Integrity and Confidentiality ethical issues has been violated when He completed his most recent professional development course in 2010.
When a choice, action, or circumstance goes against the organization's or society's ethical issues, there is an ethical problem in business. Due to the possibility that their acts would be questioned from a moral standpoint, both organisations and people may become entangled in ethical concerns. A moral conundrum that has to be handled within an organisation is what is referred to as an ethical challenge in the workplace. The five main categories of ethical concerns in the workplace include unethical accounting, harassment, health and safety, technology, privacy, social media, and discrimination. When you are faced with a decision where each option is morally repugnant in a significant sense, these situations are referred to be ethical dilemmas.
learn more about ethical issues here
https://brainly.com/question/13529138
#SPJ4
If the central bank raises the required reserve ratio, the money multiplier and the money supply will change in which of the following ways?
Increased reserve ratios lower the amount of deposits that can be sustained by a given level of reserves, which, in the absence of additional measures, lowers the money supply and increases the cost of credit.
What Are Reserve Requirements?The requirement to keep a percentage of deposits as reserves applies to banks and other depository institutions (savings institutions, credit unions, and foreign banking organizations). Reserves may be held by depository institutions in the form of bank deposits or cash in the vault. 2 Depository institutions were mandated to retain a reserve requirement of 3 percent against their first $42.8 million in net transaction accounts (demand and other checkable deposits) and 10 percent against their net transaction accounts over $42.8 million as of December 28, 2000. 3 Time and savings deposit deposits currently do not have a reserve requirement. According to the Federal Reserve Board's H.3 Statistical Release, the total amount of necessary reserves for depository institutions as of June 2001 was $36.9 billion, as shown in the table.To Learn more About reserves, refer TO:
https://brainly.com/question/28114915
#SPJ4
Which of the following statements are accurate regarding the importance of learning about a company's mission and vision statements before a job interview? (select all that apply)- these statements tell you why the company exists- these statements tell you what the company wants to achieve over time- you will be a better fit for a company if you support their mission and vision statements
In given question statement "you will be a better fit for a company if you support their mission and vision statements" is correct.
What does "company" mean?A company is a legal body created by a group of people to manage a commercial or industrial venture. Depending on the corporate legislation of its jurisdiction, a business may be set up in a variety of ways for tax and financial liability purposes. Stephen Sondheim wrote the music and lyrics for the musical Company, while George Furth wrote the book. The original 1970 production was nominated for a record-breaking 14 Tony Awards and took home six of them. Company was written in a non-chronological, linear approach.
To know more about company visit:
https://brainly.com/question/29354835
#SPJ4
Understanding the nature of leadership has proved to be quite the challenge for practitioners and researchers because:
A. Very little research has been done.
B. It has not received much attention.
C. It is too simplistic in nature.
D. It is a highly valued phenomenon that is very complex.
E. Its appeal is limited to academics and scholars.
Answer: C: it is too simplistic in nature
______organizations are characterized of many layers of management and function with well-defined rules and procedures. A) Bureaucratic B) Ordered C) Matrix D) Inverted
A) Bureaucratic organizations are characterized of many layers of management and function with well-defined rules and procedures.
Bureaucratic Organization:
A bureaucracy is a form of management with a pyramidal command structure. The bureaucracy is highly organized and very formal in its way of working. Organizational charts typically exist in all departments, and decision-making is an organized process. A strict command and control system is always in place. The bureaucracy must be orderly, fair and highly efficient.
The bureaucratic organizational structure has different levels of management, from senior management to regional managers, department heads, and shift supervisors who work alongside frontline employees. As such, authority is centralized at the top and information typically flows top-down. For example, senior management may implement a new policy that requires all overtime hours to be approved by management before employees actually work. The new policy extends from executive desks to frontline employees.
Characteristics of the Bureaucracy:The basic characteristics of the bureaucracy are as follows.
Rules and professional responsibilities are written and clearly defined.A clear hierarchy of power is concentrated in a few senior management positions.Official appointments and promotions are Employed based on skill and knowledge rather than preference or luckSalary tied to pay scale system.Bureaucrats unable or unwilling to adapt quickly to changing circumstances.Micro- control is commonLearn more about Bureaucratic Organization:
https://brainly.com/question/3723376
#SPJ4
ttrue/faalse. because it is possible for a single real estate firm or an individual real estate professional to perform all the services and handle all classes of property, few firms and professionals specialize in any one type.
As a result of devotion to a high standard of moral behaviour in business partnerships, the brand "REALTOR®" now signifies competence, justice, and high integrity.
How would one define competence?
The degree of competence of a person is defined as their capacity to utilise their education, experience, skills, and knowledge to do a task in a safe manner. Additional factors like attitude and physical prowess can also have an impact on competence. You need specific methods of thinking or acting to be successful at a task or job. For instance, if you work in sales, your capacity to gain the confidence of clients will affect the volume of business you bring in. To be successful in that role, you'll need some degree of credibility-building abilities.
Know more about integrity visit:
https://brainly.com/question/22008756
#SPJ4
if both demand and supply increase, there will be an increase in the equilibrium output, but the effect on price cannot be determined.
The shift in the equilibrium output can be calculated, but the shift in the equilibrium price cannot if demand and supply shift in the same way.
What are examples and demand?Demand is just a consumer's desire to buy products and services immediately and to pay the price associated with them. Demand can be defined as the quantity of things that consumers are prepared and willing to purchase at various prices within a specific time frame. Demand in economics refers to a consumer's readiness to pay a particular price for goods and services as well as their desire to buy them. Demand for a good or service typically declines when its price goes up.
To know more about demand visit:
https://brainly.com/question/29703449
#SPJ4
william howard taft became the first president to hold which of the following positions in the federal government?
The only person to hold both of these positions was William Howard Taft, who was elected the 27th President of the United States (1909–1913) and then the tenth Chief Justice of the United States (1921–1930).
Who was William Howard Taft?William Howard Taft (September 15, 1857 – March 8, 1930), the only person to occupy both offices, was the tenth Chief Justice of the United States (1921–1930) and the 27th President of the United States (1909–1913).
Theodore Roosevelt's chosen successor Taft was elected president in 1908, but Wilson beat him for reelection in 1912 when Roosevelt split the Republican vote by running as a third-party candidate.
Taft was appointed chief justice by President Warren G. Harding in 1921, and he served in that capacity up until a month before his passing.
In 1857, Taft was born in Cincinnati, Ohio. Attorney General of the United States and Secretary of War, Alphonso Taft was his father.
Therefore, the only person to hold both of these positions was William Howard Taft, who was elected the 27th President of the United States (1909–1913) and then the tenth Chief Justice of the United States (1921–1930).
Know more about William Howard Taft here:
https://brainly.com/question/26288982
#SPJ4
which of the following is an attack where a program or service is placed on a server to bypass normal security procedures?
A backdoor is a program or service that is placed on a server to bypass normal security procedures. Here option A is the correct answer.
It is often used by attackers to gain unauthorized access to a system or network, steal sensitive information, or perform other malicious activities.
A backdoor is typically installed by exploiting a vulnerability in the server's software or by tricking an administrator into installing it. Backdoors can be hard to detect and remove, making them a serious security threat.
A form of malware known as a backdoor circumvents standard authentication mechanisms to gain access to a system. As a result, resources within an application, such as databases and file servers, are accessible remotely, allowing offenders the opportunity to remotely execute instructions on the system and update malware.
Complete question:
Which of the following is an attack where a program or service is placed on a server to bypass normal security procedures?
A - backdoor
B - a phishing attack
C - SQL injection
D - malware attack
To learn more about backdoor
https://brainly.com/question/19130846
#SPJ4
the uncertainty that exists due to the portion of demand that the supply chain is required to meet is the
The uncertainty that exists due to the portion of demand that the supply chain is required to meet is the implied Demand Uncertainty. Thus, option D is correct.
What is Demand Uncertainty?The external causes that cause demand to suddenly rise or fall are referred to as demand uncertainty. A public health emergency or even a sudden change in the tastes of the clientele might be the root of this predicament. Numerous pieces of software assist businesses in forecasting demand and creating effective production and supply chain plans.
Increased costs are the outcome of demand uncertainty, most frequently in the form of surplus inventory, excess manufacturing capacity, or the utilization of quicker and more expensive modes of delivery.
Demand is the amount of an item that buyers are ready and willing to buy at different prices at a certain moment. The demand curve is another name for the connection between price and quantity demand.
To learn more about Marketing refer to :
brainly.com/question/29303932
#SPJ4
Cimplete question:
The uncertainty that exists due to the portion of demand that the supply chain is required to meet is the
Select one:
a. rate of strategic uncertainty
b. average forecast error.
c. demand uncertainty
d. implied demand uncertainty
Entities must design and implement Blank 1Blank 1 to ensure that transactions are initiated, captured, recorded and summarized appropriately in the entity's accounting system.
Blank 1: controls, internal controls, or internal control
Entities must design and implement internal controls to ensure that transactions are initiated, captured, recorded, and summarized appropriately in the entity's accounting system.
An accounting system is a collection of processes, procedures, and controls that are used to record and report financial transactions. It is used to capture, classify, and summarize financial data in order to produce financial statements and other reports that provide information on the financial health and performance of a business. The accounting system typically includes software and hardware that are used to input, process, and store financial data, as well as the personnel responsible for maintaining and operating the system. The internal controls within the accounting system are designed to ensure the integrity and accuracy of the financial data by preventing errors, fraud, and misuse of assets.
To know more about transactions please refer: https://brainly.com/question/24730931
#SPJ4
joe, a bookkeeper, works in a cubicle environment and is often called away from his desk. joe doesn't want to sign out of his computer each time he leaves. which of the following are the best solutions for securing joe's workstation? (select two).
Configure the screen saver to require a password and Configure the screen lock to be applied after short period of time.
What are the three things to consider when it comes to physical security?Access control, monitoring, and security testing are considered the three most crucial elements of a physical security strategy by security professionals and collectively they improve the security of your place.When auditing an item, Microsoft employs a system access control list (SACL) to track previous user activity. The rights and access that people and groups have to things are defined by permissions. Files and folders are examples of things to which permissions are applied.Except for one user who is in charge of system maintenance, all users on a Windows desktop are restricted users.To learn more about physical security refer to:
https://brainly.com/question/30295176
#SPJ4
Match the four aspects of Product Design which support the goals of Lean/JIT systems with their definition.
1. Standard parts
2. Modular design
3. Capable production quality
4. Concurrent engineering
The four Product Design characteristics that serve the aims of Lean/JIT systems are correctly aligned with their definitions below.
Product design is defined as the process of thinking, producing, and iterating products that solve user issues or fulfil specific market demands.
Standard components - Fewer parts across product lines reduce procurement and inspection expenses.Design Modularity - Standardized subassemblies (clusters of parts) to ease bills of materials, training, and final product assemblyCapable of producing high-quality results - Manufacturing systems in which product and process design have minimized or eliminated defectsEngineering concurrently - A team method in which each group is involved in product design from the start, rather than sequentially from development through delivery.To learn more about Product Design, Click here:
https://brainly.com/question/26015791
#SPJ4
List 4 ways to improve the following poorly written email:
Dear Buddies,
Hey - make it a super, super fun day today at work. Hey - we've got some new compliance rules. You had better follow them or else something may happen on your next performance review. LOL Just Kidding. Read them however -- they are attached and I don't have time to tell you what top 3 things you need to know about them. But I do know they are super important.
Have fun.
Joe Sr.
Your Boss
concept testing presents a small sample of potential buyers within a trial version of the new product to determine their initial reaction.T/F
False. Concept testing does not presents a small sample of potential buyers within a trial version of the new product to determine their initial reaction.
Concept testing is the method of gauging consumer approval of a new product prior to the release of a product on the market utilizing surveys and occasionally qualitative methodologies. It's crucial to avoid mixing up concept testing with brand testing, advertising testing, and package testing, as is occasionally done. Without the trimmings and puffery typical of advertising, concept testing concentrates on the core concept of the product. Concept testing occurs during the concept generating stage of the new product development process. Concept testing's concept creation phase includes a variety of options. Concepts might occasionally emerge accidentally as a result of technical advancements. Concept generation can also be intentional, as in brainstorming sessions, problem-spotting surveys, and qualitative research. While qualitative research can shed light on a variety of consumer reactions, it is better to leave quantitative concept-test surveys to predict the likelihood that a new idea will succeed.
Learn more about Concept testing here
https://brainly.com/question/24935546
#SPJ4
Examine the photo below that is used to tell a news story. What category of photography could this photo be classified as?
A. tonalism
B. photojournalism
C. photo secession
D. straight photography
The category of photography that this phot can be classified part of is B. photojournalism
What is photojournalism?The dissemination of news using images is referred to as photojournalism. As well as online news sources and microblogging websites, these photos frequently appear in print publications including newspapers and magazines. A picture can quickly improve the story that a news item conveys to its viewers and is said to be worth 1,000 words.
A professional who uses images rather than words to tell tales is known as a photojournalist. They capture images and edit them so they can be arranged to convey events. The subjects that photojournalists cover can range from occurrences or problems in their own local areas to instability in other countries.
This photo is therefore under the category of photojournalism.
Find out more on photojournalism at https://brainly.com/question/20889963
#SPJ1
Answer: photojurnalism
Explanation:
The benefits, described in the text, of using a project management approach to developing information systems include all of the following exceptanswer choicesO providing a common set of tools and controls which provides a common language to compare projects throughout the organizationO the ability to better estimate and control costs and schedules which leads to a more effective conservation of company resourcesO improved communication and status reports leads giving the developers the ability to manage expectations of stakeholdersO competitive advantage for internal developers whose work might have to be outsourced if the quality and cost of their work can be bettered by outside competitionO the coupling of project success to the selection of team members and the skill sets and resources that they bring to the project.
All of the following are advantages of utilizing a project management technique to design information systems, with the exception of the coupling of project success to team member selection and the resources and skill sets they contribute to the project.
Which of the following best sums up the purpose of the project and the intended outcome?The project's product, service, or outcome is described in writing in the project statement of work. The purpose of a project, the issue it will address, and the benefit-cost analysis are all explained in the business case.
What should a project manager do in order to get ready for the scope approval procedure?Establish the approvals that the sponsors must sign off on.
To Know more about project management
https://brainly.com/question/15404120
#SPJ4
crane purchases equipment by paying cash with the equipment dealer for $10,000. the accounts affected for crane are
Equipment and notes payable are the affected accounts for crane.
The sums that a company owes its financiers, including banks and other financial institutions as well as alternative funding sources like friends and family, are represented through long-term obligations known as notes payable. Since they are due after a year, though often within five years, they are regarded as long-term debt. Notes payable are the name given to written promissory notes. Under this arrangement, a borrower receives a specific amount of money from a lender and agrees to repay it with interest over a predetermined period of time. The interest rate may be predetermined for the life of the note or it may change in accordance with the prime rate, which is the interest rate the lender charges its most valuable customers.
To learn more about Notes payable click here
brainly.com/question/28434539
#SPJ4
The primary objective of financial accounting is:
A. To serve the decision-making needs of internal uses
B. To provide financial statements to help external users analyze and interpret an organization's activities
C. To monitor and control company activities
D. To provide information on both the costs and benefits of managing products and services
E. To know what, when and how much to produce
The primary objective of financial accounting is: To provide financial statements to help external users analyze and interpret an organization's activities
Hence, Option B is correct
In double-entry accounting, each effect of a transaction is recorded. The transaction is shown as a credit in one account while being recorded as a debit in another. Debit entries reflect a rise in assets (what you own) and expenses (what you spend) as well as a fall in both. Business transaction recording, classification, summarization, analysis, and reporting are all steps in the systematic process of financial accounting. Identifying a business's profits and losses is the main goal. A true and fair evaluation of a business is provided by financial accounting. As a result, it protects stakeholders' interests.
To learn more about financial accounting here
https://brainly.com/question/20381852
#SPJ4
sharmer company issues 5%, 5-year bonds with a par value of $1,000,000 and semiannual interest payments. on the issue date, the annual market rate for these bonds is 6%. what is the bond's issue (selling) price, assuming the following factors: n= i= Present Value of an Annuity Present value of $1 5 5 % 4.3295 0.7835 10 3 % 8.7521 0.7812 5 6 % 4.2124 0.7473 10 3 % 8.5302 0.7441 Multiple Choice $957,355 $1,000,000 $1,250,000 $786,745 $1,213,255
The bond's issue (selling) price is $957355, which mean option A is correct.
What is selling price?The selling price is used to determine how much it costs to sell an item and can be calculated using the selling price formula. The selling price is the amount paid by the buyer for the product. The actual selling price is the amount of money paid by the buyer to purchase a product or service. This is the cost of goods plus a profit percentage.
If the seller so desires, the selling price can be kept close to the cost price if the buyer does not wish to profit. Determining the selling price is a very delicate issue because it determines the majority of a product's sales.
The bonds issue (selling) price = $1,000,000 × PVIF (3% , 10) + $1,000,000 ×2.5% × PVIFA (3%, 10)
= $1,000,000 × 0.7441 + 25000 × 8.5302 =
= 744100 + 213255 = $957355
Thus, option A is correct.
To learn more about selling price refer to;
brainly.com/question/17134052
#SPJ4
which of these would increase basis? insurance reimbursement for property damage. depreciation. nonbusiness energy credit. legal fees for obtaining a decrease in an assessment levied for local improvements.
Cost of installing utility lines on the property. legal expenses related to defending and perfecting title, impact fees, etc. legal fees incurred in requesting a decrease in an assessment levied against property to fund neighborhood development.
How does one elevate the base?Before determining gain or loss on a sale, exchange, or other dispose of that item, as well as before determining allowable depreciation, you must determine your adjusted basis in the property. When certain events occur while you are the owner, the result is what is known as a "adjusted basis," which can either increase or decrease your basis. Increase your base by considering elements like the cost of improvements that increase the property's value, and decrease it by considering elements like permitted depreciation and insurance payouts for burglary and other losses.
Learn more about depreciation: https://brainly.com/question/15085226
#SPJ4
Which of the following is an example of a change in scope for a project?A. Defects discovered in a deliverableB. Features of a deliverable are changedC. Delay in production of an itemD. Price increase on a resource
Features of a deliverable are changed is an example of a change in scope for a project. Thus, option b. is the correct answer.
What is Scope Change Management?
Do you realise that poorly handling changes to your scope might have disastrous effects on your projects? You must control the project scope as a project manager from planning to execution.
After your original project scope has been authorized, which is carried out at the end of your project charter phase, you must manage, control, and record any modifications to your scope. This is known as scope change management.
Modifying your project scope will have the effect of lengthening project schedules and raising project expenditures. Therefore, since insufficient scope change management might be troublesome, it's imperative to adhere to a formal change management approach, which will be covered in more detail in this course.
To learn more about Scope Change Management
https://brainly.com/question/28177587
#SPJ4
Any agricultural system involving the application of large amounts of capital and/or labor per unit of cultivated land. About 45% of the people of the world are engaged in intensive subsistence agriculture. There are large amounts of food per unit of land. What is it?
A type of subsistence farming where farmers work very hard to get the highest possible harvest from a given piece of land.
What type of farming requires large amounts of labour and capital?Agriculture that is practiced intensively is one that uses a lot of labor and resources in comparison to the available land. Small plots of land are heavily emphasized in intensive farming in order to enhance productivity.In agricultural economics, extensive agriculture refers to a method of crop production that uses little labor and investment relative to the area of land being farmed. The soil's inherent fertility, the topography, the climate, and the availability of water all play a major role in crop output in vast agriculture. Crops grown for personal consumption alone are considered to be a subsistence farming practice. Commercial farming is a type of farming where a farmer raises goods for a profit.To learn more about agriculture refer to :
https://brainly.com/question/28387841
#SPJ4
Dowling Sportswear is considering building a new factory to produce aluminum baseball bats. This project would require an initial cash outlay of $5,500,000 and would generate annual net cash inflows of $1,100,000 per year for 7 years. Calculate the project's NPV using a discount rate of 8 percent.
The NPV of the project is $$2,27,007.0651, which means that the project will generate a net present value of $$2,27,007.0651 for the company if a discount rate of 8 percent is used. This means that the project will provide a positive return on investment and is a viable option for the company to pursue.
What is the project's NPV?Generally, To calculate the project's NPV using a discount rate of 8 percent, we need to use the following formula:
NPV = (Net Cash Inflows / (1 + r)^t) - Initial Cash Outlay
Where:
Net Cash Inflows = $1,100,000 per year for 7 yearsInitial Cash Outlay = $5,500,000 r = 8% (discount rate) t = 7 (number of years)We can calculate the NPV as follows:
NPV = ($1,100,000 / (1 + 0.08)^1) + ($1,100,000 / (1 + 0.08)^2) + ($1,100,000 / (1 + 0.08)^3) + ... + ($1,100,000 / (1 + 0.08)^7) - $5,500,000
NPV = $2,27,007.0651
Read more about the project's NPV
https://brainly.com/question/28590944
#SPJ1
Real estate markets differ from other asset classes by having all of the following characteristics except:local markethigh transaction costssegmented markethomogenous product
Real estate markets differ from other asset classes in that they have all of the following qualities, with the exception of homogeneous product.
Real assets are tangible possessions with inherent value derived from their composition and characteristics. Precious metals, commodities, real estate, land, machinery, and natural resources are examples of real assets. Because they have a relatively low correlation with financial assets like equities and bonds, they are ideal for inclusion in the majority of diversified portfolios.
Assets can be classified as tangible, monetary, or financial. To a business or person, all assets can be said to have economic value. An item is regarded as an asset if its worth can be converted into cash.
Visit here to learn more about Real estate: https://brainly.com/question/29487490
#SPJ4
Suppose that Xtel currently is selling at $30 per share. You buy 600 shares using $12,600 of your own money, borrowing the remainder of the purchase price from your broker. The rate on the margin loan is 10%. a. What is the percentage increase in the net worth of your brokerage account if the price of Xtel immediately changes to (a) $33; (b) $30; (c) $27? Round your answers to 2 decimal places.) a. Percentage gain _____________% b. Percentage gain _____________% c. Percentage gain _____________% b. If the maintenance margin is 30%, how low can Xtel’s price fall before you get a margin call? (Round your answer to 2 decimal places.) Price $ ____________ c. How would your answer to requirement 2 would change if you had financed the initial purchase with only $9,000 of your own money? (Round your answer to 2 decimal places.) Strike price $ ______________ d. What is the rate of return on your margined position (assuming again that you invest $12,600 of your own money) if Xtel is selling after one year at (a) $33; (b) $30; (c) $27? (Negative values should be indicated by a minus sign. Round your answers to 2 decimal places.) a. Rate of return ____________ % b. Rate of return ____________ % c. Rate of return ____________ % e. Continue to assume that a year has passed. How low can Xtel’s price fall before you get a margin call? (Round your answer to 2 decimal places.) Price $______________
Direct costs include the ones listed below. salaries for assembly-line workers. utilized in the frame is glass.
Fixed expenses typically refer to fees that are dependent solely on time rather than the quantity produced or purchased by your business. Lease and hire fees, salary, application costs, insurance, and mortgage repayments are a few examples of constant fees. Some forms of taxes, including enterprise licenses, also are constant levies. In its singular form, "cost" refers to the total of a group, while "fees" refers to every component of that group. The cost of a provider, for instance, "consists of fabric costs and exertions fees." People frequently struggle to understand the difference between "price" and "fees" in everything from crime contracts to budget conversations.
Learn more about Cost here:
https://brainly.com/question/29417589
#SPJ4
TRUE/FALSE. project management software should be used by needs analysts for even very small projects such as the selection of a home pc
Project management software should be used by needs analysts for even very small projects such as the selection of a home PC.
What is Project management software?For even very modest tasks, like choosing a home PC, requirements analysts should use project management software. Vendors seldom contribute to a user requirements assessment study since they are prejudiced toward their own products. The practice of organizing a team's efforts to complete a project within its limits is known as project management. In project documentation that is prepared at the start of the development process, this information is typically described. Budget, time, and scope are the main restrictions. In the broadest sense, project managers are in charge of organizing, planning, and overseeing the completion of a project while making sure that it produces the anticipated outcomes on time, within scope, and on budget.To learn more about Project management software refer to:
https://brainly.com/question/28479912
#SPJ4
which of the following statements represents an advantage of a municipal general obligation bond over a revenue bond?
One advantage of a municipal general obligation bond over a revenue bond is that the issuer of a general obligation bond (usually a municipality) has the power to tax its residents to repay the bond debt.
General obligation bonds are backed by the full faith and credit of the issuer, which means that the issuer (usually a municipality) has the power to tax its residents to repay the bond debt. This means that even if the project financed by the bond does not generate enough revenue to repay the bond debt, the municipality can raise taxes to make up the difference.
Hence the correct statement is "Advantage of a municipal general obligation bond over a revenue bond is that the issuer of a general obligation bond has the power to tax its residents to repay the bond debt."
To know more about bond here
https://brainly.com/question/29433045
#SPJ4
what is brand DNA about Save the children
The brand DNA in save the children has to do with the art that the organization is known by.
What is save the children about?Around the world, Save the Children's work helps save and better the lives of children. When kids need it most, we fight to make sure they have access to school opportunities and child safety services in addition to healthcare, food, and housing.
They are caught up in conflict and calamities that they had nothing to do with causing. They also lack access to an education and other fundamental rights that are owed to them. Better is due to every youngster. We prioritize the needs of the most vulnerable kids while promoting the rights and interests of kids everywhere.
Read more on save the children here: https://brainly.com/question/25217330
#SPJ1
a new no-carb diet is spreading throughout the country, and people are purchasing fewer bread products. in the news, it notes it has been one of the best years for wheat production.
With the new diet, people buy less bread. Recently, carbohydrate-free diets are spreading rapidly across the country.
What is the grain production?
The estimated volume of grain production for 2021-22 is 2.87�low the target of 110 million tons. Currently, about three-quarters of Americans' grain products come from wheat, grown primarily on the Great Plains. China is the world's top wheat producer, with India, Russia, the United States, France, Australia, Canada, Pakistan, Ukraine and Germany completing the top 10. The top wheat producers in India are Uttar Pradesh , Punjab, Haryana, Madhya Pradesh, Rajasthan, Bihar and Gujarat. Facts and figures about India: World trade in wheat is greater than all other crops combined.
In addition to being an important source of strength and energy, wheat provides significant amounts of many essential or health-promoting nutrients, particularly protein, vitamins (especially B vitamins), fiber and phytochemicals.
To learn more about wheat production refers to:
brainly.com/question/11224676
#SPJ4
ken allen, capital budgeting analyst for bally gears, inc., has been asked to evaluate a proposal. the manager of the automotive division believes that replacing the robotics used on the heavy truck gear line will produce total benefits of $560,000 (in today's dollars) over the next 5 years. the existing robotics would produce benefits of $400,000 (also in today's dollars) over that same time period. an initial cash investment of $220,000 would be required to install the new equipment. the manager estimates that the existing robotics can be sold for $70,000. show how ken will apply marginal cost-benefit analysis techniques to determine the following:
a: The marginal (added) BENEFITS of the proposed new robotics.
$560,000 - $400,000 = $160,000
b. The marginal (added) COST of the proposed new robotics.
$220,000 - $70,000 = $150,000
c. The net benefit for the proposed new robotics
profit - cost = net profit
$160,000 - $150,000 = $10,000
d. Ken Allen should encourage companies to replace existing robotics because the net profit is positive
e. Other factors to consider before making a final decision include:
- Whether new robotics requires additional training
-whether even better robotics will be available soon
-What will be the energy consumption of the new robot?
To learn more about marginal cost, here:
https://brainly.com/question/7781429
#SPJ4
Complete question:
Ken Allen, capital budgeting analyst for Bally Gears, Inc. has been asked to evaluate a proposal. The manager of the automotive division believes that replacing the robotics used on the heavy truck gear line will produce total benefits of $560,000 (in today's dollars) over the next five years. The existing robotics would produce benefits of $400,000 (also in today's dollars) over the same time period. An initial cash investment of $220,000 would be required to install the new equipment. The manager estimates that the existing robotics can be sold for $70,000. Show how Ken will apply marginal cost-benefit analysis techniques to determine the following:
a. The marginal (added) BENEFITS of the proposed new robotics
b. The marginal (added) COST of the proposed new robotics
c. The net benefit of the proposed new robotics
d. What should Ken recommend that the company do? Why?
e. What factors besides the costs and benefits should be considered before the final decision is made?
