The value of K for the formation of PbCrO4 from Pb2+ and CrO42- is 5.0×10⁷.
The dissociation reaction of PbCrO4 can be represented as:
PbCrO4 ⇌ Pb2+ + CrO42-
The equilibrium constant (K) for this dissociation reaction is given as 2.0×10⁻¹⁶.
To find the equilibrium constant for the formation of PbCrO4, we need to consider the reverse reaction. The formation reaction can be represented as:
Pb2+ + CrO42- ⇌ PbCrO4
The equilibrium constant for the formation reaction (K') is the reciprocal of the dissociation equilibrium constant (K). Therefore:
K' = 1/K = 1/(2.0×10⁻¹⁶) = 5.0×10⁷
learn more about equilibrium constant here:
https://brainly.com/question/32209502
#SPJ11
Give a reasonable Lewis structure, including formal charges, for HNC (N.B. N is the central atom). H,N, and C are in groups 1,5 , and 4 and their atomic numbers are 1,7 , and 6.
The Lewis structure for HNC, with formal charges, is as follows: H : C ≡ N :
In the Lewis structure of HNC, we first determine the total number of valence electrons. Hydrogen (H) has 1 valence electron, nitrogen (N) has 5 valence electrons, and carbon (C) has 4 valence electrons. Thus, the total number of valence electrons is 1 + 5 + 4 = 10.
Next, we arrange the atoms, with the central atom being nitrogen (N). Since carbon (C) is more electronegative than hydrogen (H), we place carbon as a terminal atom and connect it to nitrogen with a triple bond.
We distribute the remaining electrons around the atoms, starting with the terminal atoms. Hydrogen (H) needs 2 electrons to complete its valence shell, so we place one electron pair (two electrons) around each hydrogen atom.
After placing the electrons, we check the formal charges. The formal charge of an atom can be calculated by subtracting the assigned electrons (lone pairs plus half of the bonding electrons) from the total valence electrons of that atom. In this case, the formal charges on the atoms are: H = 0, N = 0, and C = 0.
Thus, the resulting Lewis structure for HNC, with formal charges, is as shown above.
learn more about Lewis structure here:
https://brainly.com/question/32194427
#SPJ11
A balloon is filled to a volume of 22.611 at a temperature of 27.1°C. If the pressure in the balloon is measured to be 2.200 atm, how many moles of gas are contained inside the balloon? mol
The number of moles of gas contained inside the balloon is 0.983 mol.
To find the number of moles of gas, we can use the ideal gas law equation, PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
Volume, V = 22.611 L
Temperature, T = 27.1°C = 27.1 + 273.15 K
Pressure, P = 2.200 atm
We need to convert the temperature to Kelvin since the ideal gas law requires temperature in Kelvin.
Using the ideal gas law equation, we can rearrange it to solve for the number of moles:
n = PV / RT
Substituting the given values and the ideal gas constant R = 0.0821 L·atm/(mol·K), we have:
n = (2.200 atm) * (22.611 L) / (0.0821 L·atm/(mol·K) * (27.1 + 273.15 K)
Calculating the expression, we find:
n ≈ 0.983 mol
learn more about moles here:
https://brainly.com/question/28239680
#SPJ11
Which of the following processes is/are endothermic? a. Particle movement slowing down b. An ice cube freezing c. A chemical reaction that absorbs heat d. A space heater giving off heat
The process that is endothermic from the given options is the process in option c (A chemical reaction that absorbs heat).
An endothermic process is one that absorbs heat from its surroundings, resulting in an increase in the internal energy of the system. In a chemical reaction that absorbs heat, the reactants take in energy from the surroundings, leading to a decrease in temperature.
The other processes mentioned are not endothermic:
a. Particle movement slowing down: This process refers to a decrease in the kinetic energy of particles, which is associated with a decrease in temperature. It is not an endothermic process, as it does not involve the absorption of heat.
b. An ice cube freezing: Freezing is an exothermic process, meaning it releases heat to the surroundings. As the water molecules in the ice rearrange and form a solid structure, they release energy in the form of heat.
d. A space heater giving off the heat: This is also an exothermic process. The space heater converts electrical energy into heat energy, which is released into the surrounding environment to warm it up.
Hence, the correct answer is option c. A chemical reaction that absorbs heat.
Learn more about the endothermic process here:
https://brainly.com/question/29555731
#SPJ 4
The standard reduction potential E0D2|D+,red for the reaction:
2D+(aq) + 2e- -> D2 (g)
where D is deuterium, is -0.0034V at 25°C.
Consider the following Cell:
Pt(s) | D2(g) | D+(aq) || H+(aq) | H2(g) | Pt(s)
for which we have the following Cell reaction:
2H+(aq) + D2(g) -> 2D+(aq) + H2(g)
a) Determine E0cell
b) Sketch a schematic of the physical design of the Cell. Label the appropriate electrodes "+" and "-".
The standard cell potential (E₀cell) for the given cell is -0.0017V, and the physical design consists of a Pt|D₂|D⁺ anode and a H⁺|H₂|Pt cathode.
a) To determine E₀cell, we can use the formula:
E₀cell = E₀cathode - E₀anode
Given that the reduction potential E₀D₂|D⁺,red is -0.0034V, we can identify it as the cathode reaction. The anode reaction is the reverse of the cell reaction:
H⁺(aq) + H₂(g) -> 2H⁺(aq) + D₂(g)
Since the cell reaction involves the sum of the cathode and anode reactions, the reduction potential of the anode reaction must be the negative of E₀cell:
E₀anode = -E₀cell
Thus, E₀cell = E₀cathode - E₀anode = E₀D₂|D⁺,red - (-E₀cell) = E₀D₂|D⁺,red + E₀cell
Substituting the given value of E₀D₂|D⁺,red as -0.0034V:
E₀cell = -0.0034V + E₀cell
Rearranging the equation, we find:
E₀cell - E₀cell = -0.0034V
2E₀cell = -0.0034V
E₀cell = -0.0017V
Therefore, the standard cell potential E₀cell is -0.0017V.
b) The schematic of the physical design of the cell can be represented as follows:
Pt(s) | D₂(g) | D⁺(aq) || H⁺(aq) | H₂(g) | Pt(s)
The "+" and "-" symbols indicate the direction of electron flow. In case, the electrons flow from left to right. Therefo, the left electrode (Pt(s) | D₂(g) | D⁺(aq)) is the anode, and the right electrode (H⁺(aq) | H₂(g) | Pt(s)) is the cathode.
To know more about cell potential refer here
brainly.com/question/15570309#
#SPJ11
Which variables would not effect the following equilibrium? CH4(g) + 2O2(g) CO2(g) + 2H2O(g)
Group of answer choices
Increase in partial pressure of CO2(g).
Increase in partial pressure of O2(g).
Increase in partial pressure of CH4(g).
Increase in total pressure.
Decrease in partial pressure of H2O(g).
Only the change in the concentration of the reactants will affect the equilibrium of the given reaction. Changes in pressure and temperature will not affect the equilibrium as long as the volume remains constant. Hence, options 1, 4, and 5 are correct choices.
The variables that would not affect the equilibrium of the given reaction are:
1. Increase in partial pressure of CO₂(g). - This will not affect the equilibrium because CO₂ is one of the products of the reaction and does not appear in the balanced equation as a reactant.
4. Increase in total pressure. - The equilibrium position is not influenced by changes in total pressure as long as the volume remains constant. This is based on Le Chatelier's principle, which states that changes in pressure only affect the equilibrium if the volume of the system changes.
5. Decrease in partial pressure of H₂O(g). - Decreasing the partial pressure of H₂O(g) will not affect the equilibrium because water (H₂O) is one of the products of the reaction and does not appear in the balanced equation as a reactant.
Therefore, options 1, 4, and 5 would not affect the equilibrium of the given reaction.
To know more about the Le Chatelier's principle refer here,
https://brainly.com/question/11307868#
#SPJ11
9 4.55g of zinc is reacted with 50c * m ^ 3 of 2.25mol / d * m ^ 3 dilute hydrochloric acid.
The equation for the reaction is shown.
Zn + 2HCl -> ZnC*l_{2} + H_{2}
Which volume of hydrogen gas, at room temperature and pressure, is produced in the reaction?
A 1.35d * m ^ 3
B 1.67d * m ^ 3
C 2.7d * m ^ 3
D 3.34d * m ^ 3
The volume of hydrogen gas produced in the reaction is approximately 0.67 m³. None of the given option is correct.
To determine the volume of hydrogen gas produced in the reaction, we need to calculate the number of moles of hydrogen gas first. Then, we can use the ideal gas law to convert the number of moles to volume at room temperature and pressure.
From the balanced chemical equation:
Zn + 2HCl -> ZnCl₂ + H₂
We can see that 1 mole of zinc reacts with 2 moles of hydrochloric acid to produce 1 mole of hydrogen gas.
Given:
Mass of zinc (Zn) = 4.55 g
Molar mass of zinc (Zn) = 65.38 g/mol
Concentration of hydrochloric acid (HCl) = 2.25 mol/dm³
Volume of hydrochloric acid (HCl) = 50 cm³ = 50 × 10⁻³ dm³
First, we calculate the number of moles of zinc:
Number of moles of zinc (Zn) = Mass / Molar mass = 4.55 g / 65.38 g/mol
Since the ratio between zinc and hydrogen gas is 1:1, the number of moles of hydrogen gas produced is also equal to the number of moles of zinc.
Now, we can convert the number of moles of hydrogen gas to volume using the ideal gas law:
PV = nRT
Assuming room temperature (around 298 K) and pressure (around 1 atm), we can rearrange the equation to solve for volume (V):
V = nRT / P
Plugging in the values:
V = (Number of moles of hydrogen gas) × (Ideal gas constant) × (Temperature) / (Pressure)
Calculating the volume of hydrogen gas:
V = (4.55 g / 65.38 g/mol) × (0.0821 dm³·atm/mol·K) × (298 K) / (1 atm)
V ≈ 0.67 dm³
Converting to the desired units:
V ≈ 0.67 × 10³ cm³ = 0.67 × 10³ × 10⁻³ m³ = 0.67 m³
None of the given answer options match the calculated volume, so it seems there might be an error in the provided options.
For more such questions on hydrogen gas
https://brainly.com/question/19813237
#SPJ8
a student performs a reaction that makes aluminum oxide. according to her calculations, she should expect to make 85.3 grams. she actually produces 61 grams. what is her percent yield?
72%
Explanation:Percent yield is the amount a reaction yields compared to what the reaction is expected to yield.
Defining Percent Yield
In every reaction, we can calculate how much the reaction should produce using stoichiometry. The closer the yield is to 100%, the more successful the reaction was. If the percent yield is too low, then we know that there was an error in the lab or that one of the samples used in the experiment was impure. Additionally, the percent yield cannot be over 100% due to the law of conservation of mass. If the calculated percent yield was over 100%, then we know that there was an error in the experiment as well.
Calculating Percent Yield
Percent yield is calculated using a formula. The percent yield formula is as follows:
[tex]\displaystyle \frac{\rm actual \ yield}{\rm expected\ yield} *100\%[/tex]In this reaction, the expected yield is 85.3g and the actual yield is 61g. So, we can plug these values into the formula.
[tex]\displaystyle \frac{61}{85.3} *100\%[/tex] = 72%Remember to round to significant figures (sig figs) for percent yield. Since the actual yield has 2 sig figs, so should the percent yield. The percent yield for the reaction is 72%. This shows that there was likely some form of error in the experiment because the percent yield is notably lower than 100%.
Consider the following unbalanced particulate representation of a chemical equation: 0+0→ C= black O=a red
Write a balanced chemical equation for this reaction, using the smallest integer coefficient No mere group attempte remain
We have two carbon atoms on both sides, two oxygen atoms on the reactant side (O2), and two oxygen atoms on the product side (2CO). By using the smallest integer coefficients, we have successfully balanced the equation.
To balance the chemical equation, we need to ensure that the number of each type of atom is the same on both sides of the equation. From the given unbalanced particulate representation, we can deduce that we have carbon (C) and oxygen (O) involved in the reaction.
The balanced chemical equation for this reaction is:
2C + O2 → 2CO
In this equation, we have two carbon atoms on both sides, two oxygen atoms on the reactant side (O2), and two oxygen atoms on the product side (2CO). By using the smallest integer coefficients, we have successfully balanced the equation.
To know more about integer visit-
https://brainly.com/question/33503847
#SPJ11
Which of the following is a strong acid in the group? Select one: a. HClO(aq) b. HClO2(aq) c. HClO3(aq) d. HF(aq) e. all are strong acids
Among the given options, the strong acid is HClO3₃ (aq), option C.
What are acids?An acid is a substance that donates a hydrogen ion (H+) to another substance when dissolved in a solution. When dissolved in a solvent, acids produce hydrogen ions (H+), also known as protons, that bond with solvent molecules to create hydronium ions (H3O+).This is known as the Arrhenius definition of an acid.
What are strong acids?Strong acids are chemicals that completely ionize in a water solution, meaning that all of the acid molecules dissociate to form hydrogen ions, or protons. Strong acids have a low pH and a higher concentration of H+ ions in a solution.
What is the pH scale?The pH scale is a logarithmic scale that ranges from 0 to 14 and measures the concentration of H+ ions in a solution. The lower the pH, the more acidic the solution is. The pH of a neutral solution is 7, while the pH of an acidic solution is less than 7 and the pH of a basic solution is more than 7.
Among the given options, the strong acid is HClO3 (aq).HClO(aq) is a weak acid.HClO2(aq) is a weak acid.HF(aq) is a weak acid.All of the acids listed are weak except for HClO3 (aq).HClO3(aq) is the only strong acid in the given options.
So, option C is the correct answer.
To know more about strong acid click on below link :
https://brainly.com/question/29769012#
#SPJ11
an ideal gas is allowed to expand from 2.60 l to 24.7 l at constant temperature. by what factor does the volume increase?
The volume increases by a factor of 9.5. This means that the final volume is 9.5 times larger than the initial volume.
To calculate the factor by which the volume increases, we need to compare the initial volume (V1) to the final volume (V2) of the gas by ideal gas law.
Given:
Initial volume (V1) = 2.60 L
Final volume (V2) = 24.7 L
The factor by which the volume increases can be determined by dividing the final volume by the initial volume:
Volume increase factor = V2 / V1
Plugging in the given values:
Volume increase factor = 24.7 L / 2.60 L
Calculating the volume increase factor:
Volume increase factor = 9.5
Therefore, the volume increases by a factor of 9.5. This means that the final volume is 9.5 times larger than the initial volume.
To know more about ideal gas law:
https://brainly.com/question/32388025
#SPJ4
during the oxidation of isocitrate, is decarboxylated to form a-ketoglutarate. a) hydroxyethyl-tpp b) carboxybiotin c) oxalosuccinate d) succinyl-phosphate e) none of the above
The correct answer is e) none of the above.
Isocitrate is transformed into alpha-ketoglutarate by the enzyme isocitrate dehydrogenase during the oxidation of isocitrate in the tricarboxylic acid (TCA) cycle. Decarboxylation is the process by which a CO₂ molecule is removed during this reaction. The right cofactor or intermediate involved in this reaction is not indicated by any of the answer choices given in the question.
Nicotinamide adenine dinucleotide (NAD⁺), which is reduced to NADH during the reaction, is the proper cofactor involved in the iso citrate dehydrogenase reaction. Alpha-ketoglutarate is produced when isocitrate is oxidized, and CO₂ is produced as a byproduct of this reaction.
To know more about citrate :
https://brainly.com/question/31594252
#SPJ4
the half-life of caesium-137 is about 30 years. what percent of an initial sample will remain in 100 years? round your answer to the nearest tenth. do not include the percent sign in answer.
Total, 12.5 percent of the initial sample of caesium-137 will remain after 100 years.
To calculate the percent of an initial sample that will remain after a certain time period, we can use the half-life of the radioactive isotope.
Given;
Half-life of caesium-137 = 30 years
Time period = 100 years
To determine the percent of the initial sample remaining after 100 years, we need to find the number of half-lives that have passed in that time period.
Number of half-lives = Time period / Half-life
Number of half-lives = 100 years/30 years
Number of half-lives ≈ 3.33
Since we cannot have a fraction of a half-life, we round this value down to 3.
After three half-lives, the remaining fraction of the initial sample can be calculated using the equation;
Remaining fraction = [tex](1/2)^{Number of half-lives}[/tex]
Remaining fraction = (1/2)³
Remaining fraction = 1/8 ≈ 0.125
To convert this fraction to the percentage, we multiply by 100;
Percent remaining = 0.125 × 100 ≈ 12.5
Therefore, approximately 12.5 percent of the initial sample of caesium-137 will remain after 100 years.
To know more about half-life here
https://brainly.com/question/24710827
#SPJ4
What is the major product(s) obtained from the acid- catalyzed hydration of each of the following CH 3
CH 2
CH 2
CH=CH
The major product obtained from the acid-catalyzed hydration of CH3CH2CH2CH=CH2 is 3-pentanol.
Acid-catalyzed hydration is an addition reaction that adds water to an alkene. In this reaction, the double bond of an alkene is broken, and the hydrogen and hydroxyl group are added to the carbons of the double bond, thus forming an alcohol. The major product obtained from the acid-catalyzed hydration of CH3CH2CH2CH=CH2 is 3-pentanol.3-pentanol is obtained when CH3CH2CH2CH=CH2 is treated with an excess of water in the presence of sulfuric acid (H2SO4) or phosphoric acid (H3PO4).
The hydration of the double bond of the compound forms a carbocation intermediate, which is stabilized by the adjacent carbon atoms, thus increasing the rate of reaction.3-pentanol is an alcohol that is commonly used as a solvent. It is a colorless liquid that is soluble in water and has a mild odor. It is also used in the production of plasticizers and other industrial products.3-pentanol can be further converted to other products such as 3-pentyl acetate or 3-pentyl propionate, which are used as flavorings and fragrances in the food and perfume industries.
To know more about major product visit:-
https://brainly.com/question/30667391
#SPJ11
you have 115.0 ml of a solution of h2so4, but you don't know its concentration. if you titrate the solution with a 2.41-m solution of koh and reach the endpoint when 104.7 ml of the base are added, what is the concentration of the acid?
The concentration of the sulfuric acid (H₂SO₄) solution is approximately 1.09665 M.
To determine the concentration of the sulfuric acid (H₂SO₄) solution, we can use the concept of stoichiometry and the volume of the titrant (KOH) needed to reach the endpoint.
Given;
Volume of H₂SO₄ solution = 115.0 ml
Concentration of KOH solution = 2.41 M
Volume of KOH solution added to reach the endpoint = 104.7 ml
First, we need to determine the number of moles of KOH added to the solution;
Moles of KOH = Concentration of KOH × Volume of KOH solution
Moles of KOH = 2.41 M × (104.7 ml / 1000) [Convert ml to liters]
Moles of KOH = 0.25203 moles
According to the balanced chemical equation between H₂SO₄ and KOH, the stoichiometric ratio is 1:2. This means that for every 1 mole of H₂SO₄, 2 moles of KOH are required to neutralize it.
Since 2 moles of KOH are needed to neutralize 1 mole of H₂SO₄, the number of moles of H₂SO₄ in the solution is half of the moles of KOH added.
Moles of H₂SO₄ = 0.25203 moles / 2
Moles of H₂SO₄ = 0.126015 moles
To calculate the concentration of the H₂SO₄ solution, we divide the moles of H₂SO₄ by the volume of the solution in liters:
Concentration of H₂SO₄ = Moles of H₂SO₄ / Volume of H₂SO₄ solution
Concentration of H₂SO₄ = 0.126015 moles / (115.0 ml / 1000) [Convert ml to liters]
Concentration of H₂SO₄ = 1.09665 M
Therefore, the concentration of the sulfuric acid (H₂SO₄) solution is approximately 1.09665 M.
To know more about concentration here
https://brainly.com/question/30862855
#SPJ4
Use only dimensional analysis to solve this problem. Include a number, unit, and substance in the numerator and the denominator for every conversion fraction used. A solution is prepared by dissolving solid iron(III) bromide in water. If the solution has a concentration of 0.438MFeBr 3
then how many grams of iron(III) bromide were dissolved in a 75.0 mL sample of this solution?
The mass (in grams) of iron(III) bromide, FeBr₃ dissolved in the 75.0 mL solution is 9.72 grams
How do i determine the mass of FeBr₃ dissolved in the solution?First, we shall obtain the mole of FeBr₃ in the solution. Details below:
Volume = 75.0 mL = 75 / 1000 = 0.075 LMolarity of FeBr₃ = 0.438 MMole of FeBr₃ =?Mole of FeBr₃ = molarity × volume
= 0.438 × 0.075
= 0.03285 mole
Finally, we shall determine the mass of FeBr₃ in the solution. Details below:
Mole of FeBr₃ = 0.03285 moleMolar mass of FeBr₃ = 295.85 g/molMass of FeBr₃ = ?Mass of FeBr₃ = Mole × molar mass
= 0.03285 × 295.85
= 9.72 grams
Thus, the mass of iron(III) bromide, FeBr₃ dissolved in the solution is 9.72 grams
Learn more about mass:
https://brainly.com/question/21940152
#SPJ4
Isopropyl alcohol is mixed with water to produce a solution that is 36.0% alcohol by volume. How many milliliters of each component are present in 815 mL of this solution? alcohol: water: 311.4 Incorr
Volume of water = 521.6 mL.The given concentration of isopropyl alcohol is 36.0% by volume.
Solution: To find out the required milliliters of each component, we will first find the number of milliliters of isopropyl alcohol and water present in the solution.
Volume fraction of isopropyl alcohol= 36.0%
By definition, volume fraction is the ratio of the volume of the solute (isopropyl alcohol) to the volume of the solution.
Volume fraction = (Volume of solute / Volume of solution) x 100We can write the above formula as,
Volume of solute = Volume fraction x Volume of solution Volume of isopropyl alcohol= 36.0% x 815 mL
Volume of isopropyl alcohol= 293.4 mL As we know, total volume of the solution is 815 mL.
So, Volume of water = Total volume of the solution - Volume of isopropyl alcohol Volume of water = 815 mL - 293.4 mL Volume of water = 521.6 mL.
To know more about concentration visit:-
https://brainly.com/question/30862855
#SPJ11
What types of intermolecular forces are present in the following compound? CH 3
CH 2
Cl (Select all that apply.) induced dipole-induced dipole (London or dispersion) dipole-dipole hydrogen bonding
The intermolecular forces present in CH3CH2Cl are:
- Dipole-dipole interactions
- London dispersion forces
CH3CH2Cl is an organic compound with a chlorine atom bonded to the second carbon atom in the chain. This molecule exhibits both dipole-dipole interactions and London dispersion forces.
Dipole-dipole interactions: CH3CH2Cl is a polar molecule because the chlorine atom is more electronegative than the carbon and hydrogen atoms.
This creates a permanent dipole moment, with the chlorine atom being partially negative and the carbon and hydrogen atoms being partially positive.
The dipole-dipole interactions occur between the partially positive hydrogen atoms of one molecule and the partially negative chlorine atom of another molecule.
London dispersion forces: In addition to dipole-dipole interactions, CH3CH2Cl also experiences London dispersion forces.
These forces are caused by temporary fluctuations in electron distribution, resulting in the formation of temporary dipoles. These temporary dipoles induce dipoles in neighboring molecules, leading to attractive forces between them.
Hydrogen bonding: Although CH3CH2Cl contains hydrogen atoms, it does not have a hydrogen atom bonded directly to a highly electronegative atom such as nitrogen, oxygen, or fluorine.
Hydrogen bonding requires a hydrogen atom bonded to one of these highly electronegative atoms, so it is not present in CH3CH2Cl.
To know more about "Dipole moment" refer here:
https://brainly.com/question/14119304#
#SPJ11
Assuming the unknown is approximately 35%CaCO 3
by mass (unless otherwise specified by your instructor), compute the mass of that sample which should be dissolved in a volume of 250 mL in order that a 25.00 mL aliquot requires 20 mL of titrant (EDTA) be used.
The mass of the sample that should be dissolved is approximately 8.72 grams.
Given:
Volume of the sample solution: 250 mL
Volume of the aliquot (sample taken for titration): 25.00 mL
Volume of titrant (EDTA) used: 20 mL
Concentration of EDTA: 0.017 M
Moles of EDTA used in the titration:
Moles of EDTA = 20 mL × (1 L / 1000 mL) × 0.017 mol/L
Moles of EDTA = 0.00034 mol
Mass of CaCO₃ in the aliquot:
Mass of CaCO₃ = Moles of CaCO₃ × Molar mass of CaCO₃
Mass of CaCO₃ = 0.00034 mol × 100.09 g/mol
Mass of CaCO₃ = 0.034 g
Total moles in the sample:
Total moles in the sample = (35 g/L / 100.09 g/mol) × (250 mL / 1000 mL/L)
Total moles in the sample = 0.08722 mol
Mass of the sample dissolved:
Mass of the sample = (Mass of CaCO3 / Moles of CaCO3) × Total moles in the sample
Mass of the sample = (0.034 g / 0.00034 mol) × 0.08722 mol
Mass of the sample = 8.72 g
Therefore, the mass of the sample that should be dissolved is approximately 8.72 grams.
Learn more about EDTA from the link given below.
https://brainly.com/question/19578745
#SPJ4
Draw Lewis structures for each of the following structures and assign formal charges to each atom: a) SF 2
b) NH2OH(N and O are bonded to one another)
The Lewis structure for SF₂ shows sulfur (S) bonded to two fluorine (F) atoms, with each atom having a formal charge of 0, while the Lewis structure for NH₂OH displays nitrogen (N) bonded to two hydrogen (H) atoms and an oxygen (O) atom, with all atoms having a formal charge of 0.
A) The Lewis structure of SF₂ is as follows:
F
|
S-F
The formal charges for each atom can be determined by comparing the number of valence electrons in the Lewis structure with the number of valence electrons in the neutral atom. In SF₂, sulfur (S) has six valence electrons and each fluorine (F) has seven valence electrons. Since the sulfur atom is bonded to two fluorine atoms, it uses two of its valence electrons for bonding, leaving four valence electrons. Each fluorine atom contributes one electron to the bond.
To assign formal charges, we use the formula: Formal charge = (Number of valence electrons in the neutral atom) - (Number of lone pair electrons) - (Number of shared electrons/2)
For SF₂, each fluorine atom has a formal charge of 0, while the sulfur atom has a formal charge of 0.
b) The Lewis structure of NH₂OH is as follows:
H
|
H - N - O - H
|
H
The formal charges can be determined similarly. Nitrogen (N) has five valence electrons, each hydrogen (H) has one valence electron, and oxygen (O) has six valence electrons. Nitrogen forms three bonds and has one lone pair of electrons, while oxygen forms two bonds and has two lone pairs of electrons.
The formal charges for each atom in NH₂OH are as follows: Nitrogen: 0, Oxygen: 0, and each Hydrogen: 0.
learn more about Lewis structure here:
https://brainly.com/question/6694938
#SPJ11
What will be the pressure of 1.50 mol of an ideal gas at a temperature of 24.5 °C and a volume of 62.1 L? Use R=0.0821 atm. L/mol K atm
The pressure of 1.50 mol of an ideal gas at a temperature of 24.5 °C and a volume of 62.1 L is 1.66 atm.
To calculate the pressure of the gas, we can use the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the ideal gas constant, and T is the temperature.
First, we need to convert the given temperature from Celsius to Kelvin by adding 273.15:
T = 24.5 °C + 273.15 = 297.65 K
Next, we rearrange the ideal gas law equation to solve for P:
P = (nRT) / V
Plugging in the values, we have:
P = (1.50 mol) * (0.0821 atm·L/mol·K) * (297.65 K) / (62.1 L) ≈ 1.66 atm
learn more about Ideal gas law here:
https://brainly.com/question/30458409
#SPJ11
A binary compound contains chromium and iodine and has a mass of 8.301 grams. If the compound contains 12.05% chromium, calculate the mass of iodine used to form the compound and it's empirical formula.
The empirical formula of the compound is [tex]CrI_3[/tex], indicating that it contains one chromium atom and three iodine atoms.
To calculate the mass of iodine used to form the compound, we first need to determine the mass of chromium present. Since the compound contains 12.05% chromium, we can calculate it as follows:
Mass of chromium = (12.05% / 100) * 8.301 grams
= 0.1205 * 8.301 grams
= 1.0004 grams
Next, we can calculate the mass of iodine by subtracting the mass of chromium from the total mass of the compound:
Mass of iodine = Total mass of compound - Mass of chromium
= 8.301 grams - 1.0004 grams
= 7.3006 grams
To determine the empirical formula, we need to convert the masses of chromium and iodine to moles by dividing them by their respective atomic masses. The atomic mass of chromium is 51.996 grams/mol, and the atomic mass of iodine is 126.904 grams/mol.
Moles of chromium = Mass of chromium / Atomic mass of chromium
= 1.0004 grams / 51.996 grams/mol
= 0.01924 mol
Moles of iodine = Mass of iodine / Atomic mass of iodine
= 7.3006 grams / 126.904 grams/mol
= 0.05751 mol
Now, we need to find the simplest whole number ratio between the moles of chromium and iodine. Dividing both values by the smaller value (0.01924 mol), we get:
Moles of chromium = 1.0000 = 1
Moles of iodine = 0.05751 / 0.01924 = 2.992 = 3
To know more about empirical formula refer here
https://brainly.com/question/32125056#
#SPJ11
An arctic weather balloon is filled with 5.82 L. of helium pas inside a prep shed. The temperature inside the shed is 8 . ∘
C. The batioon is then taken outside, where the temperature is −32. ∘
C. Calculate the new volume of the balloon. You may assume the pressure on the balloon stays constant at exactly 1 atm. Be sure your answer has the correct number of significant digits.
The new volume of the balloon is 6.35 L.
To solve this problem, we can use the ideal gas law, which states that PV = nRT, where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.
First, we need to convert the temperatures from Celsius to Kelvin. The temperature inside the shed is 8°C, which is equivalent to 8 + 273.15 = 281.15 K. The temperature outside is -32°C, which is equivalent to -32 + 273.15 = 241.15 K.
Since the pressure is assumed to remain constant at 1 atm, we can rewrite the ideal gas law as V1/T1 = V2/T2, where V1 and T1 are the initial volume and temperature inside the shed, and V2 and T2 are the final volume and temperature outside.
Substituting the values, we have V1/281.15 K = V2/241.15 K. Rearranging the equation to solve for V2, we get V2 = V1 * T2 / T1.
Plugging in the values, V2 = 5.82 L * 241.15 K / 281.15 K ≈ 6.35 L.
Therefore, the new volume of the balloon is approximately 6.35 L.
To learn more about volume here:
https://brainly.com/question/28058531
#SPJ11
An electrochemical cell has a standard cell potential of E ∘
=−0.081 V with n=1 (number of electrons in balanced redox reaction). What is the equibrium constant, K, for the electrocherrical cell reaction at 298× ? K=34.2
K=83.2
K=23.4
K=43.2
The equilibrium constant, K, for the electrochemical cell reaction is K = 43.2. The correct option is D.
The standard cell potential, E°, is related to the equilibrium constant, K, through the Nernst equation:
E = E° - (RT/nF) * ln(K)
In the given question, the standard cell potential, E°, is -0.081 V, and the number of electrons involved in the balanced redox reaction is n = 1. We are asked to determine the equilibrium constant, K.
R represents the gas constant (8.314 J/(mol·K)), T is the temperature in Kelvin (298 K), and F is the Faraday constant (96485 C/mol).
Substituting the given values into the Nernst equation and rearranging, we have:
ln(K) = (E° - E) * (nF/RT)
ln(K) = (-0.081 - E) * (96485/8.314*298)
Simplifying the expression further, we find:
ln(K) = (-0.081 - E) * 39.195
To solve for K, we need to take the exponential of both sides of the equation:
K = e^(ln(K))
Finally, substituting the given values of E and calculating the value of K, we find K ≈ 43.2. Therefore, the equilibrium constant for the electrochemical cell reaction is approximately 43.2. Option D is the correct one.
To know more about Nernst equation refer here:
https://brainly.com/question/31593791#
#SPJ11
Match the following aqueous solutions with the appropriate letter from the column on the right. Assume complete dissociation of electrolytes. 1.0.13 mCr(NO 3
) 3
A. Lowest freezing point 2. 0.16 m(NH 4
) 2
S B. Second lowest freezing point 3. 0.18 mCr(NO 3
) 2
C. Third lowest freezing point 4.0.56 m Urea (nonelectrolyte) D. Highest freezing point Match the following aqueous solutions with the appropriate letter from the column on the right. Assume complete dissociation of electrolytes. 1.0.10 mK 2
S
2.0.11 mBaCl 2
3. 0.18mNaNO 3
4. 0.39 m Sucrose (nonelectrolyte)
A. Lowest freezing point B. Second lowest freezing point C. Third lowest freezing point D. Highest freezing point
Freezing point depression occurs when a solute is added to a solvent, reducing the freezing point of the solution compared to the pure solvent. The extent of freezing point depression depends on the concentration of the solute particles in the solution.
In this case, we are given different solutions and asked to match them with their respective freezing points. Let's go through each solution and determine their freezing points:
1. 0.13 mCr(NO3)3:
Cr(NO3)3 is an electrolyte that dissociates into ions when dissolved in water. Since it dissociates into 4 ions (1 Cr3+ and 3 NO3-), it will cause a greater freezing point depression compared to other electrolytes with fewer ions. Therefore, it will have the **lowest freezing point** (option A).
2. 0.16 m(NH4)2S:
(NH4)2S is also an electrolyte that dissociates into ions. However, it only produces 3 ions (2 NH4+ and 1 S2-). Since it has fewer ions compared to Cr(NO3)3, it will have a **second lowest freezing point** (option B).
3. 0.18 mCr(NO3)2:
Cr(NO3)2 is another electrolyte that dissociates into ions. It produces 3 ions (1 Cr2+ and 2 NO3-). Since it has fewer ions compared to (NH4)2S, it will have a **third lowest freezing point** (option C).
4. 0.56 m Urea (nonelectrolyte):
Urea is a nonelectrolyte, which means it does not dissociate into ions when dissolved in water. Since it does not produce ions, it will not cause any freezing point depression. Therefore, it will have the **highest freezing point** (option D).
In summary, the matching between the aqueous solutions and their freezing points is as follows:
1. 0.13 mCr(NO3)3 - A. Lowest freezing point
2. 0.16 m(NH4)2S - B. Second lowest freezing point
3. 0.18 mCr(NO3)2 - C. Third lowest freezing point
4. 0.56 m Urea - D. Highest freezing point
To know more about Freezing Point Depression visit:
https://brainly.com/question/2292439
#SPJ11
For each bond, show the direction of polarity by selecting the correct partial charges. I-Cl F−I F⋅Cl The most polar bond is For each bond, show the direction of polarity by selecting the correct partial charges The most polar bond is 9 more grocsp attempts remaining
The most polar bond is F−I.
To determine the direction of polarity in each bond, we need to consider the electronegativity difference between the atoms involved. The more electronegative atom will have a partial negative charge, while the less electronegative atom will have a partial positive charge.
In the bond I-Cl, chlorine (Cl) is more electronegative than iodine (I), so the partial charges are δ− for Cl and δ+ for I.
In the bond F−I, fluorine (F) is more electronegative than iodine (I), so the partial charges are δ− for F and δ+ for I.
In the bond F⋅Cl, both fluorine (F) and chlorine (Cl) are highly electronegative. However, the dot (⋅) indicates that this bond represents a radical or a single unpaired electron, and it does not have a clear polarity in terms of partial charges.
Comparing the three bonds, F−I has the largest electronegativity difference, making it the most polar bond with the largest separation of partial charges.
To know more about "Electronegativity" refer here:
https://brainly.com/question/10531792#
#SPJ11
Calculate the [H3O+]and [OH−]for a solution with the following pH values: 2.50 Express your answers using two significant figures separated by a comma. Part B 6.16 Express your answers using two significant figures separated by a comma. Part C 7.8 Express your answers using one significant figure separated by a comma.
For a solution with a pH of 2.50, the [H₃O⁺] is 3.2 x 10⁻³ M, and the [OH⁻] is 3.1 x 10⁻¹² M.
For a solution with a pH of 6.16, the [H₃O⁺] is 2.3 x 10⁻⁷ M, and the [OH⁻] is 4.3 x 10⁻⁸ M.
For a solution with a pH of 7.8, the [H₃O⁺] is 1.6 x 10⁻⁸ M, and the [OH⁻] is 6.3 x 10⁻⁷ M.
To calculate the [H₃O⁺] and [OH⁻] for a given pH, we can use the relationship between pH, [H₃O⁺], and [OH⁻]. The pH is defined as the negative logarithm (base 10) of the [H₃O⁺] concentration: pH = -log[H₃O⁺].
1. For a solution with a pH of 2.50:
Using the pH value, we can calculate the [H₃O⁺] by taking the antilog of the negative pH value: [H₃O⁺] = 10^(-pH). Therefore, [H₃O⁺] = 10^(-2.50) = 3.2 x 10⁻³ M. Since water is neutral, we can calculate the [OH⁻] using the relationship: [H₃O⁺] × [OH⁻] = 1.0 x 10⁻¹⁴. Rearranging the equation, [OH⁻] = 1.0 x 10⁻¹⁴ / [H₃O⁺] = 1.0 x 10⁻¹⁴ / 3.2 x 10⁻³ = 3.1 x 10⁻¹² M.
2. For a solution with a pH of 6.16:
Using the same approach, we find [H₃O⁺] = 10^(-6.16) = 2.3 x 10⁻⁷ M. Similarly, [OH⁻] = 1.0 x 10⁻¹⁴ / [H₃O⁺] = 1.0 x 10⁻¹⁴ / 2.3 x 10⁻⁷ = 4.3 x 10⁻⁸ M.
3. For a solution with a pH of 7.8:
Again, [H₃O⁺] = 10^(-7.8) = 1.6 x 10⁻⁸ M. And [OH⁻] = 1.0 x 10⁻¹⁴ / [H₃O⁺] = 1.0 x 10⁻¹⁴ / 1.6 x 10⁻⁸ = 6.3 x 10⁻⁷ M.
These calculations demonstrate how to determine the [H₃O⁺] and [OH⁻] concentrations based on the given pH values, using the relationships between pH, [H₃O⁺], and [OH⁻].
To know more about negative logarithm refer here:
https://brainly.com/question/30287515#
#SPJ11
12. Determine the number of moles of boric acid that react in the equation to produce 10 moles of water.
In the preceding equation, 6.67 moles of boric acid ([tex]H_3BO_3[/tex]) will react to generate 10 moles of water ([tex]H_2O[/tex]).
To determine the number of moles of boric acid that react in the equation to produce 10 moles of water, we need to examine the balanced chemical equation and use stoichiometry.
1. Begin by examining the balanced chemical equation for the reaction involving boric acid and water. Let's assume the equation is:
[tex]3H_2O[/tex] + [tex]3H_2O[/tex] -> [tex]B_2O_3[/tex] + [tex]6H_2O[/tex]
2. From the balanced equation, we can see that 2 moles of boric acid (H3BO3) react with 3 moles of water ([tex]H_2O[/tex]) to produce 6 moles of water ([tex]H_2O[/tex]).
3. Use the given information that 10 moles of water ([tex]H_2O[/tex]) are produced. Since the stoichiometric ratio between boric acid and water is 2:3, we can set up a proportion to find the number of moles of boric acid:
2 moles [tex]H_3BO_3[/tex] / 3 moles [tex]H_2O[/tex] = x moles [tex]H_3BO_3[/tex] / 10 moles [tex]H_2O[/tex]
4. Cross-multiply and solve for x:
(2 moles [tex]H_3BO_3[/tex])(10 moles [tex]H_2O[/tex]) = (3 moles [tex]H_2O[/tex])(x moles [tex]H_3BO_3[/tex])
20 moles [tex]H_2O[/tex] = 3x moles [tex]H_3BO_3[/tex]
5. Divide both sides of the equation by 3 to isolate x:
x moles [tex]H_3BO_3[/tex] = (20 moles [tex]H_2O[/tex]) / 3
6. Calculate the value of x:
x moles [tex]H_3BO_3[/tex] ≈ 6.67 moles [tex]H_3BO_3[/tex]
Therefore, approximately 6.67 moles of boric acid ([tex]H_3BO_3[/tex]) will react to produce 10 moles of water ([tex]H_2O[/tex]) in the given equation.
For more such questions on boric acid, click on:
https://brainly.com/question/28503610
#SPJ8
What is the empirical formula for a sample that contains 0.9 mol
of C, 1.8 mol of H, and 0.90 mol of Cl?
Fill in the coefficient for each atom below
C
Cl
H
The empirical formula for the sample is: C1H2Cl1
To determine the empirical formula, we need to find the simplest whole number ratio of atoms in the compound.
Given that we have 0.9 mol of C, 1.8 mol of H, and 0.90 mol of Cl, we need to find the ratio by dividing each value by the smallest value among them.
In this case, the smallest value is 0.9 mol.
Dividing each value by 0.9 mol:
C: 0.9 mol ÷ 0.9 mol = 1
H: 1.8 mol ÷ 0.9 mol = 2
Cl: 0.9 mol ÷ 0.9 mol = 1
Therefore, the empirical formula for the sample is: C1H2Cl1
For such more questions on empirical formula
https://brainly.com/question/1603500
#SPJ8
Show that a molecular orbital of the form A sin θ + B cos θ is normalized to 1 if the orbitals A and B are each normalized to 1 and S = 0. What linear combination of A and B is orthogonal to this combination?
The orthogonal linear combination of A and B is C = (1/√a)B - (1/√a²)A.
A molecular orbital of the form A sin θ + B cos θ is normalized to 1 if the orbitals A and B are each normalized to 1 and S = 0.To show that A sin θ + B cos θ is normalized to 1, we need to prove that ∫(A sin θ + B cos θ)²dτ = 1
For the normalization of orbitals A and B, ∫A²dτ = 1 and ∫B²dτ = 1 . Also, given that. S = 0∫A B dτ = 0
Now,∫(A sin θ + B cos θ)²dτ= ∫A²sin²θ dτ + ∫B²cos²θ dτ + 2AB
∫sinθ cosθ dτ= A²∫sin²θ dτ + B²∫cos²θ dτ
As sin²θ + cos²θ = 1,∫(A sin θ + B cos θ)²dτ= A² + B² = 1
Therefore, A² = 1 - B²
Now, to find the linear combination of A and B that is orthogonal to the combination A sin θ + B cos θ, we need to take the dot product of A sin θ + B cos θ with a linear combination of A and B. Let this combination be C = aA + bB.
Then,∫(A sin θ + B cos θ)(aA + bB)dτ= a∫A²sinθ dτ + b∫ABcosθ dτSince
∫A²dτ = 1 and ∫ABdτ = 0,∫(A sin θ + B cos θ)(aA + bB)dτ = aA² = a(1 - B²) = a - ab²
Now, for the combination aA + bB to be orthogonal to A sin θ + B cos θ, the dot product must be 0.∴ a - ab² = 0 ⇒ a = ab² ⇒ b = 1/√a
Thus, the orthogonal linear combination of A and B is C = (1/√a)B - (1/√a²)A.
To know more about orthogonal click on below link :
https://brainly.com/question/32196772#
#SPJ11
14. Draw the structures corresponding to the following names: a) Cyclohexylamine b) \( N, N- \) Dimethylbutylamine
The amino group is bonded to the carbon atom in the ring, which is designated as 1-amino-cyclohexane. When naming this compound, we begin by identifying the longest chain, which is five carbon atoms long.
(a) Cyclohexylamine:The structure corresponding to the name Cyclohexylamine is shown below: The prefix cyclo- indicates a cyclic compound with six carbons in this case, and the suffix -amine denotes that it is an amine compound. The amino group is bonded to the carbon atom in the ring, which is designated as 1-amino-cyclohexane.
(b) \(N,N-\) Dimethylbutylamine:When naming this compound, we begin by identifying the longest chain, which is five carbon atoms long. The -yl ending comes from the pentane, and the amine group (-NH2) replaces a hydrogen atom on one of the carbon atoms. Since we have two methyl groups on nitrogen, we must include N,N-dimethyl at the start of the name. The nitrogen atom must be included in the main chain's numbering, thus the name is 2-(N,N-dimethylamino)pentane:Notice that the carbon atom bearing the amino group is now denoted as carbon number 2, not carbon number 1, since we are now numbering from the left-hand side to the right-hand side of the molecule.
To know more about compound:
https://brainly.com/question/14117795
#SPJ11