The cutoff frequency for a certain element is 1.22 x 10^15 Hz. What is its work function in eV?

Answer:

0.6192

Explanation:

1.44 x 0.430=0.6192

Answer:

decreases

Explanation:

because all the particles are wanting to say together and hit each other in a small area

The magnitude of the cannonball's velocity after 1.23 s will be 59.46 m/sec.

The change of distance with respect to time is defined as speed. Speed is a scalar quantity. It is a time-based component. Its unit is m/sec.

The given data in the problem is

u is the initial velocity of canonball= 47.4 m/sec

g is the acceleration of free fall = 9.81 m/sec²

v is the velocity after 1.23 s

According to Newton's first equation of motion,

[tex]\rm v=u +gt \\\\ v= 47.4 \ m/sec + 9.81 \ m/sec^2 \times 1.23 sec \\\\\ v=59.46 \ m/sec[/tex]

Hence, the magnitude of the cannonball's velocity after 1.23 s will be 59.46 m/sec.

To learn more about the velocity, refer to the link: https://brainly.com/question/862972.

#SPJ1

Answer:(note that values will be on top in small)

cobalt :- 60Co

potassium :- 40K

neon :- 24Ne

lead :- 208Pb

The forces a piano tuner applies to stretch the steel piano wire willl be 1.4 × 10¹¹ N.

Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.

The application of a force may be used to describe the steel as an elastic element within a certain range of applied force.

Given data;

Young modulus, E=2.10 × 10¹¹ N/m²

Cross-sectional area,A

Final length,[tex]\rm L_f = 1.45 m = 1450 \ mm[/tex]

Initial length,[tex]\rm L_i = 7.5 mm[/tex]

[tex]\rm F = \frac{(L_f-L_i)(E)(A)}{L_1} \\\\ \rm F = \frac{(1450 - 7.5)(2.0 \times 0^{11})(0.746)}{1450} \\\\ F = 1.4 \times 10^{11} \ N[/tex]

Hence, the force a piano tuner applies to stretch the steel piano wire willl be 1.4 × 10¹¹ N.

To learn more about the force refer to the link;

https://brainly.com/question/26115859

#SPJ1

(a) The required magnitude of the electric field when the point charge is an electron is 5.57 x 10⁻¹¹ N/C.

(b) The required magnitude of the electric field when the point charge is an proton is 1.02 x 10⁻⁷ N/C.

The magnitude of electric field is given by the following equation.

F = qE

But F = mg

mg = qE

E = mg/q

where;

E = (9.11 x 10⁻³¹ x 9.8)/(1.602 x 10⁻¹⁹)

E = 5.57 x 10⁻¹¹ N/C

E = (1.67 x 10⁻²⁷ x 9.8)/(1.602 x 10⁻¹⁹)

E = 1.02 x 10⁻⁷ N/C

Thus, the required vertical electric field is greater when the charge is proton.

Learn more about electric field here: https://brainly.com/question/14372859

#SPJ1

We need Net resistance

solve from right words

[tex]\\ \rm\Rrightarrow R_1=20+10=30\Omega[/tex]

[tex]\\ \rm\Rrightarrow \dfrac{1}{R_2}=\dfrac{1}{30}+\dfrac{1}{50}=\dfrac{5+3}{150}[/tex]

[tex]\\ \rm\Rrightarrow R_2=\dfrac{150}{8}=18.75\Omega[/tex]

[tex]\\ \rm\Rrightarrow \dfrac{1}{R_3}=\dfrac{1}{30}+\dfrac{1}{40}=\dfrac{4+3}{120}[/tex]

[tex]\\ \rm\Rrightarrow R_3=\dfrac{120}{7}=17.14\Omega[/tex]

[tex]\\ \rm\Rrightarrow R_{net}=17.14+18.75=35.89\Omega[/tex]

Use ohm's law

[tex]\\ \rm\Rrightarrow I=\dfrac{V}{R}[/tex]

[tex]\\ \rm\Rrightarrow I=\dfrac{9}{35.89}[/tex]

[tex]\\ \rm\Rrightarrow I\approx 0.25A[/tex]

The minimum stopping distance when the car is moving at 32.0 m/s is 348.3 m.

The acceleration of the car before stopping at the given distance is calculated as follows;

v² = u² + 2as

when the car stops, v = 0

0 = u² + 2as

0 = 15² + 2(76.5)a

0 = 225 + 153a

-a = 225/153

a = - 1.47 m/s²

If the same force is applied, then acceleration is constant.

v² = u² + 2as

0 = 32² + 2(-1.47)s

2.94s = 1024

s = 348.3 m

Learn more about distance here: https://brainly.com/question/4931057

#SPJ1

Answer:

V = ?

C = 3 × 10^8

wavelength = 2.10 × 10^-7

wavelength = C/V

V = C/wavelength

V = 3 × 10^8/2.10 × 10^-7

V = 1.43 × 10^ 15

Taking into account the definition of calorimetry,  the mass of the coffee is 253.33 g.

Calorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.

Sensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).

So, the equation that allows to calculate heat exchanges is:

Q = c× m× ΔT

where:

In this case, you know:

Replacing in the equation that allows to calculate heat exchanges is:

190 cal = 1 [tex]\frac{cal}{gC}[/tex]× m× 0.75 C

Solving:

m= 190 cal÷ (1 [tex]\frac{cal}{gC}[/tex]× 0.75 C)

m=253.33 g

Finally, the mass of the coffee is 253.33 g.

Learn more about calorimetry:

brainly.com/question/14057615

brainly.com/question/24988785

brainly.com/question/21315372

brainly.com/question/13959344

#SPJ1

The two factors that affect current carrying capacity of an accumulator will be accumulator size and ambient temperature

Utilizing the compressible and decompressible properties of nitrogen gas, an accumulation vessel is used to store hydraulic pressure.

These key deciding elements are:

1. Accumulator Size: The current capacity increases as the circumference of the conductor increases.

2. Ambient Temperature: The greater the ambient temperature, the less heat is needed to raise the insulation's maximum operating temperature.

3. Accumulator identification:

4. Conditions for Installation:

Hence, the two factors that affect current carrying capacity of an accumulator will be accumulator size and ambient temperature

To learn more about the accumulator refer;

https://brainly.com/question/15907765

#SPJ1

The weight of an object on pluto will be 15.56. Mass multiplied by the gravitational acceleration gives weight.

Gravitation is a natural law by which all things with all matter are attracted towards one another. Gravity is responsible for large-scale structures present in the Universe.

By dividing the object's weight on Earth by 9.8 m/s², as illustrated below, one may calculate the object's mass.

m = 250 N / 9.8 m/s²

m = 25.51 kg

Multiply the acquired mass by Pluto's gravitational acceleration (g);

W = (25.51 kg) x (0.61 m/s²)  

W = 15.56 N

Thus, the item will only be 15.56 N in weight.

To learn more about gravitation refer to the link;

https://brainly.com/question/3009841

#SPJ1

Answer: B.

15.6 newtons

Explanation: edmentum

A cryptologist is not a type of scientist. The correct answer is a cryptologist and the correct option is (D).

Experts in the study of methods for secure communication and data security through encryption and decryption are known as cryptologists.

Even though they are considered scientists in the broadest sense, they are not typically classed with the other natural scientists (geologists, meteorologists, and botanists) stated in the alternatives.

Due to its emphasis on the methods and mathematical principles used in encryption and decryption, cryptology is more intimately related to computer science and mathematics.

Therefore, The correct answer is a cryptologist and the correct option is (D).

To know more about the cryptologist:

https://brainly.com/question/24165734

#SPJ3

d. is wrong...the temperature cannot be measured due to physical changes

Answer:

Something which occupies space and have mass.

Answer:

D. trying to eat healthier foods

Explanation:

The minimum coefficient of friction between the track and the mouse's feet that would allow a turn at this speed without sleeping is 1.97.

The minimum coefficient of friction is calculated as follows;

F = μmg = mac

μmg = mac

where;

μg = ac

μg = v²/r

μ = v²/rg

where;

μ = (1.39²)/(0.1 x 9.8)

μ = 1.97

Thus, the minimum coefficient of friction between the track and the mouse's feet that would allow a turn at this speed without sleeping is 1.97.

Learn more about minimum coefficient of friction here: https://brainly.com/question/23971360

#SPJ1

The stress on the wire is determined as  6.37 x 10⁶ N/m².

The stress on the wire is calculated as follows;

σ = F/A

where;

Let the diameter of the wire = 2 mm

Area = πr²

Area = π(1 x 10⁻³)²

Area = 3.142 x 10⁻⁶ m²

Stress = 20/(3.142 x 10⁻⁶)

Stress = 6.37 x 10⁶ N/m²

Learn more about stress here: https://brainly.com/question/11819849

#SPJ1

(a) The equation for the work done in stretching the spring from x1 to x2 is ¹/₂K₂Δx².

(b) The work done, in stretching the spring from x1 to x2 is 11.25 J.

(c) The work, necessary to stretch the spring from x = 0 to x3 is 64.28 J.

The work done in stretching the spring is calculated as follows;

W = ¹/₂kx²

W(1 to 2) = ¹/₂K₂Δx²

where;

W(1 to 2)  =  ¹/₂(250)(0.65 - 0.35)²

W(1 to 2)  = 11.25 J

W(0  to 3) = ¹/₂k₁x₁² + ¹/₂k₂x₂² + ¹/₂F₃x₃

where;

W(0  to 3) = ¹/₂(660)(0.35)² + ¹/₂(250)(0.65 - 0.35)² + ¹/₂(105)(0.89 - 0.65)

W(0  to 3) = 64.28 J

Learn more about work done here: https://brainly.com/question/25573309

#SPJ1

Answer:

See the answer Explain why aircraft are carefully designed so that parts do not resonate. Expert Answer This virtually takes place, however maximum usually in small piston-engined airplanes, in particular dual-engined airplanes. The resonant frequency of the fuselage of a small plane goes to have numerous nodes, withinside the low loads of hertz.

The work done by the electric field on the proton when it reaches the positive plate willl be 9.1 ×10⁻¹⁵ J.

A physical field that surrounds electrically charged particles and exerts a force on all other charged particles in the field, either attracting or repelling them, is referred to as an electric field,

The electric field formula is as follows:

E = F /Q

Where,

The electric field is denoted by the letter E.

F is a powerful letter.

The charge is Q.

The potential difference between the plate;

[tex]\rm V = E d \\\\ V = 3.40 \times 10^6 \times 0.13 \ m \\\\ V= 442000 \\\\ V = 4.42 \times 10^5 \ v[/tex]

Force on the charged particle ;

[tex]\rm F = qV \\\\ F= 1.6 \times 10^{-19} \times 4.42 \times 10^ 5 \\\\\ F = 7.0 \times 10^{-14} \ N[/tex]

Work done in  order to move the charge;

[tex]\rm W = F \times d \\\\ W= 7.0 \times 10^{-14} \ N \times 0.13 m \\\\ W=9.1 \times 10^{-15} \ J[/tex]

Hence, the work done by the electric field on the proton when it reaches the positive plate willl be 9.1 ×10⁻¹⁵ J.

The complete question is attached in attachments.

To learn more about the electric field refer to the link;

https://brainly.com/question/26690770

#SPJ1

The total mass of the galaxy is 443.4 Solar mass

Orbital velocity ([tex]v[/tex]) = [tex]\sqrt{\frac{MG}{R} }[/tex]

where M= weight of galaxy

G= gravitational constatnt = [tex]6.674*10^-^1^1[/tex] (given)

R = distance from centre = [tex]41200[/tex] Light years (given)= [tex]4.12*9.5*10^1^6[/tex]  km (1 ly= [tex]9.5*10^3[/tex] billion km)

v= orbital velocity = [tex]275[/tex]  [tex]km/s[/tex] (given)

∴ According to the formula

[tex](2.75*10^2)^2[/tex] = [tex]\frac{M*6.674*10^-^1^1}{4.12*9.5*10^1^6}[/tex]

⇒ [tex]7.56*10^4*4.12*9.5*10^1^6=M*6.674*10^-^1^1[/tex] (cross multiplying and expanding)

⇒ [tex]29.59*10^2^1=M*6.674*10^-^1^1[/tex]

⇒ [tex]\frac{29.59*10^2^1*10^1^1}{6.674}=M[/tex]

⇒ [tex]4.434*10^3^2=M[/tex]

1 solar mass = [tex]1.989*10^3^0 kg[/tex]

⇒ Mass in solar mass =443.4 Solar mass

⇒ M = 443.4 Solar mass

Learn more about Orbital velocity here :

https://brainly.com/question/22247460

#SPJ10

The variable on the y-axis should be the running speed of hamsters since it is the dependent variable.

The dependent variable is the variable whose value fluctuates depending on other variables in an experiment.

In this case, the running speed is the dependent variable because it depends on the weight of the hamster.

The dependent variable is generally graphed on the Y axes, whereas the independent variable is graphed on the X-axes.

In conclusion, the variable on the y-axis should be the running speed of hamsters since it is the dependent variable.

Learn more about the dependent variable here:

https://brainly.com/question/25223322

#SPJ1

Answer:

Explanation:

Half-life problems are modeled as exponential equations.  The half-life formula is [tex]P=P_o\left (\dfrac{1}{2} \right)^{\frac{t}{k}}[/tex] where [tex]P_o[/tex] is the initial amount, [tex]k[/tex] is the length of the half-life, [tex]t[/tex] is the amount of time that has elapsed since the initial measurement was taken, and [tex]P[/tex] is the amount that remains at time [tex]t[/tex].

[tex]P=14.2\left (\dfrac{1}{2} \right)^{\frac{t}{8.0252}}[/tex]

Deriving the half-life formula

If one forgets the half-life formula, one can derive an equivalent equation by recalling the basic an exponential equation, [tex]y=a b^{t}[/tex], where [tex]t[/tex] is still the amount of time, and [tex]y[/tex] is the amount remaining at time [tex]t[/tex].  The constants a and b can be solved for as follows:

Knowing that amount initially is 14.2g, we let this be time zero:

[tex]y=a b^{t}[/tex]

[tex](14.2)=ab^{(0)}[/tex]

[tex]14.2=a *1[/tex]

[tex]14.2=a[/tex]

So, [tex]a=14.2[/tex], which represents out initial amount of the substance, and our equation becomes: [tex]y=14.2 b^{t}[/tex]

Knowing that the "half-life" is 8.0252 days (note that the unit here is "days", so times for all future uses of this equation must be in "days"), we know that the amount remaining after that time will be one-half of what we started with:

[tex]\left(\frac{1}{2} *14.2 \right)=14.2 b^{(8.0252)}[/tex]

[tex]\dfrac{7.1}{14.2}=\dfrac{14.2 b^{8.0252}}{14.2}[/tex]

[tex]0.5=b^{8.0252}[/tex]

[tex]\sqrt[8.0252]{\frac{1}{2}}=\sqrt[8.0252]{b^{8.0252}}[/tex]

[tex]\sqrt[8.0252]{\frac{1}{2}}=b[/tex]

Recalling exponent properties, one could find that  [tex]\left ( \frac{1}{2} \right )^{\frac{1}{8.0252}}=b[/tex], which will give the equation identical to the half-life formula.  However, recalling this trivia about exponent properties is not necessary to solve this problem.  One can just evaluate the radical in a calculator:

[tex]b=0.9172535661...[/tex]

Using this decimal approximation has advantages (don't have to remember the half-life formula & don't have to remember as many exponent properties), but one minor disadvantage (need to keep more decimal places to reduce rounding error).

So, our general equation derived from the basic exponential function is:

[tex]y=14.2* (0.9172535661)^t[/tex]  or [tex]y=14.2*(0.5)^{\frac{t}{8.0252}}[/tex] where y represents the amount remaining at time t.

Solving for the amount remaining

With the equation set up, substitute the amount of time it takes to cross the Pacific to solve for the amount remaining:

[tex]y=14.2* (0.9172535661)^{(31.8)}[/tex]          [tex]y=14.2*(0.5)^{\frac{(31.8)}{8.0252}}[/tex]

[tex]y=14.2* 0.0641450581[/tex]                    [tex]y=14.2*(0.5)^{3.962518068}[/tex]

[tex]y=0.9108598257[/tex]                              [tex]y=14.2* 0.0641450581[/tex]

                                                        [tex]y=0.9108598257[/tex]

Since both the initial amount of Iodine, and the amount of time were given to 3 significant figures, the amount remaining after 31.8days is 0.911g.

(a) The equilibrant C for force of vector A and B is 3.43 N.

(b) The equilibrant C for fx of vector A and B is 2.1 N.

(c) The equilibrant  C, for fy of vector A and B is 2.12 N.

An equilibrant force is a single force that will bring other bodies into equilibrium.

Vector A: mass = 0.2 kg, θ = 20⁰

Vector B: mass = 0.15 kg, θ = 80⁰

Fx = mg cosθ

Fy = mg sinθ

where;

Force of A due to its weight

F(A) = mg

F(A) = 0.2 x 9.8 = 1.96 N

Fx = (0.2 x 9.8) cos(20) = 1.84 N

Fy = (0.2 x 9.8) sin(20) = 0.67 N

R = √(0.67² + 1.84²)

R = 1.96 N

Force of B due to its weight

F(B) = mg

F(B) = 0.15 x 9.8

F(B) = 1.47 N

Fx = (0.15 x 9.8) cos(80) = 0.26 N

Fy = (0.15 x 9.8) sin(80) = 1.45 N

R = √(0.26² + 1.45²)

R= 1.47 N

Equilibrant force:

Force, C = 1.96 N + 1.47 N

Force, C = 3.43 N

Equilibrant FX:

Fx, C = Fx(A) + Fx(B)

Fx, C = 1.84 N + 0.26 N = 2.1 N

Equilibrant FY:

Fy, C = Fy(A) + Fy(B)

Fy, C =0.67 N + 1.45 N = 2.12 N

Learn more about equilibrant force here: https://brainly.com/question/8045102

#SPJ1

Jupiter is the largest. the closest Jovian planet to the sun is Jupiter and most farthest is  Neptune. moons of Jupiter are Europa, lo, Ganymede, etc. Saturn has an orbital period equal to 29 earth years. Uranus's rotational period is equal to 17h 14m.

In terms of size-

In terms of location-

Jovian planets are generally farther from the sun while terrestrial plants are closer to the sun. therefore Jupiter, Saturn, Uranus, and Neptune are away from the sun whole earth is closer to the sun.

In terms of moons-

Jovian planets have more moons as compared to earth. Jupiter has 53 moon, Uranus has 27 Miranda, ariel ,Oberon) while the earth has one moon.

In terms of the orbital period-

Jovian planets have a longer orbital period than earth as they are further from the sun.

In terms of the rotational period-

The rotational period of the Jovian planet is approximately 10 to 17 hours.

learn more about the Jovian planet here:

https://brainly.com/question/14450796

#SPJ10

The magnitude of the vector is 34.092 N

The resultant is the square root of sum of square of the vector component of x and y direction.

R =√ [(Nx)² +(Ny)²]

Given is the vector with horizontal length of the vector = -28.7 m and the vertical length of the vector = 18.4 m

The resultant will be

R =√ [(-28.7)² +(18.4)²]

R = 34.092 N

Thus, the magnitude of the vector is  34.092 N.

Learn more about resultant.

https://brainly.com/question/12784665

#SPJ1

Answer:

4.2m/s

Explanation:

0.50x8.4=4.2m/s

Answer:

71m/s

Explanation:

when you convert it you get 158.822 miles per hour