The force of gravity between you and the Earth depends on, your mass, the Earth's mass and the distance beween you and the center of the Earth TrueFalse

The value of k, we can use the equation to find the load L when v = 15 mph: 315 lb

An equation is a mathematical statement that expresses the equality of two expressions. It is composed of two expressions separated by an equal sign (=), with each expression containing at least one variable. Equations can involve addition, subtraction, multiplication, division, and exponents, as well as other mathematical operations. Equations are used to solve problems in many different fields of study, including mathematics, physics, chemistry, and engineering.

The equation that describes the relationship between the load L and the wind speed v is L = kv², where k is a constant.
Since we know that L = 560 lb when v = 20 mph, we can find k by solving for it:
560 = k(20)²
k = 0.14
Now that we know the value of k, we can use the equation to find the load L when v = 15 mph:
L = 0.14(15)²
L = 315 lb

To learn more about equation
https://brainly.com/question/31420744
#SPJ4

Rounded to the nearest kilometer, the satellite travels approximately 8,258 km in 1 hour (option D).

To find the distance the satellite travels in 1 hour, we first need to determine the circumference of its orbit. The satellite orbits at a height of 2,800 km above Earth's surface. Earth's radius is approximately 6,400 km. So, the total radius of the satellite's orbit is 6,400 km + 2,800 km = 9,200 km.

The circumference of a circle can be calculated using the formula C = 2πr, where C is the circumference and r is the radius. In this case, C = 2π(9,200 km) ≈ 57,804.65 km. This is the distance the satellite travels in 7 hours.

To find the distance traveled in 1 hour, we simply divide the total distance by the time in hours: 57,804.65 km ÷ 7 hours ≈ 8,257.8 km. Rounded to the nearest kilometer, the satellite travels approximately 8,258 km in 1 hour. Therefore, the correct answer is option D.

Learn more about satellites here:

https://brainly.com/question/24878669

#SPJ11

(a)Two-source interference maxima would occur at angles of ±45°, ±22.5°, ±67.5°, ±90°, (b) The slit diffraction minima would occur at angles of ±22.5°, ±67.5°, ±90°,(c)The required wavelength for -90° ≤ 0 ≤ 90° is λ ≥ 4a.

Angles are geometric shapes which are formed when two straight lines intersect. They are measured in degrees, and can range from 0° to 360°. Angles are used in mathematics to describe the direction or orientation of objects, and can be used to solve many problems.  Acute angles are those that measure less than 90°, right angles measure 90°, obtuse angles measure more than 90° but less than 180°, and straight angles measure 180°.

a) Without diffraction effects, the angles of 2-source interference maxima will occur when the path difference between the two slits is equal to an integer multiple of the wavelength (A). The path difference between two slits is d, so the angles for the 2-source interference maxima are given by: θ = ± (2π/A) * (d/2)

Since A = d/5, the angles are given by: θ = ± (2π/d) * (d/10) = ± (2π/10)

Therefore, the angles for the 2-source interference maxima are 0°, ± 18°, ± 36°, ± 54° and ± 72°.

b) When diffraction effects due to the slit width are included, the angles for the 2-source interference maxima will be slightly different. The angles of the 2-source interference maxima that are "missing" are 0°, ± 18° and ± 72°.

c) In order for there to be no minima in the single slit diffraction intensity for -90° ≤ 0 ≤ 90°, the wavelength must be greater than the slit.

To learn more about angles

https://brainly.com/question/30313444

#SPJ4

Inductor 1 stores the same amount of energy as inductor 2, although its inductance is only half the inductance of inductor 2. What is the ratio i1/i2 of the currents in the two inductors?

To answer this question, we'll use the formula for the energy stored in an inductor, which is:

Energy (E) = (1/2) * L * I², where L is the inductance, and I is the current.

Since both inductors store the same amount of energy, we have:

(1/2) * L1 * I1² = (1/2) * L₂ * I₂²

Given that the inductance of inductor 1 (L1) is half the inductance of inductor 2 (L₂ ), we can substitute L1 with (1/2) * L₂ :

(1/2) * (1/2) * L₂  * I₁² = (1/2) * L₂ * I₂²

Now, we can simplify the equation and find the ratio, i₁/i₂,:

I₁² / I₂²= 1

Taking the square root of both sides:

i₁/ i= 1

So, the ratio of the currents in the two inductors, i₁/i₂, is 1.

To know more about current visit :-

https://brainly.com/question/1100341

#SPJ11

The temperature of 1.00 L of gasoline rises from 30°C to 50°C, the volume of the gasoline will increase by (50 - 30) x 950 x 10-6 cm³ = 12 cm³.

Temperature is a measure of the average kinetic energy of the particles in a system. It is measured in degrees Celsius (°C), Fahrenheit (°F) or Kelvin (K) and is used to describe the intensity of heat in an object or environment. Temperature is an important factor in determining the state of a system and the properties of its components.

The volume coefficient of thermal expansion for gasoline is 950 x 10-6 K-1, which means that the volume of 1.00 L of gasoline will increase by 950 x 10-6 cm³ for every 1 degree Celsius increase in temperature.

Therefore, when the temperature of 1.00 L of gasoline rises from 30°C to 50°C, the volume of the gasoline will increase by (50 - 30) x 950 x 10-6 cm3 = 12 cm³.

To learn more about temperature
https://brainly.com/question/27944554
#SPJ4

The wavelength of the X-ray photon is 0.2034 nm.

To determine the wavelength of an X-ray photon produced by electrons accelerated through a potential difference of 61 kV, we can use the equation:

λ = (h * c) / (e * V)

where λ is the wavelength, h is Planck's constant (6.626 x 10^-34 Js), c is the speed of light (3 x 10^8 m/s), e is the elementary charge (1.602 x 10^-19 C), and V is the potential difference in volts (61,000 V).

λ = (6.626 x 10^-34 Js * 3 x 10^8 m/s) / (1.602 x 10^-19 C * 61,000 V)

λ = 2.034 x 10^-10 m

To convert this to nanometers, multiply by 10^9:

λ = 2.034 x 10^-10 m * 10^9 nm/m = 0.2034 nm

So, the wavelength of the X-ray photon is 0.2034 nm.

To learn more about photon, refer below:

https://brainly.com/question/20912241

#SPJ11

This expression gives us the remaining storage space in the vector, which represents the number of additional values that can be stored in it without needing to reallocate memory.

Assuming v is a vector that has been declared and initialized, the expression you're looking for is v.capacity() - v.size(). Here's a brief explanation:

1. v.capacity(): This function returns the current storage capacity of the vector v. The capacity represents the total number of elements that v can store without having to reallocate its memory.

2. v.size(): This function returns the current number of elements stored in the vector v.

To find out the number of additional values that can be stored in v, we need to subtract the current size of the vector from its capacity: v.capacity() - v.size().

For more about vector:

https://brainly.com/question/31551501

#SPJ11

The force between two wires 0.50 m long, if there is 0.15m between them and the first wire has 2.0 A has 6.67 × 10 ⁻⁶ N .

Given , length of wire L = 0.50 m

Distance between them  d = 0.15 m

current in the first wire be I₁ = 2.0 A

current in the second wire be I₂ = 5.0 A

                    Force = μI₁ i₂ l / 2 π d

                     4 π × 10⁻⁷ × 2 × 5 × 0.5 ÷ 2π × 0.15

          Force = 6.67 × 10 ⁻⁶ N

When two current-carrying wires are placed parallel to one another, their magnetic fields will interact, creating a force between them. Each wire experiences the same amount of force, but in opposite directions. Even if the conductors carry currents of varying magnitudes, this holds true: currents flowing in the same direction attract the conductors, while currents flowing in the opposite direction repel them.

Learn more about force :

brainly.com/question/31645709

#SPJ4

If the mechanical advantage of a lever is 3 and the input distance (effort arm) is 12 meters, the output distance (load arm) would be 4 meters.

To solve this problem, we can use the formula for mechanical advantage: MA = output force / input force = input distance / output distance.

Since we know that the mechanical advantage is 3 and the input distance is 12 meters, we can plug in those values to solve for the output distance:
3 = input distance / output distance
3(output distance) = 12
output distance = 12 / 3
output distance = 4 meters
So the output distance (load arm) would be 4 meters.

It's important to remember that in a lever, the mechanical advantage depends on the ratio of the length of the effort arm to the length of the load arm. In this case, a mechanical advantage of 3 means that the effort arm is three times longer than the load arm. By knowing one of the distances, we can solve for the other.

Learn more about mechanical advantage here:

https://brainly.com/question/16617083

#SPJ11

The reaction between sodium and chlorine gas that releases 787 kJ/mol is an exothermic reaction. The q value for this reaction would be -787 kJ/mol.

In an exothermic reaction, energy is released from the system to the surroundings in the form of heat. This is indicated by a negative value for q, the heat released or absorbed during a chemical reaction. The fact that energy is released in this reaction, as indicated by the negative value of the q value, confirms that this is an exothermic reaction.Since the reaction involves the combination of one mole of sodium and one mole of chlorine to form one mole of sodium chloride, we can assume that one mole of either sodium or chlorine is the limiting reactant.

To learn more about exothermic reaction:

https://brainly.com/question/10373907

#SPJ11

Retrograde refers to the apparent backwards motion of a planet in its orbit as observed from Earth. Venus undergoes retrograde motion approximately once every 19 months.

Retrograde motion occurs when planets appear to move backwards in their orbit as observed from Earth. This happens because planets in our solar system orbit the Sun at different speeds, and as Earth passes them in its orbit, it can appear as if they are moving backwards. Venus, being an inner planet, orbits the Sun faster than Earth. When Earth catches up to Venus and passes it in its orbit, Venus appears to move backwards in the sky. This is known as retrograde motion.

Retrograde motion is an important phenomenon to study because it helps astronomers understand the motion of the planets in our solar system. For Venus in particular, its retrograde motion can be used to calculate its distance from Earth, which is useful in determining the planet's orbit and other characteristics.

To know more about retrograde motion, visit:

https://brainly.com/question/29823621

#SPJ11

In an electrochemical cell, the charge is carried by ions in solution. Specifically, in the half-cell where oxidation occurs, negatively charged ions called anions are produced and move into the solution.

In the half-cell where reduction occurs, positively charged ions called cations are produced and move into the solution. The movement of these ions creates a potential difference between the two half-cells, which is what drives the flow of electrons through the external circuit. In the external circuit, the charge is carried by the flow of electrons from the anode to the cathode, which allows for the reduction and oxidation reactions to occur and maintains the balance of charges within the cell.
Hi, I'm happy to help you with your question! In an electrochemical cell, the charge in the solution is carried by ions. Ions are charged particles that form when atoms gain or lose electrons. Positive ions (cations) and negative ions (anions) move towards their respective electrodes, completing the internal circuit. In the external circuit, the charge is carried by electrons. Electrons flow from the anode (negative electrode) to the cathode (positive electrode) through an external conductor, such as a wire. This flow of electrons generates an electric current, which can be harnessed to do work or power electronic devices.

To know more about charge visit:

https://brainly.com/question/3412043

#SPJ11

The magnitude of the change in momentum of the lighter object will be less than the magnitude of the change in momentum of the heavier object.

This is due to the fact that momentum is equal to mass times velocity, and since the mass of the lighter object is less than the mass of the heavier object, it will take less force to move the lighter object the same distance as the heavier object, resulting in a smaller change in momentum.

Additionally, since the force on the two objects is the same, the heavier object will have a greater acceleration due to its greater mass, resulting in a greater change in velocity and thus a greater change in momentum.

Know more about force here

https://brainly.com/question/13191643?referrer=searchResults

#SPJ11

Answer: We can find the center of mass of the system by using the formula:

x_cm = (m1x1 + m2x2 + m3x3)/(m1 + m2 + m3)

where x_cm is the position of the center of mass, m1, m2, and m3 are the masses of the man, woman, and canoe, respectively, and x1, x2, and x3 are their respective positions relative to an origin we choose.

Let's choose the origin to be at the man's position. Then the woman is at a distance of 6 m from the origin. To find the position of the canoe's center of mass, we need to know where the canoe's center of mass is located relative to the origin. Let's assume that the canoe's center of mass is at its geometrical center, which is at a distance of 3 m from each end.

Using these values, we can calculate the position of the center of mass of the system relative to the man:

x_cm = (m1x1 + m2x2 + m3x3)/(m1 + m2 + m3)

x_cm = (72 kg)(0 m) + (55 kg)(6 m) + (23 kg)(3 m)/(72 kg + 55 kg + 23 kg)

x_cm = 333/50 ≈ 6.66 m

Therefore, the center of mass of the system is 6.66 m from the man's position.

The image of your face in a small convex mirror would be smaller and appear upside down. This is because convex mirrors curve outward, causing light rays to diverge, and creating a virtual image that is smaller than the original object.

In explanation, when light rays reflect off a convex mirror, they spread out and do not converge at a point like they would with a concave mirror.

This causes the image to be smaller and appear upside down.

This is because convex mirrors curve outward, causing light rays to diverge, and creating a virtual image that is smaller than the original object

In summary, holding a small convex mirror in front of your face would produce a smaller, upside-down image of your face due to the outward curvature of the mirror causing light rays to diverge.

Learn more about convex click here:

https://brainly.com/question/28039799

#SPJ11

False. The water cycle is a much more complex process that involves multiple steps. The sun's energy causes water to evaporate from the ocean, but it also causes evapotranspiration from plants and other sources.

This water vapor rises into the atmosphere and condenses into clouds. Eventually, the clouds release their moisture as precipitation, which can fall back into bodies of water or onto land. This water can then infiltrate the ground and become groundwater, or flow into rivers and other bodies of water, where the cycle begins again.

So, while the sun's energy is an important factor in the water cycle, it is not the only factor and the process is much more intricate than simply warming the ocean.

To know more about water cycle, refer

https://brainly.com/question/2164391

#SPJ11

The net magnetic force on each side of triangle will be 0, when A loop of wire has the shape of a right triangle and carries a current of i = 4.10A  .

When a moving charged particle (such an electron or a proton) is placed in a magnetic field, a magnetic force is applied to it. The right-hand rule provides the direction of the magnetic force, which is always perpendicular to the magnetic field and charged particle velocity. The magnetic force acting on a current-carrying wire is the force generated by the magnetic field as a result of the motion of the charges (electron mobility) within the wire. The strength and direction of the magnetic field, the current flowing through the wire, and the orientation of the wire with respect to the magnetic field all affect the magnitude and direction of the magnetic force.

The magnetic force can be calculated by the formula,

F = BI L sinθ

AB ,  θ = -180°

Fab = 0N

For, Fac , θ = 90°

Fac = 1.6× 4.10 ×L× sin90°

ac = AB tan 55°

ac = 2.85m

Fac = 1.6 × 4.10 × 2.85× sin90°

Fac = 18.6N

The above magnetic force into the page is 18.6N. Thus similarly out of the page magnetic field can be calculated as, Fbc = 18.6 N

Fnet = Fab + Fbc +Fac

Fnet = 0 + 18.6 - 18.6

Fnet = 0net

To know more about current

https://brainly.com/question/31700111

#SPJ4

The complete question is,

A loop of wire has the shape of a right triangle (see the drawing) and carries a current of I = 4.10 A. A uniform magnetic field is directed parallel to side AB and has a magnitude of 1.60 T 55.0 2.00 m (a) Find the magnitude and direction of the magnetic force exerted on each side of the triangle. N directed N directed. Select N directed Select- Select side AC side CB side BA

i. The open circuit voltage is 0.684 V. ii. The maximum power is 207.9 W/m² and the corresponding voltage is 0.546 V. iii. The maximum efficiency is 23.1%. iv. The cell surface area needed is 7.7 m².

i. The open circuit voltage can be calculated using the Shockley diode equation, which is given by V_OC = (kT/q) ln(I_SC/I_0 + 1), where k is the Boltzmann constant, T is the temperature in Kelvin, q is the electronic charge, I_SC is the short circuit current density, and I_0 is the reverse saturation current density. Plugging in the values, we get V_OC = 0.684 V.

ii. The maximum power density can be calculated using the equation P_max = (V_m²/R) * (I_m/2), where V_m is the voltage at maximum power, I_m is the current at maximum power, and R is the load resistance. Solving for V_m and I_m using the diode equation and Ohm's law, we get V_m = 0.546 V and I_m = 370 A/m², which gives P_max = 207.9 W/m².

iii. The maximum efficiency can be calculated using the equation η_max = P_max / (solar flux x cell area), where solar flux is the power per unit area received by the cell surface. Plugging in the values, we get η_max = 23.1%.

iv. The cell area needed to supply 1600 W of electricity can be calculated by dividing the power by the maximum power density, which gives 1600 / 207.9 = 7.7 m².

To learn more about power density, here

https://brainly.com/question/17198884

#SPJ4

Answer:

Wave Amplitude and Energy.

Roshan Mandal

Which describes the amplitude of a wave when it carries more energy?.

The amplitude of a wave does not necessarily determine the amount of energy it carries. The energy carried by a wave depends on its frequency, wavelength, and the medium through which it travels.

However, in some cases, an increase in the amplitude of a wave can indicate that it is carrying more energy. For example, in a sound wave, an increase in amplitude (i.e., louder sound) can indicate that more energy is being transferred from the source of the sound wave to the surrounding environment. Similarly, in an electromagnetic wave, such as light, an increase in amplitude can indicate that more energy is being transferred from the source of the wave to the surrounding space.

So while there is no direct relationship between the amplitude of a wave and the amount of energy it carries, an increase in amplitude can sometimes be an indicator of increased energy transfer.

The answer  is that the fraction of a piece of copper that will be submerged when it floats in mercury is equal to the ratio of the densities of copper and mercury.

When an object floats in a fluid, it displaces an amount of fluid equal to its own weight. If the weight of the object is less than the weight of the fluid it displaces, the object will float. The fraction of the object that is submerged depends on the density of the object relative to the density of the fluid.

In this case, copper has a density of 8.96 g/cm3, while mercury has a density of 13.53 g/cm3. The ratio of the densities is 8.96/13.53 = 0.662.

Therefore, when a piece of copper floats in mercury, approximately 66.2% of the volume of the copper will be submerged in the mercury.

To know more about density visit:

brainly.com/question/29775886

#SPJ11

The angular acceleration of the wheels is 93.75 radians per second squared.

Acceleration is the rate at which the velocity of an object changes over time. It is a vector quantity, meaning it has both a magnitude and a direction. Acceleration is usually measured in meters per second squared (m/s2) and is determined by dividing the change in velocity by the amount of time it takes for that change to occur. Acceleration can be caused by a number of factors such as a net force, gravity, or friction. Acceleration can also be negative, which is known as deceleration and occurs when an object's velocity decreases.

The angular acceleration of the wheels can be calculated using the equation:

ω = v/r

where ω is the angular acceleration (in radians per second squared), v is the linear velocity (in meters per second), and r is the radius of the wheel (in meters).

Therefore, the angular acceleration of the wheels can be calculated as follows:

ω = (30.0 m/s) / (0.320 m)

ω = 93.75 radians/s^2

To learn more about acceleration

https://brainly.com/question/460763

#SPJ4

There are several terms used to describe how material moves during mass movement. These include fall, flow, debris, and mud slide.

A fall occurs when material drops vertically due to gravity. Flow refers to material moving downhill as a viscous fluid, often due to saturation with water. Debris describes a mixture of materials, such as rocks, soil, and vegetation, moving together as a single mass. Finally, a mud slide is a type of flow specifically involving soil that has become saturated with water, causing it to flow downhill as a thick slurry. All of these terms are used to describe different types of mass movement and the way in which materials move during them.

Learn more about flow debris:

https://brainly.com/question/28474846

#SPJ11

Trucks stopping on wet or slippery surfaces can increase their stopping distance significantly. The increased stopping distance is due to reduced tire traction and poor road conditions.

The stopping distance can vary depending on various factors such as vehicle speed, tire condition, road surface condition, and brake system condition. On a dry road, a truck traveling at 60 miles per hour can take about 250 feet to come to a complete stop. However, on a wet or slippery road, the stopping distance can increase by up to two times, meaning it can take up to 500 feet or more for a truck to stop completely. This is because water and other contaminants reduce the friction between the tire and the road surface, reducing the tire's ability to grip the road surface and bring the vehicle to a stop.

Therefore, it is essential for truck drivers to maintain a safe distance from other vehicles, drive at slower speeds, and take extra caution when stopping on wet or slippery surfaces to avoid accidents due to increased stopping distances.

To know more about distance please visit:

https://brainly.com/question/13034462

#SPJ11

The wave behavior responsible for this phenomena is called resonance. Resonance occurs when the frequency of an object's vibration matches or is close to the frequency of an incoming wave.

Frequency is defined as the rate at which an event occurs, or the number of occurrences of an event within a given period of time. It can also refer to the number of times something is repeated, such as in a sound or radio wave. Frequency is typically expressed as the number of cycles per second, or Hertz (Hz). Frequency is an important concept in physics, mathematics, and engineering, as it is used to describe the behavior of waves, sound, and other forms of energy. Frequency is also used in communication systems and signal processing to refer to the rate of data transmission.

To learn more about frequency

https://brainly.com/question/254161

#SPJ4

After the collision, the ball that was initially moving at 2.0 m/s will be moving at 3.00 m/s in the opposite direction, while the ball that was initially moving at 3.00 m/s will be moving at 2.0 m/s in the opposite direction.

This result can be obtained by applying the principle of conservation of momentum and the principle of conservation of kinetic energy. Since the collision is perfectly elastic, the total kinetic energy of the system is conserved. The initial momentum of the system is zero, since the balls are moving in opposite directions with equal and opposite momenta. Therefore, the final momentum of the system must also be zero.

Using these principles, we can solve for the final velocities of the balls using the following equations:

m1v1i + m2v2i = m1v1f + m2v2f    (conservation of momentum)

(1/2)m1v1i^2 + (1/2)m2v2i^2 = (1/2)m1v1f^2 + (1/2)m2v2f^2  (conservation of kinetic energy)

Plugging in the given values, we get:

m1v1i + m2v2i = m1v1f + m2v2f

(1/2)m1v1i^2 + (1/2)m2v2i^2 = (1/2)m1v1f^2 + (1/2)m2v2f^2

Substituting m1 = m2 and solving for v1f and v2f, we get:

v1f = v2i

v2f = v1i

Plugging in the given values, we get:

v1f = 3.00 m/s

v2f = 2.0 m/s

Therefore, after the collision, the ball that was initially moving at 2.0 m/s will be moving at 3.00 m/s in the opposite direction, while the ball that was initially moving at 3.00 m/s will be moving at 2.0 m/s in the opposite direction.

Learn more about direction here:

https://brainly.com/question/30636941

#SPJ11

Angular momentum is a vector quantity that describes the rotation of an object around a fixed axis. The direction of the angular momentum vector is determined by the direction of the object's rotation and the axis of rotation.

For the minute hand of a clock, the direction of the angular momentum vector is towards the mechanism of the clock when viewed from the back of the clock and towards the glass of the clock when viewed from the front of the clock. This is because the minute hand rotates around the axis of the clock's mechanism, which is perpendicular to the face of the clock.

For the right front tire of a car moving backwards, the direction of the angular momentum vector is to the right, away from the car when viewed from the front of the car, and to the left, towards the center of the car when viewed from the top of the car. This is because the tire rotates around its axis, which is perpendicular to the direction of motion of the car.

For an ice skater spinning clockwise, the direction of the angular momentum vector is downward when viewed from above the skater. This is because the skater rotates around an axis perpendicular to the ground, and the angular momentum vector points in the direction of the skater's thumb when the fingers of their right hand curl in the direction of rotation.

In conclusion, the direction of the angular momentum vector depends on the direction of rotation and the axis of rotation, and it can be determined using the right-hand rule.

For more about Angular momentum:

https://brainly.com/question/30656024

#SPJ11

Answer:

The cosmological  constant accounts for the effects of dark energy.

Explanation:

The cosmological constant was first introduced by Albert Einstein, in 1917.

It was defined in the general relativity and it is used to represent a repulsive force in the expansion of the universe.

Vacuum Energy causes the cosmological constant.

For more explanation of general relativity, refer

https://brainly.in/question/65061

The average translational kinetic energy of an ideal gas at 297 K is 1.70 x [tex]10^{20}[/tex] J.

What is Kinetic Energy?

Kinetic energy is the energy that an object possesses due to its motion. It is a scalar quantity that depends on the mass and velocity of the object. The formula for kinetic energy is KE = 1/2 m[tex]v^{2}[/tex], where KE is kinetic energy, m is the mass of the object, and v is its velocity.

The average translational kinetic energy of an ideal gas is given by the equation:

KE = (3/2) kT

where KE is the average kinetic energy, k is the Boltzmann constant, and T is the absolute temperature.

Substituting k = 1.38 × [tex]10^{-23}[/tex] J/K, we get:

KE = (3/2) × 1.38 × [tex]10^{-23}[/tex] J/K × T

Rearranging, we get:

T = (2/3) KE / (1.38 × 10^-23 J/K)

Substituting KE = 1.70 × [tex]10^{20}[/tex] J, we get:

T = (2/3) × 1.70 × [tex]10^{-20}[/tex] J / (1.38 × [tex]10^{-23}[/tex]J/K) = 297 K

Learn more about Kinetic Energy from the given link

https://brainly.com/question/8101588

#SPJ4

The arc length subtended by an angle of 30 degrees on a circle of radius 10 cm is approximately 5.236 cm.

The arc length (s) subtended by an angle (θ) in radians on a circle of radius (r) can be calculated using the formula:

s = rθ

However, in this problem, the angle is given in degrees, so we first need to convert it to radians using the formula:

θ (in radians) = (π/180) × θ (in degrees)

Substituting the given values, we get:

θ = (π/180) × 30 degrees

θ = 0.5236 radians (rounded to four decimal places)

Now we can use the formula for arc length to find the answer:

s = rθ

s = 10 cm × 0.5236

s = 5.236 cm (rounded to three decimal places)

To know more about arc length, please click on:

https://brainly.com/question/29141691

#SPJ11

If you were to grab the edge of the spinning wheel on a merry-go-round, it would cause the entire ride to slow down and eventually come to a stop. This is because the momentum of the spinning wheel, which is connected to the entire ride, is suddenly stopped by your hand.

The rest of the ride can't keep moving at the same speed because it's all connected and the momentum is lost.
It's important to note that stopping the spinning wheel can be dangerous, as the sudden stop can cause anyone on the ride to be thrown off or injured. It's important to follow all safety guidelines and not attempt to stop the ride on your own.
In addition, if the spinning wheel is part of the mechanism that powers the ride, stopping it could cause the entire ride to shut down or malfunction. In general, it's best to leave the operation and maintenance of amusement park rides to trained professionals.

To know more about momentum visit :

https://brainly.com/question/30677308

#SPJ11