A mover uses a ramp to load a crate of nails onto a truck. The crate, which must be lifted 1.5 m from the street to the bed of the truck, is pushed along the length of the ramp. If the ramp is 4.5 m long and friction between the ramp and crate can be ignored, what is the mechanical advantage of the ramp?
Answer: M.A = 3
Explanation:
A ramp is an example of an inclined plain. Where the
Height H = 1.5 m
Length L = 4.5 m
Mechanical advantage of a machine is the ratio of the load to effort. While mechanical advantage M.A of an inclined plain is the ratio of the length of the plain to the height of the plain.
M.A = L/H
Substitute the values of L and H into the formula
M.A = 4.5/1.5 = 3
The mechanical advantage of the ramp is 3
How is work related to force and displacement?
Answer:
Displacement is the distance and direction an object is moved. Force and work are directly proportional to each other, while force and displacement are indirectly propotional. The equation showing the relationship is W= Fd. OR Work is a scalar. The rate at which work is done or at which energy is transferred. Work is equal to the force parallel to the displacement.
Explanation:
Work is related to force and displacement as the work is the product of the displacement and the force.
What is work done?The total amount of energy transferred when a force is applied to move an object through some distance
The work done is the multiplication of applied force with displacement.
The SI unit of work done by an object is Joules.
IJ is the work done when a force of 1 N displaces an object by 1 m .
work is the product of displacement and force.
Work Done = Force * Displacement
For example, let us suppose a force of 100 N is used to displace an object by a displacement of 50 m then the work done on the object can be calculated by the above-mentioned formula
work done = 100 N ×50 m
=5000 N m
Thus, we can say the work done on an object depend on the force as well as the displacement, as the work is the product of the force and the displacement
Learn more about work from here
brainly.com/question/13662169
#SPJ2
Electron are _____ charged particles
Answer:
negatively
Explanation:
hope this can help u :3
Answer:
negatively
Explanation:
Light travels approximately 982,080,000 ft/s, and one year has approximately 32,000,000 seconds. A light year is the distance light travels in one year.
Calculate the distance of one light year in feet.
Answer: 3.142656 × 10^16 feet
Explanation: Given that the
Speed = 982,080,000 ft/s, and
Time = 32,000,000 seconds
The formula for speed is:
Speed = distance/ time
Make distance the subject of formula
Since the time is second in one year and speed is ft/s, substitute both into the formula
Distance = speed × time
distance = 982,080,000 × 32,000,000
Distance = 3.142656 × 10^16 feet.
The distance of one light year in feet is 3.142656 × 10^16
Remembering the Battle of Bunker Hill what did general Harry and his troops do
do you believe there is an end to the universe? Explain your answer
A washing machine heats 10kg of water in each wash cycle. How much energy is saved by washing at 30'c instead of 50'c if the starting temperature of the cold water is 16'c? The specific heat capacity of water is 4200 J/Kg'c
The two equations you can use is in the picture.
8.4 × 10⁵ Joules of heat energy can be saved assuming that there is no heat exchange between the washing machine and the environment.
What is Heat energy?Heat energy is the result of movement of tiny particles called as atoms, molecules, or ions in solids, liquids and gas substances. Heat energy can be transferred from one object to another object.
Let m denote the mass of water and the specific heat capacity of water. The energy required to raise the temperature of that much water by would be:
Q = m × c × ΔT
Washing at 30°C would require a temperature change of
ΔT = 30°C - 16°C = 14°C
Washing at 50°C would require a temperature change of
ΔT = 50°C - 16°C = 34°C
In both situations, c = 4.2 × 10³J.kg/ °C while m = 10kg.
Calculate the energy required in either of the situations as:
Washing at 30°C:
Q(30°C) = c × m × ΔT
Q = 4.2 × 10³J.kg/ °C × 10kg × 14°C
Q = 588000 Joules
Washing at 50°C :
Q (50°C) = c × m × ΔT
Q = 4.2 × 10³J.kg/ °C × 10kg × 34°C
Q = 1428000 Joules
1428000 Joules - 588000 Joules = 8.4 × 10⁵ Joules
Learn more about Specific heat capacity here:
https://brainly.com/question/29766819
#SPJ2
how has E=MC2 helped us with our understanding of how stars like our Sun create energy?
Answer: please find the answer in the explanation
Explanation:
E = MC^2
Where
E = energy
M = mass
C = speed of light.
This equation is an eyes opener about the relationship between matter and energy. Its explanation about how matter can become energy and how energy can also give information about matter.
It helps us to understand the fusion and fission of both sun and star particles which eventually give us the result of the magnitude of energy they emit or radiate.
A wave has a frequency of 1000 Hz and a wavelength of 0.33 m. What is the
speed of the wave? Use the equation v=fxa.
O
O
O
A. 330 m/s
B. 590 m/s
C. 0.017 m/s
O
D. 0.0030 m/s
SUBMIT
A
Explanation:
V= f×a
V= 1000Hz ×0.33m
V= 330m/s
Acceleration can be defined as the rate at which velocity
Answer here
Answer:
Acceleration can be defined as the rate at which velocity increases per second.
Assuming that the acceleration unit is
m/s^2
Electric circuit questions,,, plz help me
if you crash your car how could you decrease the damage to you or the car using the concept of impulse
Explanation:
Crumple zones are sections in cars that are designed to crumple up when the car encounters a collision. Crumple zones minimize the effect of the force in an automobile collision in two ways. By crumpling, the car is less likely to rebound upon impact, thus minimizing the momentum change and the impulse.
WHAT IS CHANGE OF STATE
Answer:
a change from one state (solid or liquid or gas) to another without a change in chemical composition
Explanation:
Explanation:
From Solid to. Liquid to Gas A change of state is the change of a substance from one physical form to another. All changes of state are physical changes. The particles have different amounts of energy when the substance is in different states.
Which of the following is an example of a chemical change
a car travels 60 km in 2 hours 84 km the next 1 hour and then 68 km in 8.9 hours before reaching its destination what was the cars average speed in km / h
Answer:
17.8 km/hr
Explanation:
Average speed = distance / time
The total distance traveled is 60 km + 84 km + 68 km = 212 km.
The total time is 2 hr + 1 hr + 8.9 hr = 11.9 hr.
The average speed is 212 km / 11.9 hr = 17.8 km/hr
Which of the following situations would produce and average velocity of zero
The shape of an apple is considered what
the shape of an apple is considered a physical property
Two waves with amplitudes of 52 units and 98 units come together. Their amplitude, which is measured at a specific point and time, is 46 units. What wave behavior explains this value? A. destructive interference B. constructive interference C. refraction D. diffraction E. partial transmission
Answer: A
destructive interference
Explanation: Interference involves coming together of two waves of the same type. E.g sound waves, water waves e.t.c
Whenever two waves of different amplitude interferes with one another and there is increase in amplitude, this is known as constructive interference.
But whenever there is decrease in amplitude as a result of interference of the two waves, this is known as destructive interference.
If Two waves with amplitudes of 52 units and 98 units come together. Their amplitude, which is measured at a specific point and time, is 46 units. The wave behavior that explains this value is destructive interference because of decrease in the units of amplitude.
Answer:
destructive interference
Explanation: Plato user
Write down the equation that links energy transferred, charge flow, and
potential difference.
Answer:
The description of the given scenario is described in the explanation segment below.
Explanation:
As a charge passes through some kind of potential gap, the electrical task is undertaken as well as energy will be transferred. The Potential difference seems to be an amount of work performed per unit charge and is denoted by "V" as well as a charge is denoted by "Q".The energy transferred could be determined by using the following equation or formula:
⇒ Energy transferred = charge × potential difference
The equation that links energy transferred, charge flow, and potential difference (voltage) is: [tex]E = qV[/tex]
In Science, when a potential difference (voltage) is applied on an object, it gains some potential energy, which is then converted to kinetic energy.
The kinetic energy possessed by the object is responsible for the movement of electrons from one point to another in an electric field.
Hence, the quantity of energy in an electric circuit is directly proportional to the charge and potential difference (voltage) applied on the object.
Mathematically, the energy transferred in an electric field is given by the formula:
[tex]E = qV[/tex]
Where:
E is the energy transferred.q is the charge.V is the potential difference.Read more: https://brainly.com/question/23153766
When a shot putter exerts a force of 140 N on a 7.5 kg shot, what its is acceleration?
18.67
Explanation:
acceleration=Force÷mass
acceleration=140÷7.5
acceleration=18.67
Answer:
Explanation:
Force,F = mass,m × acceleration due to gravity,g
⇒g=F/m
⇒g=140/7.5
⇒g=18.67 N/kg
1/25 force of gravity in distance
Answer: 25
Explanation:
Match the type of metamorphism to its best definition.
Impact
metamorphism
?
The process in which a
rock changes as a result
of heat generated from
magma.
Dynamic
metamorphism
?
The process in which a
rock changes due to
pressure directed on it.
Contact
metamorphism
?
The process in which a
rock changes because of
extreme heat and pressure
caused by a meteorite
collision with Earth.
Regional
metamorphism
?
The process in which
buried rocks in a large
area are changed by heat,
pressure, and fluids.
Answer:
See Explanation.
Explanation:
Impact metamorphism:
The process in which a rock changes because of extreme heat and pressure caused by a meteorite collision with Earth.
Regional metamorphism:
The process in which buried rocks in a large area are changed by heat, pressure, and fluids.
Contact metamorphism:
The process in which a rock changes as a result
of heat generated from magma.
Dynamic metamorphism :
The process in which a rock changes due to
pressure directed on it.
The typing of metamorphism to its best definition should be explained below.
Matching with the best definition:
Impact metamorphism: The process where a rock changes due to extreme heat and pressure caused by a meteorite collision with Earth.
Regional metamorphism: The process where it should be buried rocks in a large area that should be changed by heat, pressure, and fluids.
Contact metamorphism: The process where a rock changes as a result
of heat generated from magma.
Dynamic metamorphism : The process where a rock changes due to
pressure directed on it.
Learn more about pressure here: https://brainly.com/question/20772787
Which object has the least amount of kinetic energy?
Spinning top
Ball rolling water falling out of cup
Roller coaster
Answer:
Not sure about the answer but I think its roller coaster
Explanation:
Answer:
golf ball
Explanation:
it is correct on edge
How does the value of the electrostatic force vary with the value (how many) of the charges?
Answer:
Electrostatic force is directly proportional to the amount of charge on each body under consideration.
Electrostatic force increases with increase in charge.
Electrostatic force decreases with decrease in charge.
Explanation:
Electrostatic force is the force between 2 charges which can be explained by the Coulomb's Law:
F= K (q₁)(q₂)/r²
Where
F= Electrostatic Force
K = Constant of Proportionality
(q₁) and (q₂) = Amount of charge on each body
r = Distance between two bodies carrying charge
If the value of (q₁) or (q₂) is increased considering the other factors remain constant, the value of F will also increase.
And vice versa.
On the moon, what would be the force of gravity acting on an object that has a mass of 7 kg?
Answer: 7 kg
Explanation:
ANSWER ASAP AND WILL GIVE BRAINLIEST AND POINTS
Which line indicates the orbit of Mars?
Answer choices:
B
D
A
C
Answer:
D
Explanation:
Mars is the planet between Earth and Jupiter, or the 4th planet from the Sun.
Answer:
D is the correct answer
These waves are often used as a means to transfer digital information such as a text message or website.
A)Infrared
B)Ultraviolet
C)Radio
D)Visible Light
Answer:The answer is C
Explanation:
The waves are often used as a means to transfer digital information such as a text message or website is radio waves. The correct option is C.
What is digital information?Digital information generally consists of data that is created or prepared for electronic systems and devices such as computers, screens, calculators, communication devices. These information are stored by cloud.
The wave used for the same purpose is radio waves which has the high frequency range.
Thus, the correct option is C.
Learn more about digital information.
https://brainly.com/question/4507942
#SPJ5
Mechanical energy is..
A. Found in machinery only
B. usually measured at the atomic level
C. the sum of the chemical and thermal energy of an object
D. the sum of the kinetic and potential energy of an object
Answer:
D
Explanation:
Mechanical energy is all about movement
Also kinetic and potential energy are mechanical
What is the momentum of a bowling ball with a mass of 8.9 and a speed of 6.0 m/s
Answer:
53 kg m/s
Explanation:
Momentum = mass × velocity
p = mv
p = (8.9 kg) (6.0 m/s)
p = 53.4 kg m/s
Rounded to 2 significant figures, the momentum is 53 kg m/s.
Why can a liquid take the shape of the bottom of its container?
A: The particles of a liquid can vibrate within their fixed locations
B: The particles of a liquid can break free from one another and spread out
C: The particles of a liquid can flow around one another to a new location
Answer:
c
Explanation:
bc the molecules are not so tightly packed it can slide past one another or flow to a new location.
