Select the correct answer from
each drop-down menu.
What causes O atoms to form covalent bonds?
In a covalent bond, two atoms are held together by the attraction between
bonds that an atom can form depends on the number of
The number of covalent
in the atom.

Answer:

Density is defined as the mass of a substance per unit volume, so we can use the given mass and volume to calculate the density of osmium.

Density = mass / volume

Substituting the given values, we get:

Density = 2.72 g / 0.121 m^3

Simplifying, we get:

Density = 22.48 g/m^3

Therefore, the density of osmium is 22.48 g/m^3.

Explanation:

Answer:

22,426 g/m³.

Explanation:

Density is defined as mass per unit volume. To calculate the density of osmium, we need to divide its mass by its volume:

Density = Mass / Volume = 2.72 g / (0.121 cm³ * (1 m³ / 10^6 cm³))

= 2.72 g / 0.121 * 10^-6 m³ = 2.72 * 10^6 g / 0.121 m³ = 22,426 g/m³

So, the density of osmium is approximately 22,426 g/m³.

If the researcher obtains a z-score that is greater than 1.645, she can reject the null hypothesis at the 0.05 level of significance and conclude that the alternative hypothesis is supported.

To determine the critical value of z for a one-tailed hypothesis test at the 0.05 significance level (or alpha level), we need to use a z-table or statistical software.

For a one-tailed test with a 0.05 significance level, look for the z-score that corresponds to the 95th percentile of the standard normal distribution. Find the z-score that separates the bottom 95% of the distribution from the top 5%.

Using a z-table, find that z-score for 95th percentile is approximately 1.645.

To know more about the null hypothesis, here

brainly.com/question/28920252

#SPJ4

Sophie is pushing her bike up a hill with 10N if she increases her force to 12N, then there will be decrease the bike's mass. Therefore, the correct option is option C.

A force is indeed an effect in physics that may modify the velocity of an item. A force can cause a mass object to change its velocity (e.g., moving from rest), i.e., to accelerate.

Intuitively, force may be characterized as a push or even a pull. A force is a vector quantity since it has both direction and magnitude. It really is measured in newtons, the SI unit of mass (N). Sophie is pushing her bike up a hill with 10N if she increases her force to 12N, then there will be decrease the bike's mass.

Therefore, the correct option is option C.

To know more about force, here:

https://brainly.com/question/13014979

#SPJ1

Answer:

[tex]\huge\boxed{\sf n = 1.5\ mol}[/tex]

Explanation:

Mass = m = 39 g

Molar mass = M = 7 + 19 = 26 g/mol

No. of moles = n = ?

[tex]\displaystyle n = \frac{m}{M}[/tex]

Put the given data in the above formula.

n = 39/26

[tex]\rule[225]{225}{2}[/tex]

Answer:it is 5 square c

Explanation:

because c is the best

Answer:

C4H8O4

Explanation:

The empirical formula of a compound can be determined from its elemental composition. To determine the empirical formula, we first need to convert the mass of each element to moles, and then divide by the smallest number of moles of any element to obtain the mole ratio.

From the combustion analysis, the number of moles of CO₂ produced is 11.88 g / 44.01 g/mol = 0.2694 mol. The number of moles of H₂O produced is 3.891 g / 18.015 g/mol = 0.2169 mol.

Next, we convert the carbon and hydrogen present in the compound to moles by dividing the mass of each element by its atomic mass:

C = (7.132 g - 11.88 g - 3.891 g) / 12.01 g/mol = 0.2694 mol

H = 2 * 0.2169 mol = 0.4338 mol

Now, we divide each number of moles by the smallest number of moles (0.2694 mol) to obtain the mole ratio:

C = 0.2694 mol / 0.2694 mol = 1

H = 0.4338 mol / 0.2694 mol = 1.6

O = 0.2694 mol / 0.2694 mol = 1

The empirical formula of the compound is therefore C1H1.6O1, which can be simplified to C1H2O.

To determine the molecular formula, we use the molar mass of the compound, 132.1 g/mol, and compare it to the molar mass calculated from the empirical formula. The molar mass of C1H2O is 12.01 g/mol + 2 * 1.01 g/mol + 16.00 g/mol = 30.03 g/mol. To find the molecular formula, we divide the molar mass of the compound by the molar mass of the empirical formula and multiply each element in the empirical formula by this number:

132.1 g/mol / 30.03 g/mol = 4.40

C = 1 * 4.40 = 4.40

H = 2 * 4.40 = 8.80

O = 1 * 4.40 = 4.40

The molecular formula of the compound is therefore C4H8O4.

Aɳʂɯҽɾҽԃ Ⴆყ ɠσԃKEY ꦿ

Answer:

11 * CH₂ = C₁₁H₂₂

Explanation:

The empirical formula of a compound can be determined by finding the ratio of the number of atoms of each element present in the compound. To find the empirical formula of this organic compound, we need to calculate the number of moles of each element present in the sample.

First, we find the number of moles of carbon by dividing the mass of CO₂ produced by the molar mass of CO₂:

11.88 g CO₂ / 44.01 g/mol CO₂ = 0.269 mol C

Next, we find the number of moles of hydrogen by dividing the mass of H₂O produced by the molar mass of H₂O:

3.891 g H₂O / 18.02 g/mol H₂O = 0.216 mol H

To find the empirical formula, we divide the number of moles of each element by the smallest number of moles calculated:

0.269 mol C / 0.216 mol H = 1.244

0.216 mol H / 0.216 mol H = 1

So the empirical formula of the organic compound is CH₂.

The molecular formula of a compound is a multiple of its empirical formula, with the multiple determined by the molar mass. To find the molecular formula of this organic compound, we divide the molar mass of the sample by the molar mass of the empirical formula:

132.1 g/mol / (12.01 g/mol + 2 * 1.01 g/mol) = 11

So the molecular formula of the organic compound is 11 * CH₂ = C₁₁H₂₂.



ALLEN

If a reaction vessel is charged with 0.50 atm of A and 0.130 atm of B. Once the reaction reaches equilibrium,  the equilibrium partial pressure of B is:  5.79 atm.

To calculate the equilibrium partial pressure of B, we need to use the expression for an equilibrium constant (Kp). The equation for Kp for a reaction of the form A (g) ⇌ 2 B (g) is given by:

Kp = (P_B^2) / (P_A)

Where:

P_A and P_B are the equilibrium partial pressures of A and B, respectively.

Given that the initial pressures of A and B are 0.50 atm and 0.130 atm, respectively, and the value of Kp is 67.2, we can use the above equation to calculate the equilibrium partial pressure of B:

Kp = (P_B^2) / (P_A) = 67.2

P_A = 0.50 atm

Therefore,

(P_B^2) / (0.50 atm) = 67.2

P_B^2 = 67.2 * 0.50 atm = 33.6 atm

P_B = √(33.6 atm) = 5.79 atm

So, the equilibrium partial pressure of B is approximately 5.79 atm.

Learn more about equilibrium partial pressure of B here:https://brainly.com/question/14001401

#SPJ1

1.4108g of copper will be produced.

Define a displacement reaction.

When a less reactive element is pushed out of a compound that also contains a more reactive ingredient, the result is a displacement reaction. The less reactive element is now pure and left alone following a displacement reaction.

When an atom or group of atoms in a molecule are replaced by another atom, this is referred to as a displacement reaction. A + B + C = A + B + C. When A is more reactive than B, the aforementioned equation holds true.

2Al + 3CuCl2 → 3Cu + 2AlCl3.

Number of moles of Al  = 0.4g/27g

                                       = 0.0148moles

2 moles of Al will give 3 moles of Cu.

So, 0,0148moles Al will give 3/2 *0.0148 moles of copper i.e. 0.022moles

Mass of Cu will be 0.022*63.55 i.e. 1.4108g

To learn more about displacement reaction use link below:

https://brainly.com/question/26413416

#SPJ1

B. The single O-H bond in water is very polar, but glycerol has three O-H bonds, which form a network of attractive forces.

Glycerol is a colorless, odorless, sweet-tasting, viscous liquid that is widely used in pharmaceutical formulations. It is a sugar alcohol, which is a type of carbohydrate that is not fully metabolized by the body. Glycerol is a by-product of the hydrolysis of fats and oils. It is used in various industries, such as cosmetics, food, medical and pharmaceuticals, and it is also used as an anti-freeze and a solvent. It is used in skin care products and as an emollient, and it helps to retain moisture in the skin.

This network of attractive forces causes the particles to stick together more, making it harder for them to move, and thus increasing the viscosity.

To learn more about glycerol
https://brainly.com/question/23503113
#SPJ1

The stoichiometry can be used to obtain the parameters about a reaction.

The question is incomplete but I will show you how to use stoichiometry to obtain the parameters that concern a reaction.

Here are the steps to use stoichiometry in a chemical reaction:

Write a balanced chemical equation: The first step is to write a balanced equation for the chemical reaction, which shows the correct number of atoms of each element involved in the reaction.

Determine the molar ratio: From the balanced equation, determine the molar ratio of the reactants and products by counting the number of moles of each species. This will give you the conversion factor between the reactants and products.

Choose a reactant or product to work with: Choose the reactant or product that you have information about, either the amount or the concentration.

Calculate the number of moles: Using the amount or concentration of the reactant or product, calculate the number of moles of that species.

Use the molar ratio to calculate the other species: Using the molar ratio determined in step 2, calculate the number of moles of the other reactants or products.

Convert moles to the desired units: Finally, convert the number of moles to the desired units, such as mass, volume, or number of particles.

Learn more about stoichiometry:https://brainly.com/question/30215297

#SPJ1

The part that js designated as the surrounding here is  Inside the famous hood

In this scenario, the system is the chemical reaction being performed by the chemist with the various glass containers and liquids. The surroundings are everything else outside of this system, including the fume hood and the outside of the building.

The correct answer that is the designated surrounding here would be the fume hood.

Read more on chemical reactions here:https://brainly.com/question/11231920

#SPJ1

A chemist is performing a chemical reaction under a fume hood. The chemist has a set of beakers, flasks, and tubes set up under the fume hood, with various liquids being combined inside the glass containers. The fume hood is turned on in order to withdraw any toxic gases and expel them outside the building.

Which part of this system is designated as the surroundings

A. Outside of the building

B. Liquid contents of the glass containers

C. Inside the famous hood

D. The glass containers

This statement is referring to a laboratory experiment in molecular biology or genetics where DNA has been labeled with the fluorescent dye Cy5, which emits a red signal when excited by light. The experiment has revealed that the labeled DNA (in this case, the test DNA) is present along the short arm of chromosome 3. This information can be used to study the location of specific genes or other genetic elements on the chromosome. The use of the reference DNA allows for the comparison of the test DNA to a known and well-characterized reference, which can provide additional information about the identity and location of the test DNA.

Answer:

This labeling information suggests that the test DNA, which was labeled with the dye Cy5 (red), is present along the short arm of chromosome 3 in the reference DNA sample. The bright red signal indicates a high concentration of the labeled test DNA in that region, which could indicate that the test DNA is interacting with or mapping to that specific location on chromosome 3. This information can be used in various genomic studies, such as genome mapping, gene expression analysis, and chromatin analysis, to better understand the distribution and function of specific DNA sequences in the genome.

Explanation:

Just tell me if you kinda confuse


ALLEN

The energy traveled from you to your friend through the medium of the air. When you moved your arm, the energy created a vibration in the air which then propagated in all directions. As the wave traveled, it passed through the air and eventually reached your friend, carrying energy with it.

Energy is the ability to do work or cause change. It is the capacity to cause motion, to create heat, to transform matter, or to generate electricity. It can come from a variety of sources, such as the sun, wind, water, fossil fuels, nuclear energy, and other renewable sources. Energy can also be stored in batteries or fuel cells. It is a fundamental component of the universe and is essential for life. All life forms require energy to survive and grow, and energy is also necessary for the development of technology. Without energy, the world would not function as it does today.

To learn more about energy
https://brainly.com/question/19666326
#SPJ1

Answer The reaction shown below is a chemical reaction between aqueous calcium hydroxide (Ca(OH)2) and aqueous hydrochloric acid (HCl):

Explanation:

Ca(OH)2(aq) + HCl(aq) -> CaCl2 + H2O

This reaction is an example of a neutralization reaction. Neutralization reactions occur when an acid reacts with a base to produce a salt and water. In this reaction, the hydrogen ions from the hydrochloric acid react with the hydroxide ions from the calcium hydroxide to produce calcium chloride (CaCl2) and water (H2O). The reaction results in the neutralization of both the acid and the base, hence the name "neutralization reaction."

Answer:

no answer

Explanation:

I wish I could help you, but go to your text book for reference

It is a greenhouse gas. The greenhouse effect is caused by the absorption by the surface of the Earth and re-absorption by the atmosphere of the greenhouse gases (CH₄, CO₂, NO, CFCs ) in the environment.

What is the greenhouse effect?

The greenhouse effect is a natural process by which certain gases in the Earth's atmosphere, known as greenhouse gases, trap heat from the sun and prevent it from escaping into space. The greenhouse gases, which include carbon dioxide, methane, water vapor, and others, act like a blanket around the Earth, absorbing and re-emitting infrared radiation that would otherwise be lost to space. This process helps to keep the Earth's temperature within a range that is suitable for supporting life. However, human activities such as burning fossil fuels have increased the concentration of greenhouse gases in the atmosphere, leading to an enhanced greenhouse effect and causing the Earth's temperature to rise, a phenomenon known as global warming.

To know more about greenhouse effect, visit:

https://brainly.com/question/13706708

#SPJ1

The complete question and the labelled answer respectively, is as follows:

Answer:

b. 500 m/s

Explanation:

If you use 0.600 mol of gas, the gas will have a new volume of 13.2 L.

The amount of space a three-dimensional item takes up is measured by its volume. Usually, it is expressed in terms of liters (L), cubic meters (m3), or cubic feet (ft3).

The volume of the gas is directly proportional to the amount of gas (measured in moles) present, presuming constant temperature and pressure. Avogadro's Law describes this connection.

This law allows us to establish a proportion:

Amount1 / Volume1 = Volume2 / Amount2

If Volume2 is the new volume we wish to find, Volume1 is the initial volume, Amount1 is the initial amount of gas (in moles), and Volume2 is the new volume (in moles).

By entering the specified values, we obtain:

Volume2 / 0.600 mol = 1.1 L / 0.05 mol

For Volume 2, we solve as follows:

Volume2 = 1.1 liters / 0.05 mol / 0.600 mol = 13.2 liters

Therefore, if you use 0.600 mol of gas, the new volume of the gas will be 13.2 L.

To know more about volume, visit:

https://brainly.com/question/28058531

#SPJ1

Answer:

The Perkin reaction is an organic chemical reaction that converts an alpha-naphthol and a sodium salt of an aldehyde into a substituted naphthol. The mechanism of the Perkin reaction is a type of electrophilic aromatic substitution reaction.

In the first step, the sodium salt of the aldehyde reacts with sodium hydroxide to form a sodium alkoxide. The sodium alkoxide then acts as a nucleophile and attacks the naphthol ring, leading to the formation of an intermediate that contains a tetrahedral carbon atom.

In the second step, the intermediate undergoes an elimination reaction to form an aromatic compound with a hydroxyl group in place of the aldehyde. This reaction is facilitated by the presence of an electron-withdrawing group in the para position of the ring, which stabilizes the intermediate and promotes the elimination reaction.

In conclusion, the various components of the Perkin reaction play different roles in its mechanism. The sodium salt of the aldehyde acts as a source of nucleophilic attack, while sodium hydroxide is used to generate the nucleophile. The naphthol ring acts as an electrophilic aromatic system, and the electron-withdrawing group in the para position helps to stabilize the intermediate and promote the elimination reaction.

Explanation:

ALLEN

Answer:

reaction alpha baphtil and sodium salt

Explanation:

The relationship between temperature and gas motion is a direct relationship.

The kinetic energy of gas particles is proportional to the square of their velocity, so as the temperature of a gas increases, the velocity of its particles also increases. This means that the motion of the gases becomes more energetic, causing the particles to collide more frequently and with greater force. These collisions result in an increase in pressure and volume, which are two other characteristics that are related to the temperature and motion of gases.

In summary, the relationship between temperature and the motion of gases can be explained by the kinetic theory of gases, which states that the temperature of a gas is directly proportional to the average kinetic energy of its particles. As the temperature of a gas increases, its particles move faster, resulting in more energetic collisions and changes in pressure and volume.

Learn more about temperature:https://brainly.com/question/11464844

#SPJ1

Answer:

27 moles of sulfuric acid are produced.

Explanation:

The equation for the reaction between nitric acid (HNO3) and sulfuric acid (H2SO4) to form nitration sulfate (HNO3) and water (H2O) is:

2 HNO3 + H2SO4 → H2SO4 + 2 H2O

For every 2 moles of nitric acid that react, 1 mole of sulfuric acid is produced. So, when 54 moles of nitric acid are consumed, 54/2 = 27 moles of sulfuric acid are produced.

The heat of fusion for water is 6.01 kJ/mole and the heat of vaporization for water is 40.7 kJ/ mol,7.5125 KJ energy is needed to melt 22.5 grams of ice.

The enthalpy of fusion is also known as heat of fusion, is the change in its enthalpy resulting from supplying energy, typically heat, to a specific quantity of the substance to alter its state from a solid to a liquid, at constant pressure.

Given:

The heat of fusion for water = 6.01 kJ/mole

The heat of vaporization for water = 40.7 kJ/ mol

Energy = ?

Number of moles of ice = mass / molar mass

Number of moles of ice = 22.5 / 18

= 1.25 moles

Q = number of moles × Hf

= 1.25 × 6.01

= 7.5125 KJ

Thus, 7.5125 KJ energy is needed to melt 22.5 grams of ice.

To learn more about the heat of fusion, follow the link;

https://brainly.com/question/14053504

#SPJ1

The density is described below, the relationship of density and temperature.

What is density ?

How compact or concentrated anything is is determined by its density. Take two boxes as an illustration, one huge and one little. They both weigh the same, though. This indicates that the small box is more dense than the huge box. Additionally, density conveys how crowded or dense something is.

What is temperature?

In the International System of Units (SI), the kelvin serves as the fundamental measure of temperature. K serves as its symbol. For practical purposes, it is frequently convenient to use the Celsius scale, where 0 °C nearly resembles the freezing point of water and 100 °C signifies the boiling point of water at sea level.

Density = mass / volume

There is no change in mass with temperature.

Volume increases with increases in temperature because kinetic energy of molecules increases with temperature. so the molecules are move away from each other.

So, since density is inversely proportional to volume.

As temperature increases, volume increases thus density increases.

Therefore, The density is described above, the relationship of density and temperature.

Learn more about density from the given link.

https://brainly.com/question/1354972

#SPJ1

Answer:

46.726 amu

Explanation:

The total abundance of the two isotopes of antimony is 100%, so the abundance of the other isotope is 100% - 61.30% = 38.70%.

Since the atomic weight of antimony is 121.957 amu, the total mass of the two isotopes is 121.957 amu. The mass of the second isotope can be calculated as follows:

mass of the second isotope = (total mass of the two isotopes) * (abundance of the second isotope) / 100

mass of the second isotope = 121.957 amu * 38.70% / 100

mass of the second isotope = 46.726 amu

So the mass of the other isotope is 46.726 amu.

Triglycerides, also known as triacylglycerols, are composed of a glycerol backbone attached to three fatty acid chains.

The fatty acids are esterified to the three hydroxyl groups of the glycerol backbone, forming a molecule with three fatty acid chains bound to a glycerol molecule. Triglycerides are the main constituents of natural fats and oils and are the most common form of stored energy in animals.

Triglycerides are the main type of fat (lipid) found in the body and in food. They are composed of three fatty acids attached to a glycerol backbone. Triglycerides are an important source of energy for the body and are stored in adipose tissue (body fat) for later use. They can also be found in the bloodstream, where they can contribute to the formation of plaque in the arteries, increasing the risk of heart disease. Triglycerides are commonly found in foods that are high in fat, such as oils, butter, and meats, as well as in some plant-based foods, such as nuts and seeds.

To learn more about Triglycerides :

https://brainly.com/question/13840067

#SPJ4

The group that would most benefit from the claim is people who sell coffee with caffeine.

Caffeine increases mental alertness, making it ideal for activities related to the workplace because it makes a person more attentive, aware of their surroundings, and better able to keep up with tasks.

Caffeine  enhances motor coordination, which is the capacity to coordinate various body parts to produce complicated movements. Among those who are active, the capacity to enhance motor coordination may increase need for caffeine.

The organizations who would gain most from the claim are the dealers in caffeinated items, including; based on the link of caffeine with benefits that are desired by active people (working people who earn income).

Therefore, option A is correct.

Learn more about claim at:

https://brainly.com/question/2748145

#SPJ1

substances, such as aluminum, copper is measured in J/mole C rather than J/gC. 18.0 g/mole times 4.18 J/gC results in 75.2 J/moleC.

The key is to always keep in mind that the specific heat of copper is lower than that of iron. You need to keep in mind that the heat of metal is higher than the heat capacity of copper. As a result, we can state that Q is identical to Late Mr. Delta T.

The temperature of the water equals 4.184 J/g-K due to the fact that there will be 4.184 megawatts in a calorie. Another way to define the ease that an item receives or loses heat.

To know more about copper visit :

https://brainly.com/question/13677872

#SPJ1

According to molar concentration, 0.055 ×10[tex]^-3[/tex] mg of sodium sulfide are needed to completely react with 4.80 mL of a 0.0900 M aqueous solution of cadmium nitrate, to form a precipitate of CdS.

Molar concentration is defined as a measure by which concentration of chemical substances present in a solution are determined. It is defined in particular reference to solute concentration in a solution . Most commonly used unit for molar concentration is moles/liter.

The molar concentration depends on change in volume of the solution which is mainly due to thermal expansion. Molar concentration is calculated by the formula, molar concentration=mass/ molar mass ×1/volume of solution in liters.

mass of sodium sulfide is calculated as, 0.09×236.42×0.0048=0.102 g.Now, according to stoichiometry where 78.04 g Na₂S gives 144.46 g CdS ,for 0.102 g  sodium sulfide 78.04×0.102/144.46=0.055 g or 0.055×10[tex]^-3[/tex] mg.

Learn more about molar concentration,here:

https://brainly.com/question/21841645

#SPJ1

Belief that the color red is a hopeful color or that it is associated with death are examples of cultural contexts. That is option B.

Cultural contexts can be defined as the belief, ideas and norms that are shared by a group of people which is usually passed from generation to generation.

There are usually four aspects of cultural context are setting, lifestyle, purpose, and falling action.

The belief that colour red is associated with death is related to culture because red is associated with the colour of blood.

Learn more about culture here:

https://brainly.com/question/25010777

#SPJ1

Explanation:

Answer:

11B

Explanation:

When 10B absorbs a neutron, it becomes the unstable isotope 11B, which quickly undergoes beta decay to form the stable isotope 11C. In this process, a neutron in the 10B nucleus is transformed into a proton, which increases the atomic number of the isotope from 5 to 6. The beta decay of 11B involves the emission of an electron (beta particle), which is produced when a neutron in the nucleus decays into a proton and an electron.