Answer: $150
Explanation:
Breakeven point in units sold = 2,000
Variable expenses per unit = 500
Total fixed expenses = $150,000
The break even in units is calculated as:
= Fixed Cost / Contribution per Unit
Therefore,
1000 = 150000/ Contribution per unit
Contribution per Unit will now be:
= 150000 / 1000
= 150
It should be noted that after the break even point, every unit sold will lead to an increase in the contribution per unit to the net operating income. Therefore, the amount that'll be contributed to net operating income by the 2,001st unit sold is $150.
Use the following data to calculate the cost of goods sold for the period:
Beginning Raw Materials Inventory $30,600
Ending Raw Materials Inventory 70,600
Beginning Work in Process Inventory 40,600
Ending Work in Process Inventory 46,600
Beginning Finished Goods Inventory 72,600
Ending Finished Goods Inventory 68,600
Cost of Goods Manufactured for the period 246,600
Answer:
The cost of goods sold for the period is:
= $250,600.
Explanation:
a) Data and Calculations:
Beginning Raw Materials Inventory $30,600
Ending Raw Materials Inventory 70,600
Beginning Work in Process Inventory 40,600
Ending Work in Process Inventory 46,600
Beginning Finished Goods Inventory 72,600
Ending Finished Goods Inventory 68,600
Cost of Goods Manufactured for the period 246,600
To determine the cost of goods sold:
Beginning Finished Goods Inventory $ 72,600
Cost of Goods Manufactured for the period 246,600
Cost of goods available for sale $319,200
Ending Finished Goods Inventory (68,600)
Cost of goods sold $250,600
The manager of the bank where you work tells you that your bank has $6 million in excess reserves. She also tells you that the bank has $400 million in deposits and $362 million in loans. Given this information you find that the reserve requirement must be
Answer and Explanation:
The computation of the reserve requirement is given below;
Required reserves is
= Deposits - loans - excess reserves
= $400 - $362 - $6
= 32 million
And,
Required reserve ratio is
= Required reserves ÷ Deposits
= 32 ÷ 400
= 8%
In this way, it should be determined so that the correct value & percentage could come
A merit good is Multiple Choice Income payments for which no goods or services are exchanged. A good society holds to a higher standard in tax regulations. A good or service that society believes everyone is entitled to a minimal quantity of. A product that serves as an incentive to produce more output.
Answer:
A product that serves as an incentive to produce more output.
Explanation:
Merit goods are those goods that contains the positive externality and it could be generated or produced more and more in the market.
So it is a product that could be treated as the incentive for generating the maximum output and the incentive should be provided by the government
Therefore the last option is correct
Three months ago, Central Supply stock was selling for $51.40 a share. At that time, you purchased five put options on the stock with a strike price of $52 per share and an option price of $0.60 per share. The option expires today when the value of the stock is $42.70 per share. What is your net profit or loss on this investment
Answer:
$4,350
Explanation:
Calculation to determine your net profit or loss on this investment
Net profit = (-$0.60 - $42.70 + $52) × 100 × 5
Net profit= $4,350
Therefore your net profit or loss on this investment is $4,350
A firm sells two products, Regular and Ultra. For every unit of Regular sold, two units of Ultra are sold. The firm's total fixed costs are $1,782,000. Selling prices and cost information for both products follow. The contribution margin per composite unit is:
Answer:
Total Contribution = $52
Explanation:
Given:
Fixed cost = $1,782,000
Product Sales price VC per unit
Regular $20 $8
Ultra $24 $4
Computation:
Contribution = Sales - VC
Contribution on regular product = 20 - 8 = $12
Contribution on ultra product = 24 - 4 = $20
Total Contribution = (1 x 12) + (2 x 20)
Total Contribution = 12 + 40
Total Contribution = $52
Which of the following is not a standard organizational structure
Answer:
sequential
Explanation:
organizational structures come in four general types – functional, divisional, matrix and flat
Sequential is not a standard organizational structure.
What are organizational structures?An organizational structure outlines how tasks are assigned, coordinated, and overseen in order to achieve organizational objectives. The basis upon which standard operating procedures and routines are built is provided by organizational structure.
Organizational structures come in four general types – functional, divisional, matrix, and flat.
To know more about organizational structures refer to :
https://brainly.com/question/23967424
#SPJ2
Cardco Inc. has an annual accounting period that ends on December 31. During the current year a depreciable asset that cost $42,000 was purchased on September 1. The asset has a $4,000 estimated salvage value. The company uses straight-line depreciation and expects the asset to have a five-year life. What is the total depreciation expense for the current year
Answer: $2,533.33
Explanation:
First you need to calculate the annual depreciation:
= (Cost of asset - Salvage value) / Useful life
= (42,000 - 4,000) / 5
= 38,000 / 5
= $7,600
The asset was bought on September 1 and needs to be depreciated for the months of the year it was in the business. That would be September to December which is 4 months.
Depreciation for that year is:
= 7,600 * 4/12 months
= $2,533.33
EcoFabrics has budgeted overhead costs of $1,162,350. It has allocated overhead on a plantwide basis to its two products (wool and cotton) using direct labor hours which are estimated to be 553,500 for the current year. The company has decided to experiment with activity-based costing and has created two activity cost pools and related activity cost drivers. These two cost pools are cutting (cost driver is machine hours) and design (cost driver is number of setups). Overhead allocated to the cutting cost pool is $442,800 and $719,550 is allocated to the design cost pool. Additional information related to these pools is as follows.
Wool Cotton Total
Machine hours 123,000 123,000 246,000
Number of setups 1,230 615 1,845
1. Calculate the overhead rate using activity based costing. (Round answers to 2 decimal places, e.g. 12.25.)
2. Determine the amount of overhead allocated to the wool product line and the cotton product line using activity-based costing.
3. Calculate the overhead rate using traditional approach. (Round answer to 2 decimal places, e.g. 12.25.)
4. What amount of overhead would be allocated to the wool and cotton product lines using the traditional approach, assuming direct labor hours were incurred evenly between the wool and cotton?
Answer:
EcoFabrics
1. Overhead Rates using activity-based costing:
Cutting = $1.80 per machine hour
Design = $390 per setup
2. Allocation of overhead:
Wool Cotton
Cutting $221,400 $221,400
Design 479,700 239,850
Total allocated $701,100 $461,250
3. Overhead rate using the traditional approach:
Predetermined overhead rate = $2.10
4. Allocation of overhead:
Wool Cotton
Total allocated $581,175 $581,175
Explanation:
a) Data and Calculations:
Budgeted overhead costs = $1,162,350
Estimated direct labor hours = 553,500
Activity Cost Cost Drivers Overhead Costs Wool Cotton Total
Pools
Cutting Machine hours $442,800 123,000 123,000 246,000
Design Number of setups 719,550 1,230 615 1,845
1. Overhead Rates using activity-based costing:
Cutting = $1.80 ($442,800/246,000) per machine hour
Design = $390 ($719,550/1,845) per setup
2. Allocation of overhead:
Wool Cotton
Cutting $221,400 ($1.80 * 123,000) $221,400 ($1.80 * 123,000)
Design 479,700 ($390 * 1,230) 239,850 ($390 * 615)
Total allocated $701,100 $461,250
3. Overhead rate using the traditional approach:
Predetermined overhead rate = $2.10 ($1,162,350/553,500)
4. Allocation of overhead:
Wool Cotton
Total allocated $581,175 ($1,162,350 * 50%) $581,175 ($1,162,350 * 50%)
Can someone please help with this question ^▪︎^
Answer:
liability
Explanation:
You own a portfolio equally invested in a risk-free asset and two stocks (If one of the stocks has a beta of 1 and the total portfolio is equally as risky as the market, what must the beta be for the other stock in your portfolio
Answer:
2
Explanation:
Beta measures systemic risk
The higher beta is, the higher the systemic risk and the higher the compensation demanded for by investors
The market has a beta of one. If a portfolio has the same level of systematic risk that is the same as that of the market, its beta would be equal to 1.
If the portfolio is less risky than the market, its beta would be less than one
If the portfolio is more risky than the market, its beta would be greater than one
The beta of a risk free asset is zero
The portfolio's beta can be determined by adding together the weighted beta of each stock in the portfolio
1 = (1/3 x 1) + (1/3 x 0) + (1/3 x s)
1 = 1/3 + (1/3 x s)
1 - 1/3 = 1/3s
2/3 = 1/3s
s = 2/3 x 3 = 2
Let illustrate what you you know about materiality concept.
Answer:
rfb rgab rko
its a study meeting of girls i am also girl here we only study boy were not allowed because he disturb here we only study its safe meeting of girl here we only study
The following data relate to the direct materials cost for the production of 2,200 automobile tires:
Actual: 55,500 lbs. at $1.7 per lb.
Standard: 56,600 lbs. at $1.65 per lb.
Required:
Determine the direct materials price variance, direct materials quantity variance, and total direct materials cost variance.
Answer and Explanation:
The computation is given below:
Direct Material price variance is
= ($1.70 per lb - $1.65 per lb) × 55,500 lbs.
= $2,775 Unfavorable
Direct Material quantity variance is
= (55,500 lbs. - 56,600 lbs.) × $1.65 per lb
= $-1,815 Favorable
Total Direct Materials Cost Varianceis
= Actual Materials Cost - Standard Materials Cost
= (55,500 lbs. × $1.70 per lb) - (56,600 lbs. × $1.65 per lb)
= $94,350 - $93,390
= $960 Unfavorable
A company manufactures aluminum cans for the beverage industry and prepares its financial statements in accordance with International Financial Reporting Standards (IFRS). During its latest full fiscal year, the company recorded the following:
Inventory Item Amount € (thousands)
Raw material aluminum costs 150,000
Storage of finished cans 15,000
Wasted aluminum materials from abnormal production errors during the year 500
Transportation-in costs 640
Tax-related duties 340
Administrative overhead 7,500
Trade discounts due to volume purchases throughout the year 520
The total costs included in inventory (in € thousands) for the year are closest to: ____________
Answer: 150,460 currency units
Explanation:
The costs that are included in inventory include:
Cost of raw materials Transportation in costs Tax duties Trade discountsInventory cost is:
= Cost of raw materials + Transport in costs + Tax duties - Trade discounts
= 150,000 + 640 + 340 - 520
= 150,460 currency units
The book value of long-term assets is reported on:
Question 4
Which of the following is an example of an asset?
O Repairs and Maintenance
Accounts Receivable
o
o Accounts Payable
GST Collected
Answer:
Accounts Receivable
Explanation:
Everything else is a liability
A company has established 5 pounds of Material J at $2 per pound as the standard for the material in its Product Z. The company has just produced 1,000 units of this product, using 5,200 pounds of Material J that cost $9,880.The direct materials price variance is:______.
a. $520 unfavourable.
b. $400 unfavourable.
c. $120 favourable.
d. $520 favourable.
e. $400 favourable.
Answer:
d. $520 favourable.
Explanation:
Calculation to determine what The direct materials price variance is:
Using this formula
Material Price variance= AQ(SP- AP)
Where,
Actual Quantity= 5200
Standard price= $2
Actual Price= $1.9
Let plug in the formula
Material Price variance=5200($2-$1.9)
Material Price variance=5200*$0.1
Material Price variance=$520 Favourable
Therefore The direct materials price variance is:$520 Favourable
Elderly woman purchases a table from a local furniture store for $5,000. She decides she does not want the table because of a defect. The woman successfully cancels the payment on the credit card for payment of the table, and continues to keep the table despite the store requesting to pick the table up from woman. What statement is true:
Answer:
She cannot keep the table
Explanation:
In the given scenario we will look at the different parties and wether they are satisfied with the transaction.
The buyer picked the table after which she complained about a defect and refused to pay. Because she refused to pay she cannot take ownership of the table so she has to return it.
The store did not receive payment for the table so they have the right to request for the table back from the elderly woman.
So she cannot keep the table.
The statement that is true is that she cannot keep the table
In the given scenario, we will look at the different parties and whether they are satisfied with the transaction.
Here, the buyer picked the table after which she complained about a defect and refused to pay. Because she refused to pay she cannot take ownership of the table so she has to return it.
Now, the store did not receive payment for the table so they have the right to request for the table back from the elderly woman.
In conclusion, the statement that is true is that she cannot keep the table
Read more about statement
brainly.com/question/11073037
An electronics company makes communications devices for military contracts. The company just completed two contracts. The navy contract was for 2,540 devices and took 27 workers two weeks (40 hours per week) to complete. The army contract was for 5,940 devices that were produced by 37 workers in three weeks (40 hours per week). a. Calculate the productivity for navy and army contracts in units produced per labor hour.
Answer:
Explanation:
For Navy contract, the total number of man hours put into production will be:
= 27 × 40 × 2
= 2160 man hours
Then, the units produced per labor hour will be:
= 2540 devices / 2160
= 1.176 units per labor hour.
For Army contracts, the total number of man hours put into production will be:
= 37 × 40 × 3
= 4440 man hours
Then, the units produced per labor hour will be:
= 5940/4440
= 1.338 units per labor hour.
XYZ Corporation uses a process costing system to collect costs related to the production of its cola. The cola is first processed in a Mixing Department and is then transferred out and finished up in the Bottling Department. The finished cases of cola are then transferred to Finished Goods Inventory. The following information relates to the company's two departments for the month of January:
Cases of cola in WIP, January 1: Mixing = 10,000; Bottling = 3,000
Cases of cola completed/transferred out during January: Mixing = 77,000; Bottling = ?
Cases of cola in WIP, January 31: Mixing = 4,000; Bottling = 8,000
Required:
How many cases of cola were completed and transferred to Finished Goods Inventory during January:
a. 66,000
b. 71,000
c. 72,000
d. 74,000
A dependency requiring a design be completed before manufacturing can start is an example of a(n):_________
A. Discretionary Dependency.
B. External dependency.
C. Mandatory dependency.
D. Scope dependency.
Answer:
C. Mandatory dependency.
Explanation:
A dependency that requires a design to be completed before manufacturing can begin is an example of a mandatory dependency, which contractually mandates that certain tasks be completed on the design as a requirement.
Mandatory dependency is more used when a project has certain limitations that require the fulfillment of other activities.
On December 31, Jacoby Company's Prepaid Rent account had a balance before adjustment of $6,000. Three months' rent was paid in advance on December 1, the first day of the lease term. The adjusting entry needed on December 31 is:
Answer:
Debit Rent Expense $2,000; credit Prepaid Rent $2,000.
Explanation:
Assuming On December 31, the Company's Prepaid Rent account had a balance before adjustment of the amount of $6,000 which means that if the Three months' rent was paid in advance on December 1, The adjusting entry needed on December 31 is:
Debit Rent Expense $2,000
Credit Prepaid Rent $2,000.
($6000/3month)
(To record Rent Expense)
The following cost behavior patterns describe anticipated manufacturing costs for 2013: raw material, $8.10/unit; direct labor, $11.10/unit; and manufacturing overhead, $373,100 $9.10/unit. Required: If anticipated production for 2013 is 41,000 units, calculate the unit cost using variable costing and absorption costing. (Round your answers to 2 decimal places.)
Answer:
Variable costing $28.3
Absorption costing $37.4
Explanation:
Calculation to determine the unit cost using variable costing and absorption costing.
VARIABLE COSTING
Material $8.10/unit
Direct labor $11.10/unit;
Variable manufacturing overhead per unit $9.10/unit
Units cost $28.3
ABSORPTION COSTING
Material $8.10/unit
Direct labor $11.10/unit;
Variable manufacturing overhead per unit $9.10/unit.
Fixed manufacturing overhead per unit $9.10/unit.
($373,100 ÷ 41,000 units)
Units cost $37.4
Therefore the unit cost using variable costing and absorption costing are:
Variable costing $28.3
Absorption costing $37.4
One large bakery still receives flour in 25-pound bags from their own company's warehouse. They use an average of 5500 bags a year. The production step that uses these bags use 35 bags per day while the usage is 16 bags per day. It costs $12.00 to configure the machines for each run. Annual carrying costs are $7.50 per bag. What will be their average number of bags on hand if they request the EPQ bags in each order
Answer:
48.87 bags
Explanation:
First, we need to calculate the EPQ as follow
EPQ = [tex]\sqrt{\frac{2 D S }{H(1-d/p)}}[/tex]
Where
D = Annual Demand = 5500
S = Setup cost = $12
H = Carrying cost = $7.5
d = Daily usage = 16
p = Daily production = 35
Placing value sinthe formula
EPQ = [tex]\sqrt{\frac{2 X 5500 X 12 }{7.5(1-16/35)}}[/tex]
EPQ = [tex]\sqrt{\frac{132000 }{4.07142857}}[/tex]
EPQ = [tex]\sqrt{32421.05}[/tex]
EPQ = 180.06
Now Calculate the average number of bags in hand as follow
Average Number of Bags = [tex]\frac{EPQ}{2} X ( 1 - d/p )\\[/tex]
Placing values in the formula
Average Number of Bags = [tex]\frac{180.06}{2} X ( 1 - 16/35 )\\[/tex]
Average Number of Bags = 48.87
Brownley Company has one service department and two operating (production) departments. Payroll Department costs are allocated to the two operating departments in proportion to the number of employees in each. Listed below are the operating data for the current period: Department Direct Expenses No.of Employees Payroll $ 26,000 Milling 80,000 52 Assembly 109,600 78 The total cost of operating the Milling Department for the current period is: rev: 12_17_2020_QC_CS-243789 Multiple Choice $90,400. $95,600. $10,400. $15,600. $80,000.
Answer:
$90,400
Explanation:
Calculation to determine Cost of operating mining department
Using this formula
Cost of operating mining department= Direct Cost + Payroll cost allocated
Let plug in the formula
Cost of operating mining department= 80,000 + (26,000/130)*52
(52+78=130)
Cost of operating mining department= 80,000 + $10,400
Cost of operating mining department= $90,400
Therefore Cost of operating mining department is $90,400
Beaver Company (a multi-product firm) produces 5,000 units of Product X each year. Each unit of Product X sells for $8 and has a contribution margin of $5. If Product X is discontinued, $18,000 of fixed overhead would be eliminated. As a result of discontinuing Product X, the company's overall operating income would:_______.
A. Decreaseby $25,000
B. Increase by $43,000
C. Decrease by $7,000
D. Increase by $7,000
Answer:
C. Decrease by $7,000
Explanation:
Calculation to determine what company's overall operating income would Decrease by
Using this formula
Overall operating income =(Product X units*Contribution margin )-Fixed overhead eliminated
Let plug in the formula
Overall operating income=(5,000 units*$5)-$18,000
Overall operating income=$25,000-$18,000
Overall operating income=$7,000 Decrease
Therefore As a result of discontinuing Product X, the company's overall operating income would:Decrease by $7,000
Meyer Company reported the following for its recent year of operation:
From Income Statement:
Depreciation Expense $1,000
Loss on the Sale of Equipment (3,000)
From the comparative balance sheet:
Beginning balance, equipment $12,500
Ending balance, equipment 8,000
Beginning balance, accumulated depreciation 2,000
Ending balance, accumulated depreciation 2,600
No new equipment was purchased during the year. What was the selling price of the equipment?
Answer:
$900
Explanation:
Calculation to determine the selling price of the equipment
First step
Cost of equipment sold = Beginning balance - Ending balance
Cost of equipment sold=$12,500-$8,000
Cost of equipment sold=$4,500
Second step
Ending balance= Beginning balance + Depreciation expense - Accumulated depreciation on equipment sold
Ending balance=$2,000+$1,000-$600
Ending balance=$2,400
Third step
Book value = Cost of equipment sold - Accumulated depreciation on equipment sold
Book value=$4,500-$600
Book value=$3,900
Now let determine the selling price of the equipment
Selling price=$3,000-$3,900
Selling price=$900
Therefore the selling price of the equipment.is $900
If a business adopts a low-cost strategy, it should build a supply chain with ________. Question 43 options: 1) product development skills 2) modular design in products 3) fast transportation 4) buffer stock 5) minimized inventory
Answer:
5) minimized inventory
Explanation:
If a company adopts a low-cost strategy, it must build a supply chain with minimized inventory, which configures that the company is adopting a just-in-time management strategy, which is an administration system whose philosophy is a production system according to demand, avoiding wasted stock and, consequently, unnecessary costs.
If a business adopts a low-cost strategy, it should build a supply chain with 5)minimized inventory.
What is a low-cost strategy?
A pricing strategy in which an employer offers a surprisingly low rate to stimulate the call for and benefit marketplace proportion.
How would you select the right supply chain strategy?Awareness on whether or not your organization offerings a client base that wishes immediate transport of product, or one wherein customers keep in mind that a lead time regularly accompanies their buy order. understand the effect of competition and whether or not maintaining safety stock is important to remain income.
Learn more about low-cost strategy here: https://brainly.com/question/27961763
#SPJ2
Find the amount of each payment to be made into a sinking fund so that enough will be present to accumulate the following amount. Payments are made at the end of each period. The interest rate given is per period.
$77,000; money earns 4.5% compounded monthly for 1-2/3 years
Select one:
a. $719.42
b. $3714.64
c. $758.89
d. $1374.87
b. If you deposit $2000 into a fund paying 4% interest compounded monthly, how much can you withdraw at the end of each month for one year?
a. $177.48
b. $153.36
c. $189.12
d. $170.30
e. none of these
Answer:
Results are below.
Explanation:
a.
Future Value= $77,000
Number of periods= 1*12 + (2/3)*12= 20 months
Interest rate (i)= 0.045/12= 0.00375
To calculate the monthly deposit required, we need to use the following formula:
FV= {A*[(1+i)^n-1]}/i
A= monthly deposit
Isolating A:
A= (FV*i)/{[(1+i)^n]-1}
A= (77,000*0.00375) / [(1.00375^20) - 1]
Monthly deposit= $3,714.64
b.
Monthly deposit= $2,000
Interest rate= 0.04/12= 0.0033
Number of periods= 12 months
To calculate the monthly withdrawal, we need to use the following formula:
Monthly withdraw= (PV*i) / [1 - (1+i)^(-n)]
Monthly withdraw= (2,000*0.0033) / [1 - (1.0033^-12)]
Monthly withdraw= $170.26
. If Canace Company, with a break-even point at $313,500 of sales, has actual sales of $570,000, what is the margin of safety expressed (1) in dollars and (2) as a percentage of sales? Round the percentage to the nearest whole number. 1. $fill in the blank 1 2. fill in the blank 2 % b. If the margin of safety for Canace Company was 25%, fixed costs were $1,419,375, and variable costs were 75% of sales, what was the amount of actual sales (dollars)? (Hint: Determine the break-even in sales dollars first.) $fill in the blank 3
Answer:
Canace Company
a-1) Margin of safety is:
= $256,500.
a-2) Margin of safety is:
= 55%.
b) The amount of actual sales is:
= $5,677,500.
Explanation:
a) Data and Calculations:
Break-even point sales = $313,500
Actual sales = $570,000
Margin of safety = $256,500 ($570,000 - $313,500)
Margin of safety as a percentage of sales = 55% ($313,500/$570,000 * 100)
2) Margin of safety = 25%
Fixed costs = $1,419,375
Break-even point in sales dollars = $1,419,375
Variable costs = 75% of sales
Contribution margin at break-even point = 25% (100% - 75%) = $1,419,375
Actual sales in dollars = $5,677,500 ($1,419,375/25%)
Which of the following is a step in the creation of an Operational Definition?
a. select a sponsor
b. conduct a test to check for potential misinterpretation
c. list the suppliers
d. establish the problem
The answer to the question is D: Establish the problem.
The operational definition gives a meaning to used terminologies and procedures.
In order to create an operational definition, the following steps are necessary for one to take:
You have to have an identification of the features that you want to measure, this is the same as the problem establishment.The next step lies in the selection of the instrument that you intend to useYou have to give a definition of the method of testingStatement of the criteria for decision makingDocumentation of the definitionLastly you have to test the operational definitionRead more at https://brainly.com/question/13402810?referrer=searchResults
