Answer:
This water has a level acceptable, 0.1359ppm and 135.9ppb.
Explanation:
1.40g of Cl⁻ are:
1.40g Cl⁻ × (1000mg / 1g) = 1400mg Cl⁻
In 1.03x10⁴L:
1400mg / 1.03x10⁴L = 0.1359mg/L.
As the upper limit of Cl⁻ in water is 250mg/L, this water has a level acceptable
ppm are the ratio between mg of solute and liters of solution, that means the tank contains 0.1359mg/L = 0.1359ppm
ppb, parts per billion are 1000 times ppm, thus, parts per billion of the storage tank are:
0.1359ppm × 1000 = 135.9ppb
Suppose a reaction mixture, when diluted with water, afforded 300 mL of an aqueous solution of 30 g of the reaction product malononitrile [CH2(CN)2], which is to be isolated by extraction with ether. The solubility of malononitrile in ether at room temperature is 20.0 g/100 mL, and in water is 13.3 g/100 mL. What weight of malononitrile would be recovered by extraction with (a) three 100-mL portions of ether and (b) one 300-mL portion of ether
The given question is not complete, the complete question is:
Suppose a reaction mixture, when diluted with water, afforded 300 mL of an aqueous solution of 30 g of the reaction product malononitrile [CH2(CN)2], which is to be isolated by extraction with ether. The solubility of malononitrile in ether at room temperature is 20.0 g/100 mL, and in water is 13.3 g/100mL. The ratio of these quantities is equal to the partition coefficient, k, which equals What weight of malononitrile would be recovered by extraction of (a) three 100-mL portions of ether and (b) one 300-mL portion of ether? SHOW WORK (Can be written in pen and attached to report). Suggestion: For each extraction, let x equal the weight extracted into the ether layer. In part (a), for the first of the three extractions, the concentration of malononitrile in the ether layer is x/100 and in the water layer is (30-x)/100.
Answer:
The correct answer is 10 grams and 18 grams.
Explanation:
Based on the given question, 20 gram per 100 ml is the solubility of malononitrile in ether, and 13.3 gram per 100 ml is the solubility of malononitrile in water.
Thus, the ration of the solubility is,
Solubility in water/solubility in ether = 20/13.3 = 1.50
a) Let w be the weight of malononitrile extracted into water in every extraction. Then the concentration of the ether layer will be w/100. The concentration in the water layer will be 30-w/300. Now the ratio will be,
Ratio = w/100 / (30-w)/300
1.50 = w/100 * 300 (30-w)
w = 10
Hence, the weight of malononitrile recovered by extraction is 10 grams.
b) The concentration in the ether layer will be w/300. The concentration in the water layer will be (30-w) / 300. Now the ratio will be,
Ratio = w/300 / (30-w) / 300
1.50 = w/300 * 300 (30-w)
w = 18
Hence, 18 grams is the weight of malononitrile recovered by extraction.
You add 5.7 g of iron to 25.20ml of water and observe that the volume of the iron and water together is 25.92ml calculate thw density of the iron
Answer:
7.92gml-1
Explanation:
water=25.20ml
water+iron=25.92ml
iron=5.7g
P=mass/volume (formula of density)
mass=5.7g
volume=25.92-25.20
=0.72ml
p=5.7/0.72
=7.92gml-1
Given:
Initial volume of water = 25.20mL
Volume of water after iron is added = 25.92mL
Mass of iron = 5.7g
So, the volume of iron = 25.92mL - 25.20mL = 0.72mL
∴ Density of iron will be
Density = Mass/Volume
Density = 5.7g / 0.72mL
Density = 7.91 g/mL
What is density in short answer?
The density of a substance is the relationship between its mass and how much space it takes up. Density equals the mass of the substance divided by its volume, D = m/v.
What is the SI unit of density?Though SI unit of density is kg/m³ solids, g/ml for liquids and g/L for gases.
Learn more about Density here
https://brainly.com/question/6838128
#SPJ2
2 Points
What is the voltage of an electrolytic cell with copper and magnesium
electrodes?
A. -2.71 v
B. 2.71 v
C. 2.03 V
D. -2.03 V
The voltage of an electrolytic cell with copper and magnesium electrodes is 2.71 v. Therefore, option B is correct.
What is an electrolytic cell ?The electrolytic cell is a type of cell that performs a redox reaction while using electrical energy. When electrical energy is applied, a redox reaction occurs in molten NaCl. It is therefore an electrolytic cell.
An electrolyte, two electrodes, and an electrolytic cell make up an electrolytic cell (a cathode and an anode). The electrolyte is typically a mixture of ions that have been dissolved in water or another solvent. Electrolytes can also be molten salts, like sodium chloride.
The standard reduction potential, E° of the metals are as below:
Mg²⁺ + 2e⁻ ⇌ Mg; E° = -2.372
Cu²⁺ + 2e⁻ ⇌ Cu; E° = +0.337
Therefore, magnesium has the the lower E°, it will serve as the anode in the electrolytic cell while copper will serve as the cathode.
At the anode; Mg ⇌ Mg²⁺ + 2e⁻, E° = -2.372
At the cathode; Cu²⁺ + 2e⁻ ⇌ Cu, E° = +0.337
EMF of the cell = E° cathode - E° anode
= 0.337 - (-2.372) = 2.71 V
Therefore, EMF of the cell is 2.71 V
Thus, option B is correct.
To learn more about the electrolytic cell, follow the link;
https://brainly.com/question/4030224
#SPJ1
I WILL GIVE BRAINLIEST
• Briefly discuss the cause of errors in the measurements
Which of the following bases is the WEAKEST? The base is followed by its Kb value. Group of answer choices HOCH2CH2NH2, 3.2 × 10-5 (CH3CH2)3N, 5.2 × 10-4 NH3, 1.76 × 10-5 C5H5N, 1.7 × 10-9 Since these are all weak bases, they have the same strength.
Answer:
C₅H₅N being the weakest base
Explanation:
A weak base (B) is defined as a chemical compound that, in reaction with water, produce a small quantity of BH⁺
The general reaction is:
B + H₂O ⇄ BH⁺ + OH⁻ Where Kb is defined as:
Kb = [BH⁺] [OH⁻] / [B]
That means the smallest Kb is the weakest base because is producing the smallest quantity of BH⁺.
In the problem, the smallest Kb is C₅H₅N being the weakest base.
Liquid hexane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 4.3 g of hexane is mixed with 7.14 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
We can produce 6.20 grams of CO2
Explanation:
Step 1: Data given
Mass of hexane = 4.3 grams
Molar mass of hexane = 86.18 g/mol
Mass of oxygen = 7.14 grams
Molar mass of oxygen = 32.0 g/mol
Step 2: The balanced equation
2C6H14 + 19O2 → 12CO2 + 14H2O
Step 3: Calculate moles
Moles = mass / molar mass
Moles hexane = 4.3 grams / 86.18 g/mol
Moles hexane = 0.0499 moles
Moles oxygen = 7.14 grams / 32.0 g/mol
Moles oxygen = 0.2231 moles
Step 4: Calculate the limiting reactant
For 2 moles hexane we need 19 moles O2 to produce 12 moles CO2 and 14 moles H2O
Oxygen is the limiting reactant. It will completely be consumed ( 0.2231 moles). Hexane is in excess. There will react 2/19 * 0.2231 = 0.02348 moles
There will be porduced 12/19 * 0.2231 = 0.1409 moles CO2
Step 5: Calculate mass CO2
Mass CO2 = moles CO2 * molar mass CO2
Mass CO2 = 0.1409 moles * 44.01 g/mol
Mass CO2 = 6.20 grams
We can produce 6.20 grams of CO2
Empirical formula for compound of 2.17 mol N and 4.35 mol O
Answer:
Explanation:
ratio of moles of N and O in molecule =
N / O = 2.17 / 4.35
1/2
empirical formula = NO₂
When you look at an ant up close, using a convex lens, what do you see?
Answer:
You would be able to see the ants clearly with the unique body parts.
Explanation:
Convex lens is also known as Converging lens. It helps in converging rays of light to become a principal focus which is usually very clear and visible to the eyes. The converging lens when used to view the ant makes the ant appear very visible and the individual is able to see all the unique body parts of the ant. This type of lens is used in individuals who are longsighted.
9. Predict the major products formed when: (a) Toluene is sulfonated. (c) Nitrobenzene is brominated. (b) Benzoic acid is nitrated. (d) Isopropylbenzene reacts with acetyl chloride and AlCl3. If the major products would be a mixture of ortho and para isomers, you should so state.
Answer:
a) ortho-para isomers predominates
b) 3-nitrobenzoic acid ( meta isomer predominates)
c) 3-bromo nitrobenzene ( meta isomer predominates)
d) the ortho- para isomers predominates
Explanation:
a) Toluene contains -CH3 which is an ortho- para- director hence the major product of the sulphonation of toluene should be the ortho- para isomers.
b) The major product of the nitration of benzoic acid is 3-nitrobenzoic acid. This is an electrophilic substitution in which the meta isomer predominates.
c) The meta isomer predominates giving 3-bromo nitrobenzene as the major product.
d) The isopropyl group is an ortho- para director hence the ortho- para isomers predominates .
An excess of AgNO3 reacts with 185.5 mL of an AlCl3 solution to give 0.325 g of AgCl. What is the concentration, in moles per liter, of the AlCl3 solution? Must show your work on scratch paper to receive credit. AlCl3(aq) + 3 AgNO3(aq) → 3 AgCl(s) + Al(NO3)3(aq)
Answer:
4.07x10⁻³M AlCl₃.
Explanation:
Based on the reaction:
AlCl₃(aq) + 3 AgNO₃(aq) → 3 AgCl(s) + Al(NO₃)₃(aq)
That means 1 mole of AlCl₃ reacts with 3 moles of AgNO₃ to produce 3 moles of AgCl.
As 0.325g of AgCl are produced. Moles of AgCl are (Molar mass AgCl: 143.32g/mol):
0.325g AgCl ₓ ( 1 mol / 143.32g) = 2.27x10⁻³ moles of AgCl
As 3 moles of AgCl are produced from 1 mole of AlCl₃, moles of AlCl₃ that produce 2.27x10⁻³ moles of AgCl are:
2.27x10⁻³ moles of AgCl ₓ (1 mole AlCl₃ / 3 moles AgCl) =
7.56x10⁻⁴ moles AlCl₃
As volume of the AlCl₃ solution that reacts is 185.5mL = 0.1855L, molar concentration of the solution is:
7.56x10⁻⁴ moles AlCl₃ / 0.1855L =
4.07x10⁻³M AlCl₃Calculate the percentage of the void space out of the total volume occupied by 1 mole of water molecules. The density of water is assumed to be 1.0 g/mL that is 1.0 g/cm3. The molar mass of water is 18.0 g/mol. The atomic radius of hydrogen is 37 pm and of oxygen is 73 pm. The formula for the volume of a sphere is 4/3(r3
Answer:
The percentage of the void space out of the total volume occupied is 93.11%
Explanation:
A mole of water contains 2 atoms of hydrogen and 1 atom of oxygen.
To calculate the volume of a mole of water, we calculate 2 times the volume of the hydrogen atom and 1 times the volume of the oxygen atom
Let's calculate this one after the other.
For the hydrogen, formula for the volume will be
[tex]V_{hydrogen[/tex] = 2 × 4/3 × π × [tex]r_{H}^{3}[/tex]
where [tex]r_{H}^{3}[/tex] = 37 pm which is read as 37 picometer (1 picometer = 10^-12 m) = 37 × [tex]10^{-12}[/tex] meters
Volume of the hydrogen = 8/3 × (37 × 10^-12)^3 = 4.05 * 10^-31
we multiply this by the avogadro's number = 6.02 * 10^23
= 4.05 * 10^-31 * 6.02 * 10^23 = 2.6 * 10^-8 m^3
We do same for thr oxygen, but this time we do not multiply the volume of the oxygen by 2 as we have only one atom of oxygen
Volume of oxygen = 4/3 * π * (73 * 10^-12) ^3 * avogadro's number = 9.81 * 10^-7 m^3
adding both volumes together, we have 1.24 * 10^-6 m^3 or simply 1.24 ml ( 0.01 m = 1 ml)
Dividing the molar mass of one mole of water by its density, we can get the volume of 1 mole of water
= (18g/mol)/(1 g/ml) = 18 ml/mol
Now we proceed to calculate the volume of void = Total volume - volume of molecule = 18 - 1.24 = 16.76 ml
Now, the percentage of void = volume of void/total volume * 100%
= 16.76/18 * 100% = 93.11%
Balance the following chemical equation:
NH4NO3
N20+
H2O
Answer:
NH4NO3 = N2O + 2(H2O)
Explanation:
there are 2 N, 4 H, 3 O
Answer:
NH4NO3=N2O+2H2O
Explanation:
N-2,O-3,H-4
For the following reaction, draw the major organic product and select the correct IUPAC name for the organic reactant. If there is more than one major product, both may be drawn.
When drawing hydrogen atoms on a carbon atom, either include all hydrogen atoms or none on that carbon atom, or your structure may be incorrect.
Select the correct IUPAC name for the organic reactant:
a) 2-methylbutene
b) 2-methyl-1-butene
c) 3-methyl-3-butened) 3-methylbutene
Answer:
The correct IUPAC name for the organic reactant is :
d) 3-methylbutene
Explanation:
Firstly the missing diagram is attached in the diagram below.
The objective of this question is to draw the major organic product and select the correct IUPAC name for the organic reactant. If there is more than one major product, both may be drawn.
From the image attached below; we would see the reaction that occurs between the alkene and the HBr (hydrobromic acid). What really occur in the reaction is that; in the presence of HBr with an alkene compound a secondary 2° carbocation is usually formed. This secondary 2° carbocation formed is usually unstable, so what we called an hydride shift occurs (Markovnikov's product) here to form a stable tertiary 3° carbocation.
The correct IUPAC name for the organic reactant is : 3-methylbutene
A quantity of 2.00 × 102 mL of 0.662 M HCl is mixed with 2.00 × 102 mL of 0.331 M Ba(OH)2 in a constant-pressure calorimeter of negligible heat capacity. The initial temperature of the HCl and Ba(OH)2 solutions is the same at 22.00°C. For the process below, the heat of neutralization is −56.2 kJ/mol. What is the final temperature of the mixed solutions? H+(aq) + OH−(aq) → H2O(l)
Answer:
Final temperature of the solution = 26.43°C
Explanation:
Concentration of HCl = 0.662 M, Volume = 200 mL= 0.200 L
Concentration of Ba(OH)₂ = 0.331 M, Volume = 200 mL = 0.200 L
Initial temperature of solution = 22.00°C
Specific Heat capacity of water = 4.184 J/g°C
Heat of neutralization = -56.3 KJ/mol of H₂O produced.
The full calculations is found in the attachment below
How many moles of solute are contained in the following solution: 15.25 mL of a 2.10 M CaCl₂
Answer:
0.032moles
Explanation:
2.10moles in 1000ml what about 15.25ml
(15.25×2.10)÷1000
0.032moles
Consider each pair of compounds listed below and determine whether a fractional distillation would be necessary to separate them or if a simple distillation would be sufficient.
a. Ethyl acetate and hexane
b. Diethyl Ether and 1-butanol
c. Bromobenzene and 1,2-dibromobenzene
How many moles of h2 can be formed if a 3.25g sample of Mg reacts with excess HCl
Answer:
0.134 moles of H₂ can be formed if a 3.25g sample of Mg reacts with excess HCl
Explanation:
The balanced reaction is:
Mg + 2 HCl → MgCl₂ + H₂
By stoichiometry of the reaction (that is, the relationship between the amount of reagents and products in a chemical reaction), the following amounts of moles react:
Mg: 1 moleHCl: 2 molesMgCl₂: 1 moleH₂: 1 moleBeing:
Mg: 24. 31 g/moleH: 1 g/moleCl: 35.45 g/molethe molar mass of the compounds participating in the reaction is:
Mg: 24.31 g/moleHCl: 1 g/mole + 35.45 g/mole= 36.45 g/moleMgCl₂: 24.31 g/mole + 2*35.45 g/mole= 95.21 g/moleH₂: 2*1 g/mole= 2 g/moleThen, by stoichiometry of the reaction, the following quantities of mass participate in the reaction:
Mg: 1 mole* 24.31 g/mole= 24.31 gHCl: 2 moles* 36.45 g/mole= 72.9 gMgCl₂: 1 mole* 95.21 g/mole= 95.21 gH₂: 1 mole* 2 g/mole= 2 gThen you can apply the following rule of three: if by stoichiometry 24.31 grams of Mg form 1 mole of H₂, 3.25 grams of Mg how many moles of H₂ will they form?
[tex]moles of H_{2} =\frac{3.25 grams of Mg*1 mole of H_{2} }{24.31 grams of Mg}[/tex]
moles of H₂= 0.134
0.134 moles of H₂ can be formed if a 3.25g sample of Mg reacts with excess HCl
0.134 moles of H₂ are formed by the reaction of 3.25 g of Mg with excess HCl.
Let's consider the balanced equation between Mg and HCl.
Mg + 2 HCl ⇒ MgCl₂ + H₂
The molar mass of Mg is 24.3 g/mol. The moles corresponding to 3.25 g of Mg are:
[tex]3.25 g \times \frac{1mol}{24.3g} = 0.134 mol[/tex]
The molar ratio of Mg to H₂ is 1:1. The moles of H₂ formed by 0.134 moles of Mg are:
[tex]0.134 mol Mg \times \frac{1molH_2}{1molMg} = 0.134molH_2[/tex]
0.134 moles of H₂ are formed by the reaction of 3.25 g of Mg with excess HCl.
Learn more: https://brainly.com/question/9743981
3. Crystalline structural unit of barium metal is a body-centered cubic cell. The edge length of the unit cell is 5.02x10-8 cm. The density of the metal is 5.30 g/cm3. Assume that 68% of the unit cell is occupied by Ba atoms. The molar mass of barium is 137.3 g/mol. Using this information, calculate Avogadro’s number. Show your calculation procedure that allows you to derive Avogadro’s number. Your answer must show six digits after the decimal point (i.e., 6.pppx1023) that is not necessarily the same as the known value. By showing your calculation-result down to six digits after the decimal point, you showcase that you did calculate the number, instead of simply adopting the known Avogadro’s number available in open resources.
Answer:
The Avogadro's number is [tex]N_A = 6.02289 *10^{23}[/tex]
Explanation:
From the question we are told that
The edge length is [tex]L = 5.02 * 10^{-8} \ cm= \frac{5.02 * 10^{-8} }{100} = 5.02 * 10^{-10}[/tex]
The density of the metal is [tex]\rho = 5.30\ g/cm^3 = 5.30 * \frac{g}{cm^3} * \frac{1*10^6}{1*10^3} = 5.30 *10^3kg/m^3[/tex]
The molar mass of Ba is [tex]Z = 137.3 \ g/mol = \frac{137.3}{1000} = 0.1373 \ kg / mol[/tex]
Generally the volume of a unit cell is
[tex]V = L^3[/tex]
substituting value
[tex]V = [5.02 *10^{-10}]^3[/tex]
[tex]V = 1.265*10^{-28}\ m^3[/tex]
From the question we are told that 68% of the unit cell is occupied by Ba atoms and that the structure is a metal which implies that the crystalline structure will be (BCC),
The volume of barium atom is
[tex]V_a = \frac{V}{2} * 0.68[/tex]
substituting value
[tex]V_a = \frac{ 1.265*10^{-28}}{2} * 0.68[/tex]
[tex]V_a = 4.301 *10^{-29} \ m^3[/tex]
The Molar mass of barium is mathematically represented as
[tex]Z = N_A V_a * \rho[/tex]
Where [tex]N_A[/tex] is the Avogadro's number
So
[tex]N_A = \frac{ Z}{ V_a * \rho}[/tex]
substituting value
[tex]N_A = \frac{ 0.1373}{ 4.301*10^{-29} * 5.3*10^{3}}[/tex]
[tex]N_A = 6.02289 *10^{23}[/tex]
uses of sodium chloride in daily life
Answer:
sodium chloride can be used as salt
extraction sodium metal by electrolysis
a common chemical in laboratory experiments
Answer:
sodium chloride can be used as preservatives,
in preserving foods.
How could the government enforce ethical standards of scientific
experiments?
A. The government could encourage scientists to make up their own
minds about ethics.
B. The government could take away research funds if ethical
standards are not met.
C. The government could let scientists monitor each other to
encourage ethical behavior.
D. The government could encourage the public to take a stand
against unethical scientists.
Answer: D. The Government could take away research funds if ethical standards are not met
The government enforce ethical standards of scientific experiments
B. The government could take away research funds if ethical
standards are not met.
Ethical standards are a set of principles established by the founders of the organization to communicate its underlying moral values. This code provides a framework that can be used as a reference for decision making processes.
How does the government control scientific research?Politicians and bureaucrats control scientific research and research outcomes by selectively funding projects that look for potential disasters, ideally global disasters.
What are the 8 ethical standards?This analysis focuses on whether and how the statements in these eight codes specify core moral norms (Autonomy, Beneficence, Non-Maleficence, and Justice), core behavioral norms (Veracity, Privacy, Confidentiality, and Fidelity), and other norms that are empirically derived from the code statements.
To learn more about ethical standards, refer
https://brainly.com/question/13205036
#SPJ2
differentiate between sol,aerosol and solid soluti
Answer:
Sol is a colloidal suspension with solid particles in a liquid. Foam is formed when many gas particles are trapped in a liquid or solid. Aerosol contains small particles of liquid or solid dispersed in a gas. While solid solution contain solid as solute in either solid, liquid or gas.
During chemical reaction 7.55gKI and 9.06g were allowed to react. How many grams of excess reagent are left over after the reaction is complete. Reaction: Pb(NO3)2(s) + 2KCI(s) > 2KNO3(s) + PbI(s)
Answer: 7.45 g of [tex]Pb(NO_3)_2[/tex] excess reagent are left over after the reaction is complete.
Explanation:
To calculate the number of moles, we use the equation:
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex]
a) [tex]{\text{Number of moles of} KI}=\frac{7.55g}{166g/mol}=0.045moles[/tex]
b) [tex]{\text{Number of moles of} Pb(NO_3)_2}=\frac{9.06g}{331.2g/mol}=0.027moles[/tex]
The balanced chemical reaction is :
[tex]Pb(NO_3)_2(s)+2KI(s)\rightarrow 2KNO_3(s)+PbI(s)[/tex]
According to stoichiometry :
2 moles of [tex]KI[/tex] require = 1 mole of [tex]Pb(NO_3)_2[/tex]
Thus 0.045 moles of [tex]KI[/tex] will require=[tex]\frac{1}{2}\times 0.045=0.0225moles[/tex] of [tex]Pb(NO_3)_2[/tex]
Thus [tex]KI[/tex] is the limiting reagent as it limits the formation of product and [tex]Pb(NO_3)_2[/tex] is the excess reagent as (0.045-0.0225) = 0.0225 moles are left
Mass of [tex]Pb(NO_3)_2=moles\times {\text {Molar mass}}=0.0225moles\times 331.2g/mol=7.45g[/tex]
Thus 7.45 g of [tex]Pb(NO_3)_2[/tex] of excess reagent are left over after the reaction is complete.
Which of the following best describes isotopes?
An element with the same number of neutrons, but a different number of protons.
An element with the same number of protons, but a different number of electrons.
An element with the same number of electrons, but a different number of neutrons
An element with the same number of protons, but a different number of neutrons
Answer: An element with the same number of protons, but a different number of neutrons
Explanation:
The # of protons in an atom is what determines what atom it is (hydrogen has 1 proton, helium has 2 protons, etc ...). You cannot change the number of protons in an atom without changing what element the atom is.
The number of electrons in atoms varies greatly because electrons are constantly gained, lost, and shared during chemical reactions.
An isotope is a variation of the same element (so they must have the same # of protons) that have different masses (and therefore a different number of neutrons).
The answer is the fourth choice, "An element with the same number of protons, but a different number of neutrons"
The isotopes refer to an element that consists of a similar number of protons but have a distinct no of neutrons.
What are isotopes:It is considered to be the members of the family with respect to the elements that consist of a similar number of protons but have a distinct no of neutrons. The no of protons in the nucleus measured the atomic number of elements based on the periodic table.
Therefore, the fourth option is correct.
Learn more about isotopes here: https://brainly.com/question/22318349
Heat is added to a 1.0-kg block of ice at OC. Determine if the process is
endothermic or exothermic. Explain your answer. *
Answer:
endothermic
Explanation:
Heat is added to make the process possible.
When 200g of AgNO3 solution mixes with 150 g of NaI solution, 2.93 g of AgI precipitates, and the temperature of the solution rises by 1.34oC. Assume 350 g of solution and a specific heat capacity of 4.184 J/g•oC. Calculate H for the following: Ag+(aq) + I- (aq) → AgI(s)
Answer:
[tex]\Delta H=1962.3J[/tex]
Explanation:
Hello,
In this case, we can compute the change in the solution enthalpy by using the following formula:
[tex]\Delta H=mC\Delta T[/tex]
Whereas the mass of the solution is 350 g, the specific heat capacity is 4.184 J/g °C and the change in the temperature is 1.34 °C, therefore, we obtain:
[tex]\Delta H=350g*4.184\frac{J}{g\°C} *1.34\°C\\\\\Delta H=1962.3J[/tex]
It is important to notice that the mass is just 350 g that is the reacting amount and by means of the law of the conservation of mass, the total mass will remain constant, for that reason we compute the change in the enthalpy as shown above, which is positive due to the temperature raise.
Best regards.
Consider the following reaction where Kc = 1.29×10-2 at 600 K: COCl2 (g) CO (g) + Cl2 (g) A reaction mixture was found to contain 0.104 moles of COCl2 (g), 4.66×10-2 moles of CO (g), and 3.76×10-2 moles of Cl2 (g), in a 1.00 liter container. Indicate True (T) or False (F) for each of the following:
1. In order to reach equilibrium COCl2(g) must be consumed.
A. True B. False
2. In order to reach equilibrium Kc must increase.
A. True B. False
3. In order to reach equilibrium CO must be consumed.
A. True B. False
4. Qc is greater than Kc.
A. True B. False
5. The reaction is at equilibrium. No further reaction will occur.
A. True B. False
Answer:
1. In order to reach equilibrium COCl₂(g) must be consumed.
B. False
2. In order to reach equilibrium Kc must increase.
B. False .
3. In order to reach equilibrium CO must be consumed.
A. True.
4. Qc is greater than Kc.
A. True
5. The reaction is at equilibrium. No further reaction will occur.
B. False.
Explanation:
Based on the reaction:
COCl₂(g) → CO (g) + Cl₂(g)
And Kc is defined as:
Kc = 1.29x10⁻² = [CO] [Cl₂] / [COCl₂]
Molar concentrations of each species are:
[COCl₂] = 0.104 moles of COCl₂ / 1L = 0.104M
[CO] = 4.66×10⁻² moles of CO / 1L = 4.66×10⁻²M
[Cl₂] = 3.76×10⁻² moles of Cl₂ / 1L = 3.76×10⁻²M
Replacing in Kc formula:
4.66×10⁻²M × 3.76×10⁻²M / 0.104M = 1.68x10⁻²
As the concentrations are not in equilibrium, 1.68x10⁻² is defined as the reaction quotient, Qc.
As Qc > Kc, the reaction will shift to the left producing more COCl₂ and consuming CO and Cl₂. Thus
1. In order to reach equilibrium COCl₂(g) must be consumed.
B. False
2. In order to reach equilibrium Kc must increase.
B. False . Kc is a constant that never change.
3. In order to reach equilibrium CO must be consumed.
A. True.
4. Qc is greater than Kc.
A. True
5. The reaction is at equilibrium. No further reaction will occur.
B. False. The reaction is in equilibrium when Qc = Kc
What would cause a balloon to expand if taken to the top of a mountain?
O A. Increased molecular collision
O B. Increased amount of molecules
O C. Lowered temperature
D. Lowered pressure
Answer:
D. Lowered pressure
Explanation:
As you go to more altitude or height, the atmospheric pressure significantly lowers so the gas molecules are free to expand and take up as room as possible.
This is best explained by Boyle's law where pressure and volume are inversely related, where if one thing goes up another goes down. Here the pressure goes down, so volume increases and ballon expands.
Which of the following is not an example of a mechanical wave?
A. Fans doing "The Wave" at a sporting event.
B. Sound waves coming out of the radio.
C. Water waves at hie beach.
D. Sunshine.
Answer:
Option D
Explanation:
A mechanical wave is a wave of energy that can travel long distances and could go through characteristics of matter such as solids, liquids, and gases. Mechanical waves can also travel through vacuums. A good example of a mechanical wave would be sound, sound is a wave spread through a object and can go through different types of matter. Which is why your answer is option D "sunshine." Light cannot go through a vacuum while sounds, and water can.
Hope this helps.
The mechanical wave example does not include the sunshine
What is mechanical waves ?It is the wave of energy that can travel long distances and considered the characteristics of matter like solids, liquids, and gases. It can also travel via vacuums. The Light cannot go via a vacuum while sounds, and water can go.
Learn more about sound here:https://brainly.com/question/16750970
calculate the moles of 25.2 g Na2S2O8
Answer:
To calculate the moles we must first find the molar mass M
M (Na2S2O8) = (23*2) + (32*2) + (16*8)
= 46 + 64 + 168
= 278g/mol
Molar mass = mass/moles
moles =mass / molar mass
= 25.2/278
= 0.0906mol
Hope this helps.
