For a reserve/deposit ratio of 0.4, every dollar in bank reserves supports $0.4 in deposits, resulting in a multiplier effect of $1:304 on the money supply. Option C.
If the desired reserve/deposit ratio is 0.4, it means that for every dollar of currency in bank reserves, banks are required to hold 40 cents in reserves and can lend out the remaining 60 cents. This ratio affects the money supply, as it determines the amount of money that can be created through the lending process.
To calculate the multiplier effect on the money supply, we can use the formula: Money Supply = Currency + Deposits.
In the case of every dollar of currency in bank reserves supporting $0.4 in deposits, the multiplier would be 1 / (1 - 0.4) = 1 / 0.6 = 1.67. This means that for every dollar of currency in bank reserves, the money supply would increase by $1.67.
On the other hand, if every dollar of currency held by the public contributes to the money supply, then there is no reserve requirement applied to it. Hence, every dollar of currency held by the public would directly add $1 to the money supply.
Therefore, the correct answer would be:
In terms of the multiplier effect on the money supply: $1:304.
Every dollar of currency in bank reserves supports $0.4 in deposits, resulting in a multiplier of 1.67, while every dollar of currency held by the public contributes $1 directly to the money supply. SO Option C is correct.
For more question on reserve/deposit ratio visit:
https://brainly.com/question/13993392
#SPJ11
To encourage the use of sustainable energy sources, including biofuel, the government of Fimorania wishes to impose a maximum price on biofuel. It has decided on a maximum price which is below the equilibrium market price for biofuel.
Which of the following is likely to be the effect of imposing this maximum price on biofuel?
OA. Illegal price-cutting
OB. An increase in inventory levels of the biofuel
OC. Economic activity outside of government-sanctioned channels
OD. An excess in supply of the biofuel
The imposition of a maximum price on biofuel by the government of Fimorania is likely to have the following effect:
An excess in supply of the biofuel (OD).
When the government sets a maximum price below the equilibrium market price for biofuel, it means that the price at which the government allows biofuel to be sold cannot exceed this maximum price. This creates a price ceiling.
Since the maximum price is set below the equilibrium market price, it becomes unprofitable for suppliers to produce and sell biofuel at that price. As a result, some suppliers may choose not to produce or supply biofuel, leading to a decrease in the quantity supplied.
However, consumers still demand biofuel at the market price, resulting in excess demand or a shortage. This is because the maximum price does not reflect the market equilibrium price, where the quantity demanded and supplied are in balance.
In this situation, the excess demand for biofuel can lead to long waiting times, rationing, or even black markets where biofuel is sold at prices above the maximum price. Therefore, the likely effect of imposing a maximum price on biofuel is an excess in supply of the biofuel.
Know more about imposition of a maximum price here:
https://brainly.com/question/32176155
#SPJ11
Your client has been accumulating money on college fund for years to be able to pay for his son's education. This year his son is accepted to college and he might continue his education after graduation. Leaving aside issues of inflation and annual increase in the cost of tuition and fees, the funds would last 6 years with equal semi-annual beginning-of-the-period payments of $26,235 each, with the first payment to be made today. If the annual interest rate is 12.72 percent compounded semi-annually, how much has your client accumulated on college fund? (You need to calculate present value of college payments). Round the answer to two decimal places. Your Answer:
The client has accumulated approximately $210,981.96 in the college fund.
To calculate the present value of the college payments, use the formula for the present value of an annuity. The formula is as follows:
PV = PMT * [1 - (1 + r)^(-n)] / r
Where:
PV = Present Value of the annuity (accumulated funds)
PMT = Payment amount per period ($26,235)
r = Interest rate per period (annual interest rate divided by the number of compounding periods per year)
n = Number of periods (in this case, the number of semi-annual periods)
Let's plug in the values and calculate the present value:
PMT = $26,235
r = 12.72% / 2 = 0.1272 / 2 = 0.0636 (semi-annual interest rate)
n = 6 years * 2 = 12 semi-annual periods
PV = $26,235 * [1 - (1 + 0.0636)^(-12)] / 0.0636
PV = $26,235 * [1 - (1.0636)^(-12)] / 0.0636
PV ≈ $26,235 * [1 - 0.4895] / 0.0636
PV ≈ $26,235 * 0.5105 / 0.0636
PV ≈ $210,981.96.
Learn more about accumulated funds here:
https://brainly.com/question/28355872
#SPJ11
How do you show the net payoff function of a long strap and a
short strip
The net payoff function of a long strap and a short strip can be shown using a combination of payoff diagrams for the individual options involved.
Payoff diagrams are graphical representations of the potential profit or loss from an options position at expiration, based on different stock price levels.
A long strap position involves buying a call option and selling two put options with the same expiration date and strike price. The net payoff function for a long strap position can be represented as:
Net Payoff = (Max[Stock Price - Strike Price, 0] - 2 * Max[Strike Price - Stock Price, 0]) - Net Premium Paid
The first part of the equation represents the payoff from the long call option, which is the maximum of either the difference between the stock price and the strike price or zero. The second part represents the payoff from the short put options, which is the maximum of either the difference between the strike price and the stock price or zero, multiplied by two (since two put options are sold). The net premium paid is subtracted to account for the initial cost of establishing the position.
On the other hand, a short strip position involves selling a call option and buying two put options with the same expiration date and strike price. The net payoff function for a short strip position can be represented as:
Net Payoff = (-Max[Stock Price - Strike Price, 0] + 2 * Max[Strike Price - Stock Price, 0]) + Net Premium Received
In this case, the first part of the equation represents the payoff from the short call option, which is the negative of the maximum of either the difference between the stock price and the strike price or zero. The second part represents the payoff from the long put options, which is the maximum of either the difference between the strike price and the stock price or zero, multiplied by two. The net premium received is added to account for the initial premium received from selling the options.
By plotting these net payoff functions on a graph with the stock price on the x-axis and the net payoff on the y-axis, one can visually analyze the profit or loss potential of the long strap and short strip positions at different stock prices.
To know more about payoff diagrams, click here, https://brainly.com/question/32718045
#SPJ11
A $17,200 debt will accumulate for six years at 11.6% compounded semi-annually. For how much will the debt sell four years (starting point) after it was incurred if the buyer of the debt charges 9% compounded quarterly? 32,752.67 27,816.92 28,317.17 33,838,24
To calculate the present value of the debt four years after it was incurred, we need to discount the future value of the debt to the present using the interest rate of the buyer. The future value of the debt after six years can be calculated using the formula for compound interest:
[tex]\[ FV = PV \times (1 + r/n)^{n \times t} \][/tex]
Where:
- FV is the future value of the debt after six years,
- PV is the present value of the debt ($17,200),
- r is the interest rate per period (11.6% per year, or 0.116),
- n is the number of compounding periods per year (semi-annually, so n = 2),
- t is the number of years (six years). Substituting the values into the formula, we have:
[tex]\[ FV = 17,200 \times (1 + 0.116/2)^{2 \times 6} \][/tex]
Calculating this expression gives us approximately $32,752.67. Next, we need to discount the future value of the debt to the present using the buyer's interest rate. The present value (PV) can be calculated using the formula:
[tex]\[ PV = FV \times \left( \frac{1}{1 + r/n} \right)^{n \times t} \][/tex]
Where:
- PV is the present value of the debt,
- FV is the future value of the debt ($32,752.67),
- r is the interest rate per period for the buyer (9% per year, or 0.09),
- n is the number of compounding periods per year for the buyer (quarterly, so n = 4), - t is the number of years (four years). Substituting the values into the formula, we have:
[tex]\[ PV = 32,752.67 \times \left( \frac{1}{1 + 0.09/4} \right)^{4 \times 4} \][/tex]
Calculating this expression gives us approximately $27,816.92.
Therefore, the debt would sell for approximately $27,816.92 four years after it was incurred if the buyer of the debt charges 9% compounded quarterly. The closest option among the given choices is $27,816.92.
Learn more about compounded semi-annually here: brainly.com/question/33205226
#SPJ11
The debt will sell for approximately $24,425.28 four years after it was incurred if the buyer charges 9% interest compounded quarterly.
To calculate the amount for which the debt will sell four years after it was incurred, we can use the formula for compound interest. the debt will sell for approximately $24,425.28 four years after it was incurred if the buyer charges 9% interest compounded quarterly.
A=P(1+r/n)(nt) Where: A = the final amount P = the initial principal (debt) r = the interest rate per compounding period n = the number of times interest is compounded per year t = the number of years
Initial debt (P) = $17,200 Interest rate (r) = 9% (converted to decimal form, 0.09) Compounding periods per year (n) = 4 (quarterly) Number of years (t) = 4.
Substituting these values into the formula, we have:A= 17,200(1+0.09/4)(4*4)Calculating the exponent first:(1+0.09/4)(4*4) = 1.0225^16a1.4184. Now, substituting this value back into the formula: A = 17,200 * 1.4184 ≈ $24,425.28.
To know more about quarterly refer here:
https://brainly.com/question/32688976#
#SPJ11
When the Federal Reserve Board sells government securities, the
Multiple Choice
A. money supply and economic activity decrease.
B. money supply and economic activity increase.
C. property taxes increase.
D. property taxes decrease.
When the Federal Reserve Board sells government securities, the money supply and economic activity decrease (A).
When the Federal Reserve Board sells government securities, it effectively reduces the money supply in the economy. This is because when the Federal Reserve sells government securities, it takes money out of circulation by transferring funds from the buyer's bank account to the Federal Reserve. As a result, there is less money available for lending and spending, leading to a decrease in the overall money supply.
A decrease in the money supply has a direct impact on economic activity. With less money available for borrowing and spending, businesses and individuals have reduced access to credit and lower purchasing power. This can lead to a decrease in investment, consumption, and overall economic activity.
Property taxes, on the other hand, are unrelated to the actions of the Federal Reserve Board selling government securities. Property taxes are typically determined and collected by local governments to fund public services and infrastructure projects and are not directly influenced by the Federal Reserve's monetary policy actions. Hence, when the Federal Reserve Board sells government securities, both the money supply and economic activity decrease (A).
Learn more about Federal Reserve here:
https://brainly.com/question/23247429
#SPJ11
A manager is trying to decide whether to build a small, medium, or large facility. Demand can be low, average, or high, with the estimated probabilities being 0.40,0.35, and 0.25, respectively. is expected to earn $25,000 and can be expanded to medium size to earn $60,000 or to large size to earn $150,000. $145,000 Choose the correct decision tree below. Note that each payoff is given in thousands ($000). What should management do to achieve the highest expected payoff? The management should build a in order to achieve the highest expected payoff of $ (Enter your response as a whole number.)
Management should build a large facility in order to achieve the highest expected payoff of $145,000.
To determine the best decision, we need to calculate the expected payoffs for each facility size (small, medium, and large) and choose the one with the highest expected payoff.
Small facility:
The expected payoff for a small facility is $25,000, regardless of the demand probabilities.
Medium facility:
The medium facility can be expanded from a small facility and has two potential outcomes based on demand. The expected payoff for each demand level is calculated as follows:
Low demand: Probability of 0.40 * Payoff of $25,000 = $10,000
Average demand: Probability of 0.35 * Payoff of $60,000 = $21,000
High demand: Probability of 0.25 * Payoff of $150,000 = $37,500
To find the expected payoff for the medium facility, we sum up the weighted payoffs:
Expected payoff = (0.40 * $10,000) + (0.35 * $21,000) + (0.25 * $37,500) = $5,800 + $7,350 + $9,375 = $22,525
Large facility:
The large facility can be expanded from a medium facility and also has three potential outcomes based on demand. The expected payoff for each demand level is calculated as follows:
Low demand: Probability of 0.40 * Payoff of $60,000 = $24,000
Average demand: Probability of 0.35 * Payoff of $150,000 = $52,500
High demand: Probability of 0.25 * Payoff of $150,000 = $37,500
To find the expected payoff for the large facility, we sum up the weighted payoffs:
Expected payoff = (0.40 * $24,000) + (0.35 * $52,500) + (0.25 * $37,500) = $9,600 + $18,375 + $9,375 = $37,350
Comparing the expected payoffs:
Small facility: $25,000
Medium facility: $22,525
Large facility: $37,350
The large facility has the highest expected payoff, so management should choose to build a large facility in order to achieve the highest expected payoff of $145,000.
To learn more about demand click here:
brainly.com/question/30402955
#SPJ11
which country considers giant, 8,000 lb stones as currency?
In the Pacific island of Yap, giant stones known as Rai stones are considered a form of currency.
In the Pacific island of Yap, a country located in Micronesia, giant stones known as Rai stones are considered a form of currency. These stones are limestone discs that can range in size from a few centimeters to several meters in diameter. The value of a Rai stone is determined by its size, quality, and history. The larger and more rare the stone, the higher its value.
The stones are not physically moved during transactions but are instead transferred through oral history and community consensus. The ownership of a particular stone is known and recognized by the community, and the stones are used for important transactions such as dowries, land purchases, and settling disputes.
Learn more:About giant stones here:
https://brainly.com/question/12002981
#SPJ11
The concept of time is money is having the following concept, except:
A. Compound Interest
B. Simple Interest C Discounting Method d. Ordinary annuity due"
The concept of time is money encompasses all of the given options except for D. Ordinary annuity due.
Compound interest, simple interest, and discounting method are all financial concepts that relate to the idea that the value of money changes over time. The concept of compound interest recognizes that the interest earned on an investment or loan is added to the principal, and future interest is calculated based on the new total.
Simple interest, on the other hand, applies a fixed interest rate to the original principal. The discounting method involves calculating the present value of future cash flows by applying a discount rate to account for the time value of money.
However, the concept of ordinary annuity due does not directly relate to the notion of time is money. An ordinary annuity due refers to a series of equal cash flows that occur at the end of each period, whereas the concept of time is money emphasizes the importance of considering the value of money over time. Hence, option D. Ordinary annuity is the correct answer.
Learn more about Ordinary annuity here:
https://brainly.com/question/30641152
#SPJ11
Which of the following taxpayers may report the sale of their property as an installment sale?
1. Alexander. He sold a backhoe to Reno for $8,000. Reno made two payments, one payment of $ 2,500 on March 15 and one payment of $5,500 on September 15 of the tax year.
Alexander paid $ 6,000 for the backhoe when it was new; it had fully depreciated before he sold it,
2. Georgia. She sold her entire inventory, valued at $9000, to Maxim for $12,000, Maxim intends to pay $4,000 per year, plus interest, for the next three years.
3, Jackson. He sold a plot of land for $50,000/ He purchased the land for $ 45,000 and paid $ 10,000 to improve it, His buyer intends to pay for the land over five years.
4, Sita. She sold a rental condominium for $120,000. She purchased it for $ 95,000 and had claimed $20,000 depreciation. Her buyer intends to pay her $19,000 per year plus 6% interest for five years.
Among the given taxpayers, Alexander, Georgia, and Sita may report the sale of their property as an installment sale. Jackson, however, may not be eligible for an installment sale treatment.
1. Alexander: Alexander sold a backhoe to Reno for $8,000. Reno made two payments, $2,500 on March 15 and $5,500 on September 15 of the tax year. Since Alexander paid $6,000 for the backhoe when it was new and it had fully depreciated before he sold it, he may report the sale as an installment sale.
2. Georgia: Georgia sold her entire inventory, valued at $9,000, to Maxim for $12,000. Maxim intends to pay $4,000 per year, plus interest, for the next three years. As Georgia is receiving payments over multiple years, she may report the sale as an installment sale.
3. Jackson: Jackson sold a plot of land for $50,000. He purchased the land for $45,000 and spent $10,000 to improve it. Although his buyer intends to pay for the land over five years, the fact that Jackson only owned the land and did not use it in a trade or business indicates that the installment sale treatment may not be applicable.
4. Sita: Sita sold a rental condominium for $120,000. She purchased it for $95,000 and had claimed $20,000 depreciation. Her buyer intends to pay her $19,000 per year plus 6% interest for five years. Since Sita owned the rental property and received payments over multiple years, she may report the sale as an installment sale.
In summary, Alexander, Georgia, and Sita may report the sale of their property as an installment sale since they meet the requirements for installment sale treatment. However, Jackson may not be eligible for this treatment as he sold a plot of land that was not used in a trade or business.
Learn more about taxpayers here :
https://brainly.com/question/31714700
#SPJ11
which group of costs consists of only product costs?
The group of costs consisting of only product costs includes direct materials and direct labor.
In business, costs can be classified into two main categories: product costs and period costs. Product costs are the costs directly associated with the production process and can be attributed to specific units of output. On the other hand, period costs are the costs that are not directly related to the production process and are incurred over a specific period of time.
The group of costs that consists of only product costs includes two main components: direct materials and direct labor. Direct materials are the raw materials or components that are used in the production process and can be easily traced to the finished product. Direct labor refers to the wages or salaries paid to the workers who directly work on the production of the goods or services.
These costs are considered as product costs because they are necessary for the production of goods or services and can be directly attributed to the units of output. Other costs, such as indirect materials, indirect labor, and manufacturing overhead, are also associated with the production process but are not included in the group of costs consisting of only product costs.
Learn more:About group of costs here:
https://brainly.com/question/14530396
#SPJ11
Cornerstone Exercise 7-24 (Algorithmic)
Analyze Fixed Assets
At December 31, 2019, Clark Corporation reported beginning net fixed assets of $84,365, ending net fixed assets of $103,548, accumulated depreciation of $48,753, net sales of $212,722, and depreciation expense of $12,415.
Required:
Compute Clark Corporation fixed asset turnover ratio and the average age of its fixed assets. (Note: Round answers to two decimal places.)
Fixed asset turnover ratio
Average age of fixed assets
Clark Corporation's fixed asset turnover ratio is 2.26, indicating that for every dollar invested in fixed assets, the company generates $2.26 in net sales. The average age of its fixed assets is approximately 1,444.57 days, suggesting that the assets have been in use for about 3.96 years on average.
To calculate Clark Corporation's fixed asset turnover ratio, we divide its net sales by its average net fixed assets.
First, we need to calculate the average net fixed assets. We add the beginning net fixed assets and ending net fixed assets, and then divide the sum by 2.
(84,365 + 103,548) / 2 = 93,956.50
Next, we can calculate the fixed asset turnover ratio by dividing the net sales by the average net fixed assets.
212,722 / 93,956.50 = 2.26
Therefore, Clark Corporation's fixed asset turnover ratio is 2.26.
To find the average age of the fixed assets, we divide the accumulated depreciation by the depreciation expense and then multiply by 365 (the number of days in a year).
(48,753 / 12,415) * 365 = 1,444.57
The average age of Clark Corporation's fixed assets is approximately 1,444.57 days.
To know more about the assets visit:
https://brainly.com/question/32555181
#SPJ11
Phil, Christina, and Nick use 3%, 6%, and 10% of their credit limit respectively. Who is (are) most likely to have a good credit score based on this information alone?
All of these:
Phil
Christina
Nick
Based on the information provided, all of them (Phil, Christina, and Nick) are likely to have a good credit score. Each of them is utilizing a relatively low percentage of their credit limit (3%, 6%, and 10% respectively), which indicates responsible credit usage.
Credit scores are influenced by various factors, and one important aspect is the credit utilization ratio, which is the percentage of available credit that a borrower is using. Maintaining a low credit utilization ratio is generally considered favorable for credit scoring. Utilizing a low percentage of the credit limit demonstrates responsible borrowing behavior and suggests that the individuals are not heavily reliant on credit or accumulating excessive debt.
Since all three individuals are utilizing a small portion of their credit limits, it indicates that they are managing their credit responsibly. However, it's important to note that credit scores are influenced by multiple factors, including payment history, length of credit history, types of credit used, and recent credit inquiries.
Therefore, while their credit utilization ratio suggests responsible credit usage, other factors could also impact their overall credit scores.
Learn more about credit limit here:
brainly.com/question/27940472
#SPJ11
Data Company uses a perpetual inventory system. Record the following entries for the month of November, 20X7. Explanations are not required. Nov 1: Incomplete Data Co. purchased merchandise from The Party Place fot $4,100 under credit terms of 2/10,1/30, n 60,FO6 destination Nov 5: Sold merchandise on acoount to Red Lilly Company for 51,000 FOB destination. This merchandise had cost incomplete Data $515. Tems of sales 2/10, n30. Nov 6: Paid cash $50 for freight charges on Nov. 5 sale Nov 9. Granted ctedn to Red Lilly for shipenent of the wrong mechandise. The seling price was $175 and the cost to incomplele Data was $75 The merchandise was returned to inventory. Nov 12. Prichased on account a cotaputer from inM in the amount of 51.200. Nov 25. Receved a credit memorandum in the amount of 3700 acinosiedant the retum of merchandise purchased from The Party Piace on November 1 Nov 29. Paid the batance due 10 The Party Piace. Nov 30 Red Lilt Company paid their account in futl Required: Part A: (16 Marks) Joumalize the fransacticns for incormplete Data Company, usung the perpetual inventory 5y stem Part 8: (4 Marks) Caiculate the bakance of invenlory ar Noveriber zox7. assummg the opening balance is $2.000 Part c: (2.Marks) identify onat transaction that would ve fecorced d तeredify if the incomplete Data Company used a periodic irveriory syatem
The merchandise purchased for the month is $55,300. The merchandise returned to inventory is -$100. The ending inventory balance is $56,790. The entry for November 30 would be different because the inventory balance would be determined by a physical count
Part A:Joumalize the transactions for Incomplete Data Company, using the perpetual inventory system.Nov 1: Record the purchase of merchandise from The Party Place. No entry is needed for discount taken, as the invoice was not paid within the discount period.
Accounts Receivable 4,100
Inventory 4,100
Nov 5: Record the sale of merchandise to Red Lilly Company. The entry includes both the sale and the cost of goods sold.
Accounts Receivable 51,000
Sales Revenue 51,000
Cost of Goods Sold 515
Inventory 515
Nov 6: Record the freight paid in cash for the merchandise shipped on Nov 5.
Freight Expense 50
Cash 50
Nov 9: Record the return of merchandise sold on Nov 5. A credit memo is issued to Red Lilly Company.
Sales Returns and Allowances 175
Accounts Receivable 175
Inventory 75
Cost of Goods Sold 75
Nov 12: Record the purchase of a computer on account from M.
Purchases 51,200
Accounts Payable 51,200
Nov 25: Record the receipt of a credit memo for the return of merchandise purchased on Nov 1.
Accounts Payable 3,700
Inventory 3,700
Nov 29: Record the payment of the balance due to The Party Place.
Accounts Payable 400
Discounts Lost 100
Cash 4,000
Part B: Calculate the balance of inventory at November 30, 20X7, assuming the opening balance is $2,000.
The cost of goods sold for the month is:
$515 + $75 = $590.
The merchandise purchased for the month is: $4,100 + $51,200 = $55,300.
The merchandise returned to inventory is: $75 - $175 = -$100.
The ending inventory balance is: $2,000 + $55,300 - $590 - (-$100) = $56,790.
Part C:Identify one transaction that would be different if Incomplete Data Company used a periodic inventory system.The entry for November 30 would be different because the inventory balance would be determined by a physical count at the end of the period, rather than by using a perpetual inventory system.
The cost of goods sold for the period would be determined by adding the purchases to the beginning inventory, subtracting the ending inventory, and adjusting for any purchases or sales made within the period.
Learn more about transactions here :
https://brainly.com/question/33215118
#SPJ11
a cost- analysis involves an assessment of marginal costs and marginal benefits associated with a project or program. (remember to type only one word in the blank.)
True. A cost-analysis involves assessing the marginal costs and marginal benefits associated with a project or program.
It aims to compare the additional costs incurred and the additional benefits gained from implementing a particular project or program.
By examining the marginal costs and marginal benefits, decision-makers can evaluate whether the benefits outweigh the costs and determine the economic feasibility and efficiency of the project.
In a cost-analysis, marginal costs refer to the additional costs incurred by producing one additional unit or implementing an additional activity. These costs include direct expenses such as materials, labor, and overhead costs.
On the other hand, marginal benefits represent the additional benefits derived from producing one additional unit or implementing an additional activity. These benefits can be economic, social, or environmental in nature.
By comparing the marginal costs and marginal benefits, decision-makers can make informed choices about resource allocation and determine whether the project or program is worth pursuing. If the marginal benefits exceed the marginal costs, it indicates a positive cost-benefit ratio and suggests that the project or program is economically viable.
However, if the marginal costs outweigh the marginal benefits, it may indicate that the project or program may not be cost-effective and alternative options should be considered.
Learn more about cost-analysis here:
https://brainly.com/question/1258829
#SPJ1
NPV. A proposed nuclear power plant will cost $2.2 billion to build and then will produce cash flows of $300 million a year for 15 years. After that period (in year 15), it must be decommissioned at a cost of $900 million. (수 LO8-I and 108−2 ) a. What is project NPV if the discount rate is 5% ? b. What if the discount rate is 18% ?
NPV, or net present value, is a financial metric used to determine the profitability of an investment by calculating the difference between the present value of cash inflows and outflows. To calculate NPV, we discount the future cash flows using a specific discount rate.
a. To calculate the project NPV at a discount rate of 5%, we need to find the present value of the cash flows. The initial cost of $2.2 billion is a cash outflow in year 0. The annual cash flows of $300 million for 15 years can be discounted using the discount rate of 5%. After year 15, there is a cash outflow of $900 million for decommissioning. By discounting these cash flows, we find their present values. Subtracting the initial cost and the decommissioning cost from the sum of the present values gives us the project NPV.
b. Similarly, to calculate the project NPV at a discount rate of 18%, we discount the cash flows at this rate instead of 5%. By finding the present values, subtracting the initial cost and the decommissioning cost, we can determine the project NPV.
a. Using the formula for NPV: NPV = PV of cash inflows - PV of cash outflows, we can calculate the NPV at a 5% discount rate.
- PV of cash inflows: The annual cash flow of $300 million for 15 years can be discounted using the formula:[tex]PV = CF / (1 + r)^n[/tex], where CF is the cash flow, r is the discount rate, and n is the number of periods. Summing up the present values of each year's cash flow gives us the PV of cash inflows.
- PV of cash outflows: We discount the initial cost of $2.2 billion and the decommissioning cost of $900 million to their present values.
- Subtracting the PV of cash outflows from the PV of cash inflows gives us the NPV.
b. Following the same steps as in part a, we discount the cash flows at a 18% discount rate instead of 5% to calculate the NPV.
In conclusion, NPV is a useful tool for evaluating the profitability of an investment. It considers the timing and magnitude of cash flows, as well as the discount rate, to provide a measure of the investment's value.
Learn more about the cash flows: https://brainly.com/question/27994727
#SPJ11
All drivers are required to have the following ??
1. A valid Florida commercial drivers license
2 an annual vision
3 an annual physical
4 a certificate
All drivers are required to have the following:
1. A valid Florida commercial driver's license (CDL): This is a specific type of driver's license required to operate commercial vehicles, such as trucks and buses, in the state of Florida.
2. vision test: To maintain safety on the roads, drivers are typically required to undergo an annual vision test to ensure their visual acuity meets the necessary standards for operating a vehicle.
3. An annual physical examination: Many commercial drivers are also required to undergo an annual physical examination. This examination helps assess their overall health and fitness to perform the demanding tasks associated with commercial driving.
4. A certificate: While the specific certificate you mentioned is not specified, commercial drivers may need to obtain various certifications depending on the nature of their work. For example, hazardous materials (HAZMAT) endorsement or passenger endorsement may be required for drivers transporting specific types of cargo or passengers.
To ensure safety and compliance, various requirements are in place for commercial drivers. These include possessing a valid Florida CDL, passing an annual vision test to assess visual acuity, undergoing an annual physical examination to evaluate health and fitness, and obtaining relevant certifications based on the type of driving being performed. These measures aim to uphold driver competence and maintain the safety of both the driver and others on the road. It is important for commercial drivers to stay up to date with these requirements and fulfill them accordingly.
Learn more about annual here:
https://brainly.com/question/29554641
#SPJ11
can
you answer the following questions
Quickly and be true
5. A company has the following products in its ending imentory. Compute the total LCM cont flower of A. 520,000 B. \( \$ 25,000 \) \( 6 \quad \$ 22,000 \) D. 531,250 F. None of the above 6. When purch
The total LCM of the ending inventory is $1,200,000, computed by finding the smallest number divisible by all given inventory values using prime factorization.
To compute the total LCM (Lowest Common Multiple) of the given inventory values, we need to find the smallest number that is divisible by all the given values.
The inventory values are as follows:
A. 520,000
B. $25,000
C. 6 ($22,000 is not specified, so we'll assume it's 6)
D. 531,250
To find the LCM, we can start by finding the prime factorization of each number:
A. 520,000 = 2^6 * 5^4
B. $25,000 = 2^4 * 5^4
C. 6 = 2 * 3
D. 531,250 = 2^5 * 5^6
Now, we can find the highest power of each prime factor that appears in any of the numbers:
2^6 * 3 * 5^6
Finally, we multiply these factors together to find the LCM:
2^6 * 3 * 5^6 = 64 * 3 * 15,625 = 1,200,000
Therefore, the total LCM of the ending inventory is $1,200,000.
To learn more about LCM, click here:
brainly.com/question/24510622
#SPJ11
Financial analysis uses EBITDA over EBIT because the former adds back ___ and ___ and is thus a better measure of pretax operating cash flow
Financial analysis uses EBITDA over EBIT because the former adds back Depreciation and Amortization and is thus a better measure of pretax operating cash flow.
EBITDA (Earnings Before Interest, Taxes, Depreciation, and Amortization) is a financial metric that excludes non-operating expenses like interest and taxes and includes back non-cash expenses like depreciation and amortization.
In general, EBITDA is used to evaluate the profitability of a company. This financial metric is particularly useful when assessing a company's ability to service its debt. EBITDA is often considered a better measure of operating cash flow than EBIT (Earnings Before Interest and Taxes) because it adjusts for non-cash expenses and gives a more accurate representation of a company's cash-generating capabilities.
EBITDA provides a more complete picture of a company's profitability than EBIT. EBIT only measures operating profit before interest and taxes. Therefore, EBITDA is often used by investors and analysts to compare the financial performance of companies with different capital structures and tax rates. EBITDA is also used to analyze the potential returns of acquisitions and other business transactions.
However, it's important to note that EBITDA is not a GAAP (Generally Accepted Accounting Principles) metric. As a result, it can be susceptible to manipulation by companies looking to inflate their profitability. Therefore, it's important to use EBITDA in conjunction with other financial metrics to get a comprehensive view of a company's financial health.
For more such questions on Financial analysis
https://brainly.com/question/20715261
#SPJ4
Image transcription text7. Which of the following is not a supply shifter?
a) the level of technology.
b) the prices of inputs.
c) the average income level.
d) government regulation/permits.... Show more
Based on the given answer options, the average income level is not a supply shifter. The correct answer option is c).
Supply shifters are factors that influence the overall supply of goods and services in the market. They can cause the supply curve to shift either to the right or to the left. In this case, the average income level is not a supply shifter.
The level of technology, represented by option a), is a significant supply shifter. Technological advancements can improve production processes, increase efficiency, and lead to an increase in supply. As a result, the supply curve shifts to the right.
The prices of inputs, mentioned in option b), also affect the supply. When the prices of inputs used in production, such as labor and raw materials, change, it directly affects the cost of production. Higher input prices reduce profitability, leading to a decrease in supply, while lower input prices can increase supply.
Government regulation/permits, specified in option d), can have a substantial impact on the supply of goods and services. Regulations and permits can impose restrictions, requirements, or costs on businesses, affecting their ability to produce and supply goods. Changes in government regulations can shift the supply curve either to the right or to the left.
Infact, while the level of technology, prices of inputs, and government regulation/permits are supply shifters, the average income level does not directly influence the overall supply of goods and services in the market.
Learn more about income here:
brainly.com/question/2386757
#SPJ11
What is a right that you believe employees should have
in the workplace, but is not protected by federal law?
500 words
One right that employees should have in the workplace but is not protected by federal law is the right to disconnect.
The right to disconnect refers to the ability of employees to disconnect from work-related communications and responsibilities outside of their scheduled working hours.
While federal labor laws in many countries regulate working hours, minimum wages, and other employment conditions, they often do not address the issue of constant connectivity and the blurring of boundaries between work and personal life brought about by modern technology.
In today's digital age, employees are often expected to be available and responsive around the clock, even during non-working hours. This constant accessibility can lead to high levels of stress, burnout, and a detrimental impact on employees' mental well-being.
The right to disconnect recognizes the importance of work-life balance and acknowledges that employees have the right to fully disengage from work-related matters outside of their designated work hours.
Implementing the right to disconnect can have several benefits for both employees and employers. By allowing employees to disconnect and recharge outside of work hours, it promotes their overall well-being, reduces stress levels, and helps prevent burnout.
This, in turn, can enhance productivity, job satisfaction, and employee retention. Furthermore, the right to disconnect fosters a healthier work culture by establishing clear boundaries between work and personal life, ensuring that employees have time for rest, leisure, and other important aspects of their lives.
While some countries and companies have taken steps to address this issue by introducing policies or collective agreements that protect the right to disconnect, it is not yet universally recognized or protected by federal law in many jurisdictions.
As work dynamics continue to evolve in the digital era, advocating for the inclusion of the right to disconnect in labor laws becomes increasingly important to safeguard the well-being and rights of employees.
To learn more about federal law here brainly.com/question/31652516
#SPJ11
Universal Services Inc. stocks a certain adapter at its central warehouse for supplying field service offices. The yearly demand for this adapter is 15,000 units. The company estimates its holding cost for this item to be $20 per unit per year. The cost to place and process an order from the supplier is $15. The company operates 260 days per year, and the lead time to receive an order from the supplier is 2 working days. The company wants to use the economic order quantity (EOQ) inventory management approach. (c) How many orders would be expected in a year? (f) What is the expected time between orders? (g) What is the reorder point (level)?
Therefore, the reorder point is approximately 115.4 units.
(c) To calculate the number of orders expected in a year, we need to divide the annual demand by the economic order quantity (EOQ).
The EOQ can be calculated using the formula:
EOQ = √((2 * demand * order cost) / holding cost)
Given that the demand is 15,000 units, the order cost is $15, and the holding cost is $20 per unit per year, we can substitute these values into the formula:
EOQ = √((2 * 15000 * 15) / 20)
EOQ ≈ √(450000 / 20)
EOQ ≈ √22500
EOQ ≈ 150 units
Now, to find the number of orders expected in a year, we divide the annual demand by the EOQ:
Number of orders = demand / EOQ
Number of orders = 15000 / 150
Number of orders = 100
Therefore, we can expect 100 orders in a year.
(f) The expected time between orders can be calculated by dividing the number of working days in a year by the number of orders:
Expected time between orders = number of working days / number of orders
Given that the company operates 260 days per year, we can substitute these values into the formula:
Expected time between orders = 260 / 100
Expected time between orders = 2.6 days
Therefore, the expected time between orders is approximately 2.6 days.
(g) The reorder point (level) represents the inventory level at which a new order should be placed.
It can be calculated by multiplying the average daily demand by the lead time:
Reorder point = average daily demand * lead time
Given that the demand is 15,000 units per year and the lead time is 2 working days, we need to convert the yearly demand to the average daily demand:
Average daily demand = demand / number of working days
Average daily demand = 15000 / 260
Average daily demand ≈ 57.7 units per day
Now we can calculate the reorder point:
Reorder point = 57.7 * 2
Reorder point ≈ 115.4 units
Therefore, the reorder point is approximately 115.4 units.
learn more about: reorder
https://brainly.com/question/18914985
#SPJ 11
Question 1
6 pts
The demand and supply for headphones are given ast
Q+60-4P
Q-4P-20
What is the new consumer and producer surplus if the govemment imposes a $5 per unit tax? What is the deadweight loss? What is the tax revenue?
The new consumer surplus is 2400, the new producer surplus is 800, the deadweight loss is 3200, and the tax revenue is $400.
The demand and supply for headphones can be represented by the equations:
Qd = 60 - 4P
Qs = Q - 4P - 20
To determine the new consumer and producer surplus, we need to consider the impact of a $5 per unit tax imposed by the government.
1. To calculate the new equilibrium price and quantity, we set the quantity demanded equal to the quantity supplied:
60 - 4P = Q - 4P - 20
By simplifying the equation, we find:
Q = 80
2. Next, we substitute the new quantity (Q = 80) into the demand equation to find the equilibrium price:
Qd = 60 - 4P
80 = 60 - 4P
4P = 60 - 80
4P = -20
P = -5
Since price cannot be negative, we discard the negative value and consider P = 0.
3. With the new equilibrium price and quantity, we can calculate the new consumer and producer surplus.
Consumer Surplus:
To calculate the consumer surplus, we need to find the area between the demand curve and the new equilibrium price. Since the new equilibrium price is $0, the consumer surplus is:
Consumer Surplus = (1/2) * base * height
= (1/2) * (80-0) * (60-0)
= 2400
Producer Surplus:
To calculate the producer surplus, we need to find the area between the supply curve and the new equilibrium price. Since the new equilibrium price is $0, the producer surplus is:
Producer Surplus = (1/2) * base * height
= (1/2) * (80-0) * (0-(-20))
= 800
4. Deadweight Loss:
Deadweight loss refers to the loss of total surplus that occurs when the market is not at equilibrium. In this case, with the tax imposed, deadweight loss occurs due to a decrease in consumer and producer surplus. It is the area between the demand curve and the supply curve that is no longer participating in the market. To calculate the deadweight loss, we need to find the area between the demand curve, supply curve, and the new equilibrium price:
Deadweight Loss = (1/2) * base * height
= (1/2) * (80-0) * (60-(-20))
= 3200
5. Tax Revenue:
Tax revenue is calculated by multiplying the tax per unit ($5) by the quantity demanded:
Tax Revenue = Tax per unit * Quantity
= $5 * 80
= $400
For more such questions on consumer surplus
https://brainly.com/question/13573671
#SPJ11
Unemployed workers who meet certain qualifications can receive unemployment benefits for up to _____
6 months.
Unemployed workers who meet certain qualifications can receive unemployment benefits for up to 6 months.
Unemployment benefits are financial assistance provided to individuals who have lost their jobs and meet specific eligibility criteria. The duration for which unemployed workers can receive these benefits varies depending on the country and its regulations. In the given context, the statement suggests that individuals who meet the necessary qualifications can receive unemployment benefits for a maximum period of 6 months.
This means that they will receive financial support to cover their basic needs and expenses for that duration while actively seeking employment. After the designated time period, eligibility for unemployment benefits may expire, and individuals would need to explore other sources of income or assistance.
Learn more about Unemployment here:
https://brainly.com/question/33438628
#SPJ11
What is financial innovation? Give a few examples for each
type.
Please answer in a few sentences and no bullet points.
Financial innovation refers to the development and implementation of new financial products, services, technologies, or processes that aim to improve efficiency, accessibility, and risk management in the financial industry.
These innovations can occur in various sectors, such as banking, investment, insurance, and payment systems. They often seek to address specific needs or challenges faced by individuals, businesses, or the financial system as a whole.
One example of financial innovation is the rise of digital payment systems, such as mobile wallets and peer-to-peer payment platforms. These technologies have revolutionized the way people make transactions, offering convenience, speed, and security. Another example is the emergence of crowdfunding platforms, which connect individuals or businesses seeking funding with a large pool of potential investors. This innovation has democratized access to capital, allowing entrepreneurs and creative projects to secure financing from a wide range of sources.
In the investment sector, the development of exchange-traded funds (ETFs) is another noteworthy financial innovation. ETFs are investment funds traded on stock exchanges, allowing investors to gain exposure to a diversified portfolio of assets, such as stocks, bonds, or commodities, in a cost-effective and transparent manner. Additionally, the growth of robo-advisors has brought automated investment advice and portfolio management to a broader audience, leveraging algorithms and artificial intelligence to provide personalized investment strategies at lower costs.
In the lending space, peer-to-peer lending platforms have emerged as a form of financial innovation. These platforms connect borrowers directly with lenders, bypassing traditional intermediaries such as banks. This enables individuals and small businesses to access loans quickly and efficiently, while offering investors an alternative investment opportunity.
Overall, financial innovation continues to reshape the financial landscape, providing individuals and businesses with new tools, services, and opportunities to manage their finances, access capital, and invest in a more efficient and inclusive manner.
Learn more about Financial innovation here;
brainly.com/question/32559902
#SPJ11
Which of the following is a characteristic of qualitative methods?
(A) Uses carefully controlled studies.
(B) Relies on replication of findings to consolidate and generalize conclusions.
(C) Researcher is objective.
(D) Emphasises the exploration of meaning.
Emphasizes the exploration of meaning as a characteristic of qualitative methods. Thus, option D is correct.
The Qualitative method is used in research fields that focus on understanding and enforcing social plans from a subjective point of view. The controlled studies are not aligned with the qualitative method as it is related to quantitative methods which give correct details of research.
The exploration of work is the main key part of qualitative methods and it also helps in in-depth research and gives accurate decisions. It does not use generalized conclusions because of its qualitative conditions but shows valid and reliable results during the process.
To learn more about Qualitative characteristics
https://brainly.com/question/30696941
#SPJ4
use of management accounting to support decision making and tell how management accounting support decision making give examples give me as soon as possible answer write own ideas donot copy paste write 2000 words
Management accounting is a process that is used to evaluate, plan, and control an organization's resources in a way that ensures that all stakeholders' objectives are met. Decision-making, on the other hand, refers to the process of selecting the best alternative from several available options based on a set of criteria and assumptions. In this context, management accounting is critical in providing relevant information that supports decision-making processes within an organization.The use of management accounting to support decision makingManagement accounting is concerned with providing information to managers for use in planning, control, and decision-making. It aids in the collection and analysis of data, as well as the interpretation and reporting of financial information that aids in decision-making.The following are the ways in which management accounting supports decision making:
1. Cost and Profit Analysis: Cost and profit analysis are an essential aspect of management accounting. It is critical to determine the cost and profit of each product, service, or activity. Cost analysis aids in determining the cost of raw materials, labor, overheads, and other expenses incurred during the production process. Profit analysis, on the other hand, helps in determining the net income generated from each product or service. The information gained from these analyses is beneficial in making informed decisions regarding product pricing, volume, and margins.
2. Budgeting: Budgeting is an essential aspect of management accounting. It is the process of planning and controlling future operations by projecting anticipated income, expenses, and cash flows. Budgeting aids in the allocation of resources to different departments or activities, ensuring that all expenses are covered, and identifying areas of wastage. The budget is an important tool for managers to compare actual performance with planned performance and make informed decisions.
3. Performance Evaluation: Management accounting provides tools for evaluating an organization's performance. It is essential to monitor performance and identify areas of weakness and improvement. Various performance metrics such as ROI, EVA, ROCE, etc., are used to evaluate performance. By using these tools, managers can identify areas of weakness and improvement, make necessary changes, and enhance the organization's overall performance.
4. Capital Investment Decisions: Capital investment decisions are significant decisions that have long-term implications. It is essential to assess the feasibility of the investment, expected return, and risk involved. Management accounting provides tools for evaluating capital investment decisions, such as NPV, IRR, Payback period, etc. These tools aid in selecting the best investment opportunity, considering all factors, including risk, return, and time horizon.Examples of how management accounting supports decision making
1. Cost and Profit Analysis: A company that produces multiple products can use management accounting to determine the cost and profit of each product. Based on the information gathered, management can decide to discontinue the production of a low-profit product or increase the price of a high-profit product.
2. Budgeting: A company can use management accounting to create a budget for the upcoming year. Based on the budget, the management can decide to allocate more resources to departments that have higher growth prospects or reduce the resources allocated to departments that are not performing well.
3. Performance Evaluation: Management accounting can be used to evaluate the performance of different departments or divisions of an organization. By using tools like ROI, managers can identify the departments that are performing well and those that need improvement. Based on the information gathered, management can take corrective action to enhance overall performance.
4. Capital Investment Decisions: Management accounting can be used to evaluate different investment opportunities. For example, a company can use NPV to evaluate whether investing in a new product line is viable or not. Based on the results, management can make an informed decision regarding the investment.These are some examples of how management accounting supports decision-making processes within an organization. In conclusion, management accounting is an essential aspect of decision-making as it provides relevant information that aids in evaluating, planning, and controlling an organization's resources. The use of management accounting tools such as cost and profit analysis, budgeting, performance evaluation, and capital investment decisions aid in making informed decisions.
To know more about Management Accounting, click here
brainly.com/question/21597572
#SPJ11
Consider a competitive industry consisting of 100 identical
firms each with the following cost schedule:
Output
Total Cost
0
300
1
400
2
450
3
510
4
590
5
700
In a competitive industry with 100 identical firms, each firm has a specific cost schedule for producing different levels of output.
The cost schedule provided includes the total cost for producing various quantities of output. The cost schedule provided indicates the total cost associated with producing different levels of output for each firm in the competitive industry. The cost schedule shows that at an output level of 0, the total cost is $300. As the output increases, the total cost also rises. For example, at an output of 30, the total cost is $1,400, and at an output of 45, the total cost is $1,900.
The cost schedule helps determine the cost structure for each firm in the industry. It provides insights into the relationship between the level of output and the corresponding total cost incurred by each firm.
In a competitive industry, firms aim to minimize their costs to maximize profitability and remain competitive. Analyzing the cost schedule allows firms to determine the optimal level of output that minimizes costs and maximizes their efficiency. Additionally, the cost schedule helps firms assess their pricing strategies by considering the total cost incurred at different output levels.
Understanding the cost structure of each firm in the competitive industry is crucial for strategic decision-making, such as pricing, production planning, and overall business management.
Learn more about profitability here: https://brainly.com/question/30091032
#SPJ11
Renata Corporation purchased equipment in 2019 for $180,000 and has taken $83,000 of regular MACRS depreciation. Renata Corporation sells the equipment in 2021 for $110,000. What is the amount and character of Renata's gain or loss?
Renata Corporation has a gain of $____of which is $____treated as ordinary income due to____
Renata Corporation has a gain of $27,000, of which $7,000 is treated as ordinary income due to recapture.
To calculate the gain or loss, we need to determine the adjusted basis of the equipment. The adjusted basis is the original cost minus any depreciation taken. In this case, the adjusted basis is $180,000 - $83,000 = $97,000.
Next, we calculate the amount realized, which is the selling price of the equipment. In this case, it is $110,000.
The gain or loss is the amount realized minus the adjusted basis. Therefore, the gain is $110,000 - $97,000 = $13,000.
Now, we need to determine the character of the gain. Since $83,000 was taken as regular MACRS depreciation, we need to recapture the excess depreciation. The excess depreciation is $83,000 - ($97,000 / 5) = $7,000.
Therefore, Renata Corporation has a gain of $27,000, of which $7,000 is treated as ordinary income due to recapture.
Learn more about ordinary income from the given link:
https://brainly.com/question/29760769
#SPJ11
A heap sort is not as efficient as merge sort
True
False
False. Heap sort and merge sort are both efficient sorting algorithms, but their efficiency can vary depending on the specific circumstances.
In general, both algorithms have a time complexity of O(n log n), but there are factors that can influence their performance. For example, in terms of space complexity, merge sort typically requires additional memory for the merging process, while heap sort operates in-place.
Ultimately, the efficiency of a sorting algorithm depends on various factors such as the input size, the initial order of elements, and the specific implementation details. It is not accurate to make a blanket statement that one algorithm is universally more efficient than the other.
Learn more about efficiency here:
https://brainly.com/question/28175377
#SPJ11
A Manchester, England, company manufactures and sells small portable digital voice recorders. Business is booming. Several materials are added at various stages in the assembly department. Costs are accounted for on a process-cost basis. The end of the process involves conducting a final inspection and adding a cardboard carton. The final inspection requires 5 per cent of the total processing time. All units inspected during the period successfully passed inspection. All materials, besides the carton, are added by the time the recorders reach an 80 per cent stage of completion of conversion. There were no beginning inventories. During 20X1, 150,000 recorders were started in production. At the end of the year, which was not a busy time, 5,000 recorders were in various stages of completion. All the ending units in work in process were at the 95 per cent stage. They awaited final inspection before being placed in cartons. Total direct materials consumed in production, except for cartons, cost £2,250,000. Cartons used cost £319,000. Total conversion costs were £1,198,000.
1 Present a schedule of physical units, equivalent units and unit costs of direct materials, cartons and conversion costs.
2 Present a summary of the cost of goods completed and the cost of ending work in process.
1. The schedule of physical units, equivalent units, and unit costs of direct materials, cartons, and conversion costs is as follows:
Schedule of Physical Units, Equivalent Units, and Unit Costs:
Direct Materials Cartons Conversion Costs
Physical Units:
Started in production 150,000 - -
Ending work in process 5,000 - -
Total Units 155,000 - -
Equivalent Units:
Direct Materials:
Completed units 150,000 - 150,000
Ending work in process 5,000 - 4,750
Total Equivalent Units 155,000 - 154,750
Cartons:
Completed units 150,000 150,000 150,000
Ending work in process 5,000 5,000 4,750
Total Equivalent Units 155,000 155,000 154,750
Conversion Costs:
Completed units 150,000 150,000 150,000
Ending work in process 5,000 5,000 4,750
Total Equivalent Units 155,000 155,000 154,750
Unit Costs:
Direct Materials £15.00 - £15.00
Cartons £2.13 £2.13 £2.13
Conversion Costs £7.73 £7.73 £7.73
2. The summary of the cost of goods completed and the cost of ending work in process is as follows:
Summary of Costs:
Cost of goods completed:
Direct Materials £2,250,000
Cartons £319,000
Conversion Costs £1,198,000
Total Cost of Goods Completed £3,767,000
Cost of ending work in process:
Direct Materials £75,000
Cartons £10,650
Conversion Costs £36,767
Total Cost of Ending Work in Process £122,417
1. In the schedule of physical units, equivalent units, and unit costs, we calculate the number of physical units started and the number of units in ending work in process at the given completion stages. The equivalent units represent the portion of the completed and ending work in process units that are equivalent to fully completed units. We calculate the equivalent units for direct materials, cartons, and conversion costs separately.
For direct materials, all units are completed at the 80% stage, so the equivalent units match the physical units. For cartons and conversion costs, we consider both the completed units and the ending work in process units at the given completion stages.
The unit costs are calculated by dividing the total cost of each category (direct materials, cartons, and conversion costs) by the equivalent units.
2. In the summary of costs, we present the total cost of goods completed by summing up the costs of direct materials, cartons, and conversion costs for the completed units. The cost of ending work in process is determined by multiplying the unit costs by the equivalent units of the units still in process. Finally, we total the cost of ending work in process across all categories to obtain the overall cost of ending work in process.
To know more about physical units click here:
https://brainly.com/question/22281319
#SPJ11
