Answer:
Industrial activity increases the emission of greenhouse gases in the atmosphere, especially carbon dioxide (CO2), and it negatively affects climate by increasing global warming.
Two actions to face the global warming:
1- To substitute the use of fossil fuels by alternative clean energy sources such as, for example, hydroelectric, geothermal, solar and wind energy resources.
2- The government's policies decided to develop electric cars and to stimulate healthy habits such as walking instead of the use of conventional fossil-fueled transport modes.
An alkali is able to "cancel" out an acid. What is the other word for "cancelling out the acid"? * a) neutralise b) overcome c) nullify d) become acidic
Answer:
the correct answers is "neutralize"
Explanation:
When an acid is related to a base or also called an alkali and they reach a pH of 7, this acid will be neutralized or it will be canceled as the question says.
This happens so it reaches an equilibrium between both compounds, where the solution medium where these two compounds are is NEITHER ACID NOR BASIC, that is why it is called NEUTRAL medium.
Whenever you read that the pH of a solution is balanced, a neutralized acid, or a ph7 it means that the solution is NEUTRAL.
Respiration occurs in the __________
Respiration occurs in the mitochondria
Answer:
mitochondria
Explanation:
Respiration happens in the cells of plants, animals and humans, mainly inside mitochondria.
Please answer number 5 ASAP
Answer: Hello mister i dont now your question
Explanation:
What is the total energy required to break all the bonds in 1 mol propanol,
C3H8O?
Answer:
The total energy to break all the bonds in 1 mole of 1-propanol, C₃H₈O, is 4411 kJ/mol
Explanation:
We note that propanol, C₃H₈O is also known as 1-propanol is written as follows;
CH₃CH₂CH₂OH which gives
CH₃-CH₂-CH₂-OH
Hence, the total number of bonds are;
C-H Bonds = 3 + 2 + 2 = 7
C-O Bonds = 1
O-H Bond = 1
C-C Bonds = 2
The bond energies are as follows;
C-H Bonds = 413 kJ/mol
C-O Bonds = 358 kJ/mol
O-H Bond = 468 kJ/mol
C-C Bonds = 347 kJ/mol
Energy required to break the bonds in 1-propanol is therefore;
C-H Bonds = 413 kJ/mol × 7 = 2,891 kJ/mol
C-O Bonds = 358 kJ/mol × 1 = 358 kJ/mol
O-H Bond = 468 kJ/mol × 1 = 468 kJ/mol
C-C Bonds = 347 kJ/mol × 2 = 694 kJ/mol
The total energy to break all the bonds in 1 mole of 1-propanol = 4411 kJ/mol.
what will happen if we burn carbon monoxide In a closed room??
Answer:
the carbon monoxide will release blue fumes
In which kingdom do all organisms have cells that lack a cell wall?
fungsi
plants
animals
bacteria
Answer:
The answer is animals
Explanation:
Plants and fungi have a cell wall, and although most bacteria lack a cell wall, the question is asking in which kingdom do ALL organisms lack a cell wall. Hope this helps.
Answer:Bacteria
Explanation:
Action and reaction forces are described by newtons what law of motion
According to Newton, whenever objects A and B interact with each other, they exert forces upon each other. ... These two forces are called action and reaction forces and are the subject of Newton's third law of motion. Formally stated, Newton's third law is: For every action, there is an equal and opposite reaction.
There are total three laws of newtons, first law of newtons, second law of newton and third law of newton. Therefore, action and reaction forces are described by newtons third law of motion.
What is newton's third law?Newton's first law is also called law of inertia. An object at rest remains at rest, and an object in motion remains in motion at constant speed and in a straight line unless acted on by an unbalanced force.
Third law states that for every action there is an equal and opposite reaction. Third law is applicable in many field of physics. The third law is applicable in the running of rockets. The third law is also used by swimmers during swimming in pool.
Therefore, action and reaction forces are described by newtons third law of motion.
To learn more about newton's law, here:
https://brainly.com/question/29768600
#SPJ6
Please help me with those questions please
Answer:
I know the answer to 5, i think
Explanation:
No, if both parents were left-handed, they would not have to be left-handedthis is a multiple choice question. one of the answer from the option given is correct.Could you please help!!My sister needs help but she doesn't trust me '_' why am i even saying this, no one asked
6.What are the main
sources of water pollution?
a) Plastic, paper, metal
b) Snail in water
c) Agriculture, industry and community
C.
i cant explain why..................
Energy is the ability to do work or produce heat.
True
False
Answer: true
Explanation: hope this helpes
Answer:
TRUE
Explanation:
power derived from the utilization of physical or chemical resources, especially to provide light and heat or to work machines.
Where do you find the molar mass of an element
Answer:
Mass of a given chemical element or compound divided by the amount of substance.
(g/mol)
Why is there a higher rate of skin cancer in Australia than in other parts of the world?
Answer:
Read below
Explanation:
Melanoma -- the most virulent form of skin cancer -- is caused by harmful ultraviolet light from the sun. Australia's proximity to Antarctica, where there is a hole in the ozone layer that filters out UV rays, also increases the risk.
Answer:
In Austrailia there is the hieghest rate of skin cancer because there is so much sunlight in Austrailia and there some people that have sensitive skin and they get skin cancer easily/ fast.
Explanation: This answer is correct because my teacher gave me this answer.
Hope this was helpful if not plz don't report my answer plz.
Which of the following contribute(s) to most of the mass of an atom?
O A) Protons and electrons
B) Protons only
C) Protons and neutrons
OD) Neutrons only
Answer:
C) protons and neutrons
Explanation:
im pretty sure it is c
A 10.0 g sample of an unknown liquid is vaporized at 120.0°C and 5.0 atm. The volume of the vapour is found to be 568.0 mL. The liquid is determined to be made up of 84.2% carbon and 15.8% hydrogen. What is the molecular formula for the liquid?
Answer:
C8H16
Explanation:
First thing to do here is to calculate the molar mass of the compound
Mathematically;
molar mass = mass/number of moles
we can calculate the number of moles using the ideal gas equation
Mathematically;
PV = nRT
n = PV/RT
where p is the pressure at 5 atm
V is the volume at 568 ml = 568/1000 = 0.568 L
R is the molar gas constant which is 0.0821
T is the temperature which is 120+ 273 = 393k
Inserting these values into the equation, we have
n = (5 * 0.568)/(0.0821 * 393)
n = 0.088 moles
So the molar mass = 10/0.088
= 114 g/mol
Now let’s go to the percentages
C = 84.2/12 = 7.016666666666667
H = 15.8/1 = 15.8
divide by the smallest
C = 7.016666666666667/7.016666666666667 = 1
H = 15.8/7.016666666666667 = 2 approximately
The empirical formula is CH2
So for the molecular formula, we have;
(12 + 2)n = 114
14n = 114
n = 114/14 = approximately 8
So the molecular formula of the liquid will be (CH2)n = C8H16
The mass of an object is measured in _____. liters meters degrees kilograms
D. Answer the following questions in one word or a single sentence.
1. The metal foil used for wrapping food is made up of which metal
2. Which metal is used in thermometers?
3. Which non-metal is essential for breathing?
4. What is the alloy of iron, nickel and chromium known as?
5. Name the gas released when metals react with acids.
Answer:
According to the numbers 1-5;Aluminium,Mercury,Oxygen,Stainless Steel,Hydrogen gas.
Explanation:
why should we store Phosphorus in water
The reason we should store phosphorous in water is because it will ignite on contact with air
An investigation involves determining which metal is better for making pots that will cook food faster.
Given the following chemical equation at equilibrium: H2(g) + I2(g) ↔2HI(g) + heat. If the temperature is raised, in what direction will the equilibrium shift?
Answer: The reaction will shift in left or backward direction.
Explanation:
Any change in the equilibrium is studied on the basis of Le-Chatelier's principle. This principle states that if there is any change in the variables of the reaction, the equilibrium will shift in the direction to minimize the effect.
For the given equation:
[tex]H_2(g)+I_2(g)\rightleftharpoons 2HI(g)+heat[/tex]
As the given reaction is exothermic as the heat is released in the reaction. When the temperature is raised , the reaction will shift in a direction where temperature is decreasing and that is the reverse reaction which is endothermic in nature.
Thus the reaction will shift in left or backward direction.
Which equation represents fermentation? 1. C2H4 + H2O → CH3CH2OH 2. C2H4 + HCl → CH3CH2Cl 3. C6H12O6 → 2CH3CH2OH + 2CO2 4. 2CH3CHO → C3H5CHO + H2O
Answer:
3. C6H12O6 → 2CH3CH2OH + 2CO2
Explanation:
In fermentation a catabolic process occurs, where an organic substance (C6H12O6) is transformed into a simpler one (CH3CH2OH), through incomplete oxidation, which does not require oxygen. Sugars are transformed into ethyl alcohol and carbon dioxide.
The equation C₆H₁₂O₆ → 2CH₃CH₂OH + 2CO₂ represents fermentation
What is Fermentation ?Fermentation is an enzyme catalyzed, metabolic process whereby organisms convert starch or sugar to alcohol or an acid anaerobically releasing energy.
In this process a large molecule is broken down to a smaller molecule.
Among the Equations given Equation 3
C₆H₁₂O₆ → 2CH₃CH₂OH + 2CO₂
represents fermentation due to two reasons
It is the process of breaking down of SugarIt is breaking down of a large molecule into smaller molecules.To know more about Fermentation
https://brainly.com/question/13050729
#SPJ5
What is solid carbon dioxide oxide
Answer:
dry ice
Explanation:
hope this helps
:)
Answer:
Dry Ice is the common name for solid carbon dioxide (CO2). It gets this name because it does not melt into a liquid when heated; instead, it changes directly into a gas (a process known as sublimation).
Explanation:
a solution of hydrochloric acid contains 1.5 moles of the solute in 2.0 liters of solution. calculate the molarity of this solution
Answer:
0.75 M
Explanation:
Molarity = moles of solute / liters of solution
so;
Molarity = [tex]\frac{1.5 Moles}{2.0 Liters}[/tex]
According to molar concentration, the molarity of this solution is 0.75 molar.
What is molar concentration?Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.
The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.
In terms of moles, it's formula is given as molar concentration= number of moles /volume of solution in liters.Substitution in formula gives, molarity= 1.5/2=0.75 M
Thus, the molarity of this solution is 0.75 molar.
Learn more about molar concentration,here:
https://brainly.com/question/15532279
#SPJ2
How many moles of gas are contained in a 60.0L cylinder at a pressure of 200.0 atm and a temperature of 25.0? A.(490.48 mol) B.(590.84 mol) C.(340.56 mol) D.(540.67 mol)
Answer: A. 490.48mol
Explanation:
Using the ideal gas equation; PV =nRT
where P = Presssure = 200 atm
V = Volume = 60L
n = Number of moles
R = Gas constant = 0.08206 L.atm/mol/K
T = Temperature = 25 °C + 273 = 298K
Make "n" the subject of the formular;
n = PV / RT
= 200 x 60 / 0.08206 x 298
= 490.73 mol, which is closest to option A. 490.48mol
What does the pH of a solution measure?
O A. Color
O B. Volume
O c. Temperature
O D. Acidity
Answer:
D is the correct answer acidity
Explanation:
pH is the logarithmic measurement of the H3O+-concentration in water solutions.
By definition: pH = -log[H3O+]
Example: [H3O+] = 1.0*10-7 mol/L in neutral, pure water (at 25oC), so
pH = -log(H3O+) = -log(1.0*10-7) = 7.0
2. Which change in oxidation number indicates
oxidation?
A) -1 to +2
C) -1 to - 2
B) +3 to +2
D) +2 to -3
Answer:
A)
Explanation:
Increasing of oxidation number shows that the process is oxidation(or losing of electrons).
-1 to +2, oxidation number is increased. This is an oxidation process.
-
A solution has a pH of 8.4. what is the H+ concentration of the solution?
A solution has a pH of 11. What is the H+ concentration of the solution? Is the solution an acid or base?
Your father goes to the store to buy cleaner to remove such deposits from your bathtub. He has a choice between a product containing lemon juice (H+ =10^-2.5M) and one containing vinegar (H+ = 10^ -3.3M) which product would you recommend he purchase and why?
[H+]=3.98x10^-9
[H+]=10^-pH=10^-8.4
[H+]=10^-11, base
[H+]=10^-pH=10^-11
A solution with a pH of more than 7 is basic.
Lemon juice because it is more acidic
pH of lemon juice: 2.5
pH of vinegar: 3.3
Since the pH of lemon juice is lower, it is more acidic and will be more effective at removing the basic deposits.
1. If the potassium hydrogen phthalate is not completely dry, how would it affect the reported molar concentration (molarity) of the NaOH solution in Part A? Explain.
The given question is incomplete. The complete question is as follows.
Pure potassiom hydrogen phthalate is used for standardization of the sodium hydroxide solution. Suppose that the potassium hydrogen phthalate is not completely dry. Will the reported molar concentration of the sodium hydroxide solution be too high, too low, or unaffected because of the moistness of the potassium hydrogen phthalate? Explain please.
Explanation:
When potassium hydrogen phthalate is not completely dry then it means there will be some water present in it. According to this, actual potassium hydrogen phthalate is diluted because of the presence of water molecules.
Hence, 1 mole of potassium hydrogen phthalate needs 1 mole of NaOH. And, at the equivalence point according to the concept of moles:
No. of moles of potassium hydrogen phthalate = No. of moles of NaOH
Also, the titration of potassium hydrogen phthalate concentration is less because of the presence of water then the number of moles of NaOH calculated will be less.
Thus, we can conclude that the molar concentration of the sodium hydroxide solution be too low.
This is how osmium appears in the periodic table.A purple box has O s at the center and 76 above. Below it says osmium and below that 190.23.
Rounded to the nearest whole number, how many neutrons, on average, are in an atom of osmium?
a76
b114
c 190
d266
Answer:
114
Explanation:
plz make me brainiest
An aluminum can holds 350 mL of gas at 0 C and 1.0 atm. what is the new volume if the can is heated to 10 C and the pressure inside the can rises to 75 atm?
Answer:
Final volume of the gas is 4.837mL
Explanation:
Initial volume (V1) = 350mL = 0.35L
Initial temperature (T1) = 0°C = (0 + 273.15)k = 273.15k
Initial pressure (P1) = 1.0atm
Final volume (V2) = ?
Final temperature (T2) = 10°C = (10 + 273.15)k = 283.15K
Final pressure (P2) = 75atm
To solve this question, we'll have to use combined gas equation which is the combination of all gas law I.e Charle's laws, Boyle's law, Pressure law etc.
According to combined gas equation,
(P1 × V1) / T1 = (P2 × V2) / T2
Make V2 the subject of formula,
V2 = (P1 × V1 × T2) / (P2 × T1)
V2 = (1.0 × 0.35 × 283.15) / (75 × 273.15)
V2 = 99.1025 / 20,486.25
V2 = 0.004837L
V2 = 4.837mL
The final volume of the gas is 4.837mL
Answer:
4.84mL
Explanation:
Step 1:
Data obtained from the question. This include the following:
Initial volume (V1) = 350mL
Initial temperature (T1) = 0°C
Initial pressure (P1) = 1atm
Final temperature (T2) = 10°C
Final pressure (P2) = 75atm
Final volume (V2) =...?
Step 2:
Conversion of celsius temperature to Kelvin temperature.
This can be achieved by using the formula below:
T(K) = T (°C) + 273
Initial temperature (T1) = 0°C
Initial temperature (T1) = 0°C + 273 = 273K
Final temperature (T2) = 10°C
Final temperature (T2) = 10°C + 273 = 283K
Step 3:
Determination of the new volume.
The new volume can be obtained by using the general gas equation as follow:
P1V1/T1 = P2V2/T2
1 x 350/273 = 75 x V2/283
Cross multiply
273 x 75 x V2 = 1 x 350 x 283
Divide both side by 273 x 75
V2 = (1 x 350 x 283) / (273 x 75)
V2 = 4.84mL
Therefore, the new volume is 4.84mL
What is the function of these organelles?
endoplasmic reticulum:
Golgi body:
mitochondrion:
ribosome
Answer:
endoplasmic reticulum:
✔ helps in the production and movement of materials
Golgi body:
✔ packages and distributes materials in and out of cell
mitochondrion:
✔ supplies energy that the cell uses
ribosome:
✔ produces proteins for the cell
Explanation:
I did it on Edge
The function of endoplasmic reticulum is it helps in production and movement of a material.
What is endoplasmic reticulum?Endoplasmic reticulum is defined as a network of membranous tubules present within the cytoplasm of a eukaryotic cell.
It is one of the important organ of human body system which helps us in production and movement of material from one body part to another.
Golgi body helps in packaging and distribution of material in and out of cells.
Mitochondrion supply the energy to the cell. It is called as a power house of cell.
Ribosome helps to produce protein for the cell. It is called as protein factory.
Thus, the function of endoplasmic reticulum is it helps in production and movement of a material.
To learn more about endoplasmic reticulum, refer to the link below:
https://brainly.com/question/1311891
#SPJ2
