The Sun can not penetrate too far into the Earth.
The air surrounding us consists of different gases and also some particles. This layer of air, known as the Earth’s atmosphere is retained by gravity. The two main components are nitrogen (78%) and oxygen (21%). Besides containing the oxygen human beings and other organisms need to live, the atmosphere has a number of other “features” such as absorption of ultraviolet radiation from the Sun by the ozone layer and heat retention known as the greenhouse effect. Over the span of 11 years, the Sun’s activity waxes and wanes as magnetic field lines that are wound and tangled inside the Sun periodically break through to the surface. These breakthroughs produce sunspots that travel together across the face of the Sun. The Sun contains 99.8 percent of the mass in our solar system. Its gravitational pull is what keeps everything here, from tiny Mercury to the gas giants to the Oort Cloud, 186 billion miles away. But even though the Sun has such a powerful pull, it's surprisingly hard to actually go to the Sun: It takes 55 times more energy to go to the Sun than it does to go to Mars.Our planet is traveling very fast — about 67,000 miles per hour — almost entirely sideways relative to the Sun. The only way to get to the Sun is to cancel that sideways motion.To know more about sun visit:
https://brainly.com/question/14663972
#SPJ4
Which of the following light sources is the most efficient?
A. incandescent B. LED C. fluorescent D. sodium vapor
LED (light-emitting diοde) lights are the mοst efficient of the options given.
What is light emitting diode?LED (light-emitting diοde) lights are the mοst efficient type of light source. They use less energy, last longer, produce less heat and are more durable than οther types of lights like incandescent, fluorescent, and sodium vapor lights.
They are also more energy-efficient and ecο-friendly.
They use less energy than incandescent and fluοrescent lights.
They have a lοnger lifespan than incandescent and fluorescent lights.
They produce less heat than incandescent and fluοrescent lights.
They are more durable and mοre resistant to breakage than incandescent and fluοrescent lights.
To learn more abοut LED refer:
brainly.com/question/30047287
#SPJ4
When you stand on a bathroom scale, the scale does not measure the force of gravity (i.e., weight) acting upon your mass. What does the scale measure?
The scale reading is actually a measure of the upward force applied by the scale to balance the downward force of gravity acting upon an object
What is a bathroom scale ?Scales measure weight, which is the force acting on a mass equal to the mass times the acceleration of gravity of the object. Due to the dependence of the weighing mechanism and the weight of any given object on the local gravity, a scale cannot accurately determine mass.
Although we use a scale to determine how much we weigh, the scale reading actually represents the upward force the scale applies to an object to counteract the downward force of gravity. These two forces are balanced when an object is in an equilibrium condition (whether it is at rest or moving at a constant speed).
Learn more about Bathroom scale here:
https://brainly.com/question/12993931
#SPJ4
micah is cooking a pork roast for his family. he wants to be sure the pork roast has an internal temperature of at least 145 degrees fahrenheit. he uses a thermometer to measure the internal temperature at three randomly chosen places. the minimum reading in the sample is 152 degrees fahrenheit. identify the population, the parameter, the sample, and the statistic. population, minimum temperature of 145 degrees fahrenheit; parameter, all pork temperature readings; sample, three random
The population in this particular problem is the pork roast. The parameter on which the population is being evaluated is 142 degrees Fahrenheit. The sample is the three random places in the pork roast where the temperature was checked. The statistic is 152 degrees Fahrenheit, which was the minimum temperature recorded during sampling.
1. The population is the object or group on which the evaluation is being done. In this scenario, the population is the pork roast.
2. Parameter is a bar which is set for measuring a feature in the population. In this problem, Micah wants the pork roast, i.e., the population, to have a minimum temperature of 142 degrees Fahrenheit.
3. A sample is chosen at random from a given population to check if the parameter matches. In this problem, Micah checked the temperature of the pork roast at three random places to deduce the average temperature of the population.
4. The statistic is the actual measurement of the sample which is compared to the parameter. In this case, the statistic would be the average minimum temperature of 152 degrees Fahrenheit.
Learn more about random sampling here brainly.com/question/13219833
#SPJ4
Helpppppppppoopppppppppppppp
Answer:help
Explanation:i help
A 2 m long pendulum has a 100 g bob ties at one end and can oscillate freely.Don't forget to draw the diagrams FBDsa. Calculate the tension in the string in this equilibrium position when is is simply hanging. (Net force =0)The bob is moved to a side till the string makes an angle of 18 degrees with the vertical.b. Calculate the height to which the bob is raised (h=L(1-cos theta))c. Calculate the potential energy gained in the process PE=mghThe bob is now released to oscillate freely.d. Calculate the velocity with which the bob moves past the equilibrium position (v=sqrt(2gL))e. Calculate the tension in the string as bob moves past the equilibrium position (T-mg=mv2/r)
a. The tension in the string in the equilibrium position is 980 N.
In the equilibrium position, the bob is simply hanging and is not moving, so the net force on the bob is 0. The force acting on the bob is the tension in the string, which is equal to the weight of the bob (mg) in the opposite direction.
Therefore, the tension in the string in the equilibrium position is equal to the weight of the bob, which is [tex](100g)(9.8 m/s^2) = 980 N[/tex].
b. The height to which the bob is raised is 0.063 m.
It can be calculated using the equation h=L(1-cos theta).
Therefore, the angle theta is 18 degrees, so the height is (2m)(1-cos 18) = 0.063 m.
c. The potential energy gained in the process is 6.1 J
It can be calculated using the equation PE = mgh. The mass of the bob is 100g = 0.1 kg, the height is 0.063 m and the acceleration due to gravity is 9.8 m/s^2.
Therefore, the potential energy is [tex](0.1 kg)(9.8 m/s^2)(0.063 m)[/tex] = 6.1 J.
d. The velocity with which the bob moves past the equilibrium position is 4.5 m/s.
It can be calculated using the equation [tex]v = \sqrt{ (2gL)[/tex] The acceleration due to gravity is [tex]9.8 m/s^2[/tex] and the length of the pendulum is 2 m, so the velocity is [tex]\sqrt (2(9.8 m/s^2)(2m))[/tex] = 4.5 m/s.
e. The tension in the string as the bob moves past the equilibrium position is 24.7 N.
It can be calculated using the equation [tex]T - mg = mv^2/r[/tex]. The mass of the bob is 100g = 0.1 kg, the velocity is 4.5 m/s, and the radius is 2m, so the tension is [tex](0.1 kg)(4.5 m/s)^2/(2m) + (0.1 kg)(9.8 m/s^2)[/tex] = 24.7 N.
To learn more about tension in a string:
https://brainly.com/question/24994188
#SPJ4
LINEAR DYNAMICS, WORK ENERGY & POWER, SYSTEM OF
(PARTICLES, CONSERVATION OF MOMENTUM
Okoro and Okafor weigh 70kg and 50kg respectively and push against each
other. If Okoro pushes Okafor by a force of 700N, Okafor has pushed Okoro
with.lumo)
loops to insnog
A. 500N
enA
B. 0
C. 700N
(noitutile
D. 250N
The principle of conservation of momentum states that if two objects collide, then the total momentum before and after the collision will be the same if there is no external force acting on the colliding objects.
What is the conservation of linear momentum?The conservation of linear momentum is a general law of physics which states that the overall momentum of a system is constant and that the quantity called momentum which characterises motion never changes in an isolated collection of objects.
For a system to have its momentum conserved, it must satisfy two conditions: During the interaction, the system's mass must not change. The objects may transmit mass to one another as they interact (apply forces to one another), but any mass one object gets is offset by the loss of that mass from another.
On the reasonable assumption that space is uniform—that is, that there is nothing in the rules of physics that prevents the conservation of linear momentum—the law of conservation of linear momentum is amply supported by experiment and can even be analytically inferred.
To learn more about linear momentum refer to :
https://brainly.com/question/24424291
#SPJ1
A low-strength aspirin tablet (sometimes called baby aspirin) contains 81 mg
of the active ingredient. How many kilograms of the active ingredient does a 100‑tablet bottle of baby aspirin contain?
Answer:
0.0081 kg
Explanation:
A low-strength aspirin tablet contains 81 mg of the active ingredient. To find the total amount of active ingredient in a 100-tablet bottle, we can multiply the amount per tablet by the number of tablets:
81 mg/tablet * 100 tablets = 8,100 mg
To convert milligrams (mg) to kilograms (kg), we divide by 1,000,000.
8,100 mg / 1,000,000 = 0.0081 kg
So a 100-tablet bottle of baby aspirin contains 0.0081 kg of the active ingredient.
Answer:
0.0081 kg
Explanation:
number of 81 mg pills
1 kg = 106 mg
1.05005 x 105 kg = 1.05005 x 1011 mg
n = 1.5005 x 1011 / 8.1 x 10
n = 0.129635802 x 1010
n = 1.29635802 x 109
hope it helps :)
Mark me as brainliest!
you have been asked to design an experiment to show whether spaghetti cooks faster with or without salt in the cooking water. which of the following is the variable being tested?
The quantity of water used, the type of spaghetti used, and the intervals at which the spaghetti is checked to see if it is finished.
Water becomes harder due to the presence of calcium, magnesium, and iron(II) ions, which prevents soap solution from creating a lather. Students examine the impact of several dissolved salts, which comprise a variety of cations and anions, on the production of lather in this experiment. After that, they try to determine which ions are impeding lathering.
The students can work in pairs or bigger groups to complete this as a class project.
The first step for the students is to label eight test tubes. Alternatively, they can individually conduct an investigation using three or four more test tubes and distilled water, as long as they include at least one sodium or potassium salt and one calcium or magnesium salt.
Learn more about Water here:
https://brainly.com/question/19920929
#SPJ4
the expression indicates that under these specific conditions the work done on the particle depends on the magnitude of the force, the displacement of the particle, and the angle between the direction of the force and the direction of the displacement.
The magnitude of the force is directly related to the amount of work done; the greater the force, the greater the amount of work done on the particle.
The scalar or dot productMathematically, this is expressed as:Work = Force × Displacement × cos (θ),where θ is the angle between the force and the displacement.When a force is applied to a particle, the work done on the particle is determined by a combination of the magnitude of the force, the displacement of the particle, and the angle between the direction of the force and the direction of the displacement. The displacement is also directly related to the amount of work done; the greater the displacement, the greater the amount of work done on the particle. The angle between the direction of the force and the direction of the displacement is also related to the amount of work done; when the angle between the two is perpendicular, the amount of work done is maximised, while when the angle is parallel, the amount of work done is minimised. In conclusion, the amount of work done on a particle is determined by the magnitude of the force, the displacement of the particle, and the angle between the direction of the force and the direction of the displacement. The combination of these three factors must be taken into account when calculating the amount of work done on a particle.To learn more about the scalar or dot product refer to:
https://brainly.com/question/26550859
#SPJ4
We will start by choosing a good research DESIGN. From the following options, which one would be best for testing whether our memory is accurate?
Case Study design
Correlational design
Experimental design
The best design for testing whether memory is accurate would be option C: Experimental design.
What is Experimental design?An experimental design allows the researcher to manipulate one or more independent variables and observe the effect on a dependent variable, in this case, memory accuracy.
This type of design allows for a cause-and-effect relationship to be established, as the manipulation of the independent variable is the only reason for the change in the dependent variable. This design also allows the researcher to control for extraneous variables that could affect the results.
In conclusion, an experimental design is the best option for testing whether memory is accurate as it allows for a cause-and-effect relationship to be established, allows the researcher to control for extraneous variables and allows for generalizing the findings to a larger population.
Learn more about Experimental design from
https://brainly.com/question/1418338
#SPJ1
A car travels at constant speed up a hill from point A to point B, as shown in the diagram below. As the car travels from A to B, its gravitational potential energy
answer choices
remains the same and its KE remains the same
increases and its KE decreases
remains the same and its KE decreases increases and its KE remains the same
A car travels at constant speed up a hill from point A to point B. As the car travels from A to B, its gravitational potential energy (b) increases and its KE decreases.
Gravitational potential energy:
If a mass (m) moves from infinity to a point within the gravitational influence of the source mass (M) without acceleration, then in transferring it to the source field. The amount of work done is stored in the form of potential energy. This is known as gravitational potential energy. It is denoted by the symbol Ug.
We know that the potential energy of an object at a position is defined as the energy stored in the object at that position. When the position of the body changes due to the influence of an external force, the change in potential energy equals the work done by the force on the body.
Under the action of gravity, the force is conservative because the work done is independent of the path of position change. Also, all these forces have potential. Since the effect of gravity on an object at infinity is zero, it has zero potential energy, which we call the reference point.
The equation for gravitational potential energy is:
GPE = m × g× h
where, m is the mass in kilograms
g is the acceleration due to gravity.
h is the height above the ground in meters.
Learn more about Gravitational Potential Energy:
https://brainly.com/question/19768887
#SPJ4
A force can change an object's___energy by changing its motion or its position. Question options: a. electromagnetic b. mechanical c. potential d. kinetic
Answer:
(d) Kinetic Energy
Explanation:
Applying a force requires us to do work. After work has been done on the body, energy used by us to do work is transferred to the object, and the object will be moving with a new constant speed. The energy transferred is known as kinetic energy, and it depends on the mass and speed achieved.
solve the question below
The velocity of the barium atom moving forward relative to the tube is 2.35 x 10^5 m/s and the velocity of the krypton atom relative to the containing tube is -2.35 x 10^5 m/s.
What is the velocity of the krypton atom (Kr) relative to the barium atom after separation?The velocity of the krypton atom (Kr) relative to the barium atom after separation is 2.35 x 10^5 ms^-1. This is the velocity at which the krypton atom is expected to move directly backwards after being separated from the auranium atom. It is important to note that this velocity is relative to the barium atom, and not the containing tube. To find the velocity of the krypton atom relative to the containing tube, we would need to take into account the initial velocity of the auranium atom and the mass ratios of the elements involved.
To know more about Barium Atom visit: https://brainly.com/question/14317471
#SPJ1
A sperm whale can accelerate at about 0.100 m/s2 when swimming on the surface of the ocean. How far will a sperm whale travel if it starts at a speed of 1.10 m/s and accelerates to a speed of 2.44 m/s? Assume the whale travels in a straight line.
The distance traveled by the sperm whale traveling at an initial speed of 1.10m/s to 2.44m/s is 23.7m.
How to calculate distance?The distance traveled by the sperm whale can be estimated using one of the equations of motion as follows:
v² = u² + 2as
Where;
v = final velocityu = initial velocitya = accelerations = distanceAccording to this question, a sperm whale can accelerate at about 0.100 m/s² when swimming on the surface of the ocean. The distance traveled by the whale can be calculated as follows:
2.44² = 1.10² + 2(0.10)(s)
5.95 = 1.21 + 0.2s
4.74 = 0.2s
s = 23.7m
Therefore, 23.7m is the distance of the sperm whale.
Learn more about distance at: https://brainly.com/question/29055485
#SPJ1
part d: use the constraints of the real-world situation to predict the height of the water balloon at 10 seconds. use complete sentences to support your answer
The height of the water balloon at 10 seconds will be 0 ft.
The information for a linear pair is given in the question like ordered pair
(0,60); (2,80); (3,80); (4,20); (6,0); (7,0); (8,0)
The values (input) on the time-related x-axis make up the domain.
The values entered on the y-axis, which represents the height the balloon attained, make up the range.
Now it is given that the height of the water balloon is continuously decreasing from 3 seconds after being thrown off the roof, reaching a height of 0ft. at 6 seconds, and maintaining that height up until 8 seconds, Newton's law of motion states that at 10 seconds, provided that no additional force is applied to the balloon, its height is 0ft.
The height of 0 feet is obtained at 10 seconds after the balloon is launched by extending the graph further.
Question)- The linear model represents the height, f(x), of a water balloon...
The linear model represents the height, f(x), of a water balloon thrown off the roof of a building over time, x, measured in seconds:
Part A: During what interval(s) of the domain is the water balloon's height increasing? (2 points)
Part B: During what interval(s) of the domain is the water balloon's height staying the same? (2 points)
Part C: During what interval(s) of the domain is the water balloon's height decreasing the fastest? Use complete sentences to support your answer. (3 points)
Part D: Use the constraints of the real-world situation to predict the height of the water balloon at 14 seconds. Use complete sentences to support your answer. (3 points)
Learn more about height
brainly.com/question/20594266
#SPJ4
For a given fluid at a given temperature, we plot the shear stress vs the shear strain rate. The slope of the resulting line can be referred to as the ____________ (one word).
Choose matching definition
O viscosity
O solubility
O density
O water
The slope of the resulting line can be referred to as the viscosity.
What is mean by viscosity? Viscosity is a measure of a fluid's resistance to flow. It is a property of a fluid that describes how easily it can be moved or stretched. It is a measure of how thick a liquid is and how easily it can be poured or mixed. Viscosity is measured in units such as centipoise (cP), poise (P), or centistokes (cSt). The higher the viscosity of a fluid, the slower it flows. Viscosity can be affected by temperature, pressure, and other factors. For example, temperature can increase the fluid's viscosity, while pressure can decrease it. Viscosity is an important factor in many engineering and industrial processes, such as oil drilling, automotive lubrication, and paint applications. It affects the performance of engines, pumps, and other machinery. It is also important in the design of vessels and pipelines, and it affects the flow of fluids through them. Knowing the viscosity of fluids is essential for successful operation of these systems.To learn more about viscosity refer to:
https://brainly.com/question/2568610
#SPJ4
You are on the roof of the physics building, 46.0 m above the ground. Your physics professor, who is 1.80 tall, is walking along side the building at a constant speed of 1.20 m/s. If you wish to drop an egg on your professor's head, how far from the building should the professor be when you release the egg? Assume that the egg is in free fall.Take the free fall acceleration to be 9.80 m/s^2
The physics professor should be 3.60m far from the physics building for the egg to successfully fall on professor's head, assuming freefall motion of the egg and acceleration to be 9.80 m/s^2.
The height of the building = 46 m
The height of the professor = 1.80 m
The effective height for freefall of the egg = 46.00 - 1.80 = 44.2 m
As S = ug + 1/2a[tex]t^{2}[/tex]
44.2 = 0 + 1/2 × [tex]t^{2}[/tex] × 9.8
[tex]t^{2}[/tex] = (2 × 44.2) / 9.8
[tex]t^{2}[/tex] = [tex]\sqrt{9.02}[/tex]
[tex]t[/tex] = 3.003 s
Let the distance travelled by the professor be x
The time taken by the egg to fall is equal to the time taken by the professor to reach the building through distance x
Speed with which the professor is walking = 1.20 m/s
Now as Distance = Speed × Time,
x = 1.20 × 3.003
x = 3.6036 meters.
Learn more about freefall here:
https://brainly.com/question/17067422
#SPJ4
A ball falls from height of 18.5 m, hits the floor, and rebounds vertically upward to height of 15.0 m. Assume that m = 0.360 kg. (a) What is the impulse (in kg. m/s) delivered to the ball by the floor? magnitude kg. m/s direction up (b) If the ball is in contact with the floor for 0.0400 seconds, what is the average force (in N) the floor exerts on the ball? magnitude direction up
(a) Impulse delivered to the ball by the floor is 3.8 kg.m/s, and direction is upward. (b) average force exerted on the ball by the floor is 95 N, and the direction is upward.
What is impulse?Amount of force applied for a certain amount of time to cause the change in momentum is called impulse.
(a) impulse delivered to ball by the floor is;
As, impulse = change in momentum = m(vf - vi)
where m is mass of the ball, vf is final velocity of the ball after the collision and vi is initial velocity of the ball before collision.
Since the ball falls from a height of 18.5 m and rebounds to a height of 15.0 m, we know that the final velocity of the ball is upward, and the initial velocity of the ball is downward.
final velocity ; vf = sqrt(2gh)
where g is acceleration due to gravity and h is height of the rebound.
initial velocity; vi = sqrt(2gh)
where g is acceleration due to gravity and h is height of the fall.
vf = sqrt(29.815) = 7.68 m/s
vi = sqrt(29.818.5) = -10.26 m/s (upwards)
So, impulse = m(vf - vi) = 0.360 kg * (7.68 m/s - (-10.26 m/s)) = 3.8 kg.m/s
The impulse delivered to the ball by the floor is 3.8 kg.m/s, and direction is upward.
(b) The average force exerted on the ball by the floor;
average force = impulse / time of contact = 3.8 kg.m/s / 0.0400 s = 95 N
direction of force is upward.
The average force exerted on the ball by the floor is 95 N, and the direction is upward.
To know more about impulse, refer
https://brainly.com/question/229647
#SPJ4
if the terminal side of an angle theta passes through the point (-6, -3) determine the numerical value of all six trig functions
The terminal side of an angle theta passes through the point (-6, -3) wherein x= -6 and y= -3
The six trigonometric functions of theta are as follows:
sin θ = y/r
cos θ = x/r
tan θ = y/x
cosec θ = r/y
sec θ = r/x
cot θ = x/y
wherein r= √(x^2+y^2)
Therefore, the equations become,
r= √((-6^2)+(-3^2)) = √36+9 = √45 = 6.708
hence, sin θ = (-3)/6.708 = -0.44
cos θ = (-6)/6.708 = -0.89
tan θ = (-3)/(-6) = 0.5
cosec θ = 6.708/(-3) = -2.236
sec θ= 6.708/(-6) = -1.118
cot θ = (-6)/(-3) = 2
Learn more about trigonometric functions here brainly.com/question/15706158
#SPJ4
click on bar graph, and observe the kinetic energy bar as the skater goes back and forth. you can select slow motion below the track for a more accurate observation. where on the track is the skater's kinetic energy the greatest?
Kinetic energy reaches its peak at the track's lowest point as the skater goes back and forth.
What is kinetic energy?In physics, an object's kinetic energy is the energy it has as a result of its motion. It is defined as the amount of work required to accelerate a body of a given mass from rest to a given velocity. The body retains its kinetic energy after gaining it during acceleration unless its speed changes. Kinetic energy is the energy of motion, which can be seen as an object or subatomic particle moving. Kinetic energy exists in every moving object and particle. Kinetic energy is demonstrated by a person walking, a soaring baseball, a crumb falling from a table, and a charged particle in an electric field.
Here,
Kinetic energy peaks at the lowest point of the track as the skater goes back and forth.
To know more about kinetic energy,
https://brainly.com/question/26472013
#SPJ4
the correct, general definitions of velocity and acceleration, in terms of position vector ~r, are ~v
Velocity is a vector quantity that describes an object's change in position over time. The general definition of velocity is the derivative of the position vector ~r with respect to time, denoted as v = dr/dt. This means that velocity is the rate of change of position with respect to time. It is also a measure of how fast an object is moving in a particular direction.
Acceleration is another vector quantity that describes an object's change in velocity over time. The general definition of acceleration is the derivative of the velocity vector ~v with respect to time,
denoted as a = dv/dt. This means that acceleration is the rate of change of velocity with respect to time. It is also a measure of how quickly an object's velocity is changing.
In summary, velocity is a measure of how fast an object is moving in a particular direction, while the acceleration is a measure of how quickly an object's velocity is changing. Both are vector quantities and can be described in terms of position vector ~r.
Read more about Kinematics:
https://brainly.com/question/26407594
#SPJ4
Problem 1. Which of the following expressions could be valid ways to calculate a distance in physics? Briefly explain why/why not for each. (Hint: Think about what kind of physical quantity each term is, and what units it carries.) (a) 2πd , where d is a position(b) x+Δr, where x is a distance and Δr is a position difference (c) x+y ^2, where x and y are both distances (d) x^2+y^2, where x and y are both distances (e) A+z, where A is an area and z is a distance (f) vΔt^2, where v is a velocity and Δts a time difference (g) aΔt^2, where a is an acceleration and Δt is a time difference
a, b,d, g are expressions could be valid ways to calculate a distance in physics.
In physics, what specifically is a physical quantity?A physical quantity is a feature or quality of an object that may be gauged or computed from other measures. The quantification of physical quantities is expressed and evaluated using standards called units. Four fundamental units can be put together to create any unit.
The physical quantity of expression:
2πd => where d is position
d has unit 'm'
=> hence, 2πd => unit 'm'
Therefore, we can us this expression to define distance.
Sqrt (x+y ^2) => x, y are distance=> unit 'm'
=> sqrt(m+m^2) => In total, this expression does not have unit 'm'. hence, we can't use this expression to define distance.
What are fundamental units of matter?The length, mass, time, electric current, temperature, amount of a substance, and luminous intensity are the seven fundamental physical units that constitute up the International System of Units (SI), which is used to express all physical quantities.
Learn more about physical quantity here:
brainly.com/question/19266346
#SPJ4
Which of the following expressions could be valid ways to calculate a distance in physics? Briefly explain why/why not for each. (Hint: Think about what kind of physical quantity each term is, and what units it carries.)
(a) 2πd , where d is a position
(b) x+Δr, where x is a distance and Δr is a position difference
(c) Sqrt (x+y ^2), where x and y are both distances
(d) Sqrt( x^2+y^2), where x and y are both distances
(e) Sqrt(A+z), where A is an area and z is a distance
(f) vΔt^2, where v is a velocity and Δts a time difference
(g) aΔt^2, where a is an acceleration and Δt is a time difference
what is the direction of the electric force on the charge at the bottom left-hand vertex of the triangle due to the other two charges? caution: there are two vectors in each quadrant. compare their relative orientations.
The direction of the electric force on the charge at the bottom left-hand vertex of the triangle due to the other two charges (k * q 2)/(a 2)
What is the direction of the electric force?The amount of the charge at the triangle's top vertex, which is responsible for the charge at the bottom left corner, will act along the +ve x-axis and the +ve y-axis.
According to Coulomb's law, the forces acting on the charge at the triangle's top vertex are cos 60 and the forces acting on the charge at the bottom-left corner are
Since they resist one another, the amount of the charge caused by the charge in the bottom-right corner will only affect the -ve x-axis (like charges repel). There is a magnitude.
The top charge makes a 60° angle with the charge that we're thinking about.
F x = (k * q 2)/(a 2) * cos 60 represents the overall force acting on the charge along the x-axis.
The two x-axis forces and the y-axis force share some elements in common.
To learn more about electric force refer to:
https://brainly.com/question/17330790
#SPJ4
Macmillan Learning
The motion y(x, t) of a vibrating system is described by
y(x, t) = Aoe sin(kx - 2nft)
where x denotes a distance in meters and
denotes a time in seconds.
Denoting units with fractions using the "/" operator and units with products using the "*" operator, e.g., "1/kg" and "kg*s,"
what are the SI units of the quantity B?
what are the SI units of the quantity k?
what are the SI units of the quantity f?
units of ß:
units of k:
units of f:
When an object's location varies over time, it is said to be in motion. Motion is defined by the six variables displacement, distance, velocity, acceleration, time, and speed.
What exactly did you mean by "motion"?
Motion in physics changes over time depending on the location or orientation of a body. The action of travelling along a straight or curved line is known as translation. The term "rotation" refers to motion that changes the orientation of a body. The act or process of moving, or even the passage of a body from one point to another, is referred to as movement.
The act of moving one's body or any of its parts. 3. an intentional movement of the hand, gaze, etc.
To learn more about motion refer to :
brainly.com/question/28205978
#SPJ1
In an experiment to determine the viscosity of some oil, a ball is dropped into the oil. The position of the ball is given by the formula y(t)=A+Bt+Ce-Dt, where y is given in m, and t is the time in s. At t=0, y(0)= 0.07 m, the y-component of the velocity is zero and the y-component of the acceleration is ay(0)= 0.025 m/s^2
. As t approaches infinity, the y-component of the velocity approaches v(y) = 0.55 m/s. What is the viscosity?
The viscosity of the solution i.e. the value of D in the equation is 0.045 [tex]kgm^{-1} s^{-1}[/tex] or 0.045 newton-second per square meter.
At time t = 0,
y(t) = A + Bt + C[tex]e^{-Dt}[/tex]
0.07 = A + C (as t = 0 and power of zero gives unity)
y component of v at t = 0 => [tex]\frac{dy}{dt}[/tex] = 0
=> 0 + B + (-D) C[tex]e^{-Dt}[/tex] = 0
=> B - CD = 0
=> B = CD (as t = 0 and power of zero gives unity)
y component of acceleration a at t = 0 => [tex]\frac{dv}{dt}[/tex] = 0.025
=> 0 - (-D)CD[tex]e^{-Dt}[/tex] = 0.025
=> C[tex]D^{2}[/tex] = 0.025 (as t = 0 and power of zero gives unity)
At time = ∞
y component of velocity v => 0 + B + (-D) C[tex]e^{-Dt}[/tex] = 0.55
=> B = 0.55 (as t = ∞ and power of ∞ gives 0)
Now, using B = 0.55, CD = 0.55
As C[tex]D^{2}[/tex] = 0.025 => 0.55 × [tex]D[/tex] = 0.025
=> [tex]D[/tex] = 25 / 550 = 0.045
Hence, the viscosity of the solution is 0.045 [tex]kgm^{-1} s^{-1}[/tex] or 0.045 newton-second per square meter.
Learn more about viscosity here:
https://brainly.com/question/2193315
#SPJ4
Ahemingway2948
01/11/2020
Physics
College
answered • expert verified
You throw a softball (of mass 300 g) straight up into the air. It reaches a maximum altitude of 10.1 m and then returns to you. What is the gravitational potential energy of the softball at its highest position? Assume the ball departed from and returned to ground level.
Assume no energy is lost by the softball while it is in the air. What is the kinetic energy of the softball as soon as it leaves your hand? Answer in units of J.
What is the kinetic energy of the softball when it returns to your hand? Answer in units of J.
What is the speed of the ball? Answer in units of m per s.
29.69 J is the gravitational potential energy of the softball at its highest position.
29.69 J is the kinetic energy of the softball when it returns to your hand.
14.069 m/s is the speed of the ball.
What is kinetic energy?The energy of motion, or kinetic energy, may be seen in the movement of an item or subatomic particle. Kinetic energy can be discovered in every moving object and particle. Kinetic energy is generated when anything moving, such as a person walking, a baseball rising through the air, a piece of food dropping from a table, or a charged particle in an electric field. The object's squared velocity determines the kinetic energy. As a result, an object's kinetic energy quadruples when its velocity doubles.
Kinetic energy is divided into five kinds radiative, thermal, sound, electrically, and mechanic.
given that,
mass of the ball = 300 g = 0.3 Kg
maximum altitude of the ball = 10.1 m
Potential energy of the softball:
P.E = mgh
P.E = 0.3 x 9.8 x 10.1
P.E = 29.69 J
Maximum kinetic energy at which the ball is released from hand to reach height of 10.1 m is 29.69 J.
Kinetic energy at which ball returns to your hand is equal to 29.69 J.
speed of the ball:
K.E = 1/2 mv²
or, 29.69 = 1/2 × 0.3 × v²
or, v² = 197.93
or, v = 14.069 m/s
To know more about gravitational potential energy refer to:
https://brainly.com/question/15896499
#SPJ4
V2
V3- 31.00 V, 13= ?, R3= 20.00 Ohms
Solve for all the necessary parts of the circuit to answer the followin
question:
What is the current (13) which is flowing through resistor three?.
HELP PLEASE GIVING BRIANLEST
620V current I3, Electric circuits can be simple or sophisticated, but they all consist of the same three fundamental parts:
The Ohm's Law: How to Solve It?V = I*R is the equation for Ohm's Law. Voltage, or V, is an abbreviation for that term. In terms of amps, I stands for current. Ohms are the units used to measure resistance, or R.Electric circuits can be simple or sophisticated, but they all consist of the same three fundamental parts: wires that transport the current through the circuit; a device, like a lamp or motor, that uses the electricity to perform some type of work; and a power source, like a battery or generator.V = I*R is the equation for Ohm's Law. Voltage, or V, is an abbreviation for that term. In terms of amps, I stands for current. Ohms are the units used to measure resistance, or R.V = I * R = 31.00 * 20.00 = 620V.
To learn more about Ohm's Law refer to:
https://brainly.com/question/14296509
#SPJ1
400 jj of work are done on a system in a process that decreases the system's thermal energy by 300 jj .
In this process, 400 joules of work are done on the system, which means energy is being transferred into the system in the form of work. At the same time, the thermal energy of the system is decreasing by 300 joules. This suggests that the system is also losing energy in the form of heat and it indicates that the work done on the system is used to remove thermal energy from the system, leading to a decrease in the system's temperature. This process is likely an example of a cooling process, such as refrigeration or air conditioning.
Overall, the net change in the system's energy is -300 joules (decrease in thermal energy) + 400 joules (work done on the system) = 100 joules. This means that the system has gained 100 joules of energy overall, but it has gained it in the form of work and lost it in the form of heat.
To learn more about Thermal energy:
https://brainly.com/question/7541718
#SPJ4
The diagram shows the electric field due to point charge Q. Which statements are correct? Check all that apply.The electric field is nonuniform.The electric field is uniform.Charge Q is negative.Charge Q is positive.If charge A moves toward charge Q, it must be a negative charge.If charge A moves toward charge Q, it must be a positive charge
The following are correct statements about the diagram that shows the electric field due to point charge Q:
The electric field is non-uniform.Charge Q is positive.What is electric field?The attraction and repulsion of electrical charges, which is what causes electric flow, create an electric field, which is an invisible force field and is measured in Volts per metre (V/m).
This question requires us to discuss what the electric field due to point charge Q is.
As a result, we can see that the electric field, which serves as the physical field that surrounds electrically-charged particles, has a nonuniform electric field and a positive charge Q.
As a result, in terms of the electric field caused by point charge Q;
The electric field is nonuniform.Charge Q is positive.Learn more about electric field
brainly.com/question/14529872
#SPJ4
Complete question:
The diagram shows the electric field due to point charge Q. Which statements are correct? Check all that apply.
The electric field is nonuniform.The electric field is uniform.Charge Q is negative.Charge Q is positive.If charge A moves toward charge Q, it must be a negative charge.If charge A moves toward charge Q, it must be a positive charge.The most predominant direction from which the wind blows is from the Northeasteast (NEE,which is part of the northeast but nearer to the east side). The percentage of time that the windblows from this direction is about 36.5-37% of the time.
The NEE directional component is quite consistent throughout the year, with the exception of the summer months.
What is NEE direction?The wind direction from NEE is more frequent in the winter and spring, when cold air masses dominate the region.
The other predominant direction from which the wind blows is the Southwest (SW). The percentage of time that the wind blows from the SW is approximately 31%. The SW directional component is quite consistent throughout the year, and tends to be more frequent in the summer and fall months. This direction of wind is usually associated with warm air masses, which can bring rainfall and storms.
The remaining wind directions, from the North (N), South (S), East (E), and West (W), make up the remaining 32-33% of the time. These directions are usually associated with different weather patterns and are more variable throughout the year. For example, during the summer months, the N and S directional components will be higher than the E and W directional components.
The variability in wind direction throughout the year is caused by a combination of large-scale weather patterns and local terrain. The large-scale weather patterns that affect wind direction are the prevailing winds and global circulation patterns. Local terrain also plays a role, as some areas may have more of a particular direction of wind due to their location.
Overall, the NEE and SW directions are the most predominant wind directions in the region. Although the other four directions make up the remaining portion of the wind patterns, they are usually associated with different weather patterns and are more variable throughout the year.
To know more about weather patterns click-
https://brainly.com/question/28789144
#SPJ4
