Provide the elemental symbols for lead, iron, gallium, and tungsten respectively.
Answers
Related Questions
4. Circle the letters of elements that are required for a measurement to
make sense.
a. scientific notation
b. numbers
с. exponents
d. units
Answers
Answer:
(b) numbers and (d) units
Explanation:
To measure any quantity, numbers and units are required. It can be understood with an example.
We measure a length of a piece of wood as 5 cm. In this case 5 is a number and centimeters or cm is a unit in which we measure its length. It means for any measurement, number and units are important elements that are required to make sense.
Hence, the correct options are numbers and units.
As the temperatures increase density generally ?
A. Increase
B. Decrease
C. Remain same
Answers
If a liquid has a volume of 5800 mL and you need the mass in Liters, will the number appear to
become smaller or larger?
Answers
Answer:
The number will appear to become smaller (from 5800 mL to 5.8 L).
Explanation:
The conversion of milliliters to liters is the following:
1 L = 1000 mL
Hence, the volume of 5800 mL to L is:
[tex] V = 5800 mL*\frac{1 L}{1000 mL} = 5.8 L [/tex]
Therefore, the number will appear to become smaller (from 5800 mL to 5.8 L).
I hope it helps you!
Which statement best describes the movement of Wind?
A. air moves from high pressure to low pressure
B. air moves from high temperature to low temperature
C. air moves from high volume to low volume
Answers
Answer:
A. Air moves from high pressure to low pressure
A sample in lab displaces 15 mL of water in a graduated cylinder. When placed on a scale the mass is 8.7 g. What is the density of the sample.
Answers
Answer:
0.58 g/mLExplanation:
The density of a substance can be found by using the formula
[tex]Density = \frac{mass}{volume} [/tex]
From the question
volume = 15 mL
mass of object = 8.7 g
We have
[tex]Density = \frac{8.7}{15} [/tex]
We have the final answer as
0.58 g/mLHope this helps you
What could J. J. Thomson conclude from his experiments? Atoms are mostly empty space. Most of the mass of the atom is concentrated in the center. Atoms must balance positive and negative particles. Atoms are indivisible.
Answers
Answer:
atoms must balance positive and negative particles
Explanation:
Answer:
C: Atoms must balance positive and negative particles.
Explanation:
How did scientists find out about the the evolution of the atmosphere?
Answers
Which of the following describes a reference point?
A. The point at which the direction of motion changes
B. The center point of a grid
C. The position of an object after its motion has stopped
D. The location of an object before its motion begins
Answers
Answer:
A.The point at which the direction of motion changes
The point at which the direction of motion changes is described as a reference point.
What is motion?
Motion is defined as a phenomenon which is described with respect to change in object's position with respect to time.It is given in terms of displacement,velocity,distance ,acceleration,speed.
Branch of physics which deals with motion of objects without any reference to it's cause is called kinematics while the branch which studies forces and their effects on motion is called as dynamics.
Motion applies to various systems like objects,bodies, matter particles ,radiation ,curvature.There are three laws of motion which are proposed by Newton.Classical mechanics is based on Newton's law of motion.Relativistic mechanics is based on modern kinematics.
Learn more about motion,here:
https://brainly.com/question/22810476
#SPJ6
what is a hypothesis?
Answers
Answer:
A suggested solution for an unexplained occurrence.
Explanation:
A hypothesis is an educated guess, because you don't know what will happen / what is going to happen, you are just making a guess on what you think will happen. It is a solution for an unexplained occurrence.
The more gravity pulls down on an object the less the object weighs true or false
Answers
false
Explanation:
The more gravity pulls down on an object it gets heavier. Weight is just the amount of force gravity is putting on something. So if gravity is pulling it down more ut would get heavier.
Answer:
False
Explanation:
The move gravity there is pulling on something, the more it'll weigh. The less gravity something or someone has, the less they will weigh. For example, on the moon things weigh less because there is less gravity pulling on objects.
electrovalent compounds are electrolysed but covalent compounds are not electrolysed, why ?
Answers
..so plz like it and follow me ♥
Why is it better to mix drops of solutions in a reaction plate rather than to mix milliliters of a solution in a flask?
Answers
Explanation: Hey Sonia, I see I'm not the only one at school struggling in Chem. My best guess is to minimize the likelyhood and size-amount of a chemical reaction.
How much is one liter
Answers
Answer:
1 litre = 1000 millilitres
If brass is 25% copper, how many grams of copper are in 12 grams of brass
Answers
Consider the statement below.
“When nitrogen is liquefied, heat is released.”
Is this statement true or false?
Answers
Answer:
True
Explanation:
It is true because heat is released when a gas changes to a liquid.
Answer:
True
Explanation:just took the test
In terms of particles, what is the mass number equal to? (The mass is 12)
Answers
Answer:
The number of protons plus the number of neutrons
Explanation:
Answer:
The mass number is equal to the total number of protons and neutrons in the nucleus of an atom.
Explanation:
*BRAINLIEST* Is calcium nitrate solution an element, compound, homogenous mixture, or heterogeneous mixture?
Answers
Answer:
It's a compound.
Answer:
Homogeneous mixture.
Explanation:
All solutions are homogeneous mixtures; therefore, a calcium nitrate solution would be a homogeneous mixture.
Name the four types of friction. Provide one example not used in your lesson for each type.
Answers
B. Which of the following compounds can
NOT demonstrate the law of multiple
proportions ?
a. NO, NO
b. CO, CO2
c. H,O, H,O2
d. Na2S ,NaF
1
11
Answers
Answer:
The correct answer is:
d. Na2S, NaF
Answer:
CO2
Explanation:
Explain why all models have limitations.
Answers
Explanation:
The limitations of model based on Experimental design and parameter
All models have limitations because they simplify complex real-world phenomena, omitting certain details or factors to make them manageable and understandable.
Limitations of modelsAll models have limitations because they are simplified representations of complex systems or phenomena. To make models more manageable and understandable, certain details, variables, or interactions must be excluded.
This simplification can lead to discrepancies between the model and reality, limiting its accuracy and applicability. Additionally, models are often based on existing knowledge, which may be incomplete or subject to change.
As a result, models serve as valuable tools for understanding and prediction but should be used with caution, acknowledging their inherent simplifications and potential shortcomings when applied to real-world scenarios.
More on models can be found here: https://brainly.com/question/33240027
#SPJ6
what does 2 in the chemical formula CaCl2 mean?
Answers
Answer:
The answer is
Explanation:
Calcium chloride is created from the ionic bonds that form between calcium cations and chloride anions. Calcium ions have a charge of +2, while chloride ions have a charge of -1. Calcium chloride salts can also form crystals based on these same ionic properties.
Hope this helps.
Please mark my answer as brainliest?
If the chemical properties of a substance remain unchanged and the appearance or shape of an substance changes it is called a
a.Chemical change
b.Physical change
c.Chemical Property
d.Both a physical and chemical change
e.Neither a physical or chemical change
Answers
Answer:
B
Explanation:
physical change is the answer I hope
Answer:
A
Explanation:
it is A because i am really smart
how do you convert L to mL
Answers
Answer:1 Liter (L) is equal to 1000 milliliters (mL). To convert liters to mL, multiply the liter value by 1000. For example, to convert 2 liters to mL, multiply 2 by 1000, that makes 2000 mL is 2 L.
Explanation:
Chlorine-
What is the mass number of this element?
How many neutrons?
Answers
Answer:
Chlorine is a chemical element with atomic number 17 which means there are 17 protons and 17 electrons in the atomic structure. The chemical symbol for Chlorine is Cl. Neutron Number and Mass Number of Chlorine Mass numbers of typical isotopes of Chlorine are 35; 37.
Explanation:
Atomic number(#of protons): 17
To get the number of neutrons you must subtract the atomic number (#of protons) from the atomic mass which is 35.
35-17=18
Therefore the number of neutrons is 18.
This is because each proton and neutron have a relative mass of one unit.
How are a carrot, an amoeba, and a bacterium alike?
They are all made of cells.
They are eukaryotes.
They are prokaryotes.
They all live in soil.
Answers
Answer:
They all are made up of cells
Answer: They are all made of cells.
Explanation:
does anybody knows the field in science for the levels of organization
Answers
Answer:
Taxonomy
Explanation:
Taxonomy is the science of naming, describing and classifying organisms
i hoped this helped you!
Please help me answer all of this! (Will give brainliest answer and hearts) Please and thank you!
Answers
Answer:
Hi there!
Your answers are:
1. Physical
2. Chemical
3. Chemical
4. Chemical
5. Chemical
6. Physical
7. Physical
8. Chemical
Explanation:
Physical, aka mechanical, digestion occurs due to ACTIONS from the body! This can be contracting muscle walls to move it along or the use of teeth to crush food. Chemical digestion is due to some acid or chemical that the body makes! This breaks down food so the body can process it.
I hope this helps!
I have a block of gold and the density is 13.54g/ml If I cut the block in half what is the density of the smaller pieces of gold
Answers
Answer:
Density is the same
Explanation:
The density remains the same because cutting the object in half will divide the mass & volume by the same amount. Also, the density of a substance remains the same no matter what size it is.
Tony ran at a constant speed of 10 m/s for a total of 60 seconds. How far did he run?
Answers
According to the speed formula, distance that Tony ran at a constant speed of 10 m/s for a total of 60 seconds is 600 meters.
What is speed?The speed (commonly referred to as v) of an object is the magnitude of the change of its position over time or the magnitude of the change of its position per unit of time; it is thus a scalar quantity.The average speed of an object in an interval of time is the distance traveled by the object divided by the duration of the interval; the instantaneous speed is the limit of the average speed as the duration of the time interval approaches zero. Speed is not the same as velocity.
Speed has the dimensions of distance divided by time. The SI unit of speed is the metre per second (m/s), but the most common unit of speed in everyday usage is the kilometre per hour (km/h) or, in the US and the UK, miles per hour (mph). For air and marine travel, the knot is commonly used.
Learn more about speed,here:
https://brainly.com/question/7359669
#SPJ6
The SI base unit for mass is the gram. TRUE FALSE
Answers
Explanation:
Hey there!!
Actually gram is also a measurement unit used in CGS system of measurement.
But in SI system, there is use og kilogram in measuring mass.
{There is use of gram as a base}.
So, the answer is True.
Hope it helps..
