The armature of a 4-pole series dc generator has 40 slots, with 10 conductors per slot. There are 4 parallel paths in the armature winding. Every pole of the stator produces a flux of 0. 02 wb. Internal resistance of the generator is 5 ω. The generator is coupled to an internal combustion gasoline engine that provides an input torque of 10 n. M. And runs the generator at a speed of 1200 rpm. The electrical load connected to the generator draws a current of 10 a. A. What is the voltage available at the generator terminals? b. How much power is drawn by the load? c. What is the generator efficiency?.

Answers

Answer 1

The generator efficiency is 60.19%

What is generator efficacy?

The efficiency of the generator and overall efficiency A generator is a device that converts mechanical energy to electrical energy. The generator efficiency, the ratio of electrical power output to mechanical power input, characterizes a generator's performance. However, no electric motor is actually 100 percent efficient. Heat, noise, and the creation of products like carbon dioxide all result in energy loss. A generator is 70% efficient if it produces 700 watts out of a 1000 watt generator.

Efficiency = (Pout/Pin)x100%
= (756/1256)x100%
=60.19%

hence, the efficacy of the generator is 60.19%.

To learn more about the generator efficacy the link is given below:

https://brainly.com/question/25098342?

#SPJ4


Related Questions

What net force is necessary to accelerate a 300 kg object at 3m.s^-2?

Answers

Answer:

900 N

Explanation:

Simple to remember formula:

F = m * a

  = 300 * 3  = 900  N

the cessna cardinal, a single-engine light plane, has a wing area of 16.2 m2 and an aspect ratio of 7.31. assume the span efficiency factor is 0.62. if the airplane is flying at standard sea-level conditions with a velocity of 300 km/h, what is the induced drag when the total weight is 9800 n?

Answers

The induced drag coefficient of the plane is 0.0067

What is induced drag?

In aerodynamics, drag caused by lift, induced drag, vortex drag, or drag due to lift is the aerodynamic drag that occurs when a moving object redirects the airflow coming over it.

Given,

Weight (w) = 9800 N

Wing area (A) = 16.2 m²

Span efficiency factor (E) = 0.62

Zero-lift drag coefficient (CD0) = 0.03

Velocity (v) = 725 km/h = 300 km/h or 83.34 m/s

Density of air (p) = 1.225 kg/m³

Aspect ratio (AR) = 7.31

W = ¹/₂ pv²×A×Cl

Cl = lift coefficient    

Cl = 2w/pARv²

Cl = 2×9800/1.225×7.31×83.34²

Cl = 0.31

Coefficient of induced drag (Cdi) = Cl²/π×E×AR

Cdi = 0.31²/3.14×0.62×7.31

Cdi = 0.0067

To know more about induced drag visit:

https://brainly.com/question/10121475

#SPJ4

Please help I’ll give points crown and thanks very argent Thank you

Answers

Answer:

See below

Explanation:

1A 2D 3B 4C

You push a lawn mower across a level yard at constant velocity. You exert a
force of 75 N along the handle that makes a 43° angle with the horizontal.
What is the force of friction between the mower and the ground?

Answers

Answer:

Explanation:

11.535 newtons

what type of x-ray machine includes pieces of high-resolution fixed x-ray equipment that allow physicians to diagnose and perform surgery in a minimally invasive manner?

Answers

Standard computed tomography X-rays are a type of x-ray machine that includes pieces of high-resolution fixed x-ray equipment that allow physicians to diagnose and perform surgery in a minimally invasive manner.

X-ray imaging equipment includes X-ray machines. Since many years ago, X-rays, a type of electromagnetic radiation, have been employed in the medical industry. With the help of this technology, we have been able to see images of our internal organs, including the heart, lungs, and even bones. Electromagnetic radiation such as X-rays can reflect off a variety of materials. Some substances have a high density, whilst others have a low density.

Standard computed tomography X-ray machines are employed for airport security as well as in the medical industry.

These X-rays can image a variety of body areas, including bones, skin, lungs, and the heart, due to their strong X-ray radiation power. Additionally, CT scans are frequently used in X-rays to image organs like the brain that are invisible to traditional X-rays.

Learn more about X- rays here:

https://brainly.com/question/2833441

#SPJ4

A line that intersects two or more lines in a plane at different points is called a?.

Answers

Answer:

transversal

Explanation:

or transverse line

Suppose a pv farm requires 2,000 panels to generate power at 40% efficiency. If a new panel were invented that was 50% efficient, how many panels would be required?.

Answers

The number of panels required when the efficiency of the machine changes to 50% is 1,600 panels.

What is the efficiency of a machine?

The efficiency of a machine or any device is the measure of the ratio of the output energy or output work of the machine or device to the input work or energy of the device.

The efficiency of the PV farm describes how well it converts solar energy from the sun into useful energy.

The smaller the number of panels required by the PV farm, the more efficient the PV farm is and vice versa.

The number of panels required when the efficiency of the machine changes is calculated as follows;

40% ------> 2,000 panels

50% --------> ?

= (40 x 2000) / 50

= 1,600 panels

Learn more about efficiency here: https://brainly.com/question/15418098

#SPJ1

How do you find the frequency of a radio wave with wavelength?.

Answers

The frequency of a radio wave with a wavelength: Frequency of oscillation x wavelength = speed of light

If we have other measurements we can use this relationship to find the wavelength or frequency of the electromagnetic wave. Just divide the speed of light by the measurement you have and you'll get the other.By counting the number of wavefronts that pass a fixed point in a second or so, you can measure the frequency of a wave.

The higher the number the higher the wave frequency. Natural sources of radio waves include astronomical radio sources in space, such as the sun, galaxies, and nebulae as well as radio noise generated by lightning and other natural processes in the Earth's atmosphere. All warm objects radiate high frequency radio waves as part of their black body radiation.

Learn more about A radio wave here:-https://brainly.com/question/69373

#SPJ4

The specific volume of a substance is the volume per gram of substance. It is an example of.

Answers

Using the concepts of Extensive and Intensive Properties, we got The specific volume of a substance is the volume per gram of substance. It is an example of physical extensive property.

Physical characteristics of matter are classified into two types: intense properties and extended properties.

An extensive property is a property that is affected by the amount of materials in a sample. Mass and volume are the two examples of extensive characteristics. An intense property is a property of matter that is determined only by the kind of matter in a sample and not by its quantity.

All the specific properties are extensive properties. It can be understood with the example of a specific volume, which is defined as the volume per gram of substance. Therefore, it includes mass.

Thus, it is an extensive property.

Hence, The specific volume of a substance is the volume per gram of substance. It is an example of physical extensive property.

To know more about Extensive and Intensive Properties, visit here:

brainly.com/question/17323212

#SPJ4

Two carts, a and b, are connected by a rope 39 ft long that passes over a pulley p. Two carts on a horizontal surface are connected by a rope that passes over a pulley. The distance between the pulley p and the point q on the horizontal surface is 12 ft. Cart a is to the left of point q, and cart b is to the right of point q. Both carts are traveling from right to left. The point q is on the floor 12 ft directly beneath p and between the carts. Cart a is being pulled away from q at a speed of 4 ft/s. How fast (in ft/s) is cart b moving toward q at the instant when cart a is 5 ft from q? (round your answer to two decimal places. ).

Answers

The velocity of cart B is 1.73 ft/sec moving towards Q at instant when cart A is 5 ft away from Q .

We have given in question that,

length of rope (l) = 39 ft

the distance between pully point P and horizontal point Q = 12 ft

velocity of cart A = 4 ft/sec

let a = position of cart A relative to Q =0

b = position of cart B relative to Q =0

we want to find out value of db/dt when a = 5 ft .

da/dt = velocity of cart A = 4 ft/sec

Now, consider right angle triangle PQB,

(PB)² = 12² + b² ---(1)

(PA)² = 12² + a² (right angle triangle PQA)

39 = (PA)² + P² = √144+b² + √ 144+a²

so, 39 = √144+b² + √144+ a² ---(2)

differenating equation (2) with respect to time t

we get,0 = b/√144+b² × db/dt + a/√144+a² ×da/dt -----(3)

from equation (2) put a = 5 (given)

39 = √144+b² + √144+25 = 13 + √144+b²

144 + b² = (39-13)² = 676 => b² = 532

=> b = +√532 , b= -√532 but b is on negative side of Q= 0 so, b = -√532

Now, putting value of b, a, da/dt in equation (3)

0 = (-√532 /√144+532 )× db/dt + (5√144+25 )× 4

=> 0 = (-√532/26) × db/dt + 20/13

=> db/dt = ( 20/13 )(26/√532) = 40/√532

= 1.73 ft/sec

Hence , the velocity of cart B moving towards Q is 1.73 ft/sec when cart A is 5 ft away from point Q.

To learn more about Cart problem, refer:

https://brainly.com/question/13304643

#SPJ4

The random variable x is known to be uniformly distributed between 70 and 100. The probability of x having a value between 80 to 95 is.

Answers

The probability density function (pdf) for the uniform distribution has the basic formula: f(x) = 1/ (B-A) for A x B.

A continuous probability distribution, the uniform distribution is concerned with equally likely outcomes. It is referred to as having a rectangular distribution on the interval [a,b] or having a uniform distribution for the continuous random variable X. Above is a representation of the probability density function of a continuous uniform distribution. The probability of drawing a heart, club, diamond, or spade is equally likely; hence, the area under the curve is 1, which makes sense given that the total of all probabilities in a probability distribution is 1.

Learn more about uniform here-

https://brainly.com/question/28841819

#SPJ4

To get school school a girl walks 1km north in 15 minutes she then walks 200 meter south west in 160 seconds what is the girl's average velocity for her walk to school ?

Answers

Answer:

v=1.132m/s

Explanation:

velocity=total distance/ total time

first convert 1km to m so that would be 1000m then add the total distance so 200+1000=1200. 1200 is the total distance. now add the total time so we need to convert 15 min to sec which is 900 sec. 160 +900=1060. now divide total distance by total time.

v=?

d=1200m

t=1060s

v=d/t

v=1200m/1060s

v=1.132m/s

A filament bulb, rated at 40W, converts 10% of its electrical energy supply to light energy. Calculate the quantity of light energy emitted in five minutes

Answers

The quantity of light energy emitted at 40W, in five minutes or 300 seconds will be 1200J.

Equation:

40 W total power

40 W = 40 J/s (joules per second)

10% efficiency

Efficiency x Power Equals Actual Power output

40x0.1 = 4W

Power x Time Equals Energy

300 s x 4 W = 1200 J

Energy of Light = 1200 J

Things like stars, lightbulbs, lasers, and hot objects all emit light energy. Light energy travels from stars like our Sun to the Earth. A natural source of light energy is the Sun.

The electromagnetic spectrum is much larger than the light we can see, which is made up of each hue in the rainbow. Other forms of light include those that are invisible to the human sight, such as radio waves, microwaves, infrared radiation, ultraviolet rays, X-rays, and gamma rays.

To know more about energy, visit:

https://brainly.com/question/1932868

#SPJ1

you are given a solenoid of length 0.6 m and radius 0.08 m. it has 4000 turns of wire with resistance of 0.10 ohms. you wish to generate a magnetic field of 0.15 t. the current to which your power supply should be set is closest to:

Answers

Alternating current is also known as mains power, domestic power supply, domestic power supply, mains power supply, or wall power supply, as it is the voltage supplied by the outlet.

The rate of change of direction is typically 50 to 60 times per second and is called hertz (Hz). There are three main types of power supplies.

Uncoordinated (also known as brute force), Linear Coordinated, and Switching. A fourth type of power circuit, called ripple regulation, is a hybrid of "brute force" and "switching" designs and deserves its own subsection. One way to tell if you're using an AC-DC adapter or a DC-DC model is to check the device itself. Input and output information is often displayed somewhere in the interface. If the input is AC, it is an AC-DC power supply; if both input and output are DC, it is a DC-DC model.

Learn more about power here-

https://brainly.com/question/11800127

#SPJ4

f the acceleration voltage in a television tube is 13.2 kv , what are the shortest-wavelength x rays produced by the television?

Answers

1.016 nm is  the shortest-wavelength x rays produced by the television

E = hc/λ

13200×1.6×10-19 = 6.62×10-34 ×3×108 /λ

2.11×10^-17=2.144×10^-31/λ

λ = 1.016 nm

Since the relationship between wave frequency and wavelength is inverse, gamma rays have extremely tiny wavelengths that are only a small portion of the size of atoms, whereas other wavelengths can extend as far as the universe. No of the medium they are passing through, electromagnetic radiation's wavelengths are typically expressed in terms of the vacuum wavelength, but this isn't always stated explicitly.

The wavelength of electromagnetic radiation affects how it behaves. Speed of light = wavelength x frequency Energy = Planck's constant x frequency Wave number = 1/wavelength in cm. The wavelengths of different parts of the electromagnetic spectrum are displayed together with a rough approximation of the wavelength size.

To know more about  wavelength visit : https://brainly.com/question/14530620

#SPJ4

Clocks on a spaceship moving at high speed relative to the earth run more slowly when viewed from.

Answers

According to relativity, the clocks on the spaceship move more slowly when viewed from the spaceship.

What is relativity?

Relativity is the measure of relative motion of objects.

How to decide which clock runs more slowly?

According to Einstein's theory of relativity in 1905 its postulates state that

The speed of light is constantObjects moving near the speed of light measure a shorter length called length contractionObjects moving near the speed of light measure a shorter time called time dilation

Now, since Clocks on a spaceship moving at high speed relative to the earth. Since the clock on the spaceship is moving, using the third postulate, we see that the clock on the spaceship runs more slowly when viewed from the spaceships moving frame, since it is moving relative to the earth.

So, we can see that the clocks on the spaceship move more slowly when viewed from the spaceship.

Learn more about relativity here:

https://brainly.com/question/29453152

#SPJ1

6. A book that weighs 48N and is lifted 11.6m from the floor to a tabletop. How much work is required to
accomplish this task?

Answers

When work=Force x distance
Therefore,48x11.6= 556.8 joule

A 1. 0 newton metal disk rests on an index card that is balanced on top of a glass. What is the net force acting on the disk?.

Answers

A 1.0 N metal disk rest on an index card that is balanced on the top of the glass, then the net force acting on the disk is 0 N.

What is Force?

A force in physics is an effect that has the power to alter an object's motion. A mass-containing object's velocity can alter, or accelerate, as a consequence of a force. Intuitively, a push or even a pull can also be used to describe force. Being a vector quantity, a force also has magnitude and direction. The SI unit of newton is often used to measure it (N). The letter F stands for force.

As per Newton's second law's initial conception, an entity's net force is equal to the speed at which its momentum is changing over time.

To know more about Force:

https://brainly.com/question/13191643

#SPJ1

Paint spills onto a floor in a circular pattern. The radius of the spill increases at a constant rate of 2. 5 inches per minute. How fast is the area of the spill increasing when the radius of the spill is 18 inches?.

Answers

The correct answer is 90pi in ^2/min.

Area of the spill

Area of the spill=S=πr²

dS/dr=(πr²)=2πr

Radius change with speed=dr/dt =2.5(m/s)

Area of the spill will increase with speed

dS/dt = dS/dr × dr/dt =2πr ×dr/dt

=2π×18×2.5

=282.74

Therefore the area in which the paint spilled is increasing with speed. The rate at which the area of spill is increasing is 90pi in²/min.

Learn more about area of the spill refer: :ttps://brainly.com/question/3818648

#SPJ4

What is projectile motion name the two components of projectile motion?.

Answers

A planar motion known as a projectile occurs when at least two position coordinates change at once. The following two elements can be separated out of the projectile's projection velocity.

ux = u cosαuy = u sinФ

Due to the horizontal component of the projection velocity, u cosα, and the vertical component, u sinФ, the projectile moves along the horizontal and vertical directions. So that the projectile's distances along the X and Y axes are given by x and y, respectively, let's assume that at any time t, it reaches the point P.

Motion in a horizontal direction: If air friction is ignored, the velocity's horizontal component is i. e. , u cosα will not change. Thus Initial horizontal velocity is given by the formula ux = u cosα. acceleration parallel to the ground, ax = 0.Vertical motion is described as follows:

The gravitational effect of gravity causes the projectile's vertical velocity to continuously decrease.

Initial vertical velocity is given by ux = u sinФ.

Ay = -g for acceleration along the vertical.

A projectile's motion can be broken down into two parts because it is a two-dimensional motion both vertical and horizontal motion Independent of one another, these two motions occur. The horizontal and vertical components of the projectile's velocity can be separated into two mutually perpendicular parts.Velocity changes as a result of acceleration. A direction's velocity does not change if acceleration in that direction is zero. The horizontal component of velocity in projectile motion therefore stays constant throughout the motion. A uniform motion can be described as being horizontal.Since the vertical components are continuously impacted by gravity, the vertical motion is uniformly accelerated. This is how projectile motion physics works.

To know more about projectile motion-

https://brainly.com/question/11049671

#SPJ4

A sine wave is offset 1/6 cycle with respect to time 0. What is its phase in degree and radians?.

Answers

The phase in degree and radians is 2π/6 radian.

Solution:

1/6 cycle

1/6 cycle = 1/6 × 2π = 2π/9 radian

Phase angles are measured in radians. A radian is an angle whose arc length equals its radius. One rotation is equivalent to 2π radians or 360 degrees. In electronic signals, phase is the position of the wave at a particular point in time in the waveform cycle. It measures exactly where the wave is within its cycle.

Phase is the position of the instant in the cycle of the waveform. Phase is a dimensionless quantity. A complete cycle is called a phase. Phase is also expressed in radians. Phase is a measure of the relative time difference between two sine waves. Phase is actually a time difference but is most often measured in degrees or radians.

Learn more about A sine wave here:-https://brainly.com/question/28160174

#SPJ4

suppose the outer radius ra of a cylindrical capacitor was tripled, but the charge was kept constant. by what factor would the stored energy change?

Answers

The outer radius Ra of a cylindrical capacitor was tripled, The new stored energy will increase ( [tex]\frac{ln(3Ra/Rb)}{ln(Ra/Rb)}[/tex] ) times the initial stored energy .

Capacitance of a cylindrical capacitance = 2π∈o l / ln (Ra / R b)

U = [tex]Q^{2} / 2C[/tex]

U2 / U1 = [tex]\frac{\frac{Q^{2} }{2C2} }{\frac{Q^{2} }{2C1} }[/tex] = C1 / C2

             =    [tex]\frac{\frac{2*pi*epsilon*l }{ln(Ra/Rb)} }{\frac{ 2*pi*epsilon*l}{ln(3Ra/Rb)} }[/tex]

             =    [tex]\frac{ln(3Ra/Rb)}{ln(Ra/Rb)}[/tex]

             

U2 = U1   ( [tex]\frac{ln(3Ra/Rb)}{ln(Ra/Rb)}[/tex] )

The new stored energy will increase ( [tex]\frac{ln(3Ra/Rb)}{ln(Ra/Rb)}[/tex] ) times the initial stored energy .

To learn more about capacitance here :

https://brainly.com/question/14746225

#SPJ4

a star is seen to move by 0.2 seconds of arc between february 1, 1999 and august 1, 1999 and then back to its starting point on february 1, 2000. what is the parallax angle for this star?

Answers

The parallax angle for this star is 0.1 seconds of arc.

Parallax angle How astronomers use angle measurements to calculate distances in space. The parallax angle is the angle between the Earth one season of the year and the Earth six months later, as measured from a nearby star. Astronomers use this angle to determine the distance of this star from Earth.

Parallax is based on an optical illusion. Because the human eye perceives nearby objects as larger than distant objects, distant objects appear to move slowly. The illusion has long been translated into parallax in various media to facilitate realistic effects. Parallax is a method based on measuring the two angles and sides of the triangle formed by the star and the Earth after 6 months.

Learn more about The parallax angle here:-https://brainly.com/question/1059460

#SPJ4

a certain lake, filled with fresh water, is 40 m deep and located at sea level. what is the absolute pressure (in kpa) at the bottom of the lake?

Answers

A certain lake, filled with fresh water, is 40 m deep and located at sea level. The absolute pressure (in kpa) at the bottom of the lake will be 492.1 kPa

P1 = rho * g * h

rho = density of water

g = acceleration due to gravity

h = depth

P1 = rho * g * h

   = 997 * 9.8 * 40 = 390824  N / [tex]m^{2}[/tex] = 390.8 kPa

P(absolute pressure) =  Po + P1

  =   101.3 + 390.8  = 492.1 kPa

The absolute pressure (in kPa) at the bottom of the lake will be 492.1 kPa

To learn more about absolute pressure here :

https://brainly.com/question/12937139

#SPJ4

the largest magnetic quantum number (m or ml) of an atom in the ground state is found to be 8. what must be the largest angular momentum quantum number (l)?

Answers

The angular momentum quantum number / azimuthal quantum number for the magnetic quantum number of 8 is 7/2

The magnetic quantum number of the atom = 8

The azimuth (or orbital angular momentum) quantum number describes the shape of a particular orbital. This is denoted by the symbol 'l' and its value is equal to the total number of angular nodes in the trajectory. Azimuthal quantum number values ​​can indicate either s, p, d, or f subshells with different shapes.

The angular momentum or azimuthal quantum number can be found using the formula,

                      m = 2l + 1

where m is the magnetic quantum number

           l   is the azimuthal quantum number

Let us substitute the known values in the above equation, we get

                   8 = 2l + 1

                  2l = 8 -1

                  2l = 7

                    l = 7/2

Therefore, the angular momentum quantum number is 7/2

Learn more about the quantum number in

https://brainly.com/question/16977590

#SPJ4

What is the total number of subatomic particles found in the nucleus of an atom of argon?.

Answers

The subatomic particles in the nucleus of an atom of argon depend on the nucleus and proton.

What subatomic particles?

A particle that is smaller than an atom is what is known as a subatomic particle. Protons, electrons, and neutrons are the three subatomic particles that make up an atom in most cases.

40Ar

18 protons, 22 neutrons, 18 electrons

There are 18 protons from the argon element. These 18 electrons because it is neutral, and 22 neutrons because 40 - 18 = 22.

Hence the total number of subatomic particles present in the nucleus is 22.

To learn about the subatomic particles the link is given below:

https://brainly.com/question/7495131?referrer=searchResults

#SPJ4

If the acceleration is constant and the starting velocity is zero, what is the relationship between the acceleration of a falling body (a), the time it takes to fall (t), and its instantaneous velocity when it hits the ground (v)?.

Answers

The relationship between acceleration velocity and time is v(t)=at.

What is velocity?

The speed of something in a given direction.velocity is the directional speed of to an object in motion as an indication of its rate of the  change in position as in observed from a particular to frame of reference and it's as measured by a particularly standard of time.

Sol-As per the newton's first law of motion.

Vt= vo+at

Here,

Velocity at time t is v(t).

Initial velocity is vo.

Accelaration is a and the time is t.

The initial velocity is zero.Put the 0 for vo in above equation.

v(t) = 0+at

v(t)= at

Thus, the aceelaration of a falling body (a), the time it takes to fall (t), and its instantaneous velocity when it hits the ground.

(V) is v(t) = at.

Learn more about accelaration click-

https://brainly.com/question/25749514

#SPJ4

Explain what type of conformity the subjects in muzafer sherif's moving light experiment were most likely experiencing, using evidence from the text to justify your answer.

Answers

The conformity most likely experienced by subjects in Muzaffar Sheriff's Moving Light experiment was internalization.

Internalization is defined as a group of people sharing similar thoughts and behaviors purely with little or no influence from one part on the other, without falsifying their behavior just to collect The type of affinities to adopt. This type of affinity is seen in those who participated in Muzaffar Sherif's Moving Light Trial.

Conformity means that people make their beliefs attitudes behaviors or perceptions more conformable to those of the group to which they belong aspire to belong or to which they desire approval. It is the process of changing to Conformity has important social implications and continues to be actively investigated.

Learn more about Muzaffar Sheriff's here:-https://brainly.com/question/22075408

#SPJ4

you are analyzing a video of a moving object and want to calculate its average velocity. the video has a frame rate of 15 fps. as you are analyzing the video frame by frame, you see that the object moves a distance of 39 cm in 9 frames. what is the average velocity of the object in m/s?

Answers

Let Distance moved by objects x = 45cm.

Velocity can be easily calculated by multiplying the centroid distance between the previous frame and the current frame by the frame rate of the video and scaling the units to meters pixels. Average velocity is defined as the change in position or displacement divided by the time interval over which the displacement occurs.

Average velocity can be positive or negative depending on the sign of the shift. From a particle's velocity versus time graph, its average velocity can be found by calculating the total area under the graph and dividing it by the appropriate time interval. For particles with uniform acceleration, the velocity-time graph is a straight line. Calculate acceleration by dividing the change in velocity by the change in time.

Learn more about Average velocity here:-https://brainly.com/question/24739297

#SPJ4

Where is the sun located on Earth’s elliptical orbit?(1 point)
at a focus?
at the perihelium
at the aphelium
at the center of the two foci

Answers

Answer:

(C)

Explanation:

i took the test and please make me the brainlest

Other Questions
Which angles are coterminal with 32 what is the range of f(X)=3x The network of trade routes through the Muslim world contributed to their Golden Age through_______ using references websites or maps and a different color line, draw the major crystal plates of the earth on your world map. label the names of the plates neatly jonathan is distracted from the professor's lecture because the student sitting next to him keeps coughing. the factor that has negatively impacted the communication process is called Humans build cities that replace grassy areas with concrete. What processes would that impact in the water cycle and why?. What is the answer to this question? Find the value of X in the diagram. Read the selection from the section "Refraction." Another behavior is called refraction. Sometimes, a wave moves from one medium to another, like from water to air. It changes direction. This is refraction. Fill in the blank. A "medium" is ____. 18 The diagram shows a rectangular garden path. 600 cm Wasim is going to cover the path with paving stones. Each paving stone is a square of side 30 cm. Each paving stone costs 2.50 Wasim has 220 to spend on paving stones. Show that he has enough money to buy all the paving stones he needs. 120 cm 0.5199222222222222.Is it rational because? read the abstract for the article on coral trees in italy (number 2 listed in the above examples). what is the purpose of their work? 1edHI6mZI =9JWrite your answer as an integer or as a decimal rounded to thenearest tenth.01HRSEOL The green light emitted by a stoplight has a wavelength of 525 nm. What is the frequency of this photon? (c = 3.00 10 m/s). families are different from other relationship types because they a. have a shared identity. b. have multiple roles. c. have greater emotional complexity. d. all of the options are correct. 10 things about genetically different amongst humans that is most likely due to crossing over? In medieval europe, a ___ was an association of artisans or workers skilled in a certain craft. Which of the following is not a value of transcendentalism the (the rate banks charge their best customers) closely follows the rate that the fed adjusts by using open market operations. he pattern of improvement identified from a worker having performed a task multiple times is known as a initially, there is no output gap and inflation expectations are 2%. then, contractionary fiscal policy results in gdp falling 3% below potential gdp. what is the inflation rate after that fiscal contraction?