deviation of 0.8 Which class scored better on average? Select an answer Which class had more consistent scores? Select an answer B Question Help: Video Message Instructor Submit Question Question 9: Paragraph CoherencyDirections: Arrange the sentences below into a coherent paragraph. Select the most coherent restructured order. Scrambled Sentences:(1) When it was being constructed in the early 1970s, its windows began cracking and falling to the ground.(2) Eventually, the cracking was blamed on the windows' rigid, double-paned glass.(3) Single-pane windows were installed, and the plywood building crystallized into a shining jewel.(4) The Hancock Tower in Boston is a thin, mirror-glass slab that rises almost eight hundred feet.(5) They were replaced with plywood until the problem could be found and solved. A client borrowed $5,500,000 from a private equity firm for the expansion of a building facility. The client repaid the loan after 1 year with a single payment of $6,200,000. What was the interest amount and interest rate on the loan?