subduction zones occur a what type of plate boundary?

Answers

Answer 1

Subduction zones occur at a convergent plate boundary. In a convergent boundary, two tectonic plates come together.

At a subduction zone, the denser plate, usually an oceanic plate, is forced beneath the less dense plate, usually a continental plate, creating a deep ocean trench. The oceanic plate begins to melt as it descends deeper into the Earth's mantle and the heat and pressure cause it to deform and slowly sink into the mantle.This sinking process creates a zone of intense geological activity, including earthquakes, volcanic eruptions, and the formation of mountain ranges. The Andes Mountain range in South America, for example, formed as a result of subduction of the oceanic Nazca Plate beneath the South American Plate.Subduction zones also play a crucial role in the Earth's carbon cycle, as the sinking oceanic plate carries large amounts of carbon-rich materials into the mantle, where they are eventually recycled back to the surface through volcanic eruptions.

learn more about subduction here:

https://brainly.com/question/30032689

#SPJ4


Related Questions

are the most prominent depositional features created by currents. group of answer choices headlands estuaries beaches spits

Answers

Since ocean waves have a lot of energy, they might cause a lot of erosion. Platforms, arches, and sea stacks are examples of landforms created by erosion.

Sand that has been transported will eventually end up on beaches, spits, or barrier islands.

What kinds of landforms does coastal deposition produce?

Sand dunes, spits, bars, and sandy and pebbled beaches are all coastal landforms created by deposition.

Is a spit deposited or eroded?

deposition A deposition bar or beach landform off the shores of lakes or coasts is known as a spit or sandspit. It develops as a result of longshore drift caused by longshore currents in locations where re-entry takes place, such as the headlands of a cove.

To learn more about ocean waves here:

https://brainly.com/question/350979

#SPJ4

what is the piece of infrastructure that connects the red sea to the mediterranean sea?

Answers

The Suez Canal is a marvel of engineering that links the Mediterranean Sea to the Red Sea.

It connects the Mediterranean Sea to the Red Sea, the Indian Ocean, and the Red Sea across a 120-mile man-made waterway. It is one of the most crucial shipping lanes in the world since it enables ships to go between Europe and Asia without having to go through Africa.

The Suez Canal Authority oversees the operation of the canal, which was built between 1859 and 1869. Ships with a draught of up to 160 feet may travel through the canal, which is maintained at a width of 205 feet and a depth of 79 feet.

The canal is a crucial commerce route that cuts the time it would take a ship to circle Africa and reach the Indian Ocean in half. The Suez Canal is also a significant source of cash for the Egyptian government, generating around $5 billion annually.

To learn more about Suez Canal visit:

https://brainly.com/question/1050424

#SPJ4

what region has about half of the world’s known oil reserves?

Answers

According to current estimates, OPEC Member Countries own 80.4% (1,241.82 billion barrels) of the world's proven oil reserves, with the Middle East holding the majority of these reserves at 67.1% of the OPEC total.

With an estimated 836 billion barrels of proven oil reserves in the Middle East in 2020, the region accounts for nearly half of the world's total proven oil reserves. The Americas retained reserves of more over 560 billion barrels that year, meanwhile.

However, there are also supergiant (>10 billion bbls) oilfields in Brazil, Mexico, Venezuela, Kazakhstan, and Russia. The majority of the world's largest oilfields are found in the Middle East.

learn more about oil reserves

https://brainly.com/question/241564

#SPJ1

The radius of a circle is 6 meters. What is the length of a 120° arc?

Answers

The length of a 120° arc is 12.58m

What is meant by circumference?

The circumference of a circle equals the length around it, however, this cannot be used as a definition of the distance is defined in terms of straight lines, as it is in many beginning lectures. Under these assumptions, the circumference of a circle may be defined as the limit of the perimeters of inscribed regular polygons with an increasing number of sides. Circumference may be used to define both real-world objects and abstract geometric forms.

The circle's overall circumference is = 2πr

The total circle has 360°.  

Given arc has only 120°.

Hence,

= 2×22/7×120/360

= 88/7

=12.58

To learn more about Circumference, click

https://brainly.com/question/29084397

#SPJ1

Why does the wind at A change direction from south east to south west

Answers

The wind at a change direction from South East to South West due to Coriolis effect.

In most cases, the winds that prevail blow from east to west rather than from north to south. The Coriolis effect is responsible for this phenomenon, which takes place as a direct result of the rotation of the Earth. Because of the Coriolis effect, wind patterns in the Northern Hemisphere rotate counter-clockwise, whereas wind patterns in the Southern Hemisphere rotate clockwise.

A cyclone is a low-pressure phenomenon that draws air into its center, often known as its "eye." Fluids coming from high-pressure systems in the Northern Hemisphere go to the right, passing low-pressure systems on their way. When air masses are pulled into cyclones from all directions, they are deflected, and this gives the impression that the storm system, in this case a hurricane, is rotating in the opposite direction of clockwise. Currents are deflected to the left in the Southern Hemisphere because to the Earth's tilt. As a direct consequence of this, storm systems appear to rotate in a clockwise direction.

To learn more about Coriolis effect, click here:

https://brainly.com/question/14290551

#SPJ4

the process in which a denser plate is pushed beneath a less dense plate
Choose matching term
1 Trenches
2 Tectonic Plates
3 Lithosphere
4 Subduction

Answers

Option (D) Subduction zone is the correct option.

It is a process where heavier/denser tectonic plate sinks underneath the lighter/less denser tectonic plate, forcing to melt and rise to the surface in the form of molten rock (known as magma).

The subduction zones are usually formed between convergent plate boundaries. such plates cause great destruction over the surface and often characterized by possessing large numbers/series of volcanoes. The 'Ring of Fire', located in pacific ocean is a classic example.

Hence, the overrun plate is subducted into the mantle and a part of which is melted.  It is generally believed that plates move around over the Asthenosphere.

The Theory of Plate Tectonics was devised by Alfred wegner in the 1920s. He tried to study the earth's dynamic interior structure.    

Learn more about Subduction zones: https://brainly.com/question/3239204

where would you expect terrestrial planets to form in the solar nebula?

Answers

Terrestrial planets are expected to form closer to the sun in the solar nebula.

This is because the temperatures are higher closer to the sun, leading to the formation of rocks and metals. As a result, the building blocks for terrestrial planets, such as silicates and metals, would be more abundant in this region.

Additionally, the gas and dust particles are denser closer to the sun, providing more material for the planets to form. Conversely, the outer regions of the solar nebula are colder and have more gas, leading to the formation of gas giants like Jupiter and Saturn.

The formation of planets depends on many factors, including distance from the star, temperature, and the abundance of building blocks, and the formation of terrestrial planets in the inner regions of the solar nebula is consistent with current theories of planetary formation.

For more questions like Terrestrial click the link below:

https://brainly.com/question/29829522

#SPJ4

What are air masses and how do they affect weather? HELP ASAP, PLEASE
Answer this question in a short paragraph (4-5 sentences)

Answers

Air masses are large bodies of air that have similar temperature and humidity characteristics. They are formed over large areas and can affect weather by bringing in different temperatures, humidity levels, and precipitation.

How Air masses be described?

Large bodies of air called air masses share comparable properties of temperature and humidity. They are created over broad areas and have the power to change the weather by bringing in various temperatures, degrees of humidity, and precipitation. In contrast, a cold, dry air mass from Canada can bring in chilly temperatures and low humidity levels. As an illustration, a warm, humid air mass from the Gulf of Mexico can bring in warm temperatures and high humidity levels.

Large amounts of air that are typically the same temperature and pressure are called air masses. Different pressures and temperatures characterize unstable air masses. Storms can be produced by unstable air masses, such as this one over the German North Sea.

Learn more about Air at:

https://brainly.com/question/441281

#SPJ1

Answer:

An air mass is a large body of air that has similar temperature and humidity across its whole area. These air masses form over large bodies of land or water, and they are the main determinant of the weather in a given region. Air masses affect the weather by influencing the temperature, humidity, air pressure, and wind. For example, cold air masses can cause winds to blow from the north, resulting in cold and dry weather. Warm air masses on the other hand, bring warm, moist air that can result in more moderate temperatures as well as rain or thunderstorms.

what is the function of approacha and departure control during ifr

Answers

The function of approach and departure control during IFR (Instrument Flight Rules) is to provide guidance and separation for aircraft in the terminal area.

Approach control is responsible for handling aircraft arriving at an airport, while departure control is responsible for handling aircraft leaving an airport.

During IFR operations, approach and departure control use radar and other technology to provide instructions to pilots, including headings, altitudes, and speed adjustments, to ensure safe and efficient flight. These controllers also coordinate with other air traffic control facilities, such as en route centers, to ensure a smooth transition for aircraft entering or leaving their airspace.

In summary, approach and departure control play a crucial role in maintaining the safety and efficiency of aircraft operations in the terminal area during IFR conditions.

Read more about IFR at https://brainly.com/question/28945270.

#SPJ11

the chicxulub crater is an impact crater buried underneath the yucatán peninsula in mexico. (True or False)

Answers

True. The Chicxulub crater is a massive impact crater beneath Mexico's Yucatán Peninsula.

One of the biggest known impact craters on Earth, the crater is thought to measure 180 kilometres (110 miles) in diameter. It is thought to have been created 66 million years ago by the collision of an asteroid or comet.

At the end of the Cretaceous epoch, the mass extinction of dinosaur species is largely believed to have been caused by this event. The crater is thought to have been produced by an asteroid or comet with a diameter of 10 to 15 kilometres (6 to 9 miles) striking the Earth at a speed of 20 kilometres per second (45,000 mph).

The heat from the collision destroyed the asteroid or comet and melted the rocks, producing a huge cloud of dust that obscured the sun and drastically reduced temperatures.

As a result, there was a period of significant climatic change, which is considered to be one of the main reasons for the mass extinction event.

To learn more about Earth visit:

https://brainly.com/question/15205710

#SPJ4

3. The text states that fault block mountains are formed when, "pieces of rock are
broken off and driven upward by the force of the shifting plates." Based on this
evidence, what conclusion can you draw about the force of Earth's shifting plates?
A. The force of Earth's shifting plates is somewhat gentle.
B. The force of Earth's shifting plates is loud.
C. The force of Earth's shifting plates is very powerful.
D. The force of Earth's shifting plates is created quickly.iyyiuuh

Answers

Answer:

I believe its C. the force of earths shifting plates is very powerful

1. Which trig function should we use to solve for x in the image below? *
12
H
37
X
Sine (Sin)
O Cosine (Cos)
O Tangent (Tan)

Answers

Cosine is the  trig function should we use to solve for x in the image below. Hence, option B is correct.

What is trigonometric?

Trigonometry is the study of the relationships between the angles and the lengths of the sides of triangles

The six trigonometric functions are sin , cos , tan , cosec , sec and cot

Let the angle be θ, such that

sin θ = opposite / hypotenuse

cos θ = adjacent / hypotenuse

tan θ = opposite / adjacent

tan θ = sin θ / cos θ

cosec θ = 1/sin θ

sec θ = 1/cos θ

cot θ = 1/tan θ

Given data,

Let the triangle be ΔABC , where ∠B = 90°

Let the side AB be x

So , the adjacent side = x

The angle of the triangle ∠A is = 72°

So , θ = 72°

The hypotenuse AC = 8

And , by trigonometric relations , we get

cos θ = adjacent / hypotenuse

Substituting the values in the equations, we get

cos 72° = x / 8

Multiply by 8 on both sides, we get

x = cos 72° × 8

Now, cos 72° = 0.30901

Substituting the value of cos 72° , we get

x = 0.30901 × 8

x = 2.472

Thus, option B is correct.

For more information about trigonometric, click here:

https://brainly.com/question/19144330

#SPJ1

What is the tenacity of a mineral, and how can it be described? Tenacity is the mineral's resistance to breaking, bending, or otherwise deforming.

Answers

The tenacity of a mineral refers to its ability to resist breaking, bending, or deforming under stress.

It is a measure of the mineral's physical strength and durability. Different minerals have different tenacity, which can be described in various ways such as brittle, malleable, ductile, flexible, sectile, and elastic.

Brittle minerals are easily shattered or broken, while malleable minerals can be hammered or flattened into thin sheets. Ductile minerals can be stretched or pulled into wires, and flexible minerals can be bent without breaking.

Sectile minerals can be easily cut into thin shavings, and elastic minerals can deform under stress but return to their original shape when the stress is released. Understanding the tenacity of a mineral is essential in determining its properties and potential uses in various industries.

For more questions like Minerals click the link below:

brainly.com/question/11285252

#SPJ4

An angular distance measured north or south of the equator from the center of earth is termed
A) longitude. B) latitude. C) zenith. D) Greenwich distance.

Answers

Answer:

B

Explanation:

An angular distance measured north or south of the equator from the center of the Earth is called latitude. Latitude is used to specify a location's position on the Earth's surface relative to the equator. The equator is defined as 0° latitude, with latitudes increasing to 90° north or 90° south at the poles. Latitude is typically measured in degrees and is used along with longitude to determine a precise location on the Earth's surface.

How does Augustus's inscription
relate to the claims made in the first
passage?

Answers

Caesar Augustus, also known as Octavian, was the first Roman emperor; he reigned from 27 BC until he died in AD 14.

Who was Caesar Augustus?

The first Roman emperor, Caesar Augustus, often known as Octavian, ruled from 27 BC until they died in 14 AD. He is regarded as one of the greatest leaders in human history and is best known for founding the Roman Principate, the first stage of the Roman Empire.

Assassination schemes were not unfamiliar to Augustus. Thankfully, Augustus avoided the fate that befell his adopted father, Julius Caesar. At the age of 75, Augustus passed away naturally on August 19, 14 CE.

Learn more about Caesar Augustus here:

https://brainly.com/question/13153237

#SPJ1

2. The people of Cyprus have strong historical ties to
O Iran and Turkey.
O Israel and Iran.
O Yemen and Israel.
O Turkey and Greece.

Answers

the people of cyprus have a strong historical ties to turkey and greece

a break in the geologic record created when rock layers are eroded or when sediment is not deposited for a long period of time.

Answers

A gap in the geologic record, also known as an unconformity, is a break in the sequence of rock strata produced by erosion, non-deposition, or a combination of the two.

Unconformities might be erosional or non-depositional in nature. A record gap results from the erosion of rock strata, which is what causes an erosional unconformity. An unconformity that is not caused by sediment deposition does not result in the formation of new rock strata. There are several reasons for this, including a change in the temperature, a reduction in the sediment supply, or an increase in sea level.

Unconformities are significant identifiers in the geologic record because they allow geologists to estimate the age of the rocks in a specific location. They also provide us with hints about prior habitats and historical events.

To learn more about erosion visit:

https://brainly.com/question/13547502

#SPJ4

Explain why the human development gap index values given in figure 3 may be a better measure of development than any of the measures given in figure 2

Answers

The human development gap index values given in figure 3 may be a better measure of development than any of the measures given in figure 2 because these values capture the three critical aspects of life that include decent living, education, and a healthy life.

What is the difference between the HDI and the other markers?

The Human Development Index is designed to measure three critical markers of human lives. These include access to knowledge, a decent lifestyle, and the length/quality of their lives. These markers are more inclusive when compared to the other markers in figure 2 which include birth and death rate, life expectancy, and literary rate.

So, while all of these are considered individually in figure 2, figure 3 captures them as a single measure known as the Human Development Index.

Learn more about the Human Development Index here:

https://brainly.com/question/14391428

#SPJ1

what percentage of earth is covered in snow and ice?

Answers

Approximately 10% of the Earth's surface is covered in snow and ice.

This includes both permanent ice and snow cover, such as the polar ice caps, and seasonal snow cover, which varies depending on the time of year and location.

The majority of the Earth's permanent ice and snow is located in Antarctica and Greenland, which together hold about 99% of the world's ice. The remaining 1% of permanent ice and snow is found in mountainous regions around the world, such as the Himalayas, Andes, and Alps.

Seasonal snow cover is more widespread and occurs in regions with colder climates, such as in high latitudes and elevations. This snow cover typically melts during the warmer months and reaccumulates during the winter.

The amount of snow and ice cover on the Earth's surface can vary due to factors such as climate change and natural climate variability. The melting of glaciers and sea ice due to rising temperatures has become a significant concern in recent years, as it can lead to rising sea levels and other environmental impacts.

To learn more about Earth's surface, click here:

https://brainly.com/question/9382932

#SPJ4

how are fracture zones oriented relative to the axis of a mid-ocean ridge?

Answers

Fracture zones are orientated in relation to the mid-ocean ridge's axis because they run perpendicular to it.

A linear feature on the ocean floor called a fracture zone is created by the action of offset mid-ocean ridge axis segments. Fractures zones can be hundreds or even thousands of kilometres long. As a result of plate tectonics, they exist. When a transform fault is active, the lithosphere on each side of it shifts in the opposite direction; this is called strike-slip activity. Since both plate segments are moving in the same direction, the transform faults are seismically inactive, but fracture zones that extend past them provide signs of prior transform fault activity, particularly in the various ages of the crust on either side of the zone Although technically not "fracture zones," numerous transform faults linked with them are frequently regarded to informally as such.

learn more about fracture zones here:

https://brainly.com/question/9201304

#SPJ4

Individuals who opposed immigration to the United States because they
believed immigrants were inferior and threatened American culture were
known as:

Answers

Answer:

The term "nativist" is used to describe individuals who believe in the superiority of their own country and culture and who advocate for restrictive immigration policies.

Of the following, what is generally true regarding push factors?
Responses

They open up opportunity.

They are generally negative.


They are enticing.


They always involve international movement.

Answers

Answer:They are generally negative

Explanation:A push factor is what pushes somebody away from an area; the movement does not always have to be international, therefore, push factors are generally negative.

Push factors are generally involve international movement. Hence, option (b) can be considered as the relevant choice of answer.

Give a brief account on Human migration.

The movement of people with the intention of relocating, either temporarily or permanently, to a new location is referred to as human migration. Moving across great distances and from one country to another is common, but internal migration is also possible—in fact, it is the most common type of human migration worldwide. A second relocation may be made easier by the improved human capital that migration is frequently linked to, both at the individual and household levels, as well as through increased access to migratory networks. Studies have shown that migration is the most direct path out of poverty, and it has a significant potential to advance human development. Age has a role in migrating for both work and non-work reasons. Individuals, families, and big groups of people can all move. Migration can take the following four main forms: invasion, conquest, colonisation, and emigration/immigration.

To know more about, Human migration, visit :

https://brainly.com/question/23776144

#SPJ1

How did they first measure the circumference of the Earth?

Answers

Answer:

Measuring the Circumference of the Earth. More than 2,000 years ago Eratosthenes compared the position of the Sun's rays in two locations to calculate the spherical size of the Earth with reasonable accuracy. Eratosthenes was born in the Greek colony Cyrene, now the city of Shahhat, Libya.

Explanation:

city in arkansas where nine students integrate a public high school. what city is that?

Answers

The city is Little Rock, Arkansas, is a city where nine pupils attend a public high school.

The Little Rock, Arkansas, school board devised a strategy for the gradual integration of its schools in response to the Brown rulings and pressure from the neighbourhood NAACP branch. The high schools would be the first institutions to integrate, starting in September 1957.

The Little Rock Nine entered at Little Rock Central High School in the summer of 1957; the school had previously only had white students. The U.S. Supreme Court's ruling in Brown v. Board of Education (1954), which had ruled segregated schools to be unconstitutional, supported the students' effort to enrol. The altercation in Little Rock brought racism and civil rights in the United States to the attention of the world.

Learn more about Little Rock, Arkansas here:

https://brainly.com/question/16400969

#SPJ4

Rank the following steps describing how a clastic sedimentary rock forms from its pre-existing parent rock.
1. weathering
2. erosion
3. transportation
4. deposition
5. lithification

Answers

Weathering, erosion, transportation, deposition, and lithification are the five steps  how a clastic sedimentary rock forms from its pre-existing parent rock.

The five steps in the development of a clastic sedimentary rock from its pre-existing parent rock are eathering, erosion, transportation, deposition, and lithification.

The production of clastic sedimentary rocks begins with weathering. The breaking down of the parent rock into smaller fragments as a result of wind, water, and temperature changes is known as weathering.

The second stage of the development of clastic sedimentary rocks is erosion. Smaller fragments of the parent rock are removed from the surface during erosion and carried to new areas by the force of wind, water, and ice.

The third stage of the creation of clastic sedimentary rocks is transportation. Moving the smaller fragments of the parent rock from one place to another is referred to as transportation.

The fourth stage of the creation of clastic sedimentary rocks is deposition. Smaller fragments of the parent rock are deposited in a new area throughout the deposition process.

The fifth and last step in the production of clastic sedimentary rocks is lithification. Lithification is the process of compacting and cementing the tiny fragments of the parent rock to create a solid rock.

Learn more about sedimentary rock at :

brainly.com/question/10709497

#SPJ4

a formal region is defined: conceptually - typically in terms of feelings, attitudes and images. in terms of its interdependent parts that are typically linked to a central node. in terms of the uniformity or homogeneity of certain characteristics. by the national geographic

Answers

Option C is Correct. There is a formal area. when it comes to the uniformity or homogeneity of particular characteristics. A formal region is an area where a particular cultural or physical characteristic is highly consistent.

Formal regions are uniform, homogenous areas with a common language, climatic conditions, or political system that are shared by all residents. Functional regions are made up of a focal point and the areas that are impacted by it. People's attitudes and feelings toward areas help define perceptual regions.

Formal regions are clearly defined geographic areas that are united by a characteristic like a common language, culture, religion, or economic activity. Political borders, like the one separating the US from Canada, or natural boundaries, like a river or mountain, can serve as the definition of formal regions.

Learn more about formal region Visit: brainly.com/question/26245431

#SPJ4

Correct Question:

A formal region is defined:

A) In terms of its independent parts, typically tied to a central node

B) Conceptually, typically in terms of feelings, attitudes, and images

C) In terms of uniformity or homogeneity of certain characteristics

D) By the National Geographic Society.

what property of earthquakes does the richter scale measure? a. intensity. b. magnitude. c. damage and d. destruction caused by the earthquake.

Answers

Option b) magnitude  property of earthquakes does the richter scale measure

An earthquake (also known as a quake, tremor, or temblor) is the shaking of the Earth's surface caused by a sudden release of energy in the Earth's lithosphere, which produces seismic waves. Earthquakes can range in intensity from those that are so minor that they are not felt to those that are powerful enough to propel objects and people into the air, damage critical infrastructure, and devastate entire cities.

The frequency, type, and size of earthquakes experienced in a given area are referred to as its seismic activity. Seismicity at a specific location on Earth is defined as the average rate of seismic energy release per unit volume. Tremor is also used to describe non-earthquake seismic rumbling.

Learn more about  earthquakes

https://brainly.com/question/29500066

#SPJ4

state the favorable position of France

Answers

France is a country that is located in Western Europe and is known for its rich culture, history, and diverse geography. Some of the favorable factors that contribute to its position include:

Geographical location: France has a strategic location on the western coast of Europe, making it a central hub for trade and commerce. It has access to the Atlantic Ocean and the Mediterranean Sea, which allows it to be a major player in global maritime trade.
Strong economy: France has a strong and diversified economy, with a well-developed industrial sector and a thriving services sector. It is the sixth-largest economy in the world and a member of the European Union, which provides it with additional economic benefits.
Rich cultural heritage: France is home to some of the world's most famous landmarks and cultural heritage sites, including the Louvre Museum, the Eiffel Tower, Notre-Dame Cathedral, and the Palace of Versailles. This cultural heritage attracts millions of tourists each year, contributing significantly to the country's economy.
High quality of life: France is known for its high quality of life, with excellent healthcare, education, and social services. It is considered one of the most livable countries in Europe and offers a rich cultural experience to its citizens and visitors.
Overall, France's favorable geographical location, strong economy, rich cultural heritage, and high quality of life make it an attractive and desirable place to live, work, and visit.

what are the three major types of fault boundaries?

Answers

Divergent boundaries — where new crust is formed as the plates pull apart.

Convergent boundaries are formed when one plate dives beneath another.

Transform boundaries — where the plates slide horizontally past each other, neither producing nor destroying crust.

Two tectonic plates moving horizontally in opposite directions away from a divergent boundary form a transform fault. As the plates move against each other, they create a lot of friction. Because the crust is rough, it will become stuck and create pressure. When the pressure becomes excessive, the energy is released, resulting in an earthquake.

A transform fault is a strike-slip fault that connects two tectonic plates moving away from a divergent boundary in opposite directions. San Andres Fault, Alpine Fault, and North Anatolian Fault are a few examples.

Learn more about fault boundaries

https://brainly.com/question/1396155

#SPJ4

the jet stream is a global pattern of atmospheric movement that influences patterns in local weather. based on the information provided in the weather map, which city shown most recently experienced a drop in temperature?

Answers

The information provided in a weather map showing the jet stream can be used to identify which city has experienced a drop in temperature.  

The jet stream is typically depicted as a narrow band of strong winds at high altitudes, often shown in bright colors or bold lines on weather maps.The position and direction of the jet stream can have a major influence on local weather patterns, as it can carry cold or warm air masses from one region to another.When the jet stream is positioned over a particular region, it can cause temperatures in that area to drop.By analyzing the position and direction of the jet stream on a weather map, it is possible to determine which cities are likely to experience changes in temperature.If the jet stream is flowing from west to east, for example, then cities located to the west of the jet stream will generally experience warmer temperatures, while cities to the east will be cooler.If the jet stream is meandering or fluctuating, then the impacts on local temperatures can be more complex and difficult to predict.

learn more about jet stream here:

https://brainly.in/question/5511177

#SPJ4

Other Questions
Complete the sentence. Changes in normal __________ patterns hurt agricultural and pastoral communities. movement harvesting weather feeding As men progress through middle adulthood they experience a ________ sperm count and a ________ in testosterone level.a. decline in; decline inb. rise in; rise inc. stabilization in; decline ind. rise in; stabilization ine. decline in; rise in Solve the quadratic equation by the square root method and write the solutions in radical form. Simplify the solutions.(3x+20)2=125 given the list (xlsx, xls, xlr, txt, ods), what is the order of the elements after completing insertion sort's second outer loop iteration? Scatter plot, 8 grades help please!!! How much to believe of what the other party tells youA) depends on the reputation of the other party.B) is affected by the circumstances of the negotiation.C) is related to how he or she treated you in the past.D) is the dilemma of trust.E) All of the above For each transaction, determine the amount of revenue or expense, if any, that is recorded under accrual-basis accounting and under cash-basis accounting in the current period.1. Receive cash from customers in advance, $560.2. Pay utilities bill for the previous month, $130.3. Pay for insurance one year in advance, $1800.4. Pay workers' salaries for the current month, $760.5. Incur costs for employee salaries in the current month but do not pay, $960.6. Receive cash from customers at the time of service, $1500.7. Purchase office supplies on account, $290.8. Borrow cash from the bank, $3600.9. Receive cash from customers for services performed last month, $710.10. Pay for advertising to appear in the current month, $410. COMPARE Review paragraphs 27-31 and 54-66. Think about how George and Harrison respond to the handicaps imposed upon them Why are their responses so different ? Are there any similarities in responses ? Why or why not ? under the requirements of the usa patriot act, when opening an account for a non-resident alien, the registered representative must obtain which of the following from the customer? a united states passport number b united states social security number c foreign country passport number d foreign country tax identification number How will the weather change in the future due to climate change? which u.s. navy fighter squadron, based at naval air station oceana, is nicknamed the gunslingers?Strike Fighter Squadron 105Strike Fighter Squadron 999Strike Fighter Squadron 69 the power density at some distance from an isotropic antenna is calculated as 4 mw/m2. find the power density if the isotropic antenna is replaced by an antenna with 13 db gain. Which statement best describes an example of pollution?OA. The reservoir that supplies water to a desert town is low, causingthe local government to limit the amount of water people can use.OB. A fertilizer plant spilled toxic substances into a nearby lake,causing the number of fish in the lake to decrease.OC. A housing development cut down all the trees in a forest, causingmudslides that led to property damage.D. A city grows quickly along both sides of a major freeway, making itdifficult for citizens to travel between different parts of town.SUBMIT Please help me ASAP THANKS what structure is highlighted? right ventricle left auricle left ventricle right auricle superior vena cava Aaron launches a toy rocket from a platform. The graph below shows the height of therocket h in feet after t seconds. Find the interval for which the rocket's height isincreasing.Height (in feet)240220200180016014012010080604020(0, 180)(1, 196)(4.5, 0) the opponents of globalization argue that falling barriers to international trademultiple choice question.prevent countries from being interdependent on one another.reduce job opportunities in developing nations where wages are much lower.increase service jobs around the world.eliminate manufacturing jobs in wealthy economies. Taylor, a high school freshman, has been struggling recently with feeling overweight, being easily distracted and unfocused, and behind with schoolwork. Taylor is also having difficulty making new friends and fitting in at school. How could a counseling psychologist help Taylor overcome these issues?(This is more of a psychology question by the way.) If you had a child who wanted to be in a band or orchestra, how would you help him or her choose which instrument to play? What advice would you have for a child who wants to sing in the chorus? The circle graph describes the distribution of preferred music from a sample of 400 randomly selected middle school students.a circle graph titled preferred music, with five sections labeled rock 13 percent, hip hop 25 percent, pop 35 percent, classical 13 percent, and jazz 14 percentWhich of the following conclusions can we draw from the circle graph? Hip Hop is the preferred music for 25 students. Together, Pop and Jazz are the preferred music for over half the students. Classical is the preferred music for 52 students. Together, Rock and Hip Hop are the preferred music for 172 students.