0.7 moles of water can be produced when 137.9 grams of HNO3 are consumed.
To calculate the number of moles of water produced when 137.9 grams of HNO3 are consumed, we need to use the molar masses and stoichiometry of the balanced chemical equation.
The balanced equation:
S + 6 HNO3 --> H2SO4 + 6 NO2 + 2 H2O
From the balanced equation, we see that the coefficient of HNO3 is 6, which means that for every 6 moles of HNO3 consumed, 2 moles of water are produced.
The molar mass of HNO3 is:
1 (hydrogen) + 14 (nitrogen) + 48 (3 oxygens) = 63 g/mol.
To find the number of moles of HNO3, we divide the given mass (137.9 g) by the molar mass of HNO3:
137.9 g / 63 g/mol = 2.19 mol (rounded to two decimal places).
Since the mole ratio of HNO3 to water is 6:2, we can multiply the number of moles of HNO3 by the mole ratio to find the moles of water:
2.19 mol × (2 mol H2O / 6 mol HNO3) = 0.73 mol.
Therefore, approximately 0.7 moles of water can be produced when 137.9 grams of HNO3 are consumed.
For such more question on moles of water
https://brainly.com/question/7510125
#SPJ8
URGENT! Please help! Hi, I have to do a titration lab report using the Royal Society of Chemistry online titration lab. Please help me answer the following questions using the observation table I think?
Answer:
I'm sorry, but I cannot see the observations or the data table you mentioned in your question. However, I can still provide you with some general guidance on how to approach the calculations and answer the questions based on the given information.
4. To calculate the concentration of the NaOH solution, you need to know the mass of NaOH used and the volume of the solution. The formula to calculate concentration is:
Concentration (in mol/L) = (Mass of NaOH (in grams) / molar mass of NaOH) / Volume of solution (in L)
Make sure to convert the mass of NaOH to moles by dividing it by the molar mass of NaOH. The molar mass of NaOH is the sum of the atomic masses of sodium (Na), oxygen (O), and hydrogen (H).
5. The balanced equation for the neutralization reaction between NaOH and HCl is:
NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
(aq) represents an aqueous solution, and (l) represents a liquid.
6a. To calculate the average concentration of HCl in the sample from site B, you need to know the volumes and concentrations of the NaOH and HCl solutions used in the titration. Use the formula:
Concentration of HCl (in mol/L) = (Volume of NaOH solution (in L) * Concentration of NaOH (in mol/L)) / Volume of HCl solution (in L)
Multiply the volume of NaOH solution used by its concentration to find the amount of NaOH used. Then, divide this amount by the volume of HCl solution used to find the concentration of HCl.
6b. To determine the pH of the water at site B, you need to know the concentration of HCl from the previous calculation. The pH can be calculated using the formula:
pH = -log10[H+]
Since HCl is a strong acid, it dissociates completely into H+ ions. Therefore, the concentration of H+ ions is equal to the concentration of HCl. Take the negative logarithm (base 10) of the H+ concentration to find the pH.
To check if the water is safe, compare the calculated pH value to the range provided (pH 4.5-7.5). If the pH falls within this range, the water is considered safe for plant and animal reproduction in an aquatic environment.
6c. Use a similar calculation as in 6a to determine the average concentration of HCl in the sample from site C.
6d. Use the concentration of HCl from 6c to calculate the pH using the formula in 6b. Follow the same procedure to check if the water is safe based on the pH range.
7. To find the most current pH value for the Grand River, you can search for the latest data from reliable sources such as environmental agencies, research institutions, or government websites. Compare this pH value to the pH values obtained in the experiment to assess the difference between them.
Remember, without the specific data and observations, the calculations and comparisons provided here are only general guidelines. It's important to use the actual data from your experiment to obtain accurate results and conclusions.
Please mark as Brainliest
A-›B+ C
is known to be zero order in A and to have a rate constant of
5.0 X 10^-2 mol/L • s at 25°C. An experiment was run at 25°C
where [A]o = 1.0 X 10^-3 M.
a. Write the integrated rate law for this reaction.
b. Calculate the half-life for the reaction.
C.Calculate the concentration of B after 5.0 X 10^-3 s has elapsed.
a. The integrated rate law for a zero-order reaction is given by the equation: [A] = [A]0 - kt
b. The half-life for a zero-order reaction can be calculated using the equation: t1/2 = [A]0 / (2k)
c. To calculate the concentration of B after a specific time, we need to know the stoichiometry of the reaction. Without that information, we cannot determine the concentration of B solely based on the given reaction equation.
a. The integrated rate law for a zero-order reaction is given by the equation: [A] = [A]0 - kt. Since the reaction A → B + C is known to be zero-order in A, we can write the integrated rate law as [A] = [A]0 - kt.
b. The half-life for a zero-order reaction can be calculated using the equation: t1/2 = [A]0 / (2k). In this case, the initial concentration of A, [A]0, is given as 1.0 X 10^-3 M, and the rate constant, k, is given as 5.0 X 10^-2 mol/L • s. Plugging these values into the equation, we can calculate the half-life for the reaction.
t1/2 = (1.0 X 10^-3 M) / (2 * 5.0 X 10^-2 mol/L • s)
= 1.0 X 10^-3 M / (1.0 X 10^-1 mol/L • s)
= 1.0 X 10^-2 s
Therefore, the half-life for the reaction is 1.0 X 10^-2 seconds.
c. To calculate the concentration of B after 5.0 X 10^-3 seconds have elapsed, we need to know the stoichiometry of the reaction. The given reaction A → B + C does not provide enough information about the stoichiometry or the initial concentrations of B and C.
Without that information, we cannot determine the concentration of B solely based on the given reaction equation.
To know more about "Stoichiometry " refer here:
https://brainly.com/question/28780091#
#SPJ11
In what direction, if any, would the equilibrium be shifted if the following changes were done on the reactions? (g)+H 2
O(g)⇔CO 2
( g)+H 2
( g) is added to reaction
Adding H2(g) to the reaction shifts the equilibrium position to the right, favoring the formation of CO2(g) and H2O(g).
When a reactant or product is added to a chemical reaction at equilibrium, the system responds by shifting the equilibrium position to counteract the change. In this case, adding H2(g) to the reaction:
CO(g) + H2O(g) ⇌ CO2(g) + H2(g)
will cause the equilibrium to shift to the right, favoring the formation of CO2(g) and H2(g).
To understand why this occurs, we can consider Le Chatelier's principle, which states that a system at equilibrium will adjust to minimize the effect of any change imposed upon it.
In the given reaction, the addition of H2(g) increases the concentration of one of the reactants. According to Le Chatelier's principle, the equilibrium will shift in the direction that reduces the concentration of the added substance. In this case, the equilibrium will shift to the right, favoring the formation of CO2(g) and H2(g), as it reduces the concentration of the added H2(g).
The shift to the right occurs because the reaction consumes the excess H2(g) to form more CO2(g) and H2O(g) until a new equilibrium is reached. The increased concentration of CO2(g) and H2O(g) results in an increased yield of these products.
In summary, the addition of H2(g) to the reaction shifts the equilibrium position to the right, favoring the formation of CO2(g) and H2O(g). This shift occurs in accordance with Le Chatelier's principle, which predicts that the equilibrium will adjust to minimize the effect of the added substance.
To learn more about equilibrium click here: brainly.com/question/29359391
#SPJ11
Match the following aqueous solutions with the appropriate letter from the column on the right. 1.0.127 mCr(CH 3
COO) 2
2.0.137mCrCl 2
3.0.220mBaS
4.0.350 m Ethylene glycol (nonelectrolyte)
A. Highest boiling point B. Second highest boiling point C. Third highest boiling point D. Lowest boiling point
The matching of the aqueous solutions with the appropriate letter from the column on the right is as follows:
1. 0.127 m Cr(CH3COO)2 - C. Third highest boiling point
2. 0.137 m CrCl2 - B. Second highest boiling point
3. 0.220 m BaS - A. Highest boiling point
4. 0.350 m Ethylene glycol (nonelectrolyte) - D. Lowest boiling point
The boiling point elevation is a colligative property that depends on the concentration of solute particles in a solution. The greater the concentration, the higher the boiling point of the solution.
In this case, the solutions containing ionic compounds (Cr(CH3COO)2, CrCl2, and BaS) will dissociate into ions and increase the concentration of solute particles in the solution, leading to a higher boiling point.
Among the ionic solutions, BaS (0.220 m) will have the highest boiling point since it has the highest concentration.
On the other hand, ethylene glycol is a nonelectrolyte, meaning it does not dissociate into ions in solution. Therefore, it will have the lowest boiling point among the given solutions.
Based on these considerations, the matching is as follows:
1. 0.127 m Cr(CH3COO)2 - C. Third highest boiling point
2. 0.137 m CrCl2 - B. Second highest boiling point
3. 0.220 m BaS - A. Highest boiling point
4. 0.350 m Ethylene glycol (nonelectrolyte) - D. Lowest boiling point
Learn more about solutions here: brainly.com/question/25326161
#SPJ11
The matching of the aqueous solutions with the appropriate letter from the column on the right is as follows:
1. 0.127 m Cr(CH3COO)2 - C. Third highest boiling point
2. 0.137 m CrCl2 - B. Second highest boiling point
3. 0.220 m BaS - A. Highest boiling point
4. 0.350 m Ethylene glycol (nonelectrolyte) - D. Lowest boiling point
The boiling point elevation is a colligative property that depends on the concentration of solute particles in a solution. The greater the concentration, the higher the boiling point of the solution.
In this case, the solutions containing ionic compounds (Cr(CH3COO)2, CrCl2, and BaS) will dissociate into ions and increase the concentration of solute particles in the solution, leading to a higher boiling point.
Among the ionic solutions, BaS (0.220 m) will have the highest boiling point since it has the highest concentration.
On the other hand, ethylene glycol is a nonelectrolyte, meaning it does not dissociate into ions in solution. Therefore, it will have the lowest boiling point among the given solutions.
Based on these considerations, the matching is as follows:
1. 0.127 m Cr(CH3COO)2 - C. Third highest boiling point
2. 0.137 m CrCl2 - B. Second highest boiling point
3. 0.220 m BaS - A. Highest boiling point
4. 0.350 m Ethylene glycol (nonelectrolyte) - D. Lowest boiling point
Learn more about solutions here: brainly.com/question/25326161
#SPJ11
How to prepare \( 70 \% \) (v'v) Ethanol in water? ( Ethanol is absolute, Mut \( 46 g \) mon) By diluting \( 70 \mathrm{mi} \) of Ethanol \( 1000 \mathrm{~mL} \) Deionized water By diluting \( 140 \ma
Preparing (70%) (v/v) ethanol in water: Ethanol is a chemical compound with the formula [tex]C2H5OH[/tex]. Ethanol is a versatile solvent that can dissolve both polar and nonpolar molecules.
It is a common solvent used in the laboratory and industry. Ethanol is commonly used as a solvent because it is less toxic and less volatile than other solvents. Here's how to make (70%) (v/v) ethanol in water:Step 1: Calculate the amount of ethanol required.
To make (70%) (v/v) ethanol in water, you will need to dilute 70 ml of absolute ethanol to 1000 mL of deionized water.
The amount of ethanol required can be calculated using the following formula:Amount of ethanol required = (volume of ethanol/volume of the final solution) x 100. Amount of ethanol required = (70/1000) x 100. Amount of ethanol required = 7 mL Step 2: Measure out the ethanol. Using a measuring cylinder, measure out 7 mL of absolute ethanol and pour it into a 1000 mL volumetric flask.
Step 3: Add deionized water to the volumetric flask. Fill the volumetric flask with deionized water until the meniscus reaches the 1000 mL mark on the flask. Step 4: Mix the solutionTo mix the solution, place the stopper on the flask and shake it vigorously.
Be sure to mix the solution thoroughly to ensure that the ethanol is evenly distributed throughout the water. The solution is now ready to use.The density of ethanol is 0.789 g/mL. Therefore, 70 mL of ethanol has a mass of 55.23 g. To make a 70% (v/v) solution, you would need to add 55.23 g of ethanol to enough water to make a total volume of 100 mL.
To know more about Ethanol here
https://brainly.com/question/29294678
#SPJ11
In the process of separation of 3.01 grams of a ternary mixture
of SiO2, KCl and BaCO3, we had a 3.65%
error.
What is the total mass of recovered components?
1) 2.90
2) 3.62
3) 3.01
4) 3.51
The total mass of the recovered components is 2.90 grams.
Given that there was a 3.65% error in the separation process, we can calculate the total mass of the recovered components as follows:
Total mass = Mass before separation - Error
Mass before separation = 3.01 grams
Error = 3.65% of 3.01 grams
Error = 0.0365 * 3.01 grams
Error = 0.1097 grams
Total mass = 3.01 grams - 0.1097 grams
Total mass = 2.90 grams
Therefore, the total mass of the recovered components is 2.90 grams. Option 1) is the correct answer.
To know more about "Recovered components" refer here:
https://brainly.com/question/31023982#
#SPJ11
In the MIT buffer video, what resource did the presenter use to
illustrate a model of a buffer system?
Select one:
a.Velcro and ping pong balls
b.Gummy bears
c.Molecular model kit
d.Toothpicks and mar
In the MIT buffer video, the presenter used a molecular model kit to illustrate a model of a buffer system.
The molecular model kit consists of small, interconnected balls representing atoms and bonds, allowing the presenter to visually demonstrate the arrangement and interactions between the molecules involved in a buffer system.
The use of a molecular model kit helps to enhance understanding and visualization of the buffer system's components and their behavior. The presenter can manipulate the model to demonstrate concepts such as buffering capacity, equilibrium between the acid and conjugate base, and the role of pH in maintaining the buffer's effectiveness.
To know more about MIT buffer refer here
brainly.com/question/31847096#
#SPJ11
7) Choose the correct shape, weak or strong field, and number of unpaired electrons for \( \left[\mathrm{Co}\left(\mathrm{NH}_{3}\right)\right]^{3+} \) A) octahedral, strong, 0 D) square planar, weak, 0 scl 6 Ch tetrahedral, strong, 0 D), octahedral, weak, 6 C) square planar, strong, 6
The correct shape, weak or strong field, and number of unpaired electrons for \( \left[\mathrm{Co}\left(\mathrm{NH}_{3}\right)\right]^{3+} \) are: octahedral, weak field, 6 unpaired electrons.
The coordination complex \(\left[\mathrm{Co}\left(\mathrm{NH}_{3}\right)\right]^{3+} \) contains the central metal ion cobalt (Co) coordinated with ammonia ligands (NH₃).
Octahedral: The coordination number for the central cobalt ion is 6, indicating an octahedral geometry. In an octahedral complex, there are six ligands arranged around the central metal ion.
Weak Field: The ammonia ligands (NH₃) are weak field ligands. This means that they cause a small splitting of the d orbitals of the central metal ion. As a result, the crystal field splitting energy (Δ) is relatively low.
Number of unpaired electrons: In an octahedral complex with weak field ligands, the cobalt ion (Co) experiences a high spin configuration. This means that all the d orbitals of the cobalt ion are singly occupied by electrons, resulting in a maximum of 6 unpaired electrons.
Therefore, the correct answer is: octahedral, weak field, and 6 unpaired electrons.
To learn more about unpaired electrons here:
https://brainly.com/question/29656941
#SPJ11
1. For the system: A + B ⇌ C + D ; keq = 1.1 x 10-10 . The equilibrium mixture exist as A. approximately 50% reactants and 50% products
B. mostly A and B
C. mostly C and D
2. For the reaction: I2(g) + Cl2g) ⇌ 2ICl(g) the Kp value is 100.4.
The Kp value for: 2ICl(g) ⇌ I2(g) + Cl2g) is 0.00996
True
False
The Keq value of [tex]1.1 x 10^-10[/tex] shows that at equilibrium, there is a higher concentration of reactants than products. Therefore, the answer is mostly A and B.
1. For the system: A + B ⇌ C + D ; keq = [tex]1.1 x 10-10[/tex] . The equilibrium mixture exists as (B) mostly A and B. The Keq value of [tex]1.1 x 10^-10[/tex] shows that at equilibrium, there is a higher concentration of reactants than products. Therefore, the answer is mostly A and B. 2. For the reaction: I2(g) + Cl2g) ⇌ 2ICl(g) the Kp value is 100.4. The Kp value for: 2ICl(g) ⇌ I2(g) + Cl2g) is (A) true.
The relationship between the Kp values of the reverse and the forward reactions is that they are reciprocal of each other. Mathematically, [tex]Kp1 x Kp2 = Kp3[/tex], where Kp1 is the Kp value of the forward reaction, Kp2 is the Kp value of the reverse reaction, and Kp3 is the equilibrium constant. Thus, Kp1 is 100.4 and Kp2 is 0.00996, and when multiplied, they yield Kp3 as 1.0. Answer: (B) mostly A and B; (A) True.
To know more about concentration visit:-
https://brainly.com/question/30862855
#SPJ11
Consider the electrolysis of a molten mixture of CaCl 2
and MgI 2
by using inert electrode. (i) State the ions attracted at the anode and cathode? (ii) Determine which one of the ions attracted at the anode and cathode will be oxidized/reduced? (iii) Identify the product formed at anode and cathode? (iv) Sketch the electrolysis cell and label the parts (the anode, the cathode, and the direction of electron flow).
The process of electrolysis is initiated by the application of a voltage across the molten electrolyte. During electrolysis, the I− ions are oxidized to I2, while the Ca2+ ions are reduced to calcium metal.
(i) At anode, negatively charged anions (I− ions) will be attracted and at the cathode, positively charged cations (Ca2+ ions) will be attracted.
(ii) At anode, the I− ions will be oxidized to I2 while at the cathode, Ca2+ ions will be reduced to calcium metal.
(iii) The product formed at the anode will be I2 and the product formed at the cathode will be calcium metal.
(iv) The following is the sketch of the electrolysis cell and its parts;
Anode (-ve electrode) | CaCl2 / MgI2 (molten mixture) | Cathode (+ve electrode)Ionic substance CaCl2 / MgI2 is dissolved in their own fused state and we get a molten mixture.
Here, the two substances dissociate into their respective cations and anions. CaCl2 dissociates into Ca2+ and 2Cl- while MgI2 dissociates into Mg2+ and 2I-.
To know more about electrolysis visit:-
https://brainly.com/question/30003685
#SPJ11
In addition to ecological harm, new studies are showing that
dams and reservoirs emit greenhouse gases like methane. Should dams
still be considered a "green" form of energy?
While dams have traditionally been regarded as a "green" energy option due to their ability to generate electricity without burning fossil fuels, recent research has shed light on their environmental impact which is harmful.
It has been discovered that dams and reservoirs can release significant amounts of greenhouse gases, particularly methane, into the atmosphere. Methane is a potent greenhouse gas that contributes to climate change.
The emission of methane from dams and reservoirs occurs as a result of the decomposition of organic matter in the flooded areas. The submerged vegetation and soil release methane during the anaerobic decomposition process. Additionally, the flow of water through the dam structures can cause the entrainment and release of dissolved methane.
Considering these findings, the sustainability and environmental friendliness of dams as a form of energy generation are being called into question. While they offer benefits such as renewable power generation and water storage for irrigation, the emissions of greenhouse gases undermine their green credentials.
As the focus on mitigating climate change intensifies, it becomes important to consider the overall environmental impact of dams and explore alternative energy sources that have a lower carbon footprint.
learn more about ecology :
https://brainly.com/question/28548651
#SPJ4
The enthalpy of vaporization of Substance X is 15.0molkJ and its normal boiling point is 135,∘C. Calculate the vapor pressure of X at 94.∘C. Round your answer to 2 significant digits.
The vapor pressure of Substance X at 94°C is approximately 0.999 atm.
For calculating the vapor pressure of Substance X at a given temperature, we can use the Clausius-Clapeyron equation:
ln(P2/P1) = -ΔHvap/R * (1/T2 - 1/T1)
where P1 is the vapor pressure at temperature T1,
P2 is the vapor pressure at temperature T2,
ΔHvap is the enthalpy of vaporization,
R is the gas constant (8.314 J/(mol·K)), and
T1 and T2 are the temperatures in Kelvin.
First, we need to convert the temperatures from Celsius to Kelvin:
T1 = 135°C + 273.15 = 408.15 K (normal boiling point)
T2 = 94°C + 273.15 = 367.15 K (given temperature)
Now, we can substitute the values into the equation and solve for ln(P2/P1):
ln(P2/P1) = -15.0 molkJ / (8.314 J/(molK)) * (1/367.15 K - 1/408.15 K)
≈ -3.86 * (0.00273 - 0.00245)
≈ -3.86 * 0.00028
≈ -0.00108
To find P2/P1, we take the exponential of both sides:
P2/P1 = e^(-0.00108)
P2 = P1 * e^(-0.00108)
Since we are given the value of P1 as 1 atm (standard pressure), we can calculate P2:
P2 = 1 atm * e^(-0.00108)
Using a calculator, we find that P2 ≈ 0.999 atm.
Therefore, the vapor pressure of Substance X at 94°C is approximately 0.999 atm.
To know more about vapor pressure refer here:
https://brainly.com/question/29640321?#
#SPJ11
what is the name of the following compound? question 4 options: (1r,2s)-1-iodo-2-methylcyclohexane (1r,2r)-1-iodo-2-methylcyclohexane cis-1-iodo-2-methylcyclohexane trans-1-iodo-2-methylcyclohexane (1s,2r)-1-iodo-2-methylcyclohexane
The correct name of the compound is cis-1-iodo-2-methylcyclohexane. Option C is correct.
The term "cis" indicates that the two substituents, in this case, the iodine (I) and the methyl (CH₃) groups, are on the same side of the cyclohexane ring. In cis-1-iodo-2-methylcyclohexane, the iodine and methyl groups are both located on the same side of the ring.
(1R,2S)-1-iodo-2-methylcyclohexane, and (1S,2R)-1-iodo-2-methylcyclohexane, refer to specific stereochemical configurations around the stereocenters of the compound. However, without more information regarding the stereochemistry of the molecule, we cannot determine the absolute configurations.
(1R,2R)-1-iodo-2-methylcyclohexane, refers to a different stereoisomer where the iodine and methyl groups are on opposite sides of the ring, resulting in a trans configuration. This will not the correct name for a given compound.
Hence, C. is the correct option.
To know more about cyclohexane ring here
https://brainly.com/question/24915976
#SPJ4
--The given question is incomplete, the complete question is
"What is the name of the following compound? question 4 options: A) (1r,2s)-1-iodo-2-methylcyclohexane B) (1r,2r)-1-iodo-2-methylcyclohexane C) cis-1-iodo-2-methylcyclohexane D) trans-1-iodo-2-methylcyclohexane E) (1s,2r)-1-iodo-2-methylcyclohexane."--
Calculate the solubility of Co (OH)2 in water at 25 °C. You'll find Kp data in the ALEKS Data tab. sp Round your answer to 2 significant digits. - 00 20 X 5 ?
The solubility of Co(OH)2 in water at 25°C is 5.0 × 10−6 M.
Solubility product (Ksp) is a constant that expresses the solubility of a sparingly soluble salt in an aqueous solution. At a given temperature, it indicates the amount of salt that dissolves per unit volume of the solution. The solubility product of Co(OH)2 at 25°C is calculated as follows:
Co(OH)2 ⇌ Co2+ + 2OH−
Initial concentration (mol/L) 0 0 0
Change in concentration (mol/L) x x +2x
Equilibrium concentration (mol/L) 0 + x x 2x
The Ksp expression for Co(OH)2 is:
Ksp = [Co2+][OH−]2Ksp = (x)(2x)2Ksp = 4x3
Since the initial concentration of Co(OH)2 is 0, the value of Ksp is equal to the equilibrium concentration of [Co2+] multiplied by the square of the equilibrium concentration of [OH−].
Ksp = [Co2+][OH−]2Ksp = (x)(2x)2Ksp = 4x3
To solve for x, we will substitute Ksp into the equation and simplify it.Ksp = 4x3= 2.0 × 10−15x3 = 5.0 × 10−16x = 5.0 × 10−6 M
To learn more about solubility click here:
https://brainly.com/question/9098308#
#SPJ11
7. The solubility of nitrogen gas in water at 25 ∘
C and a partial pressure of N 2
of 0.78 atm is 5.5×10 −4
mol/L. A. Calculate \&a, Henry's Law constant for nitrogen gas, at this temperature using the solubility at 0.78 atm. S=h ai ×P Answer: 7.0×10 −4
mol/L atm B. Use this value of k a to find the solubility of nitrogen gas at a nitrogen partial pressure of 3.0 atm at 25 ∘
C. Answer =0.0021 mol/L. 3 C. What happened to the solubility of N 2
as its pressure increased from 0.78 atm to 3.0 atm ? D. Calculate the mass of N 2
(28.0 g/mol) dissolved in 10.0 L of water at 3.0 atm and 25 ∘
C. Answer =0.59 g N 2
HINT: Use Henry's Law: S=ℏ : ×P; note that S is the solubility of N 2
in moles dissolved in lliter. But the volume of water is 10.0 L and we want mass in grams instead of moles. 6. Which ion in each of the following pairs would you expect to be more strongly hydrated? Explain the reasoning behind your choice. (Think about charge density, the ratio of an ion's charge to its volume: charge density α atomic or ionic size ionic charge
) HINT: charge density increases with increasing ionic charge and charge density increases with decreasing atomic or ionic size. a. K +
or Cl −
? b. Ca 2+
or Sr 2+
c. Sn 2+
or Sn 4+
The solubility of nitrogen gas in water increases with the partial pressure of the gas. The mass of nitrogen gas dissolved in 10.0 L of water at 3.0 atm and 25°C can be calculated using Henry's Law. So for option a its 7.0×10^(-4) mol/L atm , for option b its 0.0021 mol/L, for option d its 0.59 g.
A. To calculate Henry's Law constant (k), we use the formula S = k * P, where S is the solubility and P is the partial pressure. Rearranging the formula, we have k = S/P. Substituting the given solubility of 5.5×10^(-4) mol/L and partial pressure of 0.78 atm, we find k = 5.5×10^(-4) mol/L / 0.78 atm = 7.0×10^(-4) mol/L atm.
B. Using the calculated Henry's Law constant (k = 7.0×10^(-4) mol/L atm), we can find the solubility of nitrogen gas at a nitrogen partial pressure of 3.0 atm. Substituting the new pressure into the formula S = k * P, we get S = (7.0×10^(-4) mol/L atm) * 3.0 atm = 0.0021 mol/L.
C. As the nitrogen partial pressure increased from 0.78 atm to 3.0 atm, the solubility of nitrogen gas increased. This is in accordance with Henry's Law, which states that the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid.
D. To calculate the mass of nitrogen gas dissolved in 10.0 L of water at 3.0 atm and 25°C, we can use the molar mass of nitrogen gas (28.0 g/mol) and the solubility value in moles per liter. Multiplying the solubility (0.0021 mol/L) by the volume of water (10.0 L) and the molar mass of nitrogen gas, we find the answer to be 0.59 g of N2.
To know more about Henry's Law constant here: brainly.com/question/30636760
#SPJ11
which of the following will have the highest 5th ionization level: Te, Kr, As, Si
Te will have the highest 5th ionization level among the given elements.
The ionization energy is the energy required to remove an electron from an atom or ion. Generally, ionization energy increases as you remove successive electrons from an element.
Among the given elements, Te (Tellurium) will have the highest 5th ionization level. This means that it will require the most energy to remove the 5th electron from a Te atom or ion compared to Kr (Krypton), As (Arsenic), and Si (Silicon). The ionization energy tends to increase as you move across a period in the periodic table and decrease as you move down a group. Since Te is further to the right in the periodic table compared to the other elements, it will have a higher ionization energy and thus a higher 5th ionization level.
To know more about ionization, click here:
brainly.com/question/1602374
#SPJ11
using the procedure and data collection section below, read through the procedural information for this scientific investigation. based on your understanding of the procedure, develop your own hypotheses, which describe your expected results. specifically, what do you think the relationship between the average atomic mass, percent composition and each isotopes mass?
In general, the average atomic mass of an element is calculated based on the percent composition of its isotopes and their respective masses. Isotopes are atoms of the same element that have different numbers of neutrons and, therefore, different masses.
The percent composition represents the relative abundance of each isotope in a given sample of an element. It is usually expressed as a percentage and reflects the proportion of each isotope present.
The relationship between the average atomic mass, percent composition, and each isotope's mass can be described as follows:
The average atomic mass is a weighted average of the masses of all the isotopes of an element, with the weights determined by their percent composition. Isotopes with higher percent composition contribute more to the average atomic mass.
The percent composition of each isotope is determined by the natural abundance or the frequency of occurrence of that isotope in nature. Isotopes with higher natural abundance will have a greater influence on the percent composition.
Each isotope's mass is a constant property and represents the actual mass of the individual isotope. The different masses of isotopes contribute to the variation in the average atomic mass.
Based on this understanding, a hypothesis could be that the average atomic mass of an element will be closer to the mass of the most abundant isotope if the percent composition of that isotope is higher. Conversely, if the percent composition of a less abundant isotope is higher, it would have a greater influence on the average atomic mass, causing it to deviate more from the mass of the most abundant isotope.
Learn more about the isotope:
brainly.com/question/28039996
#SPJ4
write the skeleton equation for hydrogen + oxygen -> water
The skeleton equation for the reaction between hydrogen and oxygen to form water is 2H₂ + O₂ -> 2H₂O
In this equation, the reactants are hydrogen (H₂) and oxygen (O₂), and the product is water (H₂O). The equation represents the balanced chemical equation for the reaction, meaning that the number of atoms of each element is the same on both sides of the equation. The coefficient "2" in front of H₂ indicates that two molecules of hydrogen are reacting.
The coefficient "1" in front of O₂ indicates that one molecule of oxygen is reacting. The coefficient "2" in front of H₂O indicates that two molecules of water are produced. In this reaction, the total number of hydrogen atoms and oxygen atoms remains the same on both sides of the equation.
The reaction between hydrogen and oxygen to form water is a highly exothermic reaction and is commonly known as combustion or burning. It is a vital process for energy production, as it releases a significant amount of heat energy.
know more about hydrogen atoms here:
https://brainly.com/question/28499820
#SPJ8
A) How many grams of water can be cooled from 45 ∘C to 15 ∘C by the evaporation of 39 g of water? (The heat of vaporization of water in this temperature range is 2.4 kJ/g. The specific heat of water is 4.18 J/g⋅K.)
B) How much heat energy, in kilojoules, is required to convert 65.0 g of ice at −18.0 ∘C to water at 25.0 ∘C ? Express your answer to three significant figures and include the appropriate units.
The constants for H2OH2O are shown here:
Specific heat of ice: sice=2.09 J/(g⋅∘C)
Specific heat of liquid water: swater=4.18 J/(g⋅∘C)
Enthalpy of fusion H2O(s)→H2O(l)): ΔHfus=334 J/g
Enthalpy of vaporization (H2O(l)→H2O(g): ΔHvap=2250 J/g
A. To cool 39 g of water from 45°C to 15°C by evaporation, approximately 25.55 g of water will be evaporated.
B. To convert 65.0 g of ice at -18.0°C to water at 25.0°C, approximately 282.88 kJ of heat energy is required.
A. To calculate the amount of water that can be cooled by the evaporation of 39 g of water, we need to determine the heat energy required to cool water from 45°C to 15°C and then divide it by the heat of vaporization.
1. Calculate the heat energy required to cool water:
The specific heat capacity of water is 4.18 J/g⋅K. The temperature change is (45°C - 15°C) = 30°C. Using the formula Q = m * c * ΔT, where Q is the heat energy, m is the mass, c is the specific heat capacity, and ΔT is the temperature change, we can calculate the heat energy required to cool the water.
Q = (39 g) * (4.18 J/g⋅K) * (30°C)
2. Determine the amount of water evaporated:
To find the amount of water evaporated, we divide the heat energy required by the heat of vaporization, which is 2.4 kJ/g.
Amount of water evaporated = (Q / ΔHvap) = (Q / 2.4 kJ/g)
B. To determine the heat energy required to convert 65.0 g of ice at -18.0°C to water at 25.0°C, we need to consider the following steps:
1. Calculate the heat energy required to raise the temperature of the ice from -18.0°C to 0°C:
The specific heat capacity of ice is 2.09 J/(g⋅°C). The temperature change is (0°C - (-18.0°C)) = 18.0°C. Using the formula Q = m * c * ΔT, where Q is the heat energy, m is the mass, c is the specific heat capacity, and ΔT is the temperature change, we can calculate the heat energy required.
Q1 = (65.0 g) * (2.09 J/(g⋅°C)) * (18.0°C)
2. Calculate the heat energy required to convert the ice at 0°C to water at 0°C:
The enthalpy of fusion is ΔHfus = 334 J/g. The mass is 65.0 g.
Q2 = (65.0 g) * (334 J/g)
3. Calculate the heat energy required to raise the temperature of the water from 0°C to 25.0°C:
The specific heat capacity of water is 4.18 J/(g⋅°C). The temperature change is (25.0°C - 0°C) = 25.0°C. Using the formula Q = m * c * ΔT, we can calculate the heat energy required.
Q3 = (65.0 g) * (4.18 J/(g⋅°C)) * (25.0°C)
4. Add up the heat energies from the three steps:
Total heat energy = Q1 + Q2 + Q3
In summary, to cool 39 g of water from 45°C to 15°C by evaporation, we need to calculate the heat energy required to cool the water and then divide it by the heat of vaporization.
To convert 65.0 g of ice at -18.0°C to water at 25.0°C, we need to calculate the heat energies required for each step: raising the temperature of the ice, converting the ice to water, and raising the temperature of the water. Finally, we add up these heat energies to obtain the total heat energy required.
To know more about evaporation refer here:
https://brainly.com/question/28319650#
#SPJ11
1. Using Hess's Law, calculate the anticipated enthalpy of dissolution and reaction for NaOH (s) and HCI (aq) (e.g. AH) using your your experimental molar enthalpies of the heat of dissolution of NaOH (s) (e.g. AHdiss) and the heat of reaction of NaOH (aq) & HCI (aq) (e.g. AH₂). 2. How does your theoretical anticipated enthalpy of dissolution and reaction for NaOH (s) and HCI (aq) (e.g. AH,) compare to your experimental observations? If they are substantially different, discuss pos- sible sources of error that could have led to the difference in your enthalpies.
The enthalpy of the reaction from the given data and the Hess law is -14 Kcal.
What is the Hess law?
The fundamental law of thermodynamics known as Hess's Law asserts that the route taken from the starting to the final state has no bearing on the total enthalpy change of a chemical reaction. It is named after the Swiss-Russian chemist Germain Hess. In other words, the intermediate stages or the precise route used have no bearing on the overall change in enthalpy (H) for a reaction and are only taken into account when determining the beginning and final states.
We can see that the enthalpy of the NaCl is obtained from;
ΔHreaction= [(-148) + (-68)] - [(-120) + (-82)]
= (-216) + 202
= -14 Kcal
Learn more about Hess law:https://brainly.com/question/10504932
#SPJ4
Aluminum reacts with excess hydrochloric acid to form aqueous aluminum chloride and 37.3 mL of hydrogen gas over water at 27°C and 751 mmHg. How many grams of aluminum reacted? The partial pressure of water at 27°C is 26.8 mmHg.
The amount of aluminum that reacted is approximately 0.069 grams.
To determine the mass of aluminum that reacted, we need to use the ideal gas law and consider the partial pressure of hydrogen gas. First, we calculate the pressure of hydrogen gas by subtracting the partial pressure of water vapor from the total pressure. The pressure of hydrogen gas is 751 mmHg - 26.8 mmHg = 724.2 mmHg.
Next, we convert the pressure of hydrogen gas from mmHg to atm by dividing by 760 mmHg/atm, giving us 0.953 atm.
Using the ideal gas law equation PV = nRT, we can calculate the number of moles of hydrogen gas. The volume of hydrogen gas is given as 37.3 mL, which we convert to liters by dividing by 1000 mL/L, giving us 0.0373 L. The temperature is given as 27°C, which we convert to Kelvin by adding 273.15, giving us 300.15 K. The ideal gas constant R is 0.0821 L∙atm/(mol∙K).
Plugging the values into the ideal gas law equation, we can solve for the number of moles of hydrogen gas: (0.953 atm) * (0.0373 L) = n * (0.0821 L∙atm/(mol∙K)) * (300.15 K).
Simplifying the equation, we find that the number of moles of hydrogen gas is approximately 0.00139 moles.
Since the balanced chemical equation between aluminum and hydrochloric acid is 2Al + 6HCl → 2AlCl₃ + 3H₂, we can conclude that 2 moles of aluminum react to produce 3 moles of hydrogen gas.
Using this ratio, we can calculate the number of moles of aluminum that reacted: (0.00139 mol H₂) * (2 mol Al / 3 mol H₂) = 0.000926 moles Al.
Finally, we can convert moles of aluminum to grams using the molar mass of aluminum (26.98 g/mol): (0.000926 mol Al) * (26.98 g/mol) ≈ 0.069 g Al.
learn more about ideal gas law here:
https://brainly.com/question/30458409
#SPJ11
if
an electron is in the n=9 pronciple level of hydron atom what is
fhe ionization energy of this electron from this state in
kj/mol
The ionization energy of an electron in the n=9 principle level of a hydrogen atom is 0.0031577 kJ/mol.
The ionization energy is the energy required to remove an electron from an atom or ion. In the case of a hydrogen atom, the ionization energy can be calculated using the formula:
Ionization energy = -R∞ * ((1/n_final²) - (1/n_initial²))
where R∞ is the Rydberg constant (2.18 × 10⁻¹⁸ J), n_final is the final principle level, and n_initial is the initial principle level.
For the given scenario, the electron is in the n=9 principle level of a hydrogen atom. To calculate the ionization energy, we need to set n_final as infinity since the electron is being completely removed from the atom. Plugging the values into the formula, we get:
Ionization energy = -2.18 × 10⁻¹⁸ J * ((1/∞²) - (1/9²))
= 0.0031577 kJ/mol
learn more about ionization energy here:
https://brainly.com/question/28385102
#SPJ11
is molar mass, molarity, molality, parts per million, or mole fraction temperature dependent and why?
options- depends on volume, depends on mass, depends on number of moles.
Among the options provided (molar mass, molarity, molality, parts per million, and mole fraction), only molar mass is not temperature dependent.
Molar mass is a physical property of a substance and represents the mass of one mole of that substance. It is a fixed value for a given compound and does not change with temperature.
On the other hand, the remaining options (molarity, molality, parts per million, and mole fraction) are all temperature-independent, meaning they do not depend on temperature, volume, or mass. Instead, they are related to the number of moles of solute or solvent in a given solution or mixture.
Molarity (moles of solute per liter of solution) and parts per million (ppm) both depend on the volume of the solution.
Molarity is calculated by dividing the number of moles of solute by the volume of the solution in liters, while parts per million represents the number of parts of solute per one million parts of the solution.
Molality (moles of solute per kilogram of solvent) depends on the mass of the solvent. It is calculated by dividing the number of moles of solute by the mass of the solvent in kilograms.
Mole fraction is a dimensionless quantity that represents the ratio of the number of moles of a component to the total number of moles in the system. It is independent of temperature, volume, or mass, as it is solely based on the relative amounts of different components in a mixture.
In summary, molar mass is the only option among those provided that is not temperature dependent.
The remaining options (molarity, molality, parts per million, and mole fraction) are all independent of temperature but may depend on either volume, mass, or the number of moles.
To learn more about molarity click here; brainly.com/question/30824831
#SPJ11
Find the molarity of:
a. 10% NaOH
b. 1.2% KOH
a. The molarity of a 10% NaOH solution is 2.5 M. b. The molarity of a 1.2% KOH solution is 0.0214 M.
To find the molarity of a solution, we need to know the concentration of the solute in moles per liter (mol/L or M). The given percentages represent the mass of the solute in the solution.
a. For a 10% NaOH solution:
Assuming we have 100 mL (0.1 L) of the solution, the mass of NaOH in the solution is 10% of 0.1 L, which is 0.01 L * 0.1 kg/L = 0.01 kg.
The molar mass of NaOH is 22.99 g/mol + 16.00 g/mol + 1.01 g/mol = 40.00 g/mol.
Converting the mass of NaOH to moles: 0.01 kg * (1000 g/kg) / 40.00 g/mol = 0.25 mol.
The volume of the solution is 0.1 L.
Therefore, the molarity of the 10% NaOH solution is 0.25 mol / 0.1 L = 2.5 M.
b. For a 1.2% KOH solution:
Using the same approach as above, we find that the mass of KOH in 100 mL (0.1 L) of the solution is 0.0012 L * 0.1 kg/L = 0.00012 kg.
The molar mass of KOH is 39.10 g/mol + 16.00 g/mol + 1.01 g/mol = 56.11 g/mol.
Converting the mass of KOH to moles: 0.00012 kg * (1000 g/kg) / 56.11 g/mol = 0.00214 mol.
The volume of the solution is 0.1 L.
Therefore, the molarity of the 1.2% KOH solution is 0.00214 mol / 0.1 L = 0.0214 M.
To know more about molarity, click here:
brainly.com/question/31545539
#SPJ11
Atomic Term symbols What atomic term symbols arise from the excited state configuration 1s13d1 for the lithium atom? Include the J quantum number subscripts in your list of all the term symbols. Identify the lowest energy state and its degeneracy.
The singlet state (1S_0), which has a degeneracy of 1 (non-degenerate), has the lowest energy state.
The excited state configuration of lithium atom, 1s13d1, indicates that one of the electrons has been promoted from the 2s orbital to the 3d orbital. To determine the atomic term symbols, we need to consider the total angular momentum quantum number (J) and the total spin quantum number (S).
For the lithium atom, the 3d orbital is higher in energy than the 2s orbital. Therefore, we can consider the ground state configuration of lithium as 1s22s1.
Since the 3d orbital is empty in the ground state, the electron promotion from the 2s orbital to the 3d orbital results in an excited state configuration of 1s13d1.
The term symbols are represented by the following notation: ^2S+1L_J.
For the excited state configuration of lithium (1s13d1), the possible term symbols arise from the coupling of the total angular momentum J with the total spin S. In this case, the possible values of J are 2, 1, and 0 because the 3d orbital has a total angular momentum quantum number of 2.
The lowest energy state will have the lowest value of J. In this case, J = 0 corresponds to the singlet state, J = 1 corresponds to the triplet state, and J = 2 corresponds to the quintet state.
Therefore, the atomic term symbols for the excited state configuration 1s13d1 of the lithium atom are:
Singlet state: ^1S_0
Triplet state: ^3S_1
Quintet state: ^5S_2
The lowest energy state is the singlet state (^1S_0), and it has a degeneracy of 1 (non-degenerate).
To know more about energy state refer here:
https://brainly.com/question/32382203?#
#SPJ11
Determine the volume of 0.165 M NaOH solution required to neutralize each sample of hydrochloric acid. The neutralization reaction is: NaOH(aq) + HCl(aq)→H₂O(l) + NaCl(aq)
Volume of 0.165 M NaOH solution required to neutralize each sample of hydrochloric acid is 0.165 V liters or 165V mL.
The neutralization reaction is:
NaOH(aq) + HCl(aq) → H₂O(l) + NaCl(aq)
To calculate the volume of 0.165 M NaOH solution required to neutralize each sample of hydrochloric acid, we first need to balance the given neutralization reaction and find out the mole ratio of NaOH to HCl.The balanced chemical equation for the given reaction is:
NaOH(aq) + HCl(aq) → NaCl(aq) + H2O(l)
Molar ratio of NaOH to HCl is 1:1.Hence, 1 mole of NaOH reacts with 1 mole of HCl. According to the question, we don't have the concentration or volume of HCl solution. So, let's assume the volume and concentration of HCl solution to be V liters and C M respectively.Moles of HCl in V liters of C M solution = C × V
Volume of NaOH solution required to neutralize 1 mole of HCl = 1 L 0.165 M = 0.165 L or 165 mLAs we know that one mole of NaOH reacts with one mole of HCl.
Therefore, moles of NaOH required to neutralize V liters of C M HCl solution = Moles of HCl in V liters of C M solution
So, volume of 0.165 M NaOH solution required to neutralize V liters of C M HCl solution = Moles of NaOH required × Volume of 0.165 M NaOH solution required to neutralize one mole of HCl= Moles of HCl in V liters of C M solution × 0.165 L
Volume of 0.165 M NaOH solution required to neutralize each sample of hydrochloric acid is 0.165 V liters or 165V mL.
To know more about neutralization click on below link :
https://brainly.com/question/14156911#
#SPJ11
Give the ground-state electron configurations of (a) ClF, (b)
CS, and (c) O2 −.
The ground state electron configuration of each of these is as follows -
a) ClF
The ground state electron configuration of the elements of compound ClF need to be accessed individually first for better understanding. Hence, their electron configurations are -
Cl: 1s² 2s² 2p⁶ 3s² 3p⁵
F: 1s² 2s² 2p⁵
The combined ground state electron configuration of ClF is-
ClF: 1s² 2s² 2p⁶ 3s² 3p⁴
b) CS
It is also a compound and hence taking individual ground state electron configurations of each elements are as follows -
C: 1s² 2s² 2p²
S: 1s² 2s² 2p⁶ 3s² 3p⁴
The combined ground state electron configuration is -
CS: 1s² 2s² 2p⁶ 3s² 3p⁴
c) [tex] {O_{2} }^{ - } [/tex]
The ground state electron configuration here is-
[tex] {O_{2} }^{ - } [/tex]: 1s² 2s² 2p⁶
Learn more about electron configuration -
https://brainly.com/question/26084288
#SPJ4
Which best explains the following reaction. OH OH H₂0 + This reaction works and the only ether product formed is shown. This reaction does not work because the major product would be an ester. This reaction does not work because three ethers can be formed. This reaction does not work because the major product would be an alkene formed by elimination. QUESTION 16 The product of a Fisher Esterification is shown below. Which best describes the functional groups of the reactants used to create the ester? alcohol and carboxylic acid O alcohol and aldehyde O aldehyde and carboxylic acid O alcohol and ketone OCHUCH
For the reaction "OH + OH → H₂O + ether," the main answer is: "This reaction works and the only ether product formed is shown."
The reaction provided, "OH + OH → H₂O + ether," can be classified as a condensation reaction. The two hydroxyl groups (OH) combine to form water (H₂O) while simultaneously creating an ether molecule.
"This reaction works and the only ether product formed is shown." This means that the reaction is successful, and the only product obtained is the ether as shown in the reaction equation.
As for Question 16, without a specific product or reactant provided, it is not possible to accurately determine the functional groups of the reactants used to create the ester. Therefore, none of the given options can be chosen as the correct answer.
The given reaction involves the condensation of two hydroxyl groups (OH) to form water (H₂O) and produce an ether molecule as the main product. This indicates that the reaction is successful in forming the desired ether product, without the formation of any other major products such as esters or alkenes.
To know more about condensation reaction refer here
https://brainly.com/question/26407138#
#SPJ11
Consider the reaction 2SO2(g)+O2(g)⟶2SO3(g) Use the standard thermodynamic data in the tables linked above. Calculate ΔG for this reaction at 298.15 K if the pressure of SO3( g) is reduced to 18.88 mmHg, while the pressures of SO2(g) and O2(g) remain at 1 atm.
The value of ΔG for the reaction 2SO₂(g) + O₂(g) ⟶ 2SO₃(g) at 298.15 K, with the pressure of SO₃(g) reduced to 18.88 mmHg while the pressures of SO₂(g) and O₂(g) remain at 1 atm, can be calculated as follows:
To calculate ΔG, we need to use the equation ΔG = ΔG° + RT ln(Q), where ΔG° is the standard Gibbs free energy change, R is the gas constant, T is the temperature in Kelvin, and Q is the reaction quotient.
Given that the reaction is taking place under non-standard conditions, we need to calculate the reaction quotient (Q) using the partial pressures of the gases involved.
The reaction quotient (Q) is given by Q = (P(SO₃)²) / (P(SO₂)² * P(O₂)).
Using the given information, we have P(SO₃) = 18.88 mmHg and P(SO₂) = P(O₂) = 1 atm.
Substituting the values into the equation for Q and plugging in the appropriate values for R and T, we can calculate ΔG using the equation ΔG = ΔG° + RT ln(Q).
Note: To provide a numerical answer, the standard Gibbs free energy change (ΔG°) for the reaction at 298.15 K is required. Please provide that information, and I can proceed with the calculation.
learn more about Gibbs free energy here:
https://brainly.com/question/13318988
#SPJ11
The force of attrartion hetween a divalent cation and a divalent anion is 2.96×10 −8
N. If the ionic. radius of the cation is 0.086 nm, what is the anion radius? nm
The force of attraction between a divalent cation and a divalent anion is given as 2.96×10^-8 N. With the ionic radius of the cation provided as 0.086 nm, we need to determine the anion radius.
The force of attraction between ions can be expressed using Coulomb's law, which states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. In this case, the force of attraction between the divalent cation and divalent anion is given as 2.96×10^-8 N.
To find the anion radius, we need to consider the charges and distances involved. Since both the cation and anion are divalent, their charges cancel out, resulting in a net charge of zero. Therefore, the force of attraction is solely dependent on the distance between them.
By rearranging Coulomb's law equation and substituting the given force and cation radius, we can solve for the anion radius. The anion radius can be calculated using the equation: force = (k * charge_cation * charge_anion) / (distance^2).
To know more about Coulomb's law here: brainly.com/question/506926
#SPJ11
