Answer:
2.6% annual change (2021)
Hope it helped! :)
12.2.2 Quiz: World War II Begins
Question 1 of 10
Because of the Tripartite Pact, Japan:
A. attacked the Chinese at the Marco Polo Bridge.
B. invaded even more territory in Asia.
C. began a full-scale invasion of China.
D. considered an alliance with Germany and Italy.
World War II Begins because of the Tripartite Pact, Japan invaded even more territory in Asia. Thus, option (b) is correct.
What is World War II?Due to the involvement of more than 30 nations, the Second World War was the largest war in ancient history when compared to the First World War. From 1939 to 1945, during World War II, Germany was at war with Great Britain and France.
During the period of World War II, Tripartite Pact, Japan's goal for an Asian empire. Japan's aim to invaded even more territory in Asia. There are the two European dictators approved.
As a result, the significance of the World War II are the aforementioned. Therefore, option (b) is correct.
Learn more about on World War II, here:
https://brainly.com/question/1449762
#SPJ1
what is Fairtrade Canada's goal?
answer the following questions
1. What is the purpose of photogrammetry?
2. Why are UAV stereo images taken with very high degree of overlap?
3. Identify four differences between vertical and oblique photos
4. Explain the purpose of fiducial marks on an aerial photo
5. What causes stereoscopic parallax?
6. Explain the difference between absolute stereoscopic parallax and differential parallax
7. Explain the following equation
a. h = (H’) * dP / (P + dP)
b. h = (H’) * d / (r)
c. H’ = (h * r )/ d
8. What is the importance of stereoscopic vision in remote sensing?
9. State two ways by which stereo viewing can be done
10. Explain the following equation δr= ∗ℎ
11. What is the purpose of orthorectification?
12. What is the acceptable difference between initial and the computed camera position and how can the difference be minimized?
13. Which data in the pix4d quality report indicates that there are significant overlaps between the images?
14. Which data in the pix4d quality report indicates that there are significant matches between the tie points?
15. Which section of the pix4d quality report indicates the positional deviations associated with your data?
16. Provide an explanation of what occurs during Stage one processing of UAV images.
17. What is the purpose of Stage two processing of UAV images in Pix4D?
18. Identify five different products that can be generated from Pix4D and explain what they are and how they can be used by geographers.
19. Explain two ways by which the accuracy of the 3D models generated by Pix4d can be improved.
20. Explain why it is important to accurately reclassify a point cloud.
1. The purpose of photogrammetry is to measure and create accurate 3D models and maps using photographs.
2. UAV stereo images are taken with a very high degree of overlap to provide a sufficient number of tie points for accurate 3D modeling.
What are the responses to other questions?3. Four differences between vertical and oblique photos are:
vertical photos are taken from directly above the target area while oblique photos are taken at an angle, vertical photos have a constant scale while oblique photos do not, vertical photos provide more information on the height of objects while oblique photos provide more information on the shape of objects, and vertical photos are typically used for mapping while oblique photos are used for visual inspection and interpretation.4. Fiducial marks on an aerial photo serve as reference points for photogrammetric measurements, providing a means of scaling and orienting the photograph.
5. Stereoscopic parallax is caused by the displacement of an object's position between two images taken from different angles.
6. Absolute stereoscopic parallax refers to the displacement of an object relative to the ground, while differential parallax refers to the displacement of an object relative to other objects in the scene.
7. a. h = height of object, H’ = height of object in the photo, dP = parallax, P = principal distance
b. h = height of object, H’ = height of object in the photo, d = distance between photos, r = parallax
c. H’ = height of object in the photo, h = height of object, r = parallax, d = distance between photos
8. Stereoscopic vision in remote sensing is important because it allows for the creation of accurate 3D models and measurements of the Earth's surface.
9. Two ways to view stereo images are through the use of a stereoscope or by using anaglyph images.
10. The equation δr = h*f / B relates the shift in apparent position of an object in two images to the object's height above the ground, the focal length of the camera, and the distance between the two images.
11. The purpose of orthorectification is to remove distortions caused by terrain relief and camera tilt in aerial imagery, resulting in a more accurate and consistent representation of the Earth's surface.
12. The acceptable difference between initial and computed camera positions depends on the accuracy requirements of the project, but in general, a difference of less than one pixel is considered acceptable. The difference can be minimized by using high-quality ground control points and accurate camera calibration.
13. The data in the pix4d quality report that indicates significant overlaps between images is the "Image Properties" section, which shows the number and percentage of overlapping images.
14. The data in the pix4d quality report that indicates significant matches between tie points is the "Tie Points" section, which shows the number and distribution of tie points across the project area.
15. The section of the pix4d quality report that indicates the positional deviations associated with data is the "Quality Check" section, which shows the accuracy of the camera positions and the level of geometric distortion in the data.
16. During Stage one processing of UAV images, the images are calibrated, matched, and a sparse point cloud is generated.
17. The purpose of Stage two processing of UAV images in Pix4D is to generate a dense point cloud, 3D mesh, and orthomosaic using the sparse point cloud and images.
18. Five different products that can be generated from Pix4D are:
Orthomosaic: A high-resolution orthorectified image of the survey area, which can be used for mapping, land-use planning, and visual analysis.Digital Elevation Model (DEM): A 3D representation of the survey area, which can be used for terrain analysis, hydrology, and volumetric calculations.Point Cloud: A collection of 3D points that represent the surface of the survey area, which can be used for modeling, measurement, and visualization.Contour Lines: A vector representation of the elevation data in the survey area, which can be used for mapping and visualization.3D Mesh: A 3D surface model of the survey area, which can be used for visualization and analysis.19. Two ways by which the accuracy of the 3D models generated by Pix4D can be improved are:
Increasing the Ground Control Point (GCP) density: GCPs are surveyed points with known coordinates used to improve the accuracy of the 3D model. Increasing the GCP density can improve the accuracy of the 3D model.
Using high-precision Global Navigation Satellite System (GNSS) receivers and inertial measurement units (IMUs) to georeference the images: High-precision GNSS receivers and IMUs can provide more accurate information about the camera's position and orientation, which can lead to a more accurate 3D model.
learn more about Stereoscopic parallax: https://brainly.com/question/29823949
#SPJ1
5 things that would impact or different on earth if the oceans were not salty
Life on earth is based on a salt-water metabolism.
A world without salt water would be a boon to humanity, but it would also decimate marine life and affect our global temperature and weather dramatically, making human life on Earth incredibly complicated.
5 Things that would impact or be different on earth if the oceans were not salty are:
1. An ocean without salt would decimate marine life and affect our global temperature and weather dramatically, making human life on Earth incredibly complicated.
2. Marine life- If the sea were to become desalinated, we’d likely never get the chance to find those new forms of life.
3. World weather- This would be most noticeable at the Equator since our ocean currents would no longer circulate warm water and air currents the way they used to.
4. Plant- marine plant life would also be affected. Underwater algae account for almost half the photosynthesis occurring on this planet.
5. Salt reductions- A liter of seawater contains around 35g of dissolved salt, so desalinating the entire ocean would involve removing 45 million billion tons of salt.
To learn more about Oceans,
https://brainly.com/question/29464002
Earth Science
What does grain size in a sedimentary rock reveal about its history? Explain your answer. Give an example.
Rounded sediment tells you that the rocks traveled quite some distance, rolling around and bumping into each other. The larger the grain size the quicker the sediment was moving and depositing.
Explain the term grain size.
The diameter of a single grain of silt or the lithified particles in clastic rocks is known as grain size (or particle size). Other granular substances may also be covered by the phrase. The crystallite size, on the other hand, refers to the size of a single crystal inside a particle or grain. There are several crystals that can make up a single grain. From very tiny colloidal particles, to clay, silt, sand, gravel, and cobbles, to boulders, granular material can come in a variety of sizes.
In the American Wentworth scale (also known as the Udden-Wentworth scale), size ranges provide the upper and lower bounds of the classes that are assigned names. The Wentworth scale was modified by W. C. Krumbein to create the Krumbein phi () scale.
To study more about grain size.
https://brainly.com/question/18882102
#SPJ1
Groundwater is a better source of water because pumping this source does notimpact streams and wetlands. True or False
True Groundwater is a better source of water because it is unaffected by pumping and does not affect wetlands or streams.
Which is Superior? Surface water or groundwater?As long as the sources are unpolluted and the water is sufficiently treated, both surface water and groundwater can generally provide safe drinking water. There are numerous advantages to using groundwater over surface water.
Does groundwater have an impact on streams?Water is discharged into rivers and streams either directly through river beds and banks or indirectly through springs as groundwater tables rise in the winter and spring. Many of California's rivers and streams continue to flow long after the rain has stopped.
How does pumping affect groundwater?By either intercepting groundwater flow that discharges into the surface-water body under natural conditions or by increasing the rate of water movement from the surface-water body into an aquifer, groundwater pumping can alter how water moves between an aquifer and a stream, lake, or wetland.
To learn more about Groundwater here:
https://brainly.com/question/14241380
#SPJ4
Part A Match the words in the left column to the appropriate blanks in the sentences on the right. Make certain each sentence is complete before su your answer. ► View Available Hint(s) Reset Help clockwise In the Northern Hemisphere, surface air moves a high-pressure system and counterclockwise a low-pressure system. Surface air motion is in a high- into pressure system and in a low-pressure system. out of Submit de Feedback
In the Northern Hemisphere, surface air moves clockwise in a high-pressure system and counterclockwise in a low-pressure system. Surface air motion is out of a high-pressure system and into a low-pressure system.
The movement of air in the atmosphere is affected by differences in air pressure. High-pressure systems are areas where the air pressure is higher than the surrounding areas, while low-pressure systems are areas where the air pressure is lower than the surrounding areas.
In the Northern Hemisphere, the Coriolis effect causes the surface air to move clockwise around a high-pressure system and counterclockwise around a low-pressure system. This means that in a high-pressure system, the surface air is moving outwards away from the center of the system, while in a low-pressure system, the surface air is moving inwards towards the center of the system.
As the air moves from high-pressure to low-pressure areas, it creates winds. The stronger the pressure gradient (difference in pressure between two points), the stronger the winds will be. Understanding the direction of surface air movement is important for predicting weather patterns, as different air masses with different pressures can create various weather conditions, such as thunderstorms, hurricanes, or clear skies.
To learn more about high-pressure system, click here:
https://brainly.com/question/14781863
#SPJ4
Why is understanding the structure of the earth important
Answer:
because it showas how the things work
Two landscaping companies made bids on the landscaping of a new apartment complex. Company A bid $596,000 for materials and plants and $169,000 for labor.
Company B bid $539,000 for materials and plants and $170,000 for labor. How much lower was the bid made by Company B?
The amount lower than the bid made by Company A, that was made by Company B is $ 56, 000
How to find the amount ?To find the amount made, you first need to find the amount that Company A made as a bid which is :
= Materials + Labor
= 596, 000 + 169, 000
= $ 765, 000
The amount made by Company B as a bid was :
= 539, 000 + 170, 000
= $ 709, 000
The difference is therefore :
= 765, 000 - 709, 000
= $ 56, 000
Find out more on bids at https://brainly.com/question/28106407
#SPJ1
A mid latitude cyclone is steered driven by the
Answer:
Explanation:
A mid-latitude cyclone, also known as an extratropical cyclone, is a type of weather system that forms in the middle latitudes and can bring significant impacts to the areas it affects. These cyclones are driven by the wind patterns in the mid-latitudes and are influenced by several meteorological factors.
The prevailing westerlies, which are winds that blow from the west to the east in the mid-latitudes, play a key role in steering these cyclones. The westerlies can cause a mid-latitude cyclone to move from west to east across the middle latitudes.
The pressure gradient, which is the difference in atmospheric pressure between two points, also affects the movement of mid-latitude cyclones. As the pressure gradient increases, the winds become stronger, which can help to steer the cyclone.
The Coriolis effect, which is the result of the earth's rotation, also plays a role in the movement of mid-latitude cyclones. The Coriolis effect causes the winds to turn to the right in the northern hemisphere and to the left in the southern hemisphere, which can cause the cyclone to turn and move in a particular direction.
The position of high and low pressure systems can also influence the steering of a mid-latitude cyclone. For example, if a strong high-pressure system is located to the east of the cyclone, it can cause the cyclone to move towards the east.
In general, mid-latitude cyclones bring precipitation, strong winds, and sometimes severe weather to the areas they impact. They can cause significant disruptions to daily life, including flight cancellations, power outages, and road closures. It is important to stay informed and to take necessary precautions when a mid-latitude cyclone is expected in your area.
Theory that upholds the big bang Theory but suggests there was an extremely rapid expansion or inflation milliseconds after the big bang.
Theory of an oscillating world. According to this hypothesis, there is a big crunch for every big bang. Theory of an oscillating world.
What are some examples of oscillate?
The movement of a simple pendulum in a clock and the tides in the sea are the two most typical instances of oscillation. The oscillation of springs is another illustration. Oscillations can also be seen in the vibration of guitar strings and other stringed instruments. Synonyms for oscillate include fluctuate, sway, swing, undulate, vibrate, and waver. While all of these phrases refer to "moving from one way to its opposite," oscillation emphasises a typically predictable change in direction. a rotating fan.
Know more about pendulum Visit:
https://brainly.com/question/29702798
#SPJ1
Find the length of the missing side in the right triangle shown below.
Divide the first side's length by the second side. To determine the angle between the two sides, find the inverse tangent of the quotient. To get the triangle's third side, divide the triangle's first side's length by the sine of the angle. provide two sides
If leg an is the missing side, change the equation such that an is on one side and compute the square root of that number: a = √(c² - b²)
Leg b is equal to (c2 - a2) if leg b is unknown.
The equation is c = (a2 + b2) for the hypotenuse c that is absent.
You can locate the third side or any third angle for a right-angled triangle using the calculator for the missing side of a right triangle.
Learn More About right triangle
https://brainly.com/question/2217700
#SPJ1
Is this statement true or false?
Japan is located to the east of China.
It is bordered on the west by the Sea of Japan, extending from the Sea of Okhotsk in the north toward the East China Sea, Philippine Sea, and Taiwan in the south.
how could the assassination of Franz Ferdinand have been avoided?
Answer:
.
Explanation:
He probably could have avoided his assassination. Franz Ferdinand ignored warnings that Serbian terrorist group the Black Hand — still reeling from Austrian annexation in 1908 — was plotting to assassinate him during his state visit to Sarajevo. Plus, the day of his tour was Serbia's National Day.
what is the purpose of photogrammetry
Answer:
The purpose of photogrammetry is to create accurate, three-dimensional representations of objects, landscapes, and structures, and to extract meaningful information from images.
Explanation:
Some of the main applications of photogrammetry include:
Surveying and mapping: Photogrammetry is used to create maps, measure distances and elevations, and calculate areas and volumes of objects.Engineering and construction: Photogrammetry is used to assess and document construction sites, monitor progress, and detect deformations and deviations from plans.Architecture: Photogrammetry is used to create accurate models of buildings and structures, and to support the design and analysis of architectural projects.Environmental monitoring: Photogrammetry is used to monitor changes in natural landscapes and the environment, such as vegetation growth, erosion, and flooding.Cultural heritage: Photogrammetry is used to document, preserve, and restore historical and cultural landmarks, including monuments, sculptures, and architectural heritage.coulde you please help me out yall
Answer:
Explanation:
Answer:
i got u i have your email
Step-by-step explanation:
lesson plan for geography grade 10 term one
INFORMATION GENERAL;
Content GENERAL;
Teaching methods,
Teaching methods,
ASSUMED PRIOR KNOWLEDGE
The diversity of natural and cultural landscape aspects will be emphasised as students obtain factual information about the world and its areas. They will also be familiar with some fundamental principles, definitions, and topics in the
Students will have a greater sense of global awareness and geographic literacy. They will succeed in achieving one of the objectives of a liberal arts education, which is to create informed citizens capable of understanding the unique contribution that geography makes to the political, economic, and social life of other nations. They will be able to apply spatial analysis to assist explain some of the major regional problems of the present, especially geopolitical, economic, social .
LEARN MORE ABOUT lesson plan
https://brainly.com/question/28509680
#SPJ1
What is a topographic map, and what does it show you?
A topographic map is a detailed and accurate representation of man-made and natural features on the Earth's surface.
There are various types of maps for various purposes. Topographic maps identify different ground features like Relief(mountain, slope), Hydrography(lakes, river), Vegetation, Boundaries, Transportation ways etc. The topographic map is a two-dimensional representation of the Earth's three-dimensional landscape. Therefore, a map will never be entirely up to date. Changes may take place in landscape features regularly resulting in maps becoming dated, although the rate of agedness varies depending upon location.
Topographic maps are based on topographical surveys. They are used in geographic planning, mining and other earth based endeavors. Hikers use topographic maps to find trails and the steepness of slopes to plan their ascent.
To read more about the Uses of Maps:
https://brainly.com/question/12942045
Early in the 20th Century chemists created a new formulation for gasoline that made engines run much smoother by adding dissolved mercury.a. trueb. false
False. Mercury was never added to gasoline as a fuel additive to improve engine performance.
The claim that early 20th-century chemists added dissolved mercury to gasoline to improve engine performance is false. While chemists did experiment with various additives to improve the properties of gasoline, including lead-based compounds and oxygenates such as ethanol and methanol, there is no record of mercury being used for this purpose.
In fact, mercury is a highly toxic metal that can cause serious health problems, including neurological damage, when ingested or inhaled. As a result, the use of mercury in any form as an additive has been banned in many countries, including the United States.
Furthermore, it is important to note that the use of gasoline additives, in general, has come under scrutiny due to their potential adverse effects on human health and the environment. While some additives, such as detergents and antioxidants, are still commonly used, others like lead and MTBE have been phased out or banned altogether. The use of alternative fuels and electric vehicles is also being explored as a way to reduce the environmental impact of transportation.
To learn more about gasoline, click here:
https://brainly.com/question/29991915
#SPJ4
How does global warming connect to human geography?
Global warming has a significant impact on human geography, as it affects many aspects of human life, including population distribution, urbanization, migration, and economic activity.
How global warming connects to human geographyPopulation Distribution: Changes in temperature and weather patterns as a result of global warming can cause population shifts, as people move away from areas affected by natural disasters, such as hurricanes, floods, and droughts, to safer regions.
Urbanization: The effects of global warming can lead to an increase in urbanization, as people flock to cities for greater access to resources and services, as well as to escape the impacts of global warming in rural areas.
Migration: Climate change is causing people to migrate, both within their own countries and across borders, as they seek to escape the effects of natural disasters, rising sea levels, and changing weather patterns.
Economic Activity: Global warming can disrupt economic activities, such as agriculture, fishing, and forestry, which rely on stable climates and predictable weather patterns. As a result, communities that depend on these industries may face economic hardship, leading to further migration.
Learn more about global warming at:
https://brainly.com/question/26402403
#SPJ1
write the following word scale as a ratio scale.one centimetre on the map represents 100 centimetres on the ground.
What does the 1:100 scale mean?
A 1:100 scale represents an object or subject that is 100 times smaller than its true world size of 1. As a result, while reading this scale, 1 unit is comparable to 100 units.
A 1:100 scale is most typically coupled with millimeters, cementers, and/or meters when used with metric units, and may be used for map reading, where a 1cm measurement would be equal to 1 meter (100 times bigger) when measured with a scale rule.
1 centimeter (on the map) equals 100 m (on the ground)
Take the left side of the ratio, then the right side, multiplies each by 1 cm on the ratio scale.
Then there's 1 centimeter: 10000 cm.
1 m equals 100 cm
As a result, 1 centimeter (on the map) Equals 100 m (on the ground).
To learn more about ratio scale:
https://brainly.com/question/2429309
Correct Question:
Write the following word scale as a ratio scale. 1 centimetre on the map represents 100 metres on the ground.
after the ice melted how was the sand in the first tray
When the ice melted and slid across the sand, it moved the sand in several spots, which the water carried, causing erosion.
When the ice melts, what happens next?Never will the entire planet be submerged. But they would be extremely different from our shores. Sea level would increase by around 70 metres if all the ice on Antarctica, Greenland, and in mountain glaciers across the world melted (230 feet). All the coastal cities would be covered by the ocean.
What is the temperature doing now that the ice has melted?Ice melting is a phase change process. Hence, all of the thermal energy provided to the ice during this process is utilised to change its phase from solid to liquid.
To know more about ice melted visit :-
https://brainly.com/question/28309945
#SPJ1
Which parts of the world has no forests? Explain this.
what is the capital city of Nigeria?
Answer: Abuja
Explanation: Abuja is the capital of Nigeria. Abuja is located in the middle of the country; Nigeria. I hope this helped!
Answer:
the capital of Nigeria is Abuja
Use evidence from the graph to support the statement that 81% of the energy used in the United States in 2014 was fossil fuel energy
Wrong
Answer:
Explanation:
Almost everything that you read will have a subject, main idea and details. It may help to imagine these characteristics as big, medium and small.
The subject of a book is big and broad. Try asking yourself, "What is this book about?" and answering in a few words.
Read the following passage.
The ability to vote is one of the most important rights in a democracy. People should be able to vote easily, and voting laws should be written to make sure that the largest number of people are able to vote. Voting stations should be easy to get to and should be open early enough and late enough so that everyone has time to vote.
What is the subject of the passage?
A
the ability to vote
B
The ability to vote is an important right.
C
Voting stations should be easy to get to.
D
People should be able to vote easily.
Answer:
D
people should be able to vote easily
Explanation:
no explanation.
Answer: A. the ability to vote
Explanation: The subject of the passage is "the ability to vote." This is the main topic or idea that the passage is focused on. The passage discusses the importance of voting rights in a democracy, the need for voting laws to ensure easy access to voting, and the availability of voting stations. All of these details support the main subject of the passage, which is the ability to vote.
The majority of the Earth’s atmosphere (mass) and highest area of pressure is found in the _________.
a.
Stratosphere
b.
Troposphere
c.
Thermosphere
d.
Mesosphere
Answer:
b. Troposphere
Explanation:
According to the pie chart, which function consumed the largest portion of government expenditures in 2003?
A.
providing retirement income for older citizens
B.
improving roads, bridges, and other infrastructure
C.
providing health care for older and poor citizens
D.
paying the interest on the national debt
E.
improving education and training for poor citizens
The providing retirement income for older citizens function consumed the largest portion of government expenditures in 2003. The correct option is (A).
What do you mean by government expenditures?The government spends money on the provision of goods and services that are not offered by the private sector but are crucial for the wellbeing of the country.
Pension transfer payments are a fixed part of fiscal policy, but unemployment benefits fluctuate with the state of the economy, depending on whether it is in a recession or an expansion.
Public consumption, public investment, and transfer payments made up of capital transfers and income transfers (pensions, social benefits), collectively referred to as government expenditures, are all included in the definition of goods and services.
Therefore, In 2003, the function of providing retirement income for senior adults accounted for the majority of government spending.
To know more about the government expenditures, visit:
https://brainly.com/question/14270854
#SPJ9
Answer: A
Explanation:
Examples of upper and lower middle developing economies
China, Malaysia, Russian Federation, Albania, and South Africa are some examples of upper-middle developing economies. Meanwhile, India, Algeria, Vietnam, Nepal, and Morocco are instances of lower-middle developing economies.
What is a higher middle-income country?Forty-five nations have been merged to form the high-income countries group, according to World Economics. All nations with a gross national income per capita higher than $12,055 are categorized as high-income. Upper-middle-income economies are those with a GNI per capita that is greater than $4,125 but less than $12,736 as determined using the World Bank Atlas approach.
The World Bank Atlas method defines high-income economies as having a GNI per capita of $12,736 or higher. The geography, size, population, and income levels of middle-income countries are extremely varied, ranging from very small nations with small populations.
To learn more about developing economies, visit:
https://brainly.com/question/10255059
#SPJ1
Why is understanding he Structure of the earth important.
Understanding the structure of the Earth is important for several reasons:
Natural disasters: Understanding the structure of the Earth helps us predict and prepare for natural disasters such as earthquakes and volcanic eruptions. By studying the Earth's structure, geologists can identify areas that are prone to earthquakes or volcanic activity, and warn people living in those areas to take necessary precautions.Natural resources: Understanding the structure of the Earth is important for identifying and extracting natural resources. By studying the Earth's structure, geologists can identify areas that are likely to contain minerals such as gold, silver, and copper, and oil and natural gas.Climate: Understanding the Earth's structure is also important for studying climate change. The Earth's structure affects the way heat and energy are distributed throughout the planet, and understanding this distribution is key to predicting how climate patterns will change in the future.Plate tectonics: Understanding the Earth's structure is also important for studying plate tectonics, which is the study of the movement of the Earth's tectonic plates. Plate tectonics plays a major role in the formation of mountains, the opening of ocean basins, and the occurrence of earthquakes and volcanic eruptions.Overall, understanding the structure of the Earth is essential for a wide range of scientific fields, and has practical implications for everything from disaster preparedness to resource extraction to climate change research.
