The exothermic reaction between solid aluminium powder and solid manganese (IV) oxide, produces solid manganese and
another product. How many moles of aluminium powder are needed to produce 203.7 grams of manganese?

Answers

Answer 1

The number of moles of aluminum powder needed to produce 203.7 grams of manganese is 5 moles.

How to calculate the number of moles of Aluminium powder?

Heat, Mn, and Al2O3 are produced when aluminum powder and manganese dioxide are heated.

[tex]3MnO_{2} + 4Al - > 3Mn + 2Al_{2} O_{3} + Heat[/tex]

The balanced chemical equation in this situation indicates that there are 3 moles of manganese and 4 moles of aluminum involved in the reaction, which results in a 3:4 mole ratio.

You may make use of this mole ratio by calculating how many moles of aluminum are required to react with the 203.7g of Manganese. So,

Firstly, the mass of Aluminium has to be taken out

Let the mass be considered x.

So, the number of moles of Aluminium = x/27

Number of moles of Manganese = 203.7/54

Hence, the mass x will be,

[tex]x = 4 *203.7 * 27 / 3 * 54[/tex]

[tex]x = 135.8g[/tex]

Hence,  the number of moles of Aluminium is = 135.8/27 = 5 moles.

To learn more about the Calculation of a number of moles refer to:

https://brainly.com/question/15321053

#SPJ10                                                                            


Related Questions

What is a quantum of light energy called?
O A. A photon
OB. A frequency
O C. A proton
O D. An electron

Answers

Answer:

A) photon

Explanation:

hope it helps and give brainliest if its correct

Answer:

Photon

Explanation:

please mark brainliest please

The energy produced by the snack in an experiment is calculated to be 41,800 J/g. What is the energy of the snack in Calories/
gram?

snack energy = [?] Cal/g or kcal/g

remember there are 4.18J per 1 calorie

Answers

The energy of the snack in calories per gram is 9983.3 Calories/gram.

What is the energy of a snack?

The energy that is contained in a snack is obtained from a calorimeter when the snack is burnt in a calorimeter. The mass of the snack that is burnt is measured in terms of energy output of the calorimeter.

If  1 calorie = 4.18J

x calorie = 41,800 J

x = 41,800 J * 1 calorie/4.18J

x = 9983.3 Calories/gram

Learn ore about energy in food:https://brainly.com/question/9602807

#SPJ1

Mr. Auric Goldfinger, criminal mastermind, intends to smuggle several tons of gold across international borders by disguising it as lumps of iron ore. He commands his engineer minions to form the gold into little spheres with a diameter of exactly
8 cm and paint them black.

However, his chief engineer points out that customs officials will surely notice the unusual weight of the "iron ore" if the balls are made of solid gold (density
). She suggests forming the gold into hollow balls instead , so that the fake "iron ore" has the same density as real iron ore
One of the balls of fake "iron ore," sliced in half.

Calculate the required thickness of the walls of each hollow lump of "iron ore." Be sure your answer has a unit symbol, if necessary, and round it to 2
significant digits.

Answers

The thickness of the walls of each hollow lump of iron ore is: 0.295cm. This is determined using the knowledge of the Volume of a Hollow Sphere.

What is the Volume of a Hollow Sphere?

The formula for the Volume of a Hollow Sphere is give as:

Volume of a Hollow = 4/3 R³ – 4/3 r³

Step 1 - Find the apparent volume of 8cm diameter sphere including the wall the the hollow inside

V = 4/3 r³

V = (4/3) (8)³

V = (4/3) * (22/7) * 512

V = 2145.52cm³

Step 2 - Determine the mass of Gold required for the sphere to achieve the density of iron ore if the apparent volume is as given in Step 1 above.

Recall that Mass = Density * Volume

Mass = 5.15 *  2145.52

Mass = 11049.45

Step 3 - Find volume of gold based on mass calculated in Step 2 above

Recall that :

Volume = Mass/Density

Thus,

V = 11049.4/19.3

Thus, Volume = 572.51cm³

Step 4 - Find the width of the wall of a hollow sphere for the volume realized in step 3

Recall the initial formula:

Volume of a Hollow = 4/3 R³ – 4/3 r³

Thus, 572.51 = (4/3) (8³ - (8 - t)³)

572.51 = (4/3) *(22.7) *(8³ - (8 - t)³)

572.51 = (88/21) *(8³ - (8 - t)³)

Multiply both sides by 21 and we have

88 (512 - (8 - t)³) = 12,022.71

Simplify further
(8 - t)³ = 357.38

t = 0.9035cm

Learn more about Volume of a Hollow Sphere at:
https://brainly.com/question/15244746
#SPJ1

How many moles of LiCl will I have if I start off with .425 moles of CaC12?

Answers

LiOH+CaCl_2—»LiCl+Ca(OH)_2

Balanced

Moles of CaCl_2=0.425mol

1 mol CaCl_2 producees 1 mol LiCl

Moles of LiCl

0.425(1)0.425moles

The equation is

[tex]\\ \tt{:}\dashrightarrow LiOH+CalCl_2\longrightarrow LiCl+Ca(OH)_2[/tex]

This is balanced

1mol of LiCl needs 1 mol CaCl_2

Then

0.425mol of CaCl_2 will produce 0.425mol LiCl

Potassium chlorate decomposes according the following BALANCED equation.
2 KClO3 → 2 KCl + 3O2

How many grams of oxygen gas would be produced if 33.0 g of potassium chlorate react?

Answers

Answer:

12.9 g O₂

Explanation:

To find the mass of oxygen gas produced, you need to (1) convert grams KClO₃ to moles KClO₃ (via molar mass from periodic table values), then (2) convert moles KClO₃ to moles O₂ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles O₂ to grams O₂ (via molar mass). It is important to arrange the conversions/ratios in a way that allows for the cancellation of units (the desired unit should be in the numerator). The final answer should have 3 sig figs to match the given value (33.0 g).

Molar Mass (KClO₃): 39.098 g/mol + 35.45 g/mol + 3(15.998 g/mol)

Molar Mass (KClO): 122.542 g/mol

2 KClO₃ ---> 2 KCl + 3 O₂

Molar Mass (O₂): 2(15.998 g/mol)

Molar Mass (O): 31.996 g/mol

33.0 g KClO₃           1 mole                 3 moles O₂            31.996 g
--------------------  x  -------------------  x  -----------------------  x  ------------------  =
                               122.542 g          2 moles KClO₃            1 mole

=  12.9 g O₂

Explain the large variation in boiling temperatures, given the small range in Me values.

Answers

Answer:

32.0 is the answer which is divide able to 65 or -85

Consider the compound calcium nitrate, Ca(NO3)2. Which statements are true about this compound? Check all that apply. There are two atoms of oxygen. There are six atoms of oxygen. There are two nitrogen atoms. There are two calcium atoms.

Answers

Calcium nitrate is made up of 6 oxygen atoms, 2 nitrogen atoms and one calcium atom.

Ca(NO₃)₂

Calcium nitrate is a compound consisting of calcium, nitrogen and oxygen compoundsIt is an inorganic compoundIt is water-absorbent and absorbs moisture from airCalcium nitrate has two forms, hydrous and anhydrousBoth forms are colourless and odourlessThe reaction to form Calcium nitrate is Ca + 2NO₃ -----> Ca(NO₃)₂

The number of oxygen atoms is: 2x3 = 6The number of nitrogen atoms is: 2x1= 1There is 1 calcium atom

Thus, calcium nitrate is made up of 6 oxygen atoms, 2 nitrogen atoms and one calcium atom.

Learn more about calcium nitrate reactions here:

https://brainly.com/question/17171430

#SPJ10

Answer:

B)There are six atoms of oxygen.

C)There are two nitrogen atoms.

Explanation:

edge 2023

Which of the following lists describes characteristics of a base?
Bitter taste, low pH, and dissolves metals
Sour taste, high pH, and caustic
Sour taste, low pH, and slippery
Slippery, high pH, and caustic

Answers

Answer:

Option D

Explanation:

Bases are caustic

sour taste refers to acid hence B is wrong

Bases have pH higher than 7 so D is the correct answer

Answer:

Slippery, high pH, and caustic

(last option listed)

Explanation:

sour taste - acid feature

pH < 7 - acid feature [low pH]

dissolves metal - strong acid feature

bitter taste - base feature

slippery feel - base feature

pH > 7 - base feature [high pH]

dissolves metal - strong base feature

[essentially, traits of base can be described as opposites of acid traits]

So, if you combine these traits, "Slippery, high pH, and caustic" best describes characteristics of a base

How many grams of NaCl can be created from 9.8 moles of HCl? (molar mass of NaCl= 58.44g, HCl=36.46g)

Answers

The mass of NaCl that can be produced from 9.8 moles of HCl is 572.712 g

Balanced equation

2Na + 2HCl --> 2NaCl + H₂

From the balanced equation above,

2 moles of HCl reacted to produced 2 moles of NaCl.

Therefore,

9.8 moles of HCl will also react to produce 9.8 moles of NaCl

How to determine the mass of NaClMolar mass of NaCl = 58.44 g/molMole of NaCl = 9.8 molesMass of NaCl =?

Mass = mole × molar mass

Mass of NaCl = 9.8 × 58.44

Mass of NaCl = 572.712 g

Learn more about stoichiometry:

https://brainly.com/question/14735801

#SPJ1

Which statement illustrates the difference between a chemical reaction and a nuclear reaction?A nuclear reaction releases more energy per gram and appears to violate the law of conservation of mass.A nuclear reaction releases less energy per gram and appears to violate the law of conservation of mass.A nuclear reaction releases more energy per gram but does not appear to violate the law of conservation of mass.A nuclear reaction releases less energy per gram but does not appear to violate the law of conservation of mass.

Answers

According to the research, a nuclear reaction releases less energy per gram and appears to violate the law of conservation of mass.

What is a nuclear reaction?

It is a procedure that leads to combining and modifying the nuclei of atoms and subatomic particles and appears to violate the law of conservation of mass.

Through this kind of process, the nuclei can be combined or fragmented, absorbing or releasing particles and energy according to each case.

Therefore, we can conclude that according to the research, a nuclear reaction releases less energy per gram and appears to violate the law of conservation of mass.

Learn more about nuclear reactions here: https://brainly.com/question/1480032

#SPJ1

C3 H8=H2O2+CO2 chemically balanced in chemistry ​

Answers

[tex]C_{3} H_{8} +5O_{2}[/tex]→[tex]3CO_{2} +4H_{2} O[/tex]

The given reaction is of complete combustion of propane in presence of oxygen.

Molecular formula of propane gas= [tex]C_{3} H_{8}[/tex]

Combustion is a oxidation of a organic molecule into carbon dioxide and water .

Here oxygen serves as a oxidizing agent and oxidizes propane into carbo dioxide and water molecule.

The unbalanced reaction can be given as:

[tex]C_{3} H_{8} +O_{2}[/tex] →[tex]CO_{2} +H_{2} O[/tex]

Here, 3 carbons are there in propane.

so, 3 carbon dioxide molecules are formed to balance the reaction.

So, when 3 carbon dioxides are formed 3 oxygen molecules also needed.

Due to presence of 8 hydrogen in propane 4 water molecules forms , which contains 4 O means 2 oxygen molecules .

There for, total 5 molecules of oxygen are needed to balance the equation.

The final balanced equation can be given as..

[tex]C_{3} H_{8} +5O_{2}[/tex]→[tex]3CO_{2} +4H_{2} O[/tex]

Learn more about combustion here...

https://brainly.com/question/23992512

#SPJ10

PLEASE HELP FAST! How many grams of NO are formed if 8.3 g of ammonia react with 11.8 g of oxygen? The reaction is 4NH3 + 5O2 --> 4NO + 6H2O.

Options:
A. 8.85 g NO
B. 12.6 g NO
C. 14.6 g NO
D. 9.3 g NO

Answers

The mass of NO produced is 9.3 g; option D.

What mass of NO is produced from the reaction?

The mass of nitrogen (ii) oxide, NO, produced from the reaction is determined from the mole ratio of the reaction.

The mole ratio of ammonia to oxygen from the equation of the reaction is 4 : 5.

moles of oxygen = 11.8/32 = 0.368

moles of ammonia = 8.3/17 = 0.488

Oxygen is the limiting reactant.

Mass of NO produced = 0.369 * 4/5 * 30 = 9.4 g NO

In conclusion, approximately 9.3 g of NO is produced.

Learn more mole ratio at: https://brainly.com/question/19099163

#SPJ1

. What is the relationship between the speed of impact and the dropping height?

Answers

The relation between the speed of impact and the dropping height is

[tex]\rm h =\dfrac{1}{2g}v^2[/tex]

What is Speed of Impact ?

It is defined as the speed of an object when it falls from a height  and makes an impact with the ground or any other object.

As the object is falling from the height , its velocity will be continuously changing

Assuming it has no initial velocity , u = 0

let the final velocity is  [tex]\rm v_f[/tex] = [tex]\rm \sqrt {2gh}[/tex]

the potential energy at the height  h as  mgh

the kinetic energy when it reaches the bottom as  [tex]\rm \dfrac{1}{2}mv^2[/tex]

As the energy is always conserved

 [tex]\rm mgh = \dfrac{1}{2}mv^2[/tex]

[tex]\rm h =\dfrac{1}{2g}v^2[/tex]

This is the relation between the speed of impact and the dropping height.

To know more about Speed of Impact

https://brainly.com/question/15339245

#SPJ1

Look at pic and help

Answers

Answer:

Answer

Explanation:

1) Other gasses / or argon (based on what u took in ur school )

2) oxygen

3? Nitrogen

Answer:

By volume, the dry air (which i'm assuming that's what either the blue or red is) in Earth's atmosphere is about 78.09 percent nitrogen, and 0.93 percent argon (which might be what red is (if the red isn't dry air)). A brew of trace gases accounts for the other 0.03 percent (which I think that might be the yellow), including the greenhouse gases carbon dioxide, methane, nitrous oxide and ozone.

Explanation:

Why did mendeleev leave blank spaces in his version of the periodic table?.

Answers

Answer: He left blank spaces for undiscovered elements to be added to the table.

Explanation:

Answer:

Mendeleev left blank spaces in his version of the periodic table because he left the gaps to place elements not known at the time

Which atomic models(Bohr, Thomson, Rutherford, Dalton) in task 1 are not supported by Thomson’s experimental evidence? For each of these models, explain the experimental results that the model would predict.

Answers

Rutherford model task 1 is not supported by Thomson’s experimental evidence.

What is an atom?

The atom consists of matter that may be split without releasing electrical charges.

It's also the smallest unit of matter with chemical element features. As a result, the atom is the fundamental unit of science.

The nuclear model of the atom was initially put out by Rutherford. His atomic model states that the majority of an atom's volume is empty,

The nucleus, which contains protons and neutrons, is located in the middle of the atom, and its electrons orbit the nucleus in well-defined paths.

If we discuss the research of some other scientists, like Dalton, Neil Bohr, and JJ Thomson, they are all mostly consistent with Rutherford's findings.

For instance, Dalton's atomic theory presupposed that all atoms are roughly the same size and that atoms interact to generate compounds.

According to Rutherford's theory, atoms have a fixed number of electrons that can be shared to create compounds.

The Bohr model, which posits that electrons orbit the nucleus in certain shells, is also consistent with Rutherford's findings, which gave rise to the idea of shells.

If we discuss Thomson's Plum Pudding Model, it describes atoms as negatively charged particles around a soup of positively charged ions. This is also consistent with Rutherford's findings, which show that positive nuclei are surrounded by negative electrons.

Although Rutherford's model was the greatest atomic model, it nevertheless drew on several earlier investigations and was therefore consistent with the outcomes of earlier models.

Hence rutherford model task 1 is not supported by Thomson’s experimental evidence.

To learn more about the atom refer to the link;

https://brainly.com/question/1566330

#SPJ1

the aria ""batter my heart"" from doctor atomic has musical influences from which era?

Answers

The aria ""batter my heart"" from doctor atomic has musical influences from the era of Renaissance.

Why is batter my heart attributed to  to Renaissance era?

The Renaissance era can be regarded as the era around 14th century and batter my heart was produced around the 13/14th century.

The batter my heart was among the Sicilian school of court poets, that was very famous which  emphasizing the importance of the heart.

Learn more about  batter my heart at: https://brainly.com/question/10025363

#SPJ12

what is the approximate partial pressure of oxygen at 1500 m?

Answers

The approximate partial pressure of oxygen at 1500 m is 0.18 atm.

Pressure of the air

From barometric pressure table;

1500 m = 85 kPa

1 kPa = 0.0099 atm

85 kPa = ?

= 0.84 atm

Oxygen percentage in air  = 21%

Partial pressure of oxygen in air

P = 0.21 x P(total)

P = 0.21 x 0.84 atm

P = 0.18 atm

Thus, the approximate partial pressure of oxygen at 1500 m is 0.18 atm.

Learn more about partial pressure here: https://brainly.com/question/19813237

#SPJ11

Silver has the density of 9.32 g/cm^3. Find the length of one side of a 184 g silver cube. Assume now that the silver cube above was melted and reshaped into a sphere. Find the sphere’s diameter

Answers

s = 2.70cm
d = 3.35cm

the physical matter of which living or non living things are composed is called a

Answers

The physical matter of which living or non living things are composed is called a molecule

What is a molecule?

A molecule is the smallest particle of an element or a compound which can normally exist alone and still retain the properties of that substance.

A molecule could be made up of an atom of an element of different atoms of elements such as:

HydrogenOxygenCarbonSodiumPotassiumMagnesium

So therefore, the physical matter of which living or non living things are composed is called a molecule.

Learn more about molecules:

https://brainly.com/question/17150869

#SPJ1

What mass of reactants are used
during the reaction?
Iron + Sulfur➜ Iron Sulfide
27.50 g
? g
Give your answer to the correct number of
significant figures.
(g) Iron + Sulfur

Answers

Answer:

27.50 g

Explanation:

Unless weight was somehow gained/lost during the reaction, the products should weigh as much as the reactants. Since this isn't specified the mass of the reactants should be equal to the mass of the products.

What is surface tension? Describe how surface tension in water is useful for plants and animals.
This is not multiple choice, I need help please :')

Answers

It is a tension created by the attraction of molecules to the surface by the molecules in a bulk of a solution.

The attraction force present between water molecules is cohesion force.

The phenomenon of surface tension provides two major characteristics to the water:

 It makes the surface molecules to be held together  Responsible for formation of water droplet

Plants take water from soil using it's roots , and water is travelling through the xylene tissues present in a plant , so the cohesion forces present in water helps it to travel to the higher places in plants.

While in case of animals, this attraction forces increases the surface density which helps to insects to walk on to the water surface.

Learn more about surface tension here...

https://brainly.com/question/277477

#SPJ10

There are 8.421 g of dry ZnSO4 and
6.579 g H₂O in the sample.

Step 2: Determine the moles of water and anhydrous compound.

Zn = 65.38 g/mol, S = 32.07 g/mol,
H = 1.01 g/mol, O = 16.00 g/mol

How many moles of ZnSO4 are present?

[?] mol ZnSO4

Answers

The number of moles of H₂O is  0.36 mol.

The number of moles of LiClO₄ is  0.0521  mol.

What are moles?

Mole is an important standard unit used for the measurement of large quantities of atoms, molecules, or other particles. One mole is equal to 6.022×10²³ units.

The number of moles of a substance is calculated by:

Moles =[tex]\frac{mass}{molar \;mass}[/tex]

To find the number of moles of H₂O:

Mass of H₂O in the sample = 6.579 g

The molecular weight of H₂O = 18.02g

Moles = [tex]\frac{mass}{molar \;mass}[/tex]

Moles = [tex]\frac{6.579 g}{18.02g}[/tex]

Moles = 0.36

To find the number of moles of [tex]ZnSO_4[/tex]:

Mass of [tex]ZnSO_4[/tex] in the sample = 8.421 g

The molecular weight of [tex]ZnSO_4[/tex]= 161.47 g/mol

Moles =[tex]\frac{mass}{molar \;mass}[/tex]

Moles = [tex]\frac{8.421 g}{161.47 g/mol}[/tex]

Moles = 0.0521 moles

Learn more about moles here:

https://brainly.com/question/8455949

#SPJ1

The liquids having same boiling point cannot be seperated from its mixture by distillation, why?​

Answers

Answer:

Explanation:

They cannot be separated by distillation since it depends on a liquid's ability to boil at a certain temperature. If you have two liquids with the same boiling temperatures, the proportion of each in the vapor phase will be about equal, making it impossible to separate them. Although they presumably do not have the same freezing point, you might use a different method like chromatography or work with their freezing points instead. You could then selectively crystallize one component while leaving the other as a pure liquid.

____________

Definitions:

Distillation:

#1: The volatilization or evaporation and subsequent condensation of a liquid, as when water is boiled in a retort and then the steam is condensed in a cool receiver.

Answer:

Because different compounds often have different boiling points, the components often separate from a mixture when the mixture is distilled. The boiling point is the temperature at which the vapor pressure of the liquid phase of a compound equals the external pressure acting on the surface of the liquid.

Explanation:

if i poured green solution into another test tube and added some copper pieces to the solution will a displacment action occur

Answers

Depends on what kind of ions are present in the green solution

Explanation:

Cr3+, a famous green ion can obviously be displayed by a Cu2+ ion

https://brainly.in/question/47911070

Plants require nitrogen fixed in compounds to grow. A higher the percentage of nitrogen results in improved plant growth. Which compound should you add to your fertilizer to get the best results.

A. N2F2
B. CON2H4
C. (NH4)2SO4
D. NH4NO3

Answers

Explanation:

c and d. I'm not sure which one is better tho

Nitrogen fixation is the part of the nitrogen cycle where the nitrogen is fixed as nitric oxide. Urea {CON₂H₄} should be added to fertilizer to get the best results. Thus, option B is correct.

What are fertilizers?

Fertilizers are substances that are composed of organic and inorganic compounds that are used to provide nutrients to the plants and crops for growth, development, pest, and insect resistance.

The fertilizers mainly comprise nitrogen, potassium, and phosphorus. Urea {CON₂H₄} has the maximum concentration of nitrogen (46%) and will be the most effective.

The other compound ammonium nitrate {NH₄NO₃} contains 34%, ammonium sulfate { (NH₄)₂SO₄} which comprises 21% of nitrogen by mass, whereas N₂F₂ is not used as a fertilizer.

Therefore, option B. Urea {CON₂H₄} is best to use as fertilizer.

Learn more about fertilizers here:

https://brainly.com/question/13121539

#SPJ2

Help me please, is for my finals!!

Answers

Answer: A

Explanation:

9 protons correspond to fluorine.

The first model shows 9 electrons, so the charge is neutral and is thus a fluorine atom.The second model shows 10 electrons, so the charge is -1, meaning is a fluoride ion.

How many grams of
diphosphorus trioxide, P2O3, are
required to react completely with
2.25 moles H₂O?

P2O3 + 3H₂O → 2H3PO3

[?] g P₂03

Answers

From the coefficients of the equation, we know that for every 3 moles of water consumed, 1 mole of diphosphorus trioxide is consumed.

This means we need to find the mass of 0.75 moles of diphosphorus trioxide.

The atomic mass of phosphorous is 30.973761998 g/mol.The atomic mass of oxygen is 15.9994 g/mol.

So, the formula mass of diphosphorus trioxide is:

2(30.973761998)+3(15.9994)=109.945723996 g/mol.

Thus, 0.75 moles have a mass of:

0.75(109.945723996), which is about 82.5 g (to 3 sf)
the answer is 82.5 g P2O3

you can use stoichiometry to solve for this problem. you’re given 2.25 mol H2O and when you look at your chemical reaction, you can see there’s 3 moles of H2O (look at the coefficients) and do the mole ratio. so in the chemical reaction, there’s 1 mol P2O3 and 3 mol H2O. you get your moles with that and since you need it in grams, you need to convert it using the P2O3 molar mass.

Up late, a tired engineer calculated the molar mass of nitroglycerin (C3H5N3O9) to be 193.7 g/mol, but this incorrect. What is the percent error of this incorrect molar mass

Answers

The atomic mass of carbon is 12.011 g/mol.The atomic mass of hydrogen is 1.00794 g/mol.The atomic mass of nitrogen is 14.0007 g/mol.The atomic mass of oxygen is g/mol.

So, the formula mass of nitroglycerin is[tex]3(12.011)+5(1.00794)+3(14.0007)+9(15.9994)=227.0694 \text{ g/mol}}[/tex]

Therefore, the percent error is

[tex]\frac{193.7-227.0694}{227.0694} \times 100=\boxed{-14.70 \% \text{ (to 4 sf)}}[/tex]

The sentences below are things people might say if they were planning to invest or not planning to invest Sort them into the correct categories . am thinking about buying stocks Planning to Invest Not Planning to Invest don't know much about investing can't afford to buy stocks don't really like to take risks need a way to manage my money want to save money for my future

Answers

Investing   :

"I'm considering investing in equities."

"I need a system for handling my finances."

"I need to put money away for the future."

No Investment :

"My knowledge of investment is limited."

"I am unable to purchase stocks."

"I don't particularly enjoy taking chances."

Explanation:

These are accurate because I recently completed the course that taught me these things.

Learn ore about investing and no investment from here :

https://brainly.com/question/4459036?referrer=searchResults

#SPJ10

Other Questions
i do not now these questions Odysseus and Achilles hesitated to show their __________ in the proposed war.a. loyaltyb. daringc. leadership 2 proverb,analogy, and metaphor in rich dad poor dad and their meaning no file pls he height of a rocket a given number of seconds after it is released is modeled by h (t) = negative 16 t squared + 32 t + 10. What does t represent?the number of seconds after the rocket is releasedthe initial height of the rocketthe initial velocity of the rocketthe height of the rocket after t seconds What is the definition of memoir?A)a fictional work that is read by a large number of people B)a nonfictional work that is popular with children and adults C)a narrative that recounts personal experience and development D)a poem that describes the conflict between a character and society Using the following image, solve for JI.J2x + 28x + 225H What were the effects of the reformation Which of the following energy is converted into chemical energy by the chlorophylls?Thermal energyLight energyHeat energyNuclear energy What was the cause of territorial conflict, diplomatic disagreements, and economic rivalries between nations in europe? The tables represent the functions f(x) and g(x). f(x) -5 -2 -1 0 1 2 -3 -1 1 3 w 5 X -3 -2 -1 0 1 2 g(x) -13 -9 -5 -1 3 7 Which input value produces the same output value for the two functions? x = -3 O x = -1 x = 0 Ox=1 The tables represent the functions f ( x ) and g ( x ) . f ( x ) -5 -2 -1 0 1 2 -3 -1 1 3 w 5 X -3 -2 -1 0 1 2 g ( x ) -13 -9 -5 -1 3 7 Which input value produces the same output value for the two functions ? x = -3 O x = -1 x = 0 Ox = 1 What is the length of CD? In this diagram, AABC~ AEDC. A=(3+[tex]\frac{a+\sqrt{a} }{\sqrt{a}+1 }[/tex])(3-[tex]\frac{a-5\sqrt{a} }{\sqrt{5}-5 }[/tex]) The marketing concept that states that a business must find out what consumers want and provide it for them is called the: Multiple choice question. profit orientation product orientation service orientation customer orientation What group was tried at the Nuremberg Trials?A. NazisB. CommunistsC. the LuftwaffeD war criminals from all of the Axis Powers Luis and Raul are playing Odds or Evens. Both friends flip a coin. If both coins land on heads or if both coins land on tails, then Luis wins both coins. If one coin lands on heaNo, the game is not fair because Raul has a higher probability of winning than Luis.Yes, the game is fair because both friends have an equal probability of winning.No, the game is not fair because Luis has a higher probability of winning than Raul.Yes, the game is fair because the friends do not have an equal probability of winning. 100 POINTS. Writers of persuasive texts use a number of techniques to advance their viewpoint and argument. What are some examples of the authors use of false statements and of fallacious reasoning in Sidestepping Student Debt? Use evidence from the text to support your response. Your response should be at least two complete paragraphs. Tomas learned that the product of the polynomials(a + b)(a ab + bf) was a special pattern that wouldresult in a sum of cubes, a3 + b3. His teacherput fourproducts on the board and asked the class to identifywhich product would result in a sum of cubes if a =2x and b = y Consider a business in your neighborhood that you frequent and that you believe is particularly innovative in spite of the products or services themselves not being particularly high-tech. Using the definitions and notions from the text, explain what it is about the business and its operation that you believe makes it innovative? Work out the bearing of D from C.(Hint: bearings are written with three digits.) Please help me 14.7 4.2