Sodium chlorate decomposes into sodium chloride and oxygen gas as seen in the equation below.

­­2NaClO3­ --> 2NaCl +3O2

How many moles of O2 were produced by 4 moles of NaClO3­? Round your answer to the nearest whole number.

Answer:

12.0 grams of hydrogen would produce 12.0 grams of water.

Explanation:

The reaction between hydrogen and oxygen to form water can be represented as follows:

2H2(g) + O2(g) -> 2H2O(l)

From the equation, it can be seen that for every 2 grams of hydrogen, 1 gram of oxygen is required to produce 2 grams of water. Therefore, if 12.0 grams of hydrogen reacts with oxygen, 12.0/2 = 6.0 grams of oxygen would be required. This amount of oxygen would produce 2 * 6.0 = 12.0 grams of water.

Answer:

Explanation:

the grams of water produced= 44 grames  

Since what we have is an alpha decay, the missing component is 234/90 Th

Alpha decay is a type of radioactive decay in which an atomic nucleus emits an alpha particle, which is a helium nucleus consisting of two protons and two neutrons. During alpha decay, the atomic number of the parent nucleus decreases by two, and the mass number decreases by four.

Apha particles can be stopped by a thin layer of material such as paper or skin, and they do not penetrate very far into matter.

Learn more about  Alpha decay:https://brainly.com/question/27870937

#SPJ1

There are two ways to measure pH: calorimetrically with indicator fluids or sheets and electrochemically with electrodes and a millivoltmeter for greater accuracy (pH meter).

The pH scale is used to indicate how basic or acidic a solution is (pH stands for potential of hydrogen). The pH scale gauges a substance's acidity or basicity. It falls between 0 and 14. Seven is the neutral pH.

The pH scale is a useful tool for illustrating how basic or acidic a solution is. By using the negative logarithm of the hydronium ion concentration, or pH = -log[H3O+], we may determine the pH of a solution.

To know more about pH visit:-

https://brainly.com/question/2288405

#SPJ1

Answer: here’s mine :)

Answer:

The Speed squared is equal to the Kinetic Energy

Explanation:

1^{2}  = 1

2^{2} = 4

3^{2} = 9

4^{2} = 16

Therefore the data on the table proves that the Speed squared is equal to the Kinetic Energy

2Kg is the mass of the object. Therefore, the correct option is option B among all the given options.

Acceleration is the rate at which velocity varies over time, both in terms of speed and direction. A point or object travelling in a straight path called accelerated if it accelerates or decelerates.

Regardless of whether the speed remains constant, movement on a circle becomes accelerated because of direction is always changing. Both redistribution to acceleration in all other types of motion.

F (N)    Acceleration (m/s/s)

0            0

4            2

8            4

12          6

for the set 4,

F =ma

m = F/a

4/2=2

8/4= 2

12/6= 2Kg

Therefore, the correct option is option B.

To learn more about Acceleration, here:

https://brainly.com/question/24341162

#SPJ9

Your question is incomplete but most probably your full question was,

This table shows the relationship between the force on an object and the object's resulting acceleration.

F (N)    Acceleration (m/s/s)

0            0

4            2

8            4

12          6

What is mass of the object?

A) 1Kg

B) 2Kg

C) 3Kg

D) 4Kg

When water is carefully dropped onto the surface of a penny, it can form a dome before spilling over the small lip around the penny's perimeter. Rubbing alcohol can also accumulate, but it will spill before forming a well-rounded dome.

Cohesive forces are powerful, but not invincible. The force of gravity on the water molecules will eventually overcome the cohesive forces as a water drop builds up and out, usually bulging over the sides of the penny. The "skin" will rupture, allowing all the water to escape.

When the drops of water you add to the penny reach the penny's edge, the cohesion and surface tension of water become apparent.

Thus, When the water reaches the edge, a bubble or dome of water begins to form on top of the penny.

To learn more about the water to spill over the penny, follow the link;

https://brainly.com/question/29159399

#SPJ1

The sugars we have been discussing are made directly through a series of reactions in the Calvin Cycle, which uses CO2 as a starting input.

Recall that under thermodynamic laws, building complex molecules requires the input of energy in the form of sunlight. That energy in photosynthesis comes from the Light Reaction. Through a series of reactions in the Light Reaction, light energy is transformed into energy that is in the form of ATP and high-energy electrons carried by NADPH. In the Light Reaction, H2O is used and outputs as O2. In the Calvin Cycle, ATP and NADPH enter and output as ADP and NADP. These processes work together to produce glucose and other sugars that are essential for life. The sugars we have been discussing are made directly through a series of reactions in the Calvin Cycle, which uses CO2 as a starting input.

Learn more about Calvin Cycle :

https://brainly.com/question/17600594

#SPJ4

If 45g of salt reacts with silver nitrate. Therefore,  110.24g is the mass of silver chloride will be produced.

Sodium chloride, also known as salt (though sea salt contains additional chemical salts), is just an ionic substance with both the chemical symbol NaCl, signifying a 1:1 ratio of chloride and sodium ions.

One mole of sodium chloride, NaCl, creates one mole of silver chloride, AgCl, according to the balanced reaction. NaCl has a molar mass of 58.5 g and AgCl has a molar mass of 143.2 g/mol.

As a result, 58.5 g of sodium chloride yields 143.2 g of silver chloride. As a result, the mass of silver chloride generated by 45 g of sodium chloride is as follows:

AgCl mass = (143.2 g 45 g)/58.5 g

               = 110.24 g

Therefore,  110.24g is the mass of silver chloride will be produced.

To know more about sodium chloride, here:

https://brainly.com/question/18069204

#SPJ1

An adaptation that is useful for living in one type of environment may be useless in a different environment. Organisms must live in a place that has the conditions they need to survive. Organisms generally have adaptations that allow them to survive in one particular enviroment.

The expression adaptations in a particular enviroment mean that these traits are only advantageous regarding the enviroment.

Therefore, with this data, we can see that the adaptations in a particular enviroment can be detrimental or beneficial depending on the enviroment.

Learn more about adaptative features here:

https://brainly.com/question/29594

#SPJ1

The student needs to weigh out 18.055 g of chromium(II) nitrate.

What is mass?

Mass is a measure of the amount of matter in an object, typically measured in units of kilograms (kg), grams (g), or milligrams (mg). It is a scalar quantity, meaning it has magnitude but no direction.

(a) To prepare a 0.235 M solution of chromium(II) nitrate in 500 mL of water, we need to calculate the amount of chromium(II) nitrate that needs to be weighed out.

The formula weight of chromium(II) nitrate is Cr(NO3)2. Using the periodic table, we can find the atomic weights of the elements in this compound:

Cr: 52

N: 14

O: 16

So, the formula weight of chromium(II) nitrate is:

52 + 2(14 + 3(16)) = 154 g/mol

To prepare a 0.235 M solution, we need 0.235 moles of chromium(II) nitrate in 1 liter (1000 mL) of solution. In 500 mL of solution, we need:

0.235 moles/L x 0.5 L = 0.1175 moles

The mass of chromium(II) nitrate that contains 0.1175 moles can be calculated using the formula:

mass = moles x formula weight

mass = 0.1175 mol x 154 g/mol = 18.055 g

Therefore, the student needs to weigh out 18.055 g of chromium(II) nitrate.

(b) Option C, "Add a small amount of water to the volumetric flask and swirl until the salt sample has dissolved," would not be an expected step in the procedure used by the student. When preparing a solution in a volumetric flask, it is important to first add a portion of the solvent (in this case, water) to the flask, and then add the solute (chromium(II) nitrate) and mix it thoroughly to dissolve it. This is to ensure that the final volume of the solution is accurate, since the volumetric flask is calibrated to contain a specific volume of liquid only when filled to the mark after adding the solute.

To learn more about mass:

https://brainly.com/question/1838164

#SPJ1

The term mole concept is used here to determine the moles of oxygen gas produced. When 6.50 moles of Calcium oxide decomposes, 3.25 moles of oxygen gas is produced.

One mole of a substance is that amount of it which contains as many particles or entities as there are atoms in exactly 12 g of carbon-12.

The given reaction is:

2 CaO → 2 Ca + O2

Here 2 moles of calcium oxide decomposes to give 2 moles of calcium and 1 mole of oxygen. So 6.50 moles CaO gives:

6.50 × 1 mol O₂ / 2 mol CaO = 3.25 mol O₂

Thus 3.25 mol O₂ is produced.

To know more about mole, visit;

https://brainly.com/question/19730733

#SPJ9

In precipitation reaction, two reactants in aqueous solution form an insoluble product, or precipitate, that separates from the solution.

What do you mean by precipitation reaction?

Precipitation reactions are chemical reactions in which two or more aqueous solutions react to produce an insoluble product, known as a precipitate. Precipitation reactions can occur between two ionic compounds, or between an ionic compound and a molecular compound.

The reaction products would be:

LiCl + AgOH → LiOH + AgCl

NaI + AgNO3 → AgI + NaNO3

Ca(OH)2 + K2CO3 → KOH + CaCO3

The products of these reactions are the insoluble compound formed, often referred to as the precipitate, and the two aqueous solutions that remain after the reaction has taken place. Examples of common precipitation reactions include those involving two salts, such as silver nitrate and sodium chloride, which form silver chloride, and the reaction between lead nitrate and potassium iodide, which form lead iodide.

To know more about precipitation reaction,

https://brainly.com/question/13016165

#SPJ1

The volume of the oxygen cylinder at a pressure of 3.0 atm is 11.25 L. The closest answer choice to this value is option C. 11 L.

We can use the ideal gas law, PV = nRT, to solve this problem. Here, P is the pressure, V is the volume, n is the number of moles of gas, R is the ideal gas constant, and T is the temperature (assumed to be constant). Rearranging the equation, we get:

V = nRT/P

The number of moles of gas, n, can be found using the ideal gas law:

n = PV/RT

Substituting this expression for n into the equation for V and rearranging, we get:

V = PV/P = 600.0 L

So, at a pressure of 160.0 atm, the volume of the oxygen cylinder is 600.0 L. To find the volume of the oxygen cylinder at a pressure of 3.0 atm, we need to use the relationship between pressure and volume for a gas:

V1/V2 = P2/P1

Rearranging, we get:

V2 = V1 * (P2/P1) = 600.0 L * (3.0 atm / 160.0 atm) = 11.25 L

So, the volume of the oxygen cylinder at a pressure of 3.0 atm is 11.25 L. The closest answer choice to this value is (c) 11 L.

learn more about gas law: https://brainly.com/question/27870704

#SPJ1

It shows that the number of individuals in the population will decrease until the carrying capacity of the environment is reached.

What is the environment?

To know more about environment, click the link given below:

https://brainly.com/question/13107711

#SPJ1

Answer: 1 L

Explanation: M1V1 = M2V2

Given :

M1 =15  M

V1=0.2 L

M2=3  M

V 2= ?

15 × 0.2 = 3V2

​Thus, V 2=1  L

Answer:

Some are Oxidation, Reduction, Combustion and electronegativity

Explanation:

Phenacetin is more polar than aspirin because of its molecular structure. Phenacetin has a polar functional group, the acetamide group (-CONH2), which makes the molecule more polar overall. This group has a positive charge on the nitrogen atom and a negative charge on the oxygen atom, making it a dipole, or a molecule with a positive and negative end.

In contrast, aspirin has a non-polar functional group, the acetyl group (-COCH3), which does not have a dipole moment. This makes aspirin less polar overall.

The polarity of a molecule affects its solubility in different solvents. Polar molecules are soluble in polar solvents, such as water, while non-polar molecules are soluble in non-polar solvents, such as oil. Phenacetin is more soluble in water because of its polar functional group, while aspirin is less soluble in water because of its non-polar functional group.

In summary, phenacetin is more polar than aspirin because it has a polar functional group, the acetamide group, while aspirin has a non-polar functional group, the acetyl group. This difference in polarity affects the solubility of the two molecules in different solvents.

Answer:  Kc = 0.5625

Explanation: The equilibrium constant, Kc, can be calculated using the equilibrium concentrations of the reactants and products: Kc = ([SO₂] * [NO]) / ([SO] * [NO₂]) Plugging in the given concentrations: Kc = (0.350 * 0.650) / (0.650 * 0.350) Kc = 0.5625

The concentration at t = 300 s is  1.1 * 10^-30 M

The rate constant, also known as the reaction rate constant, is a constant of proportionality that relates the rate of a chemical reaction to the concentration of reactants. It is a measure of the speed at which a chemical reaction occurs and is dependent on temperature, pressure, and other physical and chemical factors.

The rate constant is represented by the symbol "k" and is usually expressed in units of reciprocal time, such as per second (s^-1).

We know that for the first order reaction;

ln[A] =ln [A]o - kt

[A] = final concentration at time t

[A]o = Initial concentration

k = rate constant

t = time taken

ln[A] = ln1 - 0.23 * 300

ln[A] = -ln69

[A] = e^-69

= 1.1 * 10^-30 M

Learn more about concentration:https://brainly.com/question/10725862

#SPJ1

Al atoms: 6, S atoms: 9, O atoms: 36, The total number of atoms is 51.

what is 3Al2(SO4)3 ?

3Al2(SO4)3 is a chemical formula that represents the compound aluminum sulfate. It is also sometimes written as Al2(SO4)3.

Aluminum sulfate is a white crystalline solid that is commonly used in water treatment, as a coagulating agent to remove impurities and suspended solids from water. It is also used in the paper industry, in the production of dyes and pigments, and as a food additive. Aluminum sulfate has a variety of other applications as well, such as in the production of aluminum and in the tanning of leather.

The formula 3Al2(SO4)3 indicates that the compound contains three molecules of aluminum sulfate, with a total of six aluminum atoms and nine sulfate ions. Each aluminum sulfate molecule consists of two aluminum atoms and three sulfate ions.

Al atoms: 6, S atoms: 9, O atoms: 36, The total number of atoms is 51.

To learn more about aluminum sulfate follow the given link: https://brainly.com/question/28299913

#SPJ1

As per the temperature, the molecules of a substance act differently. The melting point is -114.2 °C and The boiling point of hydrogen chloride (HCl) is -85.05 °C. The correct sketch in each set is as follows:

Thus, if the temperature is kept above  -85.05 °C, the molecules will be placed widely apart and will be in the gaseous state, revealing their properties.

If the temperature is between -114.2 °C and -85.05 °C, the molecules will be organized in layers capable of slipping over one another since they will be in a liquid state.

At last, the molecules will be arranged in an orderly manner because they will be in a solid state if the temperature is below -114.2 °C.

To learn more about hydrogen chloride,

brainly.com/question/17429912

#SPJ4

Answer: I got you, As4S6 + 9O2 -> As4O6 + 6SO2

Explanation:

As4S6 + 9O2 -> As4O6 + 6SO2

              4     As     4

              6     S     1  6

         18 2     O     8 18

The equation for the formation of each compounds are given below:

N₂ (g) + 3 H₂ (g) --> 2 NH₃ (g)

C (s) + O₂ (g) --> CO₂ (g)

4 Fe (s) + 3 O₂ (g) --> 2 Fe₂O₃ (s)

C (s) + 2 H₂ (g) --> CH₄ (g)

The standard enthalpy of formation of a substance is defined as the enthalpy change that occurs when 1 mole of the substance is formed from its constituent elements in their standard states.

Hf for NH₃ is -46.0 kJ/mol.

Hf for CO₂ is -393.5 kJ/mol

Hf for solid Fe₂O₃ is -826.0 kJ/mol.

Hf for methane gas is -74.9 kJ/mol.

Learn more about standard enthalpy from the link given below.

https://brainly.com/question/30262557

#SPJ4

Answer:

the final temperature of the aluminum after losing 2.87 x 10^3 J of heat is approximately 91.3 °C.

Explanation:

The relationship between heat, mass, and temperature change can be described by the formula:

Q = mcΔT

where Q is the heat transferred (in joules), m is the mass of the sample (in kilograms), c is the specific heat capacity of aluminum (about 0.9 J/g°C), and ΔT is the change in temperature (in degrees Celsius).

Rearranging the equation to solve for ΔT, we get:

ΔT = Q / (mc)

First, we need to convert the mass from grams to kilograms:

m = 53.2 g / 1000 g/kg = 0.0532 kg

Next, we can plug in the values for Q, m, and c and solve for ΔT:

ΔT = (2.87 x 10^3 J) / (0.0532 kg * 0.9 J/g°C) = approximately 63.7 °C

Finally, we can subtract the ΔT from the initial temperature to find the final temperature:

T_final = 155 °C - 63.7 °C = 91.3 °C

On changing dielectric, charge changes directly. It is directly proportional to dielectric permittivity of free space.

In electromagnetism, a dielectric (or dielectric medium) is an electrical insulator that can be captivated by an applied electric field. At the point when a dielectric material is put in an electric field, electric charges don't course through the material as they do in an electrical conduit, since they have no inexactly bound, or free, electrons that might float through the material, however rather they shift, just somewhat, from their typical balance positions, causing dielectric polarization.

Due to dielectric polarization, positive charges are dislodged toward the field and negative charges change in the course inverse to the field (for instance, assuming that the field is moving lined up with the positive x hub, the negative charges will change in the negative x course). This makes an inside electric field that decreases the general field inside the actual dielectric. Assuming a dielectric is made out of pitifully reinforced particles, those atoms become energized.

We know that Q=CV where Q is charge, C is capacitance and V is the voltage of capacitor.

Since, capacitance is equal to= (∈A₀) /d  where ∈ is permittivity of free space or dielectric value.

If we increase dielectric value, capacitance will increase. When capacitance increase ,charge will also increase.

To know more about dielectric,visit here:

https://brainly.com/question/13265076

#SPJ4

The molar mass is 370 g/mol.

The freezing point is the temperature at which a substance changes from a liquid to a solid state. This change of state occurs when the thermal energy of the substance decreases to the point where the molecules can no longer move freely and instead become organized in a fixed, solid structure.

We know that;

ΔT = K m i

ΔT = Freezing point depression

K = freezing constant

m = molality

i  = Van't Hoff factor

Thus;

Molality = 35.3/M/148.5 * 10^-3

Where M is the molar mass

Then;

ΔT = Freezing point of pure solvent - Solution

= 0 - (-1.2°C) = 1.2°C

Thus;

1.2 = 1.86 * 35.3/0.148 M * 1

1.2 * 0.148 M = 1.86 * 35.3

M = 1.86 * 35.3/1.2 * 0.148

M = 65.658/0.1776

M = 370 g/mol

Learn more about freezing point:https://brainly.com/question/3121416

#SPJ1

The molar heat capacity at constant volume of the gas is 100 J/mol·K, and the molar heat capacity at constant pressure of the gas is 108.31 J/mol·K.

What is molar heat capacity?

Molar heat capacity, also known as specific heat capacity, is the amount of heat required to raise the temperature of one mole of a substance by one degree Celsius (or Kelvin). The molar heat capacity is expressed in units of joules per mole per kelvin (J/mol·K).

The molar heat capacities at constant volume (Cv) and constant pressure (Cp) can be calculated using the following equations:

Cv = ΔQ/ΔT (at constant volume)

Cp = ΔQ/ΔT (at constant pressure)

where ΔQ is the heat absorbed by the gas and ΔT is the change in temperature.

In this case, ΔQ = 178 J and ΔT = 1.78 K.

At constant volume, the heat absorbed by the gas will cause an increase in the internal energy of the gas, so only the Cv can be calculated.

Cv = ΔQ/ΔT = 178 J / 1.78 K = 100 J/mol·K

At constant pressure, the heat absorbed by the gas will cause an increase in both the internal energy and the pressure-volume work done by the gas, so Cp can be calculated. The relationship between Cp and Cv is given by:

Cp = Cv + R

where R is the universal gas constant (8.31 J/mol·K).

Cp = Cv + R = 100 J/mol·K + 8.31 J/mol·K = 108.31 J/mol·K

Therefore, the molar heat capacity at constant volume of the gas is 100 J/mol·K, and the molar heat capacity at constant pressure of the gas is 108.31 J/mol·K.

To learn more about molar heat capacity:

https://brainly.com/question/29503243

#SPJ1

Answer: Single Replacement

Explanation:

This is single replacement because the Fluorine replaces Bromine in the Sodium Bromide solution. This happens because Fluorine is higher on the halogens activity series.

The concentration of a solution can be expressed in molarity, molality, mass percent, etc. By dissolving the same number of moles of each substance in the same volume of water a scientist make two solutions with the same molarity. The correct option is A.

The molarity of a solution is defined as the number of moles of the solute present per litre of the solution. It is usually expressed in mol / L. The equation used to calculate the molarity is:

Molarity = Number of moles of the solute / Volume of the solution in litres

The solutions with the same number of moles and volume have equal molarity.

Thus the correct option is A.

To know more about molarity, visit;

https://brainly.com/question/19517011

#SPJ9

Answer:

No

Explanation:

Vitamins cannot be a direct source of energy for muscle work. Vitamins play important roles in various metabolic processes, but they do not provide energy directly. Energy is primarily provided by the breakdown of carbohydrates, fats, and proteins. Vitamins are essential for the proper functioning of these metabolic processes and for the release of energy from these macronutrients.

Answer:

Vitamins are not a reliable source of immediate energy for working muscles. Vitamins are necessary for optimum health and for supplying energy for many metabolic processes, however they do not directly provide energy to muscles. The breakdown of glucose or glycogen, which is stored in muscle cells, is the main source of energy for muscle action. Although they are not an energy source in themselves, vitamins are essential for supporting the metabolic processes that turn glucose and glycogen into energy. Vitamin consumption must remain adequate to sustain healthy energy metabolism and overall health, but vitamins cannot take the place of the need for carbohydrates and other meals high in energy to power physical activity.

Explanation: