sort the following manganese compounds by whether the cation is manganese(ii) or manganese(iii).
Drag each item to the appropriate bin. View Available Hint(s) Reset Help MnSs MnN MnBrz Mnl, Mn,P2 Mno Manganese(l) Manganese(III)

The balanced equation will be K₂CrO₄ + Na₂SO₃ + 2HCl → 2KCl + Na₂SO₄ + CrCl₃ + H₂O.

A balanced chemical equation is a chemical reaction that has equal numbers of moles of chemical substances both in the reactant and the product side.

K₂CrO₄ + Na₂SO₃ + HCl → KCl + Na₂SO₄ + CrCl₃ + H₂O.

Notice that there are two K atoms on the left and one on the right, two Cr atoms on the left and one on the right, four O atoms on the left and one on the right, two Na atoms on the left and two on the right, three S atoms on the left and one on the right, and one H atom on the left and one on the right.

Balance the K atoms, by adding a coefficient of 2 in front of the KCl on the right side of the equation. To balance the Cr atoms, we can add a coefficient of 2 in front of the CrCl3 on the right side of the equation. To balance the O atoms, we can add a coefficient of 3 in front of the H2O on the right side of the equation. To balance the Na atoms, we don't need to add any coefficient. To balance the S atoms, we don't need to add any coefficient. To balance the H atoms, we can add a coefficient of 2 in front of the HCl on the left side of the equation.

The coefficients are now in the smallest whole-number ratio possible.

Check if the equation is now balanced.

So, the balanced equation is: K₂CrO₄ + Na₂SO₃ + 2HCl → 2KCl + Na₂SO₄ + CrCl₃ + H₂O.

Learn more about balanced equation here: https://brainly.com/question/26694427

#SPJ4

The products remain in aqueous solution, so all phases in the reaction are aqueous.

An aqueous solution is a solution in which the solvent is water. In it, the solutes are dissolved in the water and form a homogenous mixture. Many substances can dissolve in water, including salts, acids, bases, and other organic compounds. Aqueous solutions are used for many purposes in the natural world, including for metabolic processes, and for cleaning and sterilizing.

MnO4−(aq) + CH3OH(aq) → Mn2+(aq) + HCO2H(aq)
Phases:
MnO4−(aq): Aqueous
CH3OH(aq): Aqueous
Mn2+(aq): Aqueous
HCO2H(aq): Aqueous
The reaction is an acid-base neutralization reaction where the acidic oxyanion MnO4− reacts with the base CH3OH to form the acidic product HCO2H and the cation Mn2+. The products remain in aqueous solution, so all phases in the reaction are aqueous.

To learn more about aqueous solution
https://brainly.com/question/24658038
#SPJ4

MgCl2 + KOH will yield a precipitate because Since Mg(OH) is considered to be "insoluble" based on the solubility chart, it will precipitate where the other reactions listed above are unstable and quickly decompose into water and carbon dioxide.

In chemistry, a solid is created when a solution changes, frequently as a result of a chemical reaction or a shift in temperature that makes a solid less soluble. A solid that emerges from a solution is called a precipitate. The mixing of two transparent solutions, such as sodium chloride (NaCl) and silver nitrate (AgNO3), is a typical example. The response is. Because the solid (AgCl) is insoluble in water, a precipitate forms. The term "supernate" or "supernatant" also refers to the clear liquid that remains on top of the precipitated or centrifuged solid phase.

Here,

Since Mg(OH) is regarded as being "insoluble" according to the solubility chart, MgCl2 + KOH will result in a precipitate where the other reactions mentioned above are unstable and quickly decompose into water and carbon dioxide.

To know more about precipitate,

https://brainly.com/question/15769904

#SPJ4

I2(g)+Cl2(g)2ICl(g),Kp=81.9 equals 1.091 x 104 J/mol. A system's energy-like property of state function when it is in thermodynamic equilibrium. Free energy shares the same dimensions as other forms of energy, yet unlike other forms of energy, its worth depends on the current condition of the system rather than its past.

Free and Gibbs free energy G, which differs from the overall energy change in a chemical reaction, is the amount of energy in a system that can be used to carry out useful work.

Due of its simplicity and accessibility at all times, Gibb free energy is also known as free energy. If necessary, this energy can be provided to the reaction without any effort on its part. The product of the system's temperature and entropy, added together with the system's enthalpy, determines the change of Gibb's free energy.

To know more about free energy visit:

https://brainly.com/question/15319033

#SPJ4

MnO crystallize in the CsCl type structure. The ionic radius of manganese is 79pm.The calculated cation-to-anion radius ratio for MnO doesnot substantiate.

When atoms or molecules are tightly organized into a structure known as a crystal, a solid is said to have crystallized. Crystals can also form by deposition directly from a gas, precipitating from a solution, or freezing.

a. The NaCl type structure has a face-centered cubic unit cell and the CsCl type structure has a body-centered cubic unit cell. The edge length of a face-centered cubic unit cell is related to the density of the compound as follows:

Edge length = (density)^(-1/3)

The edge length of a body-centered cubic unit cell is related to the density of the compound as follows:

Edge length = (2 * density)^(-1/3)

So, MnO crystallizes in the CsCl type structure.

b. To estimate the ionic radius of manganese in MnO, we can use the edge length of the unit cell and the ionic radius of oxygen. The edge length of the unit cell is equal to twice the distance between cation and anion.

Edge length = 2 * (ionic radius of cation + ionic radius of anion)

By solving the above equation for the ionic radius of manganese, we get:

ionic radius of manganese = (edge length / 2) - ionic radius of oxygen

ionic radius of manganese = (4.47 * 10^-8 cm / 2) - 14010^-12 m = 0.7910^-8 m = 79*10^-12 m = 79 pm

c.  By comparing this ratio with typical values for ionic compounds, we can get an idea of the likely crystal structure of a compound.

For compounds that have a cation-to-anion radius ratio greater than 0.7, the crystal structure is likely to be the CsCl type, while compounds with a cation-to-anion radius ratio less than 0.7 are more likely to have a NaCl type structure.

The cation-to-anion radius ratio for MnO is calculated as follows:

Cation-to-anion radius ratio = (ionic radius of manganese) / (ionic radius of oxygen) = 7910^-12 / 14010^-12 = 0.56

As the calculated cation-to-anion radius ratio for MnO is less than 0.7, it does not substantiate.

To know more about crystallization, visit:

brainly.com/question/2130720

#SPJ4

The statement defines a field force is b) a force that acts through toucha force that acts through touch.

Field force is a term to express a force that has an influence on its surroundings. Examples are gravitational forces, electric forces, magnetic forces. The three styles have a strong influence on the surrounding area.

In general, the notion of force is an interaction that can cause an object with mass to experience a change in motion, both in terms of direction and geometry. While the definition of force in a nutshell is a push or pull that is able to move objects freely (not bound).

The concept of force is often juxtaposed with motion. Because, the motion of an object occurs because of the force. Although often equated, in fact force and motion are two different things.

Learn more about field force at

https://brainly.com/question/13488023

#SPJ4

The empirical formula of a substance would be transformed into a molecular formula using Molar Mass.

The empirical formula of a chemical compound in chemistry is the simplest whole number ratio of atoms in a compound. A chemical formula identifies each component element by its chemical symbol and the proportion of atoms that make up each element. Calculate the compound's molar mass by deducting the empirical formula mass. The result must be a whole number or very close to one. You need to know a compound's molar mass or molecular mass in order to convert its empirical formula into a molecular formula.

Learn more about Empirical Formula

brainly.com/question/11588623

#SPJ4

Among the following salts, when added to water, will result in a solution with pH = 7.00 is (b) NaNO₃

The chemical formula for sodium nitrate is NaNO₃, and it occurs in the form of a white solid that is crystalline. It is a nitrate salt that is inorganic and of an alkaline metal. It dissolves easily in water and has applications in the manufacture of things like fertilizers, glass, and solid rocket propellant, among other things. Sodium nitrate is a powerful oxidizing agent that does not support combustion and is safe to handle.

The chemical reaction between a strong base (NaOH) and a strong acid (HNO₃) results in the formation of the salt NaNO₃. They are neutral salts. Therefore, the pH level ought to be 7.

You can also learn about pH from the following question:

https://brainly.com/question/15289741

#SPJ4

The Avogadro's constant, or 022 x 10 23 particles, is the quantity that corresponds to 1 mole.

What does the Avogadro's constant teach us about calculating the amount of moles of any material in the sample?

We may determine the number of particles in 1 mole (or mol) of a material using Avogadro's number. These particles can be atoms, molecules, or electrons. Avogadro's number is equivalent to around 6.0221408571023 mol1.

What makes it Avogadro's number?

It bears the name of the Italian physicist Amedeo Avogadro, who discovered that two gases of equal volume have the same number of molecules when they are at the same temperature and pressure. Early in the 20th century, French scientist Jean Perrin gave the number of units that name.

To know more about Avogadro's constant visit:

https://brainly.com/question/10432809

#SPJ1

If 0.120 m HCl is slowly added to the NaOH sample, then if the acidic solution increase greater than basic solution, the pH range indicator will change its color between 4.4 and 6.2 indicating red color.

Methyl red has a pKa value of 5. Consequently, between its pKa values of 4 and 6, it displays a colour change range of +/-1 pH unit. In acidic conditions, methyl red, an indicator dye, turns red. It serves as a pH indicator, turning yellow above pH 6.4 and orange between pH 4.4 and 6.2. An azo dye called methyl red is created from benzoic acid and a 2-positional 4-[(dimethylamino)phenyl]diazenyl group. It serves as a dye. It is a monocarboxylic acid, a tertiary amino compound, and a member of the azobenzene family.

To learn more about pH click here      https://brainly.com/question/491373

#SPJ4

Consider a reaction that produces a significant amount of hydrogen ion and is to be carried out a pH 7. The acid would serve as the optimum buffer for this reaction is the acid A.

The pH = 7

The pka value of the acid A = 6.3

The pka value of the acid B = 7.3

The buffer range is given as :

For acid A = (pka + 1 ) to (pka - 1)

The optimal buffer range is the range of the buffer in the dissociation constant of the weak acid to the buffer pka plus or the minus pH unit.

To learn more about pH here

https://brainly.com/question/21801382

#SPJ4

The following reaction CH3 + H2SO4 CH3SH, is completed.

Reaction is the way in which a person or an organism responds to a stimulus. It is a change in behavior or in the physiological or biochemical structures of an organism in response to a stimulus. Reactions can be physical, emotional, or mental. In humans, physical reactions include increased heart rate, sweating, and changes in facial expressions. Emotional reactions include feeling angry, scared, excited, or sad. Mental reactions include thinking, analyzing, and problem solving. All of these reactions are part of the body’s response to stimuli, such as a sound, a smell, a touch, or a taste.

To learn more about reaction
https://brainly.com/question/24795637
#SPJ4

The products for the following synthesis reaction: Al + Cl2 is AlCl₃ (option C).

A chemical reaction is a process involving the breaking or making of interatomic bonds, in which one or more substances are changed into others.

A synthesis reaction is a specific type of chemical reaction that involves the combination of two chemical elements bonded together to produce a compound.

According to this question, aluminium and chlorine gas are combined to form aluminium chloride as follows:

2Al + 3Cl₂ → 2AlCl₃

Therefore, AlCl₃ is the product of the synthesis reaction.

Learn more about synthesis reaction at: https://brainly.com/question/16987748

#SPJ1

After identifying the atoms and counting the quantities of the reactants and products in the equation, Charlie makes the necessary adjustments to the coefficients so that the number of atoms in the reactants and products are equal.

An atom is made up of a core negatively charged nucleus and one or more circling electrons. The positively charged, relatively large protons and neutrons that make up the nucleus could be present. But for the origin of the name "atom," we must look to 400 B.C. in ancient Greece. Greek philosopher Democritus proposed the usage of the word atomos, which meaning "uncuttable," in this sentence. Ultimately, he asserted, all matter may be reduced to singular, tiny particles called atomos.

An atom is made up of protons, neutrons, and electrons that orbit a core nucleus. Uranium splits into smaller atoms and creates new atoms during the fission process. There have been a tremendous number of atoms generated, as evidenced by the Big Bang and supernova events.

To know more Atoms visit:

https://brainly.com/question/13654549

#SPJ4

The concentration of Cd^2+ when Fe^2+ begins to precipitate is 1.50x10^-2 M.

Concentration is the ability to focus intently on a task or activity in order to achieve a desired result. It is a mental skill that requires the ability to ignore distractions, remain focused and motivated, and use all of one's mental resources to complete a task. By developing and strengthening this skill, one can increase their productivity and learn to better manage their time. Concentration also involves the ability to organize and prioritize tasks, as well as to remember and recall information. Concentration is an important skill in many fields, including academics, sports, and the workplace.

The concentration of Cd^2+ when Fe^2+ begins to precipitate will be equal to the original concentration of Cd^2+ in the solution, which was 1.50x10^-2 M.
Therefore, the concentration of Cd^2+ when Fe^2+ begins to precipitate is 1.50x10^-2 M.

To learn more about concentration
https://brainly.com/question/28564792
#SPJ4

The chemical formula of the two elements X whose charge is 2 and Y whose charge 3 is X3Y2.

These steps are used to respond to this type of assignment question:

Remember that every substance has a neutral pH level. In other words, a similar number of positive charges are used to offset any negative charges.

In this scenario, multiplying 2 by a unit of Y will get the total charge for the products.

Determine how much total counter-charge you'll require.

The required charge distribution can be calculated using the formula. Here, X is divided into three equal units for each unit.

Anion valency = number of cations

A cation's valency is equal to the number of anions.

Thus, X3Y2 will be the proper formula.

For more information on chemical formula kindly visit to

https://brainly.com/question/14301583

#SPJ4

Adding too much titrant will result in an artificially inflated value for the mass percent of iron in the compound.

Compound is a combination of two or more elements, either in distinct substances or in a single substance, combined in fixed proportions. Compounds can be formed from elements that are naturally occurring, such as salt (NaCl) or from synthetic elements, such as plastics. Compounds can be classified into organic and inorganic compounds. Organic compounds are typically composed of carbon and hydrogen atoms, while inorganic compounds often contain other elements, such as oxygen, nitrogen, sulfur, and phosphorus.

This is because the experimental value of the mass percent of iron is based on a calculation of the amount of titrant used to achieve a specific endpoint, and if too much titrant is added, the endpoint will be reached sooner than it would otherwise.

To learn more about compound
https://brainly.com/question/12862037
#SPJ4

An ATP (adenosine triphosphate) molecule is made up of three main components:

1. Adenosine: a nitrogenous base that is composed of adenine, a nitrogen-containing base, and ribose, a five-carbon sugar.

2. Three phosphate groups: These are molecules that consist of a phosphate ion (PO4) and an organic molecule. In ATP, the three phosphate groups are connected to the ribose sugar in a linear fashion, forming a "triphosphate" molecule.

3. A high-energy bond: The high-energy bond is located between the second and third phosphate groups. This bond is formed by the transfer of a phosphate group from the third to the second position, releasing energy that can be used by cells for various metabolic processes.

Together, these three components make up the structure of an ATP molecule, which is considered the "energy currency" of cells.

It acts as a carrier of energy derived from the breakdown of food molecules, like glucose, to the energy-requiring reactions in the cell.

It's worth noting that, The structure and properties of ATP are essential for its function as a primary energy carrier in all living organisms.

Answer:

Explanation: it's right

Answer:

Claim: The round cast iron container filled with ice water and sealed with a lid will maintain its temperature for a certain period of time.

Evidence: The container is made of 1/8 inch thick cast iron and the lid is tightened to prevent heat loss. The container is placed in a metal dish that contains dry ice and acetone which will help to decrease the temperature inside the container.

Reasoning: The cast iron container is a good insulator which means it will slow down the transfer of heat from the inside to the outside. The lid will help to prevent heat loss through convection. The dry ice and acetone in the metal dish will provide a cooling effect to the container, which will help to keep the temperature inside the container low for a longer period of time. The combination of insulation and cooling will help to maintain the low temperature inside the container for a certain period of time.

Answer:

It's not entirely clear whether your question is asking for the percent composition of phosphorus in the substance or the percent composition of all the elements in the substance that contains phosphorus. In either case, the percent composition of phosphorus in this substance is 16.9%.

The percent composition of all the elements in the substance is 48.1% nickel, 16.9% phosphorus, and 35.0% oxygen.

Explanation:

The percent composition of a substance in a sample can be found by dividing the mass of each element present in the sample by the total mass of the sample, and then multiplying by 100%.

To find the percent composition of the substance, we compute the total mass of the sample by adding the masses of all the elements present:

7.22 g + 2.53 g + 5.25 g = 15 g

Next, we divide the mass of each element by the total mass of the sample (15 g) and multiply by 100%.

Nickel: (7.22 g / 15 g) * 100% = 48.13%

Phosphorus: (2.53 g / 15 g) * 100% = 16.87%

Oxygen: (5.25 g / 15 g) * 100% = 35.00%

Given to three significant figures, the percent composition of the substance is: 48.1% nickel, 16.9% phosphorus and 35.0% oxygen.

Two school classes are playing tug-of-war with a rope. The correct two statements are : b. the forces are unbalanced, and the rope will move to the left and d. the net force on the rope is 35 n to the left.

Two  school classes are playing tug-of-war with a rope. one class pulls on the rope with a 75 n force to the left, the other pulls with a 40 n force to the right. The forces are unbalanced. When the fore resulting on the body is not equal to the zero the forces are called as the unbalanced forces.

The net force = 75 N - 40 N

                       = 35 N

Thus, the net force is 35 N.

To learn more about force here

https://brainly.com/question/28280577

#SPJ4

Iron must be added to the refined flours during the enrichment process.

Refined grain products to be enriched. this means adding returned certain B vitamins (thiamin, riboflavin, niacin, folic acid) and iron. but, fiber isn't brought again to enriched grains.

The germ is the center of the seed where boom happens; it's far rich in healthy fats, diet E, and B nutrients, phytochemicals, and antioxidants. The endosperm is the interior layer that holds carbohydrates, protein, and small amounts of a few B vitamins and minerals.

The 5 enrichment nutrients are defined by way of the meals and Drug Administration (FDA) and consist of thiamin (vitamin B1, thiamin mononitrate, or thiamin hydrochloride); riboflavin (diet B2); niacin (vitamin B3 or niacinamide); folic acid folate and iron (reduced iron, ferrous sulfate, or ferric orthophosphate).

Learn more about refined grain products:

brainly.com/question/27635345

#SPJ4

The substance with lower specific heat capacity cools fastly. Ethanol cool fastly than water. Thus option D is correct.

Specific heat capacity of a substance is the heat energy required to increase its temperature by one degree Celsius per on gram.  It is an intensive property. Thus does not depends on change in amount.

The substance with high specific heat capacity requires higher heat energy to increase its temperature and takes more time to heat it up as well as to cool.

The specific heat of ethanol is lower compared to water. Thus, it becomes hot as well as cool more fastly than water. Therefore, ethanol cool fastly.

Find more on specific heat :

https://brainly.com/question/11297584

#SPJ1

The hypothesis is that the increase in concentration of sucrose results in increased amount of osmosis.

A hypothesis refers to a proposed explanation for a phenomenon. It is a testable statement regarding the relationship between two or more variables or a proposed explanation for some observed phenomenon. It is an assumption made based on some evidence as presented in the table. In the table it is seen that as sucrose concentration increases, the net displacement decreases. Hence, based on the evidence it can be hypothesized that “the increase in concentration of sucrose results in increased amount of osmosis”.

The reasoning is based on the initial volume (which is same for all) and final volume (which decreases with the increasing concentration of sucrose) and net displacement. Osmosis refers to the movement of water molecules from a solution with a high concentration of water molecules to a solution with a lower concentration of water molecules, through a partially permeable membrane. Net displacement refers to the number of molecules in the direction of the forces minus the number of molecules moving in other direction. Hence, as the net displacement decreases with concentration of sucrose it can be inferred that the increase in concentration of sucrose results in increased amount of osmosis.

Note: The question is incomplete. The complete question is attached.

Learn more about Hypothesis:

https://brainly.com/question/11555274

#SPJ4

The formulae of compounds 2 and 3 is XY₂ and XY₃.

A chemical compound is a substance made of numerous identical molecules joined by chemical bonds and containing atoms from various chemical elements. Therefore, a molecule composed entirely of one element's atoms is not a compound. a material made up of two or more different elements joined chemically. Compounds include things like water (H2O), which is created from the elements hydrogen and oxygen, and table salt (NaCl), which is created from the elements sodium and chloride. A substance made up of two or more constituents is called a compound. Water, carbon dioxide, and table salt are examples of compounds.

Here,

The formulae of compounds 2 and 3:

Compound 1: XY6 (2.82g)

Compound 2: XY? (1.41g)

Compound 3: XY? (0.94g)

Compound 1: 2.82/6 = 0.47

Compound 2: 1.41/0.47 = 2

Compound 3: 0.94/0.47 = 3

Compounds 2 and 3 have the following formulas as XY₂ and XY₃.

To know more about compound,

https://brainly.com/question/13516179

#SPJ4

The warm air in Earth’s atmosphere and the warm water in Earth’s oceans sink instead of rise.

The heat energy can be transported by convection by the temperature differential between the two portions of the fluid. Hot fluids tend to ascend due to the temperature differential, but cold fluids prefer to sink. This causes a convection current to form inside the fluid.

Differential heating causes convection currents. Warmer (less dense) stuff rises, whereas cooler (more dense) material sinks. This movement is responsible for the formation of circulation patterns known as convection currents in the Earth’s atmosphere, ocean, and mantle.

To learn more about convection to refer:

https://brainly.com/question/4138428

#SPJ4

The following nuclear equation needs a particle to be complete: 23893np =56/26 Fe.

The sign is accompanied by two numbers. The mass number, commonly referred to as the "A" number, is the number in the upper right. The "A" number identifies the number of protons and neutrons in the nucleus as well as the atomic weight of the given atom.

there is a mass shift, m, as a result of nuclear fusion and nuclear fission. Energy E = mc2, where c is the speed of light, is created when mass is lost.

To know more about nuclear equation visit:

https://brainly.com/question/19752321

#SPJ4

Answer: Answer: If the amount of reactants is halved, the amount of H2O(l) produced in the reaction will also be halved.

Explanation: The balanced equation for the reaction between HCl(aq) and NaOH(aq) is:

HCl(aq) + NaOH(aq) --> NaCl(aq) + H2O(l)

From this equation, it is clear that for every 1 mole of HCl(aq) and 1 mole of NaOH(aq) that react, 1 mole of H2O(l) is produced.

If the amount of reactants is halved, the amount of H2O(l) produced will also be halved, because the ratio of reactants to products is 1:1.

So, in the case of 20.mL of 0.10MHCl(aq) + 0.10MNaOH(aq) , the amount of H2O(l) produced is 20.mL x 0.10M = 2.00x10^-3mol.

If the amount of reactants is halved, the amount of H2O(l) produced in the reaction will be 1.00x10^-3mol.

1. A gas is emitted when the mixture begins to fizz.

2. As the ingredients are combined, the test tube gets cooler

3. The combination turns a strong blue tint

The notion of emission gases is outlined above The objective of this example is to resolve the OPF problem in such a way that both FC and emission are concurrently reduced As the seas warm, they release gases, which is how the desired function is described Sunday TimesThe researchers determined the gass pressure and translated it to volumeThe ResearcherIt continued to release gasSunday Times, Times It has a large number of reddish galaxies that are encircled by gas that emits xrays taken from Wikipedia with a CC BYSA 3.0 license, available Flames that are higher up in the material heat it and release gases that selfignite proving the flashover idea

Learn more about A gas is emitted here:

https://brainly.com/question/12737906

#SPJ4