Of the following, which element has the highest first ionization energy?
Rb
Na
Ca
Sr

The hilum is a small, concave depression on the medial surface of the kidney where structures such as blood vessels and nerves enter and exit the organ.

The renal artery, renal vein, and ureter all enter and exit the kidney at the hilum. These structures are essential for the proper function and maintenance of the kidney.
                                         The hilum is the concave indentation or entry point on the inner surface of the kidney. The three structures that enter and exit the kidney at the hilum are the renal artery, renal vein, and ureter.

                                         The renal artery brings blood to the kidney for filtration, the renal vein carries filtered blood away from the kidney, and the ureter transports urine from the kidney to the bladder.

Learn more about hilum

brainly.com/question/29752205

#SPJ11

LeChatelier's principle applies to all of the options except for (D) the kinetic order of a reaction. It is applicable to (A) the common-ion effect, (B) the buffer equation, (C) titration curves, and (E) the solubility of CaCO3 vs. pH.

LeChatelier's principle states that a system at equilibrium will respond to any stress or disturbance by shifting its equilibrium position in a way that tends to counteract the stress. It applies to chemical equilibria, but not to kinetic order, which describes the rate of a reaction rather than its equilibrium position. However, LeChatelier's principle does apply to (A) the common-ion effect, (B) the buffer equation, (C) titration curves, and (E) the solubility of CaCO3 vs. pH, all of which involve chemical equilibria that can be influenced by changing conditions.

Learn more about LeChatelier's principle here:

https://brainly.com/question/13125507

#SPJ11

The Le Chatelier Principle predicts that increasing the concentration of NH₃ will shift the reaction to the left.

Reaction is the process of responding to an event or stimulus. It can be a physical response such as movement, a mental response such as a thought or emotion, or a combination of both. Reactions can be positive, negative, or neutral, depending on the event or stimulus to which the reaction is being made. For example, a person may smile when greeted by a friend, or may become angry if insulted. Reactions can also be instinctive, such as a reflex action or a conditioned response. Reactions can be studied in terms of neuroscience and psychology, as an important part of understanding human behavior.

To learn more about reaction

https://brainly.com/question/25769000

#SPJ4

After running in a 10k road race, CJ should consume about 1-1.2 grams of carbohydrate per kilogram of body weight within 30 minutes to replenish glycogen stores and aid in muscle recovery. For example, if CJ weighs 70 kilograms, they should consume 70-84 grams of carbohydrate after the run. This can be achieved by consuming foods such as a sports drink, fruit, or a carbohydrate-rich meal.Carbohydrates are one of the three macronutrients essential for the human body to function properly. They are the primary source of energy for the body and are broken down into glucose, which is used by the body for fuel.

Carbohydrates can be classified as simple or complex. Simple carbohydrates, also known as sugars, are made up of one or two sugar molecules and are found in foods such as fruit, honey, and table sugar. Complex carbohydrates, also known as starches, are made up of long chains of sugar molecules and are found in foods such as bread, pasta, rice, and potatoes.

Carbohydrates are important for maintaining healthy blood sugar levels and providing energy for physical activity. However, it's important to choose complex carbohydrates over simple carbohydrates whenever possible as they provide more sustained energy and are typically more nutrient-dense.

The recommended daily intake of carbohydrates varies depending on factors such as age, gender, weight, and physical activity level. The American Dietary Guidelines suggest that carbohydrates should make up 45-65% of daily caloric intake for adults.

To know more about carbohydrates visit:

https://brainly.com/question/29775112

#SPJ11

The atoms of nickel are represented in 5 Ni₃(PO₄)₂ is 15.

In the term 5 Ni₃(PO₄)₂, the coefficient "5" in front of Ni₃(PO₄)₂ means that we have 5 moles of Ni₃(PO₄)₂

Each mole of Ni₃(PO₄)₂ contains 3 nickel atoms, so:

Number of nickel atoms = 5 moles x 3 atoms/mole

Number of nickel atoms = 15 atoms

Therefore, there are 15 atoms of nickel represented in the term 5 Ni₃(PO₄)₂.

A balanced equation is a chemical equation in which the number of atoms of each element in the reactants equals the number of atoms of that element in the products. This means that the law of conservation of mass is satisfied, which states that the total mass of the reactants must equal the total mass of the products in any chemical reaction.

For example, the balanced equation for the reaction between hydrogen gas and oxygen gas to form water is:

2H₂(g) + O₂(g) → 2H₂O(l)

To learn about nickel:

https://brainly.com/question/14457720

#SPJ4

Tub and tile scrub, pH = 11.6: basic , Blood, pH = 7.38: slightly basic/neutral

Vinegar, pH = 2.8: acidic

Chemically speaking, the pH scale measures the concentration of hydrogen ions in a solution. A solution with a pH of 7 is considered neutral, while a pH less than 7 is considered acidic, and a pH greater than 7 is considered basic (or alkaline). Based on this scale, the solutions can be identified as follows:

Maple syrup, pH = 4.7: slightly acidic/neutral

Acidic solutions have a pH of less than 7.0. They are characterized by the presence of hydrogen ions (H+) in solution. Examples of acidic solutions include vinegar, which has a pH of 2.8, and lemon juice, which has a pH of 2.3.

Basic solutions have a pH greater than 7.0. They are characterized by the presence of hydroxide ions (OH-) in solution. Examples of basic solutions include household ammonia, which has a pH of 11.0, and baking soda, which has a pH of 8.3.

To learn more about Acidic solutions

https://brainly.com/question/13208021

#SPJ4

The aldehyde that is the strongest electrophile and should produce the corresponding chalcone the fastest is piperonaldehyde.

The electrophilicity of an aldehyde is determined by the electron-withdrawing or electron-donating groups present on the aromatic ring. Piperonaldehyde has a methoxy group (-OCH₃) in the para position, which is an electron-donating group. This group increases the electron density on the ring and makes the carbonyl carbon more electrophilic.

In contrast, 3-nitrobenzaldehyde has a nitro group (-NO₂) in the meta position, which is an electron-withdrawing group. This group decreases the electron density on the ring and makes the carbonyl carbon less electrophilic. p-Anisaldehyde has a methoxy group in the ortho position, which is a weak electron-donating group that has little effect on electrophilicity.

To know more about the Electrophile, here

https://brainly.com/question/31611000

#SPJ4

Heating mantles are commonly used in laboratories for heating and maintaining the temperature of a reaction mixture.

They are designed to safely and efficiently heat flasks or vessels containing liquids or solids. However, there are certain things that should never be done with a heating mantle to avoid accidents and ensure safety in the laboratory:

1. Never use a damaged or faulty heating mantle: Damaged heating mantles can cause electrical shorts or fires, which can be dangerous. Always inspect the heating mantle for any visible signs of damage or wear and tear before use.

2. Never leave the heating mantle unattended: Leaving the heating mantle unattended can result in overheating, which can cause fires or explosion. Always monitor the heating mantle and the reaction mixture closely while it is heating.

3. Never exceed the maximum temperature rating: Each heating mantle has a maximum temperature rating, which should not be exceeded to prevent damage to the equipment and ensure safety. Always check the maximum temperature rating of the heating mantle and adjust the temperature accordingly.

4. Never use flammable or volatile solvents: Heating mantles should not be used with flammable or volatile solvents such as ether, benzene, or alcohol as these solvents can easily catch fire or explode under certain conditions. Use appropriate heating methods for these solvents.

5. Never touch the heating mantle while it is hot: The heating mantle can become very hot during use, and touching it can cause burns or injuries. Always allow the heating mantle to cool down completely before handling it.

Overall, it is important to follow proper safety procedures and manufacturer's instructions when using a heating mantle to prevent accidents and ensure safe laboratory practices.

To know more about Heating mantles, please click on:

https://brainly.com/question/29869923

#SPJ11

The net ionic equation for the reaction between barium nitrate and sulfate ions is: Ba2+ + SO42- → BaSO4 (s) In this reaction, the barium ions (Ba2+) from the barium nitrate solution react with the sulfate ions (SO42-) in the flask to form solid barium sulfate (BaSO4).

The nitrate ions (NO3-) from the barium nitrate solution do not participate in the reaction and remain in solution. Write the balanced molecular equation:Ba(NO₃)₂(aq) + SO₄²⁻(aq) → BaSO₄(s) + 2NO₃⁻(aq)  Write the total ionic equation by breaking all soluble ionic compounds into their respective ions Ba²⁺(aq) + 2NO₃⁻(aq) + SO₄²⁻(aq) → BaSO₄(s) + 2NO₃⁻(aq) Remove the spectator ions (ions that are present on both sides of the equation)  

In this case, the nitrate ions (2NO₃⁻) are the spectator ions. Write the net ionic equation by including only the ions that participate in the reaction: Ba²⁺(aq) + SO₄²⁻(aq) → BaSO₄(s) So, the net ionic equation that describes the reaction that occurs when a solution of barium nitrate is added to a flask containing sulfate ions is: Ba²⁺(aq) + SO₄²⁻(aq) → BaSO₄(s).

To know more about nitrate solution visit:

https://brainly.com/question/15095408

#SPJ11

The Ka for the monoprotic acid is 10^-4.60. This solution shows that the concentration of the acid, the pH of the solution, and the Ka of the acid are all interrelated and can be used to solve for each other.

To solve this problem, we first need to understand the relationship between the pH, the concentration of the acid, and the Ka of the acid. We can use the formula for Ka, which is Ka = [H+][A-]/[HA], where [H+] is the concentration of hydrogen ions, [A-] is the concentration of the conjugate base, and [HA] is the concentration of the acid.
We know that the pH of the solution is 2.83, which means that the concentration of hydrogen ions is 10^-2.83 M. We also know that the concentration of the acid is 1.74 M, which means that the concentration of the conjugate base is negligible in comparison. Therefore, we can assume that [HA] = 1.74 M and [H+] = 10^-2.83 M.
Plugging these values into the Ka formula, we get:
Ka = (10^-2.83 M)(x)/1.74 M
where x is the concentration of the conjugate base, which we can assume to be negligible. Solving for Ka, we get:
Ka = 10^-4.60
Therefore, the Ka for the monoprotic acid is 10^-4.60. This solution shows that the concentration of the acid, the pH of the solution, and the Ka of the acid are all interrelated and can be used to solve for each other.

To know more about monoprotic acid visit :

https://brainly.com/question/31732916

#SPJ11

Spilling the contents of the crucible after heating but before weighing can significantly affect the calculated % water in the sample.

This is because the water content in the spilled material will no longer be included in the final weight of the sample, resulting in an underestimation of the actual weight of the sample. This, in turn, will lead to an overestimation of the percentage of water in the sample.

In other words, if the crucible is spilled before the weighing, the weight of the sample will be lower than it should be. Therefore, the calculated percentage of water in the sample will be higher than it should be. This will result in inaccurate and unreliable results. It is important to repeat the experiment if any spillage occurs to obtain accurate results.

To know more about crucible,

https://brainly.com/question/13707704

#SPJ11

To calculate the theoretical mass percentage of oxygen in potassium chlorate (KClO3), we need to find the molar mass of KClO3 and the molar mass of oxygen.

The molar mass of KClO3 can be calculated by adding the atomic masses of its constituent elements:

K = 39.10 g/mol

Cl = 35.45 g/mol

O = 3 x 16.00 g/mol = 48.00 g/mol

Molar mass of KClO3 = 39.10 g/mol + 35.45 g/mol + 48.00 g/mol = 122.55 g/mol

The molar mass of oxygen is 16.00 g/mol.

The percentage of oxygen by mass in KClO3 can be calculated using the formula:

(molar mass of oxygen / molar mass of KClO3) x 100

= (16.00 g/mol / 122.55 g/mol) x 100

= 13.05%

Therefore, the theoretical mass percentage of oxygen in potassium chlorate (KClO3) is 13.05%.

To know more about theoretical mass percentage please visit

https://brainly.com/question/31840127

#SPJ11

The electron pair geometry around oxygen in a hydronium ion is tetrahedral. This is because there are four electron pairs around the oxygen atom, including three bonding pairs and one lone pair. The three hydrogen atoms are arranged in a trigonal planar arrangement around the oxygen atom, which creates a tetrahedral electron pair geometry for the oxygen atom.

To determine the electron pair geometry around oxygen in a hydronium ion (H3O+), we'll consider the following terms: electron pairs, lone pairs, and bonding pairs.

Step 1: Identify the number of electron pairs around the oxygen atom in the hydronium ion. Oxygen has 6 valence electrons, and in H3O+, it forms three single bonds with three hydrogen atoms, using 3 of its valence electrons. The remaining 3 valence electrons form a lone pair on the oxygen atom.

Step 2: Calculate the total number of electron pairs around oxygen. We have three bonding pairs (from the O-H bonds) and one lone pair. Therefore, there are 4 electron pairs around the oxygen atom in H3O+.

Step 3: Determine the electron pair geometry. With 4 electron pairs, the electron pair geometry around the oxygen atom in the hydronium ion is tetrahedral.

Learn more about hydronium ion here,

https://brainly.com/question/27586088

#SPJ11

The activity that most contributes to the depletion of the ozone layer is the release of ozone-depleting substances (ODSs), which include chlorofluorocarbons (CFCs), hydrochlorofluorocarbons (HCFCs), and halons.

These chemicals are used in a variety of industrial applications, including refrigeration and air conditioning, foam insulation, fire suppression systems, and aerosol sprays. When these chemicals are released into the atmosphere, they rise into the stratosphere, where they are broken down by ultraviolet radiation, releasing chlorine and bromine atoms that react with and destroy ozone molecules.

The depletion of the ozone layer can have serious consequences, including increased rates of skin cancer, cataracts, and damage to plants and animals. The Montreal Protocol, an international agreement signed in 1987, has been successful in reducing the production and use of ODSs and has led to the recovery of the ozone layer in some areas.

To know more about the ozone layer refer here :

https://brainly.com/question/14330630#

#SPJ11

Atomic operation a function or action implemented as a sequence of one or more instructions that appears to be indivisible; that is, no other process can see an intermediate state or interrupt the operation.

An uninterrupted series of code instructions is referred to as a "atomic operation." There are a variety of reasons why a programme might be cut short. A programme could be interrupted by a context switch in concurrent programming.1

Atomic refers to a variable's (of the static type) single point of access. Although slow, Atomic is thread-safe. The variable (dynamic type) is nonatomic if many threads access it. Although it is not thread-safe, nonatomic is quick.

Atomicity is the process of carrying out a series of activities in such a way that they appear to be carried out as a single, indivisible step. Atomic actions are also referred to as transactions in the literature on database administration and operating systems.

Learn more about Atomic operation:

https://brainly.com/question/31564365

#SPJ4

The complete question is:

______ is A function or action implemented as a sequence of one or more instructions that appears to be indivisible; that is, no other process can see an intermediate state or interrupt the operation.

The nitronium ion (NO2+) can be generated in situ by mixing nitric acid (HNO3) and a strong acid, such as sulfuric acid (H2SO4).

What is aromatic compounds?

Aromatic compounds are organic compounds that contain a special type of ring structure called an aromatic ring, or an arene. This ring is composed of alternating double bonds and single bonds between carbon atoms, which creates a highly stable and unique electron system.

The most common example of an aromatic compound is benzene, which has a six-carbon ring with alternating double bonds and single bonds. Other examples of aromatic compounds include toluene, naphthalene, and phenol.

The nitronium ion is an important electrophile used in many organic synthesis reactions, particularly in the nitration of aromatic compounds.

Learn more about aromatic compounds from the given link

https://brainly.com/question/30624539

#SPJ4

The interplanar spacing of the crystal lattice is 0.267 nm. It is worth noting that the structure of NaCl is a face-centered cubic crystal, and the interplanar spacing between the (111) planes (which are the most common planes in a face-centered cubic structure) is 0.282 nm.

To calculate the interplanar spacing, we need to use Bragg's law, which relates the angle of diffraction, the wavelength of the X-rays, and the interplanar spacing of the crystal lattice. The formula is given by:
nλ = 2d sinθ
Where n is the order of the diffraction, λ is the wavelength of the X-rays, d is the interplanar spacing, and θ is the angle of diffraction. In this case, we have n = 1, λ = 0.129 nm, and θ = 8.15°.
We can rearrange the formula to solve for d, giving us:
d = λ / (2 sinθ
Substituting the given values, we get:
d = 0.129 nm / (2 sin 8.15°) = 0.267 nm
Therefore, the interplanar spacing of the crystal lattice is 0.267 nm. It is worth noting that the structure of NaCl is a face-centered cubic crystal, and the interplanar spacing between the (111) planes (which are the most common planes in a face-centered cubic structure) is 0.282 nm. However, the question does not specify which set of planes are diffracting, so we cannot assume that it is the (111) planes.

To know more about crystal visit :

https://brainly.com/question/1951877

#SPJ11

The answer is radon. Radon is a colorless and odorless gas that is formed naturally from the decay of uranium and thorium in soil, rock, and water. Radon is considered significantly carcinogenic because it emits alpha particles, which can damage the DNA in our cells and lead to cancer.

When inhaled, radon and its decay products can cause lung cancer, especially in people who are exposed to high levels over a long period of time.

In terms of its radioactivity, radon has a half-life of 3.8 days, which means that half of a given amount of radon will decay in that time. However, its decay products, such as polonium-218 and lead-214, also emit alpha particles and have longer half-lives. These decay products can attach to dust and other airborne particles, which can be inhaled and increase the risk of lung cancer.

In summary, radon is the noble gas that is significantly carcinogenic due to its radioactive decay and that of its decay products. It is important to test for radon levels in homes and workplaces and to take steps to reduce exposure if levels are found to be high.

To know more about DNA visit:

brainly.com/question/264225

#SPJ11

The new pressure of the chlorine gas at 30.0°C can be calculated using the combined gas law, resulting in a pressure of 2.89atm.

The ideal gas law can be used to solve this problem, which relates the pressure, volume, temperature, and number of moles of gas in a system. At STP (standard temperature and pressure), the temperature is 273 K and the pressure is 1 atm. Thus, the number of moles of chlorine gas in the vessel can be calculated as follows:

n = PV/RT

where P is the pressure, V is the volume, R is the gas constant, and T is the temperature in Kelvin.

Using the given values at STP, the number of moles of chlorine gas is calculated as:

n = (1 atm) x (70.0 L) / (0.0821 L atm/mol K x 273 K) = 2.57 moles

To find the new pressure of the gas at a temperature of 30.0 °C, the ideal gas law can be rearranged as follows:

P2 = (nRT2) / V

where P2 is the new pressure, T2 is the new temperature, and the other variables are the same as before.

Substituting in the known values, we get:

P2 = (2.57 mol x 0.0821 L atm/mol K x 303 K) / 70.0 L = 2.89 atm

Therefore, the new pressure of the gas is 2.89 atm.

Learn more about chlorine gas here:

https://brainly.com/question/13123721

#SPJ11

Answer:the resistance of a material is determined by its length, cross-sectional area, and resistivity

Explanation:Resistance is a measure of how difficult it is for electric current to flow through a material. There are several quantities that determine the resistance of a piece of material, including its length, cross-sectional area, and the material's resistivity.

Let's start with length. The longer a material is, the more resistance it will have. This is because a longer path means that there is more material for the current to travel through, which increases the likelihood of collisions between electrons and atoms. For example, a long copper wire will have more resistance than a shorter copper wire of the same cross-sectional area.

The cross-sectional area of a material also plays a role in determining resistance. The larger the cross-sectional area of a material, the lower its resistance will be. This is because a larger cross-sectional area means that there is more space for electrons to flow through, reducing the likelihood of collisions. For example, a thick copper wire will have less resistance than a thin copper wire of the same length.

Finally, the material's resistivity is a key factor in determining its resistance. Resistivity is a measure of how strongly a material opposes the flow of electric current. Materials with high resistivity, like rubber or glass, will have a high resistance, while materials with low resistivity, like copper or silver, will have a low resistance.

To calculate the resistance of a material, we can use Ohm's Law, which states that resistance is equal to voltage divided by current. The unit of resistance is the ohm (Ω).

In summary, the resistance of a material is determined by its length, cross-sectional area, and resistivity. By understanding these factors, we can choose materials and design circuits that minimize resistance and improve electrical efficiency.

Two double bonds involve two pairs of electrons that are shared between two atoms. The electron pairs are arranged in a linear formation, resulting in a bond angle of 180 degrees.

Atoms are the smallest unit of matter that are made up of three particles: protons, neutrons and electrons. Protons have a positive charge and are found in the nucleus of an atom, while neutrons have no charge and also reside in the nucleus. Electrons have a negative charge and orbit around the nucleus. Atoms can bond together to form molecules and can be found in all living and non-living things. It is estimated that there are over 100 different types of atoms that make up everything in the universe. Atoms are essential for understanding the properties of matter, chemical reactions, and the behavior of elements.

On the other hand, a single unshared pair bond angle involves a single pair of electrons that is solely shared between two atoms. This results in a more bent bond angle of approximately 109 degrees.

To learn more about atoms

https://brainly.com/question/6258301

#SPJ4

The wide variety of moles of a compound that dissolve to offer one litre of saturated answer is referred to as its molar solubility. Unit of molar solubility: mol L-1.

The solubility (through which we commonly suggest the molar solubility ) of a stable is expressed because the awareness of the "dissolved stable" in a saturated answer. In the case of a easy 1:1 stable which includes AgCl, this will simply be the awareness of Ag+ or Cl– withinside the saturated answer. Determine the mass of the solute that dissolves in a given mass of solvent. Divide the mass of the solute through the mass of the solvent. Finally, multiply the price through a hundred on the way to document the solubility in g/100g.

To learn more about solubility check the link below-

https://brainly.com/question/23946616

#SPJ4

In a redox reaction, there are two important things that must be balanced: the number of electrons and the overall charge. Redox reactions involve the transfer of electrons from one reactant to another, and the number of electrons transferred must be equal on both sides of the equation. This ensures that the reaction is balanced and that conservation of mass is maintained. Additionally, the overall charge of the reactants and products must be balanced. This is done by adding electrons or ions to the equation as needed to ensure that the net charge is equal on both sides. Balancing both the number of electrons and the overall charge in a redox reaction is crucial for understanding and predicting chemical reactions.
Hi! In a redox reaction, two things that must be balanced are the number of atoms and the charges. To achieve a balanced redox reaction, you need to follow these steps:

1. Assign oxidation states to all elements involved in the reaction.
2. Identify the elements that undergo oxidation (increase in oxidation state) and reduction (decrease in oxidation state).
3. Write separate half-reactions for oxidation and reduction.
4. Balance the number of atoms for each half-reaction.
5. Balance the charges by adding electrons to the appropriate side of each half-reaction.
6. Adjust the coefficients to make sure the number of electrons gained in the reduction half-reaction equals the number of electrons lost in the oxidation half-reaction.
7. Combine the two half-reactions to form the balanced redox reaction.

By following these steps, you'll ensure both atoms and charges are balanced in your redox reaction.

To know more about redox reaction visit:

brainly.com/question/13293425

#SPJ11

The electron configuration for germanium at ground state can be written as: 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p²

The electron configuration for an atom of germanium at ground state can be represented using the noble gas notation. Germanium has an atomic number of 32, which means it has 32 electrons. The noble gas that comes before germanium in the periodic table is argon, which has an electron configuration of 1s²2s²2p⁶3s²3p⁶.

To write the electron configuration of germanium, we can start by filling up the orbitals in increasing order of energy. The first two electrons will fill up the 1s orbital, the next two electrons will fill up the 2s orbital, and the next six electrons will fill up the 2p orbital. This brings us up to the 10th electron, which will start filling up the 3s orbital.

The remaining 22 electrons will fill up the 3p and 4s orbitals. However, since the 3d orbital has lower energy than the 4s orbital, one electron from the 4s orbital will move to the 3d orbital to achieve a more stable configuration. This means that the electron configuration for germanium at ground state can be written as:

1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p²

To know more about electron configuration, refer

https://brainly.com/question/26084288

#SPJ11

The pH of the solution after the addition of 150.0 mL of HNO₃ is calculated as 1.70 .

Option E is correct.

The idea of molarity and pH are utilized in the issue. Initially, expression of molarity is used to calculate the moles of nitric acid and ammonia. The pH expression is then used to determine the solution's pH.

The molarity of the solution is : Molarity = moles of solutes/ vol. of solution .The S.I. unit of molarity is molar.

The pH is a negative logarithm of hydrogen particle present in the arrangement. It is stated as:

                           pH = - log [H⁺]

The molar concentration of hydronium ion is [ H⁺].

The volume of solution  given = 150 mL

Molarity = 0.10 mol /L

moles of nitric acid solution = ?

moles of HNO₃ = 150 mL × 0.10 mol/L × 1 L/ 1000 mL

                                   0.015 mol

The volume of solution given = 100 mL

molarity = 0.10 mol/L

moles of ammonia = ?

Moles of HNO₃ = 100 mL × 0.10 mol/L × 1 L/ 1000 mL

                                     0.01 mol

The reaction between ammonia and nitric acid is expressed as :

                  HNO₃ + NH₃ ⇒ NH₄⁺ + NO₃⁻

Since the assembly of nitric destructive is more than antacid ,so nitric destructive will change over all smelling salts into ammonium molecule.

Excess of HNO₃ = 0.015 mol - 0.01 mol

                           = 0.005 mol

Total volume = 100 mL + 150 mL

                     =  250 mL

As nitric corrosive is solid corrosive so it separates totally to deliver hydrogen particle stay in the arrangement.

Volume of solution = 250 mL

Moles of hydrogen = 0.005mol

Molarity of H⁺ = (0.005 mol/ 250 mL) ₓ (1000 mL / 1L)

                       =  0.02 mol / L

                         = 0.02 M

pH of the solution = - log [ H⁺]

                               = - log [ 0.02 M]

                                =  1.69

                                = 1.70

After adding a given volume of nitric acid, the pH of the solution is expressed using the value of the hydrogen ion molarity that was calculated in the first step.

Incomplete question:

A 100.0 mL sample of 0.10 M NH₃ is titrated with 0.10 M HNO₃. Determine the pH of the solution after the addition of 150.0 mL of HNO₃. The Kb of NH₃ is 1.8 × 10 -5.

A. 2.30

B. 6.44

C. 12.30

D. 7.56

E. 1.70

Learn more about molarity:

brainly.com/question/17138838

#SPJ4

The daughter of Olivia Celie; Samuel and Corrine raise her in Africa. Son of Adam Celie; The missionaries also raise him in Africa. He weds Tashi.

Nettie learns from Samuel's account that the two children are, in fact, Celie's biological children who are still alive. Samuel and Corrine adopt Olivia Celie, the biological daughter of Alphonso and Olivia Celie. Tashi, a village girl from Olinka, forms a close bond with Olivia. The strength of women's relationships is demonstrated by this friendship that transcends cultural boundaries.

Shug checks the mail and discovers a letter from Celie's sister Nettie, who is currently living in Africa, as Albert and Grady are intoxicatedly discussing their romantic rivalry. Celie's sighting in town, Corrine, and her husband, Reverend Samuel, adopted Celie's two children, Olivia and Adam, according to the letter.

Learn more about Biological:

brainly.com/question/30856489

#SPJ4

The correct answer is option c. 2-Hexyne which is explained in the below section.

Alkynes are immiscible in water. They do now no longer react with water beneathneath regular conditions. Alkynes can also additionally react with water withinside the presence of dilute sulphuric acid and mercuric sulphate at a temperature of 333K. This effects withinside the formation of carbonyl compounds. This effects withinside the formation of carbonyl compounds. The addition of water to a triple bond, like the corresponding addition to a double bond, is called hydration. The hydration of alkynes gives ketones

Thus, the correct option is c.

To learn more about Alkynes check the link below-

https://brainly.com/question/22933069

#SPJ4

Answer: (A)Distance of gaseous planets from the sun is more than that of solid planets.

Explanation: The gas and ice giant planets take longer to orbit the Sun because of their great distances. The farther away they are, the more time it takes to make one trip around the Sun. The densities of the gas giants are much less than the densities of the rocky, terrestrial worlds of the solar system. Gas giants are not all gas.

Answer:

(A) Distance of gaseous planets from the sun is more than that of solid planets.

Explanation:

The correct answer is (A) the distance of gaseous planets from the sun is more than that of solid planets.

The time taken by a planet to revolve around the sun is determined by its distance from the sun and the gravitational force acting between them. According to Kepler's laws of planetary motion, planets that are farther from the sun take longer to complete their orbits than those that are closer.

Gaseous planets such as Jupiter, Saturn, Uranus, and Neptune are much farther from the sun than the solid planets, including Mercury, Venus, Earth, and Mars. Thus, gaseous planets take longer to revolve around the sun than the solid planets.

The mass of a planet, the number of moons it has, and its temperature do not directly influence the time taken to complete an orbit around the sun. Therefore, options (B), (C), and (D) are incorrect.

The electron affinity for P is less favorable compared to the electron affinity for S because of there is a greater attraction between an added electron and the nucleus in P than in S, option A.

At the point when one electron is added to an impartial molecule to make an adversely charged particle, a specific measure of energy is delivered. In chemistry, this is referred to as electron affinity. Because it is difficult to measure the affinities of electrons in an atom, only a small number of chemical elements, primarily the halogens, have values.

These numbers came from measurements of the lattice energies and formation energies of the elemental ionic compounds. An element's ability to operate as an electron acceptor (an oxidising agent) is measured by their electron affinity, which is typically correlated with the type of chemical bonds they make with other elements.

Learn more about Electron affinity:

https://brainly.com/question/20118516

#SPJ4

Complete question:

which of the following best helps to explain why the electron affinity for P is less favorable compared to the electron affinity for S?

there is a greater attraction between an added electron and the nucleus in P than in S.

there is a lesser attraction between an added electron and the nucleus in P than in S.

there is a no attraction between an added electron and the nucleus in P than in S.

there is a same attraction between an added electron and the nucleus in P than in S.

The fusion response releases extra strength than fission. Fusion does not produce dangerous long-time period radioactive waste as a spinoff like fission does.

Fusion desires extra strength to perform than fission does. The strength required for fusion has been a barrier to its extensive use for strength generation. While fission is utilized in nuclear electricity reactors on account that it is able to be controlled, fusion isn't always but applied to provide electricity. Some scientists trust there are possibilities to do so. Fusion gives an attractive opportunity, on account that fusion creates much less radioactive cloth than fission and has a almost limitless gasoline supply. One of the maximum low-carbon strength sources. It additionally has one of the smallest carbon footprints. It's one of the solutions to the strength gap. It's critical to our reaction to weather extrade and greenhouse fueloline emissions.

To learn more about fission check the link below-

https://brainly.com/question/3992688

#SPJ4