Please help will give brainliest
What term describes the electrolyte capacity of methylamine which partially dissociates in water CH3NH2
Non-electrolyte
Strong electrolyte
Weak electrolyte

for the following chemical reaction, A-164g  B- 144.32 g of carbon dioxide are produced and C- 7.483 x [tex]10^{23}[/tex] molecules of water are produced.

A. According to the balanced chemical equation, 2 molecules of ethane (C2H6) react with 7 molecules of oxygen (O2) to produce 4 molecules of carbon dioxide (CO2) and 6 molecules of water (H2O). So, for every 7 moles of oxygen, 2 moles of ethane will be required.

Therefore, the number of moles of ethane required to react with 175 g of oxygen can be calculated as follows:

moles of O2 = 175 g / 32 g/mol = 5.47 moles

moles of C2H6 = 5.47 moles O2 / 7 moles O2/2 moles C2H6 = 0.784 moles C2H6

One mole of ethane contains 6.022 x[tex]10^{23}[/tex] molecules, so 9.85 x  [tex]10^{24}[/tex] molecules of ethane is equal to:

moles of C2H6 = 9.85 x [tex]10^{24}[/tex] molecules / 6.022 x [tex]10^{23}[/tex] molecules/mol = 1.64 moles C2H6

B- According to the balanced equation, 4 moles of CO2 are produced per 2 moles of C2H6. Hence, the number of moles of CO2 produced can be calculated as follows:

moles of CO2 = 1.64 moles C2H6 * 4 moles CO2 / 2 moles C2H6 = 3.28 moles CO2grams of CO2 = 3.28 moles CO2 * 44 g/mol = 144.32 g

C. To find the number of molecules of water produced, we first need to determine the number of moles of CO2 that have reacted.

moles of CO2 = 36.60 g / 44 g/mol = 0.832 moles\

moles of H2O = 0.832 moles CO2 * 6 moles H2O / 4 moles CO2 = 1.248 moles H2Omolecules of H2O = 1.248 moles H2O * 6.022 x[tex]10^{23}[/tex]molecules/mol = 7.483 x [tex]10^{23}[/tex]molecules.

Learn more about moles here:

https://brainly.com/question/28239680

#SPJ4

65% of the reactant will be consumed in 23.3 seconds. If a first-order reaction has a rate constant of 0.0450 s'.

First order rate law is given by,

A = A0 × e-kt

Given,

A0 = Initial concentration=100 M

A = Final concentration=35 M (65% is consumed means 35% is the remaining compound)

K = Rate constant = 0.0450 s-1​​​​​​

A = A0×e-kt​​​​​​

=>35 = 100 × e-0.0450 * t

=>e-0.0450*t = 0.35

=> - 0.0450*t = ln(0.35)

=> -0.0450*t = -1.05

=> t = 23.3 sec

So, 23.3 seconds will be required to consume 65% of the reactant.

When a reaction's pace and reactant concentration are inversely correlated, the process is known as a first-order reaction. To put it another way, the response rate doubles when the concentration double. One or two reactants can be present in a first-order reaction, as in the case of the decomposition process.

Learn more about Reaction here:

https://brainly.com/question/28984750

#SPJ4

147grams

Hence, The mass of one mole of magnesium nitrate$Mg{(N{O_3})_2}$ is 147grams. Note : The mass of a molecule of a substance is measured in molecular weight, which is dependent on 12 as the atomic weight of carbon-12.

The mass of one mole of magnesium nitrate is 148.3 g/mol. Then the mass of 17 moles of magnesium nitrate is 2521.1 grams.

Any substance containing 6.02 × 10²³ number of its atoms is called one mole of the substance. This number is called Avogadro number. Thus, one mole of every element contains Avogadro number of atoms. The mass of one mole of an element is called its atomic mass.

Similarly one mole of every compounds contains Avogadro number of its molecules. The mass of one mole of a compound is called its molar mass.

Molar mass of magnesium nitrate = 148.3 g/mol

then mass of 17 moles = no.of moles × molar mass.

mass = 17  × 148.3 g/mol  = 2521.2 grams.

Therefore, the mass of 17 moles of magnesium nitrate is 2521.1 grams.

Find more on molar mass:

https://brainly.com/question/22997914

#SPJ2

The correct answer is the correct formula for Magnesium Chloride is MgCl2

An inorganic compound with the chemical formula MgCl2 is magnesium chloride. It generates MgCl2nH2O hydrates, where n can range in value from 1 to 12. These salts are white or colorless solids that are very soluble in water. These chemicals can be found in nature in both their compounds and solutions, and they have a wide range of practical uses. Anhydrous magnesium chloride serves as the primary precursor for the widely produced magnesium metal. Magnesium chloride that has been hydrated is the form that is most readily available. Magnesium chloride may be extracted using brine or saltwater. The Great Salt Lake in North America provides the bulk of the brine used to make it. It is utilized in the Jordan Valley and is from the Dead Sea. The mineral bischofite (MgCl26H2O) is extracted by solution mining from ancient seabeds like the Zechstein seabed in northwest Europe. Some deposits are a result of the high magnesium chloride content of the primordial ocean. Saltwater evaporation causes a little quantity of magnesium chloride to be created.

To learn more about MgCl2 click the link below

brainly.com/question/14715143

#SPJ4

The equation is: 4P + 10O₂ → 2P₄O₁₀

The coefficients in front of each element indicate the number of atoms or molecules of that element in the reaction, making sure that there are the same number of atoms on both sides of the equation.

Equation balancing is the process of writing a chemical equation in such a way that the number of atoms of each element is the same on both sides of the equation. This is important because according to the law of conservation of matter, matter can neither be created nor destroyed, so the total number of atoms of each element must remain constant in a chemical reaction.

To balance a chemical equation, coefficients are placed in front of the chemical formulas to indicate the number of molecules or atoms of each substance involved in the reaction. The coefficients should be adjusted until the number of atoms of each element is equal on both sides of the equation. For example, if a reaction involves two molecules of hydrogen and one molecule of oxygen combining to form two molecules of water, the balanced equation would be written as 2H₂ + O₂ -> 2H₂O.

learn more about equation balancing: https://brainly.com/question/11904811

#SPJ1

In Cell A, there would be 8 chromosomes present at the end of the meiosis process.

Meiosis is a type of cell division that produces four daughter cells from one parent cell. It is a type of nuclear division that occurs in eukaryotic cells and is the process by which gametes (sex cells) are formed. The process of meiosis is composed of two separate divisions called meiosis I and meiosis II. During meiosis I, homologous chromosomes (which contain two copies of each gene) pair up, exchange genetic material, and then separate. This process is called crossing over and it creates genetic diversity. During meiosis II, the sister chromatids (copies of each chromosome) separate and move to opposite ends of the cell.

To learn more about meiosis process

https://brainly.com/question/15295733

#SPJ1

The volumetric flask is used in titration, a process used to determine the unknown concentration of a known solution

The volumetric flask is a glassware piece of laboratory equipment that is used to make precise volume measurements of a liquid. It is also known as a 'measuring flask', and consists of a tapered conical body with a long neck and a flat bottom. The bottom of the flask is usually marked with a calibration mark, which can be used to determine the exact volume of the liquid inside.  The volumetric flask is used in titration, a process used to determine the unknown concentration of a known solution. A burette, filled with the known solution, is used to slowly add the solution to the volumetric flask, containing the unknown solution. As the burette is slowly releasing the solution, a color change will take place as the concentration of the unknown solution is reached. A full reading of the volume in the volumetric flask is then taken, which can be used to calculate the concentration of the unknown solution.

The volumetric flask is also used in general laboratory tasks such as diluting solutions and transferring liquids. The accuracy of the volumetric flask is based on its calibration mark and the accuracy of the liquid inside. It is important to properly clean and store the volumetric flask to ensure accuracy in future measurements.

To know more about volumetric flask  click here:

brainly.com/question/14689335

#SPJ4

The vapor pressure of the solution at 25°C is 72.46 mmHg.

To calculate the vapor pressure of the solution, we can use Raoult's law, which states that the vapor pressure of a solution is equal to the vapor pressure of the pure solvent multiplied by the mole fraction of the solvent in the solution.

The mole fraction of the solvent, benzene, can be calculated as follows:

moles of benzene = mass of benzene / molar mass of benzene

moles of benzene = 187.8 g / 78.11 g/mol = 2.404 mol

moles of cholesterol = mass of cholesterol / molar mass of cholesterol

moles of cholesterol = 7.462 g / 386.6 g/mol = 0.0193 mol

The total number of moles in the solution is the sum of the moles of benzene and cholesterol:

total moles = 2.404 mol + 0.0193 mol = 2.423 mol

The mole fraction of benzene is:

Xbenzene = moles of benzene / total moles

Xbenzene = 2.404 mol / 2.423 mol = 0.9921

The vapor pressure of the solution can be calculated as follows:

Pbenzene-solution = Xbenzene x Pbenzene-pure

Pbenzene-solution = 0.9921 x 73.03 mmHg = 72.46 mmHg

Therefore, the vapor pressure of the solution at 25°C is 72.46 mmHg.

For similar questions on vapor pressure.

https://brainly.com/question/2272852

#SPJ4

This phenomenon is called "reversion", and it occurs when bacteria that are capable of using alternative carbon sources are starved of carbohydrates and begin to use amino acids instead. The resulting production of ammonia can cause an increase in the pH of the medium, leading to false alkaline or pink results.

The medium being referred to in the question is likely to be a microbiological growth medium, which is used to culture and grow microorganisms. In many of these media formulations, carbohydrates are added as a carbon source for the microorganisms.

When the concentration of carbohydrates in the medium is low, certain bacteria that can use amino acids or other nitrogen-containing compounds as a carbon source may produce false positive results after prolonged incubation periods. This is because these bacteria can produce large amounts of ammonia, which can raise the pH of the medium, resulting in the formation of false alkaline or pink results.

To avoid reversion, growth media should be carefully formulated to ensure adequate concentrations of carbohydrates for the target microorganisms, and should be monitored for any changes in pH or color over time.

For such more questions on Formulations

https://brainly.com/question/28240440

#SPJ4

The process of determining the concentration of a solution by slowly adding a known solution to it using a buret is commonly referred to as titration.

Titration is a laboratory technique that is widely used to determine the concentration of a solution. In this method, a buret is filled with a known solution of a specific concentration, often referred to as the titrant. A second solution, called the analyte, is placed in a flask or beaker and an indicator is added to it. The indicator is a chemical substance that changes color or exhibits some other type of visual change when it reacts with the titrant.

The buret is then used to slowly add the titrant to the analyte. The point at which the reaction between the titrant and analyte is complete is indicated by the change in the appearance of the indicator. This change marks the end point of the titration and is used to determine the concentration of the analyte.

Titrations can be performed for a variety of purposes, including determining the amount of an unknown substance in a sample, determining the purity of a substance, and determining the reaction rate between two substances. The technique is particularly useful because it is precise and accurate, and it can be used to determine the concentration of a wide range of substances, including acids, bases, and redox compounds.

Learn more about titration here:

https://brainly.com/question/2728613

#SPJ4

Global warming factor is not a reason for the ozone hole formation in the earth

The Earth is surrounded by greenhouse gases, allowing heat to pass through to the surface but not back out into space. Water vapour (H2O), carbon dioxide (CO2), methane (CH4), CFC-HCF-PHC (also known as F gases, fluorinated hydrocarbons), nitrous oxide (N2O), and sulphur hexafluoride are examples of greenhouse gases (SF6).

The phrase "greenhouse effect" refers to the planet Global warming up as a result of a disruption in the energy balance between the quantity of radiation the Earth receives from the Sun and radiates into space. This impact is caused by an increase in the amount of radiation that is absorbed by the atmosphere and cannot be released into space from the surface of the Earth.

Learn more about Global warming here

https://brainly.com/question/8919004

#SPJ4

Various strategies are used to minimize nitrogen oxide (NOx) emissions, including the installation of catalytic converters and raising the combustion temperature.

A) Catalytic converter installation: Catalytic converters employ a catalyst to enhance chemical processes that convert NOx into nitrogen and oxygen, hence lowering emissions.

B) Higher combustion temperature: Because NOx is created at high temperatures during combustion, lowering the combustion temperature can minimize NOx emissions.

C) Excess oxygen in combustion processes: Excess oxygen in the combustion process can lower NOx emissions.

To summarize, several ways are utilized to minimize NOx emissions, including the installation of catalytic converters, lowering the combustion temperature, supplying additional oxygen to the combustion process, employing fluidized bed combustion, and absorbing pollutants using calcium carbonate.

To know more about nitrogen oxide, visit,

brainly.com/question/28884437

#SPJ4

Based on the mass-to-charge (m/z) ratio, mass spectrometry is a sensitive method for discovering, classifying, and quantifying compounds.MS was first employed in the biological sciences to track heavy isotopes through biological systems. It was developed nearly a century ago to identify elemental atomic weights.

STEP 1: The mass-to-charge ratio of ions is assessed in the analysis of proteins using mass spectrometry (MS) in order to recognise and quantify molecules in simple and complicated mixtures.

Proteomics is one of the many areas and applications where MS has shown to be useful.

In the last two decades, high throughput and quantitative MS proteomics techniques have advanced our understanding of protein structure, function, modification, and overall protein dynamics.

In this overview, the function of mass spectrometry in proteomics, as well as MS methodology and equipment, sample preparation, and liquid chromatography-based separation.

STEP 2: A beam of incoming X-rays is used in X-ray crystallography (XRC), an experimental science, to determine a crystal's atomic and molecular structure by causing it to diffract in a variety of directions due to its crystalline structure.

An image of the density of electrons within the crystal can be created in three dimensions by measuring the angles and intensities of these diffracted beams.

The average positions of the atoms in the crystal, their chemical bonds, the degree of crystallographic disorder, and other data may all be determined using this electron density.

To know more about Mass spectrometry visit:

https://brainly.com/question/26500669

#SPJ1

We must first determine how many moles of element X there are in the sample in order to solve the problem: The atomic mass of element y is 24.31 amu because [tex]27.22 g / 33.42 g/mol = 0.814 mol of x[/tex].

The mass of an atom in a chemical element is referred to as having a "atomic mass," which is a fundamental notion in chemistry. Atomic mass units (amu), which are based on the mass of a carbon-12 atom, are used to measure it. The average mass of all an element's isotopes, taking into account their abundance, is what is known as the atomic mass of that element. The number of protons and neutrons in an atom's nucleus influences its chemical properties, hence the atomic mass of an element is a crucial characteristic. Analytical chemistry has several practical uses for understanding atomic mass, particularly in mass spectrometry and isotope labelling.

Learn more about atomic mass hare:

https://brainly.com/question/13313254

#SPJ4

The work done during the compression of the gas is 615 J.To calculate the work done during the compression of the gas, we can use the formula:

work = -Pext x ΔV

where Pext is the external pressure applied to the gas, and ΔV is the change in volume of the gas.

We first need to convert the volume units from liters to cubic meters, and the pressure units from torr to atmospheres (atm):

8.4 L = 0.0084 m^3

2.17 L = 0.00217 m^3

736 torr = 0.971 atm

Now we can calculate the work done:

work = -Pext x ΔV

work = -0.971 atm x (0.00217 m^3 - 0.0084 m^3)

work = -0.971 atm x (-0.00623 m^3)

work = 0.00604 atm·m^3

Finally, we need to convert the units of work from atm·m^3 to joules (J). 1 atm L is equivalent to 101.325 J, so:

work = 0.00604 atm·m^3 x (101.325 J/atm·L) x (1000 L/m^3)

work = 615 J

Therefore, the work done during the compression of the gas is 615 J.

Find out more about work done

brainly.com/question/30703625

#SPJ4

According to the equation, the dibromide is transformed into the dichloride if the entire conversion of 1.238 g produces 0.735 g of nickel, the atomic mass of the element is 58.693 g/mol.

First, we need to find the number of moles of XBr2 and XCl2 equation. The molar mass of XBr2 is 2 times the atomic mass of the element plus 2 times the molar mass of Br, and the molar mass of XCl2 is 2 times the atomic mass of the element plus 2 times the molar mass of Cl.

Let's call the atomic mass of the element "x". Then the molar mass of XBr2 can be written as: 2x + 2(Br)

And the molar mass of XCl2 can be written as:

2x + 2(Cl)Next, we can use the given masses of XBr2 and XCl2 to find the number of moles of each substance:

Number of moles of XBr2 = 1500 g / (2x + 2(Br))

Number of moles of XCl2 = 0.890 g / (2x + 2(Cl))

Now that we have the number of moles of XBr2 and XCl2, we can use the balanced equation to find the ratio of moles of XBr2 to XCl2:

XBr2 + Cl2 -> XCl2 + Br2

2 moles of XBr2 react to form 1 mole of XCl2.

Number of moles of XCl2 = Number of moles of XBr2 / 2

Finally, we can use the number of moles of XCl2 and its molar mass to find the atomic mass of the element:

M + 159.8/1.5 = M + 70.9/0.89

0.89M + 142.333 = 1.5M +10

35.872 = 0.61M

M= 58.8g/mol

To learn more about moles here:

https://brainly.com/question/28239680

#SPJ4

The correct formula for a reactant in an equation shouldn't be modified once it has been written.

Subscript refers to the small number at the bottom of the symbol. The amount of the element's atoms in the molecule is shown on the right side of the number. A solitary symbol's atomic number is displayed as a subscript in the bottom left corner. Once the right formula for a reactant has been written, the equation's subscripts are adjusted to make it equal. The chemical formulas of the reactants and products, in part, show how many atoms are present in each element.

Learn more about element's here:

https://brainly.com/question/14347616

#SPJ4

From the given information, the formula mass of calcium chloride is 110.98 g/mol, rounded to five significant figures.

To calculate the formula mass of calcium chloride, we need to determine the atomic mass of each element in the compound and then sum them up based on the chemical formula:

Atomic mass of Ca = 40.078 g/mol

Atomic mass of Cl = 35.45 g/mol

The formula mass of calcium chloride (CaCl₂) can be calculated as follows:

Formula mass = (atomic mass of Ca) + 2 x (atomic mass of Cl)

Formula mass = 40.078 g/mol + 2 x 35.45 g/mol

Formula mass = 110.98 g/mol

Learn more about chemical reaction here: brainly.com/question/11231920

#SPJ4

(C.) ch3ch2ch2ch2ch2oh. The option C compound, ch3ch2ch2ch2ch2oh, contains the most -OH groups of the compounds listed, making it the most soluble in water.

The quantity of hydroxyl (-OH) groups a molecule has typically affects how soluble it is in water. The compound in option C, ch3ch2ch2ch2ch2oh, contains the most -OH groups out of all the alternatives, making it the most water soluble.

In comparison to option C, the other two, A and B, are less soluble in water because they contain fewer -OH groups in their molecular structure. Option D, which states that all of these chemicals are equally soluble in water, is false because the molecular structure of an alcohol affects how soluble it is in water, and not all alcohols have the same molecular structure.

learn more about compound here:

https://brainly.com/question/13516179

#SPJ4

The mass of 7,00 × 10²² NaOH molecules is 4,64 gram. 7,00 × 10²² NaOH molecules equal 0.116 moles NaOH.

To find out the mass of 7,00 × 10²² NaOH molecules you can use the following steps

Step 1: The first step is to calculate the number of moles of the compound.

mol = number of particles ÷ Avogadro's number

      = 7,00 × 10²² ÷ 6,022 × 10²³

      = 0,116 mol

Step 2: The next step is to calculate the mass of the molecules.

mass = mol × relative molecular mass

         = 0,116 mol × 40 gram/mol

          = 4,64 gram

So the mass of 7,00 × 10²² NaOH molecules is 4,64 gram.

Learn more about number of particles here: https://brainly.com/question/29367909

#SPJ1

Answer:

Endothermic reaction.

Explanation:

The reactants are at a lower energy rate than the products. Because delta H is positive, energy is absorbed from the surroundings.

 A chemical reaction that prefers one potential structural isomer over one or more other structural isomers is accurately referred to be stereoselective.

A stereoselective reaction favours the creation of a particular stereoisomer over other potential stereoisomers while retaining the stereochemistry of the starting material in the final product. The composition of the reagents and the reaction conditions are only two examples of the many variables that might affect selectivity. A chiral centre or a molecule with the capacity to produce one is referred to as stereogenic. A reaction is referred described as being "regioselective" if one of a molecule's reaction sites is favoured over other reaction sites. In organic chemistry, the word "regiogenic" is not used.

Learn more about stereoselective here:

https://brainly.com/question/28202225

#SPJ4

Since the dipole moment of gaseous AgCl is 11.5 D and the ionic character of AgCl is 78.1%, we can assume that the magnitude of the partial charge is 0.781.

Magnitude is a measure of the size, strength, or intensity of something. It can refer to physical objects, such as earthquakes, or abstract concepts, such as numbers or emotions. In physical sciences, magnitude is typically used to measure an object's size, intensity, or speed. In mathematics, magnitude is often used to indicate the size of a number, usually expressed as the absolute value. Magnitude is also used to describe the size of an emotion or feeling, such as happiness or sadness.

To learn more about magnitude

https://brainly.com/question/30560692

#SPJ1

According to the question 100.3 is the possible boiling point for a 1.0 M solution of sugar in water.

Boiling point is the temperature at which a liquid changes to a gas or vapor. It is the temperature at which the vapor pressure of the liquid becomes equal to the atmospheric pressure. Water boils at 212°F (100°C) at sea level, but the boiling point decreases as altitude increases. Boiling point is an important property of liquids and is used to separate mixtures of liquids, to determine the purity of a substance, and to measure the composition of a mixture of liquids.

100.3 is the possible boiling point for a 1.0 M solution of sugar in water. The boiling point of a solution will be higher than that of pure water due to the increased solute concentration. The increase in boiling point is dependent on the molarity (moles of solute per liter of solution) of the solution. For a 1.0 M solution of sugar, the boiling point should be about 100.3 degrees Celsius.

To learn more about boiling point

https://brainly.com/question/40140

#SPJ1

The chemical composition The empirical formulas for the other three molecular formulas are as follows: C5H12O has the same empirical formula, and OCH5O is COH, OC2H6O is CH3O, and C3H6O is CH2O.

The kind of chemical formula known as an empirical formula represents the simplest atom-to-atom relationship found in a chemical formula. The empirical formula and the molecular formula are generally related in the following way: (Molecular Formula = n Empirical Formula).

The simplest whole-number ratio of the atoms in a compound is shown by empirical formulae, the number of each type of atom in a molecule is shown by molecular formulas, The structural formulas illustrate the bonds that exist between the atoms of a molecule.

To know more about empirical formulas visit:-

https://brainly.com/question/14044066

#SPJ1

Answer:

see below

Explanation:

The number of moles of 33 g of sodium chloride is 0.564 . The volume of ocean water considered is 1 L. Then the molarity of the solution is 0.564 M.

Molarity of a solution is a common term used to express the concentration of a solution. It is the the ratio of number of moles of the solute to the volume of solution in liters.

Given that 1 liter of ocean water contains 33 g of NaCl.

molar mass of sodium chloride = 58.5 g/mol.

no.of moles in 33 g of NaCl = 58.5 /33  = 0.564 moles.

volume of ocean water = 1 L

molarity = no.of moles of solute/volume of solution in L.

= 0.564 mole/ 1 l = 0.564 M.

Therefore, the molarity of the salt in sea water is 0.564 M.

Find more on molarity :

brainly.com/question/2817451

#SPJ1

It's worth noting that the exact composition of the air can vary depending on the location and the time of year, but these substances are the most abundant gases found in the Earth's atmosphere.

The substances in the air you breathe are typically ranked in terms of their abundance as follows:

To learn more about atmosphere refer to this link

https://brainly.com/question/26767532

#SPJ4

In a 1H Nuclear Magnetic Resonance (NMR) spectrum, signals represent different types of hydrogen atoms in a molecule. Each signal represents a group of hydrogen atoms that are chemically equivalent, meaning they have the same chemical environment and experience the same magnetic field.

In a 1H NMR spectrum, the position of each signal is determined by the chemical shift, which is a measure of the deviation of the hydrogen atom's magnetic environment from that of a reference compound. The chemical shift is reported in parts per million (ppm) relative to the reference, usually tetramethylsilane (TMS).The intensity of each signal in the 1H NMR spectrum represents the number of hydrogen atoms in each chemically equivalent group. A strong signal in the 1H NMR spectrum indicates a large number of hydrogen atoms, while a weak signal indicates a smaller number of hydrogen atoms.

To learn more about NMR spectrum here:

https://brainly.com/question/29389817

#SPJ4

Answer:

physics teacher walks 4 meters East, 2 meters South, 4 meters West, and finally 2 meters North. Even though the physics teacher has walked a total distance of 12 meters, her displacement is 0 meters. During the course of her motion, she has "covered 12 meters of ground" (distance = 12 m).

The physics instructor has walked a total of 8 metres. Applying the Pythagorean Theorem will reveal this. According to the theorem, the square of the hypotenuse, the longest side of a right triangle, is equal to the sum of the squares of the other two sides.

The overall distance travelled in this instance is the hypotenuse, and the lengths travelled in the east-west and north-south directions are the other two sides. Eight metres, or 4 metres East + 4 metres West, have been covered in an east-west direction.

A total of 8 metres, or 2 metres South + 2 metres North, have been covered in a north-south direction. The total distance travelled is therefore equal to the square root of 8 metres is equal to 8 squared times 8 squared.

By dividing the overall distance travelled into its component parts, this may also be established. The sum of the distances in each direction is the total distance travelled. In this instance, the total distance travelled is 12 metres, or 4 metres east, 2 metres south, 4 metres west, and 2 metres north. The overall distance travelled is 12 metres minus the 8 metres in the East-West direction, which equals 8 metres.

However, because the instructor travelled 4 metres East and 4 metres West, the total distance travelled is really 8 metres.  

Learn more about distance travelled   at:

https://brainly.com/question/509450

#SPJ2

The greater the speed of gas particles in a container, the greater the pressure which is therefore denoted as option A.

This is referred to as the force applied perpendicular to the surface of an object per unit area. It is also the continuous physical force which is exerted on or against an object by something in contact with it.

In a scenario where the speed of gas particles in a container then it means that the pressure which would be exerted on the containers will be greater due to the increased collission between thereby making option A the correct choice.

Read more about Pressure here https://brainly.com/question/15215203

#SPJ1